RESUMO
The unsatisfactory power conversion efficiency (PCE) and long-term stability of tin perovskite solar cells (TPSCs) restrict its further development as alternatives to lead perovskite solar cells (LPSCs). Considerable research has focused on the negative impacts of O2 and H2 O, while discussions about degradation mechanism in an inert atmosphere remains insufficient. Herein, the light-induced autoxidation of tin perovskite in nitrogen atmosphere is revealed for the first time and the elastic lattice distortion is demonstrated as the crucial role of rapid degradation. The continuous injection of photons induces energy transfer from excited A-site cations to vibrating Sn-I framework, leading to the elastic deformation of perovskite lattice. Consequently, the over distorted Sn-I framework releases free iodine and further oxidizes Sn2+ in the form of molecular iodine. Through an appropriately designed light-dark cyclic test, a remarkable PCE of 14.41% is achieved based on (Cs0.025 (MA0.25 FA0.75 )0.975 ) 0.98 EDA0.01 SnI3 solar cells, which is the record of hybrid triple TPSCs so far. The findings unveil autoxidation as the crux of TPSCs' degradation in an inert atmosphere and suggest the possibility of reinforcing the tin perovskite lattice towards highly efficient and stable TPSCs.
RESUMO
Blue quantum dot light-emitting devices (QLEDs) suffer from fast electroluminescence (EL) loss when under electrical bias. Here, it is identified that the fast EL loss in blue QLEDs is not due to a deterioration in the photoluminescence quantum yield of the quantum dots (QDs), contrary to what is commonly believed, but rather arises primarily from changes in charge injection overtime under the bias that leads to a deterioration in charge balance. Measurements on hole-only and electron-only devices show that hole injection into blue QDs increases over time whereas electron injection decreases. Results also show that the changes are associated with changes in hole and electron trap densities. The results are further verified using QLEDs with blue and red QDs combinations, capacitance versus voltage, and versus time characteristics of the blue QLEDs. The changes in charge injection are also observed to be partially reversible, and therefore using pulsed current instead of constant current bias for driving the blue QLEDs leads to an almost 2.5× longer lifetime at the same initial luminance. This work systematically investigates the origin of blue QLEDs EL loss and provides insights for designing improved blue QDs paving the way for QLEDs technology commercialization.
RESUMO
In this work, the oxidation of gatifloxacin (GAT), fleroxacin (FLE) and enoxacin (ENO) in aqueous solution by ferrate (Fe(VI)) was systemically investigated. Weak alkaline and high oxidant doses were favorable for the reaction. The pseudosecond-order rate constants were 0.18055, 0.29162, and 0.05476 L/(mg·min), and the activation energies were 25.13, 15.25, and 11.30 kJ/mol at pH = 8.00 and n(Fe(VI)):n(GAT) = 30:1, n(Fe(VI)):n(FLE) = 20:1, n(Fe(VI)):n(ENO) = 40:1 and a temperature of 25 °C. The maximum degradation rates of the GAT, FLE and ENO were 96.72%, 98.48% and 94.12%, respectively, well simulated by Response Surface Methodology. During the oxidation, the contribution of hydroxyl radicals (HOâ¢) varied with time, whereas the final contribution was approximately 20% at 30 min. The removal efficiency was inhibited by anions by less than 10%, and cations by less than 25%, and significantly inhibited by high concentrations of humic acid. Moreover, two or three dominant reaction pathways were predicted, and the ring cleavages of quinolone and piperazine were mainly achieved through decarboxylation, demethlation and hydroxylation, and some pathways ended up with monocyclic chemicals, which were harmless to aquatic animals and plants. Theoretical calculations further proved that the reactions between FeO4- and neutral fluoroquinolone antibiotics were the major reactions. This work illustrates that Fe(VI) can efficiently remove fluoroquinolone antibiotics (FQs) in aqueous environments, and the results may contribute to the treatment of wastewater containing trace antibiotics and Fe(VI) chemistry.
Assuntos
Poluentes Químicos da Água , Purificação da Água , Animais , Fluoroquinolonas , Água , Ferro , Oxirredução , Antibacterianos , Poluentes Químicos da Água/análise , Cinética , Purificação da Água/métodosRESUMO
This study synthesized novel, green, and easily recoverable surface-modified economical catalysts via hydrothermal treatment (HT) successfully, utilizing biogas residue biochar (BRB), a food waste product from anaerobic fermentation, pyrolyzed at 500 °C for 50 min. Using autoclaves, a total of six solutions were prepared, each having 1 g fine-grinded BRB, surficial modified by adding glycerol (GL) (10 or 20 mL) and SDI water (70 or 60 mL), and heated in an oven at 240 °C, 180 °C, and 120 °C for 24 h. Afterward, the catalysts showed the potential for degradation of widely used emerging pollutants like ciprofloxacin. Taking advantage of catalytic surface modification, the catalytic ozonation degradation was more effective than that of a single ozonation. However, under similar conditions, catalyst amount 0.20 g, ozone dose 15 mg L-1, and ciprofloxacin 80 mg L-1, the performance of the 10 mL GL-180 °C catalyst was excellent. It showed a 92.45%-94.41% optimum removal rate in the 8-10 min interval. After five continuous cycles, the 10 mL GL-180 °C catalyst exhibited excellent stability and reusability. XPS, FT-IR, BET, XRD, and SEM before and after the reaction confirmed the successful synthesis and degradation mechanism. A possible degradation pathway was unrevealed based on a liquid chromatography-mass spectrometer (LC-MS) and scavenger test, proving the significant roles of superoxide radicals (O2â¢-), hydroxyl radicals (â¢OH), and singlet oxygen (1O2). Further, Electron paramagnetic resonance (EPR) analysis confirmed the presence of active oxygen species. Subsequently, 10 mL GL-180 °C showed promising degradation for the actual water environment, such as groundwater (73.55%) and river water (64.74%). This work provides a valuable economic strategy to convert biogas residue biochar into a low-cost catalyst for organic pollutant decomposition.
Assuntos
Biocombustíveis , Carvão Vegetal , Ciprofloxacina , Ozônio , Poluentes Químicos da Água , Ozônio/química , Carvão Vegetal/química , Ciprofloxacina/química , Catálise , Poluentes Químicos da Água/química , Biocombustíveis/análiseRESUMO
In this study, we report the development of a novel CuOx(3 wt%)/CoFe2O4 nanocubes (NCs) photocatalyst through simple co-precipitation and wet impregnation methods for the efficient photocatalytic degradation of triclosan (TCS) pollutants. Initially, rod-shaped bare CoFe2O4 was synthesized using a simple co-precipitation technique. Subsequently, CuOx was loaded in various percentages (1, 2, and 3 wt%) onto the surface of bare CoFe2O4 nanorods (NRs) via the wet impregnation method. The synthesized materials were systematically characterized to evaluate their composition, structural and electrical characteristics. The CuOx(3 wt%)/CoFe2O4 NCs photocatalyst exhibited superior photocatalytic degradation efficiency of TCS (89.9%) compared to bare CoFe2O4 NRs (62.1 %), CuOx(1 wt%)/CoFe2O4 (80.1 %), CuOx(2 wt%)/CoFe2O4 (87.0 %) under visible light (VL) irradiation (λ ≥ 420 nm), respectively. This enhanced performance was attributed to the improved separation effectiveness of photogenerated electron (e-) and hole (h+) in CuOx(3 wt%)/CoFe2O4 NCs. Furthermore, the optimized CuOx(3 wt%)/CoFe2O4 NCs exhibited strong stability and reusability in TCS degradation, as demonstrated by three successive cycles. Genetic screening on Caenorhabditis elegans showed that CuOx(3 wt%)/CoFe2O4 NCs reduced ROS-induced oxidative stress during TCS photocatalytic degradation. ROS levels decreased at 30, 60, and 120-min intervals during TCS degradation, accompanied by improved egg hatching rates. Additionally, expression levels of stress-responsible antioxidant proteins like SOD-3GFP and HSP-16.2GFP were significantly normalized. This study demonstrates the efficiency of CuOx(3 wt%)/CoFe2O4 NCs in degrading TCS pollutants, offers insights into toxicity dynamics, and recommends its use for future environmental remediation.
RESUMO
Duvelisib (DUV) was first approved globally in 2018. An extensive literature search revealed that the differential role of a potential degradation medium in altering the shelf-life of DUV due to its exposure during storage has not been identified till date. Moreover, its degradation impurities and degradation mechanism are not known. In addition, no analytical method has been reported for the quantification of DUV in the presence of its degradation impurities. Therefore, the aim of this study was to identify the impact of different potential degradation media on the stability of DUV, establish the degradation mechanism, and identify its major degradation impurities. The aim was also to establish a stability-indicating analytical method for the quantification of DUV in the presence of its degradation impurities. This study is the first to report the structure of degradation impurities and the step-by-step degradation mechanism of DUV. This information will be useful for the scientific community and manufacturers in optimizing the formulation parameters and/or storage conditions. The validated method can be employed for analysis of stability study and routine quality control samples of newer DUV formulations in pharmaceutical industries. The identified impurities may serve as impurity standards for specifying their limits in the drug after required qualification studies.
Assuntos
Espectrometria de Massa com Cromatografia Líquida , Espectrometria de Massas em Tandem , Cromatografia Líquida , Cromatografia Líquida de Alta Pressão/métodos , Contaminação de Medicamentos , Estabilidade de MedicamentosRESUMO
Selumetinib (SELU) was recently approved by the US Food and Drug Administration (US FDA) in 2020. However, the degradation impurities of SELU have not been characterized or identified to date. The mechanism for impurity formation and the degradation behavior have not been previously studied. This study aims to elucidate the prototypical degradation mechanism of SELU. Furthermore, the degradation impurities have been identified using LC-quadrupole-time-of-flight tandem mass spectrometry and are reported in this article for the first time. In addition, a stability-indicating analytical method (SIAM) has been developed for this drug. Forced degradation studies revealed the degradation of SELU under various stress conditions, including hydrolytic stress (acid and base), oxidative stress, and photolytic stress (ultraviolet and visible). Three degradation impurities were identified. This article presents the first validated SIAM, capable of accurately quantifying SELU in the presence of its degradation impurities. Furthermore, we have proposed the degradation pathway for SELU and its degradation impurities, a first in the field. The developed SIAM can find applications in process development and quality assurance of SELU in both research laboratories and pharmaceutical industries. Moreover, the identified degradation impurities may serve as impurity standards for quality control testing in pharmaceutical industries.
Assuntos
Contaminação de Medicamentos , Espectrometria de Massas em Tandem , Espectrometria de Massas em Tandem/métodos , Cromatografia Líquida de Alta Pressão/métodos , Estabilidade de Medicamentos , Cromatografia Líquida/métodosRESUMO
Food contaminated by mycotoxins has become a worldwide public problem with political and economic implications. Although a variety of traditional methods have been used to eliminate mycotoxins from agri-foods, the results have been somewhat less than satisfactory. As an emerging non-thermal processing technology, atmospheric cold plasma (ACP) has great potential for food decontamination. Herein, this review mainly presents the degradation efficiency of ACP on mycotoxins in vitro and agri-foods as well as its possible degradation mechanisms. Meanwhile, ACP effects on food quality, factors affecting the degradation efficiency and the toxicity of degradation products are also discussed. According to the literatures, ACP could efficiently degrade many mycotoxins (e.g., aflatoxin, deoxynivalenol, zearalenone, ochratoxin A, fumonisin, and T-2 toxin) both in vitro and various foods (e.g., hazelnut, peanut, maize, rice, wheat, barley, oat flour, and date palm fruit) with little effects on the nutritional and sensory properties of food. The degradation efficacy was dependent on many factors including ACP treatment parameter, working gas, mycotoxin property, and food substrate. The mycotoxin degradation by ACP was mainly attributed to the reactive oxygen and nitrogen species in ACP, which can damage the chemical bonds of mycotoxins, consequently reducing the toxicity of mycotoxins.
Assuntos
Fumonisinas , Micotoxinas , Gases em Plasma , Zearalenona , Micotoxinas/toxicidade , Gases em Plasma/química , Contaminação de Alimentos/análise , Fumonisinas/análiseRESUMO
Beta-cypermethrin (ß-CY) residues in food are an important threat to human health. Microorganisms can degrade ß-CY residues during fermentation of fruits and vegetables, while the mechanism is not clear. In this study, a comprehensively investigate of the degradation mechanism of ß-CY in a food microorganism was conducted based on proteomics analysis. The ß-CY degradation bacteria Gordonia alkanivorans GH-1 was derived from fermented Pixian Doubanjiang. Its crude enzyme extract could degrade 77.11% of ß-CY at a concentration of 45 mg/L within 24 h. Proteomics analysis revealed that the ester bond of ß-CY is broken under the action of esterase to produce 3-phenoxy benzoic acid, which was further degraded by oxidoreductase and aromatic degrading enzyme. The up-regulation expression of oxidoreductase and esterase was confirmed by transcriptome and quantitative reverse transcription PCR. Meanwhile, the expression of esterase Est280 in Escherichia coli BL21 (DE3) resulted in a 48.43% enhancement in the degradation efficiency of ß-CY, which confirmed that this enzyme was the key enzyme in the process of ß-CY degradation. This study reveals the degradation mechanism of ß-CY by microorganisms during food fermentation, providing a theoretical basis for the application of food microorganisms in ß-CY residues.
Assuntos
Esterases , Proteômica , Piretrinas , Piretrinas/metabolismo , Esterases/metabolismo , Esterases/genética , Alimentos Fermentados/microbiologia , Fermentação , Escherichia coli/metabolismo , Escherichia coli/genética , Proteínas de Bactérias/metabolismo , Proteínas de Bactérias/genéticaRESUMO
A novel photocatalytic nanomaterial, Ho2YSbO7, was successfully synthesized for the first time using the solvothermal synthesis technique. In addition, a Ho2YSbO7/Bi2MoO6 heterojunction photocatalyst (HBHP) was prepared via the hydrothermal fabrication technique. Extensive characterizations of the synthesized samples were conducted using various instruments, such as an X-ray diffractometer, a Fourier transform infrared spectrometer, a Raman spectrometer, a UV-visible spectrophotometer, an X-ray photoelectron spectrometer, and a transmission electron microscope, as well as X-ray energy dispersive spectroscopy, photoluminescence spectroscopy, a photocurrent test, electrochemical impedance spectroscopy, ultraviolet photoelectron spectroscopy, and electron paramagnetic resonance. The photocatalytic activity of the HBHP was evaluated for the degradation of diuron (DRN) and the mineralization of total organic carbon (TOC) under visible light exposure for 152 min. Remarkable removal efficiencies were achieved, with 99.78% for DRN and 97.19% for TOC. Comparative analysis demonstrated that the HBHP exhibited markedly higher removal efficiencies for DRN compared to Ho2YSbO7, Bi2MoO6, or N-doped TiO2 photocatalyst, with removal efficiencies 1.13 times, 1.21 times, or 2.95 times higher, respectively. Similarly, the HBHP demonstrated significantly higher removal efficiencies for TOC compared to Ho2YSbO7, Bi2MoO6, or N-doped TiO2 photocatalyst, with removal efficiencies 1.17 times, 1.25 times, or 3.39 times higher, respectively. Furthermore, the HBHP demonstrated excellent stability and reusability. The mechanisms which could enhance the photocatalytic activity remarkably and the involvement of the major active species were comprehensively discussed, with superoxide radicals identified as the primary active species, followed by hydroxyl radicals and holes. The results of this study contribute to the advancement of efficient heterostructural materials and offer valuable insights into the development of sustainable remediation strategies for addressing DRN contamination.
Assuntos
Bismuto , Diurona , Luz , Molibdênio , Fotólise , Bismuto/química , Catálise , Molibdênio/química , Diurona/química , Poluentes Químicos da Água/químicaRESUMO
The effect of the structure of promising antioxidant agents with prospective medical use, i.e., unsubstituted and para-substituted annelated triazinylacetic acid hydrazides, on their melting points, thermal stabilities, pyrolysis and oxidative decomposition stages and the type of volatiles emitted under heating with the use of DSC and TG/DTG/FTIR/QMS methods was evaluated and discussed. The melting point of the investigated compounds increased with an enhanced number of electrons (directly correlated with their molecular weight). Melting enthalpy values were determined and presented for all the studied compounds. The pyrolysis and oxidative decomposition processes of the analysed molecules consisted of several poorly separated stages, which indicated a multi-step course of the decomposition reactions. It was found that the thermal stability of the tested compounds depended on the type of substituent at the para position of the phenyl moiety or its absence. In both atmospheres used (air and helium), the thermal stability increased in relation to R as follows: -CH3 ≤ -OCH3 < -H < -OC2H5. In an inert atmosphere, it was higher by approx. 8-18 °C than in an oxidative atmosphere. The pyrolysis was connected with the emission of NH3, HCN, HNCO, HCONH2, HCHO, CO2, CO and H2O in the case of all the tested compounds, regardless of the substituent attached. In the case of the derivative containing the para-CH3 group, para-toluidine was an additional emitted aromatic product. In turn, emissions of aniline and alcohol (methanol or ethanol) for compounds with the para-OCH3 and para-OC2H5 groups, respectively, were confirmed. In oxidative conditions, the release of NH3, NO, HCN, HNCO, HCONH2, CO2, H2O and cyanogen (for all the compounds) and para-toluidine (for the para-CH3 derivative), aniline (for para-OCH3, para-OC2H5 and unsubstituted derivatives) and acetaldehyde (for the para-OC2H5 derivative) were clearly observed. No alcohol emissions were recorded for either compound containing the para-OCH3- or para-OC2H5-substitututed phenyl ring. These results confirmed that the pyrolysis and oxidative decomposition of the investigated annelated triazinylacetohydrazides occurred according to the radical mechanism. Moreover, in the presence of oxygen, the reactions of volatiles and residues with oxygen (oxidation) and the combustion process additionally proceeded.
Assuntos
Dióxido de Carbono , Pirólise , Toluidinas , Estudos Prospectivos , Etanol , Compostos de Anilina , Oxigênio , Estresse OxidativoRESUMO
This study presents a pioneering synthesis of a direct Z-scheme Y2TmSbO7/GdYBiNbO7 heterojunction photocatalyst (YGHP) using an ultrasound-assisted hydrothermal synthesis technique. Additionally, novel photocatalytic nanomaterials, namely Y2TmSbO7 and GdYBiNbO7, were fabricated via the hydrothermal fabrication technique. A comprehensive range of characterization techniques, including X-ray diffractometry, Fourier-transform infrared spectroscopy, Raman spectroscopy, UV-visible spectrophotometry, X-ray photoelectron spectroscopy, transmission electron microscopy, X-ray energy-dispersive spectroscopy, fluorescence spectroscopy, photocurrent testing, electrochemical impedance spectroscopy, ultraviolet photoelectron spectroscopy, and electron paramagnetic resonance, was employed to thoroughly investigate the morphological features, composition, chemical, optical, and photoelectric properties of the fabricated samples. The photocatalytic performance of YGHP was assessed in the degradation of the pesticide acetochlor (AC) and the mineralization of total organic carbon (TOC) under visible light exposure, demonstrating eximious removal efficiencies. Specifically, AC and TOC exhibited removal rates of 99.75% and 97.90%, respectively. Comparative analysis revealed that YGHP showcased significantly higher removal efficiencies for AC compared to the Y2TmSbO7, GdYBiNbO7, or N-doped TiO2 photocatalyst, with removal rates being 1.12 times, 1.21 times, or 3.07 times higher, respectively. Similarly, YGHP demonstrated substantially higher removal efficiencies for TOC than the aforementioned photocatalysts, with removal rates 1.15 times, 1.28 times, or 3.51 times higher, respectively. These improvements could be attributed to the Z-scheme charge transfer configuration, which preserved the preferable redox capacities of Y2TmSbO7 and GdYBiNbO7. Furthermore, the stability and durability of YGHP were confirmed, affirming its potential for practical applications. Trapping experiments and electron spin resonance analyses identified active species generated by YGHP, namely â¢OH, â¢O2-, and h+, allowing for comprehensive analysis of the degradation mechanisms and pathways of AC. Overall, this investigation advances the development of efficient Z-scheme heterostructural materials and provides valuable insights into formulating sustainable remediation strategies for combatting AC contamination.
Assuntos
Luz , Toluidinas , Catálise , Toluidinas/química , Fotólise , Poluentes Químicos da Água/química , Processos Fotoquímicos , Espectroscopia Fotoeletrônica , Gadolínio/químicaRESUMO
If pharmaceutical wastewater is not managed effectively, the presence of residual antibiotics will result in significant environmental contamination. In addition, inadequate utilization of agricultural waste represents a squandering of resources. The objective of this research was to assess the efficacy of iron-doped biochar (Fe-BC) derived from peanut shells in degrading high concentrations of Tetracycline (TC) wastewater through activated peroxymonosulfate. Fe-BC demonstrated significant efficacy, achieving a removal efficiency of 87.5% for TC within 60 min without the need to adjust the initial pH (20 mg/L TC, 2 mM PMS, 0.5 g/L catalyst). The degradation mechanism of TC in this system involved a dual action, namely Reactive Oxygen Species (ROS) and electron transfer. The primary active sites were the Fe species, which facilitated the generation of SO4â¢-, â¢OH, O2â¢-, and 1O2. The presence of Fe species and the C=C structure in the Fe-BC catalyst support the electron transfer. Degradation pathways were elucidated through the identification of intermediate products and calculation of the Fukui index. The Toxicity Estimator Software Tool (T.E.S.T.) suggested that the intermediates exhibited lower levels of toxicity. Furthermore, the system exhibited exceptional capabilities in real water and circulation experiments, offering significant economic advantages. This investigation provides an efficient strategy for resource recycling and the treatment of high-concentration antibiotic wastewater.
Assuntos
Carvão Vegetal , Ferro , Espécies Reativas de Oxigênio , Tetraciclina , Águas Residuárias , Tetraciclina/química , Carvão Vegetal/química , Espécies Reativas de Oxigênio/química , Águas Residuárias/química , Ferro/química , Poluentes Químicos da Água/química , Peróxidos/química , Transporte de ElétronsRESUMO
The increasing contamination of water systems by antibiotics and heavy metals has become a growing concern. The intimately coupled photocatalysis and biodegradation (ICPB) approach offers a promising strategy for the effective removal of mixed pollutants. Despite some prior research on ICPB applications, the mechanism by which ICPB eliminates mixed pollutants remains unclear. In our current study, the ICPB approach achieved approximately 1.53 times the degradation rate of ciprofloxacin (CIP) and roughly 1.82 times the reduction rate of Cr (VI) compared to photocatalysis. Remarkably, after 30 days, the ICPB achieved a 96.1% CIP removal rate, and a 97.8% reduction in Cr (VI). Our investigation utilized three-dimensional fluorescence analysis and photo-electrochemical characterization to unveil the synergistic effects of photocatalysis and biodegradation in removal of CIP and Cr (VI). Incorporation of B-Bi3O4Cl (B-BOC) photocatalyst facilitated electron-hole separation, leading to production of ·O2-, ·OH, and h+ species which interacted with CIP, while electrons reduced Cr (VI). Subsequently, the photocatalytic products were biodegraded by a protective biofilm. Furthermore, we observed that CIP, acting as an electron donor, promoted the reduction of Cr (VI). The microbial communities revealed that the number of bacteria favoring pollutant removal increased during ICPB operation, leading to a significant enhancement in performance.
Assuntos
Ciprofloxacina , Poluentes Ambientais , Antibacterianos , Biodegradação Ambiental , Cromo/química , CatáliseRESUMO
The abuse and uncontrolled discharge of antibiotics present a severe threat to environment and human health, necessitating the development of efficient and sustainable treatment technology. In this work, we employ a facile one-step electrodeposition method to prepare polyaniline/graphite oxide (PANI/GO) and samarium (Sm) co-modified Ti/PbO2 (Ti/PbO2-PANI/GO-Sm) electrode for the degradation of amoxicillin (AMX). Compared with traditional Ti/PbO2 electrode, Ti/PbO2-PANI/GO-Sm electrode exhibits more excellent oxygen evolution potential (2.63 V) and longer service life (56 h). In degradation experiment, under optimized conditions (50 mg L-1 AMX, 20 mA cm-2, pH 3, 0.050 M Na2SO4, 25 °C), Ti/PbO2-PANI/GO-Sm electrode achieves remarkable removal efficiencies of 88.76% for AMX and 79.92% for chemical oxygen demand at 90 min. In addition, trapping experiment confirms that ·OH plays a major role in the degradation process. Based on theoretical calculation and liquid chromatography-mass spectrometer results, the heterocyclic portion of AMX molecule is more susceptible to ·OH attacks. Thus, this novel electrode offers a sustainable and efficient solution to address environmental challenges posed by antibiotic-contaminated wastewater.
Assuntos
Amoxicilina , Eletrodos , Amoxicilina/química , Titânio/química , Poluentes Químicos da Água/química , Samário/químicaRESUMO
Chlorinated organic compounds (COCs) are typical refractory organic compounds, having high biological toxicity. These compounds are a type of pervasive pollutants that can be present in polluted soil, air, and various types of waterways, such as groundwater, rivers, and lakes, posing a significant threat to the ecological environment and human health. Bioelectrochemical systems (BESs) are an effective strategy for the degradation of bio-refractory compounds. BESs improve the waste treatment efficiency through the application of weak electrical stimulation. This review discusses the processes of BESs configurations and degradation performances in different environmental media including wastewater, soil, waste gas and groundwater. In addition, the degradation mechanisms and performance-enhancing additives are summarized. The future challenges and perspectives on the development of BES for COCs removal are briefly discussed.
Assuntos
Biodegradação Ambiental , Técnicas Eletroquímicas , Águas Residuárias/química , Hidrocarbonetos Clorados/metabolismo , Poluentes Químicos da Água/metabolismo , Água Subterrânea/química , Compostos Orgânicos/metabolismoRESUMO
The comparatively poor endurance of Ni-rich cathode materials restricts their application in high-energy lithium-ion batteries. A thorough understanding of the degradation characteristics of such materials under complex electrochemical aging protocols is required to further improve their reliability. In this work, the irreversible capacity losses of LiNi0.8 Mn0.1 Co0.1 O2 under different electrochemical aging protocols are quantitatively evaluated via a well-designed experiment. In addition, it is discovered that the origin of irreversible capacity losses is highly related to electrochemical cycling parameters and can be divided into two types. Type I is heterogeneous degradation caused by low C-rate or high upper cut-off voltage cycling and features abundant capacity loss during H2-H3 phase transition. Such capacity loss is attributed to the irreversible surface phase transition that limits the accessible state of charge during the H2-H3 phase transition stage via the pinning effect. Type II is fast charging/discharging induced homogeneous capacity loss that occurs consistently throughout the whole phase transition time. This degradation pathway shows a distinctive surface crystal structure, which is dominated by a bending layered structure rather than a typical rock-salt phase structure. This work offers detailed insight into the failure mechanism of Ni-rich cathodes and provides guidance on designing long-cycle life, high-reliability electrode materials.
RESUMO
Organic-inorganic hybrid materials often face a stability challenge. ß-ZnTe(en)0.5 , which uniquely has over 15-year real-time degradation data, is taken as a prototype structure to demonstrate an accelerated thermal aging method for assessing the intrinsic and ambient-condition long-term stability of hybrid materials. Micro-Raman spectroscopy is used to investigate the thermal degradation of ß-ZnTe(en)0.5 in a protected condition and in air by monitoring the temperature dependences of the intrinsic and degradation-product Raman modes. First, to understand the intrinsic degradation mechanism, the transition state of the degradation is identified, then using a density functional theory, the intrinsic energy barrier between the transition state and ground state is calculated to be 1.70 eV, in excellent agreement with the measured thermal degradation barrier of 1.62 eV in N2 environment. Second, for the ambient-condition degradation, a reduced thermal activation barrier of 0.92 eV is obtained due to oxidation, corresponding to a projected ambient half-life of 40 years at room temperature, in general agreement with the experimental observation of no apparent degradation over 15 years. Furthermore, the study reveals a mechanism, conformation distortion enhanced stability, which plays a pivotal role in forming the high kinetic barrier, contributing greatly to the impressive long-term stability of ß-ZnTe(en)0.5 .
RESUMO
The degradation of ATP-related compounds is an important biochemical process that reflects the freshness of aquatic products after death. There has been considerable interest in investigating the factors affecting the degradation of ATP-related compounds in aquatic products and in developing techniques to detect them. This review provides the latest knowledge on the degradation mechanisms of ATP-related compounds during the storage of aquatic products and discusses the latest advances in ATP-related compound detection techniques. The degradation mechanisms discussed include mainly degradation pathways, endogenous enzymes, and microbial mechanisms of action. Microbial activity is the main reason for the degradation of IMP and related products during the mid to late storage of aquatic products, mainly through the related enzymes produced by microorganisms. Further elucidation of the degradation mechanisms of ATP-related compounds provides new ideas for quality control techniques in raw aquatic products during storage. The development of new technologies for the detection of ATP-related compounds has become a significant area of research. And, biosensors further improve the efficiency and accuracy of detection and have potential application prospects. The development of biosensor back-end modalities (test strips, fluorescent probes, and artificial intelligence) has accelerated the practical application of biosensors for the detection of ATP-related compounds.
RESUMO
Human gut microbiota played a key role in maintaining and regulating host health. Gut microbiota composition could be altered by daily diet and related nutrients. Diet polysaccharide, an important dietary nutrient, was one kind of biological macromolecules linked by the glycosidic bonds. Galactans were widely used in foods due to their gelling, thickening and stabilizing properties. Recently, effects of different galactans on gut microbiota have attracted much attention. This review described the structural characteristics of 4 kinds of galactans, including porphyran, agarose, carrageenan, and arabinogalactan, along with the effects of different galactans on gut microbiota and production of short-chain fatty acids. The ability of gut microbiota to utilize galactans with different structural characteristics and related degradation mechanism were also summarized. All these four galactans could be used by gut Bacteroides. Besides, the porphyran could be utilized by Lactobacillus and Bifidobacterium, while the arabinogalactan could be utilized by Lactobacillus, Bifidobacterium and Roseburia. Four galactans with significant difference in molecular weight/degree of polymerization, glycosidic linkage, esterification, branching and monosaccharide composition required gut microbes which could utilize them have corresponding genes encoding the corresponding enzymes for decomposition. This review could help to understand the relationship between galactans with different structural characteristics and gut microbiota, and provide information for potential use of galactans as functional foods.