Hook-Like DNAzyme-Activated Autocatalytic Biosensor for the Universal Detection of Pathogenic Bacteria.

DNAzyme-based assays have found extensive utility in pathogenic bacteria detection but often suffer from limited sensitivity and specificity. The integration of a signal amplification strategy could address this challenge, while the existing combination methods require extensive modification to accommodate various DNAzymes, limiting the wide-spectrum bacteria detection. We introduced a novel hook-like DNAzyme-activated autocatalytic nucleic acid circuit for universal pathogenic bacteria detection. The hook-like connector DNA was employed to seamlessly integrate the recognition element DNAzyme with the isothermal enzyme-free autocatalytic hybridization chain reaction and catalytic hairpin assembly for robust exponential signal amplification. This innovative autocatalytic circuit substantially amplifies the output signals from the DNAzyme recognition module, effectively overcoming DNAzyme's inherent sensitivity constraints in pathogen identification. The biosensor exhibits a strong linear response within a range of 1.5 × 103 to 3.7 × 107 CFU/mL, achieving a detection limit of 1.3 × 103 CFU/mL. Noted that the sensor's adaptability as a universal detection platform is established by simply modifying the hook-like connector module, enabling the detection of various pathogenic bacteria of considerable public health importance reported by the World Health Organization, including Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, and Salmonella typhimurium. Additionally, the specificity of DNAzyme in bacterial detection is markedly improved due to the signal amplification process of the autocatalytic circuit. This hook-like DNAzyme-activated autocatalytic platform presents a versatile, sensitive, and specific approach for pathogenic bacteria detection, promising to significantly expand the applications of DNAzyme in bacteria detection.

An Intelligent Laser-Free Photodynamic Therapy Based on Endogenous miRNA-Amplified CRET Nanoplatform.

Laser-free photodynamic therapy (PDT) is a promising noninvasive therapeutic modality for deep-seated tumor, yet is constrained by low efficiency due to the limited stimulation strategies. Herein, a novel miRNA-responsive laser-free PDT was developed through metal-organic frameworks (MOFs)-mediated chemiluminescence resonance energy transfer (CRET) nanoplatform. The photosensitizer chlorin e6 (Ce6)-loaded MOFs were functionalized with hairpin nucleic acids for sensitive responsiveness of tumor biomarker miRNA through catalytic hairpin assembly (CHA), which enabled the amplified assembly of horseradish peroxidase (HRP)-mimicking hemin/G-quadruplex DNAzyme on MOFs. Simultaneously, the on-MOF assembled DNAzymes efficiently catalyzed chemiluminescence reaction to stimulate adjacent Ce6 in the presence of luminol and H2 O2 , thus allowing the CRET-mediated Ce6 luminescence and reactive oxygen species (ROS) generation for self-illuminating PDT. The CRET nanoplatform achieved significant malignant cell apoptosis and tumor inhibition effects without external laser irradiation. It is envisioned that the miRNA-amplified CRET nanoplatform might be a selective and highly efficient antitumor nanomedicine for precise theranostic.

Dual-Signal Cascaded Nucleic Acid Amplification Circuit-Loaded Metal-Organic Frameworks for Accurate and Robust Imaging of Intracellular MicroRNA.

Cascaded signal amplification technologies play an important role in the sensitive detection of lowly expressed biomarkers of interests yet are constrained by severe background interference and low cellular accessibility. Herein, we constructed a metal-organic framework-encapsulating dual-signal cascaded nucleic acid sensor for precise intracellular miRNA imaging. ZIF-8 nanoparticles load and deliver FAM-labeled upstream catalytic hairpin assembly (CHA) and Cy5-modified downstream hybridization chain reaction (HCR) hairpin reactants to tumor cells, enabling visualization of the target-initiated signal amplification process for double-insurance detection of analytes. The pH-responsive ZIF-8 nanoparticles effectively protect DNA hairpins from degradation and allow the release of them in the acid tumor microenvironment. Then, intracellular target miRNAs orderly trigger cascaded nucleic acid signal amplification reaction, of which the exact progress is investigated through the analysis of the fluorescence recovering process of FAM and Cy5. In addition, DNA@ZIF-8 nanoparticles improve measurement accuracy by dual-signal colocalization imaging, effectively avoiding nonspecific false-positive signals and enabling in situ imaging of miRNAs in living cells. A dual-signal colocalization strategy allows accurate target detection in living cells, and DNA@ZIF-8 provides a promising intracellular sensing platform for signal amplification and visual monitoring.

Chemiluminescence resonance energy transfer-based multistage nucleic acid amplification circuits for MiRNA detection with low background.

Chemiluminescence resonance energy transfer (CRET)-based assays have shown great potential in biosensing due to their negligible background autofluorescence, yet are still limited by their low sensitivity and short half-life luminescence. Herein, a multistage CRET-based DNA circuit was constructed with amplified luminescence signals for accurate miRNA detection and fixed reactive oxygen species (ROS) signals for cell imaging. The DNA circuit is designed through an ingenious programmable catalytic hairpin assembly (CHA), hybridization chain reaction (HCR), and the use of DNAzyme to realize target-triggered precise regulation of distance between the donor and acceptor for CRET-mediated excitation of photosensitizers. In detail, the analyte catalyzes the hybridization of CHA reactants, which leads to the assembly of multiple HCR-mediated DNAzyme nanowires. Subsequently, DNAzymes catalyze the oxidation of luminol by H2O2, and the adjacent photosensitizer chlorin e6 (Ce6) anchored on the DNA nanostructure is stimulated by the CRET process, resulting in the amplified long-wavelength luminescence and the generation of single oxygen signals through further energy transfer to oxygen. The biomarker miRNA can be detected with great sensitivity by integrating the recognition module into a universal platform. Furthermore, the DNA circuit enables CRET-mediated intracellular miRNA imaging, by detecting singlet oxygen signals through a ROS probe. The significant amplification effect is attributed to the robust multiple recognition of the target and the guaranteed transduction of the CRET signal through programmable engineering of DNA nanostructures. The CRET-based DNA circuit achieves amplified long-wavelength luminescence for accurate miRNA detection with low background and ROS-mediated signal fixation for cell imaging, making it a promising candidate for early diagnosis and theranostics.

Mitochondria MicroRNA Spatial Imaging via pH-Responsive Exonuclease-Assisted AIE Nanoreporter.

Mitochondrial microRNAs (mitomiRs) critically orchestrate mitochondrial functions. Spatial imaging of mitomiRs is essential to understand its clinical value in diagnosis and prognosis. However, the direct monitoring of mitomiRs in living cells remains a key challenge. Herein, we report an AIE nanoreporter strategy for mitomiRs imaging in living cells through pH-controlled exonuclease (Exo)-assisted target cycle signal amplification. The AIE-labeled DNA detection probes are conjugated on Exo III encapsulated polymeric nanoparticles (NPs) via consecutive adenines (polyA). The amplified sensing functions are off during the cytoplasm delivery process, and it can be spatially switched from off to on when in the alkaline mitochondria (about pH 8) after triphenylphosphonium (TPP)-mediated mitochondrial targeting. Where the NPs degraded to release Exo III and cancer-specific mitomiRs hybridize with AIE-labeled DNA detection probes to expose the cleavage site of released Exo III, enabling spatially restricted mitomiRs imaging. The mitomiRs expression fluctuation was also realized. This study contributes to a facile strategy that could easily extend to a broad application for the understanding of mitomiRs-related pathological processes.

Rational design of a supramolecular hydrogel with customizable pH-responsiveness on the basis of pH-induced ionization/protonation transition of BSA.

Developing customizable pH-responsiveness for supramolecular hydrogels is of great significance and has drawn tremendous attention. Through systematic simulation analysis, we formulated a simple supramolecular hydrogel (i.e., poly(AAm-co-NaSS)/BSA on the basis of electrostatic interaction between the sulfonate groups of poly(AAm-co-NaSS) and the protonated side groups of BSA, and proposed a novel pH-responsive mode for it: changing the internal electric charge composition of the hydrogel through pH-induced ionization/protonation transition of BSA, thereby regulating the structural stability/shrinkage/extension of the supramolecular network. On basis of this theory, the pH-responsiveness of the poly(AAm-co-NaSS)/BSA hydrogel, in principle, could be pre-designed by adjusting the initial BSA/NaSS ratio. In this regard, we fabricated a poly(AAm-co-NaSS)/BSA hydrogel prototype with a BSA/NaSS ratio of 1/57 and investigated its rheological/swelling/disassembling behavior under different pH conditions (1.7, 4.7, 7.7, 10.7, and 13.7). In addition, we also prepared two capecitabine-loaded poly(AAm-co-NaSS)/BSA hydrogel prototypes with BSA/NaSS ratios of 1/57 and 1/102 respectively at pH 4.0, and compared their drug release behavior in SGF and SIF. Finally, the experimental results fitted well with our theoretical expectations, which testified the rationality of our assumption. Thus, we believed that the poly(AAm-co-NaSS)/BSA supramolecular hydrogel could find diverse applications in the future.

Recent progress in Fenton/Fenton-like reactions for the removal of antibiotics in aqueous environments.

The frequent use of antibiotics allows them to enter aqueous environments via wastewater, and many types of antibiotics accumulate in the environment due to difficult degradation, causing a threat to environmental health. It is crucial to adopt effective technical means to remove antibiotics in aqueous environments. The Fenton reaction, as an effective organic pollution treatment technology, is particularly suitable for the treatment of antibiotics, and at present, it is one of the most promising advanced oxidation technologies. Specifically, rapid Fenton oxidation, which features high removal efficiency, thorough reactions, negligible secondary pollution, etc., has led to many studies on using the Fenton reaction to degrade antibiotics. This paper summarizes recent progress on the removal of antibiotics in aqueous environments by Fenton and Fenton-like reactions. First, the applications of various Fenton and Fenton-like oxidation technologies to the removal of antibiotics are summarized; then, the advantages and disadvantages of these technologies are further summarized. Compared with Fenton oxidation, Fenton-like oxidations exhibit milder reaction conditions, wider application ranges, great reduction in economic costs, and great improved cycle times, in addition to simple and easy recycling of the catalyst. Finally, based on the above analysis, we discuss the potential for the removal of antibiotics under different application scenarios. This review will enable the selection of a suitable Fenton system to treat antibiotics according to practical conditions and will also aid the development of more advanced Fenton technologies for removing antibiotics and other organic pollutants.

Green and efficient degradation of cefoperazone sodium by Bi4O5Br2 leading to the production of non-toxic products: Performance and degradation pathway.

Photocatalytic process represents a promising approach to overcome the pollution challenge associated with the antibiotics-containing wastewater. This study provides a green, efficient and novel approach to remove cephalosporins, particularly cefoperazone sodium (CFP). Bi4O5Br2 was chosen for the first time to systematically study its degradation for CFP, including the analysis of material structure, degradation performance, the structure and toxicity of the transformation products, etc. The degradation rate results indicated that Bi4O5Br2 had an excellent catalytic activity leading to 78% CFP removal compared with the pure BiOBr (38%) within 120 min of visible light irradiation. In addition, the Bi4O5Br2 presents high stability and good organic carbon removal efficiency. The effects of the solution pH (3.12 - 8.75) on catalytic activity revealed that CFP was mainly photocatalyzed under acidic conditions and hydrolyzed under alkaline conditions. Combined with active species and degradation product identification, the photocatalytic degradation pathways of CFP by Bi4O5Br2 was proposed, including hydrolysis, oxidation, reduction and decarboxylation. Most importantly, the identified products were all hydrolysis rather than oxidation byproducts transformed from the intermediate of ß-lactam bond cleavage in CFP molecule, quite different from the mostly previous studies. Furthermore, the final products were demonstrated to be less toxic through the toxicity analysis. Overall, this study illustrates the detailed mechanism of CFP degradation by Bi4O5Br2 and confirms Bi4O5Br2 to be a promising material for the photodegradation of CFP.

A red-emitting indolium fluorescence probe for membranes - flavonoids interactions.

The red-emitting indolium derivative compound (E)-2-(4-(diphenylamino)styryl)-1,3,3-trimethyl-3H-indol-1-ium iodide (H3) was demonstrated as a sensitive membrane fluorescence probe. The probe located at the interface of liposomes when mixed showed much fluorescence enhancement by inhibiting the twisted intramolecular charge transfer state. After ultrasonic treatment, it penetrated into lipid bilayers with the emissions leveling off and a rather large encapsulation efficiency (71.4%) in liposomes. The ζ-potential and particle size measurement confirmed that the charged indolium group was embedded deeply into lipid bilayers. The probe was then used to monitor the affinities of antioxidant flavonoids for membranes. It was verified that quercetin easily interacted with liposomes and dissociated the probe from the internal lipid within 60 s under the condition of simply mixing. The assessment of binding affinities of six flavonoids and the coincident results with their antioxidation activities indicated that it was a promising membrane probe for the study of drug bio-affinities.

OFF/ON Red-Emitting Fluorescent Probes for Casein Recognition and Quantification Based on Indolium Derivatives.

Five derivatives of 2, 3, 3-trimethyl-3H-indolium containing different electron donor groups (H1 - H5) were synthesized for the determination of proteins. H3, a sensitive red-emitting fluorescent probe, was found for the discrimination of hydrophobic proteins from hydrophilic. The OFF - ON fluorescence switch of H3 was caused by the formation of twisted intramolecular charge-transfer (TICT) state when it combined with hydrophobic proteins in aqueous buffer. There was a good linear relationship between the emission intensity of H3 and the casein concentration (r = 0.9989). Based on this, a novel casein quantitative assay method was developed, and the method was applied to determinate casein in milk powder samples. Successfully, the results were in good agreement with Biuret method. In addition, a simple and sensitive method was established to differentiate and quantify three casein components (α-, ß-, and κ-casein) due to their much different binding constants to H3 probe.

Two Sensitive Fluorescent BOPIM Probes with Tunable TICT Character for Low-Level Water Detection in Organic Solvents.

Two novel Boron-fluorine derivatives bearing dimethylamino moieties, BOPIM-1 and BOPIM-2, were proposed as sensitive fluorescent sensors for low-level water quantification in organic solvents. Two BOPIMs exhibit typical phenomenon for an emission from a twisted intra-molecular charge transfer (TICT) state, the emission red shift and intensity weakening with solvent polarity. Introduction of trace amount of water to solvent resulted in fluorescent quenching, accompanied by the red shift of the emission, which was attributed to the formation of TICT excitation of BOPIMs by hydrolysis. A quantification method to detect water content was developed, described by a linear equation lg(I/I(0)) vs. lg φ(w) in the range of φ(w) (volume fraction of water) 0.001~0.01, 0.01~0.1, respectively. The experiment results of determination of water in real 1, 4-dioxane (Diox) samples proved that this method can be used in practical application.

CT radiation profile width measurement using CR imaging plate raw data.

This technical note demonstrates computed tomography (CT) radiation profile measurement using computed radiography (CR) imaging plate raw data showing it is possible to perform the CT collimation width measurement using a single scan without saturating the imaging plate. Previously described methods require careful adjustments to the CR reader settings in order to avoid signal clipping in the CR processed image. CT radiation profile measurements were taken as part of routine quality control on 14 CT scanners from four vendors. CR cassettes were placed on the CT scanner bed, raised to isocenter, and leveled. Axial scans were taken at all available collimations, advancing the cassette for each scan. The CR plates were processed and raw CR data were analyzed using MATLAB scripts to measure collimation widths. The raw data approach was compared with previously established methodology. The quality control analysis scripts are released as open source using creative commons licensing. A log-linear relationship was found between raw pixel value and air kerma, and raw data collimation width measurements were in agreement with CR-processed, bit-reduced data, using previously described methodology. The raw data approach, with intrinsically wider dynamic range, allows improved measurement flexibility and precision. As a result, we demonstrate a methodology for CT collimation width measurements using a single CT scan and without the need for CR scanning parameter adjustments which is more convenient for routine quality control work.

The special optical properties and application of the heterocyclic compound diethyl 6-anilino-5H-2,3-dithia-5,7-diazacyclopenta(cd)indene-1,4-dicarboxylate.

The heterocyclic compound diethyl 6-anilino-5H-2,3-dithia-5,7-diazacyclopenta(cd)indene-1,4-dicarboxylate (D1) was found to form highly emissive aggregates in polar solvents, and the aggregate emission can be tuned by the simple addition of water to a dimethylsulfoxide solution. A theoretical study based on Density functional theory (DFT) calculations, shows that intermolecular interactions of D1 with solvent may be potential factors in the fluorescence change. In addition, the phenyl ring in D1 plays an important role because of its response to solvent. In the non-aggregated state, deprotonation of the N-H of D1 can proceed easily on the addition of base, and the deprotonated compound might interact with Ag(+), resulting in a significant change in color and fluorescence quenching, which make it a potential chemosensor for the selective detection of trace amounts of Ag(+).

Inducing in situ M2 macrophage polarization to promote the repair of bone defects via scaffold-mediated sustained delivery of luteolin.

Immunoregulation mediated bone tissue engineering (BTE) has demonstrated huge potential in promoting repair of critical-size bone defects (CSBDs). The trade-off between stable immunoregulation function and extended immunoregulation period has posed a great challenge to this strategy. Here, we reported a 3D porous biodegradable Poly(HEMA-co-3APBA)/LUT scaffold, in which reversible boronic acid ester bond was formed between the 3APBA moiety and the catechol moiety of luteolin (LUT). The boronic acid ester bond not only protected the bioactivity of LUT but also extended the release period of LUT. The rationale behind the phenomenon of sustained LUT release was explained using a classical transition state theory. In vitro/in vivo assays proved the immunoregulation function of the scaffold in inducing M2 polarization of both M0 and M1 Mφ. The crosstalk between the scaffold treated Raw 264.7 and BMSCs were also investigated through the in vitro co-culture assay. The results demonstrated that the scaffold could induce immunoregulation mediated osteogenic differentiation of BMSCs. In addition, CSBDs model of SD rats was also applied, and the corresponding data proved that the scaffold could accelerate new bone formation, therefore promoting repair of CSBDs. The as-prepared scaffold might be a promising candidate for repair of CSBDs in the future.

Integration of Isothermal Enzyme-Free Nucleic Acid Circuits for High-Performance Biosensing Applications.

The isothermal enzyme-free nucleic acid amplification method plays an indispensable role in biosensing by virtue of its simple, robust, and highly efficient properties without the assistance of temperature cycling or/and enzymatic biocatalysis. Up to now, enzyme-free nucleic acid amplification has been extensively utilized for biological assays and has achieved the highly sensitive detection of various biological targets, including DNAs, RNAs, small molecules, proteins, and even cells. In this Review, the mechanisms of entropy-driven reaction, hybridization chain reaction, catalytic hairpin assembly and DNAzyme are concisely described and their recent application as biosensors is comprehensively summarized. Furthermore, the current problems and the developments of these DNA circuits are also discussed.

Binary Double Network-like Structure: An Effective Energy-Dissipation System for Strong Tough Hydrogel Design.

Currently, hydrogels simultaneously featuring high strength, high toughness, superior recoverability, and benign anti-fatigue properties have demonstrated great application potential in broad fields; thus, great efforts have been made by researchers to develop satisfactory hydrogels. Inspired by the double network (DN)-like theory, we previously reported a novel high-strength/high-toughness hydrogel which had two consecutive energy-dissipation systems, namely, the unzipping of coordinate bonds and the dissociation of the crystalline network. However, this structural design greatly damaged its stretchability, toughness recoverability, shape recoverability, and anti-fatigue capability. Thus, we realized that a soft/ductile matrix is indispensable for an advanced strong tough hydrogel. On basis of our previous work, we herein reported a modified energy-dissipation model, namely, a "binary DN-like structure" for strong tough hydrogel design for the first time. This structural model comprises three interpenetrated polymer networks: a covalent/ionic dually crosslinked tightened polymer network (stiff, first order network), a constrictive crystalline polymer network (sub-stiff, second order network), and a ductile/flexible polymer network (soft, third order network). We hypothesized that under low tension, the first order network served as the sacrificing phase through decoordination of ionic crosslinks, while the second order and third order networks together functioned as the elastic matrix phase; under high tension, the second order network worked as the energy dissipation phase (ionic crosslinks have been destroyed at the time), while the third order network played the role of the elastic matrix phase. Owing to the "binary DN-like" structure, the as-prepared hydrogel, in principle, should demonstrate enhanced energy dissipation capability, toughness/shape recoverability, and anti-fatigue/anti-tearing capability. Finally, through a series of characterizations, the unique "binary DN-like" structure was proved to fit well with our initial theoretical assumption. Moreover, compared to other energy-dissipation models, this structural design showed a significant advantage regarding comprehensive properties. Therefore, we think this design philosophy would inspire the development of advanced strong tough hydrogel in the future.

Utilization of Nonradiative Excited-State Dissipation for Promoted Phototheranostics Based on an AIE-Active Type I ROS Generator.

As for effective multimodal phototheranostic AIEgens, it is important to find strategies for manipulating photophysical dissipation to achieve optimized performance. Herein, a "all-in-one" phototheranostic AIEgen, (E)-3-(2-(2-(5-(4-(diphenylamino)phenyl)thiophen-2-yl)vinyl)naphtho[1,2-d]thiazol-1-ium-1-yl)propane-1-sulfonate (NS-STPA) was constructed by a rigid coplanar grafting flexible rotor. NS-STPA nanoparticles (NPs) exhibited NIR fluorescent luminescence (FL) with φFL 2.78%. Upon 660 nm irradiation, the high photothermal conversion efficiency (39.01%) and effective reactive oxygen species (ROS) generation (5.28 times to Ce6) indicated the nonradiative decays are valuable in phototherapy. High •OH outputs showed NS-STPA NPs were outstanding type I ROS generators. The twisted D-A structure induced a large spin-orbit coupling (SOC), and insertion of thiophene decreased the S1-T1 energy gap (ΔEST). The nanoaggregate prolonged the triplet-state lifetime (τT). These all facilitate the intersystem crossing (ISC) for NS-STPA NPs. The photoinduced electron transfer resulted in •O2- and then •OH generation. In vivo evaluation indicated the promising application of NS-STPA NPs in FL and photothermal dual imaging-guided synergistic photodynamic and photothermal therapies.

Acid-improved DNAzyme-based chemiluminescence miRNA assay coupled with enzyme-free concatenated DNA circuit.

DNAzyme-based chemiluminescence assay exhibits excellent performance in bioanalysis but their operation in acid conditions remains challengeable. Herein, we constructed an acid-improved DNAzyme-based isothermal enzyme-free concatenated DNA circuit with significantly reduced background and simultaneously improved signal-to-noise ratio for miRNA detection. The chemiluminescence miRNA assay is composed of catalyzed hairpin assembly (CHA), hybridization chain reaction (HCR), and hemin/G-quadruplex DNAzyme units. The analyte initiates the self-assembly of CHA hairpins into numerous dsDNA, which triggers the subsequent autonomous cross-opening of HCR hairpins to generate long nanowires consisting of the hemin/G-quadruplex DNAzyme. The DNAzyme catalyzes the oxidation of luminol by hydrogen peroxide for the cascaded amplified chemiluminescence signal. The acid-improved property was demonstrated to be closely associated with the low catalytic activity of aggregated hemin under acidic conditions and the remained multiple amplified signal through concatenated DNA circuit. The general DNA circuit exhibited high sensitivity for miRNA-21 detection and chemiluminescence imaging under acidic conditions with a recognition hairpin. The acid-improved DNAzyme-based concatenated DNA circuit is promising to expand the application of chemiluminescence assay and provide a valuable strategy for early diagnosis and prognosis of cancer.

Intelligent Tumor Microenvironment-Activated Multifunctional Nanoplatform Coupled with Turn-on and Always-on Fluorescence Probes for Imaging-Guided Cancer Treatment.

Intrinsic tumor microenvironment (TME)-related therapeutic resistance and nontumor-specific imaging have limited the application of imaging-guided cancer therapy. Herein, a TME-responsive MnO2-based nanoplatform coupled with turn-on and always-on fluorescence probes was designed through a facile biomineralization method for imaging-guided photodynamic/chemodynamic/photothermal therapy (PDT/CDT/PTT). After the tumor-targeting delivery of the AuNCs@MnO2-ICG@AS1411 (AMIT) nanoplatform via aptamer AS1411, the TME-responsive dissociation of MnO2 generated sufficient O2 and Mn2+ with the consumption of GSH for improving PDT efficacy and Fenton-like reaction-mediated CDT. Simultaneously, the released small-sized ICG and AuNCs facilitated PDT and PTT efficacy via the deep tumor penetration. Moreover, the turn-on fluorescence of AuNCs revealed the real-time TME-responsive MnO2 degradation process, and the always-on ICG fluorescence enabled the in situ monitoring of the payload distribution in vitro and in vivo. The AMIT NPs also provided magnetic resonance and thermal imaging guidance for the enhanced PDT, CDT, and PTT. Therefore, this all-in-one nanosystem provides a simple and versatile strategy for multiple imaging-guided theranostic applications.

Effect of chronic intermittent hypobaric hypoxia on α(1)-adrenergic receptor of myocardium participates in the cardioprotection.

The purpose of the present study was to investigate the effect of chronic intermittent hypobaric hypoxia (CIHH) on α(1)-adrenergic receptors and the role of alpha(1)-adrenergic receptors in the protection of CIHH against ischemic injury of myocardium. Sixty-six adult male Sprague-Dawley rats were randomly divided into four groups: control group (Con), 14-day CIHH treatment group (CIHH14), 28-day CIHH treatment group (CIHH28) and 42-day CIHH treatment group (CIHH42). CIHH rats were exposed to hypoxia mimicking 5 000 m altitude (p(B)=404 mmHg, p(O(2))=84 mmHg) in a hypobaric chamber, 6 h daily for 14, 28 and 42 d, respectively. Control animals lived in the same environment as CIHH animals except hypoxia exposure. After anesthesia with sodium pentobarbital (3.0-3.5 mL/kg body weight, i.p.), papillary muscle was taken from the right ventricle of rat and perfused with modified Tyrode's solution continuously, at constant temperature (37 °C) and perfusion speed (12 mL/min). Muscle contraction was evoked by electric stimuli. Different concentrations (1x10(-7), 1x10(-6) and 1x10(-5) mol/L) of phenylephrine (PE), an alpha(1)-adrenergic receptor agonist, were applied cumulatively to investigate the effect of PE on the mechanic contraction of right ventricular papillary muscles of rats in Con, CIHH14, CIHH28 and CIHH42 groups. Also, prazosin (1x10(-6) mol/L), an α(1)-adrenergic receptor antagonist, was used to investigate the role of α(1)-adrenergic receptor in the protective effect of CIHH on papillary muscle. The results showed: (1) PE increased the maximal isometric tension (P(max)) and maximal velocity of tension development (P(dT/dt)) of muscle contraction in a dose-dependent manner (P<0.05), and the increase of the muscle contraction was much greater in CIHH28 and CIHH42 rats than that in Con rats (P<0.05). Under 1x10(-5) mol/L of PE, the increases of P(max) and P(dT/dt) over the baseline were 51.2% and 44.5% in CIHH28 group, 48.6% and 44.5% in CIHH42 group, and 28.7% and 24.5% in Con group, respectively; (2) The contraction of papillary muscle decreased during simulated ischemia, but the decrease was slighter in CIHH rats than that in Con rats (P<0.05). The decreases in P(max) and P(dT/dt) were 59.6% and 53.6% in CIHH28 group, 60.4% and 49.9% in CIHH42 group, and 74.4% and 64.7% in Con group, respectively; (3) The protective effect of CIHH on ischemic papillary muscle was abolished by prazosin (1x10(-6) mol/L). The results of the present study suggest that CIHH increases the activity of α(1)-adrenergic receptor, which is possibly one of the mechanisms for the cardioprotection of CIHH.