Limited exposure to preserve stability and achieve complete excision of limited dorsal myeloschisis - the "Skip-Hop Laminectomy" technique: a technical note.

OBJECTIVE: The fibroneural stalk of an LDM has variable thickness, complexity, and length, which can span 5 to 6 vertebral segments from its skin attachment to its "merge point" with the dorsal spinal cord. Therefore, complete resection may require extensive multi-level laminotomies. In this technical note, a modification of the procedure is presented that avoids long segment laminectomies while ensuring complete excision of long LDM stalks. RESULTS: An illustrative case of resection of LDM is presented using skip laminectomies. The technique ensures complete removal of the stalk, thus reducing the risk of future intradural dermoid development, while at the same time minimizes the risk for delayed kyphotic deformity. CONCLUSIONS: A technique of "skip-hop" proximal and distal short segment laminectomies in cases of LDM optimizes the objectives of complete stalk resection with preservation of spinal integrity.

Degenerative lumbar spondylolisthesis: review of current classifications and proposal of a novel classification system.

PURPOSE: To review existing classification systems for degenerative spondylolisthesis (DS), propose a novel classification designed to better address clinically relevant radiographic and clinical features of disease, and determine the inter- and intraobserver reliability of this new system for classifying DS. METHODS: The proposed classification system includes four components: 1) segmental dynamic instability, 2) location of spinal stenosis, 3) sagittal alignment, and 4) primary clinical presentation. To establish the reliability of this system, 12 observers graded 10 premarked test cases twice each. Kappa values were calculated to assess the inter- and intraobserver reliability for each of the four components separately. RESULTS: Interobserver reliability for dynamic instability, location of stenosis, sagittal alignment, and clinical presentation was 0.94, 0.80, 0.87, and 1.00, respectively. Intraobserver reliability for dynamic instability, location of stenosis, sagittal alignment, and clinical presentation were 0.91, 0.88, 0.87, and 0.97, respectively. CONCLUSION: The UCSF DS classification system provides a novel framework for assessing DS based on radiographic and clinical parameters with established implications for surgical treatment. The almost perfect interobserver and intraobserver reliability observed for all components of this system demonstrates that it is simple and easy to use. In clinical practice, this classification may allow subclassification of similar patients into groups that may benefit from distinct treatment strategies, leading to the development of algorithms to help guide selection of an optimal surgical approach. Future work will focus on the clinical validation of this system, with the goal of providing for more evidence-based, standardized approaches to treatment and improved outcomes for patients with DS.

Fat infiltration of the posterior paraspinal muscles is inversely associated with the fat infiltration of the psoas muscle: a potential compensatory mechanism in the lumbar spine.

BACKGROUND: The function of the paraspinal muscles and especially the psoas muscle in maintaining an upright posture is not fully understood. While usually considered solely as a hip flexor, the psoas muscle and its complex anatomy suggest that the muscle has other functions involved in stabilizing the lumbar spine. The aim of this study is to determine how the psoas muscle and the posterior paraspinal muscles (PPM; erector spinae and multifidus) interact with each other. METHODS: A retrospective review including patients undergoing posterior lumbar fusion surgery between 2014 and 2021 at a tertiary care center was conducted. Patients with a preoperative lumbar magnetic resonance imaging (MRI) scan performed within 12 months prior to surgery were considered eligible. Exclusion criteria included previous spinal surgery at any level, lumbar scoliosis with a Cobb Angle > 20° and patients with incompatible MRIs. MRI-based quantitative assessments of the cross-sectional area (CSA), the functional cross-sectional area (fCSA) and the fat area (FAT) at L4 was conducted. The degree of fat infiltration (FI) was further calculated. FI thresholds for FIPPM were defined according to literature and patients were divided into two groups (< or ≥ 50% FIPPM). RESULTS: One hundred ninetypatients (57.9% female) with a median age of 64.7 years and median BMI of 28.3 kg/m2 met the inclusion criteria and were analyzed. Patients with a FIPPM ≥ 50% had a significantly lower FI in the psoas muscle in both sexes. Furthermore, a significant inverse correlation was evident between FIPPM and FIPsoas for both sexes. A significant positive correlation between FATPPM and fCSAPsoas was also found for both sexes. No significant differences were found for both sexes in both FIPPM groups. CONCLUSION: As the FIPPM increases, the FIPsoas decreases. Increased FI is a surrogate marker for a decrease in muscular strength. Since the psoas and the PPM both segmentally stabilize the lumbar spine, these results may be indicative of a potential compensatory mechanism. Due to the weakened PPM, the psoas may compensate for a loss in strength in order to stabilize the spine segmentally.

A novel use of cone beam CT: flexion and extension weight-bearing imaging to assess spinal stability.

PURPOSE: To assess spinal stability in different physiological positions whilst weight-bearing. METHODS: A cone beam CT scanner (CBCT) was used to identify any abnormal motion in the spine in different physiological positions whilst weight-bearing. The lumbar spine was assessed in 6 different patients with a comfortable neutral standing position and standing flexion and extension images in selected patients. Seated, weight-bearing flexion and extension images of the cervical spine were obtained in a further patient. Clinical indications included stability assessment post-trauma, post-surgical fusion and back pain. The projection images were reconstructed using bone and soft tissue algorithms to give isotropic CT images which could be viewed as per conventional multi-detector CT images. The flexion and extension CBCT data were fused to give a representation of any spinal movement between the extremes of motion. RESULTS: The flexion and extension weight-bearing images gave anatomical detail of the spine. Detail of the surgical constructs was possible. Dynamic structural information about spinal alignment, facet joints, exit foramina and paraspinal musculature was possible. The effective dose from the neutral position was equal to that of supine, multi-detector CT. CONCLUSION: CBCT can be used to image the lumbar and cervical spine in physiological weight-bearing positions and at different extremes of spinal motion. This novel application of an existing technology can be used to aid surgical decision making to assess spinal stability and to investigate occult back and leg pain. Its use should be limited to specific clinical indications, given the relatively high radiation dose.

The effects of prolonged sitting, standing, and an alternating sit-stand pattern on trunk mechanical stiffness, trunk muscle activation and low back discomfort.

Sit-stand desks continue to be a popular intervention for office work. While previous studies have reported changes in subjective measures, there is limited understanding of how sit-stand work differs from prolonged sitting or standing work, from a biomechanical standpoint. The objective of this study was to investigate the effects of prolonged sitting, prolonged standing, and a sit-stand paradigm on changes in trunk stiffness, low back discomfort, and trunk muscle activation. Twelve healthy participants performed 2 h of computer-based tasks in each protocol, on three different days. The sit-stand protocol was associated with a significant increase in trunk stiffness and a decrease in muscle activation of lumbar multifidus and longissimus thoracis pars thoracis, compared to both prolonged sitting and standing. Both sitting and standing were associated with increased low back discomfort. These findings may be worth exploring in more detail, for why alternating sit-stand patterns may help alleviate low back pain. Practitioner summary: We explored changes in objective and subjective measures related to low back discomfort following prolonged sitting, standing, and alternating sit-stand patterns. Alternating sit-stand pattern was associated with increased trunk stiffness and decreased back muscle activity. Hence, sit-stand desks may have benefits in terms of preventing/mitigating low back pain. Abbreviations: DOF: degree of freedom; EMG: electromyogram; ILL: iliocostalis lumborum pars lumborum; LTL: longissimus thoracis pars lumborum; LTT: longissimus thoracis pars thoracis; LBP: low back pain; LM: lumbar multifidus; MVEs: maximum isometric voluntary exertions; RANOVA: repeated-measure analysis of variance; RMS: root mean square.

The biomechanical effect of single-level laminectomy and posterior instrumentation on spinal stability in degenerative lumbar scoliosis: a human cadaveric study.

OBJECTIVEDegenerative lumbar scoliosis, or de novo degenerative lumbar scoliosis, can result in spinal canal stenosis, which is often accompanied by disabling symptoms. When surgically treated, a single-level laminectomy is performed and short-segment posterior instrumentation is placed to restore stability. However, the effects of laminectomy on spinal stability and the necessity of placing posterior instrumentation are unknown. Therefore, the aim of this study was to assess the stability of lumbar spines with degenerative scoliosis, characterized by the range of motion (ROM) and neutral zone (NZ) stiffness, after laminectomy and placement of posterior instrumentation.METHODSTen lumbar cadaveric spines (T12-L5) with a Cobb angle ≥ 10° and an apex on L3 were included. Three loading cycles were applied per direction, from -4 Nm to 4 Nm in flexion/extension (FE), lateral bending (LB), and axial rotation (AR). Biomechanical evaluation was performed on the native spines and after subsequent L3 laminectomy and the placement of posterior L2-4 titanium rods and pedicle screws. Nonparametric and parametric tests were used to analyze the effects of laminectomy and posterior instrumentation on NZ stiffness and ROM, respectively, both on an individual segment's motion and on the entire spine section. Spearman's rank correlation coefficient was used to study the correlation between disc degeneration and spinal stability.RESULTSThe laminectomy increased ROM by 9.5% in FE (p = 0.04) and 4.6% in LB (p = 0.01). For NZ stiffness, the laminectomy produced no significant effects. Posterior instrumentation resulted in a decrease in ROM in all loading directions (-22.2%, -24.4%, and -17.6% for FE, LB, and AR, respectively; all p < 0.05) and an increase in NZ stiffness (+44.7%, +51.7%, and +35.2% for FE, LB, and AR, respectively; all p < 0.05). The same changes were seen in the individual segments around the apex, while the adjacent, untreated segments were mostly unaffected. Intervertebral disc degeneration was found to be positively correlated to decreased ROM and increased NZ stiffness.CONCLUSIONSLaminectomy in lumbar spines with degenerative scoliosis did not result in severe spinal instability, whereas posterior instrumentation resulted in a rigid construct. Also, prior to surgery, the spines already had lower ROM and higher NZ stiffness in comparison to values shown in earlier studies on nonscoliotic spines of the same age. Hence, the authors question the clinical need for posterior instrumentation to avoid instability.

Motor adaptations to trunk perturbation: effects of experimental back pain and spinal tissue creep.

In complex anatomical systems, such as the trunk, motor control theories suggest that many motor solutions can be implemented to achieve a similar goal. Although reflex mechanisms act as a stabilizer of the spine, how the central nervous system uses trunk redundancy to adapt neuromuscular responses under the influence of external perturbations, such as experimental pain or spinal tissue creep, is still unclear. The aim of this study was to identify and characterize trunk neuromuscular adaptations in response to unexpected trunk perturbations under the influence of spinal tissue creep and experimental back pain. Healthy participants experienced a repetition of sudden external trunk perturbations in two protocols: 1) 15 perturbations before and after a spinal tissue creep protocol and 2) 15 perturbations with and without experimental back pain. Trunk neuromuscular adaptations were measured by using high-density electromyography to record erector spinae muscle activity recruitment patterns and a motion analysis system. Muscle activity reflex attenuation was found across unexpected trunk perturbation trials under the influence of creep and pain. A similar area of muscle activity distribution was observed with or without back pain as well as before and after creep. No change of trunk kinematics was observed. We conclude that although under normal circumstances muscle activity adaptation occurs throughout the same perturbations, a reset of the adaptation process is present when experiencing a new perturbation such as experimental pain or creep. However, participants are still able to attenuate reflex responses under these conditions by using variable recruitment patterns of back muscles. NEW & NOTEWORTHY The present study characterizes, for the first time, trunk motor adaptations with high-density surface electromyography when the spinal system is challenged by a series of unexpected perturbations. We propose that the central nervous system is able to adapt neuromuscular responses by using a variable recruitment pattern of back muscles to maximize the motor performance, even under the influence of pain or when the passive structures of the spine are altered.

Trunk proprioception adaptations to creep deformation.

PURPOSE: This study aimed at identifying the short-term effect of creep deformation on the trunk repositioning sense. METHODS: Twenty healthy participants performed two different trunk-repositioning tasks (20° and 30° trunk extension) before and after a prolonged static full trunk flexion of 20 min in order to induce spinal tissue creep. Trunk repositioning error variables, trunk movement time and erector spinae muscle activity were computed and compared between the pre- and post-creep conditions. RESULTS: During the pre-creep condition, significant increases in trunk repositioning errors, as well as trunk movement time, were observed in 30° trunk extension in comparison to 20°. During the post-creep condition, trunk repositioning errors variables were significantly increased only when performing a 20° trunk extension. Erector spinae muscle activity increased in the post-creep condition, while it remained unchanged between trunk repositioning tasks. CONCLUSIONS: Trunk repositioning sense seems to be altered in the presence of creep deformation, especially in a small range of motion. Reduction of proprioception acuity may increase the risk of spinal instability, which is closely related to the risk of low back pain or injury.

Effects of the weight configuration of hand load on trunk musculature during static weight holding.

The performance of manual material handling tasks is one major cause of lower back injuries. In the current study, we investigated the influence of the weight configuration of hand loads on trunk muscle activities and the associated spinal stability. Thirteen volunteers each performed static weight-holding tasks using two different 9 kg weight bars (with medial and lateral weight configurations) at two levels of height (low and high) and one fixed horizontal distance (which resulted in constant spinal joint moment across conditions). Results of the current study demonstrated that holding the laterally distributed load significantly reduced activation levels of lumbar and abdominal muscles by 9-13% as compared with holding the medially distributed load. We believe such an effect is due to an elevated rotational moment of inertia when the weight of the load is laterally distributed. These findings suggest that during the design and assessment of manual material handling tasks, such as lifting and carrying, the weight configuration of the hand load should be considered. Practitioner summary: Elevated trunk muscle activities were found when holding a medially distributed load vs. a laterally distributed load (with an equivalent external moment to the spine), indicating a reduced spinal stability due to the reduced rotational moment of inertia. The configuration of the hand load should be considered when evaluating manual material handling tasks.

Movement amplitude on the Functional Re-adaptive Exercise Device: deep spinal muscle activity and movement control.

PURPOSE: Lumbar multifidus (LM) and transversus abdominis (TrA) show altered motor control, and LM is atrophied, in people with low-back pain (LBP). The Functional Re-adaptive Exercise Device (FRED) involves cyclical lower-limb movement against minimal resistance in an upright posture. It has been shown to recruit LM and TrA automatically, and may have potential as an intervention for non-specific LBP. However, no studies have yet investigated the effects of changes in FRED movement amplitude on the activity of these muscles. This study aimed to assess the effects of different FRED movement amplitudes on LM and TrA muscle thickness and movement variability, to inform an evidence-based exercise prescription. METHODS: Lumbar multifidus and TrA thickness of eight healthy male volunteers were examined using ultrasound imaging during FRED exercise, normalised to rest at four different movement amplitudes. Movement variability was also measured. Magnitude-based inferences were used to compare each amplitude. RESULTS: Exercise at all amplitudes recruited LM and TrA more than rest, with thickness increases of approximately 5 and 1 mm, respectively. Larger amplitudes also caused increased TrA thickness, LM and TrA muscle thickness variability and movement variability. The data suggests that all amplitudes are useful for recruiting LM and TrA. CONCLUSIONS: A progressive training protocol should start in the smallest amplitude, increasing the setting once participants can maintain a consistent movement speed, to continue to challenge the motor control system.