A systematic review of radiomics in chondrosarcoma: assessment of study quality and clinical value needs handy tools.

OBJECTIVE: To evaluate the study quality and clinical value of radiomics studies on chondrosarcoma. METHODS: PubMed, Embase, Web of Science, China National Knowledge Infrastructure, and Wanfang Data were searched for articles on radiomics for evaluating chondrosarcoma as of January 31, 2022. The study quality was assessed according to Radiomics Quality Score (RQS), Transparent Reporting of a multivariable prediction model for Individual Prognosis Or Diagnosis (TRIPOD) checklist, Image Biomarker Standardization Initiative (IBSI) guideline, and modified Quality Assessment of Diagnostic Accuracy Studies (QUADAS-2) tool. The level of evidence supporting clinical use of radiomics on chondrosarcoma differential diagnosis was determined based on meta-analyses. RESULTS: Twelve articles were included. The median RQS was 10.5 (range, -3 to 15), with an adherence rate of 36%. The adherence rate was extremely low in domains of high-level evidence (0%), open science and data (17%), and imaging and segmentation (35%). The adherence rate of the TRIPOD checklist was 61%, and low for section of title and abstract (13%), introduction (42%), and results (56%). The reporting rate of pre-processing steps according to the IBSI guideline was 60%. The risk of bias and concern of application were mainly related to the index test. The meta-analysis on differential diagnosis of enchondromas vs. chondrosarcomas showed a diagnostic odds ratio of 43.90 (95% confidential interval, 25.33-76.10), which was rated as weak evidence. CONCLUSIONS: The current scientific and reporting quality of radiomics studies on chondrosarcoma was insufficient. Radiomics has potential in facilitating the optimization of operation decision-making in chondrosarcoma. KEY POINTS: • Among radiomics studies on chondrosarcoma, although differential diagnostic models showed promising performance, only pieces of weak level of evidence were reached with insufficient study quality. • Since the RQS rating, the TRIPOD checklist, and the IBSI guideline have largely overlapped with each other, it is necessary to establish one widely acceptable methodological and reporting guideline for radiomics research. • The TRIPOD model typing, the phase classification of image mining studies, and the level of evidence category are useful tools to assess the gap between academic research and clinical application, although their modifications for radiomics studies are needed.

The endorsement of general and artificial intelligence reporting guidelines in radiological journals: a meta-research study.

BACKGROUND: Complete reporting is essential for clinical research. However, the endorsement of reporting guidelines in radiological journals is still unclear. Further, as a field extensively utilizing artificial intelligence (AI), the adoption of both general and AI reporting guidelines would be necessary for enhancing quality and transparency of radiological research. This study aims to investigate the endorsement of general reporting guidelines and those for AI applications in medical imaging in radiological journals, and explore associated journal characteristic variables. METHODS: This meta-research study screened journals from the Radiology, Nuclear Medicine & Medical Imaging category, Science Citation Index Expanded of the 2022 Journal Citation Reports, and excluded journals not publishing original research, in non-English languages, and instructions for authors unavailable. The endorsement of fifteen general reporting guidelines and ten AI reporting guidelines was rated using a five-level tool: "active strong", "active weak", "passive moderate", "passive weak", and "none". The association between endorsement and journal characteristic variables was evaluated by logistic regression analysis. RESULTS: We included 117 journals. The top-five endorsed reporting guidelines were CONSORT (Consolidated Standards of Reporting Trials, 58.1%, 68/117), PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses, 54.7%, 64/117), STROBE (STrengthening the Reporting of Observational Studies in Epidemiology, 51.3%, 60/117), STARD (Standards for Reporting of Diagnostic Accuracy, 50.4%, 59/117), and ARRIVE (Animal Research Reporting of In Vivo Experiments, 35.9%, 42/117). The most implemented AI reporting guideline was CLAIM (Checklist for Artificial Intelligence in Medical Imaging, 1.7%, 2/117), while other nine AI reporting guidelines were not mentioned. The Journal Impact Factor quartile and publisher were associated with endorsement of reporting guidelines in radiological journals. CONCLUSIONS: The general reporting guideline endorsement was suboptimal in radiological journals. The implementation of reporting guidelines for AI applications in medical imaging was extremely low. Their adoption should be strengthened to facilitate quality and transparency of radiological study reporting.

Machine Learning-Based Human Posture Identification from Point Cloud Data Acquisitioned by FMCW Millimetre-Wave Radar.

Human posture recognition technology is widely used in the fields of healthcare, human-computer interaction, and sports. The use of a Frequency-Modulated Continuous Wave (FMCW) millimetre-wave (MMW) radar sensor in measuring human posture characteristics data is of great significance because of its robust and strong recognition capabilities. This paper demonstrates how human posture characteristics data are measured, classified, and identified using FMCW techniques. First of all, the characteristics data of human posture is measured with the MMW radar sensors. Secondly, the point cloud data for human posture is generated, considering both the dynamic and static features of the reflected signal from the human body, which not only greatly reduces the environmental noise but also strengthens the reflection of the detected target. Lastly, six different machine learning models are applied for posture classification based on the generated point cloud data. To comparatively evaluate the proper model for point cloud data classification procedure-in addition to using the traditional index-the Kappa index was introduced to eliminate the effect due to the uncontrollable imbalance of the sampling data. These results support our conclusion that among the six machine learning algorithms implemented in this paper, the multi-layer perceptron (MLP) method is regarded as the most promising classifier.

The prevalence and parameters of fabella and its association with medial meniscal tear in China: a retrospective study of 1011 knees.

BACKGROUND: Fabella is a sesamoid bone of knee that has potential biomechanical function. We aimed to examine the fabellar prevalence and parameters in Chinese population and test the hypothesis that fabellar presence and morphology were associated with meniscus tear or ligament injury. METHODS: A total of 1011 knee magnetic resonance imaging scans from 979 patients with knee pain were analyzed retrospectively. The exclusion criteria are postsurgical scans, difficulty in fabella discrimination, conditions not suitable for measurement, and unsatisfied image. The fabellar presence and its parameters (length, width and thickness) were documented. The association between fabellar presence and meniscus tear or ligament injury were assessed by chi-square test, in all knees and subgroups (age, gender, side, lesion part). The correlation of fabellar presence and parameters with advancing age was assessed by Spearman correlation analysis. Odds ratios (ORs) and 95% confidence intervals (CIs) were calculated to investigate whether factors related with meniscus tear or ligament injury. Diagnostic performance of risk factors was assessed by receiver operating characteristic (ROC) analysis. RESULTS: The overall prevalence of fabellae was 39.8% (402/1011 knees) and increased with the increasing age (r = 0.237, P < 0.001). The size of the fabellae differed according to genders, age, and presence of articulating grooves. Fabella presented more often in knees with medial meniscus (MM) tears (66.7% vs 33.8%; P < 0.001) with a multivariate OR of 2.960 (95% CI, 1.853-3.903). The association remained in all tear parts (anterior, middle, and posterior), and in younger (age < 50 years) and older patients (age ≥ 50 years). Age, fabellar length, width, length/thickness ratio and width/thickness ratio yielded an area under the ROC curve (AUC) of 0.604-0.766 to predict an MM tear. In combination with age, fabellar width and length/thickness ratio, the AUC was improved 0.791 (95% CI, 0.744-0.837), with a sensitivity of 73.0% and a specificity of 74.6%. CONCLUSION: The presence of fabellae, increased fabellar length and width as well as flatter fabellar morphology, are significantly associated with an increased risk for MM tear. These findings might aid clinicians in identifying patients at risk for a MM tear and informing them.

The recombinant human fibroblast growth factor-18 (sprifermin) improves tendon-to-bone healing by promoting chondrogenesis in a rat rotator cuff repair model.

BACKGROUND: Rotator cuff healing is improved by reconstructing the fibrocartilaginous structure of the tendon-to-bone enthesis. Fibroblast growth factor (FGF)-18 (sprifermin) is a well-known growth factor that improves articular cartilage repair via its anabolic effect. This study aimed to investigate the effect of recombinant human FGF-18 (rhFGF-18) on the chondrogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs) in vitro and tendon-to-bone healing in a rat model of rotator cuff repair. METHODS: Histological and reverse transcription-quantitative real-time polymerase chain reaction analyses of chondral pellets cultured with different concentrations of rhFGF-18 were performed. Bilateral detachment and repair of the supraspinatus tendon were performed on rats. The rats were administered 0.2 mL of sodium alginate (SA) hydrogel with (rhFGF-18/SA group, n = 12) or without (SA group, n = 12) 20 µg of rhFGF-18 into the repaired side. The simple repair group (n = 12) served as a control. At 4 and 8 weeks after surgery, histological analysis and biomechanical tests were performed. RESULTS: After chondrogenesis induction, compared with the control group, 10 ng/mL of rhFGF-18 increased pellet volume significantly (P = .002), with improved histological staining. It was noted that 10 ng/mL of rhFGF-18 upregulated the mRNA expression (relative ratio to control) of aggrecan (2.59 ± 0.29, P < .001), SRY-box transcription factor 9 (1.88 ± 0.05, P < .001), and type II collagen (1.46 ± 0.18, P = .009). At 4 and 8 weeks after surgery, more fibrocartilage and cartilaginous extracellular matrix was observed in rhFGF-18/SA-treated rats. The semiquantitative data from picrosirius red staining test were 31.1 ± 4.5 vs. 61.2 ± 4.1 at 4 weeks (P < .001) and 61.5 ± 2.8 vs. 80.5 ± 10.5 at 8 weeks (P = .002) (control vs. rhFGF-18/SA). Ultimate failure load (25.42 ± 3.61 N vs. 18.87 ± 2.71 N at 4 weeks and 28.63 ± 5.22 N vs. 22.15 ± 3.11 N at 8 weeks; P = .006 and P = .03, respectively) and stiffness (18.49 ± 1.38 N/mm vs. 14.48 ± 2.01 N/mm at 8 weeks, P = .01) were higher in the rhFGF-18/SA group than in the control group. CONCLUSION: rhFGF-18 promoted chondrogenesis in the hBMSCs in vitro. rhFGF-18/SA improved tendon-to-bone healing in the rats by promoting regeneration of the fibrocartilage enthesis. rhFGF-18 (sprifermin) may be beneficial in improving tendon-to-bone healing after rotator cuff repair.

The comparison of clinical effect, knee function, prognosis of double plate fixation and locking plate internal fixation for tibial plateau fractures.

Objectives: The purpose of this study was to investigate the clinical effect, knee function improvement and prognosis of double plate internal fixation and locking plate internal fixation in the treatment of tibial plateau fractures. Methods: Clinical data from 96 tibial plateau fracture patients treated at our hospital were analyzed retrospectively. Of these, 46 had been treated using locking plate internal fixation and 50 were treated with double T-shaped plate fixation. Clinically related indices, Hospital for Special Surgery (HSS) score of knee function, and ability of daily living (ADL) score were evaluated during postoperative follow-up. Results: No significant differences were observed in pre-operative patient characteristics in both groups. Healing time, time to weight-bearing, tibial plateau angle (TPA) and lateral posterior angle (PA) were all superior in the locking plate fixation group compared to the double plate fixation group. At three months post-operative visit, range of motion, knee function, flexion deformity, muscle strength, pain, and stability metrics were all superior in the locking plate fixation group compared to the double plate fixation group. ADL scores were also higher in the locking plate fixation group than in the double plate fixation group at three and six months follow-up. Conclusions: The clinical effect, knee function improvement and prognosis of locking plate internal fixation in the treatment of tibial plateau fractures are better than those of double plate fixation.

The effect of platelet rich plasma combined with celecoxib on knee function and pain in patients with knee osteoarthritis.

Objectives: To analyze the immediate effect of platelet rich plasma, combined with celecoxib, on knee function and pain in patients with knee osteoarthritis. Methods: The clinical data of 86 patients with knee osteoarthritis, treated in our hospital from January 2019 to January 2021, were analyzed retrospectively. According to the treatment records, patients were divided into a control group (n = 43, celecoxib) and a treatment group (n = 43, platelet rich plasma + celecoxib). The knee function, pain and clinical effect in the two groups were compared and analyzed using the Hospital for Special Surgery (HSS) knee score and the visual analog scale (VAS). Results: The treatment group had a higher HSS score, and a lower VAS score compared to the control group (P<0.05). The clinical efficacy in the treatment group was higher than that in the control group (95.35% and 72.09% respectively, P<0.05). Conclusions: Platelet rich plasma combined with celecoxib can promote the recovery of knee function and reduce pain in patients with knee osteoarthritis. This treatment combination also has a high immediate clinical effectiveness but needs further evaluation to find out the long term effects.

Effects of high viscosity bone cement percutaneous vertebroplasty on pain, bone specific alkaline phosphatase, Type-I collage cross-linked-telopeptide and Boneglaprotein levels in patients with osteoporotic vertebral compression fractures.

Objectives: To investigate the effects of percutaneous vertebroplasty with high viscosity bone cement on pain and the levels of bone specific alkaline phosphatase (BALP), Type-I collagen cross-linked telopeptide (CTX) and serum osteocalcin (BGP) in patients with osteoporotic vertebral compression fractures. Methods: The medical records of patients with osteoporotic vertebral compression fractures treated in our hospital from February 2020 to February 2021 were selected after retrospective analysis. Patients (43) who received low viscosity bone cement percutaneous vertebroplasty comprised Group-I, and patients (56) who received high viscosity bone cement percutaneous vertebroplasty, comprised Group-II of the study. The occurrence of bone cement leakage, pain (VAS scores), BALP, CTX and BGP were compared and analyzed between the two groups. Results: The incidence of bone cement leakage in Group-II was 16.28%, lower than 3.57% in Group-I (P<0.05). The visual analogue scale (VAS) scores of patients in Group-II were lower than those in Group-I at one and three months after the surgery (P<0.05). The levels of BALP and BGP in Group-II were higher than those in Group-I three months after the surgery (P<0.05), and CTX was lower than those in Group-I (P<0.05). Conclusions: Percutaneous vertebroplasty with high viscosity bone cement in the treatment of osteoporotic vertebral compression fractures can reduce the incidence of bone cement leakage and help to further reduce pain and improve bone metabolism.

Amorphous calcium phosphate nanoparticles using adenosine triphosphate as an organic phosphorus source for promoting tendon-bone healing.

BACKGROUND: Rotator cuff tear (RCT) is a common problem of the musculoskeletal system. With the advantage of promoting bone formation, calcium phosphate materials have been widely used to augment tendon-bone healing. However, only enhancing bone regeneration may be not enough for improving tendon-bone healing. Angiogenesis is another fundamental factor required for tendon-bone healing. Therefore, it's necessary to develop a convenient and reliable method to promote osteogenesis and angiogenesis simultaneously, thereby effectively promoting tendon-bone healing. METHODS: The amorphous calcium phosphate (ACP) nanoparticles with dual biological activities of osteogenesis and angiogenesis were prepared by a simple low-temperature aqueous solution method using adenosine triphosphate (ATP) as an organic phosphorus source. The activities of osteogenesis and angiogenesis and the effect on the tendon-bone healing of ACP nanoparticles were tested in vitro and in a rat model of acute RCT. RESULTS: The ACP nanoparticles with a diameter of tens of nanometers were rich in bioactive adenosine. In vitro, we confirmed that ACP nanoparticles could enhance osteogenesis and angiogenesis. In vivo, radiological and histological evaluations demonstrated that ACP nanoparticles could enhance bone and blood vessels formation at the tendon-bone junction. Biomechanical testing showed that ACP nanoparticles improved the biomechanical strength of the tendon-bone junction and ultimately promoted tendon-bone healing of rotator cuff. CONCLUSIONS: We successfully confirmed that ACP nanoparticles could promote tendon-bone healing. ACP nanoparticles are a promising biological nanomaterial in augmenting tendon-bone healing.

Comprehensive mPoint: A Method for 3D Point Cloud Generation of Human Bodies Utilizing FMCW MIMO mm-Wave Radar.

In this paper, comprehensive mPoint, a method for generating 3D (range, azimuth, and elevation) point cloud of human targets using a Frequency-Modulated Continuous Wave (FMCW) signal and Multi-Input Multi-Output (MIMO) millimeter wave radar is proposed. Distinct from the TI-mPoint method proposed by TI technology, a comprehensive mPoint method considering both the static and dynamic characteristics of radar reflected signals is utilized to generate a high precision point cloud, resulting in more comprehensive information of the target being detected. The radar possessing 60-64 GHz FMCW signal with two sets of different dimensional antennas is utilized in order to experimentally verify the results of the methodology. By using the proposed process, the point cloud data of human targets can be obtained based on six different postures of the underlying human body. The human posture cube and point cloud accuracy rates are defined in the paper in order to quantitively and qualitatively evaluate the quality of the generated point cloud. Benefitting from the proposed comprehensive mPoint, evidence shows that the point number and the accuracy rate of the generated point cloud compared with those from the popular TI-mPoint can be largely increased by 86% and 42%, respectively. In addition, the noise level of multipath reflection can be effectively reduced. Moreover, the length of the algorithm running time is only 1.6% longer than that of the previous method as a slight tradeoff.

Cross-Linked Polyphosphazene Hollow Nanosphere-Derived N/P-Doped Porous Carbon with Single Nonprecious Metal Atoms for the Oxygen Reduction Reaction.

Heteroatom-doped polymers or carbon nanospheres have attracted broad research interest. However, rational synthesis of these nanospheres with controllable properties is still a great challenge. Herein, we develop a template-free approach to construct cross-linked polyphosphazene nanospheres with tunable hollow structures. As comonomers, hexachlorocyclotriphosphazene provides N and P atoms, tannic acid can coordinate with metal ions, and the replaceable third comonomer can endow the materials with various properties. After carbonization, N/P-doped mesoporous carbon nanospheres were obtained with small particle size (≈50 nm) and high surface area (411.60 m2 g-1 ). Structural characterization confirmed uniform dispersion of the single atom transition metal sites (i.e., Co-N2 P2 ) with N and P dual coordination. Electrochemical measurements and theoretical simulations revealed the oxygen reduction reaction performance. This work provides a solution for fabricating diverse heteroatom-containing polymer nanospheres and their derived single metal atom doped carbon catalysts.

Tissue-Engineered Trachea Consisting of Electrospun Patterned sc-PLA/GO- g-IL Fibrous Membranes with Antibacterial Property and 3D-Printed Skeletons with Elasticity.

In this study, a tissue-engineered trachea, consisting of multilevel structural electrospun polylactide (PLA) membranes enveloping 3D-printed thermoplastic polyurethane (TPU) skeletons, was developed to create a mechanically robust, antibacterial and bioresorbable graft for the tracheal reconstruction. The study design incorporated two distinct uses of stereocomplex PLA: patterned electrospun fibers to enhance tissue integration compared to the random layered fibers, meanwhile possessing good antibacterial property; and 3D-printed TPU scaffold with elasticity to provide external support and protection. Herein, ionic liquid (IL)-functioned graphene oxide (GO) was synthesized and presented enhanced mechanical and hydrophilicity properties. More interesting, antibacterial activity of the GO- g-IL modified PLA membranes were proved by Escherichia coli and Staphylococcus aureus, showing superior antibacterial effect compared to single GO or IL. The synergistic antibacterial effect could be related to that GO break cytomembrane of bacteria by its extremely sharp edges, while IL works by electrostatic interaction between its cationic structures and electronegative phosphate groups of bacteria membranes, leading to the loss of cell electrolyte and cell death. Hence, after L929 fibroblast cells were seeded on patterned fibrous membranes with phenotypic shape, further effective cell infiltration, cell proliferation and attachment were observed. In addition, the tissue-engineered trachea scaffolds were implanted into rabbit models. The in vivo result confirmed that the scaffolds with patterned membranes manifested favorable biocompatibility and promoted tissue regeneration.

[A case of nasal NK/T-cell lymphoma].

A 29-year-old male patient with extranodal NK/T-cell lymphoma, a nasal type lymphoma with involvement of skin as the first symptom, was reported. The patient presented with swelling in the left side of the nose and suffered intermittent fever for 1 month. The fester in the oral mucosa and skin under the left nostril and redness, and the swelling on the orbit of the left eye lasted for 1 week. Physical examination showed that the left side of nose was swelling, and the skin below the left nostril was anabrotic and crusted. There were different ulcers in his jaws and buccal mucosa. Bilateral eyelid was redness and swelling, especially in the left side. Binocular conjunctival was congestive. The diagnosis of extranodal NK/T-cell lymphoma (nasal type) was confirmed by biopsy and immunohistochemistry.

Phase 1b Trial to Evaluate Tissue Response to a Second Dose of Intravesical Recombinant Adenoviral Interferon α2b Formulated in Syn3 for Failures of Bacillus Calmette-Guerin (BCG) Therapy in Nonmuscle Invasive Bladder Cancer.

BACKGROUND: A phase 1b trial was conducted to evaluate the duration of interferon-alpha (IFNα) production after intravesical administration of recombinant adenovirus-mediated interferon α2b (Ad-IFN) formulated with the excipient Syn3. The primary aim was to determine whether a second instillation 3 days after initial treatment produced prolonged urinary IFN production. METHODS: The study enrolled seven patients who experienced recurrent non-muscle invasive bladder cancer after bacillus Calmette-Guerin therapy. Each treatment consisted of intravesical instillation of SCH721015 (Syn3) and Ad-IFN at a concentration of 3 × 1011 particles/mL to a total volume of 75 mL given on days 1 and 4. The patients were followed for 12 weeks, during which the magnitude and duration of gene transfer were determined by urine INFα levels. Drug efficacy was determined by cystoscopy and biopsy, and patients who had no recurrence at 12 weeks were eligible for a second course of treatment. RESULTS: Seven patients were treated with an initial course (instillation on days 1 and 4). Two of the patients had a complete response at 12 weeks and received a second course of treatment. One patient remained without evidence of recurrence after a second course (total 24 weeks). One patient experienced a non-treatment-associated adverse event. Despite a transient rise in IFNα levels, sustained production was not demonstrated. CONCLUSION: Previously, Ad-IFNα intravesical therapy has shown promising drug efficacy. A prior phase 1 trial with a single instillation compared similarly with the current study, suggesting that a second instillation is not necessary to achieve sufficient urinary IFNα levels.

Synergistic effects of nucleating agents and plasticizers on the crystallization behavior of poly(lactic acid).

The synergistic effect of nucleating agents and plasticizers on the thermal and mechanical performance of PLA nanocomposites was investigated with the objective of increasing the crystallinity and balancing the stiffness and toughness of PLA mechanical properties. Calcium carbonate, halloysite nanotubes, talc and LAK (sulfates) were compared with each other as heterogeneous nucleating agents. Both the DSC isothermal and non-isothermal studies indicated that talc and LAK were the more effective nucleating agents among the selected fillers. Poly(D-lactic acid) (PDLA) acted also as a nucleating agent due to the formation of the PLA stereocomplex. The half crystallization time was reduced by the addition of talc to about 2 min from 37.5 min of pure PLA by the isothermal crystallization study. The dynamic mechanical thermal study (DMTA) indicated that nanofillers acted as both reinforcement fillers and nucleating agents in relation to the higher storage modulus. The plasticized PLA studied by DMTA indicated a decreasing glass transition temperature with the increasing of the PEG content. The addition of nanofiller increased the Young's modulus. PEG had the plasticization effect of increasing the break deformation, while sharply decreasing the stiffness and strength of PLA. The synergistic effect of nanofillers and plasticizer achieved the balance between stiffness and toughness with well-controlled crystallization.

A review of lactate-lactylation in malignancy: its potential in immunotherapy.

Lactic acid was formerly regarded as a byproduct of metabolism. However, extensive investigations into the intricacies of cancer development have revealed its significant contributions to tumor growth, migration, and invasion. Post-translational modifications involving lactate have been widely observed in histone and non-histone proteins, and these modifications play a crucial role in regulating gene expression by covalently attaching lactoyl groups to lysine residues in proteins. This discovery has greatly enhanced our comprehension of lactic acid's involvement in disease pathogenesis. In this article, we provide a comprehensive review of the intricate relationship between lactate and tumor immunity, the occurrence of lactylation in malignant tumors, and the exploitation of targeted lactate-lactylation in tumor immunotherapy. Additionally, we discuss future research directions, aiming to offer novel insights that could inform the investigation, diagnosis, and treatment of related diseases.

Association of the Stability Ratio With Postoperative Clinical Function and Recurrence of Instability in Patients With Anterior Shoulder Instability: A Retrospective Cohort Study.

Background: The stability ratio (SR) is used to assess the stability of the glenoid in anterior shoulder instability (ASI). However, the association between the SR and postoperative clinical function and instability recurrence after arthroscopic Bankart repair is unknown. Hypothesis: Patients with a higher SR would have better postoperative clinical scores and a lower incidence of recurrent instability than patients with a lower SR after arthroscopic Bankart repair. Study Design: Cohort study; Level of evidence, 3. Methods: A total of 62 patients who underwent arthroscopic Bankart repair for ASI between 2013 and 2019 were enrolled. All patients had at least 2 years of follow-up data. The preoperative SR was calculated via biomechanical testing based on patient-specific 3-dimensional glenoid models, and patients were evenly divided into 2 groups: high SR (≥16.13%) and low SR (<16.13%). Baseline information (patient characteristics, clinical history, bone defect area [BDA], and SR), clinical scores at the final follow-up (Single Assessment Numerical Evaluation, Western Ontario Shoulder Index, and American Shoulder and Elbow Surgeons), and instability recurrence were compared between the 2 groups. Results: No significant differences were found in the baseline information between the high- and low-SR groups, except for the BDA (8.5% [high-SR group] vs 11.9% [low-SR group]; P = .01). No patients in the high-SR group had recurrent instability, while 6 patients (19.4%) had recurrent instability in the low-SR group (P = .02). Patients in the high-SR group had superior clinical outcomes compared with those in the low-SR group in terms of postoperative Western Ontario Shoulder Index scores (median, 205 vs 410, respectively; P = .006) and American Shoulder and Elbow Surgeons scores (median, 98.3 vs 95, respectively; P = .02). Conclusion: In the present study, the SR was significantly associated with postoperative clinical function and recurrence of instability after arthroscopic Bankart repair in patients with ASI.

Bioinspired Liquid Metal Based Soft Humanoid Robots.

The pursuit of constructing humanoid robots to replicate the anatomical structures and capabilities of human beings has been a long-standing significant undertaking and especially garnered tremendous attention in recent years. However, despite the progress made over recent decades, humanoid robots have predominantly been confined to those rigid metallic structures, which however starkly contrast with the inherent flexibility observed in biological systems. To better innovate this area, the present work systematically explores the value and potential of liquid metals and their derivatives in facilitating a crucial transition towards soft humanoid robots. Through a comprehensive interpretation of bionics, an overview of liquid metals' multifaceted roles as essential components in constructing advanced humanoid robots-functioning as soft actuators, sensors, power sources, logical devices, circuit systems, and even transformable skeletal structures-is presented. It is conceived that the integration of these components with flexible structures, facilitated by the unique properties of liquid metals, can create unexpected versatile functionalities and behaviors to better fulfill human needs. Finally, a revolution in humanoid robots is envisioned, transitioning from metallic frameworks to hybrid soft-rigid structures resembling that of biological tissues. This study is expected to provide fundamental guidance for the coming research, thereby advancing the area.

Comparison of biportal endoscopic technique and uniportal endoscopic technique in Unilateral Laminectomy for Bilateral Decomprssion (ULBD) for lumbar spinal stenosis.

OBJECTIVE: Unilateral laminotomy for bilateral decompression (ULBD) has been adopted widely to treat lumbar spinal stenosis (LSS). The objective of the study is to investigate clinical and radiological outcomes of the biportal endoscopic ULBD (BE-ULBD) and uniportal endoscopic ULBD (UE-ULBD). METHODS: We collected retrospectively 65 patients' data who met the inclusion criteria (July 2019-June 2021). 33 patients underwent BE-ULBD surgery, and 32 patients underwent the UE-ULBD surgery, and were followed up for at least 1 year. The following preoperative and postoperative outcomes were compared between groups: the visual analog scale (VAS) for pain, the Oswestry disability index (ODI) for nerve function, and modified Macnab criteria for satisfaction, the cross-sectional area of the dural sac (DSCSA), the mean angle of facetectomy. RESULTS: Age, BMI, gender, levels of involvement and duration of symptoms were not significantly different at baseline in this study. Clinical data showed that postoperative ODI, VAS scores and Modified Macnab Criteria were not statistically different between the two groups. The BE-ULBD group had a shorter operation time than the UE-ULBD group (P < 0.001). Patients in the BE-ULBD group had a larger postoperative expansion of DSCSA expansion postoperatively (85.58 ± 3.16 mm2 VS 71.43 ± 3.35 mm2, P < 0.001) and a larger contralateral facetectomy angle (63.95 ± 3.34° vs 57.80 ± 3.43°, P < 0.001) compared with patients in the UE-ULBD group. There were no statistical differences in the incidence of postoperative complications between the two groups. CONCLUSION: Both the BE-ULBD and the UE-ULBD yielded clinical improvement in terms of pain and stenosis symptoms. The BE-ULBD technique has the advantages of the shorter operation time, larger DSCSA expansion and larger contralateral facetectomy angle.

Lightweight Dual-Functional Segregated Nanocomposite Foams for Integrated Infrared Stealth and Absorption-Dominant Electromagnetic Interference Shielding.

Lightweight infrared stealth and absorption-dominant electromagnetic interference (EMI) shielding materials are highly desirable in areas of aerospace, weapons, military and wearable electronics. Herein, lightweight and high-efficiency dual-functional segregated nanocomposite foams with microcellular structures are developed for integrated infrared stealth and absorption-dominant EMI shielding via the efficient and scalable supercritical CO2 (SC-CO2) foaming combined with hydrogen bonding assembly and compression molding strategy. The obtained lightweight segregated nanocomposite foams exhibit superior infrared stealth performances benefitting from the synergistic effect of highly effective thermal insulation and low infrared emissivity, and outstanding absorption-dominant EMI shielding performances attributed to the synchronous construction of microcellular structures and segregated structures. Particularly, the segregated nanocomposite foams present a large radiation temperature reduction of 70.2 °C at the object temperature of 100 °C, and a significantly improved EM wave absorptivity/reflectivity (A/R) ratio of 2.15 at an ultralow Ti3C2Tx content of 1.7 vol%. Moreover, the segregated nanocomposite foams exhibit outstanding working reliability and stability upon dynamic compression cycles. The results demonstrate that the lightweight and high-efficiency dual-functional segregated nanocomposite foams have excellent potentials for infrared stealth and absorption-dominant EMI shielding applications in aerospace, weapons, military and wearable electronics.