MOF-Derived ZrO2-Supported Bimetallic Pd-Ni Catalyst for Selective Hydrogenation of 1,3-Butadiene.

A series of MOF-derived ZrO2-supported Pd-Ni bimetallic catalysts (PdNi/UiO-67-CTAB(n)-A500) were prepared by co-impregnation and pyrolysis at 500 °C under air atmosphere using UiO-67-CTAB(n) (CTAB: cetyltrimethylammonium bromide; n: the concentration of CTAB; n = 0, 3, 8, 13, 18) as a sacrificial template. The catalytic activity of PdNi/UiO-66-CTAB(n)-A500 in 1,3-butadiene hydrogenation was found to be dependent on the crystal morphology of the UiO-67 template. The highest activity was observed over the PdNi/UiO-67-CTAB(3)-A500 catalyst which was synthesized using UiO-67-CTAB(3) with uniform octahedral morphology as the template for the 1,3-butadiene selective hydrogenation. The 1,3-butadiene conversion and total butene selectivity were 98.4% and 44.8% at 40 °C within 1 h for the PdNi/UiO-67-CTAB(3)-A500 catalyst, respectively. The catalyst of PdNi/UiO-67-CTAB(3)-A500 can be regenerated in flowing N2 at 200 °C. Carbon deposited on the surface of the catalyst was the main reason for its deactivation. This work is valuable for the high-efficiency bimetallic catalyst's development on the selective hydrogenation of 1,3-butadiene.

Industry-wide review of potential worker exposure to 1,3-butadiene during chemical manufacturing and processing as a reactant.

Among the first 20 high-priority chemical substances selected by USEPA to undergo risk evaluation as part of the Toxic Substances Control Act, as amended by the Frank R. Lautenberg Chemical Safety for the 21st Century Act of 2016 is 1,3-butadiene (1,3-BD). Because much of the literature related to occupational exposure to 1,3-BD is associated with the use of the substance in synthetic rubber production and few data have been published for exposures to 1,3-BD manufacturing workers, existing industrial hygiene data collected at facilities where the substance is manufactured or processed as a reactant were compiled and analyzed. The dataset was comprised of personal air samples collected between 2010 and 2019 at facilities located throughout the United States and was compiled into a single database using a uniform data collection template. Data designated by the companies as full-shift were stratified by job group and one of three operational conditions of the workplace: routine, turnaround, and non-routine. Data designated by the companies as short-term and task-level were stratified by task description, sample duration, and operational condition. The final aggregated database contained a total of 5,676 full-shift personal samples. Mean concentrations of 1,3-BD for the job groups ranged from 0.012 ppm to 0.16 ppm. High-end estimates of 1,3-BD air concentrations for the job groups under routine operations ranged from 0.014 ppm to 0.23 ppm. The aggregated database also included 1,063 short-term and task-level personal samples. For short-term samples (< =15 min), mean concentrations ranged from 0.49 ppm to 3.9 ppm, with the highest concentrations observed for the cleaning and maintaining equipment tasks. For task samples with durations greater than 15 min, mean concentrations ranged from 0.49 to 3.6 ppm, with the highest concentrations observed for the unloading and loading task. In addition to the personal air sampling records, information on the use of PPE during various tasks was compiled and analyzed. This data set provides robust quantitative air concentration data and exposure control information for which occupational exposures to 1,3-BD in the Manufacturing and Processing as a Reactant condition of use can be assessed.

Biohydrogenation of 1,3-Butadiene to 1-Butene under Acetogenic Conditions by Acetobacterium wieringae.

The environmental fate and transformation mechanism(s) of 1,3-butadiene (BD) under anoxic conditions remain largely unexplored. Anaerobic consortia that can biohydrogenate BD to stoichiometric amounts of 1-butene at a maximum rate of 205.7 ± 38.6 µM day-1 were derived from freshwater river sediment. The formation of 1-butene occurred only in the presence of both H2 and CO2 with concomitant acetate production, suggesting the dependence of BD biohydrogenation on acetogenesis. The 16S rRNA gene-targeted amplicon sequencing revealed the enrichment and dominance of a novel Acetobacterium wieringae population, designated as strain N, in the BD-biohydrogenating community. Multiple genes encoding putative ene-reductases, candidate catalysts for the hydrogenation of the C═C bond in diene compounds, were annotated on the metagenome-assembled genome of strain N, and thus attributed the BD biohydrogenation activity to strain N. Our findings emphasize an essential but overlooked role of certain Acetobacterium members (e.g., strain N) contributing to the natural attenuation of BD in contaminated subsurface environments (e.g., sediment and groundwater). Future efforts to identify and characterize the ene-reductase(s) responsible for BD biohydrogenation in strain N hold promise for the development of industrial biocatalysts capable of stereoselective conversion of BD to 1-butene.

Investigating the Properties of Double Triangle Terthiophene Configured Dumbbell-Like Photochromic Dye with Ethyne and 1,3-Butadiene Bridge.

Dumbbell-like photochromic dyes were constructed by incorporation of double triangle terthiophene with ethyne or 1,3-butadiene bridge. Regular photochromic behavior was investigated with alternated UV (365 nm) and Visible light (˃ 400 nm) irradiation. However, the different bridge group leads to distinct difference in their photochromic wavelength. For the ethyne bridged triangle terthiophene (DT1), the photochromic wavelength was observed around 500-700 nm (peak value: 605 nm) and the solution turned to red with 365 nm light irradiation. However, the photochromic wavelength was blue shift to 418-550 nm and the solution was turned to light yellow for 1,3-butadiene bridged dye (DT2). Both of the colored solution can be bleached via visible light irradiation. Additionally, the two dyes in THF were emissive with absolute quantum yield (QY) of 0.36/0.40. Along with the photo-induced photocyclization process, the emissive solution can be effectively quenched at photo-stationary sate (Φ = 0.05/0.04). And emission "on-off" cycle could be established based on the UV/visible light irradiation cycle.

Associations of urinary 1,3-butadiene metabolite with glucose homeostasis, prediabetes, and diabetes in the US general population: Role of alkaline phosphatase.

The chemical - 1,3-butadiene (BD) is a volatile organic compound ubiquitous in the environment. However, the relationships and underlying mechanisms between BD exposure and glucose dyshomeostasis and diabetes in the general population remain unclear. We sought to explore the associations of BD exposure with glucose homeostasis, prediabetes, and diabetes, as well as the role of serum alkaline phosphatase (ALP) in these associations. This study included 5092 US general residents from the National Health and Nutrition Examination Survey with measurements of urinary BD metabolite (N-Acetyl-S-(3,4-dihydroxybutyl)-L-cysteine, DHBMA) and serum ALP. Glucose homeostasis was evaluated by fasting plasma glucose (FPG), fasting serum insulin (FINS), glycohemoglobin (HbA1c), and homeostasis model assessment of insulin resistance (HOMA-IR). HOMA-IR>2.6 was considered as insulin resistance (IR). Prediabetes and diabetes were determined according to the recommendations of the American Diabetes Association. The associations of DHBMA with glucose homeostasis, prediabetes, and diabetes were assessed by linear regression models and logistic regression models. The mediating role of ALP was evaluated by mediation analysis. We observed positive dose-response relationships of DHBMA level with glucose homeostasis indices and ALP levels, as well as with the risks of prediabetes and diabetes (all P < 0.05 and/or P for trend <0.05). Each 2-fold increase in DHBMA was associated with a 1.32%, 9.20%, 0.72%, and 10.64% increase in FPG, FINS, HbA1c, and HOMA-IR, respectively (all P < 0.05). And the corresponding odds ratios (ORs) and 95% confidence intervals (CIs) for IR, prediabetes, and diabetes were 1.36 (1.14, 1.61), 1.51 (1.26, 1.83), and 1.20 (0.90, 1.61), respectively. Furthermore, increased ALP significantly mediated 15.29%-41.12% of the associations of DHBMA with glucose dyshomeostasis and increased risks of prediabetes and diabetes. Our findings indicated that BD exposure was associated with glucose dyshomeostasis and increased risks of prediabetes and diabetes. The upregulation of ALP might play a significant role in these associations.

Novel Route to Cationic Palladium(II)-Cyclopentadienyl Complexes Containing Phosphine Ligands and Their Catalytic Activities.

The Pd(II) complexes [Pd(Cp)(L)n]m[BF4]m were synthesized via the reaction of cationic acetylacetonate complexes with cyclopentadiene in the presence of BF3∙OEt2 (n = 2, m = 1: L = PPh3 (1), P(p-Tol)3, tris(ortho-methoxyphenyl)phosphine (TOMPP), tri-2-furylphosphine, tri-2-thienylphosphine; n = 1, m = 1: L = dppf, dppp (2), dppb (3), 1,5-bis(diphenylphosphino)pentane; n = 1, m = 2 or 3: 1,6-bis(diphenylphosphino)hexane). Complexes 1-3 were characterized using X-ray diffractometry. The inspection of the crystal structures of the complexes enabled the recognition of (Cp-)⋯(Ph-group) and (Cp-)⋯(CH2-group) interactions, which are of C-H…π nature. The presence of these interactions was confirmed theoretically via DFT calculations using QTAIM analysis. The intermolecular interactions in the X-ray structures are non-covalent in origin with an estimated energy of 0.3-1.6 kcal/mol. The cationic palladium catalyst precursors with monophosphines were found to be active catalysts for the telomerization of 1,3-butadiene with methanol (TON up to 2.4∙104 mol 1,3-butadiene per mol Pd with chemoselectivity of 82%). Complex [Pd(Cp)(TOMPP)2]BF4 was found to be an efficient catalyst for the polymerization of phenylacetylene (PA) (catalyst activities up to 8.9 × 103 gPA·(molPd·h)-1 were observed).

H2 -free Semi-hydrogenation of Butadiene by the Atomic Sieving Effect of Pd Membrane with Tree-like Pd Dendrites Array.

H2 -free semi-hydrogenation at room temperature shows great advantage for replacing the thermocatalytic process in industry owing to the high energy and resource saving, however, remains great challenges. Herein, a tree-like Pd dendrites array decorated Pd membrane was constructed as the core device in an electrochemistry assisted gas-fed membrane reactor for butadiene semi-hydrogenation. It reveals that hydrogen atomic sieving effect of this Pd-based membrane under electrochemical condition was the key for semi-hydrogenation. The configuration study of Pd nanostructured membrane demonstrates that the penetration of hydrogen atoms through Pd membrane from electrochemical side to chemical side is affected by the consumption of hydrogen atom in semi-hydrogenation step. Such atomic sieving property of nanostructured Pd membrane with 5.1 times increase in catalytic active surface area brings above 14 times higher in butadiene conversion than that of bare Pd foil, with ≈90 % of butenes selectivity at butadiene conversion ≈98 % over 300 h of H2 -free reaction under 15 mA cm-2 .

DEB-FAPy-dG Adducts of 1,3-Butadiene: Synthesis, Structural Characterization, and Formation in 1,2,3,4-Diepoxybutane Treated DNA.

Metabolic activation of the human carcinogen 1,3-butadiene (BD) by cytochrome 450 monooxygenases gives rise to a genotoxic diepoxide, 1,2,3,4-diepoxybutane (DEB). This reactive electrophile alkylates guanine bases in DNA to produce N7-(2-hydroxy-3,4-epoxy-1-yl)-dG (N7-DE-dG) adducts. Because of the positive charge at the N7 position of the purine heterocycle, N7-DEB-dG adducts are inherently unstable and can undergo spontaneous depurination or base-catalyzed imidazole ring opening to give N6 -[2-deoxy-D-erythro-pentofuranosyl]-2,6-diamino-3,4-dihydro-4-oxo-5-N-1-(oxiran-2-yl)propan-1-ol-formamidopyrimidine (DEB-FAPy-dG) adducts. Here we report the first synthesis and structural characterization of DEB-FAPy-dG adducts. Authentic standards of DEB-FAPy-dG and its 15 N3 -labeled analogue were used for the development of a quantitative nanoLC-ESI+ -HRMS/MS method, allowing for adduct detection in DEB-treated calf thymus DNA. DEB-FAPy-dG formation in DNA was dependent on DEB concentration and pH, with higher numbers observed under alkaline conditions.

Use of biomarker data and metabolite relative potencies to support derivation of noncancer reference values based on the reproductive and developmental toxicity effects of 1,3-butadiene.

Subchronic and chronic reference values (RfVs) were derived for 1,3-butadiene (BD) based upon its ability to cause reproductive and developmental effects observed in laboratory mice and rats. Metabolism has been well-established as an important determinant of the toxicity of BD. A major challenge to human health risk assessment is presented by large quantitative species differences in the metabolism of BD, differences that should be accounted for when the rodent toxicity responses are extrapolated to humans. The methods of Fred et al. (2008)/Motwani and Törnqvist (2014) were extended and applied here to the noncancer risk assessment of using data-derived extrapolation factors to account for species differences in metabolism, as well as differences in cytotoxic potency of three BD metabolites. This approach made use of biomarker data (hemoglobin adducts) to quantify species differences in the internal doses of BD metabolites experienced in mice, rats and humans. Using these methods, the dose-response relationships in mice and rats exhibit improved concordance, and result in subchronic and chronic inhalation reference values of 29 and 10 ppm, respectively, for BD. Confidence in these reference values is considered high, based on high confidence in the key studies, medium-to-high confidence in the toxicity database, high confidence in the estimates of internal dose, and high confidence in the dose-response modeling.

Demonstration of VOC Fenceline Sensors and Canister Grab Sampling near Chemical Facilities in Louisville, Kentucky.

Experimental fenceline sensor pods (SPods) fitted with 30 s duration canister grab sampling (CGS) systems were deployed at a site near chemical facilities in Louisville, KY, from 4 June 2018 to 5 January 2020. The objective of the study was to better understand lower cost 10.6 eV photoionization detector (PID)-based volatile organic compound (VOC) sensors and investigate their utility for near-source emissions detection applications. Prototype SPods containing PID sensor elements from two different manufacturers yielded between 78% and 86% valid data over the study, producing a dataset of over 120,000 collocated pair fenceline measurements averaged into 5-min datapoints. Ten-second time-resolved SPod data from an elevated fenceline sensor signal day are presented, illustrating source emission detections from the direction of a facility 500 m west of the monitoring site. An SPod-triggered CGS acquired in the emission plume on this day contained elevated concentrations of 1,3-butadiene and cyclohexane (36 parts per billion by volume (ppbv) and 637 ppbv, respectively), compounds known to be emitted by this facility. Elevated concentrations of these compounds were observed in a subset of the 61 manual and triggered CGS grab samples acquired during the study, with winds from the west. Using novel wind-resolved visualization and normalization approaches described herein, the collocated pair SPod datasets exhibited similarity in emission source signature. With winds from the west, approximately 50% of SPod readings were above our defined theoretical detection limit indicating persistent measurable VOC signal at this site. Overall, this 19-month study demonstrated reasonable prototype SPod operational performance indicating that improved commercial forms of lower cost PID sensors could be useful for select VOC fenceline monitoring applications.

Light-Assisted Semi-Hydrogenation of 1,3-Butadiene with Water.

Sustainable processes for semi-hydrogenation of alkynes/alkadienes impurities in alkenes feedstocks are in great demand in industry as the utilization of excessive hydrogen, high temperature and unsatisfactory alkenes selectivity of the current thermo-catalytic route, however, their development is still challenging. Herein, we innovate a light-assisted semi-hydrogenation process in gas-feed fixed bed reactor, with water as hydrogen atom source by in situ photocatalysis. Using Pd/TiO2 as model catalyst, this process shows an excellent catalytic performance for the semi-hydrogenation of 1,3-butadiene, with 100 % of butenes selectivity at ≈99 % of conversion over 180 h of reaction at ambient temperature driven by 66 mW cm-2 of irradiation intensity. This light-driven, H2 -free, ambient temperature semi-hydrogenation process, with superior performance to that of thermocatalytic route, shows attractive to bring an evolution in industrial hydrogenation technology to an economical and safe way.

The importance of evaluating specific myeloid malignancies in epidemiological studies of environmental carcinogens.

INTRODUCTION: Although myelodysplastic syndrome (MDS), acute myeloid leukemia (AML), myeloproliferative neoplasms (MPN) - including chronic myeloid leukemia (CML) - and myelodysplastic/myeloproliferative neoplasms (MDS/MPN) are largely clinically distinct myeloid malignancies, epidemiological studies rarely examine them separately and often combine them with lymphoid malignancies, limiting possible etiological interpretations for specific myeloid malignancies. METHODS: We systematically evaluated the epidemiological literature on the four chemical agents (1,3-butadiene, formaldehyde, benzene, and tobacco smoking, excluding pharmaceutical, microbial and radioactive agents, and pesticides) classified by the International Agency for Research on Cancer as having sufficient epidemiological evidence to conclude that each causes "myeloid malignancies." Literature searches of IARC Monographs and PubMed identified 85 studies that we critically assessed, and for appropriate subsets, summarized results using meta-analysis. RESULTS: Only two epidemiological studies on 1,3-butadiene were identified, but reported findings were inadequate to evaluate specific myeloid malignancies. Studies on formaldehyde reported results for AML and CML - and not for MDS or MPN - but reported no increased risks. For benzene, several specific myeloid malignancies were evaluated, with consistent associations reported with AML and MDS and mixed results for CML. Studies of tobacco smoking examined all major myeloid malignancies, demonstrating consistent relationships with AML, MDS and MPN, but not with CML. CONCLUSIONS: Surprisingly few epidemiological studies present results for specific myeloid malignancies, and those identified were inconsistent across studies of the same exposure, as well as across chemical agents. This exercise illustrates that even for agents classified as having sufficient evidence of causing "myeloid malignancies," the epidemiological evidence for specific myeloid malignancies is generally limited and inconsistent. Future epidemiological studies should report findings for the specific myeloid malignancies, as combining them post hoc - where appropriate - always remains possible, whereas disaggregation may not. Furthermore, combining results across possibly discrete diseases reduces the chances of identifying important malignancy-specific causal associations.

Exposure to 1,3-Butadiene in the U.S. Population: National Health and Nutrition Examination Survey 2011-2016.

1,3-Butadiene is a volatile organic compound with a gasoline-like odour that is primarily used as a monomer in the production of synthetic rubber. The International Agency for Research on Cancer has classified 1,3-butadiene as a human carcinogen. We assessed 1,3-butadiene exposure in the U.S. population by measuring its urinary metabolites N-acetyl-S-(3,4-dihydroxybutyl)-L-cysteine (34HBMA), N-acetyl-S-(1-hydroxymethyl-2-propenyl)-L-cysteine (1HMPeMA), N-acetyl-S-(2-hydroxy-3-butenyl)-L-cysteine (2HBeMA), and N-acetyl-S-(4-hydroxy-2-buten-1-yl)-L-cysteine (4HBeMA). Urine samples from the 2011 to 2016 National Health and Nutrition Examination Survey were analysed for 1,3-butadiene metabolites using ultrahigh-performance liquid chromatography/tandem mass spectrometry. 34HBMA and 4HBeMA were detected in >96% of the samples; 1HMPeMA and 2HBeMA were detected in 0.66% and 9.84% of the samples, respectively. We used sample-weighted linear regression models to examine the influence of smoking status (using a combination of self-reporting and serum-cotinine data), demographic variables, and diet on biomarker levels. The median 4HBeMA among exclusive smokers (31.5 µg/g creatinine) was higher than in non-users (4.11 µg/g creatinine). Similarly, the median 34HBMA among exclusive smokers (391 µg/g creatinine) was higher than in non-users (296 µg/g creatinine). Furthermore, smoking 1-10, 11-20, and >20 cigarettes per day (CPD) was associated with 475%, 849%, and 1143% higher 4HBeMA (p < 0.0001), respectively. Additionally, smoking 1-10, 11-20, and >20 CPD was associated with 33%, 44%, and 102% higher 34HBMA (p < 0.0001). These results provide significant baseline data for 1,3-butadiene exposure in the U.S. population, and demonstrate that tobacco smoke is a major exposure source.

A reproductive and developmental toxicity screening study of 1,3-butadiene in Sprague-Dawley rats.

1,3 Butadiene (BD) is an industrial intermediate used primarily in product manufacturing with the greatest exposure potential via inhalation. BD was evaluated for reproductive and developmental effects in a Good Laboratory Practice (GLP)-compliant, extended OECD 421 guideline study (completed 2003). Twelve-week old rats (12/sex/dose) were exposed via whole-body inhalation to BD vapor (0, 300, 1500, 6000 ppm) for 6 h/day, 7 days/week, starting 14 days prior to mating through the day prior to euthanasia (total exposures: 83-84 days for F0 males 60-70 days for F0 females). Select F1 offspring (1/sex/litter) were dosed 7 days (postnatal days 21-27 or 28-34), then necropsied. At 1500 and 6000 ppm, treatment-related facial soiling was seen in F0 males and females with decreased body weights/gains in F0 males. F1 males and females exhibited similar effects at 1500 and 6000 ppm. Importantly, the F0 generation had no evidence of altered sperm production, testicular effects, or ovarian atrophy, which were sensitive responses in mice. The no-observed-adverse-effect-level (NOAEL) is 300 ppm due to decreased body weight/gain and facial soiling at 1500 ppm, whereas 6000 ppm serves as a NOAEL for reproductive and developmental endpoints. This study contributes to the weight-of-evidence of differential BD reproductive toxicity in rats and mice.

Some Novel Cobalt Diphenylphosphine Complexes: Synthesis, Characterization, and Behavior in the Polymerization of 1,3-Butadiene.

Some novel cobalt diphenylphosphine complexes were synthesized by reacting cobalt(II) chloride with (2-methoxyethyl)diphenylphosphine, (2-methoxyphenyl)diphenylphosphine, and 2-(1,1-dimethylpropyl)-6-(diphenylphosphino)pyridine. Single crystals suitable for X-ray diffraction studies were obtained for the first two complexes, and their crystal structure was determined. The novel compounds were then used in association with methylaluminoxane (MAO) for the polymerization of 1,3-butadiene, and their behavior was compared with that exhibited in the polymerization of the same monomer by the systems CoCl2(PnPrPh2)2/MAO and CoCl2(PPh3)2/MAO. Some significant differences were observed depending on the MAO/Co ratio used, and a plausible interpretation for such a different behavior is proposed.

A Review on Hexachloro-1,3-butadiene (HCBD): Sources, Occurrence, Toxicity and Transformation.

Hexachloro-1,3-butadiene (HCBD) is a persistent organic pollutant listed in Annex A and C of the Stockholm Convention. This review summarized the sources, occurrence, toxicity, and transformation of HCBD in the environment. HCBD had no natural sources, and anthropogenic sources made it frequently detected in environmental medium, generally at µg L- 1 and µg kg- 1 in water and soil (or organism) samples, respectively. HCBD posed reproductive, genetic, and potentially carcinogenic toxicity to organisms, threatening human health and the ecosystem. Upon biodegradation, photodegradation and physicochemical degradation processes, HCBD can be degraded to a different extent. Nevertheless, further studies should be focused on the potential emission sources and the impact of HCBD on human health and the environment. Additionally, exploring removal technologies based on advanced oxidation and reduction are recommended.

Enabling Racemization of Axially Chiral Subphthalocyanine-Tetracyanobutadiene-Aniline Enantiomers by Triplet State Photogeneration.

In recent years, several tetracyanobuta-1,3-diene (TCBD) conjugates have been prepared by linking the tetracyano unit to various electroactive moieties. These push-pull conjugates, besides showing interesting physicochemical properties, are axially chiral, a feature arising from the restricted rotation around the central bond of the butadiene. Yet, only in a few cases, separation and isolation of the enantiomers have been successfully achieved, owing to the configurational lability of the corresponding enantiopure species. Herein, we report the first example of photo- and electroactive TCBD-based derivatives showing unprecedented configurational stability and a peculiar light-triggered enantiomer conversion mechanism enabled by triple-state photogeneration. These systems represent a nice addition to the fast-increasing arsenal of artificial, light-controllable molecular switches.

Genotoxicity evaluation of carbon monoxide and 1,3-butadiene using a new joint technology: the in vitro γH2AX HCS assay combined with air-liquid interface system.

To investigate the genotoxicity of gaseous toxicants carbon monoxide (CO) and 1,3-butadiene in vitro, a novel combination technology-the in vitro γH2AX high content screening assay combined with air-liquid interface system (ALIS) was established. The results showed that this new technology was available and effective. Based on the joint technology, genotoxicity of CO and 1,3-butadiene was evaluated further in this study. The results showed that treatment concentrations (0, 20%,40%, 80% and 100%, v/v) and exposure time (15, 30, 45, 60 and 90 min) of CO both had no statistically significant effects on the induction of γH2AX (p > 0.05). However, 1,3-butadiene can induce significant γH2AX (p < 0.01) in A549 cells in a dose/time-dependent manner both in the absence and presence of rat liver S9. When the concentrations of 1,3-butadiene were more than 80%, a higher γH2AX level could be induced than the 1.5-fold of vehicle controls after 1 h of treatment. Overall, this new technology can be used as a complementary tool to evaluate the genotoxicity of air-borne toxicants in vitro based on the in vitro γH2AX high content screening assay combined with ALIS. Based on the joint technology, CO was not genotoxic in A549 cells, while 1,3-butadiene showed significant genotoxicity in the dose/time-dependency on the induction of γH2AX.

Aggregation-Induced Emission of Multiphenyl-Substituted 1,3-Butadiene Derivatives: Synthesis, Properties and Application.

Organic functional materials, including conjugated molecules and fluorescent dyes, have been intensely developed in recent years because they can be applied in many fields, such as solar cells, biosensing and bioimaging, and medical adjuvant therapy. Organic functional materials with aggregation-induced emission or aggregation-enhanced emission (AIE/AEE) characteristics have increasingly attracted attention due to their high quantum efficiency in the aggregated or solid state. A large variety of AIE/AEE materials have been designed and applied during the exponential growth of research interest in the abovementioned fields. Multiphenyl-substituted 1,3-butadiene (MPB), as a core structure that includes tetraphenyl-1,3-butadiene, hexaphenyl-1,3-butadiene and their derivatives, show a typical AIE/AEE feature and can be potentially used in all the above-mentioned fields. This review summarizes the design principles, the corresponding syntheses, and the structure-property relationships of MPBs, as well as their excellent innovative functionalities and applications. This review will be useful for scientists conducting chemistry, materials, and biomedical research in AIE/AEE-related fields.

From Carboxytelomerization of 1,3-Butadiene to Linear α,ω-C10 -Diester Combinatoric Approaches for an Efficient Synthetic Route.

Two novel reaction pathways were tested to synthesize the linear α,ω-C10 -diester exclusively from three basic reagents: 1,3-butadiene, carbon monoxide and methanol. Therefore, carboxytelomerization of 1,3-butadiene and methanol was merged with methoxycarbonylation in two different ways to obtain highly linear C10 -diester. Through a palladium-based and -assisted tandem catalytic system, 22 % yield of the desired C10 -diester was obtained without isolating the intermediates. Subsequently, the limitations of the novel assisted tandem catalytic concept were uncovered and based on that, a two-step reaction regime was established. By optimization of the carboxytelomerization, the C9 -monoester as intermediate could be formed in nearly quantitative yields and excellent linearity. In a second reaction step, the isolated monoester was successfully converted by methoxycarbonylation into the desired linear C10 -diester in overall yields up to 84 %.