Comb-structured mRNA vaccine tethered with short double-stranded RNA adjuvants maximizes cellular immunity for cancer treatment.

Integrating antigen-encoding mRNA (Messenger RNA) and immunostimulatory adjuvant into a single formulation is a promising approach to potentiating the efficacy of mRNA vaccines. Here, we developed a scheme based on RNA engineering to integrate adjuvancy directly into antigen-encoding mRNA strands without hampering the ability to express antigen proteins. Short double-stranded RNA (dsRNA) was designed to target retinoic acid-inducible gene-I (RIG-I), an innate immune receptor, for effective cancer vaccination and then tethered onto the mRNA strand via hybridization. Tuning the dsRNA structure and microenvironment by changing its length and sequence enabled the determination of the structure of dsRNA-tethered mRNA efficiently stimulating RIG-I. Eventually, the formulation loaded with dsRNA-tethered mRNA of the optimal structure effectively activated mouse and human dendritic cells and drove them to secrete a broad spectrum of proinflammatory cytokines without increasing the secretion of anti-inflammatory cytokines. Notably, the immunostimulating intensity was tunable by modulating the number of dsRNA along the mRNA strand, which prevents excessive immunostimulation. Versatility in the applicable formulation is a practical advantage of the dsRNA-tethered mRNA. Its formulation with three existing systems, i.e., anionic lipoplex, ionizable lipid-based lipid nanoparticles, and polyplex micelles, induced appreciable cellular immunity in the mice model. Of particular interest, dsRNA-tethered mRNA encoding ovalbumin (OVA) formulated in anionic lipoplex used in clinical trials exerted a significant therapeutic effect in the mouse lymphoma (E.G7-OVA) model. In conclusion, the system developed here provides a simple and robust platform to supply the desired intensity of immunostimulation in various formulations of mRNA cancer vaccines.

Carrier-free mRNA vaccine induces robust immunity against SARS-CoV-2 in mice and non-human primates without systemic reactogenicity.

Carrier-free naked mRNA vaccines may reduce the reactogenicity associated with delivery carriers; however, their effectiveness against infectious diseases has been suboptimal. To boost efficacy, we targeted the skin layer rich in antigen-presenting cells (APCs) and utilized a jet injector. The jet injection efficiently introduced naked mRNA into skin cells, including APCs in mice. Further analyses indicated that APCs, after taking up antigen mRNA in the skin, migrated to the lymph nodes (LNs) for antigen presentation. Additionally, the jet injection provoked localized lymphocyte infiltration in the skin, serving as a physical adjuvant for vaccination. Without a delivery carrier, our approach confined mRNA distribution to the injection site, preventing systemic mRNA leakage and associated systemic proinflammatory reactions. In mouse vaccination, the naked mRNA jet injection elicited robust antigen-specific antibody production over 6 months, along with germinal center formation in LNs and the induction of both CD4- and CD8-positive T cells. By targeting the SARS-CoV-2 spike protein, this approach provided protection against viral challenge. Furthermore, our approach generated neutralizing antibodies against SARS-CoV-2 in non-human primates at levels comparable to those observed in mice. In conclusion, our approach offers a safe and effective option for mRNA vaccines targeting infectious diseases.

Droplet Microfluidics Powered Hydrogel Microparticles for Stem Cell-Mediated Biomedical Applications.

Stem cell-related therapeutic technologies have garnered significant attention of the research community for their multi-faceted applications. To promote the therapeutic effects of stem cells, the strategies for cell microencapsulation in hydrogel microparticles have been widely explored, as the hydrogel microparticles have the potential to facilitate oxygen diffusion and nutrient transport alongside their ability to promote crucial cell-cell and cell-matrix interactions. Despite their significant promise, there is an acute shortage of automated, standardized, and reproducible platforms to further stem cell-related research. Microfluidics offers an intriguing platform to produce stem cell-laden hydrogel microparticles (SCHMs) owing to its ability to manipulate the fluids at the micrometer scale as well as precisely control the structure and composition of microparticles. In this review, the typical biomaterials and crosslinking methods for microfluidic encapsulation of stem cells as well as the progress in droplet-based microfluidics for the fabrication of SCHMs are outlined. Moreover, the important biomedical applications of SCHMs are highlighted, including regenerative medicine, tissue engineering, scale-up production of stem cells, and microenvironmental simulation for fundamental cell studies. Overall, microfluidics holds tremendous potential for enabling the production of diverse hydrogel microparticles and is worthy for various stem cell-related biomedical applications.

Hydrophobicity Tuning of Cationic Polyaspartamide Derivatives for Enhanced Antisense Oligonucleotide Delivery.

Various cationic polymers are used to deliver polyplex-mediated antisense oligonucleotides (ASOs). However, few studies have investigated the structural determinants of polyplex functionalities in polymers. This study focused on the polymer hydrophobicity. A series of amphiphilic polyaspartamide derivatives possessing various hydrophobic (R) moieties together with cationic diethylenetriamine (DET) moieties in the side chain (PAsp(DET/R)s) were synthesized to optimize the R moieties (or hydrophobicity) for locked nucleic acid (LNA) gapmer ASO delivery. The gene knockdown efficiencies of PAsp(DET/R) polyplexes were plotted against a hydrophobicity parameter, logD7.3, of PAsp(DET/R), revealing that the gene knockdown efficiency was substantially improved by PAsp(DET/R) with logD7.3 higher than -2.4. This was explained by the increased polyplex stability and improved cellular uptake of ASO payloads. After intratracheal administration, the polyplex samples with a higher logD7.3 than -2.4 induced a significantly higher gene knockdown in the lung tissue compared with counterparts with lower hydrophobicity and naked ASO. These results demonstrate that the hydrophobicity of PAsp(DET/R) is crucial for efficient ASO delivery in vitro and in vivo.

Ionizable Polymeric Micelles with Phenylalanine Moieties Enhance Intracellular Delivery of Self-Replicating RNA for Long-Lasting Protein Expression In Vivo.

mRNA-based therapeutics are revolutionizing the landscape of medical interventions. However, the short half-life of mRNA and transient protein expression often limits its therapeutic potential, demanding high treatment doses or repeated administrations. Self-replicating RNA (RepRNA)-based treatments could offer enhanced protein production and reduce the required dosage. Here, we developed polymeric micelles based on flexible poly(ethylene glycol)-poly(glycerol) (PEG-PG) block copolymers modified with phenylalanine (Phe) moieties via biodegradable ester bonds for the efficient delivery of RepRNA. These polymers successfully encapsulated RepRNA into sub-100 nm micelles assisted by the hydrophobicity of the Phe moieties and their ability to π-π stack with the bases in RepRNA. The micelles made from Phe-modified PEG-PG (PEG-PG(Phe)) effectively maintained the integrity of the loaded RepRNA in RNase-rich serum conditions. Once taken up by cells, the micelles triggered a pH-responsive membrane disruption, promoted by the strong protonation of the amino groups at endosomal pH, thereby delivering the RepRNA to the cytosol. The system induced strong protein expression in vitro and outperformed commercial transfecting reagents in vivo, where it resulted in enhanced and long-lasting protein expression.

mRNA vaccine designs for optimal adjuvanticity and delivery.

Adjuvanticity and delivery are crucial facets of mRNA vaccine design. In modern mRNA vaccines, adjuvant functions are integrated into mRNA vaccine nanoparticles, allowing the co-delivery of antigen mRNA and adjuvants in a unified, all-in-one formulation. In this formulation, many mRNA vaccines utilize the immunostimulating properties of mRNA and vaccine carrier components, including lipids and polymers, as adjuvants. However, careful design is necessary, as excessive adjuvanticity and activation of improper innate immune signalling can conversely hinder vaccination efficacy and trigger adverse effects. mRNA vaccines also require delivery systems to achieve antigen expression in antigen-presenting cells (APCs) within lymphoid organs. Some vaccines directly target APCs in the lymphoid organs, while others rely on APCs migration to the draining lymph nodes after taking up mRNA vaccines. This review explores the current mechanistic understanding of these processes and the ongoing efforts to improve vaccine safety and efficacy based on this understanding.

Facile Generation of Heterotelechelic Poly(2-Oxazoline)s Towards Accelerated Exploration of Poly(2-Oxazoline)-Based Nanomedicine.

Controlling the end-groups of biocompatible polymers is crucial for enabling polymer-based therapeutics and nanomedicine. Typically, end-group diversification is a challenging and time-consuming endeavor, especially for polymers prepared via ionic polymerization mechanisms with limited functional group tolerance. In this study, we present a facile end-group diversification approach for poly(2-oxazoline)s (POx), enabling quick and reliable production of heterotelechelic polymers to facilitate POxylation. The approach relies on the careful tuning of reaction parameters to establish differential reactivity of a pentafluorobenzyl initiator fragment and the living oxazolinium chain-end, allowing the selective introduction of N-, S-, O-nucleophiles via the termination of the polymerization, and a consecutive nucleophilic para-fluoro substitution. The value of this approach for the accelerated development of nanomedicine is demonstrated through the synthesis of well-defined lipid-polymer conjugates and POx-polypeptide block-copolymers, which are well-suited for drug and gene delivery. Furthermore, we investigated the application of a lipid-POx conjugate for the formulation and delivery of mRNA-loaded lipid nanoparticles for immunization against the SARS-COV-2 virus, underscoring the value of POx as a biocompatible polymer platform.

Molecular dynamics simulation to reveal the transport mechanism of LiPF6 in ethylene carbonate + dimethylcarbonate binary solvent.

This paper presents the molecular dynamics simulation of 1 mol kg-1 LiPF6 in a binary solvent of ethylene carbonate (EC) and dimethylcarbonate, which is a representative electrolyte solution for lithium-ion batteries. The simulation successfully reproduced the diffusion coefficient, ionic conductivity, and shear viscosity as functions of EC content at 300 K, which had been experimentally determined in our previous study. The Yukawa potential was adopted to model intercharge interactions to reduce computational costs, which consequently allowed us to precisely calculate the conductivity and viscosity by directly integrating time-correlation functions without explicitly modeling the molecular polarization. Breaking down microscopic current correlation functions into components revealed that, whereas the cation-anion attractive interaction dominantly impedes the conduction when the EC content is low, it is the cation-cation and anion-anion repulsive interactions that reduce the conductivity at a high EC content. An analysis of the pressure correlations revealed that all components positively contribute to the viscosity in the binary solvent without the electrolyte. On the other hand, negative terms are observed in five out of six cross correlations in the presence of the electrolyte, implying that these correlations negatively contribute to the shear stress and entropy production, both of which are net positive.

An Amphipathic Structure of a Dipropylglycine-Containing Helical Peptide with Sufficient Length Enables Safe and Effective Intracellular siRNA Delivery.

Amphipathic peptides composed of cationic amino acids and hydrophobic amino acids have cell-penetrating ability and are often used as a delivery tool for membrane-impermeable compounds. Small interfering RNA (siRNAs) are one of the delivery targets for such cell-penetrating peptides (CPPs). Cationic CPPs can associate with anionic siRNAs by electrostatic interactions resulting in the formation of nano-sized complexes, which can deliver siRNAs intracellularly. CPPs containing unnatural amino acids offer promising tools to siRNA delivery. However, the detailed structure-activity relationship in siRNA delivery has been rarely studied. In the current study, we designed peptides containing dipropylglycine (Dpg) and explored the cellular uptake and cytotoxicity of peptide/siRNA complexes. The amphipathic structure of the peptides played a key role in complexation with siRNAs and intracellular siRNA delivery. In the amphipathic peptides, cellular uptake of siRNA increased with increasing peptide length, but cytotoxicity was reduced. A peptide containing four Dpg exhibited an effective gene-silencing effect with small amounts of peptides without cytotoxicity in medium containing serum. These findings will be helpful for the design of novel CPPs for siRNA delivery.

Block catiomers with flanking hydrolyzable tyrosinate groups enhance in vivo mRNA delivery via π-π stacking-assisted micellar assembly.

Messenger RNA (mRNA) therapeutics have recently demonstrated high clinical potential with the accelerated approval of SARS-CoV-2 vaccines. To fulfill the promise of unprecedented mRNA-based treatments, the development of safe and efficient carriers is still necessary to achieve effective delivery of mRNA. Herein, we prepared mRNA-loaded nanocarriers for enhanced in vivo delivery using biocompatible block copolymers having functional amino acid moieties for tunable interaction with mRNA. The block copolymers were based on flexible poly(ethylene glycol)-poly(glycerol) (PEG-PG) modified with glycine (Gly), leucine (Leu) or tyrosine (Tyr) via ester bonds to generate block catiomers. Moreover, the amino acids can be gradually detached from the block copolymers after ester bond hydrolyzation, avoiding cytotoxic effects. When mixed with mRNA, the block catiomers formed narrowly distributed polymeric micelles with high stability and enhanced delivery efficiency. Particularly, the micelles based on tyrosine-modified PEG-PG (PEG-PGTyr), which formed a polyion complex (PIC) and π-π stacking with mRNA, displayed excellent stability against polyanions and promoted mRNA integrity in serum. PEG-PGTyr-based micelles also increased the cellular uptake and the endosomal escape, promoting high protein expression both in vitro and in vivo. Furthermore, the PEG-PGTyr-based micelles significantly extended the half-life of the loaded mRNA after intravenous injection. Our results highlight the potential of PEG-PGTyr-based micelles as safe and effective carriers for mRNA, expediting the rational design of polymeric materials for enhanced mRNA delivery.

Effective mRNA Protection by Poly(l-ornithine) Synergizes with Endosomal Escape Functionality of a Charge-Conversion Polymer toward Maximizing mRNA Introduction Efficiency.

For efficient delivery of messenger (m)RNA, delivery carriers need two major functions: protecting mRNA from nucleases and translocating mRNA from endolysosomes to the cytoplasm. Herein, these two complementary functionalities are integrated into a single polyplex by fine-tuning the catiomer chemical structure and incorporating the endosomal escape modality. The effect of the methylene spacer length on the catiomer side chain is evaluated by comparing poly(l-lysine) (PLL) with a tetramethylene spacer and poly(L-ornithine) (PLO) with a trimethylene spacer. Noteworthily, the nuclease stability of the mRNA/catiomer polyplexes is largely affected by the difference in one methylene group, with PLO/mRNA polyplex showing enhanced stability compared to PLL/mRNA polyplex. To introduce the endosomal escape function, the PLO/mRNA polyplex is wrapped with a charge-conversion polymer (CCP), which is negatively charged at extracellular pH but turns positive at endosomal acidic pH to disrupt the endosomal membrane. Compared to the parent PLO/mRNA polyplex, CCP facilitated the endosomal escape of the polyplex in cultured cells to improve the protein expression efficiency from mRNA by approximately 80-fold. Collectively, this system synergizes the protective effect of PLO against nucleases and the endosomal escape capability of CCP in mRNA delivery.

Acute normovolemic hemodilution reduced the frequency and amount of perioperative allogeneic blood transfusion in pediatric and adolescent scoliosis surgery: a retrospective observational study.

PURPOSE: The aim of the present study is to investigate whether acute normovolemic hemodilution (ANH) can reduce the frequency and amount of perioperative allogeneic blood transfusion (ABT) (intraoperative ABT and postoperative ABT until discharge from the hospital) in pediatric and adolescent scoliosis surgery. METHODS: This single-center, retrospective, observational study included the perioperative data of 147 patients who were 18 years old or younger and underwent scoliosis surgery. Patients were divided into groups according to whether they received ANH: i.e., an ANH group and control group. Propensity-score-adjusted multivariable logistic regression analysis was performed to determine whether ANH can reduce the frequency of perioperative ABT. RESULTS: A total of 125 patients were analyzed, 95 and 30 in the ANH and control group, respectively. The intraoperative/postoperative ABT frequency was significantly lower in the ANH group than in the control group (17.9% vs. 36.7%, p = 0.044). The amount of ABT [median (IQR): 0 (0, 0) mL/kg vs. 0 (0, 16.3) mL/kg, p = 0.033] was also significantly lower in the ANH group than in the control group. Propensity-score-adjusted multivariable logistic regression analysis indicated that ANH use [odds ratio: 0.15; 95% confidence interval: 0.03, 0.77; p = 0.023)] was associated with a lower risk of ABT after adjusting for intraoperative blood loss and duration of surgery. CONCLUSION: ANH use can reduce the frequency and amount of perioperative ABT in pediatric and adolescent scoliosis surgery.

Living Anionic Addition Reaction of 1,1-Diphenylethylene Derivatives: One-Pot Synthesis of ABC-type Chain-End Sequence-Controlled Polymers.

In this study, a 1:1 addition reaction using 1,1-diphenylethylene (DPE) derivatives, referred to as the "living anionic addition reaction", was established to regulate the sequence of vinyl compounds having negligible homopolymerizability. The stoichiometric and successive addition reaction between a DPE anion and more reactive DPE derivatives proceeded quantitatively when the electrophilicity of the DPE derivatives was sufficiently enhanced by electron-withdrawing groups such as (trimethylsilyl)ethynyl and acyl groups. The relative electrophilicity of the DPE derivatives was predicted by Hammett's law and the ß-carbon chemical shifts of the carbon-carbon double bonds. AB- and ABC-type chain-end sequence-controlled polystyrenes with well-defined structures were synthesized by reacting two or three DPE derivatives with difunctional anionic living polystyrene in increasing order of their electrophilicity in a one-pot reaction.

How does the solvent composition influence the transport properties of electrolyte solutions? LiPF6 and LiFSA in EC and DMC binary solvent.

In this study, we experimentally measured the viscosity, η, and ionic conductivity, σ, of the electrolyte solutions of 1 mol kg-1 of LiPF6 or LiFSA dissolved in the binary mixture solvent of EC and DMC in a temperature range of 288 ≤ T/K ≤ 328 by varying the EC content from 0 to 60 vol%, which translates into the molar fraction of EC of 0 ≤ xEC ≤ 0.7. The diffusion coefficient, D, of each species, Li+, PF6-, FSA-, EC and DMC, was determined by pulse gradient spin-echo NMR. The state of molecules around Li+ was examined using the Raman spectra of the solvents and anions; the quantitative analysis suggests that EC is about twice as much preferred as DMC in the solvation shell at low xEC, while the EC-preference decreases with an increase in xEC. The classical Stokes-Einstein relation still quantitatively holds when evaluating the hydrodynamic radius, rSt, of transporting entities from D and η, in that (i) rSt,EC and rSt,DMC without the solute do not significantly differ from those in the solution; (ii) rSt,Li roughly coincides with the size estimated from the solvation number determined by Raman spectroscopy, which implies that rSt,Li reflects the solvation shell size; and (iii) rSt,anion is close to the static size, suggesting that anions are little solvated. The increase in xEC results in a decrease in rSt for all species, among which anions are most influenced, which is consistent with the view that the highly Li+-solvating EC, with its better dielectric shielding effect than DMC, liberates the anions from Li+, whereby enhancing the anion transfer that positively contributes to the ionic conductivity until the viscosity prevails at high xEC.

Nanomedicine-Based Approaches for mRNA Delivery.

Messenger RNA (mRNA) has immense potential for developing a wide range of therapies, including immunotherapy and protein replacement. As mRNA presents no risk of integration into the host genome and does not require nuclear entry for transfection, which allows protein production even in nondividing cells, mRNA-based approaches can be envisioned as safe and practical therapeutic strategies. Nevertheless, mRNA presents unfavorable characteristics, such as large size, immunogenicity, limited cellular uptake, and sensitivity to enzymatic degradation, which hinder its use as a therapeutic agent. While mRNA stability and immunogenicity have been ameliorated by direct modifications on the mRNA structure, further improvements in mRNA delivery are still needed for promoting its activity in biological settings. In this regard, nanomedicine has shown the ability for spatiotemporally controlling the function of a myriad of bioactive agents in vivo. Direct engineering of nanomedicine structures for loading, protecting, and releasing mRNA and navigating in biological environments can then be applied for promoting mRNA translation toward the development of effective treatments. Here, we review recent approaches aimed at enhancing mRNA function and its delivery through nanomedicines, with particular emphasis on their applications and eventual clinical translation.

Tunable nonenzymatic degradability of N-substituted polyaspartamide main chain by amine protonation and alkyl spacer length in side chains for enhanced messenger RNA transfection efficiency.

Degradability of polycations under physiological conditions is an attractive feature for their use in biomedical applications, such as the delivery of nucleic acids. This study aims to design polycations with tunable nonenzymatic degradability. A series of cationic N-substituted polyaspartamides were prepared to possess primary amine via various lengths of alkyl spacers in side chains. The degradation rate of each polyaspartamide derivative was determined by size exclusion chromatography under different pH conditions. The N-substituted polyaspartamide containing a 2-aminoethyl moiety in the side chain (PAsp(AE)) showed considerable degradability under physiological conditions (pH 7.4, 37 °C). In contrast, the N-substituted polyaspartamides bearing a longer alkyl spacer in the side chain, i.e. the 3-aminopropyl (PAsp(AP)) and 4-aminobutyl moieties (PAsp(AB)), more strongly suppressed degradation. Further, a positive correlation was observed between the degradation rate of N-substituted polyaspartamides and a deprotonation degree of primary amines in their side chains. Therefore, we conclude that the deprotonated primary amine in the side chain of N-substituted polyaspartamides can induce the degradation of the main chain through the activation of amide nitrogen in the side chain. When N-substituted polyaspartamides were utilized as a messenger RNA (mRNA) delivery vehicle via formation of polyion complexes (PICs), degradable PAsp(AE) elicited significantly higher mRNA expression efficiency in cultured cells compared to PAsp(AP) and PAsp(AB). The higher efficiency of PAsp(AE) might be due to the facilitated destabilization of PICs within the cells, directed toward mRNA release. Additionally, degradation of PAsp(AE) considerably reduced its cytotoxicity. Thus, our study highlights a useful design of well-defined cationic poly(amino acid)s with tunable nonenzymatic degradability.

PEG-OligoRNA Hybridization of mRNA for Developing Sterically Stable Lipid Nanoparticles toward In Vivo Administration.

Lipid nanoparticles (LNPs) exhibit high potential as carriers of messenger RNA (mRNA). However, the arduous preparation process of mRNA-loaded LNPs remains a huge obstacle for their widespread clinical application. Herein, we tackled this issue by mRNA PEGylation through hybridization with polyethylene glycol (PEG)-conjugated RNA oligonucleotides (PEG-OligoRNAs). Importantly, mRNA translational activity was preserved even after hybridization of 20 PEG-OligoRNAs per mRNA. The straightforward mixing of the PEGylated mRNA with lipofectamine LTX, a commercial lipid-based carrier, just by pipetting in aqueous solution, allowed the successful preparation of mRNA-loaded LNPs with a diameter below 100 nm, whereas the use of non-PEGylated mRNA provided large aggregates above 100- and 1000-nm. In vivo, LNPs prepared from PEG-OligoRNA-hybridized mRNA exhibited high structural stability in biological milieu, without forming detectable aggregates in mouse blood after intravenous injection. In contrast, LNPs from non-PEGylated mRNA formed several micrometer-sized aggregates in blood, leading to rapid clearance from blood circulation and deposition of the aggregates in lung capillaries. Our strategy of mRNA PEGylation was also versatile to prevent aggregation of another type of mRNA-loaded LNP, DOTAP/Chol liposomes. Together, our approach provides a simple and robust preparation method to LNPs for in vivo application.

Bundling mRNA Strands to Prepare Nano-Assemblies with Enhanced Stability Towards RNase for In†Vivo Delivery.

Ribonuclease (RNase)-mediated degradation of messenger RNA (mRNA) poses a huge obstruction to in vivo mRNA delivery. Herein, we propose a novel strategy to protect mRNA by structuring mRNA to prevent RNase attack through steric hinderance. Bundling of mRNA strands through hybridization of RNA oligonucleotide linkers allowed the preparation of mRNA nano-assemblies (R-NAs) comprised of 7.7 mRNA strands on average, mostly below 100 nm in diameter. R-NA formation boosted RNase stability by around 100-fold compared to naïve mRNA and preserved translational activity, allowing protein production. A mechanistic analysis suggests that an endogenous mRNA unwinding mechanism triggered by 5'-cap-dependent translation may induce selective R-NA dissociation intracellularly, leading to smooth translation. R-NAs showed efficient mRNA transfection in mouse brain, demonstrating the feasibility for in vivo administration.

Material challenges for solar cells in the twenty-first century: directions in emerging technologies.

Photovoltaic generation has stepped up within the last decade from outsider status to one of the important contributors of the ongoing energy transition, with about 1.7% of world electricity provided by solar cells. Progress in materials and production processes has played an important part in this development. Yet, there are many challenges before photovoltaics could provide clean, abundant, and cheap energy. Here, we review this research direction, with a focus on the results obtained within a Japan-French cooperation program, NextPV, working on promising solar cell technologies. The cooperation was focused on efficient photovoltaic devices, such as multijunction, ultrathin, intermediate band, and hot-carrier solar cells, and on printable solar cell materials such as colloidal quantum dots.

A Rational Entry to Cyclic Polymers via Selective Cyclization by Self-Assembly and Topology Transformation of Linear Polymers.

A simple and effective synthetic route to cyclic polymers has been developed based on the following sequence: (i) selective cyclization of two self-complementary sec-ammonium-containing crown ether monomers to afford [c2] daisy-chain bifunctional initiators, (ii) living polymerization to afford the corresponding linear polymers, and (iii) a topology transformation of these linear polymers to furnish cyclic polymers. The key step in this sequence is the quantitative cyclization via self-assembly of two crown ether molecules with hydroxyl and sec-ammonium moieties. After the living polymerization, the linear polymers release the daisy-chain assembly to generate a cyclic topology. The specific advantages of the present synthetic protocol, i.e., procedural simplicity and concentration independence, are demonstrated by a gram-scale synthesis.