Mass Spectrometry Imaging Reveals the Morphology-Dependent Toxicological Effects of Nanosilvers on Multiple Organs of Adult Zebrafish (Danio rerio).

Nanosilvers with multifarious morphologies have been extensively used in many fields, but their morphology-dependent toxicity toward nontarget aquatic organisms remains largely unclear. Herein, we used matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) to investigate the toxicological effects of silver nanomaterials with various morphologies on spatially resolved lipid profiles within multiple organs in adult zebrafish, especially for the gill, liver, and intestine. Integrated with histopathology, enzyme activity, accumulated Ag contents and amounts, as well as MSI results, we found that nanosilvers exhibit morphology-dependent nanotoxicity by disrupting lipid levels and producing oxidative stress. Silver nanospheres (AgNSs) had the highest toxicity toward adult zebrafish, whereas silver nanoflakes (AgNFs) exhibited greater toxicity than silver nanowires (AgNWs). Levels of differential phospholipids, such as PC, PE, PI, and PS, were associated with nanosilver morphology. Notably, we found that AgNSs induced greater toxicity in multiple organs, such as the brain, gill, and liver, while AgNWs and AgNFs caused greater toxicity in the intestine than AgNSs. Lipid functional disturbance and oxidative stress further caused inflammation and membrane damage after exposure to nanosilvers, especially with respect to sphere morphology. Taken together, these findings will contribute to clarifying the toxicological effects and mechanisms of different morphologies of nanosilvers in adult zebrafish.

Expression of TFRC helps to improve the antineoplastic effect of Ara-C on AML cells through a targeted delivery carrier.

BACKGROUND: Currently, high doses of cytarabine arabinoside (Ara-C)-based combined chemotherapy are commonly used in acute myeloid leukemia (AML) therapy, but severe adverse effects and poor suppression effects in leukemia cells limit the clinical therapeutic efficiency of Ara-C-based chemotherapy due to a lack of targeting selectivity. To improve the therapeutic effect of Ara-C in AML, here, since we confirmed that transferrin receptor 1 (TFRC) expression in AML cells was constant, we generated Ara-C@HFn by encapsulating free Ara-C into self-assembled heavy ferritin chain (HFn, the ligand of TFRC) nanocages. RESULTS: The analysis of clinically relevant data suggested that the high expression levels of TFRC from AML cells would not decrease significantly after treatment with Ara-C. Ara-C@HFn can be efficiently internalized by leukemia cells, showing stronger cytotoxic effects in vitro and reducing the burden of leukemia in AML mice more effectively in vivo than free Ara-C. Ara-C@HFn treatment showed no acute toxicity in visceral organs of mice. Moreover, the analysis of clinically relevant data also suggested that there are several drugs (such as tamibarotene and ABT199) that would not cause significant expression down-regulation of TFRC in AML cells (after treatment). CONCLUSION: The above results suggested that TFRC can be used as a constant and effective target for drug targeting delivery of AML cells. Thus Ara-C@HFn treatment can become a safe and efficient strategy for AML therapy by specifically delivering Ara-C to AML cells. Besides, the HFn nanocages are promising for improving antineoplastic effect of other AML-related therapy drugs that do not cause downregulated expression of TFRC in AML cells.

Sample preparation optimization of insects and zebrafish for whole-body mass spectrometry imaging.

Appropriate sample preparation is one of the most critical steps in mass spectrometry imaging (MSI), which is closely associated with reproducible and reliable images. Despite that model insects and organisms have been widely used in various research fields, including toxicology, drug discovery, disease models, and neurobiology, a systematic investigation on sample preparation optimization for MSI analysis has been relatively rare. Unlike mammalian tissues with satisfactory homogeneity, freezing sectioning of the whole body of insects is still challenging because some insect tissues are hard on the outside and soft on the inside, especially for some small and fragile insects. Herein, we systematically investigated the sample preparation conditions of various insects and model organisms, including honeybees (Apis cerana), oriental fruit flies (Bactrocera dorsalis), zebrafish (Danio rerio), fall armyworms (Spodoptera frugiperda), and diamondback moths (Plutella xylostella), for MSI. Three cutting temperatures, four embedding agents, and seven thicknesses were comprehensively investigated to achieve optimal sample preparation protocols for MSI analysis. The results presented herein indicated that the optimal cutting temperature and embedding agent were -20 °C and gelatin, respectively, providing better tissue integrity and less mass spectral interference. However, the optimal thickness for different organisms can vary with each individual. Using this optimized protocol, we exploited the potential of MSI for visualizing the tissue-specific distribution of endogenous lipids in four insects and zebrafish. Taken together, this work provides guidelines for the optimized sample preparation of insects and model organisms, facilitating the expansion of the potential of MSI in the life sciences and environmental sciences.

Printed highly conductive Cu films with strong adhesion enabled by low-energy photonic sintering on low-Tg flexible plastic substrate.

Copper (Cu) films and circuits were fabricated by screen-printing Cu nanoink on low-Tg (glass transition temperature) flexible plastic substrates (PEN and PET) instead of widely used high-Tg polyimide (PI) substrate. Photonic sintering of printed Cu films was carried out using intensive pulsed light (IPL). Low resistivities of 28 µΩ · cm on PEN and 44 µΩ · cm on PET were obtained without damaging the substrates. The sintered Cu films exhibited strong adhesion to PEN and PET substrates, with measured adhesion strength of 5B by the ASTM D3359 international standard, whereas the top part of the copper film on the PI substrate was stripped off during the adhesion test. The sintered Cu films also showed excellent stability in harsh conditions and mechanical flexibility in rolling tests. The underlying mechanisms of the high conductivity and strong adhesion on PEN and PET substrates with low-energy IPL sintering were investigated. Simple circuits and radio frequency identification antennas were made by screen-printing Cu nanoink and IPL sintering, demonstrating the technique's feasibility for practical applications.

Formation of Curvature Subunit of Carbon in Combustion.

Curvature prevalently exists in the world of carbon materials (e.g., fullerenes, buckyl bowls, carbon nanotubes, and onions), but traditional C2-addition mechanisms fail to elucidate the mechanism responsible for the formation of carbon curvature starting from a pentagonal carbon ring in currently available chemical-physical processes such as combustion. Here, we show a complete series of nascent pentagon-incorporating C5-C18 that are online produced in the flame of acetylene-cyclopentadiene-oxygen and in situ captured by C60 or trapped as polycyclic aromatic hydrocarbons for clarifying the growth of the curved subunit of C20H10. A mechanism regarding C1-substitution and C2-addition has been proposed for understanding the formation of curvature in carbon materials, as exemplified by the typical curved molecule containing a single pentagon completely surrounded by five hexagons. The present mechanism, supported by the intermediates characterized by X-ray crystallography as well as NMR, has been experimentally validated for the rational synthesis of curved molecule in the commercially useful combustion process.

Capturing the Fused-Pentagon C74 by Stepwise Chlorination.

As a bridge to connect medium-sized fullerenes, fused-pentagon C74 is still missing heretofore. Of 14 246 possible isomers, the first fused-pentagon C74 with the Fowler-Manolopoulos code of 14 049 was stabilized as C74Cl10 in the chlorine-involving carbon arc. The structure of C74Cl10 was identified by X-ray crystallography. The stabilization of pristine fused-pentagon C74 by stepwise chlorination was clarified in both theoretical simulation with density functional theory calculations and experimental fragmentation with multistage mass spectrometry.

Synthesis of long-sought C66 with exohedral stabilization.

Previously reported fused-pentagon fullerenes stabilized by exohedral derivatization do not share the same cage with those stabilized by endohedral encapsulation. Herein we report the crystallographic identification of (#4348)C66Cl10, which has the same cage as that of previously reported Sc2@C66. According to the geometrical data of (#4348)C66Cl10, both strain relief (at the fused pentagons) and local aromaticity (on the remaining sp(2)-hybrided carbon framework) contribute to the exohedral stabilization of this long-sought 66 carbon atom cage.

Prediction of compressive comfort of graded compression sleeves based on calf feature classification.

This study explored the relationship between the design of calf compression sleeves and the comfort of young women in long sitting and standing work environments. By studying the relationship between material elongation and comfort pressure, a prediction model was obtained. The characteristics of the calf models of 94 women were classified, and the influence of different calf characteristics on the pressure distribution and tensile value design was objectively analyzed through simulation tests. The samples were then produced based on the simulation results, and subjective and objective try-on tests and evaluations were carried out. The results show that the difference in the shape of the calf has a certain impact on the pressure distribution and comfort. The predicted value of the theoretical model is in good agreement with the actual test value. The sample can bring a suitable gradient pressure and meet the comfort requirements and safety standards.

Influence of the Hierarchy Structure of Aluminum Particles on Density, Combustion Efficiency, and Ignition Delay.

Aluminum nanoparticles (nAl) have received sustained interest due to their higher reactivity than micron aluminum particles (mAl). However, in practice, the densities of explosive formulations with nAl are far smaller than those with mAl, which greatly undercuts the energy release performance. To take advantages of both kinds of Al particles, in situ integration of mAl@nAl composites was proposed and evaluated. The mAl@nAl composites were prepared by in situ electrical explosion of Al wire. Their morphology, density, and specific surface area (SSA) were characterized by scanning electron microscope (SEM), densimetry, and Brunauer-Emmett-Teller (BET), respectively. SEM showed that nAl uniformly adhered to the surface of mAl. With the increase in voltage, the average diameter and density of the composites decreased, but the SSA of the composites increased. And the largest density of the composites was 1.13 g/cm3, comparable to that of the commercial graded Al product (1.25 g/cm3). Meanwhile, the highest SSA of the composites was 12.1192 m2/g. In addition, the combustion efficiency of mAl@nAl composites at 20 kV was 8.26% higher than that of physically graded counterparts. The constant-volume combustion test under zero oxygen balance revealed that the pressurization rate and peak pressure of mAl@nAl composites prepared at 20 kV were the highest of all. Furthermore, constant-volume combustion under constant heat showed that the combustion temperatures of mAl@nAl composites were 1.15-1.45 times higher than those of physically graded counterparts. Finally, the ignition delay of mAl@nAl composites was reduced with the increase in explosion voltage.

GABA-Decorated Nanocarrier for Smart Delivery of Fludioxonil for Targeted Control of Banana Wilt Disease.

Developing a targeted nanopesticide to control the vascular disease of banana in agriculture is crucial to improve pesticide utilization. In this study, according to the degree of functionalization, three γ-aminobutyric acid (GABA)-decorated nanocarriers (PSI-GABA8, PSI-GABA18, and PSI-GABA28) were constructed for smart delivery of nonsystemic fungicide in banana phloem tissues. Fludioxonil (Flu) was loaded in nanocarriers to form Flu@PSI-GABA nanoparticles with a core/shell structure for control of banana wilt disease. Results demonstrated that the delivery dosage of Flu was up to 1.6 mg/L in castor phloem sap using PSI-GABA28 nanocarriers. In vitro results showed that the EC50 of Flu@PSI-GABA28 was 0.0116 mg/L, and the inhibitory activity was about 8.8 times higher than that of technical-grade (TC) Flu. Flu@PSI-GABA28 could be transported for long distances and accumulated to the rhizome of banana by foliar application, and the control effectiveness was about 20 times that of the conventional Flu (50% WP) for the banana wilt. This study provides a distinctive guidance for effective control of vascular diseases in precision agriculture application.

Mechanism of Rotenone Toxicity against Plutella xylostella: New Perspective from a Spatial Metabolomics and Lipidomics Study.

The botanical pesticide rotenone can effectively control target pest Plutella xylostella, yet insights into in situ metabolic regulation of P. xylostella toward rotenone remain limited. Herein, we demonstrated metabolic expression levels and spatial distribution of rotenone-treated P. xylostella using spatial metabolomics and lipidomics. Specifically, rotenone significantly affected purine and amino acid metabolisms, indicating that adenosine monophosphate and inosine were distributed in the whole body of P. xylostella with elevated levels, while guanosine 5'-monophosphate and tryptophan were significantly downregulated. Spatial lipidomics results indicated that rotenone may significantly destroy glycerophospholipids in cell membranes of P. xylostella, inhibit fatty acid biosynthesis, and consume diacylglycerol to enhance fat oxidation. These findings revealed that high toxicity of rotenone toward P. xylostella may be ascribed to negative effects on energy production and amino acid synthesis and damage to cell membranes, providing guidelines for the toxicity mechanism of rotenone on target pests and rational development of botanical pesticide candidates.

Metabolomics and mass spectrometry imaging reveal the chronic toxicity of indoxacarb to adult zebrafish (Danio rerio) livers.

Indoxacarb is a widely used insecticide in the prevention and control of agricultural pests, whereas its negative effects on non-target organisms remain largely unclear. Herein, we demonstrated the integrated metabolomics and mass spectrometry imaging (MSI) methods to investigate the chronic exposure toxicity of indoxacarb at environmentally relevant concentrations in adult zebrafish (Danio rerio) liver. Results showed that movement behaviors of zebrafish can be affected and catalase (CAT), glutamic oxalacetic transaminase (GOT), and glutamic pyruvic transaminase (GPT) activities were significantly increased after indoxacarb exposure for 28 days. Pathological analysis of zebrafish livers also showed that cavitation and pathological reactions occur. Metabolomics results indicated that metabolic pathways of zebrafish liver could be significantly affected by indoxacarb, such as tricarboxylic acid (TCA) cycle and various amino acid metabolisms. MSI results revealed the spatial differentiation of crucial metabolites involved in these metabolic pathways within zebrafish liver. Taken together, these integrated MSI and metabolomics results revealed that the toxicity of indoxacarb arises from metabolic pathways disturbance, which resulted in the decrease of liver detoxification ability. These findings will promote the current understanding of pesticide risks and metabolic disorders in zebrafish liver, which provide new insights into the environmental risk assessment of insecticides on aquatic organisms.

Integrated mass spectrometry imaging and metabolomics reveals sublethal effects of indoxacarb on the red fire ant Solenopsis invicta.

BACKGROUND: Indoxacarb, representing an efficient insecticide, is normally made into a bait to spread the poison among red fire ants so that it can be widely applied in the prevention and control of Solenopsis invicta. However, the potential toxicity mechanism of S. invicta in response to indoxacarb remains to be explored. In this study, we integrated mass spectrometry imaging (MSI) and untargeted metabolomics methods to reveal disturbed metabolic expression levels and spatial distribution within the whole-body tissue of S. invicta treated with indoxacarb. RESULTS: Metabolomics results showed a significantly altered level of metabolites after indoxacarb treatment, such as carbohydrates, amino acids and pyrimidine and derivatives. Additionally, the spatial distribution and regulation of several crucial metabolites resulting from the metabolic pathway and lipids can be visualized using label-free MSI methods. Specifically, xylitol, aspartate, and uracil were distributed throughout the whole body of S. invicta, while sucrose-6'-phosphate and glycerol were mainly distributed in the abdomen of S. invicta, and thymine was distributed in the head and chest of S. invicta. Taken together, the integrated MSI and metabolomics results indicated that the toxicity mechanism of indoxacarb in S. invicta is closely associated with the disturbance in several key metabolic pathways, such as pyrimidine metabolism, aspartate metabolism, pentose and glucuronate interconversions, and inhibited energy synthesis. CONCLUSION: Collectively, these findings provide a new perspective for the understanding of toxicity assessment between targeted organisms S. invicta and pesticides. © 2023 Society of Chemical Industry.

Comparative Study on Thermal Response Mechanism of Two Binders during Slow Cook-Off.

The HTPE (hydroxyl-terminated polyether) propellant had a lower ignition temperature (150 °C vs. 240 °C) than the HTPB (hydroxy-terminated polybutadiene) propellant in the slow cook-off test. The reactions of the two propellants were combustion and explosion, respectively. A series of experiments including the changes of colors and the intensity of infrared characteristic peaks were designed to characterize the differences in the thermal response mechanisms of the HTPB and HTPE binder systems. As a solid phase filler to accidental ignition, the weight loss and microscopic morphology of AP (30~230 °C) were observed by TG and SEM. The defects of the propellant caused by the cook-off were quantitatively analyzed by the box counting method. Above 120 °C, the HTPE propellant began to melt and disperse in the holes, filling the cracks, which generated during the decomposition of AP at a low temperature. Melting products were called the "high-temperature self-repair body". A series of analyses proved that the different thermal responses of the two binders were the main cause of the slow cook-off results, which were likewise verified in the propellant mechanical properties and gel fraction test. From the microscopic point of view, the mechanism of HTPE's slow cook-off performance superior to HTPB was revealed in this article.

Nitrogen-rich energetic polymer powered aluminum particles with enhanced reactivity and energy content.

Aluminum particles are of significant interest in enhancing the energy release performance of explosives. One of the major impediments to their use is that Al2O3 shell significantly decreases overall performance. To address this issue, we investigate creating aluminum particles with a glycidyl azide polymer (GAP) coating to improve their reactivity while retaining their energy content. We found that the aluminum particles were coated with a GAP layer of thickness around 8.5 nm. The coated aluminum particles were compared to non-coated powder by the corresponding reactivity parameters obtained from simultaneous differential scanning calorimetry, thermal gravimetric analysis, coupled with mass spectral and infrared spectral analyses. Besides, the comparison on the energy content was also conducted based on P-t tests and a laser-induced air shock from energetic materials (LASEM) technique. It was found that GAP shifted the oxidation onset of aluminum particles to a lower temperature by ~ 10 °C. Besides, the oxidation activation energy of aluminum particles was also reduced by ~ 15 kJ mol-1. In return, aluminum particles reduced the activation energy of the second stage decomposition of the GAP by 276 kJ mol-1. And due to the synergistic effect between aluminum and GAP, the decomposition products of GAP were prone to be oxycarbide species rather than carbonitride species. In addition, the P-t test showed the peak pressure and pressurization rate of GAP coated aluminum particles were separately 1.4 times and 1.9 times as large as those of non-coated aluminum particles. Furthermore, the LASEM experiment suggested the shock wave velocity of the GAP coated aluminum particles was larger than that of non-coated aluminum particles, and the largest velocity difference for them could be 0.6 km s-1. This study suggests after coating by GAP, the aluminum particles possess enhanced reaction performance, which shows potential application value in the fields of aluminized explosives and other energetic fields.

High performance printed organic electrochromic devices based on an optimized UV curable solid-state electrolyte.

Manufacturing cost is a major concern for electrochromic device (ECD) applications in smart windows for energy saving and low-carbon economy. Fully printing instead of a vacuum-based chemical vapor deposition (CVD) process is favored for large-scale fabrication of ECDs. To adapt to the screen printing process, a UV curable solid-state electrolyte based on lithium bis(trifluoromethane-sulfonyl) imide (LiTFSI) was specially formulated. It contains poly(ethylene glycol) diacrylate (PEG-DA), LiTFSI, water, and ethyl acetate. The optimized ECDs have achieved a 0.6 s bleaching time at 0.6 V and a 1.4 s coloring time at -0.5 V. The ECDs also exhibited excellent stability, which could endure 100 000 cycles of color switching while still maintaining 35% of transmittance change at a 550 nm wavelength. A demo ECD has been fabricated with a screen printed electrolyte, exhibiting stable switching between the clear state and patterned color state.

Stereoselective toxicity mechanism of neonicotinoid dinotefuran in honeybees: New perspective from a spatial metabolomics study.

Development of stereoisomeric neonicotinoid pesticides with lower toxicity is key to preventing global population declines of honeybees, whereas little is known about the in situ metabolic regulation of honeybees in response to stereoisomeric pesticides. Herein, we demonstrate an integrated mass spectrometry imaging (MSI) and untargeted metabolomics method to disclose disturbed metabolic expression levels and spatial differentiation in honeybees (Apis cerana) associated with stereoisomeric dinotefuran. This method affords a metabolic network mapping capability regarding a wide range of metabolites involved in multiple metabolic pathways in honeybees. Metabolomics results indicate more metabolic pathways of honeybees can be significantly affected by S-(+)-dinotefuran than R-(-)-dinotefuran, such as tricarboxylic acid (TCA) cycle, glyoxylate and dicarboxylate metabolism, and various amino acid metabolisms. MSI results demonstrate the cross-regulation and spatial differentiation of crucial metabolites involved in the TCA cycle, purine, glycolysis, and amino acid metabolisms within honeybees. Taken together, the integrated MSI and metabolomics results indicated the higher toxicity of S-(+)-dinotefuran arises from metabolic pathway disturbance and its inhibitory role in the energy metabolism, resulting in significantly reduced degradation rates of detoxification mechanisms. From the view of spatial metabolomics, our findings provide novel perspectives for the development and applications of pure chiral agrochemicals.

Fabrication of Energetic Composites with 91% Solid Content by 3D Direct Writing.

Direct writing is a rapidly developing manufacturing technology that is convenient, adaptable and automated. It has been used in energetic composites to manufacture complex structures, improve product safety, and reduce waste. This work is aimed at probing the formability properties and combustion performances of aluminum/ammonium perchlorate with a high solid content for direct writing fabrication. Four kinds of samples with different solid content were successfully printed by adjusting printing parameters and inks formulas with excellent rheological behavior and combustion properties. A high solid content of 91% was manufactured and facile processed into complex structures. Micromorphology, rheology, density, burning rate, heat of combustion and combustion performance were evaluated to characterized four kinds of samples. As the solid content increases, the density, burning rate and heat of combustion are greatly enhanced. Based on 3D direct writing technology, complex energetic 3D structures with 91% solid content are shaped easier and more flexibly than in traditional manufacturing process, which provides a novel way for the manufacture of complicated structures of energetic components.

Rapid structural discrimination of IgG antibodies by multicharge-state collision-induced unfolding.

Immunoglobulin G (IgG) antibodies are an important class of biotherapeutics that target various diseases, such as cancers, neurodegenerative disorders, and autoimmune diseases, yet rapid discrimination of IgG antibodies remains a great challenge due to heterogeneity, flexibility, and large size. Herein, we demonstrate a simplified multicharge-state collision-induced unfolding (CIU) method for rapid differentiation of four IgG isotypes that differ in terms of the numbers and patterns of disulfide bonds, bypassing tedious single charge-state selection in advance. The results presented herein reveal that gas-phase unfolding behaviors have a strong dependence on charge states outside IgG surfaces; therefore, multicharge-state CIU analysis of IgG subtypes could offer a great opportunity to gain deeper insights into their gas-phase structural differentiation. The full discrimination of IgG antibody isoforms that possess different disulfide bond numbers and even subtle disulfide bonding patterns can be achieved based on their charge-dependent gas-phase unfolding behaviors and root-mean square deviation in CIU difference spectra. Taken together, the incorporation of all charge states observed in a native ion mobility-mass spectrometry (IM-MS) experiment to CIU analysis could make this strategy sensitive to more subtle structural discrepancies, facilitating the rapid discrimination and evaluation of innovative structurally similar biotherapeutic candidates with unexplored functions.

Insights into the degradation and toxicity difference mechanism of neonicotinoid pesticides in honeybees by mass spectrometry imaging.

Honeybees are essential for the pollination of a wide variety of crops and flowering plants, whereas they are confronting decline around the world due to the overuse of pesticides, especially neonicotinoids. The mechanism behind the negative impacts of neonicotinoids on honeybees has attracted considerable interest, yet it remains unknown due to the limited insights into the spatiotemporal distribution of pesticides in honeybees. Herein, we demonstrated the use of matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) for the spatiotemporal visualization of neonicotinoids, such as N-nitroguanidine (dinotefuran) and N-cyanoamidine (acetamiprid) compounds, administered by oral application or direct contact, in the whole-body section of honeybees. The MSI results revealed that both dinotefuran and acetamiprid can quickly penetrate various biological barriers and distribute within the whole-body section of honeybees, but acetamiprid can be degraded much faster than dinotefuran. The degradation rate of acetamiprid is significantly decreased when piperonyl butoxide (PBO) is applied, whereas that of dinotefuran remains almost unchanged. These two factors might contribute to the fact that dinotefuran affords a higher toxicity to honeybees than acetamiprid. Moreover, the toxicity and degradation rate of acetamiprid can be affected by co-application with tebuconazole. Taken together, the results presented here indicate that the discrepant toxicity between dinotefuran and acetamiprid does not lie in the difference in their penetration of various biological barriers of honeybees, but in the degradation rate of neonicotinoid pesticides within honeybee tissues. Moreover, new perspectives are given to better understand the causes of the current decline in honeybee populations posed by insecticides, providing guidelines for the precise use of conventional agrochemicals and the rational design of novel pesticide candidates.