RESUMO
Multi-stimuli-responsive hydrogels are intelligent materials that present advantages for application in soft devices compared with conventional machines. In this paper, we prepared a bilayer hydrogel consisting of a poly(2-(dimethylamino)ethyl methacrylate) layer and a poly(N-isopropylacrylamide) layer. The hydrogel responded to temperature, pH, NaCl, and ethanol by undergoing bending deformation. At 40 °C, it only took 23 s for the hydrogel to bend nearly 300°. Carbon black was also introduced into the hydrogel network to render it conductive. Based on its multi-stimuli-responsive properties and conductivity, the hydrogel was used to construct a 4-arm gripper, thermistor, and finger movement monitor. The time required to grip and release an object was 141 s. The resistance changed with temperature, which affected the brightness of an LED. Finger motions were monitored, and the bending angle could be distinguished.
RESUMO
In this work, a sulfhydryl-functionalized azobenzene derivative (Azo) was synthesized and polyaniline/silver was modified (PANI/Ag) to make a nanocomposite (PANI/Ag/Azo). A series of characterization techniques like1HNMR, UV-vis absorption spectra, Raman spectra, FT-IR, XRD, SEM, TEM, and TGA was employed to study Azo, PANI/Ag, and PANI/Ag/Azo. Electrochemical properties were measured by cyclic voltammetry (CV) and galvanostatic charging/discharging (GCD). CV showed that UV and blue light had hardly any effect on PANI/Ag. However, with the prolonged exposure time of UV light, the maximum CV current density of PANI/Ag/Azo rose from 1.24 to 2.72 A g-1. Then, after 20 min of blue light irradiation, the maximum current density gradually recovered (from 2.72 to 1.26 A g-1). The GCD also obtained similar results. After formula calculation, the specific capacitance of PANI/Ag/Azo also presented a reversible trend under the alternating irradiation of UV light and blue light. All the results show that PANI/Ag/Azo has a good photoelectric response, and its electrochemical performance can be reversibly adjusted by light. This result provides a new design idea for developing electrode materials with real-time electrochemical properties.