Cranial Repair in Children: Techniques, Materials, and Peculiar Issues.

Cranial repair in children deserves particular attention since many issues are still controversial. Furthermore, literature data offer a confused picture of outcome of cranioplasty, in terms of results and complication rates, with studies showing inadequate follow-up and including populations that are not homogeneous by age of the patients, etiology, and size of the bone defect.Indeed, age has merged in the last years as a risk factor for resorption of autologous bone flap that is still the most frequent complication in cranial repair after decompressive craniectomy.Age-related factors play a role also when alloplastic materials are used. In fact, the implantation of alloplastic materials is limited by skull growth under 7 years of age and is contraindicated in the first years if life. Thus, the absence of an ideal material for cranioplasty is even more evident in children with a steady risk of complications through the entire life of the patient that is usually much longer than surgical follow-up.As a result, specific techniques should be adopted according to the age of the patient and etiology of the defect, aiming to repair the skull and respect its residual growth.Thus, autologous bone still represents the best option for cranial repair, though limitations exist. As an alternative, biomimetic materials should ideally warrant the possibility to overcome the limits of other inert alloplastic materials by favoring osteointegration or osteoinduction or both.On these grounds, this paper aims to offer a thorough overview of techniques, materials, and peculiar issues of cranial repair in children.

Letter to editor: Exploring complications following cranioplasty after decompressive hemicraniectomy: A retrospective bicenter assessment of autologous, PMMA and CAD implants.

This study presents a critical analysis of complications following cranioplasty (CP) after decompressive hemicraniectomy, focusing on autologous, polymethylmethacrylate (PMMA), and computer-aided design (CAD) implants. The analysis encompasses a retrospective bicenter assessment, evaluating factors influencing surgical outcomes and emphasizing the significance of material selection in minimizing postoperative complications. The study's comprehensive examination of complication rates associated with various implant materials contributes significantly to understanding CP outcomes. While polymethylmethacrylate (PMMA) and autologous bone flaps (ABFs) exhibited higher rates of surgical site infection (SSI) and explantation, a meta-analysis revealed a contrasting lower infection rate for polyether ether ketone (PEEK) implants. The study underscores the critical role of material selection in mitigating postoperative complications. Despite its strengths, the study's retrospective design, reliance on data from two centers, and limited sample size pose limitations. Future research should prioritize prospective, multicenter studies with standardized protocols to enhance diagnostic accuracy and treatment efficacy in CP procedures.

Exploring complications following cranioplasty after decompressive hemicraniectomy: A retrospective bicenter assessment of autologous, PMMA and CAD implants.

Cranioplasty (CP) after decompressive hemicraniectomy (DHC) is a common neurosurgical procedure with a high complication rate. The best material for the repair of large cranial defects is unclear. The aim of this study was to evaluate different implant materials regarding surgery related complications after CP. Type of materials include the autologous bone flap (ABF), polymethylmethacrylate (PMMA), calcium phosphate reinforced with titanium mesh (CaP-Ti), polyetheretherketone (PEEK) and hydroxyapatite (HA). A retrospective, descriptive, observational bicenter study was performed, medical data of all patients who underwent CP after DHC between January 1st, 2016 and December 31st, 2022 were analyzed. Follow-up was until December 31st, 2023. 139 consecutive patients with a median age of 54 years who received either PMMA (56/139; 40.3%), PEEK (35/139; 25.2%), CaP-Ti (21/139; 15.1%), ABF (25/139; 18.0%) or HA (2/139; 1.4%) cranial implant after DHC were included in the study. Median time from DHC to CP was 117 days and median follow-up period was 43 months. Surgical site infection was the most frequent surgery-related complication (13.7%; 19/139). PEEK implants were mostly affected (28.6%; 10/35), followed by ABF (20%; 5/25), CaP-Ti implants (9.5%; 2/21) and PMMA implants (1.7%, 1/56). Explantation was necessary for 9 PEEK implants (25.7%; 9/35), 6 ABFs (24.0%; 6/25), 3 CaP-Ti implants (14.3%; 3/21) and 4 PMMA implants (7.1%; 4/56). Besides infection, a postoperative hematoma was the most common cause. Median surgical time was 106 min, neither longer surgical time nor use of anticoagulation were significantly related to higher infection rates (p = 0.547; p = 0.152 respectively). Ventriculoperitoneal shunt implantation prior to CP was noted in 33.8% (47/139) and not significantly associated with surgical related complications. Perioperative lumbar drainage, due to bulging brain, inserted in 38 patients (27.3%; 38/139) before surgery was protective when it comes to explantation of the implant (p = 0.035). Based on our results, CP is still related to a relatively high number of infections and further complications. Implant material seems to have a high effect on postoperative infections, since surgical time, anticoagulation therapy and hydrocephalus did not show a statistically significant effect on postoperative complications in this study. PEEK implants and ABFs seem to possess higher risk of postoperative infection. More biocompatible implants such as CaP-Ti might be beneficial. Further, prospective studies are necessary to answer this question.

Free bone flap reconstruction in retrosigmoid approach for microvascular decompression: a comparative cohort study.

Titanium plates and screws are common material used for rigid bone flap fixation after retrosigmoid craniotomy such as microvascular decompression (MVD). We conducted this study to evaluate outcomes of the free bone flap cranioplasty without fixation in MVD and compared its postoperative complication rate with routine methods. We retrospectively reviewed all patients who underwent MVD at our institution from May 2017 to August 2022. Patients were divided into two groups according to whether the bone flap was fixed or not. Follow-ups periods spanned 6-28 months after the operation. Of 189 patients who underwent MVDs via retrosigmoid approach, 79 cases (42%) had their bone flaps replaced without titanium fixation after craniotomies (< 3 cm x 3 cm). Compared to fixed bone flap group, free bone flap group had shorter operative time (105.56 ± 15.87 min vs. 113.72 ± 17.80 min, P = 0.001), less in-patient costs (¥23059.66 ± 4488.54 vs. ¥27714.82 ± 2705.74, P < 0.001), and less proportion of postoperative headache and incisional pain (43.0% vs. 60.9%, P = 0.015). One case of incisional cerebrospinal fluid leak happened in free bone flap group while one case of incisional infection happened in fixed bone flap group. No statistical difference in bone flap displacement, duration of postoperative hospital stays or complication rate was found between the two groups. Nineteen patients in free bone flap group received long-term CT follow-up and all were proved to have good skull union. This study proves that free bone flap cranioplasty in MVD without titanium plate fixation can shorten the operation time and reduce hospitalization expenditure without increasing complication rates.

Customised pre-operative cranioplasty to achieve maximal surgical resection of tumours with osseous involvement-a case series.

PURPOSE: Surgical resection with bony margins would be the treatment of choice for tumours with osseous involvement such as meningiomas and metastasis. By developing and designing pre-operative customised 3D modelled implants, the patient can undergo resection of meningioma and repair of bone defect in the same operation. We present a generalisable method for designing pre-operative cranioplasty in patients to repair the bone defect after the resection of tumours. MATERIALS AND METHODS: We included six patients who presented with a tumour that was associated with overlying bone involvement. They underwent placement of customised cranioplasty in the same setting. A customised implant using a pre-operative imaging was designed with a 2-cm margin to allow for any intra-operative requirements for extending the craniectomy. RESULTS: Six patients were evaluated in this case series. Four patients had meningiomas, 1 patient had metastatic breast cancer on final histology, and 1 patient was found to have an intra-osseous arteriovenous malformation. Craniectomy based on margins provided by a cutting guide was fashioned. After tumour removal and haemostasis, the cranioplasty was then placed. All patients recovered well post-operatively with satisfactory cosmetic results. No wound infection was reported in our series. CONCLUSION: Our series demonstrate the feasibility of utilising pre-designed cranioplasty for meningiomas and other tumours with osseous involvement. Following strict infection protocols, minimal intra-operative handling/modification of the implant, and close follow-up has resulted in good cosmetic outcomes with no implant-related infections.

Three-dimensional personalized porous polyethylen cranioplasty in patients at increased risk of surgical site infection.

BACKGROUND: Surgical site infection (SSI) is the most consistently reported complication of cranioplasty. No material showed a categorical superiority in the incidence of infection. Porous polyethylene (PE) is considered a low risk material regarding SSI. However, the literature data are very limited. Thus, our objective was to verify the assumed low incidence of SSI after PE cranioplasty in patients at high risk of SSI. The primary objective was the infection rate, while secondary objectives were implant exposure, revision and cosmetic results. METHOD: Patients who underwent three-dimensional (3D) personalized PE cranioplasty in the period 2014-2023 were evaluated prospectively. Only patients with an increased risk of SSI, and a satisfactory clinical conditions were included in the study. RESULTS: Thirty procedures were performed in 30 patients. Cranioplasty was performed 23 times after hemispheric decompressive craniectomy, five times after limited size craniotomy and two times after bifrontal decompressive craniectomy. Risk factors for the development of infection were 18 previous SSIs, 16 previous repeated revision surgeries, four intraoperatively opened frontal sinuses and two times radiotherapy. Neither infection nor implant exposure was detected in any patient. All patients were satisfied with the aesthetic result. In two cases, a revision was performed due to postoperative epidural hematoma. CONCLUSIONS: Three-dimensional personalized PE cranioplasty is associated with an extremely low incidence of SSI even in high-risk patients. However, our conclusions can only be confirmed in larger studies.

Cryopreserved bone flaps from decompressive craniectomies: a microbiological analysis.

PURPOSE: Surgical site infection (SSI) is a serious complication after cranioplasty. Due to the relatively frequent occurrence of post-cranioplasty SSI, the utility of autologous bone flap swab cultures surrounding cryopreservation as a reliable predictor has been the subject of an ongoing debate. This bicentric study aims to contribute to this topic by conducting an in-depth analysis of bone flaps obtained via decompressive craniectomies. This study had three major aims: assessments of 1) bacterial contamination of bone flaps after decompressive craniotomy, 2) impact of cryoconservation on contamination rates and 3) potential effectiveness of anti-infective treatment to reduce the germ load prior to cranioplasty. METHODS: Cryopreserved bone flaps from two centers were used. Microbiological cultivations of swabs prior to and after cryopreservation were taken and assessed for aerobic and anaerobic growth over a 14-day incubation period. Additionally, in a subset of bone flaps, swab testing was repeated after thorough rinsing with an anti-infectant (octenidine-phenoxyethanol) followed by saline. RESULTS: All 63 bone flaps (patients median age at surgery: 59 years) were obtained via decompressive craniectomies. Swabs done prior to cryopreservation revealed a 54% infection rate with Propionibacterium acnes being the most common microorganism in 65% of those cases. After thorough disinfection of the preserved bone flaps, all but one case showed no bacterial growth in swab testing. Furthermore, no relevant risk factors for bacterial contamination could be identified. CONCLUSION: This retrospective study showed the common presence of bacterial growth in cryopreserved bone flaps before and after freezing. Rinsing with octenidine-phenoxyethanol and saline effectively prevented bacterial growth in a notable percentage of cases, suggesting a potential strategy to reduce contamination. However, persistent bacterial growth in some cases underscores the need for further research to optimize antiseptic measures during autologous cranioplasty.

The role of autologous bone in cranioplasty. A systematic review of complications and risk factors by using stored bone.

BACKGROUND: Autologous bone cranioplasty is associated with a high complication rate, particularly infections and bone resorption. Although there are studies on the incidence and risk factors for complications following autologous bone cranioplasty, the study design is typically limited to retrospective analysis with multiple statistical explorations in small cohorts from single centers. Thus, there is a need for systematic analysis of aggregated data to determine the rate and risk factors for cranioplasty complications. OBJECTIVE: To determine the incidence and risk factors for complications after autologous bone cranioplasty. METHODS: In this systemic review, we conducted a Medline, Embase, Cochrane, and Web of Science search: 11,172 papers were identified. Duplicates were removed and only articles on complications following autologous bone cranioplasty between the years 2000 and 2022 were included. After title, abstract, and article screening, 132 papers were included for further analysis. RESULTS: In total, the 132 studies are based on 13,592 patients (14960 implants). One third of the studies include patients with less than 3 months of postoperative follow-up. Complication management (flap removal, revision without flap removal, and conservative treatment) of infection, bone resorption, and hematoma/seromas are not reported in 19-30% of the studies. In the studies with defined complications management, the overall complication rate is 7.6% (95% Confidence Interval (CI) [7.1-8.2]) for infection, 14.4% (95% CI [13.7-15.2]) for bone resorption with indication for reconstruction, and 5.8%, (95% CI 5.2-6.5) for hematoma/seromas. Factors such as younger age, an extended interval between craniectomy and cranioplasty, the use of a fragmented bone implant, a larger implant size, and shunt treatment are linked to an increased risk of postoperative bone resorption. CONCLUSION: The lack of consistent definitions of complications, variations in follow-up time, and small study cohorts limit the external validity of many studies. Overall, the rate of bone flap resorption that required reoperation is high, while the rate of infectious complications is comparable to synthetic implants. Thus, autologous bone should preferably be used in cases without strong risk factors for bone necrosis.

How I do it: single-staged emergency neurosurgical management of frontal penetrating craniocerebral injury with depressed skull fracture.

CONTEXT: Penetrating craniocerebral injury associated with depressed skull fracture is an infrequent yet timely neurosurgical emergency. Such injury frequently occurs in the frontal region during traffic accident or stone throw in the civilian setting. As military neurosurgeons, we present our experience in the surgical debridement and reconstruction of this peculiar type of traumatic brain injury. METHODS: The patient lies supine, the head in neutral position heal by a Mayfield head clamp. The first step is the debridement of the frontal wound. Then, the depressed skull fracture is operated on using a tailored coronal approach through Merkel dissection plane, in order to keep a free pericranial flap. The bone flap is cut around the depressed skull fracture. Neuronavigation allows to locate the frontal sinus depending on whether it has been breached and thus requires cranialization. Brain and dura mater debridement and plasty are performed. Cranioplasty is performed using either native bone fragments fixed with bone plates or tailored titanium plate if they are too damaged. CONCLUSION: Performing wounded skin closure first and then a tailored coronal approach with free pericranial flap and a craniotomy encompassing the depressed skull fracture allows to treat frontal penetrating craniocerebral injury in an easy-to-reproduce manner.

Complication rates after autologous cranioplasty following decompressive craniectomy.

OBJECTIVE: The reimplantation of autologous bone grafts after decompressive craniectomy (DC) is still up for debate. The objective of this study was to analyze the surgical revision rate for autologous cranioplasties in our center, aiming to identify predictors for procedure-related-complications. METHODS: A retrospective single-center study was conducted for adult patients who underwent autologous cranioplasty after DC. The primary endpoint was the complication rate in terms of surgical revision and removal of the bone graft: infection, new onset seizures, dislocation, haemorrhage, osteolysis, wound dehiscence and cerebrospinal fluid (CSF) fistula. Demographic data, medical records, surgical reports and imaging studies were analysed and risk factors for complications were evaluated. RESULTS: 169 consecutive patients were included. The median interval between DC and cranioplasty was 84 days. Mean age was 51 ± 12.4 years. 26 patients (15.3%) had revision surgery for following reasons. n = 9 implant dislocations (5.3%), n = 7 osteolysis (3.6%), n = 6 infections (3.6%), n = 5 had re-bleedings (3%), n = 5 wound dehiscences (3%), and n = 2 CSF fistulas (1.2%). 18 patients developed new seizures (10.7%). Bi- and multivariate analysis revealed three independent risk factors, simultaneous ventriculo-peritoneal (VP) shunting increased the risk for material dislocation (p < 0.001); large bone grafts (> 193.5 cm2) increased the risk for osteolysis (p = 0.001) and bifrontal cranioplasties were associated with higher risk for infections (p = 0.04). CONCLUSION: The complication rates in our study were comparable to previously reported data for autologous or artificial cranioplasties. As osteolysis was correlated to larger bone grafts, a synthetic alternative should be considered in selected cases.

Assessment of cranial reconstruction utilizing various implant materials: finite element study.

The human head can sometimes experience impact loads that result in skull fractures or other injuries, leading to the need for a craniectomy. Cranioplasty is a procedure that involves replacing the removed portion with either autologous bone or alloplastic material. While titanium has traditionally been the preferred material for cranial implants due to its excellent properties and biocompatibility, its limitations have prompted the search for alternative materials. This research aimed to explore alternative materials to titanium for cranial implants in order to address the limitations of titanium implants and improve the performance of the cranioplasty process. A 3D model of a defective skull was reconstructed with a cranial implant, and the implant was simulated using various stiff and soft materials (such as alumina, zirconia, hydroxyapatite, zirconia-reinforced PMMA, and PMMA) as alternatives to titanium under 2000N impact forces. Alumina and zirconia implants were found to reduce stresses and strains on the skull and brain compared to titanium implants. However, PMMA implants showed potential for causing skull damage under current loading conditions. Additionally, PMMA and hydroxyapatite implants were prone to fracture. Despite these findings, none of the implants exceeded the limits for tensile and compressive stresses and strains on the brain. Zirconia-reinforced PMMA implants were also shown to reduce stresses and strains on the skull and brain compared to PMMA implants. Alumina and zirconia show promise as alternatives to titanium for the production of cranial implants. The use of alternative implant materials to titanium has the potential to enhance the success of cranial reconstruction by overcoming the limitations associated with titanium implants.

Improved rehabilitation efficiency after cranioplasty in patients with sunken skin flap syndrome: a case series.

PURPOSE: Sunken Skin Flap Syndrome (SSFS) is an uncommon, delayed complication after craniectomy characterized by a functional plateau or decline with variable neurologic symptoms, improving after cranioplasty. SSFS negatively impacts the rehabilitation course, with subjective reports of functional improvement after cranioplasty. However, no studies have assessed the impact of cranioplasty on functional recovery rate. This case series aims to analyze SSFS manifestations and management while awaiting cranioplasty. Also, to assess the role of cranioplasty on rehabilitation outcomes and recovery rate in SSFS patients. METHODS: Four patients were identified with SSFS in inpatient rehabilitation. Each patient had unique clinical manifestations, with multiple strategies used for symptomatic control. Patients spent an average of 23 days in rehabilitation with SSFS symptoms before cranioplasty. After cranioplasty, all patients had SSFS symptom resolution. Comparing change in functional independence measure (FIM) scores and FIM efficiency pre-and post-cranioplasty rehabilitation course, a mean improvement of 23 and 0.72 occurred after cranioplasty, respectively. CONCLUSION: A diagnosis of SSFS should be considered in craniectomy patients exhibiting functional decline or plateau with associated neurological symptoms. This study suggests that FIM and FIM efficiency increases in SSFS patients after cranioplasty, supporting prompt cranioplasty to improve functional outcomes and minimize rehabilitation delays.

Reduction Cranioplasty in Cases of Hydrocephalic Macrocephaly: Pearls and Pitfalls of Computer-Assisted Surgery.

Reduction cranioplasty may be indicated to address functional or cosmetic sequelae of hydrocephalic macrocephaly. With the advent of CAD/CAM digital workflow, surgeons can design and fabricate craniotomy guides, templates, and models that allow for precise cranial reconstruction. Although there are several advantages of virtual planning, pre-determined surgical plans may limit intraoperative flexibility, requiring surgeons to troubleshoot errors in pre-operative planning or model design. The purpose of this report is to present a series of cases demonstrating our institution's technique for single-stage reduction cranioplasty using a CAD/CAM workflow. This report will highlight the benefits and challenges associated with a contemporary digital workflow for reduction cranioplasty.

Back to the Roots: Reconstructing Large and Complex Cranial Defects using an Image-based Statistical Shape Model.

Designing implants for large and complex cranial defects is a challenging task, even for professional designers. Current efforts on automating the design process focused mainly on convolutional neural networks (CNN), which have produced state-of-the-art results on reconstructing synthetic defects. However, existing CNN-based methods have been difficult to translate to clinical practice in cranioplasty, as their performance on large and complex cranial defects remains unsatisfactory. In this paper, we present a statistical shape model (SSM) built directly on the segmentation masks of the skulls represented as binary voxel occupancy grids and evaluate it on several cranial implant design datasets. Results show that, while CNN-based approaches outperform the SSM on synthetic defects, they are inferior to SSM when it comes to large, complex and real-world defects. Experienced neurosurgeons evaluate the implants generated by the SSM to be feasible for clinical use after minor manual corrections. Datasets and the SSM model are publicly available at https://github.com/Jianningli/ssm .

Comprehensive comparative study of Chiari-like malformation in veterinary and human medicine.

This review aims to enrich our understanding of Chiari-like malformation (CLM) by combining human and veterinary insights, and providing a detailed cross-species overview. CLM is a developmental abnormality characterised by caudal displacement of the hindbrain into the foramen magnum due to an entire brain parenchymal shift caused by insufficient skull volume. This malformation leads to a progressive obstruction at the craniocervical junction, which disrupts the normal cerebrospinal fluid flow, leading to secondary syringomyelia. The clinical signs of CLM and syringomyelia include phantom scratching, head tilt, head tremor, ataxia, tetraparesis, pain, muscle atrophy, and scoliosis or torticollis. Magnetic resonance imaging remains the gold standard for diagnosing CLM, since it allows the visualisation of abnormal findings such as the caudal cerebellar herniation, caudal cerebellar compression from occipital dysplasia, and attenuated cerebrospinal fluid cisternae. Although various medical and surgical interventions, including foramen magnum decompression, can provide temporary symptomatic/clinical sign relief, current literature shows a lack of sustained long-term efficacy. Therefore, additional research is needed to evaluate the long-term effects of existing treatment strategies and to compare different techniques utilised in conjunction with foramen magnum decompression.

Treatment of wound infections linked to neurosurgical implants.

As neurosurgery has advanced technologically, more and more neurosurgical implants are being employed on an aging patient population with several comorbidities. As a result, there is a steady increase in the frequency of infections linked to neurosurgical implants, which causes serious morbidity and mortality as well as abnormalities of the skull and inadequate brain protection. We discuss infections linked to internal and external ventricular and lumbar cerebrospinal fluid drainages, neurostimulators, craniotomies, and cranioplasty in this article. Biofilms, which are challenging to remove, are involved in all implant-associated illnesses. It takes a small quantity of microorganisms to create a biofilm on the implant surface. Skin flora bacteria are implicated in the majority of illnesses. Microorganisms that cause disruptions in wound healing make their way to the implant either during or right after surgery. In about two thirds of patients, implant-associated infections manifest early (within the first month after surgery), whereas the remaining infections present later as a result of low-grade infections or by direct extension from adjacent infections (per continuitatem) to the implants due to soft tissue damage. Except for ventriculo-atrial cerebrospinal fluid shunts, neurosurgical implants are rarely infected by the haematogenous route. This research examines established and clinically validated principles that are applicable to a range of surgical specialties using implants to treat biofilm-associated infections in orthopaedic and trauma cases. Nevertheless, there is little evidence and no evaluation in sizable patient populations to support the success of this extrapolation to neurosurgical patients. An optimal microbiological diagnostic, which includes sonicating removed implants and extending culture incubation times, is necessary for a positive result. Additionally, a strategy combining surgical and antibiotic therapy is needed. Surgical procedures involve a suitable debridement along with implant replacement or exchange, contingent on the biofilm's age and the state of the soft tissue. A protracted biofilm-active therapy is a component of antimicrobial treatment, usually lasting 4-12 weeks. This idea is appealing because it allows implants to be changed or kept in place for a single surgical procedure in a subset of patients. This not only enhances quality of life but also lowers morbidity because each additional neurosurgical procedure increases the risk of secondary complications like intracerebral bleeding or ischemia.

[Comparison of polymethyl methacrylate skull implant fixation by three types of titanium fasteners]. / Sravnenie sposobov fiksatsii implantov cherepa iz polimetilmetakrilata tremya vidami titanovykh krepezhei.

OBJECTIVE: To evaluate mechanical strength of three methods of polymethyl methacrylate skull implant fixation in two experimental models. MATERIAL AND METHODS: The first experiment was performed on a plastic model that was as close as possible to bone in structural characteristics. The second experiment was performed on a biological specimen (a ram's head). We assessed the quality of implant fixation to bone window edges by craniofixes, ties and microscrews and lateral intercortical screws. RESULTS: Craniofixes are feasible for small flat flaps, but not advisable for wide highly curved implants. They are also the most expensive method of fixation. Implant fixation by ties and microscrews is a universal method comparable in price to craniofix. Lateral intercortical fixation is effective both for small flat implants and wide implants with large curvature. However, this method is not always applicable. CONCLUSION: Combined fixation by lateral intercortical screws and ties allows for the most effective fixation while reducing the overall price of consumables.

Primary, Dural-based, Ewing sarcoma in a pediatric patient: presentation of a rare tumor entity with literature review.

Primary Ewing's sarcoma originating from the calvaria bone and/or underlying Dural involvement has been reported relatively rarely in the literature. Those originating from the dura and invading the bone above it in both directions, both towards the brain parenchyma and via the dura, are even rarer. CASE DESCRIPTION: We present a case of a 14-year-old girl with no known focal neurological deficit who presented with the complaint of vertigo for only 2 months. In neuroradiological examination, the left frontoparietal region of the brain showed the presence of a tumor originating from the dura, invading both bone and brain parenchyma. No other tumor location was discovered after radiological examination. Since the patient had a shift in the brain and progressive loss of strength on the right side, the patient was taken to surgery for tumor excision. The frozen result sent per-operatively was consistent with a round blue cell tumor. Adjuvant chemotherapy treatment was given to the patient after the definitive pathology report was compatible with Ewing's sarcoma. CONCLUSION: The patient had an uneventful neurological recovery without permanent neurological deficit. When the patient was kept under close clinical and radiological surveillance 1 year after the operation, no recurrence of the disease was observed. Bone marrow biopsy results and pet computerized tomography results confirmed the case of primary intracerebral Ewing sarcoma. This case illustrates an extremely rare location of primary Ewing's sarcoma with a set of clinical signs and symptoms extremely rare for this location of this rare disease entity.

Utilization of carbonated calcium phosphate cement for contouring cranioplasty in patients with syndromic craniosynostosis.

PURPOSE: Carbonated calcium phosphate (CCP) cement is an alloplastic material which has been increasingly utilized for cranioplasty reconstruction; however, there is a paucity of data investigating its use in patients with syndromic craniosynostosis. The purpose of this study was to characterize our institutional experience with CCP cement for secondary contouring cranioplasty in these patients to establish safety and aesthetic efficacy. METHODS: Patients with syndromic craniosynostosis undergoing cranioplasty with CCP cement from 2009 to 2022 were retrospectively reviewed for prior medical and surgical history, cranioplasty size, cement usage, and postoperative complications. Aesthetic ratings of the forehead region were quantified using the Whitaker scoring system at three timepoints: preoperative (T1), < 6 months postoperative (T2), and > 1 year postoperative (T3). RESULTS: Twenty-one patients were included. Age at surgery was 16.2 ± 2.8 years, forehead cranioplasty area was 135 ± 112 cm2, and mass of cement was 17.2 ± 7.8 g. Patients were followed for 3.0 ± 3.1 years. Whitaker scores decreased from 1.9 ± 0.4 at T1 to 1.4 ± 0.5 at T2 (p = 0.005). Whitaker scores at T2 and T3 were not significantly different (p = 0.720). Two infectious complications (9.5%) were noted, one at 4.5 months postoperatively and the other at 23 months, both requiring operative removal of CCP cement. CONCLUSION: Our results suggest that aesthetic forehead ratings improve after CCP contouring cranioplasty and that the improvement is sustained in medium-term follow-up. Complications were uncommon, suggesting that CCP is relatively safe though longer-term follow-up is needed before reaching definitive conclusions.

Cranial vault reduction cranioplasty for severe macrocephaly due to holoprosencephaly and subdural hygroma: a case report.

BACKGROUND: Severe macrocephaly can still be found in developing countries. This condition is usually caused by neglected hydrocephalus and can cause a lot of morbidities. Cranial vault reconstruction cranioplasty is the main treatment option for severe macrocephaly. Holoprosencephaly is often seen with features of microcephaly. Hydrocephalus should be considered as the main cause in HPE patients with features of macrocephaly. In this report, we present a rare case of cranial vault reduction cranioplasty procedure in patient with severe macrocephaly due to holoprosencephaly and subdural hygroma. CASE DESCRIPTION: A 4-year-10-month-old Indonesian boy was admitted with head enlargement since birth. He had a history of VP shunt placement when he was 3 months old. But the condition was neglected. Preoperative head CT showed massive bilateral subdural hygroma that compressed brain parenchyma caudally. From the craniometric calculation, the occipital frontal circumference was 70.5 cm with prominent vertex expansion, the distance between nasion to inion was 11.91 cm and the vertical height was 25.59 cm. The preoperative cranial volume was 24.611 cc. The patient underwent subdural hygroma evacuation and cranial vault reduction cranioplasty. The postoperative cranial volume was 10.468 cc. CONCLUSION: Subdural hygroma can be a rare cause of severe macrocephaly in holoprosencephaly patients. Cranial vault reduction cranioplasty and subdural hygroma evacuation is still the main treatment option. Our procedure successfully reduces significant cranial volume (57.46% volume reduction).