Synergistic removal of total petroleum hydrocarbons and antibiotic resistance genes in Yellow River Delta wetlands contaminated soil composting regulated by biogas slurry addition.

The interactive effects between the emerging contaminant antibiotic resistance genes (ARGs) and the traditional pollutant total petroleum hydrocarbons (TPHs) in contaminated soils remain unclear. The synergistic removal of TPHs and ARGs from composted contaminated soil, along with the microbial mechanisms driven by the addition of biogas slurry, have not yet been investigated. This study explored the impact of biogas slurry on the synergistic degradation mechanisms and bacterial community dynamics of ARGs and TPHs in compost derived from contaminated soil. The addition of biogas slurry resulted in a reduction of targeted ARGs and mobile genetic elements (MGEs) by 9.96%-95.70% and 13.32%-97.66%, respectively. Biogas slurry changed the succession of bacterial communities during composting, thereby reducing the transmission risk of ARGs. Pseudomonas, Cellvibrio, and Devosia were identified as core microorganisms in the synergistic degradation of ARGs and TPHs. According to the partial least squares path model, temperature and NO3- indirectly influenced the removal of ARGs and TPHs by directly regulating the abundance and composition of host microbes and MGEs. In summary, the results of this study contribute to the high-value utilization of biogas slurry and provide methodological support for the low-cost remediation of contaminated soils.

Organic matter sources and distribution along land-use gradient in a Himalayan foothills River: Insights from molecular markers.

The analysis of hydrocarbon biomarkers in surface sediments along the Markanda River in the foothills of the Indian Himalayas was conducted to gain insights into the distribution and composition of organic matter (OM) within the sediments. This investigation is essential for comprehending how anthropogenic changes are influencing the OM dynamics in river systems. The study involved identification and quantification of various compound groups such as n-alkanes, hopanes, steranes, polycyclic aromatic hydrocarbons (PAHs), linear alkyl benzenes (LABs) and phthalate esters along with their respective parametric ratios. The variation in distribution of n-alkanes and associated indices (odd-even carbon number predominance (OEP), average chain length (ACL), terrigenous to aquatic ratio (TAR), carbon preference index (CPI), and natural n-alkanes ratio (NAR)) were used to distinguish the natural source of organic content from those influenced by anthropogenic contamination. The detection of petroleum contamination was indicated by the presence of prominent unresolved complex mixtures (UCM) as well as specific petroleum biomarkers such as hopanes, diasteranes, and steranes. The study revealed varying concentrations of the analyzed organic pollutants, with the average of PAHs at 24.6 ng/g dw, LABs at 18.1 ng/g dw, and phthalates at 8.3 µg/g dw. The variability in concentration of the investigated compound groups across different locations indicated spatial heterogeneity, and the land use patterns appears to modulate the sources of OM in surface sediments. The source contribution of PAHs and phthalates determined by positive matrix factorization (PMF) shows the predominant sources of the anthropogenic hydrocarbons were linked primarily to petroleum/petroleum-derived products emissions, industrial discharges, cultural practices and common household waste/sewage disposal. This analysis provides insights for developing mitigation strategies and informing relevant policy changes globally, thereby contributing to the broader understanding of anthropogenic impacts on water ecosystems.

An improved process for removal and recovery of heavy petroleum from solids using a ferrate-based hybrid oxidant.

Persulfate oxidants are widely used in soil remediation and wastewater treatment but perform poorly in degrading polycyclic aromatic hydrocarbons (PAHs), especially heavy fractions in solids. Herein, we propose the utilization of a green peroxymonosulfate-ferrate-FeS (PFI) oxidant as a promising process aid for remediating soils contaminated with heavy petroleum components, including asphaltenes and resins. The PFI oxidant could degrade heavy petroleum fractions because of dual activation of the peroxymonosulfate and ferrate by FeS at ambient conditions. Nevertheless, when dealing with soil with high oil content (>10%), the degradation efficiency remains limited (<30%) regardless of the quantity of oxidants employed. Surface elemental analysis shows that a coating of secondary products (Fe(OH)3, Fe2O3) on the surface and in pores of the soil-pollutant matrix explains the failure of oxidation and inefficient use of oxidant. To address this issue, a strategy of pre-solvent extraction-oxidation hybrid process with sequent acidic washing is proposed, where dichloromethane serves as the solvent, and PFI acts as the oxidant. In this system over 90% of the oil could be recovered with an oxidation efficiency of 80% by alleviating the problem of iron oxide coating the matrix surface. The oxidant consumption is also reduced to 70 wt% of the sludge. The PFI oxidant is found to exhibit excellent universality in treating oily sludge with low petroleum content (<2%), reducing the petroleum content in the residue to less than 0.3 wt% (meeting the national standards). The degradation of low oil content sludge by the PFI oxidant followed pseudo first-order kinetics. These findings not only elucidate the failure of PFI oxidation for high oil content oily sludge and identify its potential engineering application range, but also offer a practical strategy for processing petroleum-contaminated soil with varying oil contents through wet oxidation.

Fungal-bacterial consortia: A promising strategy for the removal of petroleum hydrocarbons.

Nowadays, petroleum hydrocarbon pollution is one of the most widespread types of contamination that poses a serious threat to both public health and the environment. Among various physicochemical methods, bioremediation is an eco-friendly and cost-effective way to eliminate petroleum hydrocarbon pollutants. The successful degradation of all hydrocarbon components and the achievement of optimal efficiency are necessary for the success of this process. Using potential microbial consortia with rich metabolic networks is a promising strategy for addressing these challenges. Mixed microbial communities, comprising both fungi and bacteria, exhibit diverse synergistic mechanisms to degrade complex hydrocarbon contaminants, including the dissemination of bacteria by fungal hyphae, enhancement of enzyme and secondary metabolites production, and co-metabolism of pollutants. Compared to pure cultures or consortia of either fungi or bacteria, different studies have shown increased bioremediation of particular contaminants when combined fungal-bacterial treatments are applied. However, antagonistic interactions, like microbial competition, and the production of inhibitors or toxins can observed between members. Furthermore, optimizing environmental factors (pH, temperature, moisture, and initial contaminant concentration) is essential for consortium performance. With the advancements in synthetic biology and gene editing tools, it is now feasible to design stable and robust artificial microbial consortia systems. This review presents an overview of using microbial communities for the removal of petroleum pollutants by focusing on microbial degradation pathways, and their interactions. It also highlights the new strategies for constructing optimal microbial consortia, as well as the challenges currently faced and future perspectives of applying fungal-bacterial communities for bioremediation.

ß-Cyclodextrin enhanced bioavailability of petroleum hydrocarbons in industrially contaminated soil: A phytoremediation field study.

Low remediation efficiency due to low bioavailability is a primary restrictive factor for phytoremediation applications. Specifically, this investigation examines whether Suaeda heteroptera Kitagawa (S. heteroptera) can be used in combination with ß-cyclodextrin (ß-CD) to remediate contaminated site. The study was conducted on the growth response of S. heteroptera, bioavailability and dissipation of petroleum hydrocarbons (PHs) in soil under the influence of ß-CD Our preliminary studies confirmed that ß-CD is effective in increasing the biomass and height of plants. The presence of ß-CD could dramatically elevate polycyclic aromatic hydrocarbons (PAHs) and n-alkanes in S. heteroptera. Moreover, a remarkable positive correlation between PHs levels in roots with the dosage of ß-CD and a negative correlation between the PHs levels in roots with KOW of PHs have been observed. The dissipation of n-alkanes was estimated to be 38.73-62.27%, and the dissipation of PAHs was 36.59-60.10%. In addition, the dissipation behavior of n-alkanes and PAHs was well agreement with the first-order kinetic model. These results display that applying ß-CD accelerated the desorption process of PHs from soil and promoted the absorption process of PHs onto the root epidermis. The enhancement of phytoremediation was achieved by increasing the bioavailability of PHs.

There has been an increasing concern regarding soil contamination by petroleum hydrocarbons (PHs) released by industrial activities. The study attempted to investigate how ß-CD affects the phytoremediation of PHs-contaminated sites. The findings of this study offer an environmentally friendly and cost-effective method of phytoremediating industrially contaminated sites using ß-CD enhanced-phytoremediation.

Bioremediation experiments and dynamic model of petroleum hydrocarbon contaminated soil.

Clarifying the occurrence and morphological characteristics of petroleum hydrocarbons (PHs) in soil can facilitate a comprehensive understanding of their migration and transformation patterns in soil/sediment. Additionally, by establishing the dynamic transformation process of each occurrence state, the ecological impact and environmental risk associated with PHs in soil/sediment can be assessed more precisely. The adsorption experiments and closed static incubation experiments was carried out to explore the PHs degradation and fraction distribution in aged contaminated soil under two remediation scenarios of natural attenuation (NA) and bioaugmentation (BA) by exogenous bacteria through a new sequential extraction method based on Tenax-TA, Hydroxypropyl-ß-cyclodextrin and Rhamnolipid (HPCD/RL), accelerated solvent extractor (ASE) unit and alkaline hydrolysis extraction. The adsorption experiment results illustrated that bioaugmentation could promote the desorption of PHs in the adsorption phase, and the soil-water partition coefficient Kd decreased from 0.153 L/g to 0.092 L/g. The incubation experiment results showed that compared with natural attenuation, bioaugmentation could improve the utilization of PHs in aged soil and promote the generation of non-extractable hydrocarbons. On the 90th day of the experiment, the concentrations of weakly adsorbed hydrocarbons in the natural attenuation and bioaugmentation experimental groups decreased by 46.44% and 87.07%, respectively, while the concentrations of strongly adsorbed hydrocarbons and non-extractable hydrocarbons increased by 77.93%, 182.14%, and 80.91%, and 501.19%, respectively, compared their initial values. We developed a novel dynamic model and inverted the kinetic parameters of the model by the parameter scanning function and the Markov Chain Monte Carlo (MCMC) method based on the Bayesian approach in COMSOL Multiphysics® finite element software combined with experimental data. There was a good linear relationship between experimental interpolation data and model prediction data. The R2 for the concentrations of weakly adsorbed hydrocarbons ranged from 0.9953 to 0.9974, for strongly adsorbed hydrocarbons from 0.9063 to 0.9756, and for non-extractable hydrocarbons from 0.9931 to 0.9982. These extremely high correlation coefficients demonstrate the high accuracy of the parameters calculated using the Bayesian inversion method.

Activation of persulfate by g-C3N4/nZVI@SBC for degradation of total petroleum hydrocarbon in groundwater.

In this study, we synthesized a high removal efficiency catalyst using biochar-supported nanoscale zero-valent iron and g-C3N4, denoted as g-C3N4/nZVI@SBC, to activate persulfate (PS) for the degradation of total petroleum hydrocarbon (TPH) in groundwater. We characterized the morphology and physiochemical properties of g-C3N4/nZVI@SBC with scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR), BET surface area analysis, and X-ray photoelectron spectroscopy (XPS). To assess the performance of the g-C3N4/nZVI@SBC catalyst, we investigated various reaction parameters, such as the mass ratio of g-C3N4 to nZVI@SBC, PS concentration, initial pH, initial TPH concentration, and the presence of coexisting ions in the system. The results from batch experiments and repeated use trials indicate that g-C3N4/nZVI@SBC exhibited both excellent catalytic activation capability and impressive durability, making it a promising choice for TPH degradation. Specifically, when the PS concentration reached 1 mM, the catalyst dosage was 0.3 g/L, and the g-C3N4 to nZVI@SBC mass ratio was 2, we achieved a remarkable TPH removal efficiency of 93.8%. Through electron paramagnetic resonance (EPR) testing and quenching experiments, we identified sulfate radicals, hydroxyl radicals, and superoxide radicals as the primary active substance involved in the TPH degradation process. Moreover, the g-C3N4/nZVI@SBC composite proved highly effective for in-situ TPH removal from groundwater and displayed an 86% removal rate, making it a valuable candidate for applications in permeable reactive barriers (PRB) aimed at enhancing environmental remediation. In summary, by skillfully utilizing g-C3N4/nZVI@SBC, this study has made notable advancements in synthesis and characterization, presenting a feasible and innovative approach to addressing TPH pollution in groundwater.

Evaluating and modeling the efficacy of Stipagrostis plumosa for the phytoremediation of petroleum compounds in crude oil-contaminated soil.

This study focused on using Stipagrostis plumosa for phytoremediation to eliminate total petroleum hydrocarbons (TPHs) and heavy metals (HMs) like cadmium (Cd), chromium (Cr), lead (Pb), and nickel (Ni) from oil-contaminated soil. Conducted over six months at a field-scale without artificial pollutants, soil samples were analyzed using gas chromatography‒mass spectrometry (GC‒MS) for TPHs and inductively coupled plasma-optical emission spectroscopy (ICP‒OES) for HMs. Results after six months revealed that plots with plants had significantly higher average removal percentages for TPHs (61.45%), Cd (39.4%), Cr (46.1%), Pb (41.5%), and Ni (44.2%) compared to the control group (p <0.05). Increased microbial respiration and bacteria populations in planted plots indicated enhanced soil microbial growth. Kinetic rate models aligned well with the first-order kinetic rate model for all pollutants (R2 >0.9). Overall, the study demonstrates that S. plumosa can effectively reduce TPHs and HMs in oil-contaminated soil, making it a promising option for pollutant absorption.

Ecotoxicological effects, human and animal health risks of pollution and exposure to waste engine oils: a review.

Waste engine oils are hazardous waste oils originating from the transportation sector and industrial heavy-duty machinery operations. Improper handling, disposal, and miscellaneous misuses cause significant air, soil, sediments, surface water, and groundwater pollution. Occupational exposure by prolonged and repeated contact poses direct or indirect health risks, resulting in short-term (acute) or long-term (chronic) toxicities. Soil pollution causes geotoxicity by disrupting the biocenosis and physicochemical properties of the soil, and phytotoxicity by impairing plant growth, physiology and metabolism. Surface water pollution impacts aquatic ecosystems and biodiversity. Air pollution from incineration causes the release of greenhouse gases creating global warming, noxious gases and particulate matter eliciting pulmonary disorders. The toxicity of waste engine oil is due to the total petroleum hydrocarbons (TPH) composition, including polycyclic aromatic hydrocarbons (PAHs), benzene, toluene, ethylbenzene, xylene (BTEX), polychlorinated biphenyls (PCBs) congeners, organometallic compounds, and toxic chemical additives. The paper aims to provide a comprehensive overview of the ecotoxicological effects, human and animal health toxicology and exposure to waste engine oils. It highlights the properties and functions of engine oil and describes waste engine oil generation, disposal and recycling. It provides intensive evaluations and descriptions of the toxicokinetics, metabolism, routes of exposure and toxicosis in human and animal studies based on toxicological, epidemiological and experimental studies. It emphasises the preventive measures in occupational exposure and recommends risk-based remediation techniques to mitigate environmental pollution. The review will assist in understanding the potential risks of waste engine oil with significant consideration of the public health benefits and importance.

Enhancement of benzo[a]pyrene mineralization: symbiotic biodegradation by Acinetobacter sp. strain HAP1 in Association with Cyanobacteriota sp. S66.

The ability of Acinetobacter sp. strain HAP1, isolated from petroleum refinery effluent, to eliminate different concentrations (20, 40, 60, 80 and 100 mg/L) of Benzo[a]Pyrene degradation (BaP) was studied. A test to improve this degradation capacity was carried out by culturing the bacterial strain in association with a cyanobacteria. The results show a highly significant effect of the concentration of (BaP) and a very highly significant effect of the symbiosis between the bacterial strain and the cyanobacteria. This combination was able to significantly improve the (BaP) degradation rate by up to 18%. This degradation and especially in association leads to a complete mineralization of (BaP) and there is a difference in yield that can go up to 15%. Through molecular identification based on 16S rRNA gene sequence analysis, strains HAP1 and S66 were recognized as Acinetobacter sp. strain HAP1 and Cyanobacteriota sp. S66, respectively. Comparison of the retrieved sequences with the NCBI GenBank database was done, and the closest matches were found to be Acinetobacter pittii strain JD-10 for bacteria and Pseudochroococcus couteii strain PMC 885.14 for cyanobacteria.

Biosurfactant production by Bacillus cereus GX7 utilizing organic waste and its application in the remediation of hydrocarbon-contaminated environments.

The use of biosurfactants represents a promising technology for remediating hydrocarbon pollution in the environment. This study evaluated a highly effective biosurfactant strain-Bacillus cereus GX7's ability to produce biosurfactants from industrial and agriculture organic wastes. Bacillus cereus GX7 showed poor utilization capacity for oil soluble organic waste but effectively utilized of water- soluble organic wastes such as starch hydrolysate and wheat bran juice as carbon sources to enhance biosurfactant production. This led to significant improvements in surface tension and emulsification index. Corn steep liquor was also effective as a nitrogen source for Bacillus cereus GX7 in biosurfactant production. The biosurfactants produced by strain Bacillus cereus GX7 demonstrated a remediation effect on oily beach sand, but are slightly inferior to chemical surfactants. Inoculation with Bacillus cereus GX7 (70.36%) or its fermentation solution (94.38%) effectively enhanced the degradation efficiency of diesel oil in polluted seawater, surpassing that of indigenous degrading bacteria treatments (57.62%). Moreover, inoculation with Bacillus cereus GX7's fermentation solution notably improved the community structure by increasing the abundance of functional bacteria such as Pseudomonas and Stenotrophomonas in seawater. These findings suggest that the Bacillus cereus GX7 as a promising candidate for bioremediation of petroleum hydrocarbons.

In situ bioremediation of petroleum hydrocarbon-contaminated soil: isolation and application of a Rhodococcus strain.

Due to low consumption and high efficiency, in situ microbial remediation of petroleum hydrocarbons (PHs)-contaminated sites in in-service petrochemical enterprises has attracted more and more attention. In this study, a degrading strain was isolated from oil depot-contaminated soil with soil extract (PHs) as the sole carbon source, identified and named Rhodococcus sp. OBD-3. Strain OBD-3 exhibited wide adaptability and degradability over a wide range of temperatures (15-37 °C), pH (6.0-9.0), and salinities (1-7% NaCl) to degrade 60.6-86.6% of PHs. Under extreme conditions (15 °C and 3-7% salinity), PHs were degraded by 60.6 ± 8.2% and more than 82.1% respectively. In OBD-3, the alkane monooxygenase genes alkB1 and alkB2 (GenBank accession numbers: MZ688386 and MZ688387) were found, which belonged to Rhodococcus by sequence alignment. Moreover, strain OBD-3 was used in lab scale remediation in which the contaminated soil with OBD-3 was isolated as the remediation object. The PHs were removed at 2,809 ± 597 mg/kg within 2 months, and the relative abundances of Sphingobium and Pseudomonas in soil increased more than fivefold. This study not only established a system for the isolation and identification of indigenous degrading strains that could efficiently degrade pollutants in the isolated environment but also enabled the isolated degrading strains to have potential application prospects in the in situ bioremediation of PHs-contaminated soils.

Chemical Weathering Patterns of Diluted Bitumen Spilled into Freshwater Limnocorrals.

Due to the sudden nature of oil spills, few controlled studies have documented how oil weathers immediately following accidental release into a natural lake environment. Here, we evaluated the weathering patterns of Cold Lake Winter Blend, a diluted bitumen (dilbit) product, by performing a series of controlled spills into limnocorrals installed in a freshwater lake in Northern Ontario, Canada. Using a regression-based design, we added seven different dilbit volumes, ranging from 1.5 to 180 L, resulting in oil-to-water ratios between 1:71,000 (v/v) and 1:500 (v/v). We monitored changes in the composition of various petroleum hydrocarbons (PHCs), including n-alkanes, polycyclic aromatic hydrocarbons (PAHs), and oil biomarkers in dilbit over time, as it naturally weathered for 70 days. Depletion rate constants (kD) of n-alkanes and PAHs ranged from 0.0009 to 0.41 d-1 and 0.0008 to 0.38 d-1, respectively. There was no significant relationship between kD and spill volume, suggesting that spill size did not influence the depletion of petroleum hydrocarbons from the slick. Diagnostic ratios calculated from concentrations of n-alkanes, isoprenoids, and PAHs indicated that evaporation and photooxidation were major processes contributing to dilbit weathering, whereas dissolution and biodegradation were less important. These results demonstrate the usefulness of large scale field studies carried out under realistic environmental conditions to elucidate the role of different weathering processes following a dilbit spill.

Biochar-Assisted Catalytic Pyrolysis of Oily Sludge to Attain Harmless Disposal and Residue Utilization for Soil Reclamation.

Pyrolysis of oily sludge (OS) is a feasible technology to match the principle of reduction and recycling; however, it is difficult to confirm the feasible environmental destination and meet the corresponding requirements. Therefore, an integrated strategy of biochar-assisted catalytic pyrolysis (BCP) of OS and residue utilization for soil reclamation is investigated in this study. During the catalytic pyrolysis process, biochar as a catalyst intensifies the removal of recalcitrant petroleum hydrocarbons at the expense of liquid product yield. Concurrently, biochar as an adsorbent can inhibit the release of micromolecular gaseous pollutants (e.g. HCN, H2S, and HCl) and stabilize heavy metals. Due to the assistance of biochar, pyrolysis reactions of OS are more likely to occur and require a lower temperature to achieve the same situation. During the soil reclamation process, the obtained residue as a soil amendment can not only provide a carbon source and mineral nutrients but can also improve the abundance and diversity of microbial communities. Thus, it facilitates the plant germination and the secondary removal of petroleum hydrocarbons. The integrated strategy of BCP of OS and residue utilization for soil reclamation is a promising management strategy, which is expected to realize the coordinated and benign disposal of more than one waste.

Phytotoxicity of weathered petroleum hydrocarbons in soil to boreal plant species.

Canada has extensive petroleum hydrocarbon (PHC) contamination in northern areas and the boreal forest region from historical oil and gas activities. Since the 2013 standardization of boreal forest species for plant toxicity testing in Canada, there has been a need to build the primary literature of the toxicity of weathered PHCs to these species. A series of toxicity experiments were carried out using fine-grained (<0.005-0.425 mm) background (100 total mg/kg total PHCs) and weathered contaminated soil (11,900 mg/kg total PHCs) collected from a contaminated site in northern Ontario, Canada. The PHC mixture in the contaminated site soil was characterized through Canadian Council of Ministers of the Environment Fractions, as indicated by the number equivalent normal straight-chain hydrocarbons (nC). The soil was highly contaminated with Fraction 2 (>nC10 to nC16) at 4790 mg/kg and Fraction 3 (>nC16 to nC34) at 4960 mg/kg. Five plant species (Elymus trachycaulus, Achillea millefolium, Picea mariana, Salix bebbiana, and Alnus viridis) were grown from seed in 0%, 25%, 50%, 75%, and 100% relative contamination mixtures of the PHC-contaminated and background soil from the site over 2-6 weeks. All five species showed significant inhibition in shoot length, shoot weight, root length, and/or root weight (Kruskal-Wallis Tests: p < 0.05, df = 4.0). Measurements of 25% inhibitory concentrations (IC25) following PHC toxicity experiments revealed that S. bebbiana was most significantly impaired by the PHC-contaminated soil (410-990 mg/kg total PHCs), where it showed <35% germination. This study indicates that natural weathering of Fraction 2- and Fraction 3-concentrated soil did not eliminate phytotoxicity to boreal plant species. Furthermore, it builds on the limited existing literature for toxicity of PHCs on boreal plants and supports site remediation to existing Canadian provincial PHC guidelines.

Thermal plasma potential to remediate soil contaminated with diesel.

Petroleum hydrocarbons (PHCs) are recognized as one of the major soil contaminants causing negative environmental impact. Thereby, PHCs remediation from the soil is essential. Hence, this experimental study aimed to assess the potential of thermal water vapor and air plasmas to remediate soil contaminated with habitually used PHCs - diesel. The impact of contaminant content in the soil on the remediation process also was estimated. The results of this research demonstrated that 99.9% contaminant removal efficiency was received proceeding diesel contaminated soil remediation in the environment of the thermal plasma in defiance of whether water vapor or air was employed as a plasma-forming gas. Moreover, the soil's contaminant content (80-160 g/kg) did not influence its' removal efficiency. The soil de-pollution process also caused the decomposition of the soils' natural carbon reserves since carbon content decreased from an initial 9.8 wt% in the clean soil to 3-6 wt% in the remediated soil. Furthermore, PHCs - diesel was decomposed into producer gas mainly consisting of H2, CO (also known as synthesis gas) and CO2. Thus, the thermal plasma offers a way not only to de-pollute the soil but also to reuse the PHCs present in the soil by breaking it down into gaseous products that can further be used to meet human needs.

Bioremediation of heavy oily sludge: a microcosms study.

Oily sludge is a residue from the petroleum industry composed of a mixture of sand, water, metals, and high content of hydrocarbons (HCs). The heavy oily sludge used in this study originated from Colombian crude oil with high density and low American Petroleum Institute (API) gravity. The residual waste from heavy oil processing was subject to thermal and centrifugal extraction, resulting in heavy oily sludge with very high density and viscosity. Biodegradation of the total petroleum hydrocarbons (TPH) was tested in microcosms using several bioremediation approaches, including: biostimulation with bulking agents and nutrients, the surfactant Tween 80, and bioaugmentation. Select HC degrading bacteria were isolated based on their ability to grow and produce clear zones on different HCs. Degradation of TPH in the microcosms was monitored gravimetrically and with gas chromatography (GC). The TPH removal in all treatments ranged between 2 and 67%, regardless of the addition of microbial consortiums, amendments, or surfactants within the tested parameters. The results of this study demonstrated that bioremediation of heavy oily sludge presents greater challenges to achieve regulatory requirements. Additional physicochemical treatments analysis to remediate this recalcitrant material may be required to achieve a desirable degradation rate.

A sustainable approach to enhance heavy hydrocarbons removal in landfarming treatment.

The present study aimed to evaluate the best strategy to enhance the degradation rate of heavy petroleum hydrocarbons (HPH) contaminated soil in a landfarming plant. Samples of real contaminated soil, further spiked with HPH, were treated in mesocosm reactors simulating the landfarming system. One reactor was operated without any modification compared to the real landfarming plant. The other three reactors were operated with different strategies to improve the removal rate: biostimulation (BS) through the addition of nitrogen and phosphorus; bioaugmentation (BA) with the inoculation of sludge produced in the treatment of the process water from the oil re-fining plant of the same industrial area; combination of biostimulation and bioaugmentation (BAS). The biostimulation (BS) was the most effective strategy, leading to a reduction of the remediation time by 35% as compared to the traditional treatment. Bioaugmentation (BA) also provided positive effects leading to a reduction of the remediation time by 24%; its performance improved further when the addition of sludge was combined with the increase of phosphorous (BAS). Therefore, the key tool was represented by the phosphorous availability, whereas the application of sludge was most useful to provide waste with a new possibility of reuse, thus fulfilling the principles of the circular economy. The final characterization showed that the treated soil was suitable for reuse in industrial areas according to the legislation in force.

Ex situ bioremediation of diesel fuel-contaminated soil in two different climates.

The petroleum industry is often faced with accidental spills and discharges that pollute valuable natural resources such as soil. The purpose of this study was to assess bioremediation potential of an on-site landfarming unit (LU), a highly economical solution that complies with the zero-waste policy, for bioremediation of the contaminated soil after an actual diesel fuel leakage in a fuel depot. The first aim was to evaluate the effects of different climates on hydrocarbon bioremediation. For this reason, a part of the contaminated soil was moved from the initial location with a sub-Mediterranean climate to an LU at another location with a temperate continental climate. Our results demonstrated that remediation in sub-Mediterranean climate is less effective than the remediation in a temperate continental climate. The second aim of this study was to evaluate the effect of different plant species on the microbial population during bioremediation. For that purpose, 365-day monitoring of phospholipid fatty acids (PLFA) was performed. Our results support the hypothesis that plant-assisted bioremediation can diminish toxic effects of diesel-polluted soil and that the changes in plant species during bioremediation cause changes in the microbial population.

The main objective of this study was to implement a landfarming bioremediation technique after an actual diesel fuel pollution in the sub-Mediterranean climate and diminish toxic effects of pollutants in soil. Since soil bioremediation is performed by soil microorganisms, their communities are primarily affected by the growing vegetation and climatic conditions. For future bioremediation strategies or ex situ approaches, it is crucial to assess the influence of a specific climate on the degradation rate of hydrocarbons in soil and select the most efficient plant species for this purpose.

Converging alfalfa (Medicago sativa L.) and petroleum hydrocarbon acclimated ACC-deaminase containing bacteria for phytoremediation of petroleum hydrocarbon contaminated soil.

Plant assisted bioremediation of petroleum hydrocarbon contaminated soil is considered an effective green technology whereby accelerated degradation occurs due to converged effect of microorganisms and plants. However, survival and growth of microbes and plants under stress conditions is challenging task for success of the technology. In this study, plant growth promoting bacteria containing 1-aminocyclopropane-1-carboxylate (ACC)-deaminase activity and tolerance to petroleum hydrocarbon contamination were used in association with alfalfa for bioremediation of petroleum hydrocarbon contaminated soil. Eight pre-isolated bacterial isolates from soil having previous history of petroleum contamination were used in convergence with alfalfa on sand soil which was artificially contaminated (10 g crude oil per kg-1 of coarse textured soil). Combined effect of bacteria and plants on the degradation of petroleum hydrocarbons under controlled conditions of light and temperature was observed for a period of 60 days. The results of the study revealed that four bacterial isolates Bacillus subtilis strain PM32Y, Bacillus cereus strain WZ3S1, Bacillus sp. strain SM73 and Bacillus sp. strain WZ3S3 in association with alfalfa significantly degraded petroleum hydrocarbons. The most significant biodegradation (47%) of petroleum hydrocarbons was recorded in the experimental unit receiving PM32Y inoculation in association with alfalfa. Biodegradation of petroleum hydrocarbons was 33% with alone inoculation (without alfalfa) of PM32Y. The study revealed that combined use of bacteria and alfalfa plant is more efficient than alone application of either bacteria or plants for degradation of petroleum hydrocarbons.

This study provides the evidence for phytoremediation and significant degradation of petroleum hydrocarbons by using plant growth promoting bacteria (PGPB), containing 1-aminocyclopropane-1-carboxylate deaminase (ACC-deaminase) in association with alfalfa (Medicago sativa L.). The most significant biodegradation of petroleum hydrocarbons was recorded with a new combination of Bacillus subtilis strain PM32Y in association with alfalfa.