Development of Lipid Polymer Hybrid Drug Delivery Systems Prepared by Hot-Melt Extrusion.

This study sought to develop polymer-lipid hybrid solid dispersions containing the poorly soluble drug lopinavir (LPV) by hot-melt extrusion (HME). Hence, the lipid and polymeric adjuvants were selected based on miscibility and compatibility studies. Film casting was used to assess the miscibility, whereas thermal, spectroscopic, and chromatographic analyses were employed to evaluate drug-excipient compatibility. Extrudates were obtained and characterized by physicochemical tests, including in vitro LPV dissolution. Preformulation studies led to select the most appropriate materials, i.e., the polymers PVPVA and Soluplus®, the plasticizers polyethylene glycol 400 and Kolliphor® HS15, phosphatidylcholine, and sodium taurodeoxycholate. HME processing did not result in LPV degradation and significantly increased entrapment efficiency (93.8% ± 2.8 for Soluplus® extrudate against 19.8% ± 0.5 of the respective physical mixture). LPV dissolution was also increased from the extrudates compared to the corresponding physical mixtures (p < 0.05). The dissolution improvement was considerably greater for the Soluplus®-based formulation (24.3 and 2.8-fold higher than pure LPV and PVPVA-based extrudate after 120 min, respectively), which can be attributed to the more pronounced effects of HME processing on the average size and LPV solid-state properties in the Soluplus® extrudates. Transmission electron microscopy and chemical microanalysis suggested that the polymer-lipid interactions in Soluplus®-based formulation depended on thermal processing.

Enhanced Skin Permeation of Punicalagin after Topical Application of Pluronic Micelles or Vesicles Loaded with Lafoensia pacari Extract.

Punicalagin, the principal ellagitannin of Lafoensia pacari leaves, has proven antioxidant activity, and standardized extracts of L. pacari can be topically used for skin aging management. We hypothesized that Pluronic nanomicelles or vesicles could solubilize sufficiently large amounts of the standardized extracts of L. pacari and provide chemical stability to punicalagin. The standardized extracts of L. pacari were obtained with an optimized extraction procedure, and the antioxidant activity was characterized. Formulations containing Pluronic at 25% and 35% were obtained with or without Span 80. They were characterized by average diameter, polydispersity index, punicalagin content, physicochemical stability, and rheology. A release and skin permeation study was carried out in vertical diffusion cells. The extraction procedure allowed quantifying high punicalagin content (i.e., 141.61 ± 3.87 mg/g). The standardized extracts of L. pacari showed antioxidant activity for all evaluated methods. Pluronic at 25 and Pluronic at 35 with standardized extracts of L. pacari showed an average diameter of about 25 nm. The addition of Span 80 significantly increased the mean diameter by 15-fold (p < 0.05), indicating the spontaneous formation of vesicles. Pluronic formulations significantly protected punicalagin from chemical degradation (p < 0.05). Pluronic at 25 formulations presented as free-flowing liquid-like systems, while Pluronic at 35 resulted in an increase of about 44-fold in |ƞ*|. The addition of Span 80 significantly reduced the Pluronic sol-gel transition temperature (p < 0.05), indicating the formation of vesicles. Formulations with Span 80 significantly enhanced punicalagin skin permeation compared to formulations without Span 80 (p < 0.05). Formulations with Span 80 were demonstrated to be the most promising formulations, as they allowed significant permeation of punicalagin (about 80 to 315 µg/cm2), which has been shown to have antioxidant activity.

Inorganic pellets containing microsclerotia of Metarhizium anisopliae: a new technological platform for the biological control of the cattle tick Rhipicephalus microplus.

This study was sought to devise pellets containing inorganic materials and microsclerotia of Metarhizium anisopliae strain IP 119 for biological control of Rhipicephalus microplus, the most economically important tick in Brazilian cattle industry. In addition, we evaluated the storage stability of the pellets, their tolerance to ultraviolet radiation (UV-B), and efficacy against ticks under laboratory conditions. Fungal microsclerotia were produced by liquid culture fermentation and mixed with pre-selected inorganic matrices: vermiculite powder, diatomaceous earth, and colloidal silicon dioxide (78:20:2, w/w/w). The microsclerotial pellets were then prepared by a two-stage process involving extrusion and spheronization. Pellet size averaged 525.53 ± 7.74 µm, with a sphericity index of 0.72 ± 0.01, while biomass constituents did not affect the wet mass properties. Conidial production from microsclerotial pellets upon rehydration ranged from 1.85 × 109 to 1.97 × 109 conidia g-1 with conidial viability ≥ 93%. Conidial production from pellets stored at 4 °C was invariable for up to 21 days. Unformulated microsclerotia and microsclerotial pellets were extremely tolerant to UV-B compared with aerial conidia. Engorged tick females exposed to conidia from sporulated pellets applied to soil samples and upon optimal rehydration exhibited shorter oviposition time length, shorter life span, and reduced number of hatched larvae. In summary, microsclerotial pellets of M. anisopliae IP 119 effectively suppressed R. microplus and showed outstanding UV-B tolerance in laboratory tests. Prospectively, this formulation prototype is promising for targeting the non-parasitic stage of this tick on outdoor pasture fields and may offer a novel mycoacaricide for its sustainable management. KEY POINTS: • Pellets with microsclerotia and inorganic materials are innovative for tick control. • Metarhizium microsclerotia show superior UV-B tolerance in relation to conidia. • Pellets of Metarhizium microsclerotia produce infective conidia against ticks.

Development of carvedilol-loaded lipid nanoparticles with compatible lipids and enhanced skin permeation in different skin models.

The study aimed to develop lipid nanoparticles using excipients compatible with carvedilol (CARV) for enhanced transdermal drug delivery. Nanostructured lipid carriers (NLC) were successfully obtained and fully characterised. Franz diffusion cells were used for release and in vitro permeation studies in the porcine epidermis (EP) and full-thickness rat skin. NLC4 and NLC5 (0.5 mg/mL of CARV) presented small size (80.58 ± 1.70 and 116.80 ± 12.23 nm, respectively) and entrapment efficiency of 98.14 ± 0.79 and 98.27 ± 0.99%, respectively. CARV-loaded NLC4 and NLC5 controlled drug release. NLC4 allowed CAR permeation through porcine EP in greater amounts than NLC5, i.e. 11.83 ± 4.71 µg/cm2 compared to 3.06 ± 0.79 µg/cm2. NLC4 increased CARV permeation by 2.5-fold compared to the unloaded drug in rat skin studies (13.73 ± 4.12 versus 5.31 ± 1.56 µg/cm2). NLC4 seems to be a promising carrier for the transdermal delivery of CARV.

Effects of Formulation and Manufacturing Process on Drug Release from Solid Self-emulsifying Drug Delivery Systems Prepared by High Shear Mixing.

This study sought to investigate the influence of formulation and process factors of the high shear mixing (HSM) on the properties of solid self-emulsifying drug delivery systems (S-SEDDS) containing the model drug carvedilol (CAR). Firstly, liquid SEDDS (L-SEDDS) were prepared by mixing castor oil with different proportions of surfactant (Solutol or Kolliphor RH40) and cosolvent (Transcutol or PEG400). A miscible L-SEDDS with high drug solubility (124.3 mg/g) was selected and gave rise to 10% (m/m) CAR loaded-emulsion with reduced particle size. Then, a factorial experimental design involving five component's concentration and two process factors was used to study the solidification of the selected L-SEDDS by HSM. CAR content, diffractometric profile, and in vitro dissolution were determined. Morphological and flow analyses were also performed. Porous and spherical particles with mean sizes ranging from 160 to 210 µm were obtained. Particle size was not affected by any formulation factor studied. Powder flowability, in turn, was influenced by L-SEDDS and crospovidone concentration. CAR in vitro dissolution from S-SEDDS was significantly increased compared to the drug as supplied and was equal (pH 1.2) or lower (pH 6.8) than that determined for L-SEDDS. Colloidal silicon dioxide decreased drug dissolution, whereas an increase in water-soluble diluent lactose and L-SEDDS concentration increased CAR dissolution. The proper selection of liquid and solid constituents proved to be crucial to developing an S-SEDDS by HSM. Indeed, the results obtained here using experimental design contribute to the production of S-SEDDS using an industrially viable process.

Chemical and physical strategies in onychomycosis topical treatment: A review.

Onychomycosis is a fungal infection of the fingernails or toenails caused by dermatophytes, nondermatophytes, moulds, and yeasts. This condition affects around 10-30% people worldwide, negatively influencing patients' quality of life, with severe outcomes in some cases. Since the nail unit acts as a barrier to exogenous substances, its physiological features hampers drug penetration, turning the onychomycosis treatment a challenge. Currently, there are several oral and topical therapies available; nevertheless, cure rates are still low and relapse rates achieves 10-53%. Also, serious side effects may be developed due to long-term treatment. In light of these facts, researchers have focused on improving topical treatments, either by modifying the vehicle or by using some physical technique to improve drug delivery trough the nail plate, hence increasing therapy effectiveness. Therefore, the aim of this paper is to explain these novel alternative approaches. First, the challenges for drug ungual penetration are presented. Then, the chemical and physical strategies developed for overcoming the barriers for drug penetration are discussed. We hope that the information gathered may be useful for the development of safer and more effective treatments for onychomycosis.

Development of a High-Performance Liquid Chromatographic Method for Asiaticoside Quantification in Different Skin Layers after Topical Application of a Centella asiatica Extract.

The topical application of Centella asiatica extract has been commonly used for many different purposes but especially for cosmetic use in the treatment of gynoid lipodystrophy. Asiaticoside, the most active component in this extract, is responsible for its therapeutic activities. However, little is known to date about asiaticoside skin penetration. Thus, an analytical method for asiaticoside quantification in different skin layers after the topical application of C. asiatica extract was developed and skin permeation studies were performed with the plant extract to apply the analytical method developed. An extraction procedure to recover asiaticoside from the biological matrix was also developed. Asiaticoside was assayed by HPLC/UV (high-performance liquid chromatography-ultraviolet detection) using a gradient of ACN (acetonitrile) and 0.2% phosphoric acid (flow rate of 1.0 mL/min). The analytical procedure was validated according to U. S. Food and Drug Administration guidelines. Selectivity was shown, as endogenous skin components did not interfere with the asiaticoside peak. Analytical curve was linear (3 to 60 µg/mL) and the lower limit of quantification was determined (3 µg/mL). Asiaticoside recoveries from skin samples were 95.1% and 66.7% for the stratum corneum and remaining skin, respectively. After 48 h of in vitro permeation studies, a substantial amount of asiaticoside was quantified in the skin layers. The presence of asiaticoside was also detected in the receptor solution of Franz diffusion cells after 48 h (5.81 ± 1.00 µg/mL). The method was reliable and reproducible for asiaticoside quantification in skin samples, thereby making it possible to determine the cutaneous penetration profile of this drug in permeation studies.

Compacted Multiparticulate Systems for Colon-Specific Delivery of Ketoprofen.

Pellet-containing tablets for colon-specific drug delivery present higher targeting efficiency and lower costs when compared with monolithic tablets and pellet-filled capsules, respectively. In this study, pellets containing ketoprofen were coated with different acrylic polymers and submitted to compaction. The influence of formulation and process factors on film integrity was then evaluated. Pellets were prepared via extrusion-spheronization and coated using two acrylic polymers (Eudragit® FS 30 D and Opadry® 94 k28327, PMMA and PMA, respectively). The resulting pellets were mixed with placebo granules and compressed in a hydraulic press. Multiple regression showed that ketoprofen release from pellet-containing tablets is predominantly influenced by pellet content, hardness, friability, and disintegration time. PMA-containing tablets prepared under low compaction force or with low pellet content showed rapid disintegration (<1 min) and ketoprofen release similar to those of uncompressed coated pellets (∼30% at 360 min of experiment). On the other hand, PMMA-containing tablets showed a higher rupture level, and those prepared with higher pellet content gave rise to a non-disintegrating matrix. Coated pellets were shown to be able to target ketoprofen to the colonic region. Targeting capacity was dependent on the physicochemical characteristics of the tablets.

Improvement of enalapril maleate chemical stability by high shear melting granulation.

Enalapril maleate is a widely used drug, which is chemically unstable when mixed with excipients resulting in enalaprilat and diketopiperazine as the main degradation products. The preparation of enalapril sodium salt has been used to improve drug stability in solid dosage forms; however, product rejection is observed when the chemical reaction for obtaining the sodium salt is not completely finished before packaging. In this study, granules were prepared by melting granulation using stearic acid or glyceryl monostearate, with a view to developing more stable enalapril maleate solid dosage forms. The granules were prepared in a laboratory-scale high shear mixer and compressed in a rotary machine. Size distribution, flow properties, in vitro drug release and enalapril maleate chemical stability were evaluated and compared with data obtained from tablets prepared without hydrophobic binders. All formulations showed good physical properties and immediate drug release. The greatest improvement in the enalapril maleate stability was observed in formulations containing stearic acid. This study showed that hot melting granulation could be successfully used to prepare enalapril maleate granules which could substitute the in situ formation of enalapril sodium salt, since they provided better enalapril stability in solid dosage forms.

Supercritical fluid (SCF)-assisted preparation of cyclodextrin-based poly(pseudo)rotaxanes for transdermal purposes.

This study aims to investigate the effect of the preparation of solid dispersions using supercritical CO2 (scCO2) on the physicochemical properties and the performance of supramolecular gels based on polymer-cyclodextrin (CD) interactions (named poly(pseudo)rotaxanes, PPR) envisaging a transdermal administration. Solid dispersions containing Soluplus®, the antihypertensive drug carvedilol (CAR), and CD (αCD or HPßCD) were prepared and characterized by HPLC, XRPD, FTIR, and DSC. PPRs prepared from solid dispersions (SCF gels) and the corresponding physical mixtures (PM gels) were analyzed regarding rheology, morphology, in vitro drug diffusion, and ex vivo drug skin permeation. The application of scCO2 led to the loss of the crystalline lattice of CAR while preserving its chemical identity. On the contrary, αCD crystals were still present in the SCF solid dispersions. SCF gels were more uniform than their corresponding PM, and the supercritical treatment resulted in changes in the rheological behavior, reducing the viscosity. CAR in vitro diffusion was significantly higher (p < 0.05) for the αCD-based SCF gel than its corresponding PM gel. Drug skin permeation showed a significant increase in drug flux from CD-based SCF gels (containing αCD or HPßCD) compared to corresponding PM gels. Additionally, the pretreatment of the skin with αCD exhibited increased CAR permeation, suggesting an interaction between αCD and the skin membrane. Results evidenced that SCF processing decisively modified the properties of the supramolecular gels, particularly those prepared with αCD.

Iontophoresis application for drug delivery in high resistivity membranes: nails and teeth.

Iontophoresis has been vastly explored to improve drug permeation, mainly for transdermal delivery. Despite the skin's electrical resistance and barrier properties, it has a relatively high aqueous content and is permeable to many drugs. In contrast, nails and teeth are accessible structures for target drug delivery but possess low water content compared to the skin and impose significant barriers to drug permeation. Common diseases of these sites, such as nail onychomycosis and endodontic microbial infections that reach inaccessible regions for mechanical removal, often depend on time-consuming and ineffective treatments relying on drug's passive permeation. Iontophoresis application in nail and teeth structures may be a safe and effective way to improve drug transport across the nail and drug distribution through dental structures, making treatments more effective and comfortable for patients. Here, we provide an overview of iontophoresis applications in these "hard tissues," considering specificities such as their high electrical resistivity. Iontophoresis presents a promising option to enhance drug permeation through the nail and dental tissues, and further developments in these areas could lead to widespread clinical use.

Cyclodextrin inclusion complex of a multi-component natural product by hot-melt extrusion.

This study aimed to investigate whether hot-melt extrusion (HME) processing can promote molecular encapsulation of a multi-component natural product composed of volatile and pungent hydrophobic substances (ginger oleoresin (OR)) with cyclodextrins. 6-Gingerol and 6-shogaol, the biomarkers of ginger OR, were quantified by HPLC. Phase-solubility studies were performed using ß-cyclodextrin (ßCD) and hydroxypropyl-ß-cyclodextrin (HPßCD) for ginger OR complexation. Solid complexes were then prepared by thermal (HME)- and solvent (slurry (SL))-based methods. Morphology, thermal behavior, solubility, in vitro dissolution, and in vivo anti-inflammatory activity were evaluated. HPßCD gave rise to AL-type complexes with ginger OR, whereas ßCD led to materials with limited solubility. Ginger OR was complexed with HPßCD by HME without significant change in gingerol and shogaol content. Additionally, thermogravimetric analysis (TGA) suggested higher volatile retention in HME complexes than in SL ones. Shogaol and gingerol solubility and dissolution significantly increased from SL and HME complexes compared with ginger OR. In turn, 1:2 OR/HPßCD HME complex showed higher 6-shogaol solubility than SL, associated with a gradual release. The carrageenan-induced pleurisy test showed that the anti-inflammatory activity of ginger OR was maintained after complexation with HPßCD. The complexes significantly decrease the levels of IL-1ß and inhibit cell migration. HME complex showed performance equivalent to the positive control and superior to the SL material. Taken together, these results indicate that HME can be useful for promoting the molecular encapsulation of complex natural products that contain volatile and thermolabile substances. HME complexes showed better in vivo and in vitro performance than complexes prepared using the solvent-based method.

Development and validation of a simple and rapid liquid chromatography method for the determination of genistein in skin permeation studies.

Genistein (GEN) has potential advantages for topical skin delivery, but no literature data are available for its quantitation in different skin layers, such as the stratum corneum (SC). Therefore, a simple, rapid, selective and sensitive bioanalytical method was developed and validated for GEN quantitation in porcine skin samples following in vitro permeation studies. GEN was assayed by HPLC with UV-Vis detection (270 nm) using 0.5% acetic acid in water-n-propanol-acetonitrile (50 : 2 : 48, v/v/v) as mobile phase (flow-rate of 1.0 mL/min). Specificity was demonstrated since endogenous skin components did not interfere with GEN peak. Standard analytical curve was linear over the concentration range (0.1-60 µg/mL) and the lower limit of quantitation was determined for different skin layers (100 ng/mL). GEN recovery from skin layers ranged from 95.57 to 97.57%. Permeation studies were carried out using an automated vertical diffusion cell apparatus. No fluctuation on the amount of GEN retained in the SC was observed over time, but increasing amounts of the drug were found in deeper layers of the skin. The method was reliable and reproducible for the quantitation GEN in skin samples enabling the determination of the cutaneous penetration profile of this drug in permeation experiments.

Poly(pseudo)rotaxanes formed by mixed micelles and α-cyclodextrin enhance terbinafine nail permeation to deeper layers.

This work aimed to develop water-based formulations for onychomycosis topical treatment using micelles of small pegylated surfactants associated with α-cyclodextrin (αCD) to deliver terbinafine to the nail. Kolliphor® RH40 (RH40) and Gelucire® 48/16 (GEL) single and mixed micelles (RH40:GEL 1:1) were prepared. αCD was added to the surfactants dispersions to form poly(pseudo)rotaxanes (PPR). Formulations were characterized in terms of drug solubilization (3 to 34-fold increase), particle size (9-11 nm) and Z-potential (+0.3 - +1.96 mV), blood compatibility (non-hemolytic), rheological behavior (solid-like viscoelastic properties after 5-10% αCD addition), drug release and interaction with the nail plate. GEL micelles and surfactant-10% αCD PPRs notably hydrated the nail plate. The high viscosity of PPR led to a slower drug release, except for RH40:GEL +10% αCD that surprisingly released terbinafine faster. The RH40:GEL +10% αCD formulation delivered twice more amount of terbinafine to deeper regions of nail plate compared to other formulations. The results evidenced the potential of PPR formed by small pegylated surfactants as a water-based formulation for nail drug delivery.

Combination of lipid nanoparticles and iontophoresis for enhanced lopinavir skin permeation: Impact of electric current on lipid dynamics.

Nanostructured lipid carriers (NLC)-loaded with lopinavir (LPV) were developed for its iontophoretic transdermal delivery. Electronic paramagnetic resonance (EPR) spectroscopy of fatty acid spin labels and differential scanning calorimetry (DSC) were applied to investigate the lipid dynamic behavior of NLC before and after the electrical current. In vitro release and permeation studies, with and without anodic and cathodic iontophoresis were also performed. NLC-LPV had nanometric size (179.0 ± 2.5 nm), high drug load (∼x223C 4.14%) and entrapment efficiency (EE) (∼x223C 80%). NLC-LPV was chemically and physically stable after applying an electric current. The electrical current reduced EE after 3 h (67.21 ± 2.64%), resulting in faster LPV in vitro release. EPR demonstrated that iontophoresis decreased NLC lipid dynamics, which is a long-lasting effect. DSC studies demonstrated that electrical current could trigger the polymorphic transition of NLC and drug solubilization in the lipid matrix. NLC-LPV, combined with iontophoresis, allowed drug quantification in the receptor medium, unlike unloaded drugs. Cathodic iontophoresis enabled the quantification of about 7.9 µg/cm2 of LPV in the receptor medium. Passive NLC-LPV studies had to be done for an additional 42 h to achieve similar concentrations. Besides, anodic iontophoresis increased by 1.8-fold the amount of LPV in the receptor medium, demonstrating a promising antiviral therapy strategy.

Thymol-Loaded Biogenic Silica Nanoparticles in an Aquatic Environment: The Impact of Particle Aggregation on Ecotoxicity.

Thymol, a monoterpene phenol, is used as a natural biocide. To circumvent its chemical instability, we propose use of thymol-loaded biogenic silica nanoparticles (BSiO2 #THY NPs); however, the toxicity of this system for aquatic organisms is unknown. Thus, the present study aimed to evaluate the toxicogenetic effects induced by thymol, BSiO2 NP, and BSiO2 #THY on Artemia salina and zebrafish (Danio rerio) early life stages. We also investigated the impact of BSiO2 aggregation in different exposure media (saline and freshwater). Based on the median lethal concentration at 48 h (LC5048h ), BSiO2 #THY (LC5048h = 1.06 mg/L) presented similar toxic potential as thymol (LC5048h = 1.03 mg/L) for A. salina, showing that BSiO2 had no influence on BSiO2 #THY toxicity. Because BSiO2 aggregated and sedimented faster in A. salina aqueous medium than in the other medium, this NP had lower interaction with this microcrustacean. Thus, BSiO2 #THY toxicity for A. salina is probably due to the intrinsic toxicity of thymol. For zebrafish early life stages, BSiO2 #THY (LC5096h = 13.13 mg/L) was more toxic than free thymol (LC5096h = 25.60 mg/L); however, BSiO2 NP has no toxicity for zebrafish early life stages. The lower aggregation of BSiO2 in the freshwater medium compared to the saline medium may have enhanced thymol's availability for this aquatic organism. Also, BSiO2 #THY significantly induced sublethal effects as thymol, and both were genotoxic for zebrafish. In conclusion, although BSiO2 #THY still needs improvements to ensure its safety for freshwater ecosystems, BSiO2 NP seems to be a safe nanocarrier for agriculture. Environ Toxicol Chem 2021;40:333-341. © 2020 SETAC.

Enhanced nail delivery of voriconazole-loaded nanomicelles by thioglycolic acid pretreatment: A study of protein dynamics and disulfide bond rupture.

This work aimed to select an effective penetration enhancer (PE) for nail pretreatment, develop voriconazole (VOR)-loaded nanomicelles, and evaluate their ability to deliver VOR to the nail. A complete analysis of nail protein dynamics, bond rupture, and microstructure was performed. Alternative methods as electron paramagnetic resonance (EPR) and the Ellman's reagent (DTNB) assay were also evaluated. Nanomicelles were produced and characterized. The PE hydrated the hooves, following the order: urea ≈ cysteine ≈ glycolic acid < thioglycolic acid (TGA) < NaOH. SEM images and methylene blue assay showed enlarged pores and roughness of porcine hooves after incubation with NaOH and TGA. EPR was demonstrated to be the most sensitive technique. DTNB assay quantified higher thiol groups for samples treated with TGA (p < 0.05). A stratigraphic analysis with Raman spectroscopy demonstrated that hooves treated with TGA presented a higher SH/SS ratio at the edges, affecting protein secondary structure. In vitro permeation studies demonstrated significant VOR permeation (29.44 ± 6.13 µg/cm2), 10-fold higher than previous studies with lipid nanoparticles. After TGA pretreatment, VOR permeation was further enhanced (3-fold). TGA pretreatment followed by VOR-loaded nanomicelles demonstrates a promising approach for onychomycosis treatment. The novel methods for protein analysis were straightforward and helpful.

Cyclodextrin-based poly(pseudo)rotaxanes for transdermal delivery of carvedilol.

This work aimed to design supramolecular gels combining Soluplus or Solutol and alfa- and hydroxypropyl-ß-cyclodextrin (α-CD, HPß-CD) for carvedilol (CAR) transdermal delivery. Poly(pseudo)rotaxane formation (appearance, SEM, 1H NMR), drug solubilization, rheological properties and in vitro release were investigated. CAR-CD complexes were prepared in situ or by spray drying. For Solutol, poly(pseudo)rotaxanes were formed immediately after mixing with α-CD and did not influence CAR solubility. Differently, Soluplus poly(pseudo)rotaxanes took 24-48 h to be formed and CAR solubility decreased compared to Soluplus micelles. Soluplus 20% + α-CD (5-10%) showed higher G' and G'' but also faster CAR release than Solutol poly(pseudo)rotaxanes, which is explained by the different location of PEG chains in the two amphiphilic polymers. Faster drug release was achieved incorporating HPß-CD or CAR-HPß-CD spray-dried complexes. The results evidenced the versatility of the formulations in terms of rheological behavior and drug release patterns, which can be adjusted for CAR transdermal delivery.

A Novel Polymer-Lipid Hybrid Nanoparticle for the Improvement of Topotecan Hydrochloride Physicochemical Properties.

BACKGROUND: Topotecan (TPT) is a water-soluble derivate of camptothecin, which undergoes ring-opening hydrolysis in neutral solutions, leading to stability loss and poor cellular uptake. Lipid nanoencapsulation can improve TPT stability, and polymer-lipid hybrid nanoparticles (PLN) are interesting alternatives to improve TPT nanoencapsulation. OBJECTIVE: This study seeks to prepare complexes between the cationic TPT and the negatively charged dextran sulfate (DS) with a view of improving drug loading, chemical stability and release control. METHODS: The optimum ionic molar ratio in DS-TPT complexation was determined, and the selected complex was characterized by FTIR and solid-state 13C NMR. TPT solubility in the free and complexed forms was also assayed. TPT-PLN was then obtained via a microemulsion technique, and particle size, zeta potential, encapsulation efficiency, drug loading and drug recovery were determined. Additionally, the TPT stability and in vitro release were determined from PLN and compared with free TPT, TPT-DS complex and TPT encapsulated in nanostructured lipid carriers (NLC) of similar composition. RESULTS: TPT-DS complexation was confirmed by FTIR and NMR. TPT solubility in the complex was drastically decreased when compared to free TPT. TPT-PLN had high encapsulation efficiency (97%) and drug loading capacity (5.5%). Additionally, TPT-PLN showed a mean diameter, polidispersivity index e zeta potential of 140 nm, 0.2 and -22 mV, respectively. The TPT chemical stability and release from PLN were observed to be superior when compared to NLC. CONCLUSION: PLN has shown to be a more effective nanosystem for TPT nanoencapsulation because TPT loading, stability and release were superior when compared to TPT-NLC.

Removal of azo dye using Fenton and Fenton-like processes: Evaluation of process factors by Box-Behnken design and ecotoxicity tests.

The conventional treatment of textile effluents is usually inefficient in removing azo dyes and can even generate more toxic products than the original dyes. The aim of the present study was to optimize the process factors in the degradation of Disperse Red 343 by Fenton and Fenton-like processes, as well as to investigate the ecotoxicity of the samples treated under optimized conditions. A Box-Behnken design integrated with the desirability function was used to optimize dye degradation, the amount of residual H2O2 [H2O2residual], and the ecotoxicity of the treated samples (lettuce seed, Artemia salina, and zebrafish in their early-life stages). Dye degradation was affected only by catalyst concentration [Fe] in both the Fenton and Fenton-like processes. In the Fenton reaction, [H2O2residual] was significantly affected by initial [H2O2] and its interaction with [Fe]; however, in the Fenton-like reaction, it was affected by initial [H2O2] only. A. salina mortality was affected by different process factors in both processes, which suggests the formation of different toxic products in each process. The desirability function was applied to determine the best process parameters and predict the responses, which were confirmed experimentally. Optimal conditions facilitated the complete degradation of the dye without [H2O2residual] or toxicity for samples treated with the Fenton-like process, whereas the Fenton process induced significant mortality for A. salina. Results indicate that the Fenton-like process is superior to the Fenton reaction to degrade Disperse Red 343.