Dynamic Stimulation of Visual Cortex Produces Form Vision in Sighted and Blind Humans.

A visual cortical prosthesis (VCP) has long been proposed as a strategy for restoring useful vision to the blind, under the assumption that visual percepts of small spots of light produced with electrical stimulation of visual cortex (phosphenes) will combine into coherent percepts of visual forms, like pixels on a video screen. We tested an alternative strategy in which shapes were traced on the surface of visual cortex by stimulating electrodes in dynamic sequence. In both sighted and blind participants, dynamic stimulation enabled accurate recognition of letter shapes predicted by the brain's spatial map of the visual world. Forms were presented and recognized rapidly by blind participants, up to 86 forms per minute. These findings demonstrate that a brain prosthetic can produce coherent percepts of visual forms.

Realized Record Capacity and Rate Performance of Dual-Carbon Batteries Constructed by Introducing Superhard Nanodiamonds.

Dual-ion batteries (DIBs) are becoming an important technology for energy storage. To overcome the disadvantages of traditional electrodes and electrolytes, here we assemble a dual-carbon DIB with nanodiamond (ND)-modified crimped graphene (DCG) and electrolyte. The DCG anode and cathode realize high capacities of 1121 mA h g-1 and 149 mA h g-1, respectively, at 0.1 A g-1. The corresponding DCG//DCG full cells present a high capacity of 143 mA h g-1 at 1 A g-1 after 3300 cycles, which is superior to most reported results. Achieving these record performances is strongly dependent on the formed DCG electrodes with expanded interlayer spacing and abundant active sites, and NDs dispersed in DCG and electrolytes are very helpful for enhancing the storage of both cations and anions, effectively suppressing the irreversible decomposition of electrolytes. This work breaks through the bottleneck of graphitic-based DIBs, paving the way for realizing high-performance DIBs applied in industry.

All van der Waals Semiconducting PtSe2 Field Effect Transistors with Low Contact Resistance Graphite Electrodes.

Contact resistance is a multifaceted challenge faced by the 2D materials community. Large Schottky barrier heights and gap-state pinning are active obstacles that require an integrated approach to achieve the development of high-performance electronic devices based on 2D materials. In this work, we present semiconducting PtSe2 field effect transistors with all-van-der-Waals electrode and dielectric interfaces. We use graphite contacts, which enable high ION/IOFF ratios up to 109 with currents above 100 µA µm-1 and mobilities of 50 cm2 V-1 s-1 at room temperature and over 400 cm2 V-1 s-1 at 10 K. The devices exhibit high stability with a maximum hysteresis width below 36 mV nm-1. The contact resistance at the graphite-PtSe2 interface is found to be below 700 Ω µm. Our results present PtSe2 as a promising candidate for the realization of high-performance 2D circuits built solely with 2D materials.

Stretchable Electrodes for Interconnects in Soft Electronics.

Soft electronics have significantly enhanced user convenience and data accuracy in wearable devices, implantable devices, and human-machine interfaces. However, a persistent challenge in their development has been the disconnection between the rigid and soft components of devices due to the substantial difference in modulus and stretchability. To address this issue, establishing a durable and flexible connection that smoothly links components of varying stiffness to signal-capturing sections with a lower stiffness is essential. In this study, we developed a novel stretchable interconnect that strongly adheres to various materials, facilitating electrical connections effortlessly by applying minimal finger pressure. Capable of stretching up to 1000% while maintaining electrical integrity, this interconnect proves its applicability across multiple domains, including electrocardiogram (ECG), electromyography (EMG), and stretchable light-emitting diode (LED) circuits. Its versatility is further demonstrated through its compatibility with various manufacturing techniques such as 3D printing, painting, and spin coating, highlighting its adaptability in soft electronics.

Planar Zn-Ion Microcapacitors with High-Capacity Activated Carbon Anode and VO2 (B) Cathode.

The downsizing of microscale energy storage devices plays a crucial role in powering modern emerging devices. Therefore, the scientific focus on developing high-performance microdevices, balancing energy density and power density, becomes essential. In this context, we explore an advanced Microplotter technique to fabricate hybrid planar Zn-ion microcapacitors (ZIMCs) that exhibit dual charge storage characteristics, with an electrical double layer capacitor type activated carbon anode and a battery type VO2 (B) cathode, aiming to achieve energy density surpassing supercapacitors and power density exceeding batteries. Effective loading of VO2 (B) cathode electrode materials combined with activated carbon anode onto confined planar microelectrodes not only provides reversible Zn2+ storage performance but also mitigates dendrite formation. This not only results in superior charge storage performance, including areal energies of 2.34 µWh/cm2 (at 74.76 µW/cm2) and 0.94 µWh/cm2 (at 753.12 µW/cm2), exceeding performance of zinc nanoparticle anode and activated carbon cathode based ZIMCs, but also ensures stable capacity retention of 87% even after 1000 cycles and free from any unwanted dendrites. Consequently, this approach is directed toward the development of high-performance ZIMCs by exploring high-capacity materials for efficient utilization on microelectrodes and achieving maximum possible capacities within the constraints of the limited device footprint.

Advanced Porous Gold-PANI Micro-Electrodes for High-Performance On-Chip Micro-Supercapacitors.

The downsizing of microscale energy storage devices is crucial for powering modern on-chip technologies by miniaturizing electronic components. Developing high-performance microscale energy devices, such as micro-supercapacitors, is essential through processing smart electrodes for on-chip structures. In this context, we introduce porous gold (Au) interdigitated electrodes (IDEs) as current collectors for micro-supercapacitors, using polyaniline as the active material. These porous Au IDE-based symmetric micro-supercapacitors (P-SMSCs) show a remarkable enhancement in charge storage performance, with a 187% increase in areal capacitance at 2.5 mA compared to conventional flat Au IDE-based devices, despite identical active material loading times. Our P-SMSCs achieve an areal capacitance of 60 mF/cm2, a peak areal energy density of 5.44 µWh/cm2, and an areal power of 2778 µW/cm2, surpassing most reported SMSCs. This study advances high-performance SMSCs by developing highly porous microscale planar current collectors, optimizing microelectrode use, and maximizing capacity within a compact footprint.

Enabling Extreme Low-Temperature (≤ -100 °C) Battery Cycling with Niobium Tungsten Oxides Electrode and Tailored Electrolytes.

The degradation of current Li-ion batteries (LIBs) hinders their use in electronic devices, electric vehicles, and other applications at low temperatures, particularly in extreme environments like the polar regions and outer space. This study presents a pseudocapacitive-type niobium tungsten oxides (NbWO) electrode material combined with tailored electrolytes, enabling extreme low-temperature battery cycling for the first time. The synthesized NbWO material exhibits analogous structural properties to previous studies. Its homogenous atom distribution can further facilitate Li+ diffusion, while its pseudocapacitive Li+ storage mechanism enables faster Li+ reactions. Notably, the NbWO electrode material exhibits remarkable battery performance even at -60 and -100 °C, showcasing capacities of ≈90 and ≈75 mAh g-1 , respectively. The electrolytes, which have demonstrated favorable Li+ transport attributes at low temperatures in the earlier investigations, now enable extreme low-temperature battery operations, a feat not achievable with either NbWO or the electrolytes independently. Moreover, the outcomes extend to -120 °C and encompass a pouch-type cell configuration at -100 °C, albeit with reduced performance. This study highlights the potential of NbWO for developing batteries for their use in extremely frigid environments.

Improving Wettability at Positive Electrodes to Enhance the Cycling Stability of Bi-Based Liquid Metal Batteries.

Liquid metal batteries (LMBs) are promising candidates for grid-scale energy storage due to their exceptional kinetics, scalability, and long lifespan derived from the distinctive three-liquid-layer structure. However, the positive electrode (such as Bi) suffers from insufficient wettability on the current collector, resulting in excess electrical resistance and uneven current distribution, thus deteriorating the cycling stability. Here the incorporation of 4 mol% Se into Bi-based metal is proposed producing an interface layer with highly surface-active property that decreases the electrode's contact angle with the 304 stainless-steel (SUS304) from 144.7° to 74.3°, so as to improve the wettability. The as-prepared 20 Ah Li || Bi-Se4 (the content of Se is 4 mol% of Bi) cell cycled 1200 times with capacity fade rate of merely 0.00174% per cycle. This facile and effective approach provides a pathway toward the production of stable cells with an extended lifespan and boosts the practical implementation of LMBs.

Effect of Potential on the Nanostructure Dynamics of Ethylammonium Nitrate at a Graphite Electrode.

Video-rate atomic force microscopy (AFM) is used to study the near-surface nanostructure dynamics of the ionic liquid ethylammonium nitrate (EAN) at a highly oriented pyrolytic graphite (HOPG) electrode as a function of potential in real-time for the first time. The effects of varying the surface potential and adding 10 wt% water on the nanostructure diffusion coefficient are probed. For both EAN and the 90 wt% EAN-water mixture, disk-like features ≈9 nm in diameter and 1 nm in height form above the Stern layer at all potentials. The nanostructure diffusion coefficient increases with potential (from OCP -0.5 V to OCP +0.5 V) and with added water. Nanostructure dynamics depends on both the magnitude and direction of the potential change. Upon switching the potential from OCP -0.5 V to OCP +0.5 V, a substantial increase in the diffusion coefficients is observed, likely due to the absence of solvophobic interactions between the nitrate (NO3 - ) anions and the ethylammonium (EA+ ) cations in the near-surface region. When the potential is reversed, EA+ is attracted to the Stern layer to replace NO3 - , but its movement is hindered by solvophobic attractions. The outcomes will aid applications, including electrochemical devices, catalysts, and lubricants.

Self-Assembled Molecular Layers as Interfacial Engineering Nanomaterials in Rechargeable Battery Applications.

Rechargeable batteries have transformed human lives and modern industry, ushering in new technological advancements such as mobile consumer electronics and electric vehicles. However, to fulfill escalating demands, it is crucial to address several critical issues including energy density, production cost, cycle life and durability, temperature sensitivity, and safety concerns is imperative. Recent research has shed light on the intricate relationship between these challenges and the chemical processes occurring at the electrode-electrolyte interface. Consequently, a novel approach has emerged, utilizing self-assembled molecular layers (SAMLs) of meticulously designed molecules as nanomaterials for interface engineering. This research provides a comprehensive overview of recent studies underscoring the significant roles played by SAML in rechargeable battery applications. It discusses the mechanisms and advantageous features arising from the incorporation of SAML. Moreover, it delineates the remaining challenges in SAML-based rechargeable battery research and technology, while also outlining future perspectives.

Toward Conductive Additive Free Organic Electrode for Lithium-Ion Battery Using Supramolecular Columnar Organization.

With the aim to meet the greatest challenge facing organic batteries, namely the low conductivity of the electrodes, the electrochemical properties of a series of substituted perylene diimides able to form semi-conductive columnar material are investigated. Depending on the substituent group, a strong influence of this group on the reversibility, redox potential but especially on the gravimetric capacity of the electrodes is observed. In the case of substitution by a simple propyl group, the corresponding diimide shows a complete electrochemical activity with only 10% by mass of conductive additive and even shows a half-capacity activity without any additive and without particular electrode engineering. Extensive research has highlighted the intrinsic reactivity of the columnar material but also its perpetual rearrangement during charge/discharge cycles. This study shows that the amount of conductive additive can be significantly reduced by adapting the design of the molecular material and favoring the assembly of redox units in the form of a conductive column.

Advanced Functionalized Materials Based on Layer-by-Layer Assembled Natural Cellulose Nanofiber for Electrodes: A Review.

The depletion of fossil fuel resources and its impact on the environment provide a compelling motivation for the development of sustainable energy sources to meet the increasing demand for energy. Accordingly, research and development of energy storage devices have emerged as a critical area of focus. The electrode materials are critical in the electrochemical performance of energy storage devices, such as energy storage capacity and cycle life. Cellulose nanofiber (CNF) represents an important substrate with potentials in the applications of green electrode materials due to their environmental sustainability and excellent compatibility. By utilizing the layer-by layer (LbL) process, well-defined nanoscale multilayer structure is prepared on a variety of substrates. In recent years, increasing attention has focused on electrode materials produced from LbL process on CNFs to yield electrodes with exceptional properties, such as high specific surface area, outstanding electrical conductivity, superior electrochemical activity, and exceptional mechanical stability. This review provides a comprehensive overview on the development of functional CNF via the LbL approach as electrode materials.

Reinforcement of Positive Electrode-Electrolyte Interface without Using Electrolyte Additives Through Thermoelectrochemical Oxidation of LiPF6 for Lithium Secondary Batteries.

Owing to the limited electrochemical stability window of carbonate electrolytes, the initial formation of a solid electrolyte interphase and surface film on the negative and positive electrode surfaces by the decomposition of the electrolyte component is inevitable for the operation of lithium secondary batteries. The deposited film on the surface of the active material is vital for reducing further electrochemical side reactions at the surface; hence, the manipulation of this formation process is necessary for the appropriate operation of the assembled battery system. In this study, the thermal decomposition of LiPF6 salt is used as a surface passivation agent, which is autocatalytically formed during high-temperature storage. The thermally formed difluorophosphoric acid is subsequently oxidized on the partially charged high-Ni positive electrode surface, which improves the cycleability of lithium metal cells via phosphorus- and fluorine-based surface film formation. Moreover, the improvement in the high-temperature cycleability is demonstrated by controlling the formation process in the lithium-ion pouch cell with a short period of high-temperature storage before battery usage.

Binder-Free LiMn2 O4 Nanosheets on Carbon Cloth for Selective Lithium Extraction from Brine via Capacitive Deionization.

In this study, a three-step strategy including electrochemical cathode deposition, self-oxidation, and hydrothermal reaction is applied to prepare the LiMn2 O4 nanosheets on carbon cloth (LMOns@CC) as a binder-free cathode in a hybrid capacitive deionization (CDI) cell for selectively extracting lithium from salt-lake brine. The binder-free LMOns@CC electrodes are constructed from dozens of 2D LiMn2 O4 nanosheets on carbon cloth substrates, resulting in a uniform 2D array of highly ordered nanosheets with hierarchical nanostructure. The charge/discharge process of the LMOns@CC electrode demonstrates that visible redox peaks and high pseudocapacitive contribution rates endow the LMOns@CC cathode with a maximum Li+ ion electrosorption capacity of 4.71 mmol g-1 at 1.2 V. Moreover, the LMOns@CC electrode performs outstanding cycling stability with a high-capacity retention rate of 97.4% and a manganese mass dissolution rate of 0.35% over ten absorption-desorption cycles. The density functional theory (DFT) theoretical calculations verify that the Li+ selectivity of the LMOns@CC electrode is attributed to the greater adsorption energy of Li+ ions than other ions. Finally, the selective extraction performance of Li+ ions in natural Tibet salt lake brine reveals that the LMOns@CC has selectivity ( α Mg 2 + Li + $\alpha _{{\mathrm{Mg}}^{2 + }}^{{\mathrm{Li}}^ + }$ = 7.48) and excellent cycling stability (100 cycles), which would make it a candidate electrode for lithium extraction from salt lakes.

Printable Counter Electrode with Metal Nitride as the Conductive Medium for Perovskite Solar Cells.

Perovskite solar cells (PSCs) with a booming high power conversion efficiency (PCE) are on their road toward industrialization. A proper design of the counter electrode (CE) with low cost, high conductivity, chemical stability, and good interface contact with the other functional layer atop the perovskite layer is vital for the overall performance of PSCs. Herein, the application of titanium nitride (TiN) is reported as a conductive medium for the printable CE in hole-conductor-free mesoscopic PSCs. TiN improves the conductivity of the CE and reduces the resistivity from 20 to 10 mΩ∙cm. TiN also improves the wettability of the CE with perovskite and enhances the back interface contact, which promotes charge collection. On the other hand, TiN is chemically stable during processing and undergoes no distinguishable chemical reaction with halide perovskite. Devices with TiN as the conductive media in the CE deliver a champion PCE of 19.01%. This work supplies a considerable choice for the CE design of PSCs toward industrial applications.

Binder-Free MOF-Based and MOF-Derived Nanoarrays for Flexible Electrochemical Energy Storage: Progress and Perspectives.

The fast development of Internet of Things and the rapid advent of next-generation versatile wearable electronics require cost-effective and highly-efficient electroactive materials for flexible electrochemical energy storage devices. Among various electroactive materials, binder-free nanostructured arrays have attracted widespread attention. Featured with growing on a conductive and flexible substrate without using inactive and insulating binders, binder-free 3D nanoarray electrodes facilitate fast electron/ion transportation and rapid reaction kinetics with more exposed active sites, maintain structure integrity of electrodes even under bending or twisted conditions, readily release generated joule heat during charge/discharge cycles and achieve enhanced gravimetric capacity of the whole device. Binder-free metal-organic framework (MOF) nanoarrays and/or MOF-derived nanoarrays with high surface area and unique porous structure have emerged with great potential in energy storage field and been extensively exploited in recent years. In this review, common substrates used for binder-free nanoarrays are compared and discussed. Various MOF-based and MOF-derived nanoarrays, including metal oxides, sulfides, selenides, nitrides, phosphides and nitrogen-doped carbons, are surveyed and their electrochemical performance along with their applications in flexible energy storage are analyzed and overviewed. In addition, key technical issues and outlooks on future development of MOF-based and MOF-derived nanoarrays toward flexible energy storage are also offered.

Rational Design of High-Loading Electrodes with Superior Performances Toward Practical Application for Energy Storage Devices.

High-loading electrodes play a crucial role in designing practical high-energy batteries as they reduce the proportion of non-active materials, such as current separators, collectors, and battery packaging components. This design approach not only enhances battery performance but also facilitates faster processing and assembly, ultimately leading to reduced production costs. Despite the existing strategies to improve rechargeable battery performance, which mainly focus on novel electrode materials and high-performance electrolyte, most reported high electrochemical performances are achieved with low loading of active materials (<2 mg cm-2). Such low loading, however, fails to meet application requirements. Moreover, when attempting to scale up the loading of active materials, significant challenges are identified, including sluggish ion diffusion and electron conduction kinetics, volume expansion, high reaction barriers, and limitations associated with conventional electrode preparation processes. Unfortunately, these issues are often overlooked. In this review, the mechanisms responsible for the decay in the electrochemical performance of high-loading electrodes are thoroughly discussed. Additionally, efficient solutions, such as doping and structural design, are summarized to address these challenges. Drawing from the current achievements, this review proposes future directions for development and identifies technological challenges that must be tackled to facilitate the commercialization of high-energy-density rechargeable batteries.

Tailored Polypyrrole Nanofibers as Ion-to-Electron Transduction Membranes for Wearable K+ Sensors.

Conductive polymers are recognized as ideal candidates for the development of noninvasive and wearable sensors for real-time monitoring of potassium ions (K+) in sweat to ensure the health of life. However, the low ion-to-electron transduction efficiency and limited active surface area hamper the development of high-performance sensors for low-concentration K+ detection in the sweat. Herein, a wearable K+ sensor is developed by tailoring the nanostructure of polypyrrole (PPy), serving as an ion-to-electron transduction layer, for accurately and stably tracing the K+ fluctuation in human sweat. The PPy nanostructures can be tailored from nanospheres to nanofibers by controlling the supramolecular assembly process during PPy polymerization. Resultantly, the ion-to-electron transduction efficiency (17-fold increase in conductivity) and active surface area (1.3-fold enhancement) are significantly enhanced, accompanied by minimized water layer formation. The optimal PPy nanofibers-based K+ sensor achieved a high sensitivity of 62 mV decade-1, good selectivity, and solid stability. After being integrated with a temperature sensor, the manufactured wearable sensor realized accurate monitoring of K+ fluctuation in the human sweat.

Stretchable Tissue-Like Gold Nanowire Composites with Long-Term Stability for Neural Interfaces.

Soft and stretchable nanocomposites can match the mechanical properties of neural tissue, thereby minimizing foreign body reactions to provide optimal stimulation and recording specificity. Soft materials for neural interfaces should simultaneously fulfill a wide range of requirements, including low Young's modulus (<<1 MPa), stretchability (≥30%), high conductivity (>> 1000 S cm-1), biocompatibility, and chronic stability (>> 1 year). Current nanocomposites do not fulfill the above requirements, in particular not the combination of softness and high conductivity. Here, this challenge is addressed by developing a scalable and robust synthesis route based on polymeric reducing agents for smooth, high-aspect ratio gold nanowires (AuNWs) of controllable dimensions with excellent biocompatibility. AuNW-silicone composites show outstanding performance with nerve-like softness (250 kPa), high conductivity (16 000 S cm-1), and reversible stretchability. Soft multielectrode cuffs based on the composite achieve selective functional stimulation, recordings of sensory stimuli in rat sciatic nerves, and show an accelerated lifetime stability of >3 years. The scalable synthesis method provides a chemically stable alternative to the widely used AgNWs, thereby enabling new applications within electronics, biomedical devices, and electrochemistry.

Carbon Structure Regulation Strategy for the Electrode of Vanadium Redox Flow Battery.

Vanadium redox flow battery (VRFB) is a type of energy storage device known for its large-scale capacity, long-term durability, and high-level safety. It serves as an effective solution to address the instability and intermittency of renewable energy sources. Carbon-based materials are widely used as VRFB electrodes due to cost-effectiveness and well-stability. However, pristine electrodes need proper modification to overcome original poor hydrophilicity and fewer reaction active sites. Adjusting the carbon structure is recognized as a viable method to boost the electrochemical activity of electrodes. This review delves into the advancements in research related to ordered and disordered carbon structure electrodes including the adjusting methods, structural characteristics, and catalytic properties. Ordered carbon structures are categorized into nanoscale and macroscale orderliness based on size, leading to improved conductivity and overall performance of the electrode. Disordered carbon structures encompass methods such as doping atoms, grafting functional groups, and creating engineered holes to enhance active sites and hydrophilicity. Based on the current research findings on carbon electrode structures, this work puts forth some promising prospects for future feasibility.