A Multifunctional Coating with Active Corrosion Protection Through a Synergistic pH- and Thermal-Responsive Mechanism.

This article aims to develop CeO2 nanocontainer-constructed coating with a synergistic self-healing and protective nature through a simple mechanical blending technique to manage metal corrosion. The proposed coating exhibits excellent corrosion resistance, which is primarily attributed to the combination of thermal-driven healing and active corrosion inhibition. Paraffin wax and 2-polybenzothiazole-loaded CeO2 nanotubes (CeO2-MBT) are directly doped into epoxy coating to perform such a multifunctional role. CeO2 nanocontainers and encapsulated corrosion inhibitor MBT can be released by pH triggers to achieve instant corrosion inhibition upon the surface of metal substrate. In addition, any physical defects in the coating are responsively repaired by heating incorporated paraffin wax to regain structural integrity and consequent barrier function. Corrosion protection efficiency remains sufficient even after ten cycles of damage and healing. Such a multiple-functional coating strategy provides an alternative pathway toward efficient and sustainable performance to tackle corrosion-related challenges of metal components in both short-term and long-term services.

An Evaluation of the Corrosion Inhibition Performance of Chitosan Modified by Quaternary Ammonium Salt for Carbon Steel in Stone Processing Wastewater.

Chitosan was used as the raw material. A quaternization reaction was carried out between 2,3-epoxypropyltrimethylammonium chloride and water-soluble chitosan to prepare quaternary ammonium salt water-soluble chitosan (QWSC), and its corrosion inhibition performance against the corrosion of carbon steel in stone processing wastewater was evaluated. The corrosion inhibition efficiencies of QWSC on carbon steel in stone processing wastewater were investigated through weight loss, as well as electrochemical and surface morphology characterization techniques. The results show that QWSC has superior corrosion inhibition performance for A3 carbon steel. When an amount of 60 mL·L-1 is added, the corrosion inhibition efficiency can reach 59.51%. Electrochemical research has shown that a QWSC inhibitor is a mixed-type corrosion inhibitor. The inhibition mechanisms of the QWSC inhibitor revealed that the positive charge on the surface of carbon steel in stone wastewater was conducive to the adsorption of Cl- in the medium, which produced an excessive negative charge on the metal's surface. At the same time, the quaternary ammonium cation and amino cation formed in QWSC in stone processing wastewater can be physically absorbed on the surface of A3 carbon steel, forming a thin-film inhibitor to prevent metal corrosion.

Corrosion Inhibition Properties of Corrosion Inhibitors to under-Deposit Corrosion of X65 Steel in CO2 Corrosion Conditions.

Under-deposit corrosion is widely present in the pipelines of oil and gas production, causing significant corrosion damage. In this paper, a novel electrochemical cathodic-polarization method was carried out to accelerate the formation of CaCO3 scale on a X65 steel surface in a simulated solution containing scaling ions. Subsequently, pre-scaled X65 steel was placed in a high temperature and pressure autoclave to conduct corrosion weight-loss experiments and in situ electrochemical measurements. The study mainly compared the corrosion inhibition behavior of four quaternary ammonium salt corrosion inhibitors, pyridinium quaternary salt (BPC), quinolinium quaternary salt (BQC), 8-hydroxyquinolinium quaternary salt (BHQ) and pyridinium (1-chloromethyl naphthalene) quaternary salt (1-CPN), in a simulated oilfield scale under corrosive conditions. The results of the weight-loss experiments demonstrated that the inhibition efficiencies of the corrosion inhibitors from high to low were as follows: 1-CPN < BHQ < BQC < BPC. The in situ electrochemical measurements showed that the immersion time and type of corrosion inhibitor had a pronounced influence on the corrosion and corrosion inhibition behavior of X65 steel with CaCO3 coating. It was also proved using both EIS and PC that 1-CPN shows the best inhibition performance in all. Lastly, the inhibition mechanism of corrosion inhibitors at under-deposit conditions was analyzed via a surface morphology observation of SEM.

Comprehensive evaluation of corrosion inhibition performance and ecotoxicological effect of cinchona IIa as a green corrosion inhibitor for pickling of Q235 steel.

Here, to prevent the corrosion of Q235 steel in the pickling and discover novel green corrosion inhibitors, the corrosion inhibition performance and eco-toxicity of cinchonain IIa were evaluated. Electrochemical experiments confirms that 200 mg/L cinchonain IIa reveals good corrosion inhibition performance with 94.08% on Q235 steel in HCl for 48 h. Scanning electron microscope (SEM) and atomic force microscope (AFM) observations suggest that cinchonain IIa can be firmly attached to the metal surface by forming a barrier film. The X-ray photoelectron spectroscopy (XPS) results further verify the bonding interaction between the functional groups and the steel matrix, and indicate the existence of protective film on the steel. Meanwhile, the inhibition mechanism at the molecular/atomic level is revealed through molecular dynamics simulation. Additionally, acute toxicity test shows that cinchonain IIa is a low toxic corrosion inhibitor. Moreover, the antioxidant enzyme activity experiments confirm that cinchonain IIa discloses no obvious damage to the antioxidant system of zebrafish. Overall, cinchonain IIa exhibits low potential risks to the healthy development of aquatic organisms and ecosystems. As a proven green and low toxic corrosion inhibitor, cinchonain IIa has a sustainable application in the anti-corrosion industry.

Exploring the Efficacy of Benzimidazolone Derivative as Corrosion Inhibitors for Copper in a 3.5 wt.% NaCl Solution: A Comprehensive Experimental and Theoretical Investigation.

This study focuses on the synthesis, theoretical analysis, and application of the corrosion inhibitor known as benzimidazolone, specifically 1-(cyclohex-1-enyl)-1,3-dihydro-2H-benzimiazol-2-one (CHBI). The structure of CHBI was determined by X-ray diffraction (XRD). The inhibitory properties of CHBI were investigated in a 3.5 wt.% NaCl solution on pure copper using various electrochemical techniques such as potentiodynamic polarization curves (PDPs) and electrochemical impedance spectroscopy (EIS), as well as scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), UV-visible spectroscopy, and theoretical calculations. The obtained results indicate that CHBI is an excellent inhibitor, exhibiting remarkable effectiveness with an inhibition rate of 86.49% at 10-3 M. To further confirm the extent of adsorption of the inhibitory molecule on the copper surface, density functional theory (DFT) and Monte Carlo (MC) simulation studies were conducted. The results of this study demonstrate the synthesis and characterization of CHBI as a corrosion inhibitor. The experimental and theoretical analyses provide valuable insights into the inhibitory performance of CHBI, indicating its strong adsorption on the copper surface.

Application of Biomass Corrosion Inhibitors in Metal Corrosion Control: A Review.

Corrosion is the process of damaging materials, and corrosion of metallic materials frequently results in serious consequences. The addition of corrosion inhibitors is the most effective means of preventing metal corrosion. Until now, researchers have made unremitting efforts in the research of high-efficiency green corrosion inhibitors, and research on biomass corrosion inhibitors in a class of environmentally friendly corrosion inhibitors is currently quite promising. This work presents the classification of green biomass corrosion inhibitors in detail, including plant-based corrosion inhibitors, amino acid corrosion inhibitors, and biosurfactant corrosion inhibitors, based on the advantages of easy preparation, environmental friendliness, high corrosion inhibition efficiency, and a wide application range of biomass corrosion inhibitors. This work also introduces the preparation methods of biomass corrosion inhibitors, including hydrolysis, enzymatic digestion, the heating reflux method, and microwave extraction. In addition, the corrosion inhibition mechanisms of green biomass corrosion inhibitors, including physical adsorption, chemisorption, and film-forming adsorption, and evaluation methods of biomass corrosion inhibitors are also explicitly described. This study provides valuable insights into the development of green corrosion inhibitors.

Smart Inhibition Action of Amino Acid-Modified Layered Double Hydroxide and Its Application on Carbon Steel.

Surface impregnation of concrete structures with a migrating corrosion inhibitor is a promising and non-invasive technique for increasing the lifetime of existing structures that already show signs of corrosion attack. The main requirement for inhibitors is their ability to diffuse the rebar at a sufficient rate to protect steel. The use of smart nanocontainers such as layered double hydroxides (LDH) to store corrosion inhibitors significantly increases efficiency by providing an active protection from chloride-induced corrosion. The addition of LDH to reinforced mortar can also improve the compactness and mechanical properties of this matrix. Here, we report the synthesis of a magnesium-aluminum LDH storing glutamine amino acid as a green inhibitor (labeled as Mg-Al-Gln), which can be used as a migrating inhibitor on mortar specimens. The corrosion behavior of the specimens was determined via electrochemical techniques based on measurements of corrosion potential and electrochemical impedance spectroscopy. A cell containing a 3.5% NaCl solution was applied to the mortar surface to promote the corrosion of embedded rebars. The specimens treated with Mg-Al-Gln presented an improved corrosion protection performance, exhibiting an increase in polarization resistance (Rp) compared to the reference specimens without an inhibitor (NO INH). This effect is a consequence of a double mechanism of protection/stimuli-responsive release of glutamine and the removal of corrosive chloride species from the medium.

Experimental and Computational Study on Inhibitory Effect and Adsorption Properties of N-Acetylcysteine Amino Acid in Acid Environment.

Potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) were applied to study the inhibitory effect of N-acetylcysteine (NAC) on corrosion inhibition of carbon steel in hydrochloric acid solution. N-acetylcysteine influenced the iron dissolution to a greater extent than the hydrogen evolution reaction acting as a mixed inhibitor, predominantly anodic. The charge transfer resistance (Rct) gradually increased with the inhibitor concentration. From both methods, the inhibition efficiency (IE) reached a value of 89 ± 1% and NAC adsorption followed the Temkin isotherm. The value of adsorption Gibbs energy (ΔGadso), around -35 kJ mol-1, indicated a spontaneous adsorption and mixed action mechanism, with NAC chemical adsorption prevailing over physical one. New data will be reported by the computational study, that was performed using the density functional theory (DFT) method in aqueous phase. Quantum chemical descriptors were determined by B3LYP theory level with 6-31G+(d) basis set. Metropolis Monte Carlo atomistic simulation was used to reveal the adsorption configuration and interactions between acetylcysteine molecules and the carbon steel surface. Theoretical results were consistent with the experimental data, showing that the inhibitor action mechanism consisted of mainly chemisorption of its molecules on the carbon steel surface accompanied by van der Waals forces and electrostatic interactions.

A pH-Controlled Solid Inhibitor Based on PAM Hydrogel for Steel Corrosion Protection in Wide Range pH NaCl Medium.

To provide carbon steel a long-term corrosion protection effect in NaCl solutions with different pH values, based on poly-acrylamide (PAM) and oleate imidazoline (OIM), a solid corrosion inhibitor with the properties of pH-controlled release was synthesized. SEM, FTIR and TGA results indicated that the OIM inhibitors were successfully loaded into PAM hydrogel with a high OIM encapsulation content (39.64 wt.%). The OIM release behavior from the hydrogel structure has two stages, quick release and sustained release. The pH of solutions could affect the initial release kinetics of OIM inhibitors and the diffusion path in the hydrogel structure. Weight loss measurement of L80 steel in different pH solutions with OIM@PAM proved the inhibitor responsive release mechanism and anticorrosion performance. The inhibition efficiency of OIM@PAM can maintain over 80% after long-term immersion in a harsh corrosive environment (pH 3), which is much higher than the inhibition efficiency of OIM@PAM in a moderate corrosive solution.

Unraveling Bonding Mechanisms and Electronic Structure of Pyridine Oximes on Fe(110) Surface: Deeper Insights from DFT, Molecular Dynamics and SCC-DFT Tight Binding Simulations.

The development of corrosion inhibitors with outstanding performance is a never-ending and complex process engaged in by researchers, engineers and practitioners. The computational assessment of organic corrosion inhibitors' performance is a crucial step towards the design of new task-specific materials. Herein, the electronic features, adsorption characteristics and bonding mechanisms of two pyridine oximes, namely 2-pyridylaldoxime (2POH) and 3-pyridylaldoxime (3POH), with the iron surface were investigated using molecular dynamics (MD), and self-consistent-charge density-functional tight-binding (SCC-DFTB) simulations. SCC-DFTB simulations revealed that the 3POH molecule can form covalent bonds with iron atoms in its neutral and protonated states, while the 2POH molecule can only bond with iron through its protonated form, resulting in interaction energies of -2.534, -2.007, -1.897, and -0.007 eV for 3POH, 3POH+, 2POH+, and 2POH, respectively. Projected density of states (PDOSs) analysis of pyridines-Fe(110) interactions indicated that pyridine molecules were chemically adsorbed on the iron surface. Quantum chemical calculations (QCCs) revealed that the energy gap and Hard and Soft Acids and Bases (HSAB) principles were efficient in predicting the bonding trend of the molecules investigated with an iron surface. 3POH had the lowest energy gap of 1.706 eV, followed by 3POH+ (2.806 eV), 2POH+ (3.121 eV), and 2POH (3.431 eV). In the presence of a simulated solution, MD simulation showed that the neutral and protonated forms of molecules exhibited a parallel adsorption mode on an iron surface. The excellent adsorption properties and corrosion inhibition performance of 3POH may be attributed to its low stability compared to 2POH molecules.

Corrosion Inhibition in CO2-Saturated Brine by Nd3+ Ions.

This study reports the use of an inorganic corrosion inhibitor to mitigate dissolved CO2-induced corrosion. Using electrochemical techniques (polarization curves, open circuit potential, polarization resistance, and electrochemical impedance), the effect of adding Nd3+ ions on the corrosion resistance of X52 steel immersed in CO2-saturated brine at 20 °C and 60 °C was evaluated. The polarization curves showed that the Icorr values tend to decrease with increasing Nd3+ ion concentration, up to the optimal inhibition concentration, and that the corrosion potential increases at nobler values. Open circuit potential measurements showed a large increase in potential values immediately after the addition of the Nd3+ ions. Similarly, polarization resistance measurements showed similar trends. It was observed that regardless of temperature, Nd3+ ions can reduce the corrosion rate by more than 97% at doses as low as 0.001 M. Electrochemical impedance measurements confirmed the formation of a protective layer on the steel surface, which caused an increase in the magnitude of the impedance module and phase angle, which indicates an increase in the resistance to charge transfer and capacitive properties of the metallic surface. The characterization of the metallic surface showed that the protective layer was formed by Nd carbonates, whose formation was due to a CO2 capture process.

A Superior Corrosion Protection of Mg Alloy via Smart Nontoxic Hybrid Inhibitor-Containing Coatings.

The increase of corrosion resistance of magnesium and its alloys by forming the smart self-healing hybrid coatings was achieved in this work in two steps. In the first step, using the plasma electrolytic oxidation (PEO) treatment, a ceramic-like bioactive coating was synthesized on the surface of biodegradable MA8 magnesium alloy. During the second step, the formed porous PEO layer was impregnated with a corrosion inhibitor 8-hydroxyquinoline (8-HQ) and bioresorbable polymer polycaprolactone (PCL) in different variations to enhance the protective properties of the coating. The composition, anticorrosion, and antifriction properties of the formed coatings were studied. 8-HQ allows controlling the rate of material degradation due to the self-healing effect of the smart coating. PCL treatment of the inhibitor-containing layer significantly improves the corrosion and wear resistance and retains an inhibitor in the pores of the PEO layer. It was revealed that the corrosion inhibitor incorporation method (including the number of steps, impregnation, and the type of solvent) significantly matters to the self-healing mechanism. The hybrid coatings obtained by a 1-step treatment in a dichloromethane solution containing 6 wt.% polycaprolactone and 15 g/L of 8-HQ are characterized by the best corrosion resistance. This coating demonstrates the lowest value of corrosion current density (3.02 × 10-7 A cm-2). The formation of the hybrid coating results in the corrosion rate decrease by 18 times (0.007 mm year-1) as compared to the blank PEO layer (0.128 mm year-1). An inhibitor efficiency was established to be 83.9%. The mechanism of corrosion protection of Mg alloy via smart hybrid coating was revealed.

Novel use of kitchen waste: protection of boiler quality steel from corrosion in acidic media using onion waste.

An eco-friendly approach to inhibit the corrosion of boiler quality (BQ) steel by onion waste in acidic media was investigated. The extract from onion peel was characterized using the conventional extraction method and was characterized using HPLC. The efficacy of the onion peel extract (OPE) as a green corrosion inhibitor was studied using the weight loss method and a variety of electrochemical techniques, including open-circuit potential (OCP), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS). The Tafel polarization revealed that at 200 mg L-1 of onion peel extract (OPE), corrosion current density was reduced maximum in both 1 (M) HCl and 0.5 (M) H2SO4 media. From the electrochemical impedance spectroscopy studies, the maximum inhibition efficiencies of 91.30% and 90.71% were found at 200 mg L-1 in 1 (M) HCl and 0.5 (M) H2SO4, respectively. The Langmuir isotherm was determined to be the best-fitting model, and the thermodynamic parameter, such as free energy Δ G ads ∘ , was computed, which indicated the physisorption of OPE onto the BQ surface. In theoretical investigations, density functional theory DFT was used to determine the adsorption efficiency and reactive sites of the OPE molecule by exploring various quantum chemical parameters. Supplementary Information: The online version contains supplementary material available at 10.1007/s11696-022-02549-7.

Environmentally benign cinchonain IIa from Uncaria laevigata for corrosion inhibition of Q235 steel in HCl corrosive medium: Experimental and theoretical investigation.

Traditional corrosion inhibitors make great contribution to metal protection, but also cause environmental pollution. To solve the problem, plant extracts as green corrosion inhibitors have attracted much attention in recent years. Plants are good raw materials for corrosion inhibitors and also meet the requirements of industry. However, they have not been successfully applied in industry due to the unknown composition of the effective corrosion inhibitors and large dosage thereof. Therefore, cinchonain IIa was separated from Uncaria laevigata with abundant sources and low cost from nature in this work. Here we hypothesized that cinchonain IIa could show good corrosion inhibition performance for Q235 steel in the acidic medium. Through experiments and theoretical calculation, we studied the corrosion inhibition effect of cinchonain IIa on Q235 in 1 M HCl solution at 298 K for 48 h. Electrochemical experiments revealed that the inhibition efficiency of 200 mg/L cinchonain IIa in 1 M HCl for Q235 steel was 94.08% for 48 h. It even showed over 93% corrosion inhibition efficiency and durable protection performance to 28 d. Surface observations indicated that cinchonain IIa were firmly attached to the steel surface by forming a protective film. Moreover, quantum chemical calculation and molecular dynamics simulation revealed the inhibition mechanism at molecular and atomic level. Compared with some plant extracts, here we demonstrate that the outstanding advantages of cinchonain IIa include sustained protective effect, small dosage, and low toxicity. Accordingly, it may be used as a green industrial corrosion inhibitor with great potential in oilfield acidification and acid pickling.

Experimental and Quantum Chemical Investigations on the Anticorrosion Efficiency of a Nicotinehydrazide Derivative for Mild Steel in HCl.

A corrosion inhibitor namely N'-(4-hydroxy-3-methoxybenzylidene) nicotinohydrazide was synthesized and the inhibition efficiency of the investigated inhibitor toward the mild steel corrosion in 1 M HCl was studied. The anticorrosion effect has been investigated by weight loss (WL) techniques and electrochemical analysis includes potentiodynamic polarization (PDP) studies and electrochemical impedance spectroscopy (EIS). The current investigation has demonstrated that the tested inhibitor is suitable in corrosive environment and the inhibitive efficacy up to 97% in 1 M HCl. PDP measurements showed that the nicotinohydrazide is a mixed type inhibitor. EIS measurements showed that an increase in the inhibitory concentration leads to an increase in the charge transfer resistance (Rct) and a decrease in the double-layer capacitance (Cdl). Experimental results for the inhibitory performance of WL methods and electrochemical techniques (PDP and EIS) are in good agreement. The tested inhibitor molecules adsorbed on the surface of mild steel in a hydrochloric acid solution followed Langmuir's isothermal adsorption. Quantum chemical parameters based on density function theory (DFT) techniques were conducted on oxygen/nitrogen-bearing heterocyclic molecule employed as a corrosion inhibitor for mild steel in HCl to evaluate the correlation between the inhibitor structure and inhibitory performance. The parameters including the energy gap (ΔE), dipole moment (µ), electronegativity (χ), electron affinity (A), global hardness (η), softness (σ), ionization potential (I), the fraction of electrons transferred (ΔN), the highest occupied molecular orbital energy (EHOMO), and the lowest unoccupied molecular orbital energy (ELUMO) were also calculated and were in good agreement with the experimental results.

An Eco-Friendly Quaternary Ammonium Salt as a Corrosion Inhibitor for Carbon Steel in 5 M HCl Solution: Theoretical and Experimental Investigation.

The corrosion of industrial material is a costly problem associated with global economic losses reaching trillions of US dollars in the repair of failures. Injecting corrosion inhibitors is the most practically promising method for decelerating corrosion reactions and protecting surfaces. Recent investigations have focused on surfactants as corrosion inhibitors due to their amphiphilic nature, low cost, and simple chemical preparation procedures. This study aims to investigate the performance of an environment-friendly Quaternium-22 (Q-22) surfactant which is widely used in cosmetics for C-steel corrosion inhibition in a 5 M HCl medium. Weight loss experiments were performed at different concentrations and immersion times, presenting a maximum efficiency at 2.22 mmol·L-1. The influence of Q-22 on the corrosion behavior of C-steel was elucidated using non-destructive electrochemical measurements. The overall results revealed that adding varied concentrations of Q-22 significantly decreases the corrosion rate of C-steel. The results revealed the physisorption nature of Q-22 onto the C-steel surface, with adsorption following the Freundlich isotherm (∆Hads= -16.40 kJ·mol-1). The relative inhibition performance of Q-22 was also evaluated by SEM and AFM analyses. Lastly, quantum chemical calculations based on density functional theory (DFT) demonstrated that Q-22 has promising molecular features concerning the anticorrosive mechanism.

A Brief Review on Fruit and Vegetable Extracts as Corrosion Inhibitors in Acidic Environments.

The corrosion of metals, i.e., the initiation and acceleration of the surface deterioration of metals through an electrochemical reaction with the surrounding intrusive environment, is a global concern because of the economic and environmental impacts. Corrosion inhibitors are considered the most practical choice among the available corrosion protection techniques due to their effectiveness in terms of functionality and cost. The use of traditional and toxic corrosion inhibitors has led to environmental issues, arousing the need for green counterparts that are environmentally friendly, easily accessible, biodegradable, and cost-effective. In this review, the utilization of green corrosion inhibitors purely acquired from renewable sources is explored, with an in-depth focus on the recent advancements in the use of fruit and vegetable extracts as green corrosion inhibitors. In particular, fruits and vegetables are natural sources of various phytochemicals that exhibit key potential in corrosion inhibition. To shed light on the true potential of such extracts in the protection of steel in acidic environments, the experimental techniques involved in corrosion inhibition and the mechanism of corrosion inhibition are discussed in detail. The study highlights the potential of fruit and vegetable extracts as non-toxic, economical, and effective corrosion inhibitors in the pursuit of green chemistry. In addition to discussing and outlining the current status and opportunities for employing fruit and vegetable extracts as corrosion inhibitors, the current review outlines the challenges involved in the utilization of such extracts in corrosion inhibition.

Corrosion Inhibition of Mild Steel in Hydrochloric Acid Environment Using Terephthaldehyde Based on Schiff Base: Gravimetric, Thermodynamic, and Computational Studies.

Using traditional weight-loss tests, as well as different electrochemical techniques (potentiodynamic polarization and electrochemical impedance spectroscopy), we investigated the corrosion-inhibition performance of 2,2'-(1,4-phenylenebis(methanylylidene)) bis(N-(3-methoxyphenyl) hydrazinecarbothioamide) (PMBMH) as an inhibitor for mild steel in a 1 M hydrochloric acid solution. The maximum protection efficacy of 0.0005 M of PMBMH was 95%. Due to the creation of a protective adsorption layer instead of the adsorbed H2O molecules and acidic chloride ions, the existence of the investigated inhibitor reduced the corrosion rate and increased the inhibitory efficacy. The inhibition efficiency increased as the inhibitor concentration increased, but it decreased as the temperature increased. The PMBMH adsorption mode followed the Langmuir adsorption isotherm, with high adsorption-inhibition activity. Furthermore, the value of the ∆Gadso indicated that PMBMH contributed to the physical and chemical adsorption onto the mild-steel surface. Moreover, density functional theory (DFT) helped in the calculation of the quantum chemical parameters for finding the correlation between the inhibition activity and the molecular structure. The experimental and theoretical findings in this investigation are in good agreement.

Cucumber (Cucumis sativus L.) Leaf Extract as a Green Corrosion Inhibitor for Carbon Steel in Acidic Solution: Electrochemical, Functional and Molecular Analysis.

An extract of cucumber leaves (ECSL) was prepared as a green corrosion inhibitor for carbon steel. Its carbon steel corrosion inhibition performance against 0.5 mol L-1 H2SO4 was investigated using electrochemical methods and scanning electron microscopy (SEM). Its composition was analyzed by gas chromatography and mass spectroscopy (GC-MS). Quantum chemical calculations and molecular dynamics simulations (MDS) were conducted to elucidate the adsorption mechanism of the inhibitor molecules on the carbon steel surface. The results indicated that the inhibition efficiency increases with its increasing concentration. The extract acted as a mixed type corrosion inhibitor, and its inhibition properties were ascribed to the geometric coverage effect induced by its adsorption on the metal surface in accordance with Langmuir's law. The active components in the extract were identified as mainly organic compounds with functional groups such as aromatic moieties and heteroatoms. The inhibition activities of ECSL are delivered through the ability of the active components to adsorb on the metal surface through their functional groups to form a protective layer which hinders the contact of aggressive substances with carbon steel and thus suppresses its corrosion. This research provides an important reference for the design of green corrosion inhibitors based on plant waste materials.

Sodium Succinate as a Corrosion Inhibitor for Carbon Steel Rebars in Simulated Concrete Pore Solution.

The inhibiting performance of sodium succinate (Na2C4H4O4) was evaluated as an organic environmentally friendly corrosion inhibitor for carbon steel rebars in 0.6 M Cl- simulated concrete pore solution. Potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) measurements were utilized to evaluate the inhibitor performance at different temperatures and concentrations. The investigated corrosion inhibitor showed strong corrosion inhibition performance as it adsorbs on the surface of the rebar, creating a protective adsorption film. According to PDP, the inhibitor is classified as a mixed-type inhibitor with an inhibitor efficiency of 77, 69, 59, and 54% for 25, 35, 45, and 55 °C, respectively. EIS validated the PDP tests, showing that sodium succinate displaces the water molecules at the interface, creating an adsorption film by complexing with ferrous ions. The film thickness was calculated, and sodium succinate was able to produce a thicker protective film (span of nanometers) relative to the reference at every temperature. The adsorption of sodium succinate follows the Temkin adsorption isotherm. ΔG0ads was found to be -32.75 kJ/mol, indicating that the inhibitor adsorption is a combined physisorption and chemisorption process. Different surface characterizations were utilized to substantiate the adsorption of sodium succinate, these include scanning electron microscopy, energy-dispersive X-ray spectroscopy, and micro-Raman spectroscopy. Finally, quantum chemical calculations showed that the delocalized electrons in the carboxyl group have high HOMO energies and electrostatic potential, which facilitates the adsorption of sodium succinate corrosion inhibitor onto the carbon steel rebar surface.