One-Year Treatment Outcome of Profile Changes After Transcutaneous Maxillary Distraction Osteogenesis in Growing Children With Cleft Lip and Palate.

OBJECTIVE: To evaluate the long-term stability of LeFort I osteotomy followed by distraction osteogenesis with a transcutaneous rigid external device for the treatment of severe maxillary hypoplasia in patients with cleft lip and palate. PATIENTS AND METHODS: Nine patients with cleft lip and palate underwent rigid external distraction after a LeFort I osteotomy for maxillary advancement. Lateral cephalometric films were analyzed for assessment of treatment outcome and stability in 1 month, 6 months, and 1 year after distraction. RESULTS: Significant maxillary advancement was observed in the horizontal direction, with the anterior nasal spine (ANS) distance of the maxilla increasing by an average of 20.5 ± 5.1 mm after distraction. The ANS relapse rates in 6 months and 1 year were 8.7% and 12.8%, respectively. The mean inclination of upper incisors to the palatal plane was almost unchanged (before: 109.8° ± 6.6°; after: 108.9° ± 7.5°). The movement ratios at the nasal tip/ANS, soft tissue A point/A point, and the upper vermilion border/upper incisor edge were 0.36:1, 0.72:1, and 0.83:1, respectively. CONCLUSION: Considerable maxillary advancement was achieved with less change of incisors inclination after distraction. Moreover, the relapse rate after 1 year was minimal. The concave facial profile was improved as well as the facial balance and aesthetics.

Roles of autophagy in orthodontic tooth movement.

INTRODUCTION: Orthodontic tooth movement (OTM) relies on efficient remodeling of alveolar bone. While a well-controlled inflammatory response is essential during OTM, the mechanism regulating inflammation is unknown. Autophagy, a conserved catabolic pathway, has been shown to protect cells from excess inflammation in disease states. We hypothesize that autophagy plays a role in regulating inflammation during OTM. METHODS: A split-mouth design was used to force load molars in adult male mice, carrying a GFP-LC3 transgene for in vivo detection of autophagy. Confocal microscopy, Western blot, and quantitative polymerase chain reaction analyses were used to evaluate autophagy activation in tissues of loaded and control molars at time points after force application. Rapamycin, a Food and Drug Administration-approved immunosuppressant, was injected to evaluate induction of autophagy. RESULTS: Autophagy activity increases shortly after loading, primarily on the compression side of the tooth, and is closely associated with inflammatory cytokine expression and osteoclast recruitment. Daily administration of rapamycin, an autophagy activator, led to reduced tooth movement and osteoclast recruitment, suggesting that autophagy downregulates the inflammatory response and bone turnover during OTM. CONCLUSIONS: This is the first demonstration that shows that autophagy is induced by orthodontic loading and plays a role during OTM, likely via negative regulation of inflammatory response and bone turnover. Exploring roles of autophagy in OTM holds great promise, as aberrant autophagy is associated with periodontal disease and its related systemic inflammatory disorders.

Accuracy assessment of computer-aided three-dimensional simulation and navigation in orthognathic surgery (CASNOS).

PURPOSE: This study is aimed for measuring the accuracy of simulation and prediction of our CASNOS protocol in adult patients treated with 2-jaw orthognathic surgery. METHODS: Adult patients with skeletal Class III malocclusions requiring 2-jaw orthognathic surgery were enrolled in the study. Three-dimensional imaging data of 1-month pre-surgical (T1) and 6-month post-surgical (T2) CT were compared to assess accuracy of CASNOS planning. The accuracy of CASNOS protocol was evaluated by calculating the differences in the positions of selected landmarks between simulated surgical and post-surgical 3D images parameters, including ANB, A-Nv, Pog-Nv, and the positions of selected landmarks (ANS, Point A, Point B, Pog) changes in horizontal (x-axis) and vertical (y-axis) directions. Overall geographical discrepancy of planning was assessed by superimposing the color mapping of T1 and T2 imaging. RESULTS: Thirty adult patients with a mean age of 20.6 ± 1.5 years (female/male = 18/12) were enrolled. The geographical changes of overall superimposition between the planned and post-surgical imaging was 0.60 ± 0.19 mm (range: 0.42-1.08 mm). The discrepancies between simulated and post-surgical ANB, A-Nv, Pog-Nv were 1.16 ± 0.36°, 1.25 ± 0.33 mm, 1.19 ± 0.35 mm, respectively. The deviations between simulated and post-surgical Point A and Point B positions were within 1 mm in horizontal and vertical directions. CONCLUSION: The application of the pre-designed bony guiding splints of CASNOS protocol can allow surgeons to treat patients with craniofacial deformities precisely. CASNOS provides a novel approach for orthodontists and surgeons accurately remedying the patients with complex craniofacial discrepancies.

Effect of pore size in bone regeneration using polydopamine-laced hydroxyapatite collagen calcium silicate scaffolds fabricated by 3D mould printing technology.

OBJECTIVE: The pore size of the scaffold is a critical factor in repairing large bone defect. Here, we investigated the potential of bone regeneration using novel nanocomposite polydopamine-laced hydroxyapatite collagen calcium silicate (HCCS-PDA) scaffolds with two different pore sizes, 250 and 500 µm. SAMPLES/SETTING: A total of 12 male Sprague-Dawley rats were implanted with HCCS-PDA scaffold with pore size of either 250 or 500 µm into surgically created critical-sized defect (CSD). METHODS: HCCS-PDA scaffolds were fabricated using mould printing technique. The effect of pore size on mechanical strength of the scaffolds was assessed by compression testing. After seeding with rat mesenchymal stem cells (rMSCs), the scaffolds were implanted, and new bone formation was evaluated using microCT and histomorphometric analysis after 8 weeks. RESULTS: MicroCT and histology analysis demonstrated restricted peripheral new bone formation in either dural or periosteal side and limited new bone formation in the 250 µm pore scaffold. Conversely, the 500-µm pore scaffold showed more penetration of new bone into the scaffold and greater bone regeneration in the rat CSD. CONCLUSION: Based on our results, which demonstrated improved new bone formation in 500 µm pores scaffold, we can conclude that effective scaffold pore size that induces osteointegration and bone regeneration is around 500 µm for HCCS-PDA nanocomposite scaffold.

Analysis of the relationship between the morphology of the palate and facial skeletal patterns in Class III malocclusion using structural equation modelling.

INTRODUCTION: The present study investigated the relationship between facial skeletal patterns and morphology of the palate in adult patients with Class III malocclusion using structural equation modelling (SEM). SETTING AND SAMPLE POPULATION: One hundred cone beam computed tomography images of Class III adults were evaluated for skeletal measurements. MATERIALS AND METHODS: The skeletal measurements were classified into the vertical, anteroposterior and transverse group based on factor analysis. 3D scanning model of the maxilla was analysed by Generalized procrustes analysis (GPA) and principal component analysis (PCA). Structural equation modelling was used to analyse relationship among the skeletal and morphometric factors. RESULTS: According to the factor analysis, latent variables were extracted by each skeletal variable. First principal component (PC1) and PC2 of palatal morphology were used to analyse relationship with skeletal variables. As results of the structural equation model, the transverse latent variable had the most influence on PC1, followed by vertical and anteroposterior variables. This result means that as the facial width increases, the palate becomes narrower, deeper and longer. CONCLUSIONS: The relationship between the skeletal pattern with Class III malocclusion and palatal morphology was analysed through SEM. The transverse facial skeletal pattern showed the highest correlation with PC1 of palatal morphology.

Blood loss and operative time associated with orthognathic surgery utilizing a novel navigation system in cleft lip and palate patients.

PURPOSE: This retrospective study evaluated the volume of blood loss and operative time associated with management of nongrowing patients with cleft lip and palate (CLP) using bimaxillary orthognathic surgery (OGS) designed by a three-dimensional (3D) computer-assisted simulation and navigation for orthognathic surgery (CASNOS) system. METHODS: This study included 53 skeletal Class III nongrowing patients with unilateral CLP who underwent bimaxillary OGS using either the CASNOS protocol (n = 30) or the traditional two-dimensional (2D) method (n = 23). The skeletal parameters of jaw-bone components, the levels of hemoglobin (Hb) and hematocrit (Hct) were measured before and after surgery. The estimated blood loss and actual blood loss (ABL) were also calculated. RESULTS: The two groups did not differ significantly with regard to the demographic parameters (age, gender, and body mass index), the preoperative skeletal parameters and surgical changes of jaw-bone components. The mean ABL of the CASNOS group was significantly lower than that of the control group (915.6 ± 280.5 vs. 1204.9 ± 201.0 ml, p < 0.001), and the changes in Hb and Hct level also followed a similar pattern in both groups. The mean operative time was significantly shorter in the CASNOS group compared with the control group (384.2 ± 48.5 vs. 469.0 ± 94.9 min, p < 0.001). CONCLUSION: This study demonstrated that the application of the 3D CASNOS approach in OGS for the management of complicated Class III nongrowing patients with CLP significantly shortened the operative time and reduced ABL in comparison with the traditional 2D methods.

Efficacy of machine learning assisted dental age assessment in local population.

INTRODUCTION: Although the dental age assessment is commonly applied in forensic and maturity evaluation, the long-standing dilemma from population differences has limited its application. OBJECTIVES: This study aimed to verify the efficacy of the machine learning (ML) to build up the dental age standard of a local population. METHODS: We retrospectively studied 2052 panoramic films retrieved from healthy Taiwanese children aged 2.6-17.7 years with comparable sizes in each age-group. The recently reported Han population-based standard (H method) served as the control condition. To develop and validate ML models, random divisions of the sample in an 80%-20% ratio repeated 20 times. The model performances were compared with the H method, Demirjian's method, and Willems's method. RESULTS: The ML-assisted models provided more accurate age prediction than those non-ML-assisted methods. The range of errors was effectively reduced to less than one per year in the ML models. Furthermore, the consistent agreements among the age groups from preschool to adolescence were reported for the first time. The Gaussian process regression was the best ML model; of the non-ML modalities, the H method was the most efficacious, followed by the Demirjian's method and Willems's methods. CONCLUSION: The ML-assisted dental age assessment is helpful to provide customized standards to a local population with more accurate estimations in preschool and adolescent age groups than do studied conventional methods. In addition, the earlier complete tooth developments were also observed in present study. To construct more reliable dental maturity models in the future, additional environment-related factors should be taken into account.

A Comparative Study of Skeletal and Dental Outcome between Transcutaneous External Maxillary Distraction Osteogenesis and Conventional Rigid External Device in Treating Cleft Lip and Palate Patients.

BACKGROUND: Traditional distraction osteogenesis (DO) with the tooth-borne rigid external device (RED) system was regularly used in treating patients with cleft-related maxillary hypoplasia. However, the bone-borne RED system with miniplates and bone screws has currently become an effective treatment. This retrospective study was to compare bone-borne RED with traditional tooth-borne RED in distraction effectiveness, blood loss, operative time, and long-term stability. METHODS: Twenty-two growing patients who underwent RED therapy were divided into two groups: eleven patients utilizing the bone-borne RED system with the transcutaneous wire attached with skeletal anchorage; another eleven patients using the traditional tooth-borne RED system with the intra-oral device attached with dental anchorage. Serial lateral cephalograms were analyzed for comparing treatment outcomes and stability in 1 month, 6 months, and 1.5 years after distraction. RESULTS: In bone-borne RED group, the maxilla was advanced by 19.98 mm with slight clockwise rotation of 0.40° and minimal palatal inclination change of incisor by -3.94°. In traditional tooth-borne RED group, the maxilla showed less advancement by 14.52 mm, with significant counter-clockwise rotation of -11.23° and excessive palatal inclination change of incisor by -10.86°. Although operative time was longer in the bone-borne RED group by 38.4 min, this did not bring about greater blood loss. CONCLUSIONS: the bone-borne RED via transcutaneous wire system provides an easy, simple, and comfortable procedure as well as favorable long-term stability in maxillary distraction.

The Predictability of the Surgical Outcomes of Class III Patients in the Transverse Dimension-A Study of Three-Dimensional Assessment.

This study aimed to assess the outcomes of planned maxillary surgical movements in the transverse direction in patients possessing a Class III skeletal pattern. The available consecutive patients' records were retrospectively reviewed. Only those possessing a Class III skeletal pattern, and for whom the same virtual planning system was used, were enrolled. The waferless technique was used to guide the jawbone repositioning. A representative triangle in the virtual maxilla of each stage was used to validate the planned surgical movements (PSMs) and the outcome discrepancy (OD). The linear and angular measurements were retrieved for the assessments of the correlation between PSM and OD. In total, 44 adult patients who met the inclusion criteria were studied. The average linear OD of the A-point in the transverse direction was 0.66 ± 0.54 mm, and the yaw correction showed 1.02 ± 0.84 degrees in difference. There was no specific correlation between the linear PSMs and ODs; however, the angular ones were positively correlated. With the help of the waferless technique to transfer the virtual planning results, the practitioners could confidently predict the postsurgical maxillary position in the transverse direction in the orthognathic surgery of Class III patients. However, the yaw correction should be carefully planned to avoid postsurgical instabilities.

The Application of Artificial-Intelligence-Assisted Dental Age Assessment in Children with Growth Delay.

BACKGROUND: This study aimed to reveal the efficacy of the artificial intelligence (AI)-assisted dental age (DA) assessment in identifying the characteristics of growth delay (GD) in children. METHODS: The panoramic films matching the inclusion criteria were collected for the AI model training to establish the population-based DA standard. Subsequently, the DA of the validation dataset of the healthy children and the images of the GD children were assessed by both the conventional methods and the AI-assisted standards. The efficacy of all the studied modalities was compared by the paired sample t-test. RESULTS: The AI-assisted standards can provide much more accurate chronological age (CA) predictions with mean errors of less than 0.05 years, while the traditional methods presented overestimated results in both genders. For the GD children, the convolutional neural network (CNN) revealed the delayed DA in GD children of both genders, while the machine learning models presented so only in the GD boys. CONCLUSION: The AI-assisted DA assessments help overcome the long-standing populational limitation observed in traditional methods. The image feature extraction of the CNN models provided the best efficacy to reveal the nature of delayed DA in GD children of both genders.

Approaching patients with panfacial fractures by using an anatomical reference: A novel concept and preliminary study.

Panfacial fractures are challenging for craniofacial surgeons. Aside from involving multiple subunits, they also lack the reliability of a useful landmark of the facial skeleton. Properly, reducing and fixing palatal fracture to re-establish the premorbid maxillary dental arch is important. This was a retrospective study conducted from 2015 to 2020. All patients underwent computed tomography (CT) scan for surgical planning of orthognathic surgery due to either esthetic or occlusion concerns. The classification of occlusion was recorded as class I, II, and III. The parameters measured on CT were the distance between the midpoint of the supra-orbital foramen/notch (IS), mesio-buccal cusp tips (IB), central fossa (IC), palatal cusp tips (IP), and the midpoint of the palatal marginal gingiva (IM) of the bilateral maxillary first molars. The IS was compared with the IB, IC, IP, and IM. The results were analyzed by using one-way repeated measurement analysis of variance. Eighty-seven patients (36 men and 51 women) were included in the study. There were 13 patients of class I malocclusion, 8 of class II malocclusion, and 66 of class III malocclusion. The IS was comparable to the IC in all three groups. The IS can predict the IC, regardless of the patient's occlusion, and can be subsequently used to decide the width of maxillary dental arch in panfacial fracture management. Further studies are necessary to obtain more definite results.

Intraoperative Blood Loss and Postoperative Pain in the Sagittal Split Ramus Osteotomy and Intraoral Vertical Ramus Osteotomy: A Literature Review.

PURPOSE: The purpose of the present study was to review the literature regarding the blood loss and postoperative pain in the isolated sagittal split ramus osteotomy (SSRO) and intraoral vertical ramus osteotomy (IVRO). MATERIALS AND METHODS: Investigating the intraoperative blood loss and postoperative pain, articles were selected from 1970 to 2021 in the English published databases (PubMed, Web of Science, and Cochrane Library). Article retrieval and selection were performed by two authors, and they independently evaluated them based on the eligibility criteria. The articles meeting the search criteria had especially at least 30 patients. RESULTS: In the review of intraoperative blood loss, a total of 139 articles were retrieved and restricted to 6 articles (SSRO: 4; IVRO: 2). In the review of postoperative pain, a total of 174 articles were retrieved and restricted to 4 articles (SSRO: 3; IVRO: 1). The mean blood loss of SSRO and IVRO was ranged from 55 to 167 mL and 82 to 104 mL, respectively. The mean visual analog scale (VAS) scores of the first postoperative day were 2 to 5.3 in SSRO and 2.93 to 3.13 in IVRO. The mean VAS scores of the second postoperative day were 1 to 3 in SSRO and 1.1 to 1.8 in IVRO. CONCLUSION: Compared to traditional SSRO, IVRO had a significantly lower amount of blood loss. However, the blood transfusion is not necessary in a single-jaw operation (SSRO or IVRO). Postoperative pain was similar between SSRO and IVRO.

Three-Dimensional Outcome Assessments of Surgical Correction in Cleft and Noncleft Patients with Class III Skeletal Relation: A Case-Control Study.

BACKGROUND: The orthognathic strategies to treat patients with a concave profile but different tissue conditions remain controversial. The aim of this case-control study was to investigate the outcome predictability of orthognathic surgery in cleft lip and palate (CLP) patients and matched controls. METHODS: Fifty consecutive CLP and 45 matched non-CLP patients who received whole-piece Le Fort I and bilateral sagittal split osteotomy to correct class III skeletal relations were enrolled. The outcome discrepancies (ODs) from simulations among all groups were evaluated with consideration of the possible influences from planned surgical movements (PSM). Receiver operating characteristic curves were used to determine threshold values of PSMs that yielded clinically relevant OD. RESULTS: Unilateral CLP (UCLP) patients had comparable postsurgical OD to non-CLP patients in both jaws, whereas bilateral CLP (BCLP) patients had greater deviations from predicted results. Vertical movement of the A - point > 1.33 mm and yaw correction > 1.65° in the BCLP patients was associated with clinically relevant maxillary OD. CONCLUSIONS: The OGS outcomes of BCLP patients were less predictable than those of the UCLP and noncleft patients. Vertical movements of the A - point > 1.33 mm and yaw correction > 1.65° in BCLP patients increased OD to a clinically relevant extent.

Postsurgical Stability of Temporomandibular Joint of Skeletal Class III Patients Treated with 2-Jaw Orthognathic Surgery via Computer-Aided Three-Dimensional Simulation and Navigation in Orthognathic Surgery (CASNOS).

OBJECTIVE: The aim of this study is to clarify the postsurgical stability of temporomandibular joints in skeletal class III patients treated with 2-jaw orthognathic surgery which was performed utilizing computer-aided three-dimensional simulation and navigation in orthognathic surgery (CASNOS) protocol. MATERIALS AND METHODS: 23 consecutive nongrowing skeletal class III patients with mandibular prognathism associated with maxillary retrognathism treated with 2-jaw orthognathic surgery between 2018 and 2019 were enrolled in this study. The surgery was planned according to the standardized protocol of CASNOS (computer-aided three-dimensional simulation and navigation in orthognathic surgery). Computed tomography (CT) scans were performed in all patients 3 weeks presurgically and 6 months postsurgically. ITKSNAP and 3D Slicer software were used to reconstruct three-dimensional facial skeletal images, to carry out image segmentation, and to superimpose and quantify the TMJ position changes before and after surgery. Amount of displacement of the most medial and lateral points of the condyles and the change of intercondylar angles were measured to evaluate the postsurgical stability of TMJ. RESULTS: A total amount of 23 skeletal class III patients (female : male = 12 : 11) with age ranged from 20.3 to 33.5 years (mean: 24.39 ± 4.8 years old) underwent Le Fort I maxillary advancement and BSSO setback of the mandible. The surgical outcome revealed the satisfactory correction of their skeletal deformities. The mean displacement of the right most lateral condylar point (RL-RL') was 1.04 ± 0.42 mm and the mean displacement of the left most lateral condylar point (LL-LL') was 1.19 ± 0.41 mm. The mean displacement of the right most medial condylar point (RM-RM') was 1.03 ± 0.39 mm and the left most medial condylar point (LM-LM') was 0.96 ± 0.39 mm. The mean intercondylar angle was 161.61 ± 5.08° presurgically and 159.28 ± 4.92° postsurgically. CONCLUSION: The postsurgical position of TM joint condyles in our study only presented a mild change with all the landmark displacement within a range of 1.2 mm. This indicates the bimaxillary orthognathic surgery via 3D CASNOS protocol can achieve a desired and stable result of TMJ position in treating skeletal class III adult patients with retrognathic maxilla and prognathic mandible.

Relationship between the maxillofacial skeletal pattern and the morphology of the mandibular symphysis: Structural equation modeling.

OBJECTIVE: The purpose of this study was to investigate the relationship between the facial skeletal patterns and the shape of the mandibular symphysis in adults with malocclusion by using a structural equation model (SEM). METHODS: Ninety adults who had malocclusion and had records of facial skeletal measurements performed using cone-beam computed tomography were selected for this study. The skeletal measurements were classified into three groups (vertical, anteroposterior, and transverse). Cross-sectional images of the mandibular symphysis were analyzed using generalized Procrustes and principal component (PC) analyses. A SEM was constructed after the factors were extracted via factor analysis. RESULTS: Two factors were extracted from the transverse, vertical, and anteroposterior skeletal measurements. Latent variables were extracted for each factor. PC1, PC2, and PC3 were selected to analyze the variations of the mandibular symphyseal shape. The SEM was constructed using the skeletal variables, PCs, and latent variables. The SEM showed that the vertical latent variable exerted the most influence on the mandibular symphyseal shape. CONCLUSIONS: The relationship between the skeletal pattern and the mandibular symphysis was analyzed using a SEM, which showed that the vertical facial skeletal pattern had the highest effect on the shape of the mandibular symphysis.

The Inhibition of Radial and Axial Micromovement of Bone Scaffold with Gelfoam® and Titanium Mesh Fixation and Its Effects on Osteointegration.

A major drawback of nanocomposite scaffolds in bone tissue engineering is dimensional shrinkage after the fabrication process. Shrinkage yields gaps between the scaffold and host bone in the defect site and eventually causes failure in osteointegration by micromovement. The present study was conducted using titanium (Ti) mesh and Gelfoam® to prevent radial and axial micromovement, respectively. A critical-sized defect (CSD) was created in the center of the calvarium of Sprague Dawley rats to implant porous polydopamine-laced hydroxyapatite collagen calcium silicate (HCCS-PDA), a novel nanocomposite scaffold. Gelfoam® was applied around the edge of the defect, and then the HCCS-PDA scaffold was inserted in the defect area. Ti mesh was placed between the periosteum and skin right, above the inserted scaffold site. There were two test groups, with a fixture (Gelfoam® and Ti mesh) and without a fixture, each group contained five animals. The rats were sacrificed after three months post-operation. The explanted calvaria underwent micro-CT scanning and a push-out test to quantify osteointegration and mechanical strength between the scaffold and host bone. Histological analysis of undecalcified bone was performed by grinding resin infiltrated calvaria blocks to prepare 10 µm slices. Osteointegration was higher in the group with fixation than without fixation. Movement of the HCCS-PDA scaffold in the gap resulted in diminished osteointegration. With fixation, the movement was inhibited and osteointegration became prominent. Here we present a successful method of preventing axial and radial movement of scaffolds using Gelfoam® and Ti mesh. Applying this fixture, we expect that an HCCS-PDA scaffold can repair CSD more effectively.

Correlation between the cross-sectional morphology of the mandible and the three-dimensional facial skeletal pattern: A structural equation modeling approach.

OBJECTIVE: To clarify the relationship between the cross-sectional morphology of the mandible and vertical, transverse, and anteroposterior facial skeletal patterns using statistical shape analysis and structural equation modeling (SEM). MATERIALS AND METHODS: We used 150 cone beam computed tomography (CBCT) images to obtain three-dimensional (3D) facial landmarks and cross-sectional images of the mandible. The morphology of the inner and outer cortices of the mandible was analyzed using statistical shape analysis, including generalized Procrustes analysis and principal component analysis (PCA). Factor analysis was performed to determine factors pertaining to the skeletal measurements and shape variations for the inner and outer cortices, following which a structural equation model was constructed. RESULTS: Using factor analysis, characteristics of the vertical, transverse, and anteroposterior facial skeletal patterns were determined. PCA of the cross-sectional morphology of the mandible revealed 70% of the cumulative proportion by PC1 and PC2 after generalized Procrustes superimpositions. SEM showed complex relationships between the facial skeletal patterns and variations in the cross-sectional morphology of the mandibular cortices. The influence of the transverse factors on the outer cortex as a latent variable was relatively significant ( P = .057). However, the influence of the vertical factors on the outer and inner cortices was not significant. CONCLUSIONS: The transverse skeletal pattern is associated with the morphology of the outer cortex of the mandible.

Three-Dimensional Outcome Assessments of Cleft Lip and Palate Patients Undergoing Maxillary Advancement.

BACKGROUND: The aim of this retrospective case series study was to compare three-dimensional postsurgical outcomes of patients with cleft lip and palate following maxillary advancement. METHODS: Fifty consecutive cleft lip and palate patients who underwent whole-pieced Le Fort I advancements were assigned to the major (advancement ≥ 5 mm) or minor (advancement < 5 mm) groups. Three-dimensional surgical simulation was used for presurgical evaluation and planning. Virtual triangles of the presurgical, simulated, and 6-month postoperative stages were used for comparison. Translational and angular changes of each endpoint (A-point, MxR, and MxL) on the virtual triangles and reference planes were recorded and analyzed. Relationships between possible related variables and outcome discrepancies from simulations among all subgroups were also investigated. RESULTS: Analysis of covariance and the least significant difference test revealed that the outcome discrepancy measurements were affected by different combinations of independent variables. The reliability test showed high consistency of the authors' method for three-dimensional measurements. CONCLUSIONS: The actual surgical outcomes of cleft lip and palate patients differed from the virtual simulations. The outcome discrepancies are impacted by multiple factors. The outcome discrepancies of all rotational surgical corrections (roll, yaw, and pitch) were positively correlated to the degree of planned surgical movement. Meanwhile, bilateral cleft lip and palate patients are more likely to incur outcome discrepancies in yaw correction with major maxillary advancement. However, a maxillary advancement cutoff value of 5 mm would not necessarily lead to significant translational outcome discrepancies among cleft lip and palate patients. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.