Fluorine-Free Superhydrophobic Covalent-Organic-Polymer Nanosheet Coating for Selective Dye and Emulsion Separation.

Covalent organic polymer nanosheets (COPNs) endowed with porous networks and large surface areas in their structures offer great advantages over other materials in addressing environmental problems. In this study, fluorine-free superhydrophobic COPNs were designed and applied to selective dye absorption. Notably, COPNs selectively adsorb dyes with a high hydrophobic index (HI) and reject low HI dyes with maximum adsorption capacities of 361 and 263 mg/g for crystal violet and methylene blue, respectively. The adsorption isotherm model showed that the COPNs follow the Langmuir adsorption isotherm model and pseudo-second-order kinetics. Next, we explored the superhydrophobicity of the COPNs by in situ fabrication with melamine sponge (COPNs-MS), which incorporates the superhydrophobicity of COPNs [water contact angle (WCA) of >150°] with the structure and flexibility of the MS skeleton. The COPNs-MS shows various oil-adsorbing properties with good adsorption capacity (from 60 to 120 g/g) and also effectively separates various surfactant-stabilized emulsions with a separation efficiency of over 99%. The as-fabricated COPNs-MS retains its superhydrophobicity in various solvents and hazardous conditions (WCA ≥ 150°) and exhibits good flame retardancy and excellent compression properties with excellent antifouling property due to the superhydrophobic COPN coating. Furthermore, COPNs-MS also demonstrates excellent recyclability because the strong COPN coating in the MS skeleton retains its hydrophobicity. Therefore, our fluorine-free superhydrophobic COPNs are not only capable of selective dye adsorption but also exhibit very good oil adsorption and surfactant-stabilized emulsion separation performance.

PAMAM G4.5 dendrimers for targeted delivery of ferulic acid and paclitaxel to overcome P-glycoprotein-mediated multidrug resistance.

In this study, we prepared ferulic acid (FA) and paclitaxel (PTX) co-loaded polyamidoamine (PAMAM) dendrimers conjugated with arginyl-glycyl-aspartic acid (RGD) to overcome P-glycoprotein (P-gp)-mediated multidrug resistance (MDR). FA was released in greater extent (80%) from the outer layer of the dendrimers compared with PTX (70%) from the interior of the dendrimers. FA improved intracellular availability of PTX via P-gp modulation in drug-resistant cells. In vitro drug uptake data show higher PTX delivery with RGD-PAMAM-FP than with PAMAM-FP in drug resistant KB CH-R 8-5 cell lines. This indicates that RGD facilitates intracellular PTX accumulation through active targeting in multidrug-resistant KB CH-R 8-5 cells. The terminal deoxynucleotidyl transferase 2'-deoxyuridine 5'-triphosphate nick-end labeling assay data and membrane potential analysis in mitochondria confirm the enhanced anticancer potential of RGD-PAMAM-FP nanoaggregates in drug-resistant cells. We also confirmed by the increased protein levels of proapoptotic factors such as caspase 3, caspase 9, p53, and Bax after treatment with RGD-PAMAM-FP nanoaggregates and also downregulates antiapoptotic factors. Hence, FA-PTX co-loaded, RGD-functionalized PAMAM G4.5 dendrimers may be considered as an effective therapeutic strategy to induce apoptosis in P-gp-overexpressing, multidrug-resistant cells.

Fabrication of Hydrogel Materials for Biomedical Applications.

Hydrogels are three-dimensional hydrophilic polymeric networks that can be made from a wide range of natural and synthetic polymers. This review discusses recent advanced engineering methods to fabricate hydrogels for biomedical applications with emphasis in cardiac constructs and wound healing. Layer-by-Layer (LbL) assembly offers a tissue-engineered construct with robust and highly ordered structures for cell proliferation and differentiation. Three-dimensional printings, including inkjet printing, fused deposition modeling, and stereolithographic apparatus, have been widely employed to fabricate complex structures (e.g., heart valves). Moreover, the state-of-the-art design of intelligent/stimulus-responsive hydrogels can be used for a wide range of biomedical applications, including drug delivery, glucose delivery, shape memory, wound dressings, and so on. In the future, an increasing number of hydrogels with tunable mechanical properties and versatile functions will be developed for biomedical applications by employing advanced engineering techniques with novel material design.

Preparation and characterization of ferulic acid-modified water soluble chitosan and poly (γ-glutamic acid) polyelectrolyte films through layer-by-layer assembly towards protein adsorption.

In this study, ferulic acid-modified water soluble chitosan and poly (γ-glutamic acid) polyelectrolyte multilayers films were constructed through the layer-by-layer (LBL) self-assembly technique. Chitosan (CS) or ferulic acid modified chitosan (MCS) and Poly (γ-glutamic acid) (PGA) was alternately deposited on the surface of glass substrate for the enhancement of surface modification. The obtained films were characterized by Fourier transform spectroscopy (FTIR), X-ray diffractometry (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), UV-vis spectroscopy and water contact angle to study its physico-chemical properties including protein absorption. The (PGA/MCS) films showed intense deposition of multilayers built upon the surface roughness and an increase in the exponential growth of multilayer films by UV-vis spectroscopy. Water contact angle indicated that the (PGA/MCS) films performed well with good wettability due to the increase in the number of layers. The LBL multilayer coatings of (PGA/MCS) films surface possessed a reduced amount of protein adsorption. These results indicated that it can resist the protein adsorption and can enhance the biocompatibility towards the biomedical application through the protein interaction. The (PGA/MCS) films has the potential to utilization as a good biomaterial for biomedical purposes to intensify the bio-active surface.

Water-induced shape memory behavior of poly (vinyl alcohol) and p-coumaric acid-modified water-soluble chitosan blended membrane.

Shape memory polymer (SMP), composites and blends need to be prepared to improve the properties or obtain new functions of SMPs. In this work, we successfully prepared p-coumaric acid-modified water-soluble chitosan (M-Cs) and poly (vinyl alcohol) blended membrane (PVA/M-Cs) by a simple solution casting method to enhance its physico-chemical properties, including water-induced shape memory behavior. M-Cs were synthesized from native chitosan (Cs) using carbodiimide chemistry. After the addition of M-Cs into the PVA polymer matrix, it exhibited better water-induced shape memory behavior and shape recovery ratio reach nearly 100 %. Moreover, the water contact angle value declined after the addition of Cs or M-Cs in to the PVA polymer matrix. Based on these findings, the respective blended membranes will be able to broaden the applications of SMPs in many sectors, especially in the biomedical field, which requires water as the main stimulus.

Isolation, process optimisation and characterisation of the protein from the de-oiled cake flour of Madhuca latifolia.

This work reports the isolation of the protein from the flour of an underutilised agro waste, a de-oiled cake of Madhuca latifolia using the bis (2-ethylehexyl) sodium sulfosuccinate salt reverse micelle and the characterisation of the protein through various techniques. The experimental conditions for the extraction were optimised using Box-Behnken design. The highest yield of the protein was achieved when the extraction parameters, i.e. KCl concentration, KCl amount, and pH of the medium, were 0.5 M, 1.25 ml, and 9.02, respectively. The experimental yield (75.56%) obtained under the optimised conditions matched extremely well with the predicted yield (75.19%). The analysis of the biochemical composition envisaged the occurrence of 2S albumin, 7S globulin, and 11S globulin as the major components in the protein. The X-ray diffraction pattern supported the ß-sheets structure of the protein. The imaging of the protein through a scanning electron microscope revealed the shape and surface of the protein to be spherical and smooth, respectively. Thus, the protein isolate of the de-oiled cake flour of Madhuca latifolia could be utilised towards food product development and relevant fields.

Amino acid-modified PAMAM dendritic nanocarriers as effective chemotherapeutic drug vehicles in cancer treatment: a study using zebrafish as a cancer model.

The use of nanomaterials for drug delivery offers many advantages including the targeted delivery of drugs and their controlled release. Nonetheless, entry into the target cells remains a challenge for many nanomaterials used for drug delivery. Moreover, cellular uptake limits the therapeutic efficiency of many anticancer drugs. An important goal is to increase the specific accumulation of these nanoparticles (NPs) at the desired cancerous tissues. Notably, cancer cells show a high demand for some amino acids and we have used this knowledge to develop novel carrier systems. In this study, drug carriers were produced by the conjugation of multiple amino acids such as l-histidine (H) and l-cysteine (C) or single amino acids such as only H with the G4.5 dendrimers (G) to produce GHC aggregates and GH NP carriers, respectively. Doxorubicin was loaded into the G4.5, GH, and GHC dendrimers (G/DOX, GH/DOX and GHC/DOX, respectively) and the release mechanism was demonstrated at pH 7.4 and pH 5.0. GH/DOX and GHC/DOX showed better stability under physiological conditions than the dendrimer alone (G/DOX). GH/DOX and GHC/DOX exhibited higher inhibition of HeLa cell proliferation in in vitro and in vivo studies in zebrafish, confirming the early release of DOX by disrupting the endosomal membrane and triggering the destabilization of carriers at a lower pH of 5.0.

Generation of universal and hypoimmunogenic human pluripotent stem cells.

There is a need to store very large numbers of conventional human pluripotent stem cell (hPSC) lines for their off-the-shelf usage in stem cell therapy. Therefore, it is valuable to generate "universal" or "hypoimmunogenic" hPSCs with gene-editing technology by knocking out or in immune-related genes. A few universal or hypoimmunogenic hPSC lines should be enough to store for their off-the-shelf usage. Here, we overview and discuss how to prepare universal or hypoimmunogenic hPSCs and their disadvantages. ß2-Microglobulin-knockout hPSCs did not harbour human leukocyte antigen (HLA)-expressing class I cells but rather activated natural killer (NK) cells. To avoid NK cell and macrophage activities, homozygous hPSCs expressing a single allele of an HLA class I molecule, such as HLA-C, were developed. Major HLA class I molecules were knocked out, and PD-L1, HLA-G and CD47 were knocked in hPSCs using CRISPR/Cas9 gene editing. These cells escaped activation of not only T cells but also NK cells and macrophages, generating universal hPSCs.

Biodegradable polymer-nanoclay composites as intestinal sleeve implants installed in digestive tract for obesity and type 2 diabetes treatment.

Obesity and type 2 diabetes have become serious health problems in 21st century. Development of non-invasive treatment to treat obesity and type-2 diabetes is still unmet needs. For targeting on this, one of the promising treatments is to implant an intestine sleeve in the gastrointestinal tract for limitation of food absorption. In this context, biodegradable polymer intestine sleeve was composed of polycaprolactone (PCL), poly-DL-lactic acid (PDLLA) and disk-shape nano-clay (Laponite®), and fabricated as an implantable device. Here, Laponite® as a rheological additive to improve the compatibility of PCL and PDLLA, and the polymers/clay composites were also evaluated by scanning electron microscopy SEM analysis and mechanical measurements. The mass ratio 90/10/1 of PCL/PDLLA/Laponite® composite was selected for fabrication of intestine sleeve, because of the highest toughness and flexibility, which are tensile strength of 91.9 N/mm2 and tensile strain of 448% at the failure point. The prepared intestine sleeve was implanted and deployed at the duodenum in type2 diabetic rats, providing significant benefits in control of the body weight and blood glucose, while compared with the non-implanted type 2 diabetic rats. More importantly, the food intake records and histopathological section reports presented that the implanted rats still have normal appetites and no noticeable acute symptoms of inflammation in the end of the test. These appreciable performances suggested the implantation of biocompatible polymer composites has a highly potential treatment for obesity and type 2 diabetes.

Ibuprofen-Loaded Heparin Modified Thermosensitive Hydrogel for Inhibiting Excessive Inflammation and Promoting Wound Healing.

Hydrogels have been investigated as ideal biomaterials for wound treatment owing to their ability to form a highly moist environment which accelerates cell migration and tissue regeneration for prompt wound healing. They can also be used as a drug carrier for local delivery, and are able to activate immune cells to enhance wound healing. Here, we developed heparin-conjugated poly(N-isopropylacrylamide), an injectable, in situ gel-forming polymer, and evaluated its use in wound healing. Ibuprofen was encapsulated into the hydrogel to help reduce pain and excessive inflammation during healing. In addition to in vitro studies, a BALB/c mice model was used to evaluate its effect on would healing and the secretion of inflammatory mediators. The in vitro assay confirmed that the ibuprofen released from the hydrogel dramatically reduced lipopolysaccharide-induced inflammation by suppressing the production of NO, PGE2 and TNF-α in RAW264.7 macrophages. Moreover, an in vivo wound healing assay was conducted by applying hydrogels to wounds on the backs of mice. The results showed that the ibuprofen-loaded hydrogel improved healing relative to the phosphate buffered saline group. This study indicates that ibuprofen loaded in an injectable hydrogel is a promising candidate for wound healing therapy.

Bioinspired Composite, pH-Responsive Sodium Deoxycholate Hydrogel and Generation 4.5 Poly(amidoamine) Dendrimer Improves Cancer Treatment Efficacy via Doxorubicin and Resveratrol Co-Delivery.

Maximizing the antitumor efficacy of doxorubicin (DOX) with a new drug delivery strategy is always desired in the field of biomedical science. Because the clinical applications of DOX in the treatment of cancer is limited by the side effects related to the dose. Herein, we report the co-loading of DOX and resveratrol (RESV) using an injectable in situ formed sodium deoxycholate hydrogel (Na-DOC-hyd) at the pH of the tumor extracellular microenvironment. The sequential, controlled, and sustained release of RESV and DOX for synergistic antitumor effects was confirmed by entrapping G4.5-DOX in the RESV-loaded Na-DOC hydrogel (Na-DOC-hyd-RESV). The synergistic antitumor activity of Na-DOC-hyd-RESV+G4.5-DOX was assessed on HeLa cell xenograft tumor in BALB/c nude mice. In the MTT biocompatibility assay, both the G4.5 PAMAM dendrimer and Na-DOC-hyd exhibited negligible cytotoxicity up to the highest dose of 2.0 mg mL-1 in HeLa, MDA-MB-231, and HaCaT cells. The release profiles of DOX and RESV from the Na-DOC-hyd-RESV+G4.5-DOX confirmed the relatively rapid release of RESV (70.43 ± 1.39%), followed by that of DOX (54.58 ± 0.62%) at pH 6.5 in the 7 days of drug release studies. A single intratumoral injection of Na-DOC-hyd-RESV+G4.5-DOX maximally suppressed tumor growth during the 28 days of the treatment period. Na-DOC-hyd-RESV+G4.5-DOX did not cause any histological damage in the major visceral organs. Therefore, this Na-DOC-hydrogel for dual drugs (DOX and RESV) delivery at the pH of the tumor extracellular microenvironment is a promising, safe, and effective combination for antitumor chemotherapy.

Enrichment of cancer-initiating cells from colon cancer cells through porous polymeric membranes by a membrane filtration method.

Cancer-initiating cells (CICs) or cancer stem cells (CSCs) are primarily responsible for tumor initiation, growth, and metastasis and represent a few percent of the total tumor cell population. We designed a membrane filtration protocol to enrich CICs (CSCs) from the LoVo colon cancer cell line via nylon mesh filter membranes with 11 and 20 µm pore sizes and poly(lactide-co-glycolic acid)/silk screen (PLGA/silk screen) porous membranes (pore sizes of 20-30 µm). The colon cancer cell solution was filtered through the membranes to obtain a permeate solution. Subsequently, the cell culture medium was filtered through the membranes to collect the recovery solution where the cells attached to the membranes were rinsed off into the recovery solution. Then, the membranes were cultivated in the cultivation medium to collect the migrated cells from the membranes. The cells migrated from any membrane had higher expression of the CSC surface markers CD44 and CD133, had higher colony formation levels, and produced more carcinoembryonic antigen (CEA) than the colon cancer cells cultivated on conventional tissue culture plates (control). We established a method to enrich the CICs (CSCs) of colon cancer cells from migrated cells through porous polymeric membranes by the membrane filtration protocol developed in this study.

Modification of different molecular weights of chitosan by p-Coumaric acid: Preparation, characterization and effect of molecular weight on its water solubility and antioxidant property.

In this study, we modified three different molecular weights of chitosan by using p-Coumaric acid (p-CA) for enhancing their water solubility and antioxidant property. The chemical and physical properties of all native chitosan and its modified products were determined by Fourier transform spectroscopy (FTIR), ninhydrin assay, Folin-Ciocalteu reagent procedure, thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), high performance of liquid chromatography (HPLC), X-ray diffraction (XRD), water solubility and antioxidant property (both DPPH assay and reducing power assay). Results showed that the water solubility and antioxidant property of modified product decreases, when molecular weight of corresponding native chitosan increases. The obtained modified product had good solubility over a wide range of pH. Thermal analysis (TGA and DSC) showed the lower thermal stability of the modified product than that of corresponding native chitosan. XRD pattern revealed that the crystallinity was less in modified product than that of respective chitosan. The enhanced partially water solubility and antioxidant property of all modified chitosan products might be a great advantage, while applied in a wide range of applications in the form antioxidant property in food, biomedical and cosmetic industry.

Encapsulation of gadolinium ferrite nanoparticle in generation 4.5 poly(amidoamine) dendrimer for cancer theranostics applications using low frequency alternating magnetic field.

Iron oxide-based magnetic resonance imaging (MRI) contrast agents have negative contrast limitations in cancer diagnosis. Gadolinium (Gd)-based contrast agents show toxicity. To overcome these limitations, Gd-doped ferrite (Gd:Fe3O4 (GdIO) nanoparticles (NPs) were synthesized as T1-T2 dual-modal contrast agents for MRI-traced drug delivery. A theranostics GdIO encapsulated in a Generation 4.5 PAMAM dendrimer (G4.5-GdIO) was developed by alkaline coprecipitation. The drug-loading efficiency of the NPs was ∼24%. In the presence of a low-frequency alternating magnetic field (LFAMF), a maximum cumulative doxorubicin (DOX) release of ∼77.47% was achieved in a mildly acidic (pH = 5.0) simulated endosomal microenvironment. Relaxometric measurements indicated superior r1 (5.19 mM-1s-1) and r2 (26.13 mM-1s-1) for G4.5-GdIO relative to commercially available Gd-DTPA. Thus, G4.5-GdIO is promising as an alternative noninvasive MRI-traced cancer drug delivery system.

Modification of HTPB-based polyurethane with temperature-sensitive poly(N-isopropyl acrylamide) for biomaterial usage.

Hydroxyl-terminated polybutadiene (HTPB)-based polyurethane with dimethyol propionic acid (DPA) as chain extender was synthesized by solution polymerization. The HTPB-based polyurethane was modified by UV radiation with N-isopropyl acrylamide monomer to get poly(N-isopropyl acrylamide)-modified polyurethane (PUDPANIPAAm). The cohesive energy (E(coh)), molar volume (V), solubility parameter (delta), molecular weight (W(M)), volume per gram (V(g)), and the density (1/V(g)) of PUDPANIPAAm were calculated by group contribution methods. To evaluate the application of PUDPANIPAAm for wound dressing and transplantation of cell sheet, the measurement of water content, water vapor transmission rate, and gas permeation on the PUDPANIPAAm membrane was evaluated. The biocompatibility of these membranes, cell adhesion, and proliferation assay were conducted in the cell culture. The effect of thermosensitivity of poly(N-isopropyl acrylamide) on cell detachment was also evaluated in the primary study. The results showed that these PUDPANIPAAm membranes are thermosensitive. The modification of PU with poly(N-isopropyl acrylamide) reduced the water vapor transmission rate and permeability of gas through PUDPANIPAAm membrane. PUDPANIPAAm membranes could support cell adhesion and growth. Owing to the thermosensitive nature of poly(N-isopropyl acrylamide), the relative cell numbers detached from PUDPANIPAAm membranes were larger than those detached from the polystyrene dish.

Chitosan/poly(vinyl alcohol) blending hydrogel coating improves the surface characteristics of segmented polyurethane urethral catheters.

Segmented polyurethane (SPU) is commonly used to manufacture urethral catheters. Surface modifications for SPU catheters are needed to reduce friction and protein adsorption, in order to minimize catheter-related complications, including urethral trauma, encrustation, catheter obstruction, bacterial colonization, and infection. In this study, a four-step surface modification method was developed to create a thin lubricious layer of chitosan/poly(vinyl alcohol) (PVA) hydrogel on the SPU catheter. Modification steps included oxidation of the SPU surface, functionalities modification, carbodiimide reaction and coupling, and hydrogel crosslinking. The success of each modification step was confirmed by Fourier transform infrared spectroscopy. Measurement of the water contact angle revealed that hydrogel coating created a highly hydrophilic surface and atomic force microscope analyses demonstrated that the surface was slippery. Protein absorption of the SPU catheter was significantly reduced by coating hydrogel. Chitosan in the hydrogel could provide antimicrobial activity, and the hydrogel coating SPU samples showed significant antibacterial effects in this study. In summary, the four-step modification method developed in this study provided a simple and effective way to coat the surface of SPU catheters with a chitosan/PVA blending hydrogel that could help to minimize the risk of complications related to the use of urethral catheters.

Protein adsorption on polyanion/polycation layer-by-layer assembled polyelectrolyte films.

As layer-by-layer self-assembly deposition (LbL) is a versatile technique for surface modification, protein adsorption on the LbL modified glass is evaluated in this study. At the beginning, glass slides was silanized by 3-aminopropyltriethoxysilane (APTES). Sodium alginate (Alg), poly(γ-glutamic acid) (PGA) and poly(aspartic acid) (PAsp) were selected as polyanion electrolytes and chitosan (CS) was used as the polycation electrolyte. Both polyanion and polycation electrolytes alternately deposited on the silanized glass slide surface by the LbL technique to get three different polyanion/chitosan series of LbL films ([Alg/CS], [PGA/CS], and [PAsp/CS]). Three kinds of kinetic model including pseudo-first-order, second-order kinetic and intraparticle diffusion model were used to evaluate the adsorption of albumin on the three different polyanion/chitosan series of LbL films. It is found that the adsorption of albumin on the polyanion/chitosan series of LbL films can be described well with the pseudo-second-order kinetic mechanism. To make sure if the pseudo-second-order kinetic mechanism of protein adsorbed on the other polyanion/polycation LbL films is also suitable, poly(allylamine hydrochloride) (PAH) and poly(L-lysine) (PLL) are used as two other polycations. The [polyanion/PAH] and [polyanion/PLL] series of LbL films were prepared with the same LbL technique for albumin, fibrinogen, and fibronectin adsorption. From the results, it is found that albumin, fibrinogen, and fibronectin adsorption on the various polyanion/polycation LbL films can be described well with the pseudo-second-order kinetic mechanism. The protein adsorbed at equilibrium and rate constant of protein adsorbed on the various LbL films can be determined.

A quantitative cell modeling and wound-healing analysis based on the Electric Cell-substrate Impedance Sensing (ECIS) method.

In this paper, a quantitative modeling and wound-healing analysis of fibroblast and human keratinocyte cells is presented. Our study was conducted using a continuous cellular impedance monitoring technique, dubbed Electric Cell-substrate Impedance Sensing (ECIS). In fact, we have constructed a mathematical model for quantitatively analyzing the cultured cell growth using the time series data directly derived by ECIS in a previous work. In this study, the applicability of our model into the keratinocyte cell growth modeling analysis was assessed first. In addition, an electrical "wound-healing" assay was used as a means to evaluate the healing process of keratinocyte cells at a variety of pressures. Two innovative and new-defined indicators, dubbed cell power and cell electroactivity, respectively, were developed for quantitatively characterizing the biophysical behavior of cells. We then employed the wavelet transform method to perform a multi-scale analysis so the cell power and cell electroactivity across multiple observational time scales may be captured. Numerical results indicated that our model can well fit the data measured from the keratinocyte cell culture for cell growth modeling analysis. Also, the results produced by our quantitative analysis showed that the wound healing process was the fastest at the negative pressure of 125mmHg, which consistently agreed with the qualitative analysis results reported in previous works.

Cell proliferation on PVA/sodium alginate and PVA/poly(γ-glutamic acid) electrospun fiber.

To overcome the obstacles of easy dissolution of PVA nanofibers without crosslinking treatment and the poor electrospinnability of the PVA cross-linked nanofibers via electrospinning process, the PVA based electrospun hydrogel nanofibers are prepared with post-crosslinking method. To expect the electrospun hydrogel fibers might be a promising scaffold for cell culture and tissue engineering applications, the evaluation of cell proliferation on the post-crosslinking electrospun fibers is conducted in this study. At beginning, poly(vinyl alcohol) (PVA), PVA/sodium alginate (PVASA) and PVA/poly(γ-glutamic acid) (PVAPGA) electrospun fibers were prepared by electrospinning method. The electrospun PVA, PVASA and PVAPGA nanofibers were treated with post-cross-linking method with glutaraldehyde (Glu) as crosslinking agent. These electrospun fibers were characterized with thermogravimetry analysis (TGA) and their morphologies were observed with a scanning electron microscope (SEM). To support the evaluation and explanation of cell growth on the fiber, the study of 3T3 mouse fibroblast cell growth on the surface of pure PVA, SA, and PGA thin films is conducted. The proliferation of 3T3 on the electrospun fiber surface of PVA, PVASA, and PVAPGA was evaluated by seeding 3T3 fibroblast cells on these crosslinked electrospun fibers. The cell viability on electrospun fibers was conducted with water-soluble tetrazolium salt-1 assay (Cell Proliferation Reagent WST-1). The morphology of the cells on the fibers was also observed with SEM. The results of WST-1 assay revealed that 3T3 cells cultured on different electrospun fibers had similar viability, and the cell viability increased with time for all electrospun fibers. From the morphology of the cells on electrospun fibers, it is found that 3T3 cells attached on all electrospun fiber after 1day seeded. Cell-cell communication was noticed on day 3 for all electrospun fibers. Extracellular matrix (ECM) productions were found and cell-ECM adhesion was shown on day 7. The cell number was also increased on all of the crosslinked electrospun fibers. It seems that the PVA based electrospun hydrogel nanofibers prepared with post-crosslinking method can be used as scaffold for tissue engineering.

Characterization of chemisorbed hyaluronic acid directly immobilized on solid substrates.

Hyaluronic acid (HA) has a number of potential biomedical applications in drug delivery and tissue engineering. For these applications, a prerequisite is to understand the characteristic of HA films directly immobilized to solid substrates. Here, we demonstrate that high molecular weight HA can be directly immobilized onto hydrophilic substrates without any chemical manipulation, allowing for the formation of an ultrathin chemisorbed layer. Hyaluronic acid is stabilized on these surfaces through hydrogen bonding between the hydrophilic moieties in HA [such as carboxylic acid (-COOH) or hydroxyl (-OH) groups] with silanol (-SiOH), carboxylic acid or hydroxyl groups on the hydrophilic substrates. Despite the water solubility, the chemisorbed HA layer remained stable on glass or silicon oxide substrates for at least 7 days in phosphate-buffered saline. Furthermore, HA immobilized on silicon and other dioxide surfaces in much higher quantities than other polysaccharides including dextran sulfate, heparin, heparin sulfate, chondroitin sulfate, dermatan sulfate, and alginic acid. This behavior is related to the molecular entanglement and intrinsic stiffness of HA as a result of strong internal and external hydrogen bonding as well as high molecular weight. These results demonstrate that HA can be used to coat surfaces through direct immobilization.