Nanoparticle-Based Tough Polymers with Crack-Propagation Resistance.

Although thin elastomer films of polymer nanoparticles are regarded as environmentally friendly materials, the low mechanical strength of the films limits their use in various applications. In the present study, we investigated the fracture resistance of latex films composed of acrylic nanoparticles where a small quantity of a rotaxane crosslinker was introduced. In contrast to conventional nanoparticle-based elastomers, the latex films composed of the rotaxane-crosslinked nanoparticles exhibited unusual crack propagation behavior; the direction of crack propagation changed from a direction parallel to the crack to one perpendicular to the crack, resulting in an increase in tear resistance. These findings will help to broaden the scope of design of new types of tough polymers composed of environmentally friendly polymer nanoparticles.

The Effect of the Axle End Structure and Number of Through-Space Bonds on the Properties of Rotaxane Crosslinked Polymers.

A rotaxane crosslinker (RC) is known to toughen the resulting rotaxane crosslinked polymer (RCP) via a stress dispersion effect that is attributed to the movable nature of the crosslinking structure. To evaluate this toughening mechanism in detail, a series of structure-definite RCs equipped with different axle end structures or different numbers of wheel components were synthesized, and subjected to free radical polymerization with a vinyl monomer to obtain RCPs. Analyses of the obtained RCPs revealed that the size of the axle end structure should be well-balanced to produce a strong toughening effect, and a [3]rotaxane crosslinker works more effectively than [2]rotaxane to toughen RCPs. The mobility of the crosslinking points, in terms of rotational and flipping movements, was more crucial to toughening the RCP than that of translational movement along the axle. The first observation of the above crucial findings proved the utility of the systematic molecular design used in this study.

Efficient Transformation of Polymer Main Chain Catalyzed by Macrocycle Metal Complexes via Pseudorotaxane Intermediate.

Post-synthesis modification of polymers streamlines the synthesis of functionalized polymers, but is often incomplete due to the negative polymer effects. Developing efficient polymer reactions in artificial systems thus represents a long-standing objective in the fields of polymer and material science. Here, we show unprecedented macrocycle-metal-complex-catalyzed systems for efficient polymer reaction that result in 100 % transformation of the main chain functional groups presumably via a processive mode reaction. The complete polymer reactions were confirmed in not only intramolecular reaction (hydroamination) but also intermolecular reaction (hydrosilylation) by using Pd- and Pt-macrocycle-catalyzed systems. The most fascinating feature of the both reactions is that higher-molecular-weight polymers reach completion faster. Various studies suggested that the reactions occur in the catalyst cavity via the formation of a supramolecular complex between the macrocycle catalyst and polymer substrate like pseudorotaxane, which should be of characteristic of the efficient polymer reactions progressing in a processive mode.

Rotaxane-Based Difunctional Nitrile N-Oxide Crosslinker: Synthesis and Direct Introduction of Movable Crosslinking Points into Ethylene-Propylene-Butadiene Monomer (EPDM) Rubber.

Incorporation of rotaxane scaffolds into the crosslinking points of polymer networks significantly affects their rheological and mechanical properties. The present study involves the synthesis of a new rotaxane-type crosslinker containing nitrile N-oxide functional groups on both the axle and wheel components. The prepared crosslinker is highly reactive; however, it can be isolated and applied in the crosslinking reaction of a commercially important polymer, namely ethylene-propylene-butadiene monomer rubber (EPDM), in the absence of additives and catalysts. Tensile tests reveal that compared to a network containing conventional crosslinking points, both breaking strength and strain of the network structure prepared herein are improved due to the incorporation of movable crosslinking points. The synthesized network structure also exhibits five times higher fracture energy. The developed post-crosslinking methodology for the direct introduction of movable crosslinking points into pre-formed polymers will be valuable in the production of rotaxane materials for various applications.

Quantification for the Mixing of Polymers on Microspheres in Waterborne Latex Films.

Although tremendous efforts have been devoted to the structural analysis and understanding of the toughness of latex films, in which soft elastomer microspheres are interpenetrated, a method to quantitatively analyze the mixing of polymer chains at the microsphere surface, i.e., delocalization of hydrophilic charged group on the polymer chains by aging, has not yet been established. In this study, small-angle X-ray scattering was applied to characterize latex films by assuming a pseudo-two-phase system, which consists of an average-electron density microsphere core and a high-electron density interphase between the microsphere interfaces due to localized charged groups. The thus obtained parameter, i.e., the characteristic interfacial thickness (tinter), quantitatively reflects the degree of mixing of polymer chains on the microsphere surface. We found that tinter is strongly correlated to the fracture energy of the latex films. The proposed analysis method for the microscopic mixing of polymers on the microsphere surface in the film can thus be expected to shed light on design guidelines for industrial latex films and on the understanding of the mechanical properties of such films.

Syntheses of polynorbornadienes by ring-opening metathesis polymerizations of symmetric and non-symmetric 2,3-bis(alkoxycarbonyl)norbornadienes and their conversion to half-ester derivatives.

Libraries of polynorbornadienes were synthesized with good yields with a ruthenium-containing 2nd generation Grubbs catalyst by ring-opening metathesis polymerization (ROMP) of a variety of symmetric and non-symmetric 2,3-bis(alkoxycarbonyl)norbornadiene monomer units prepared from the half-esters obtained efficiently by the selective monohydrolysis reactions of symmetric diesters we reported earlier. Among these polymers, the polynorbornadienes with t-butoxycarbonyl groups derived from non-symmetric monomer units were converted to the half-ester derivatives by deprotection with trifluoroacetic acid, yielding amphiphilic polymers. The hydrogenation reactions of the obtained polymers were carried out to yield polymers having saturated structures in the main chains for improvement of the thermal stabilities. All these polymers were characterized by their molecular weights and thermal properties along with the spectroscopic data. Our selective monohydrolysis reactions have been proven to be a versatile tool for production of relatively homogeneous polymer libraries.

Macrocyclic Dinuclear Palladium Complex as a Novel Doubly Threaded [3]Rotaxane Scaffold and Its Application as a Rotaxane Cross-Linker.

A dinuclear PdII complex possessing a cyclic ligand was developed as a novel doubly threaded [3]rotaxane scaffold and applied as a rotaxane cross-linker reagent. The dinuclear complex (PdMC)2 was prepared by one-step macrocyclization followed by the double palladation reaction. 1 H NMR analysis and UV/Vis measurements revealed the formation of a doubly threaded pseudo[3]rotaxane by the complexation of (PdMC)2 with 2 equivalents of 2,6-disubstituted pyridine 3 through double metal coordination. The treatment of (PdMC)2 with 2 equivalents of 4-vinylpyridine (VP) afforded a doubly threaded [3]rotaxane cross-linker (PdMC-VP)2 . Radical co-polymerization of VP and t-butylstyrene in the presence of (PdMC-VP)2 afforded a stable rotaxane cross-linked polymer (RCP). An elastic RCP was also prepared by using n-butyl acrylate as a monomer. The obtained RCPs exhibited higher swelling ability and higher mechanical toughness compared with the corresponding covalent cross-linked polymers.

Phase Transition Behaviors and Nanoscale Film Morphologies of Poly(δ-valerolactone) Axles Bearing Movable and Fixed Rotaxane Wheels.

In this study, poly(δ-valerolactone) (PVL) axles bearing movable and fixed dibenzo-24-crown-8-ether wheels (rot-M and rot-F) are investigated for the first time in the terms of phase transition and nanoscale film morphology: PVL-rot-M and PVL-rot-F. Interestingly, the PVL axles reveal a strong tendency to form a horizontal lamellar structure with three different rotational crystal lattice domains in nanoscale films. The morphological structural parameters are discernibly varied by the movable and fixed rotaxane wheels. In particular, the rot-M wheel tends to be populated in both the interfacial and amorphous layers. The rot-M wheel is found to significantly influence the phase transition characteristics of the PVL axle because of its movability along the polymer backbone chain. In contrast, the rot-F wheel tends to be more localized in the interfacial layer rather than in the amorphous layer because of its immovability constrained at the polymer chain end. The rot-F wheel causes severe thermal instability in the PVL axle, which can be attributed mainly to the presence of its counter anion (PF6 - ).

33S nuclear quadrupole resonance study of dibenzyl disulfide toward understanding of cross-linked structures in rubber.

Experimental and theoretical investigations of a sulfur-33 electric-field-gradient (EFG) tensor of disulfide bonds in 33S-labled dibenzyl disulfide have been presented. Temperature dependence of quadrupolar frequencies, νQ, is observed in the temperature range between 80 and 280 K, in which single peaks appear in all the 33S nuclear quadrupole resonance (NQR) spectra. Analysis of nutation echo 33S NQR spectra at 200 K yields the quadrupolar coupling constant, CQ value, of 46.8(6) MHz and the asymmetry parameter, ηQ, of 0.48(7). The orientation of the 33S EFG tensor of the disulfide is obtained by quantum chemical calculations: the largest EFG tensor component, VZZ, is approximately perpendicular to the molecular plane (C-S-S), and the smallest component, VXX, is approximately 41° off the C-S bond. Extensive quantum chemical calculations are systematically performed to investigate dependences of 33S EFG tensors on changes of torsion angles in disulfide and trisulfide bonds, indicating that analysis of νQ and CQ values potentially makes it possible to assign the secondary structures of cross-linking in a rubber.

A Guiding Principle for Strengthening Crosslinked Polymers: Synthesis and Application of Mobility-Controlling Rotaxane Crosslinkers.

Three component mobility controlling vinylic rotaxane crosslinkers with two radically polymerizable vinyl groups (RC_Rs) were synthesized to prove that the mobility of the components of the RC_Rs plays a crucial role in determining the properties of rotaxane-crosslinked polymers (RCPs). RC_Rs (R=H, Me, or Et) were obtained from living ring-opening polymerization. RCP_Et was prepared using RC_Et, which exhibits the lowest component mobility. The low component mobility is reflected in inferior mechanical strength and stretching ability in tensile stress tests compared to components with good (R=Me) and high (R=H) mobility. However, RCP_Et exhibited significantly higher stress and strain values than the corresponding covalently crosslinked polymers (CCP_Rs). These results indicate that a suitable component mobility substantially enhances the mechanical strength of RCPs. This behavior could serve as a guiding principle for the molecular design of advanced RCs.

Cyclodextrin-Based [3]Rotaxane-Crosslinked Fluorescent Polymer: Synthesis and De-Crosslinking Using Size Complementarity.

Vinyl-group-substituted, α-cyclodextrin-based, size-complementary [3]rotaxanes were synthesized as crosslinkers for rotaxane-crosslinked poly(methyl methacrylate) (RCP) by radical polymerization. The size complementarity of the crosslinkers made it possible to de-crosslink the RCP by heating, and the degree of decoupling was monitored by fluorescence intensity, depending on the state of the axle component of the rotaxane crosslink moiety.

Synthesis of a Structure-Definite α-Cyclodextrin-Based Macromolecular [3]Rotaxane Using a Size-Complementary Method.

The challenging synthesis of an α-cyclodextrin (CD)-based macromolecular rotaxane with definite structure was fulfilled using a size-complementary method. A new peracetylated (PAc) α-CD-based size-complementary [3]rotaxane was prepared and its thermal dissociation kinetics studied. The de-slippage mechanism was found to be different from that of the native α-CD-based system. PAcα-CD-based size-complementary [3]rotaxanes were employed as initiators for a ring-opening polymerization of ϵ-caprolactone to obtain the macromolecular [3]rotaxanes. Detailed investigation of component dissociation showed the highly movable character of the wheel on the polymer main chain. A general method for controlling the movement of wheels in rotaxane frameworks, even in polymer systems, was established. This will enable the development of new supramolecular architectures and molecular machines.

A Rational Entry to Cyclic Polymers via Selective Cyclization by Self-Assembly and Topology Transformation of Linear Polymers.

A simple and effective synthetic route to cyclic polymers has been developed based on the following sequence: (i) selective cyclization of two self-complementary sec-ammonium-containing crown ether monomers to afford [c2] daisy-chain bifunctional initiators, (ii) living polymerization to afford the corresponding linear polymers, and (iii) a topology transformation of these linear polymers to furnish cyclic polymers. The key step in this sequence is the quantitative cyclization via self-assembly of two crown ether molecules with hydroxyl and sec-ammonium moieties. After the living polymerization, the linear polymers release the daisy-chain assembly to generate a cyclic topology. The specific advantages of the present synthetic protocol, i.e., procedural simplicity and concentration independence, are demonstrated by a gram-scale synthesis.

Formation of Tough Films by Evaporation of Water from Dispersions of Elastomer Microspheres Crosslinked with Rotaxane Supramolecules.

Compared to rigid microspheres that consist, for example, of polystyrene or silica, soft and deformable elastomer microspheres can be used to generate colorless transparent films upon evaporating the solvent from microsphere-containing dispersions. To obtain tough films, a post-polymerization reaction to crosslink the microspheres is usually necessary, which requires extra additives during the drying process. This restriction renders this film-formation technology complex and rather unsuitable for applications in which impurities are undesirable. In the present study, it is demonstrated that tough elastomer microspheres that are crosslinked with rotaxanes can form tough bulk films upon evaporation of water from microsphere dispersions, so that post-polymerization reactions are not required. The results of this study should thus lead to new applications including coatings for biomaterials that need complete removal of all impurities from the materials prior to use.

Induction of Single-Handed Helicity of Polyacetylenes Using Mechanically Chiral Rotaxanes as Chiral Sources.

Effective induction of preferred-handed helicity of polyacetylenes by pendant mechanically chiral rotaxanes is discussed. Polyacetylenes possessing optically active mechanically chiral rotaxanes in the side chains were synthesized by the polymerization of the corresponding enantiopure [2]rotaxane-type ethynyl monomers prepared by the chiral-phase HPLC separations. The CD Cotton effects revealed that the polyacetylenes took preferred-handed helical conformations depending on the rotaxane chirality. The preferred-handed helix was not disturbed by an additional chiral substituent on the rotaxane side chain. These results demonstrate the significance and utility of mechanically chiral rotaxanes for the effective construction of asymmetric fields.

Decoupled Thermo- and pH-Responsive Hydrogel Microspheres Cross-Linked by Rotaxane Networks.

Rotaxane cross-linked (RC) microgels that exhibit a decoupled thermo- and pH-responsive volume transition were developed. The pH-induced changes of the aggregation/disaggregation states of cyclodextrin in the RC networks were used to control the swelling capacity of the entire microgels. Different from conventional thermo- and pH-responsive microgels, which are usually obtained from copolymerizations involving charged monomers, the RC microgels respond to temperature as intended, even in the presence of charged functional molecules such as dyes in the microgel dispersion. The results of this study should lead to new applications, including drug delivery systems that require a retention of their smart functions even in environments that may contain foreign ions, for example, in in vivo experiments.

Efficient Synthesis of Cyclic Block Copolymers by Rotaxane Protocol by Linear/Cyclic Topology Transformation.

High-yielding synthesis of cyclic block copolymer (CBC) using the rotaxane protocol by linear-cyclic polymer topology transformation was first demonstrated. Initial complexation of OH-terminated sec-ammonium salt and a crown ether was followed by the successive living ring-opening polymerizations of two lactones to a linear block copolymer having a rotaxane structure by the final capping of the propagation end. CBC was obtained in a high yield by an exploitation of the mechanical linkage through the translational movement of the rotaxane component to transform polymer structure from linear to cyclic. Furthermore, the change of the polymer topology was translated into a macroscopic change in crystallinity of the block copolymer.

Structural Analysis and Inclusion Mechanism of Native and Permethylated α-Cyclodextrin-Based Rotaxanes Containing Alkylene Axles.

Native α-cyclodextrin- (α-CD) and permethylated α-CD (PMeCD)-based rotaxanes with various short alkylene chains as axles can be synthesized through a urea end-capping method. Native α-CD tends to form [3]- or [5]pseudorotaxanes and not [2]- or [4]pseudorotaxanes, which indicates that the coupled CDs act as a single fragment. End-capping reactions of the pseudorotaxanes with C18 and C24 axle lengths do not occur because the axle termini are covered by the densely stacked CDs. The number of PMeCDs on the pseudorotaxane is flexible and mainly depends on the axle length. Peracetylated α-CD (PAcCD)-based rotaxanes are synthesized through O-acetylation of the α-CD-based rotaxanes without any decomposition of the rotaxanated structures. The structures of PMeCD-based [3]- and [4]rotaxanes, and the molecular dynamics calculations on [3]pseudorotaxanes, indicate that the tail face of PMeCDs is regularly directed toward the axle termini. On the basis of the results obtained, it can be concluded that the directions and numbers of CDs in rotaxanes containing short alkylene chains depend on 1) the interactions between CDs, 2) the length of the alkylene axle, and 3) the interactions between the axle end and tail face of the CD.

Gold-Catalyzed Enantioselective Synthesis, Crystal Structure, and Photophysical/Chiroptical Properties of Aza[10]helicenes.

The enantioselective synthesis of an aza[10]helicene, possessing two pyridone units, has been achieved by the gold-catalyzed intramolecular quadruple hydroarylation of a tetrayne. This aza[10]helicene was successfully converted into a fully aromatic aza[10]helicene, possessing two pyridine units. Structure-photophysical and chiroptical properties relationship in a series of azahelicene isomers has also been disclosed.

Thermotriggered Catalyst-Free Modification of a Glass Surface with an Orthogonal Agent Possessing Nitrile N-Oxide and Masked Ketene Functions.

The thermotriggered modification of surfaces was performed under catalyst-free conditions using an orthogonal agent possessing both nitrile N-oxide and Meldrum's acid moieties. The nitrile N-oxide moiety of the orthogonal agent successfully underwent catalyst-free 1,3-dipolar cycloaddition to unsaturated bonds of glass surfaces to produce Meldrum's acid-functionalized surfaces. The subsequent thermal decomposition of Meldrum's acid moiety in the presence of nucleophiles afforded versatile nucleophile-modified surfaces (e.g., wet, waterproof, and photoactive surfaces). Surface characteristics were investigated with the water contact angle, time-of-flight secondary ion mass spectrometry (TOF-SIMS), and X-ray photoelectron spectroscopy (XPS). In addition, the surface modification of silica nanoparticles using the orthogonal agent was also achieved to evaluate the density of the functional group concentration on the surface.