Separation of Anionic Chlorinated Dyes from Polluted Aqueous Streams Using Ionic Liquids and Their Subsequent Recycling.

The effect of ionic liquids on the separation of chlorinated anionic dyes such as Mordant Blue 9 (MB9) or Acid Yellow 17 (AY17) via ion exchange has been investigated in model aqueous solutions that simulate wastewater from the textile dyeing industry. The effect of ionic liquids chemical nature on the separation efficiency of mentioned dyes has been compared. It was found that especially ionic liquid based on quaternary ammonium salts comprising two or three long alkyl chains bound to the quaternary ammonium nitrogen (typically benzalkonium chloride or Aliquat 336) are very effective for the separation of both studied MB9 and AY17 from aqueous solution. In addition, the innovative technique has been developed for the reactivation of spent ionic liquids which is based on the chemical reduction of the formed ion pairs using NaBH4/NiSO4, NaBH4/Na2S2O5 or Raney Al-Ni alloy/NaOH. Thus, only NaBH4/NiSO4 in co-action with Al-Ni alloy enables both effective reduction of the azo bond and subsequent hydrodechlorination of emerging chlorinated aromatic amines. The efficiency of tested dyes separation or regeneration of ion pairs was evaluated by determination of the absorbance at wavelength of the maximum absorbance, of the Chemical Oxidation Demand (COD), and of the Adsorbables Organically bound Halogens (AOX). The formation of ion pairs or products of reduction and hydrodechlorination of these ion pairs has been studied using the 1H NMR and LC-MS techniques.

Application of Raney Al-Ni Alloy for Simple Hydrodehalogenation of Diclofenac and Other Halogenated Biocidal Contaminants in Alkaline Aqueous Solution under Ambient Conditions.

Raney Al-Ni contains 62% of Ni2Al3 and 38% NiAl3 crystalline phases. Its applicability has been studied within an effective hydrodehalogenation of hardly biodegradable anti-inflammatory drug diclofenac in model aqueous concentrates and, subsequently, even in real hospital wastewater with the aim of transforming them into easily biodegradable products. In model aqueous solution, complete hydrodechlorination of 2 mM aqueous diclofenac solution (0.59 g L-1) yielding the 2-anilinophenylacetate was achieved in less than 50 min at room temperature and ambient pressure using only 9.7 g L-1 of KOH and 1.65 g L-1 of Raney Al-Ni alloy. The dissolving of Al during the hydrodehalogenation process is accompanied by complete consumption of NiAl3 crystalline phase and partial depletion of Ni2Al3. A comparison of the hydrodehalogenation ability of a mixture of diclofenac and other widely used halogenated aromatic or heterocyclic biocides in model aqueous solution using Al-Ni was performed to verify the high hydrodehalogenation activity for each of the used halogenated contaminants. Remarkably, the robustness of Al-Ni-based hydrodehalogenation was demonstrated even for the removal of non-biodegradable diclofenac in real hospital wastewater with high chloride and nitrate content. After removal of the insoluble part of the Al-Ni for subsequent hydrometallurgical recycling, the low quantity of residual Ni was removed together with insoluble Al(OH)3 obtained after neutralization of aqueous filtrate by filtration.