Nonstoichiometry Induced Amorphous Grain Boundary of Na5SmSi4O12 Solid-State Electrolyte for Long-Life Dendrite-Free Sodium Metal Battery.

Oxide ceramics are considered promising candidates as solid electrolytes (SEs) for sodium metal batteries. However, the high sintering temperature induced boundaries and pores between angular grains lead to high grain boundary resistance and pathways for dendrite growth. Herein, we report a grain boundary modification strategy, which in situ generates an amorphous matrix among Na5SmSi4O12 oxide grains via tuning the chemical composition. The mechanical properties as well as electron mitigating capability of modified SE have been significantly enhanced. As a result, the SE achieves a room-temperature total ionic conductivity of 5.61 mS cm-1, the highest value for sodium-based oxide SEs. The Na|SE|Na symmetric cell achieves a high critical current density of 2.5 mA cm-2 and excellent cycle life over more than 2800 h at 0.15 mA cm-2 without dendrite formation. The full cell with Na3V2(PO4)3 as the cathode demonstrates impressive cycling performance, maintaining stability over 3000 cycles at 5C without observable loss of capacity.

Modulating Silver Performance in Electrocatalytic Oxidation of HCHO via SMSI between Ag-Co3O4 Interfaces.

The replacement of oxygen evolution reactions with organic molecule oxidation reactions to enable energy-efficient hydrogen production has been a subject of interest. However, further reducing reaction energy consumption and releasing hydrogen from organic molecules continue to pose significant challenges. Herein, a strategy is proposed to produce hydrogen and formic acid from formaldehyde using Ag/Co3O4 interface catalysts at the anode. The key to improving the performance of Ag-based catalysts for formaldehyde oxidation lies in the strong SMSI achieved through the well-designed "spontaneous redox reaction" between Ag and Co3O4 precursors. Nano-sized Ag particles are uniformly dispersed on Co3O4 nanosheets, and electron-deficient Agδ+ are formed by the SMSI between Ag and Co3O4. Ag/Co3O4 demonstrates exceptional formaldehyde oxidation activity at low potentials of 0.32 V versus RHE and 0.65 V versus RHE, achieving current densities of 10 and 100 mA cm-2, respectively. The electrolyzer "Ag/Co3O4||20% Pt/C" achieves over 195% hydrogen efficiency and over 98% formic acid selectivity, maintaining stable operation for 60 hours. This work not only presents a novel approach to precisely modulate Ag particle size and interface electronic structure via SMSI, but also provides a promising approach to efficient and energy-saving hydrogen production and the transformation of harmful formaldehyde.

Tuning Adsorbate-Mediated Strong Metal-Support Interaction by Oxygen Vacancy: A Case Study in Ru/TiO2.

The adsorbate-mediated strong metal-support interaction (A-SMSI) offers a reversible means of altering the selectivity of supported metal catalysts, thereby providing a powerful tool for facile modulation of catalytic performance. However, the fundamental understanding of A-SMSI remains inadequate and methods for tuning A-SMSI are still in their nascent stages, impeding its stabilization under reaction conditions. Here, we report that the initial concentration of oxygen vacancy in oxide supports plays a key role in tuning the A-SMSI between Ru nanoparticles and defected titania (TiO2-x). Based on this new understanding, we demonstrate the in situ formation of A-SMSI under reaction conditions, obviating the typically required CO2-rich pretreatment. The as-formed A-SMSI layer exhibits remarkable stability at various temperatures, enabling excellent activity, selectivity and long-term stability in catalyzing the reverse water gas-shift reaction. This study deepens the understanding of the A-SMSI and the ability to stabilize A-SMSI under reaction conditions represents a key step for practical catalytic applications.

Facile Electron Transfer in Atomically Coupled Heterointerface for Accelerated Oxygen Evolution.

An efficient and cost-effective approach for the development of advanced catalysts has been regarded as a sustainable way for green energy utilization. The general guideline to design active and efficient catalysts for oxygen evolution reaction (OER) is to achieve high intrinsic activity and the exposure of more density of the interfacial active sites. The heterointerface is one of the most attractive ways that plays a key role in electrochemical water oxidation. Herein, atomically cluster-based heterointerface catalysts with strong metal support interaction (SMSI) between WMn2 O4 and TiO2 are designed. In this case, the WMn2 O4 nanoflakes are uniformly decorated by TiO2 particles to create electronic effect on WMn2 O4 nanoflakes as confirmed by X-ray absorption near edge fine structure. As a result, the engineered heterointerface requires an OER onset overpotential as low as 200 mV versus reversible hydrogen electrode, which is stable for up to 30 h of test. The outstanding performance and long-term durability are due to SMSI, the exposure of interfacial active sites, and accelerated reaction kinetics. To confirm the synergistic interaction between WMn2 O4 and TiO2 , and the modification of the electronic structure, high-resolution transmission electron microscopy (HR-TEM), X-ray photoemission spectroscopy (XPS), and X-ray absorption spectroscopy (XAS) are used.

Switchable Tuning CO2 Hydrogenation Selectivity by Encapsulation of the Rh Nanoparticles While Exposing Single Atoms.

The switch of CO2 hydrogenation selectivity from CH4 to CO over TiO2 supported Rh catalysts is accomplished via selective encapsulation of Rh nanoparticles while exposing Rh single atoms by high-temperature reduction (HTR) according to their different strong metal-support interaction (SMSI) occurrence conditions, which can be reversed by subsequent oxidation treatment.

The Significant Role of the Atomic Surface Structure of Support in Strong Metal-Support Interaction.

Supported metal catalysts are important in many industrial reactions. It is reported that support materials are not always inert, and in some cases could even interact with metal nanoparticles (NPs) actively via various ways. In particular, the strong metal-support interaction (SMSI), referring to metal NPs covered by support materials, affects catalysis at the active sites on the metal NP surface, which can serve as a very effective method in tuning and improving catalytic performance. By tailoring the support materials or controlling the treatment processes, different kinds of SMSI, such as classical SMSI, oxidative SMSI, wet-chemistry SMSI, and adsorbate-mediated SMSI, can be achieved. This concept summarizes the general strategies to tune SMSI and discusses the key results. Moreover, a new proposal is presented to tailor SMSI by combining both the exposed facets of the support materials and external environments. Furthermore, the challenges faced at present are discussed and useful insights for future research concerning this topic are provided.

Facilitating Catalytic Purification of Auto-Exhaust Carbon Particles via the Fe2O3{113} Facet-dependent Effect in Pt/Fe2O3 Catalysts.

The purification efficiency of auto-exhaust carbon particles in the catalytic aftertreatment system of vehicle exhaust is strongly dependent on the interface nanostructure between the noble metal component and oxide supports. Herein, we have elaborately synthesized the catalysts (Pt/Fe2O3-R) of Pt nanoparticles decorated on the hexagonal bipyramid α-Fe2O3 nanocrystals with co-exposed twelve {113} and six {104} facets. The area ratios (R) of co-exposed {113} to {104} facets in α-Fe2O3 nanocrystals were adjusted by the fluoride ion concentration in the hydrothermal method. The strong Pt-Fe2O3{113} facet interaction boosts the formation of coordination unsaturated ferric sites for enhancing adsorption/activation of O2 and NO. Pt/Fe2O3-R catalysts exhibited the Fe2O3{113} facet-dependent performance during catalytic purification of soot particles in the presence of H2O. Among the catalysts, the Pt/Fe2O3-19 catalyst exhibits the highest catalytic activities (T50 = 365 °C, TOF = 0.13 h-1), the lowest apparent activation energy (69 kJ mol-1), and excellent catalytic stability during soot purification. Combined with the results of characterizations and density functional theory calculations, the catalytic mechanism is proposed: the active sites located at the Pt-Fe2O3{113} interface can boost the key step of NO oxidation to NO2. The crystal facet engineering is an effective strategy to obtain efficient catalysts for soot purification in practical applications.

Synergistic Effect between Zr-MOF and Phosphomolybdic Acid with the Promotion of TiF4 Template.

Metal-Organic Framework (MOF) materials are often modified or functionalized, and then the crystal size and morphology of MOF materials are changed. In the process of preparing UiO-66 confined phosphomolybdic acid (PMA) composites (PU), the TiF4-modified PU (PMA + UiO-66) composite catalyst (TiF4-PU) was successfully synthesized by adding titanium tetrafluoride, and the catalytic desulfurization activity was excellent. Similarly, the reaction mechanism was investigated by means of infrared spectroscopy, Raman spectroscopy, XPS, and UV/Vis spectroscopy. The results show that the addition of TiF4 not only changes the appearance and color of the catalyst, but also changes the valence distribution of the elements in the catalyst. The number of oxygen vacancies in the MOF increases due to the addition of TiF4, and more electrons are transferred from the Zr-MOF to PMA to form more Mo5+, which improved the performance of oxidative desulfurization in comparison. Thus, a stronger strong metal-support interaction (SMSI) effect is observed for TiF4-modified PU catalysts. In addition, the quenching experiment of free radicals shows that ·OH radical is the main active substance in the oxidative desulfurization reaction over TiF4-PU catalyst.

Dynamical Observation and Detailed Description of Catalysts under Strong Metal-Support Interaction.

Understanding the structures of catalysts under realistic conditions with atomic precision is crucial to design better materials for challenging transformations. Under reducing conditions, certain reducible supports migrate onto supported metallic particles and create strong metal-support states that drastically change the reactivity of the systems. The details of this process are still unclear and preclude its thorough exploitation. Here, we report an atomic description of a palladium/titania (Pd/TiO2) system by combining state-of-the-art in situ transmission electron microscopy and density functional theory (DFT) calculations with structurally defined materials, in which we visualize the formation of the overlayers at the atomic scale under atmospheric pressure and high temperature. We show that an amorphous reduced titania layer is formed at low temperatures, and that crystallization of the layer into either mono- or bilayer structures is dictated by the reaction environment and predicted by theory. Furthermore, it occurs in combination with a dramatic reshaping of the metallic surface facets.

Real-space observation of strong metal-support interaction: state-of-the-art and what's the next.

The real-space resolving of the encapsulated overlayer in the well-known model and industry catalysts, ascribed to the advent of dedicated transmission electron microscopy, enables us to probe novel nano/micro architecture chemistry for better application, revisiting our understanding of this key issue in heterogeneous catalysis. In this review, we summarize the latest progress of real-space observation of SMSI in several well-known systems mainly covered from the metal catalysts (mostly Pt) supported by the TiO2 , CeO2 and Fe3 O4 . As a comparison with the model catalyst Pt/Fe3 O4 , the industrial catalyst Cu/ZnO is also listed, followed with the suggested ongoing directions in the field.

Thermally Stable Oxide-Capsulated Metal Nanoparticles Structure for Strong Metal-Support Interaction via Ultrafast Laser Plasmonic Nanowelding.

Strong metal-support interaction (SMSI) has drawn much attention in heterogeneous catalysts due to its stable and excellent catalytic efficiency. However, construction of high-performance oxide-capsulated metal nanostructures meets great challenge in materials thermodynamic compatibility. In this work, dynamically controlled formation of oxide-capsulated metal nanoparticles (NPs) structures is demonstrated by ultrafast laser plasmonic nanowelding. Under the strong localized electromagnetic field interaction, metal (Au) NPs are dragged by an optical force toward oxide NPs (TiO2). Intense energy is simultaneously injected into this heterojunction area, where TiO2 is precisely ablated. With the embedding of metal into oxide, optical force on Au gradually turned from attractive to repulsive due to the varied metal-dielectric environment. Meanwhile, local ablated oxides are redeposited on Au NP. Upon the whole coverage of metal NP, the implantation behavior of metal NP is stopped, resulting in a controlled metal-oxide eccentric structure with capsulated oxide layer thickness ≈0.72-1.30 nm. These oxide-capsulated metal NPs structures can preserve their configurations even after thermal annealing in air at 600 °C for 10 min. This ultrafast laser plasmonic nanowelding can also extend to oxide-capsulated metal nanostructure fabrication with broad materials combinations (e.g., Au/ZnO, Au/MgO, etc.), which shows great potential in designing/constructing nanoscale high-performance catalysts.

Strong metal-support interaction (SMSI) in environmental catalysis: Mechanisms, application, regulation strategies, and breakthroughs.

The strong metal-support interaction (SMSI) in supported catalysts plays a dominant role in catalytic degradation, upgrading, and remanufacturing of environmental pollutants. Previous studies have shown that SMSI is crucial in supported catalysts' activity and stability. However, for redox reactions catalyzed in environmental catalysis, the enhancement mechanism of SMSI-induced oxygen vacancy and electron transfer needs to be clarified. Additionally, the precise control of SMSI interface sites remains to be fully understood. Here we provide a systematic review of SMSI's catalytic mechanisms and control strategies in purifying gaseous pollutants, treating organic wastewater, and valorizing biomass solid waste. We explore the adsorption and activation mechanisms of SMSI in redox reactions by examining interfacial electron transfer, interfacial oxygen vacancy, and interfacial acidic sites. Furthermore, we develop a precise regulation strategy of SMSI from systematical perspectives of interface effect, crystal facet effect, size effect, guest ion doping, and modification effect. Importantly, we point out the drawbacks and breakthrough directions for SMSI regulation in environmental catalysis, including partial encapsulation strategy, size optimization strategy, interface oxygen vacancy strategy, and multi-component strategy. This review article provides the potential applications of SMSI and offers guidance for its controlled regulation in environmental catalysis.

Dry Reforming of Methane on Ni/LaZrO2 Catalyst under External Electric Fields: A Combined First-Principles and Microkinetic Modeling Study.

Dry reforming of methane (DRM) reaction has great potential in reducing the greenhouse effect and solving energy problems. Herein, the DRM reaction mechanism and activity on Ni16/LaZrO2 catalyst under electric fields were comprehensively investigated by combining density functional theory calculations with microkinetic modeling. The results showed that La doping increases the interaction between Ni and ZrO2 by Ni cluster transfer of more electrons. The adsorption strength of species followed the order Ni16/ZrO2 > Ni16/LaZrO2, which is consistent with the results for the d-band center but opposite to the metal-support interaction. The best DRM reaction path on Ni16/LaZrO2 was the CH2-O pathway, which is different from the CH-O pathway on Ni(111) and Ni16/ZrO2. Both positive and negative electric fields of strong and weak metal-support interactions reduced the energy barrier of DRM reaction. Importantly, our results showed that the more dispersed and smaller Ni12/LaZrO2 model by considering the dispersing effect induced by La doping, which displayed very different results from that of Ni16/LaZrO2: reduced the energy barrier for methane decomposition, thereby promoting DRM reaction activity. Microkinetic results showed that the carbon deposition behavior of DRM becomes weaker on Ni16/LaZrO2 due to the suppression of methane decomposition in the presence of La doping compared to Ni16/ZrO2, but the opposite result is obtained on Ni12/LaZrO2. The order of DRM reactivity was Ni16/LaZrO2 < Ni16/ZrO2 < Ni12/LaZrO2, which is consistent with the experiment observations. The conversion of methane and CO2 was higher in positive electric fields than in negative electric fields at low temperatures, but the results were opposite at high temperature. Negative electric fields can improve the carbon deposition resistance of Ni-based catalysts compared to positive electric fields. The degree of rate control analysis showed that CHx* oxidation also plays an important role in the DRM reaction. We envision that this study could provide a deeper understanding for guiding the widespread application of electric field catalysis.

Enhancing Pd Catalytic Activity by Amine Group Modification for Efficient Direct Synthesis of H2O2.

A great deal of research has been carried out on the design of Pd-based catalysts in the direct synthesis of H2O2, mainly for the purpose of improving the H2O2 selectivity by weakening the activation energy on the Pd active site and thus inhibiting the dissociation of the O-O bonds in O2*, OOH*, and HOOH*. However, this often results in insufficient activation energy for the reaction between H2 and O2 on Pd, leading to difficulties in improving both the selectivity and productivity of H2O2 simultaneously. Based on this, this study reports an efficient catalyst composed of amine-functionalized SBA-15-supported Pd. The strong metal-support interaction not only makes the PdNPs highly dispersed with more Pd active sites but also improves the stability of the catalyst. The amine group modification increases the proportion of Pd0, further enhancing Pd activity and promoting the adsorption and conversion of H2 and O2 on Pd, thereby significantly increasing H2O2 productivity. Additionally, the density-functional theory simulation results showed that due to the hydrogen-bonding force between the amine group and H2O2, this particular anchoring effect would make the hydrogenation and decomposition of H2O2 effectively suppressed. Ultimately, both the selectivity and productivity of H2O2 are improved simultaneously.

X-ray standing wave characterization of the strong metal-support interaction in Co/TiOx model catalysts.

The strong metal-support interaction (SMSI) is a phenomenon observed in supported metal catalyst systems in which reducible metal oxide supports can form overlayers over the surface of active metal nanoparticles (NPs) under a hydrogen (H2) environment at elevated temperatures. SMSI has been shown to affect catalyst performance in many reactions by changing the type and number of active sites on the catalyst surface. Laboratory methods for the analysis of SMSI at the nanoparticle-ensemble level are lacking and mostly based on indirect evidence, such as gas chemisorption. Here, we demonstrate the possibility to detect and characterize SMSIs in Co/TiOx model catalysts using the laboratory X-ray standing wave (XSW) technique for a large ensemble of NPs at the bulk scale. We designed a thermally stable MoNx/SiNx periodic multilayer to retain XSW generation after reduction with H2 gas at 600°C. The model catalyst system was synthesized here by deposition of a thin TiOx layer on top of the periodic multilayer, followed by Co NP deposition via spare ablation. A partial encapsulation of Co NPs by TiOx was identified by analyzing the change in Ti atomic distribution. This novel methodological approach can be extended to observe surface restructuring of model catalysts in situ at high temperature (up to 1000°C) and pressure (≤3 mbar), and can also be relevant for fundamental studies in the thermal stability of membranes, as well as metallurgy.

Ultrasmall RuM (Mo, W, Cr) Decorated on Nitrogen-doped Carbon Nanosheet with Strong Metal-support Interactions for Electrocatalytic Hydrogen Generation in Wide pH Range.

Developing efficient electrocatalysts for hydrogen evolution reaction (HER) in full pH range can promote the practical applications of hydrogen energy. In this work, nitrogen doped carbon nanosheets supported RuM (Mo, W, Cr) (RuM/NCN) are prepared through an ultrafast microwave approach. The carbon nanosheet structure coupled with the ultrasmall RuM nanoparticles can expose rich active sites to optimize the catalytic activity. Moreover, the strong metal-support interactions also favor to accelerate the reactions kinetics and improve stability. Thus, the developed RuMo/NCN (RuW/NCN) show excellent HER catalytic activities with overpotentials of 72 (75) mV, 82 (82) mV and 124 (119) mV to reach current density of 10 mA cm -2 in 1 M KOH, 0.5 M H2SO4 and alkaline seawater, respectively, and also achieve excellent performance in 1 M PBS. This work provides a valid and novel avenue to design efficient electrocatalysts in renewable energy-related fields.

Carbon Encapsulation of Supported Metallic Iridium Nanoparticles: An in Situ Transmission Electron Microscopy Study and Implications for Hydrogen Evolution Reaction.

Carbon-supported metal nanoparticles (NPs) comprise an important class of heterogeneous catalysts. The interaction between the metal and carbon support influences the overall material properties, viz., the catalytic performance. Herein we use in situ and ex situ transmission electron microscopy (TEM) in combination with in situ X-ray spectroscopy (XPS) to investigate the encapsulation of metallic iridium NPs by carbon in an Ir/C catalyst. Real-time atomic-scale imaging visualizes particle reshaping and increased graphitization of the carbon support upon heating of Ir/C in vacuum. According to in situ TEM results, carbon overcoating grows over Ir NPs during the heating process, starting from ca. 550 °C. With the carbon overlayers formed, no sintering and migration of Ir NPs is observed at 800 °C, yet the initial Ir NPs sinter at or below 550 °C, i.e., at a temperature associated with an incomplete particle encapsulation. The carbon overlayer corrugates when the temperature is decreased from 800 to 200 °C and this process is associated with the particle surface reconstruction and is reversible, such that the corrugated carbon overlayer can be smoothed out by increasing the temperature back to 800 °C. The catalytic performance (activity and stability) of the encapsulated Ir NPs in the hydrogen evolution reaction (HER) is higher than that of the initial (nonencapsulated) state of Ir/C. Overall, this work highlights microscopic details of the currently understudied phenomenon of the carbon encapsulation of supported noble metal NPs and demonstrates additionally that the encapsulation by carbon is an effective measure for tuning the catalytic performance.

Investigation on the surface charge separation in Pt-supported morphology-related-TiO2 and its effect on water splitting.

Lowering Pt loading in the catalyst while maintaining its superior catalytic efficiency during hydrogen evolution reaction (HER) is essential for the large-scale application of water splitting. The utilization of strong metal-support interaction (SMSI) through morphology engineering has emerged as an effective strategy in fabricating Pt-supported catalysts. However, a simple and explicit routine to realize the rational design of morphology-related SMSI remains challenging. Here we report a protocol for the photochemical deposition of Pt, which benefits from the intrinsic difference in absorption capability of TiO2 to establish proper Pt+ species and charge separation domains on the surface. With a comprehensive investigation of the surface environment through experiments and Density functional theory (DFT) calculations, charge transfer from Pt to Ti, the separation of electron-hole pairs, and the enhanced electron transfer in the TiO2 matrix were confirmed. It is reported that H2O molecules can be spontaneously dissociated by the surface Ti and O, generating OH stabilized by adjacent Ti and Pt. Such adsorbed OH group induces changes in the electron density of Pt, consequently favours the H adsorption and enhances the HER. Benefiting from the preferable electronic state, the annealed Pt@TiO2-pH9 (PTO-pH9@A) exhibits an overpotential of 30 mV to reach 10 mA cm-2 geo and a mass activity of 3954 A g-1Pt, which is 17-fold higher than the commercial Pt/C. Our work provides a new strategy for the high-efficient catalyst design by the surface state- regulated SMSI.

Direct Evidence of Dynamic Metal Support Interactions in Co/TiO2 Catalysts by Near-Ambient Pressure X-ray Photoelectron Spectroscopy.

The interaction between metal particles and the oxide support, the so-called metal-support interaction, plays a critical role in the performance of heterogenous catalysts. Probing the dynamic evolution of these interactions under reactive gas atmospheres is crucial to comprehending the structure-performance relationship and eventually designing new catalysts with enhanced properties. Cobalt supported on TiO2 (Co/TiO2) is an industrially relevant catalyst applied in Fischer-Tropsch synthesis. Although it is widely acknowledged that Co/TiO2 is restructured during the reaction process, little is known about the impact of the specific gas phase environment at the material's surface. The combination of soft and hard X-ray photoemission spectroscopies are used to investigate in situ Co particles supported on pure and NaBH4-modified TiO2 under H2, O2, and CO2:H2 gas atmospheres. The combination of soft and hard X-ray photoemission methods, which allows for simultaneous probing of the chemical composition of surface and subsurface layers, is one of the study's unique features. It is shown that under H2, cobalt particles are encapsulated below a stoichiometric TiO2 layer. This arrangement is preserved under CO2 hydrogenation conditions (i.e., CO2:H2), but changes rapidly upon exposure to O2. The pretreatment of the TiO2 support with NaBH4 affects the surface mobility and prevents TiO2 spillover onto Co particles.

Coating Porous TiO2 Films on Carbon Nanotubes to Enhance the Durability of Ultrafine PtCo/CNT Nanocatalysts for the Oxygen Reduction Reaction.

The development of excellent activity and durability catalysts for the oxygen reduction reaction (ORR) is essential for the commercialization of proton exchange membrane fuel cells (PEMFCs). Reducing the size of catalyst particles can provide more reaction sites to mitigate the performance degradation caused by reduced platinum loading. However, at the same time, it makes the particles more prone to agglomeration and exfoliation, leading to a rapid reduction in catalyst activity. Here, we present the design of a composite support (TiO2/CNT) with a porous TiO2 film that immobilizes PtCo nanoparticles (NPs) loaded on the support while protecting the carbon nanotubes inside. The particle size of PtCo NPs was only 1.99 nm (determined by transmission electron microscopy), but the nanocatalyst (PtCo/TiO2/CNT) maintained high catalytic performance and stability on account of the strong metal support interaction (SMSI). PtCo/TiO2/CNT exhibited a high mass activity (MA, 0.476 A mgPt-1) and was found to have MA retention rates of 91.7 and 88.8% in durability tests performed at 0.6-1.0 V and 1.0-1.5 V, respectively.