Single-center experience with perioperative antibiotic prophylaxis and surgical site infections in kidney transplant recipients.

BACKGROUND: Infections in kidney transplant recipients are particularly challenging owing to the immunosuppressive treatment, usually long history of chronic illness, comorbidities and prior exposures to antibiotics. Among the most common complications early after surgery are surgical site infections. The aim of this study was to identify risk factors and evaluate epidemiological data regarding surgical site infections. Moreover, we were able to compare the current results with historical data from our institution when different perioperative antibiotic prophylaxis was practiced. METHODS: We conducted a retrospective case-control study in a group of 254 deceased donor renal graft recipients transplanted in a single Central European institution. We evaluated epidemiological findings and resistance patterns of pathogens causing surgical site infections. We used multivariable logistic regression to determine risk factors for surgical site infections. RESULTS: We revealed no differences in baseline characteristics between patients with and without surgical site infections. Ten surgical site infections (3.9%) were diagnosed (six superficial incisional, two deep incisional, and two organ/space). Eight species (19 strains) were identified, most of which were multi-drug resistant (63%). The most common was extended-spectrum ß-lactamase producing Klebsiella pneumoniae (26%). We showed that statistically significant differences were present between reoperated and non-reoperated patients (adjusted odds ratio: 6.963, 95% confidence interval 1.523-31.842, P = .012). CONCLUSIONS: Reoperation is an individual risk factor for surgical site infection after kidney transplantation. According to our experience, cefazolin-based prophylaxis can be safe and is associated with relatively low prevalence of surgical site infections.

Impact of Porcine Pancreas Decellularization Conditions on the Quality of Obtained dECM.

Due to the limited number of organ donors, 3D printing of organs is a promising technique. Tissue engineering is increasingly using xenogeneic material for this purpose. This study was aimed at assessing the safety of decellularized porcine pancreas, together with the analysis of the risk of an undesirable immune response. We tested eight variants of the decellularization process. We determined the following impacts: rinsing agents (PBS/NH3·H2O), temperature conditions (4 °C/24 °C), and the grinding method of native material (ground/cut). To assess the quality of the extracellular matrix after the completed decellularization process, analyses of the following were performed: DNA concentration, fat content, microscopic evaluation, proteolysis, material cytotoxicity, and most importantly, the Triton X-100 content. Our analyses showed that we obtained a product with an extremely low detergent content with negligible residual DNA content. The obtained results confirmed the performed histological and immuno-fluorescence staining. Moreover, the TEM microscopic analysis proved that the correct collagen structure was preserved after the decellularization process. Based on the obtained results, we chose the most favorable variant in terms of quality and biology. The method we chose is an effective and safe method that gives a chance for the development of transplant and regenerative medicine.

Type 1 diabetes: genes associated with disease development.

Type 1 diabetes (T1D) is the third most common autoimmune disease which develops due to genetic and environmental risk factors. Based on the World Health Organization (WHO) report from 2014 the number of people suffering from all types of diabetes ascended to 422 million, compared to 108 million in 1980. It was calculated that this number will double by the end of 2030. In 2015 American Diabetes Association (ADA) announced that 30.3 million Americans (that is 9.4% of the overall population) had diabetes of which only approximately 1.25 million had T1D. Nowadays, T1D represents roughly 10% of adult diabetes cases total. Multiple genetic abnormalities at different loci have been found to contribute to type 1 diabetes development. The analysis of genome-wide association studies (GWAS) of T1D has identified over 50 susceptible regions (and genes within these regions). Many of these regions are defined by single nucleotide polymorphisms (SNPs) but molecular mechanisms through which they increase or lower the risk of diabetes remain unknown. Genetic factors (in existence since birth) can be detected long before the emergence of immunological or clinical markers. Therefore, a comprehensive understanding of the multiple genetic factors underlying T1D is extremely important for further clinical trials and development of personalized medicine for diabetic patients. We present an overview of current studies and information about regions in the human genome associated with T1D. Moreover, we also put forward information about epigenetic modifications, non-coding RNAs and environmental factors involved in T1D development and onset.

Successful transplantation of kidneys from deceased donors with terminal acute kidney injury.

BACKGROUND: There are many doubts with regards to accepting deceased kidneys with acute kidney injury (AKI) for transplantation. PURPOSE: The aim of this study was to present the 5-years outcome of kidney transplantation cases where deceased donors developed AKI before organ procurement. METHODS: Two hundred twenty-six deceased renal transplants were analyzed. Data regarding donors and recipients were collected. Terminal AKI was defined as terminal serum creatinine concentration higher than 1.99 mg/dL and 66 such cases were diagnosed. All kidney transplant recipients were followed for 60 months. RESULTS: AKI group presented more episodes of delayed graft function (DGF) compared to the non-AKI group (56% vs 35%, p < .05). No differences were observed between the groups in the rate of acute rejection episodes, kidney function as well as patient and graft survival. CONCLUSIONS: Transplants with AKI present more often DGF and comparable graft survival to transplants without AKI. Kidneys with AKI can be a valuable source of organs provided attentive selection and appropriate care of deceased donors.

Preservation of kidneys by machine perfusion influences gene expression and may limit ischemia/reperfusion injury.

CONTEXT: Machine perfusion improves graft survival. Histopathologic analysis reveals a lower incidence of chronic rejection and interstitial fibrosis in kidneys preserved with machine perfusion. Ischemic/reperfusion injury may help to explain these findings. OBJECTIVE: To assess the activation of genes correlated with ischemic/reperfusion injury in kidneys preserved under different conditions before transplant. DESIGN/PATIENTS: Between 2005 and 2006, 69 kidney biopsy specimens were collected and patients were followed up for 5 years after that.Intervention-Before transplant, kidneys were preserved with machine perfusion or cold storage. Donors from the machine perfusion and cold storage groups did not differ with regard to age, sex, or hemodynamic status. Recipients were divided into 5 groups: expanded criteria donor-machine perfusion (n = 16), standard criteria donor-machine perfusion (n = 10), expanded criteria donor-cold storage (n = 9), and standard criteria donor-cold storage (n = 27); 7 kidneys were retrieved from living related donors. MAIN OUTCOME MEASURES: Biopsies were done 30 minutes after reperfusion. Interleukin-1ß, vascular endothelial growth factor, heme oxygenase-1, and hypoxia-inducible factor-1 gene expression levels were analyzed. RESULTS: Mean expression levels of hypoxia-inducible factor-1α were significantly higher in the cold storage groups, and lower in the machine perfusion and living-related donor groups. Five-year graft survival was significantly (P< .05) lower in the expanded criteria donor-cold storage group (66%) than in the standard criteria donor-machine perfusion group (90%). Machine perfusion influences gene expression related to hypoxia during reperfusion and may improve the long-term results of kidney transplant.

Bioprinting of Perfusable, Biocompatible Vessel-like Channels with dECM-Based Bioinks and Living Cells.

There is a growing interest in the production of bioinks that on the one hand, are biocompatible and, on the other hand, have mechanical properties that allow for the production of stable constructs that can survive for a long time after transplantation. While the selection of the right material is crucial for bioprinting, there is another equally important issue that is currently being extensively researched-the incorporation of the vascular system into the fabricated scaffolds. Therefore, in the following manuscript, we present the results of research on bioink with unique physico-chemical and biological properties. In this article, two methods of seeding cells were tested using bioink B and seeding after bioprinting the whole model. After 2, 5, 8, or 24 h of incubation, the flow medium was used in the tested systems. At the end of the experimental trial, for each time variant, the canals were stored in formaldehyde, and immunohistochemical staining was performed to examine the presence of cells on the canal walls and roof. Cells adhered to both ways of fiber arrangement; however, a parallel bioprint with the 5 h incubation and the intermediate plating of cells resulted in better adhesion efficiency. For this test variant, the percentage of cells that adhered was at least 20% higher than in the other analyzed variants. In addition, it was for this variant that the lowest percentage of viable cells was found that were washed out of the tested model. Importantly, hematoxylin and eosin staining showed that after 8 days of culture, the cells were evenly distributed throughout the canal roof. Our study clearly shows that neovascularization-promoting cells effectively adhere to ECM-based pancreatic bioink. Summarizing the presented results, it was demonstrated that the proposed bioink compositions can be used for bioprinting bionic organs with a vascular system formed by endothelial cells and fibroblasts.

Elasticity Modification of Biomaterials Used in 3D Printing with an Elastin-Silk-like Recombinant Protein.

The recombinant structural protein described in this study was designed based on sequences derived from elastin and silk. Silk-elastin hybrid copolymers are characterized by high solubility while maintaining high product flexibility. The phase transition temperature from aqueous solution to hydrogel, as well as other physicochemical and mechanical properties of such particles, can differ significantly depending on the number of sequence repeats. We present a preliminary characterization of the EJ17zipR protein obtained in high yield in a prokaryotic expression system and efficiently purified via a multistep process. Its addition significantly improves biomaterial's rheological and mechanical properties, especially elasticity. As a result, EJ17zipR appears to be a promising component for bioinks designed to print spatially complex structures that positively influence both shape retention and the internal transport of body fluids. The results of biological studies indicate that the addition of the studied protein creates a favorable microenvironment for cell adhesion, growth, and migration.

Characterization of a Chimeric Resilin-Elastin Structural Protein Dedicated to 3D Bioprinting as a Bioink Component.

In this study we propose to use for bioprinting a bioink enriched with a recombinant RE15mR protein with a molecular weight of 26 kDa, containing functional sequences derived from resilin and elastin. The resulting protein also contains RGD sequences in its structure, as well as a metalloproteinase cleavage site, allowing positive interaction with the cells seeded on the construct and remodeling the structure of this protein in situ. The described protein is produced in a prokaryotic expression system using an E. coli bacterial strain and purified by a process using a unique combination of known methods not previously used for recombinant elastin-like proteins. The positive effect of RE15mR on the mechanical, physico-chemical, and biological properties of the print is shown in the attached results. The addition of RE15mR to the bioink resulted in improved mechanical and physicochemical properties and promoted the habitation of the prints by cells of the L-929 line.

Graphene Oxide (GO)-Based Bioink with Enhanced 3D Printability and Mechanical Properties for Tissue Engineering Applications.

Currently, a major challenge in material engineering is to develop a cell-safe biomaterial with significant utility in processing technology such as 3D bioprinting. The main goal of this work was to optimize the composition of a new graphene oxide (GO)-based bioink containing additional extracellular matrix (ECM) with unique properties that may find application in 3D bioprinting of biomimetic scaffolds. The experimental work evaluated functional properties such as viscosity and complex modulus, printability, mechanical strength, elasticity, degradation and absorbability, as well as biological properties such as cytotoxicity and cell response after exposure to a biomaterial. The findings demonstrated that the inclusion of GO had no substantial impact on the rheological properties and printability, but it did enhance the mechanical properties. This enhancement is crucial for the advancement of 3D scaffolds that are resilient to deformation and promote their utilization in tissue engineering investigations. Furthermore, GO-based hydrogels exhibited much greater swelling, absorbability and degradation compared to non-GO-based bioink. Additionally, these biomaterials showed lower cytotoxicity. Due to its properties, it is recommended to use bioink containing GO for bioprinting functional tissue models with the vascular system, e.g., for testing drugs or hard tissue models.

One-year results of a prospective, randomized trial comparing two machine perfusion devices used for kidney preservation.

Studies have shown beneficial effects of machine perfusion (MP) on early kidney function and long-term graft survival. The aim of this study was to investigate whether the type of perfusion device could affect outcome of transplantation of deceased donor kidneys. A total of 50 kidneys retrieved from 25 donors were randomized to machine perfusion using a flow-driven (FD) device (RM3; Waters Medical Inc) or a pressure-driven (PD) device (LifePort; Organ Recovery Systems), 24 of these kidneys (n = 12 pairs; 48%) were procured from expanded criteria donors (ECD). The primary endpoints were kidney function after transplantation defined using the incidence of delayed graft function (DGF), the number of hemodialysis sessions required, graft function at 12 months, and analyses of biopsy. DGF was similar in both groups (32%; 8/25). Patients with DGF in the FD group required a mean of 4.66 hemodialysis sessions versus 2.65 in the PD group (P = 0.005). Overall, 1-year graft survival was 80% (20/25) vs. 96% (24/25) in the FD and PD groups. One-year graft survival of ECD kidneys was 66% (8/12) in the FD group versus 92% (11/12) in the PD group. Interstitial fibrosis and tubular atrophy were significantly more common in the FD group - 45% (5/11) vs. 0% (0/9) (P = 0.03) in PD group. There were no differences in creatinine levels between the groups. Machine perfusion using a pressure-driven device generating lower pulse stress is superior to a flow-driven device with higher pulse stress for preserving kidney function.

[Islet transplantation as a treatment for complications of type I diabetes]. / Przeszczepienie wysp trzustkowych jako metoda leczenia powiklan cukrzycy typu I.

Reduced physical activity and high calories up-take along with carbohydrates based diet are considered to be a leading cause of diabetes mellitus rise in western countries. Together with rise in DM morbidity, increase of complicated diabetes is also observed. Pancreas transplantation occurred to be a milestone in diabetic patient management. Guine pig pancreatic islets isolation performed for the first time by Moskalewski in 1965 and updates of his method have given an opportunity to introduce allogenic isolated islets transplantation to clinical usage. For the first time in Poland clinical allotransplantation of isolated pancreatic islets took place in Department of General Surgery and Transplantology of Medical University of Warsaw in 12's June 2008. Unfortunately, unsatisfying results of islet transplantation, specially short period of insulin independence after successful transplantation related with multifactor islet function lost, reduce clinical indications. In this publication we have analyzed known and potential factors of islet lost and we have tried to find way to prevent them, with a long period insulin-independence after transplantation as a main goal.

Bioprinted 3D Bionic Scaffolds with Pancreatic Islets as a New Therapy for Type 1 Diabetes-Analysis of the Results of Preclinical Studies on a Mouse Model.

Recently, tissue engineering, including 3D bioprinting of the pancreas, has acquired clinical significance and has become an outstanding potential method of customized treatment for type 1 diabetes mellitus. The study aimed to evaluate the function of 3D-bioprinted pancreatic petals with pancreatic islets in the murine model. A total of 60 NOD-SCID (Nonobese diabetic/severe combined immunodeficiency) mice were used in the study and divided into three groups: control group; IsletTx (porcine islets transplanted under the renal capsule); and 3D bioprint (3D-bioprinted pancreatic petals with islets transplanted under the skin, on dorsal muscles). Glucose, C-peptide concentrations, and histological analyses were performed. In the obtained results, significantly lower mean fasting glucose levels (mg/dL) were observed both in a 3D-bioprint group and in a group with islets transplanted under the renal capsule when compared with untreated animals. Differences were observed in all control points: 7th, 14th, and 28th days post-transplantation (129, 119, 118 vs. 140, 139, 140; p < 0.001). Glucose levels were lower on the 14th and 28th days in a group with bioprinted petals compared to the group with islets transplanted under the renal capsule. Immunohistochemical staining indicated the presence of secreted insulin-living pancreatic islets and neovascularization within 3D-bioprinted pancreatic petals after transplantation. In conclusion, bioprinted bionic petals significantly lowered plasma glucose concentration in studied model species.

Successful outcome of transplant of kidneys recovered from a brain-dead liver transplant recipient: case report.

Few reports describing the use of organs donated by transplant recipients have been published. In this case report, kidneys procured from a brain-dead liver recipient were transplanted successfully. A 21-year-old man was referred for liver transplant after an overdose of acetaminophen. The patient's kidney function was initially normal, with proper urine production and normal kidney laboratory parameters. On the third day after admission, the patient's kidney laboratory parameters became elevated and hepatic encephalopathy requiring mechanical ventilation developed. An orthotopic liver transplant was performed the next day. The patient did not recover consciousness, and brain death was diagnosed on the third day after the liver transplant surgery. The maximum serum concentration of creatinine was 5.8 mg/dL (513 µmol/L) before kidney recovery, and urine production was normal. The kidneys were recovered with organ-perfusion support and were preserved by using machine perfusion. The kidneys were transplanted into 2 male recipients. Twelve months after transplant, the recipients remained in good health with satisfactory kidney function. This case demonstrates that transplanting kidneys recovered from liver transplant recipients is possible and beneficial, thus expanding the pool of potential donors.

Chitosan as an Underrated Polymer in Modern Tissue Engineering.

Chitosan is one of the most well-known and characterized materials applied in tissue engineering. Due to its unique chemical, biological and physical properties chitosan is frequently used as the main component in a variety of biomaterials such as membranes, scaffolds, drug carriers, hydrogels and, lastly, as a component of bio-ink dedicated to medical applications. Chitosan's chemical structure and presence of active chemical groups allow for modification for tailoring material to meet specific requirements according to intended use such as adequate endurance, mechanical properties or biodegradability time. Chitosan can be blended with natural (gelatin, hyaluronic acid, collagen, silk, alginate, agarose, starch, cellulose, carbon nanotubes, natural rubber latex, κ-carrageenan) and synthetic (PVA, PEO, PVP, PNIPPAm PCL, PLA, PLLA, PAA) polymers as well as with other promising materials such as aloe vera, silica, MMt and many more. Chitosan has several derivates: carboxymethylated, acylated, quaternary ammonium, thiolated, and grafted chitosan. Its versatility and comprehensiveness are confirming by further chitosan utilization as a leading constituent of innovative bio-inks applied for tissue engineering. This review examines all the aspects described above, as well as is focusing on a novel application of chitosan and its modifications, including the 3D bioprinting technique which shows great potential among other techniques applied to biomaterials fabrication.

Stem Cells as a Source of Pancreatic Cells for Production of 3D Bioprinted Bionic Pancreas in the Treatment of Type 1 Diabetes.

Type 1 diabetes (T1D) is the third most common autoimmune disease which develops due to genetic and environmental risk factors. Often, intensive insulin therapy is insufficient, and patients require a pancreas or pancreatic islets transplant. However, both solutions are associated with many possible complications, including graft rejection. The best approach seems to be a donor-independent T1D treatment strategy based on human stem cells cultured in vitro and differentiated into insulin and glucagon-producing cells (ß and α cells, respectively). Both types of cells can then be incorporated into the bio-ink used for 3D printing of the bionic pancreas, which can be transplanted into T1D patients to restore glucose homeostasis. The aim of this review is to summarize current knowledge about stem cells sources and their transformation into key pancreatic cells. Last, but not least, we comment on possible solutions of post-transplant immune response triggered stem cell-derived pancreatic cells and their potential control mechanisms.

Streptozotocin-Induced Diabetes in a Mouse Model (BALB/c) Is Not an Effective Model for Research on Transplantation Procedures in the Treatment of Type 1 Diabetes.

Type 1 diabetes (T1D) is characterized by the destruction of over 90% of the ß-cells. C-peptide is a parameter for evaluating T1D. Streptozotocin (STZ) is a standard method of inducing diabetes in animals. Eight protocols describe the administration of STZ in mice; C-peptide levels are not taken into account. The aim of the study is to determine whether the STZ protocol for the induction of beta-cell mass destruction allows for the development of a stable in vivo mouse model for research into new transplant procedures in the treatment of type 1 diabetes. Materials and methods: Forty BALB/c mice were used. The animals were divided into nine groups according to the STZ dose and a control group. The STZ doses were between 140 and 400 mg/kg of body weight. C-peptide was taken before and 2, 7, 9, 12, 14, and 21 days after STZ. Immunohistochemistry was performed. The area of the islet and insulin-/glucagon-expressing tissues was calculated. Results: Mice who received 140, 160, 2 × 100, 200, and 250 mg of STZ did not show changes in mean fasting C-peptide in comparison to the control group and to day 0. All animals with doses of 300 and 400 mg of STZ died during the experiment. The area of the islets did not show any differences between the control and STZ-treated mice in groups below 300 mg. The reduction of insulin-positive areas in STZ mice did not exceed 50%. Conclusions: Streptozotocin is not an appropriate method of inducing a diabetes model for further research on transplantation treatments of type 1 diabetes, having caused the destruction of more than 90% of the ß-cell mass in BALB/c mice.

Bionic Organs: Shear Forces Reduce Pancreatic Islet and Mammalian Cell Viability during the Process of 3D Bioprinting.

BACKGROUND: 3D bioprinting is the future of constructing functional organs. Creating a bioactive scaffold with pancreatic islets presents many challenges. The aim of this paper is to assess how the 3D bioprinting process affects islet viability. METHODS: The BioX 3D printer (Cellink), 600 µm inner diameter nozzles, and 3% (w/v) alginate cell carrier solution were used with rat, porcine, and human pancreatic islets. Islets were divided into a control group (culture medium) and 6 experimental groups (each subjected to specific pressure between 15 and 100 kPa). FDA/PI staining was performed to assess the viability of islets. Analogous studies were carried out on α-cells, ß-cells, fibroblasts, and endothelial cells. RESULTS: Viability of human pancreatic islets was as follows: 92% for alginate-based control and 94%, 90%, 74%, 48%, 61%, and 59% for 15, 25, 30, 50, 75, and 100 kPa, respectively. Statistically significant differences were observed between control and 50, 75, and 100 kPa, respectively. Similar observations were made for porcine and rat islets. CONCLUSIONS: Optimal pressure during 3D bioprinting with pancreatic islets by the extrusion method should be lower than 30 kPa while using 3% (w/v) alginate as a carrier.

[Current trends in the treatment of incisional hernia in patients after kidney transplantation]. / Aktualne trendy w leczeniu przepukliny pooperacyjnej po przeszczepieniu nerki.

The incidence of incisional hernia following abdominal surgery varies between 2 and 13%, the rate of incisional hernia after renal transplantation varies between 1.1 and 3.8%. There are no evidence based guidelines regarding the treatment of incisional hernias in renal transplant recipients. The aim of this study was to compare results of surgical repair of incisional hernia in patients after renal transplantation depending on the treatment method. A Pubmed was searched for articles related to the treatment of patients with incisional hernia after renal transplantation. Finally five articles were used for review. The analyzed papers report a total of 5606 patients in a time period between 1965-2004. Hernia mesh repairs were similar - primary approximation of the fascial borders and polypropylene mesh reinforcement, mainly by on lay technique or by suturing the mesh to fascial edges. Hernia repairs without mesh were diverse: simple closure, component separation technique, tensor fascia late grafts, split thickness skin grafting. Although all authors are concerned about prosthetic mesh use for hernia repair in transplant patients, four of them advise this method. Surprisingly, the incidence of incisional hernia in transplant recipients (1.83%) is no higher than in normal population (2-13%). Hernia recurrence in the analyzed group was 2% for prosthetic mesh repair, and 25% for no mesh repair. Prosthetic mesh repair of incisional hernias after kidney transplantation is a safe technique and starting to displace other methods of treatment.

Crosstalk Between Immunity System Cells and Pancreas. Transformation of Stem Cells Used in the 3D Bioprinting Process as a Personalized Treatment Method for Type 1 Diabetes.

Interactions between the immune system and the pancreas are pivotal in understanding how and why ß cells' damage causes problems with pancreas functioning. Pancreatic islets are crucial in maintaining glucose homeostasis in organs, tissue and cells. Autoimmune aggression towards pancreatic islets, mainly ß cells, leads to type 1 diabetes-one of the most prevalent autoimmune disease in the world, being a worldwide risk to health of many people. In this review, we highlight the role of immune cells and its influence in the development of autoimmunity in Langerhans islets. Moreover, we discuss the impact of the immunological factors on future understanding possible recurrence of autoimmunity on 3D-bioprinted bionic pancreas.

Novel Strategies in Artificial Organ Development: What Is the Future of Medicine?

The technology of tissue engineering is a rapidly evolving interdisciplinary field of science that elevates cell-based research from 2D cultures through organoids to whole bionic organs. 3D bioprinting and organ-on-a-chip approaches through generation of three-dimensional cultures at different scales, applied separately or combined, are widely used in basic studies, drug screening and regenerative medicine. They enable analyses of tissue-like conditions that yield much more reliable results than monolayer cell cultures. Annually, millions of animals worldwide are used for preclinical research. Therefore, the rapid assessment of drug efficacy and toxicity in the early stages of preclinical testing can significantly reduce the number of animals, bringing great ethical and financial benefits. In this review, we describe 3D bioprinting techniques and first examples of printed bionic organs. We also present the possibilities of microfluidic systems, based on the latest reports. We demonstrate the pros and cons of both technologies and indicate their use in the future of medicine.