RESUMO
Effective manipulation of resonant mode, output power and modulation bandwidth of lasers are all of vital importance for practical application scenarios such as communication systems. We show that by breaking the parity-time (PT) symmetry, single mode operation lasing can be realized in an intrinsic multiple mode Fabry-Perot (FP) resonator. Two identical FP resonators are employed to establish a symmetric system and high output power can be achieved with lower fabrication difficulty and intracavity losses compared with ring resonators. The small-signal response and direct modulation of the PT-symmetric FP laser have also been demonstrated with electrical pumping. Our work opens new avenues for mode selection of high-performance FP lasers and provides a cost-effective candidate for practical applications such as communication systems.
RESUMO
We report a photonic approach to generate background-free multi-format dual-band microwave signals based on a single modulator, which is suitable for high-precision and fast detection of radars in complex electromagnetic environments. By applying different radio-frequency signals and electrical coding signals to the polarization-division multiplexing Mach-Zehnder modulator (PDM-MZM), the generation of dual-band dual-chirp signals or dual-band phase-coded pulse signals centered at 10 and 15.5â GHz is experimentally demonstrated. Furthermore, by choosing an appropriate fiber length, we verified that the generated dual-band dual-chirp signals are not affected by chromatic-dispersion induced-power fading (CDIP); meanwhile, by autocorrelation calculations, we got high pulse compression ratios (PCRs) of 13 of the generated dual-band phase-encoded signals, showing that the generated phase-encoded signals can be emitted directly without extra pulse truncation operation. The proposed system features a compact structure, reconfigurability and polarization independence, which is promising for multi-functional dual-band radar systems.
RESUMO
A self-referenced method based on heterodyne carrier mapping is proposed to characterize the modulation efficiency of high-speed electro-optic phase modulators (EOPMs). The heterodyne carrier mapping replicates the optical carrier after phase modulation to an electrical replica, which enables observing the power variation of the optical carrier at a fixed low-frequency in the electrical domain. The modulation depths and half-wave voltages within the frequency range of up to 40 GHz are determined by measuring the amplitude ratio of the mapped low-frequency component at 80 MHz in the cases of on and off single-tone modulation of the EOPM. The measured results are compared to those obtained with the traditional optical spectrum analysis method and the electrical spectrum sweep method to check the consistency and accuracy. Surpassing the heterodyne spectrum mapping (HSM) scheme, our method only requires a single-tone driving of the EOPM under test and completely avoids the roll-off responsivity of the photodetector through the fixed low-frequency detection.
RESUMO
As a photonic-based microwave signal generation method, the optoelectronic oscillator (OEO) has the potential of meeting the increasing demand of practical applications for high frequency, broadband tunability and ultra-low phase noise. However, conventional OEO systems implemented with discrete optoelectronic devices have a bulky size and low reliability, which extremely limits their practical applications. In this paper, a hybrid-integrated wideband tunable OEO with low phase noise is proposed and experimentally demonstrated. The proposed hybrid integrated OEO achieves a high integration level by first integrating a laser chip with a silicon photonic chip, and then connecting the silicon photonic chip with electronic chips through wire-bonding to microstrip lines. A compact fiber ring and an yttrium iron garnet filter are also adopted for high-Q factor and frequency tuning, respectively. The integrated OEO exhibits a low phase noise of -128.04 dBc/Hz @ 10 kHz for an oscillation frequency of 10â GHz. A wideband tuning range from 3â GHz to 18â GHz is also obtained, covering the entire C, X, and Ku bands. Our work demonstrates an effective way to achieve compact high-performance OEO based on hybrid integration, and has great potential in a wide range of applications such as modern radar, wireless communication, and electronic warfare systems.
RESUMO
Researchers have developed a uniform grating DFB with an integrated active optical feedback waveguide (UG-AFDFB) to enhance the modulation speed of direct modulation lasers (DMLs) while reducing costs based on identical active layer designations. However, this design has difficulties in obtaining high single mode yield (SMY) and low relative intensity noise (RIN) as a result of the strong optical feedback caused by the integrated active feedback waveguide (AFW) and the random phase of the facet phase. In this paper, a partial corrugated grating DFB with an integrated active optical feedback waveguide (PG-AFDFB) is proposed to address this issue. Comparison of SMY, S21, RIN, modulation eye pattern, and frequency chirp parameters between UG-AFDFB and PG-AFDFB based on time-domain transmission line laser mode reveals that PG-AFDFB with an optimized grating couple parameter κ performs significantly better than UG-AFDFB under the same conditions. Furthermore, the performance of PG-AFDFB is not sensitive to the random phase of the rear facet phase. Even when κ ranges from 6000 /m to 12000 /m, the current in the AFW is between 0â mA and 20â mA, and the length of the AFW ranges from 50â µm to 100â µm; the SMY of PG-AFDFB remains above 80%.
RESUMO
We present a photonics-based method of estimating Doppler frequency shift (DFS) and angle of arrival (AOA). The proposed identification method for the DFS and AOA is simultaneous and unambiguous. A reference radio frequency signal is introduced to realize the frequency downconversion. By monitoring the frequency of the downconverted signals generated after the photodetection, the direction ambiguity of the DFS is canceled out. The AOA can be instantaneously calculated through two downconverted signals via a Hilbert transform. Experimental results verify that a -77.90° to 77.90° AOA measurement with errors of less than ±1° is implemented, and a DFS measurement with errors of no more than ±3.1â Hz is also realized. Our proposed method not only removes the direction ambiguities of both DFS and AOA, but also avoids the dependence on echo signal power in AOA measurement, which largely increases the feasibility in realistic applications.
RESUMO
Ising machines have emerged as promising solvers for combinatorial optimization problems in recent years. In practice, these problems are often mapped into a frustrated Ising model due to randomness or competing interactions, which reduces the success ratio for finding the optimal solution. In this study, we simulate one-dimensional and two-dimensional frustrated Ising models in an Ising machine based on the optoelectronic oscillator. Our experiment aims to show the relationship between the Fourier mode of the coupling matrix and the spin distribution under frustration. The results prove the validity of the theoretical predictions and provide insights into the behavior of Ising machines in the presence of frustration. We believe it would help to develop a better strategy to improve the performance of Ising machines.
RESUMO
The nonlinear dynamic behavior of optoelectronic oscillators (OEOs), which is important for the OEO based applications, is investigated in detail by a Microwave-photonics Iterative Nonlinear Gain (MING) model in this paper. We connect the oscillating processes with the trajectories of an iterated map based on a determined nonlinear mapping relation referred to as open-loop input to output amplitude mapping relation (IOAM). The results show that the envelope dynamic is determined by the slope of IOAM at a special point called fixed point. Linear features dominate the loop if the slope is relatively large, and the nonlinear features emerge and become increasingly significant with the decreasing of the slope. Linear features of homogeneity and monotonicity are gradually lost. Furthermore, OEO is even unstable when the slope is less than a general threshold value of -1. The behavior of OEO loops with the different slope values are discussed by simulations and are experimentally confirmed. Moreover, the proposed model also applies to the OEO with an externally injected microwave signal, the bifurcation phenomena caused by injected signal are experimentally evidenced.
RESUMO
A photonic-assisted frequency downconverter with self-interference cancellation and fiber dispersion elimination is proposed for in-band full-duplex (IBFD) radio-over-fiber (ROF) systems based on stimulated Brillouin scattering. In this work, a dual-polarization Mach-Zehnder modulator (DPol-MZM) is employed to cancel the self-interference signal in the optical domain, thus the proposed system has a large operation bandwidth without the limitation of the electrical bottleneck. Meanwhile, a widely tunable microwave photonic filter (MPF) based on stimulated Brillouin scattering (SBS) is constructed to perform carrier-suppressed single-sideband modulation of LO. Therefore, the proposed photonic frequency downconverter is naturally free from fiber dispersion. Furthermore, thanks to the characteristics of the SBS-based MPF, such as large out-of-band rejection ratio, high resolution and wideband tunability, the proposed system has a high flexibility and downconversion efficiency, which is of great significance for IBFD ROF systems.
RESUMO
A self-reference and on-chip method for extracting the intrinsic frequency responses including modulation index and half-wave voltage of electro-optic modulator (EOM) chips is proposed based on photonic down-conversion sampling and microwave fixture de-embedding. The photonic down-conversion sampling is firstly employed to extract the combined response of the source network SxN, the adapter network SAN and the EOM chip. Then the Open-Short-Load (OSL) calibration is exploited to realize the on-chip microwave de-embedding of SxN and SAN in terms of the transmission attenuation and the impedance mismatch. Finally, the power leveling technique is used to track the incident microwave power to obtain the intrinsic half-wave voltage of the EOM chip. Our method features self-reference and on-chip capability, which is applicable for the EOM chips even without a good impedance match, and is free of any extra optical/electrical (O/E) transducer standard, which will be helpful to chip evaluation and packaging optimization.
RESUMO
An optical format interconversion scheme between on-off keying (OOK) and quadrature phase shift keying (QPSK) is proposed and verified in this paper. The conversion system mainly consists of a coherent vector combiner and a reconfigurable two-dimensional (2D) vector mover. As a key element of the proposed conversion system, the 2D vector mover is implemented by a non-degenerate phase-sensitive amplifier (PSA). The operating principle and theoretical derivations of the PSA-based 2D vector mover are fully introduced. The reconfigurable transfer characteristics of the vector mover are analyzed under different parameter settings to exhibit the flexible 2D moving function. The signal constellations, eye diagrams, spectrum, error vector magnitudes, and bit error ratios are estimated and depicted to validate the proposed idea. With the input signal-to-noise ratios of 20 dB and 25 dB, error-free conversions are achieved between 50G Baud OOK and QPSK. The scheme proposed in this paper fills the lack of the one-to-one interconversion between OOK and QPSK, and has potential applications in optical interconnect nodes, across-dimensional optical transmissions, and flexible optical transceivers.
RESUMO
A multi-period-delayed feedback (MPDF) photonic circuit constructed by a Sagnac ring and two coupled rings was designed. By coupling a distributed feedback (DFB) laser diode (LD) with the MPDF, a narrow linewidth semiconductor laser was demonstrated. The linewidth of the DFB-LD with MPDF was narrowed to be around 2 kHz, which is reduced by three orders of magnitude, and the linewidth reduction capability could be maintained when the wavelength of the DFB-LD was tuned in a range wider than 3 nm. The laser frequency stability can also be improved using the proposed technique, and the frequency fluctuation was reduced for nearly 8 times in comparison with the DFB-LD.
RESUMO
We propose a microwave photonic temperature interrogation system with high resolution and sensitivity based on temperature-to-time mapping with a simple structure. In this work, a bidirectional chirped optical signal is constructed, and the temperature information is mapped to the time interval change of the output pulses by filtering the bidirectional chirped optical signal using the transmission spectrum of a Fabry-Perot filter. Only a low-speed oscilloscope is required to extract the time interval of the output pulses in the proposed scheme, and complex data processing as well as synchronizing processes are avoided. In a proof-of-concept experiment, a high temperature interrogation sensitivity of 18.24 µs/°C and a high resolution of 0.035°C are realized, demonstrating good potential for practical applications.
RESUMO
A radio-over-fiber (RoF) link with high spectral efficiency using digital phase cancellation is proposed and experimentally verified. The link can be utilized to transmit four microwave vector signals. The four microwave vector signals are modulated on optical signals by using a dual-polarization dual-parallel Mach-Zehnder modulator at the transmitter. The optical signals subsequently pass through a spool of single-mode fiber (SMF) and are sent into a coherent receiver. A digital signal processing (DSP) algorithm is proposed to eliminate the phase noise and frequency difference caused by two free-running lasers at transmitter and receiver. Two 16-quadrature amplitude modulation (16-QAM) vector signals at 6 GHz and another two 16-QAM vector signals at 7 GHz transmit over a 10-km SMF and are successfully recovered after a DSP algorithm. In order to evaluate the transmission performance of the RoF link, error vector magnitudes and bit error rates are also estimated.
RESUMO
A simple method is proposed for measuring frequency responses of photodetectors (PDs) based on wavelength-to-time mapping in this paper. The proposed method is an all-optical scheme, which is simple, fast, accurate and free from any extra calibration. Optical pulses emitted from a mode-locked laser are firstly pre-chirped by a spool of dispersive compensation fiber. In this way, the frequency spectrum of the pulses is mapped into time domain. Then, the pre-chirped pulses beat with a reference continuous wave laser with a fixed wavelength in the PD under test and generate a linearly chirped microwave signal. The frequency response information of the PD can be decoded by analyzing the generated linearly chirped microwave signal. Experimental results show that the frequency response of the PD with 3-dB bandwidth of â¼15GHz has been accurately measured with a resolution of â¼390MHz. The measurement result agrees well with the one measured by the commercial lightwave component analyzer.
RESUMO
A secure fiber-optic communication system based on Internet-accessible multipath transmission of ciphertext fragment (MTCF) technology is proposed and demonstrated in this paper. By performing algorithm encryption on the transmitted data before randomly assigning them to multiple channels corresponding to different wavelengths or Internet protocols (IPs), the secure and long-distance transmission can be realized. A field trial experiment over 125 km between Beijing and Xiongan has been successfully undertaken, and the results show that the maximum throughput can reach 60 Mb/s, which demonstrates the feasibility of the scheme. We also established a theoretical model to analyze the security performance of the proposed system. As far as we know, this is the first time that MTCF, an optical physical layer and application layer integrated security technology, has been enjoyed the capacity to access the public network, which provides an exciting opportunity to advance our knowledge of long-distance secure communication.
RESUMO
We present a novel broadband divide-by-2 microwave photonic injection locking frequency divider (ILFD) based on a dual-loop optoelectronic oscillator (OEO). In the proposed scheme, a tunable microwave photonic filter is used to replace the traditional electrical filter, which makes sure a large tuning range of the ILFD. The microwave photonic ILFD whose center frequency tracks the tunable frequency of the free-running OEO, links up with every single locking range together. Thus the frequency range is only determined by the tunable OEO. In the experiment, a wide operating frequency range from 4.51 GHz to 34.88 GHz is realized. Furthermore, a divide-by-3 ILFD is experimentally demonstrated with the help of a frequency mixer.
RESUMO
We propose and experimentally demonstrate a microwave frequency measurement system based on the photonic technique. An amplitude comparison function is constructed to perform frequency-to-power mapping based on a non-sliced broadband optical source. The results are fed into a machine learning module which can be utilized to minimize the differential mode noise of the system caused by the polarization fluctuation. The system is reconfigurable with adjustable measurement bandwidth by adjusting the dispersion group delay of the signals at orthogonal polarizations by a polarization division multiplexed emulator (PDME). In addition, the mapping relationship is reconstructed by stacking method. The results are fed into four machine learning models: support vector regressor (SVR), KNeighbors regressor (KNN), polynomial regressor (PR) and random forest regressor (RFR). The output of the four models then combined by adding them together using linear regression method. By fitting the relationship between frequency and microwave power ratio with machine learning method, the accuracy of microwave frequency measurement system is further improved. The results show that for a measurement system with a bandwidth of 2 GHz and 4 GHz, the maximum error and the average measurement errors are all reduced. The results are promising for applications of modern radar and electronic warfare systems.
RESUMO
We report a photonic-assisted radio frequency self-interference cancellation (RF-SIC) and frequency down-conversion scheme based on a dual-polarization Mach-Zehnder modulator (DP-MZM) by using a polarization manipulation method. In the proposed scheme, the self-interference signal is directly canceled in the optical domain by simply controlling the polarization states between the output of the DP-MZM and the polarizer. Frequency down-conversion is achieved by optoelectronic frequency mixing. In the proof-of-concept experiment, the interference cancellation of the single-frequency signal and wideband signal was conducted. The proposed RF-SIC and frequency down-conversion system has flexible tunability, simple structure, and low cost, which can find potential applications in radio-over-fiber systems.
RESUMO
Nonlocal wavelength-to-time mapping between frequency-entangled photon pairs generated with the process of spontaneous parametric down-conversion is theoretically analyzed and experimentally demonstrated. The spectral filtering pattern experienced by one photon in the photon pair will be non-locally mapped into the time domain when the other photon propagates inside a dispersion-compensation fiber with large group velocity dispersion. Our work, for the first time, points out that the spectral bandwidth of the pump laser will become the dominated factor preventing the improvement of the spectral resolution when the involved group velocity dispersion is large enough, which provides an excellent tool for characterizing the resolution of a nonlocal wavelength-to-time mapping for further quantum information applications.