Pyrolysis of antibiotic mycelial residue for biochar: Kinetic deconvolution, biochar properties, and heavy metal immobilization.

The safe disposal of antibiotic mycelial residue (AMR), a hazardous waste, is a pressing problem owing to the spread of antibiotic and heavy metal pollution. In this study, AMR pyrolysis at different temperatures and heating rates was investigated to prepare valuable biochar for heavy metal immobilization. The results showed that AMR decomposition mainly involved three pseudo-reactions, with average activation energies of 252.4, 149.8, and 219.7 kJ/mol, that fitted a three-dimensional diffusion model. Increasing the pyrolysis temperature and heating rate decreased the yield and volatile matter content of biochar, but the ash content, fixed carbon content, and aromaticity increased. The AMR-derived biochar had a favorable fuel property (18.1-19.8 MJ/kg) and stability against degradation in soil. Calcium oxalate hydrate, a major mineral in AMR, degraded during biochar formation. Furthermore, high pyrolysis temperature promoted the residual fractions of Cr, Cu, Zn, Cd, and Pb in biochar, more so than did the heating rate, inducing a low potential ecological risk. In particular, the leaching rate of Zn decreased from 46.9% in AMR to 0.3% in biochar obtained at 700 °C with a heating rate of 10 °C/min. This study elucidates the formation process and physicochemical properties of AMR biochar, which helps in the harmless utilization of AMR as a carbon resource.

A quantitative review of the effects of biochar application on rice yield and nitrogen use efficiency in paddy fields: A meta-analysis.

Applying biochar to paddy fields is a helpful approach that potentially increases rice production and nitrogen use efficiency (NUE) to ensure food security and protect the ecological environment. Notwithstanding, reviewing most of the previous experimental studies on the impacts of biochar reveals a considerable inconsistency in the proposed results. The present study conducts a comprehensive meta-analysis on the literature published before February 2021 to investigate the impacts of biochar properties, experimental conditions, and soil properties on rice yield and NUE. The meta-analysis results show that biochar application increases rice yield and NUE by 10.73% and 12.04%, respectively. The most significant improvements in the soil properties are seen in alkaline soils and paddy soils with a fine-textured. In addition, the benefits of biochar are significantly enhanced when produced at 500-600 °C with livestock manure due to the existence of more nutrients compared to other feedstocks. Analysis of water management reveals that biochar application under water-saving irrigation is more effective in increasing rice productivity. In terms of application rates, the >20 t/ha biochar and 150-250 kg/ha nitrogen fertilizer are recommended for improving rice yield and NUE. Regardless of existing uncertainty due to the lack of long-term experimental data, those investigated factors have significant implications for biochar management strategies in rice growth systems.

Industrial alkali lignin-derived biochar as highly efficient and low-cost adsorption material for Pb(II) from aquatic environment.

Developing a cost-effective and high-efficiency biochar is critical in various environmental applications. Lignin-based materials are natural and abundant adsorbents to heavy metals benefited from their special polyphenol structure and physicochemical properties. In this study, adsorption capacities to Pb(II) by alkali lignin (AL) and its biochar derivative (ALB) were comparatively discussed, and the latter exhibited superior adsorption performance, with a maximum adsorption capacity almost twice that of the former, and a much faster absorption rate. The qm value of ALB was significantly superior to that of other reported biochar materials. Pb(II) was mainly adsorbed into ALB in three forms: mineral precipitation, ion exchange, and surface complexation, with complexation and mineral precipitation being the dominant mechanisms of adsorption. This study demonstrates that alkali-lignin derived biochar is a promising material for the remediation of polluted by Pb(II).

Impacts of different biochar types on hydrogen production promotion during fermentative co-digestion of food wastes and dewatered sewage sludge.

Pyrolysis and anaerobic digestion are two important strategies for waste management that may be combined for clean energy production. This article investigates the effects of 12 types of biochars derived from four feedstocks at three pyrolysis temperatures on H2 production via fermentative co-digestion of food wastes and dewatered sewage sludge. The results show that feedstock type and pyrolysis temperature significantly influence biochar properties such as pH, specific surface area and ash contents. Despite the wide range of BET specific surface areas (1.2-511.3 m2/g) and ash contents (5.3-73.7(wt%)) of biochars produced, most biochars promoted the VFAs production process and altered the fermentative type from that of acetate type to butyrate type, which seemed to have a higher efficiency for H2 production. Moreover, fitting of the results to the modified Gompertz model shows that biochar addition shortens the lag time by circa 18-62% and increases the maximum H2 production rate by circa 18-110%. Furthermore, the biochar derived at higher pyrolysis temperatures enhances H2 production dramatically over those derived at low temperatures. Principal components analysis demonstrated that the pH buffering capacity of biochar was critical to the promotion of fermentative H2 production by mitigating the pH decrease caused by VFAs accumulation. Consequently, a sustainable integrated waste management strategy combining pyrolysis and anaerobic digestion is proposed for the efficient treatment of various bio-wastes.

Efficacy of biochar to remove Escherichia coli from stormwater under steady and intermittent flow.

Biofilters, designed to facilitate the infiltration of stormwater into soil, are generally ineffective in removing bacteria from stormwater, thereby causing pollution of groundwater and receiving surface waters. The bacterial removal capacity of biofilters has been shown to be lower in the presence of natural organic matter (NOM) and during intermittent infiltration of stormwater. To improve the removal of fecal indicator bacteria (Escherichia coli) under these conditions, we amended sand with 5% (by weight) biochar, a carbonaceous geomedia produced by pyrolysis of biomass, and investigated the removal and remobilization of E. coli. Three types of biochar were used to evaluate the role of biochar properties on the removal. Compared to sand, biochar not only retained up to 3 orders of magnitude more E. coli, but also prevented their mobilization during successive intermittent flows. In the presence of NOM, the removal capacity of biochar was lower, but remained higher than sand alone. The improved retention with the biochar amendment is attributed to an increase in the attachment of E. coli at the primary minimum and to an increase in the water-holding capacity of biochar-amended sand, which renders driving forces such as moving air-water interfaces less effective in detaching bacteria from grain surfaces. Biochars with lower volatile matter and polarity appear to be more effective in removing bacteria from stormwater. Overall, our results suggest that a biochar amendment to biofilter media has the potential to effectively remove bacteria from stormwater.