Distinct immunological signatures discriminate severe COVID-19 from non-SARS-CoV-2-driven critical pneumonia.

Immune profiling of COVID-19 patients has identified numerous alterations in both innate and adaptive immunity. However, whether those changes are specific to SARS-CoV-2 or driven by a general inflammatory response shared across severely ill pneumonia patients remains unknown. Here, we compared the immune profile of severe COVID-19 with non-SARS-CoV-2 pneumonia ICU patients using longitudinal, high-dimensional single-cell spectral cytometry and algorithm-guided analysis. COVID-19 and non-SARS-CoV-2 pneumonia both showed increased emergency myelopoiesis and displayed features of adaptive immune paralysis. However, pathological immune signatures suggestive of T cell exhaustion were exclusive to COVID-19. The integration of single-cell profiling with a predicted binding capacity of SARS-CoV-2 peptides to the patients' HLA profile further linked the COVID-19 immunopathology to impaired virus recognition. Toward clinical translation, circulating NKT cell frequency was identified as a predictive biomarker for patient outcome. Our comparative immune map serves to delineate treatment strategies to interfere with the immunopathologic cascade exclusive to severe COVID-19.

eIF3 Associates with 80S Ribosomes to Promote Translation Elongation, Mitochondrial Homeostasis, and Muscle Health.

eIF3, a multi-subunit complex with numerous functions in canonical translation initiation, is known to interact with 40S and 60S ribosomal proteins and translation elongation factors, but a direct involvement in translation elongation has never been demonstrated. We found that eIF3 deficiency reduced early ribosomal elongation speed between codons 25 and 75 on a set of ∼2,700 mRNAs encoding proteins associated with mitochondrial and membrane functions, resulting in defective synthesis of their encoded proteins. To promote elongation, eIF3 interacts with 80S ribosomes translating the first ∼60 codons and serves to recruit protein quality-control factors, functions required for normal mitochondrial physiology. Accordingly, eIF3e+/- mice accumulate defective mitochondria in skeletal muscle and show a progressive decline in muscle strength. Hence, eIF3 interacts with 80S ribosomes to enhance, at the level of early elongation, the synthesis of proteins with membrane-associated functions, an activity that is critical for mitochondrial physiology and muscle health.

Improving strength and toughness of graphene film through metal ion bridging.

The fangs, jaws, and mandibles of marine invertebrates such as Chiton and Glycera show excellent mechanical properties, which are mostly contributed to the interactions between metal (Fe, Cu, Zn, etc.) and oxygen-containing functional groups in proteins. Inspired by these load-bearing skeletal biomaterials, we improved tensile strength and toughness of graphene films through bridging graphene oxide (GO) nanosheets by metal ions. By optimizing the metal coordination form and density of cross-linking network. We revealed the relationship between mechanical properties and the unique spatial geometry of the GO nanosheets bridged by different valence metal ions. The results demonstrated that the divalent metal ions form tetrahedral geometry with carboxylate groups on the edges of the GO nanosheets, and the bond energy is relatively low, which is helpful for improving the toughness of resultant graphene films. While the trivalent metal ions are easily to form octahedral geometry with the GO nanosheets with higher bond energy, which is better for enhancing the tensile strength of graphene films. After reduction, the reduced GO (rGO) film bridged by divalent metal ions shows 43% improvement in toughness, while the rGO film bridged by trivalent metal ions shows 64% improvement in tensile strength. Our work reveals the mechanism of metal coordination bond energy and spatial geometry to improve the mechanical properties of graphene films, which lays a theoretical foundation for improving the tensile strength and toughness of resultant graphene films, and provides an avenue for fabricating high-performance graphene films and other two-dimensional nanocomposites.

Laser-driven noncontact bubble transfer printing via a hydrogel composite stamp.

Transfer printing that enables heterogeneous integration of materials into spatially organized, functional arrangements is essential for developing unconventional electronic systems. Here, we report a laser-driven noncontact bubble transfer printing via a hydrogel composite stamp, which features a circular reservoir filled with hydrogel inside a stamp body and encapsulated by a laser absorption layer and an adhesion layer. This composite structure of stamp provides a reversible thermal controlled adhesion in a rapid manner through the liquid-gas phase transition of water in the hydrogel. The ultrasoft nature of hydrogel minimizes the influence of preload on the pick-up performance, which offers a strong interfacial adhesion under a small preload for a reliable damage-free pick-up. The strong light-matter interaction at the interface induces a liquid-gas phase transition to form a bulge on the stamp surface, which eliminates the interfacial adhesion for a successful noncontact printing. Demonstrations of noncontact transfer printing of microscale Si platelets onto various challenging nonadhesive surfaces (e.g., glass, key, wrench, steel sphere, dry petal, droplet) in two-dimensional or three-dimensional layouts illustrate the unusual capabilities for deterministic assembly to develop unconventional electronic systems such as flexible inorganic electronics, curved electronics, and micro-LED display.

Dislocation flow turbulence simultaneously enhances strength and ductility.

Multi-principal element alloys (MPEAs) exhibit outstanding strength attributed to the complex dislocation dynamics as compared to conventional alloys. Here, we develop an atomic-lattice-distortion-dependent discrete dislocation dynamics framework consisted of random field theory and phenomenological dislocation model to investigate the fundamental deformation mechanism underlying massive dislocation motions in body-centered cubic MPEA. Amazingly, the turbulence of dislocation speed is identified in light of strong heterogeneous lattice strain field caused by short-range ordering. Importantly, the vortex from dislocation flow turbulence not only acts as an effective source to initiate dislocation multiplication but also induces the strong local pinning trap to block dislocation movement, thus breaking the strength-ductility trade-off.

ADH-Enhancer: an attention-based deep hybrid framework for enhancer identification and strength prediction.

Enhancers play an important role in the process of gene expression regulation. In DNA sequence abundance or absence of enhancers and irregularities in the strength of enhancers affects gene expression process that leads to the initiation and propagation of diverse types of genetic diseases such as hemophilia, bladder cancer, diabetes and congenital disorders. Enhancer identification and strength prediction through experimental approaches is expensive, time-consuming and error-prone. To accelerate and expedite the research related to enhancers identification and strength prediction, around 19 computational frameworks have been proposed. These frameworks used machine and deep learning methods that take raw DNA sequences and predict enhancer's presence and strength. However, these frameworks still lack in performance and are not useful in real time analysis. This paper presents a novel deep learning framework that uses language modeling strategies for transforming DNA sequences into statistical feature space. It applies transfer learning by training a language model in an unsupervised fashion by predicting a group of nucleotides also known as k-mers based on the context of existing k-mers in a sequence. At the classification stage, it presents a novel classifier that reaps the benefits of two different architectures: convolutional neural network and attention mechanism. The proposed framework is evaluated over the enhancer identification benchmark dataset where it outperforms the existing best-performing framework by 5%, and 9% in terms of accuracy and MCC. Similarly, when evaluated over the enhancer strength prediction benchmark dataset, it outperforms the existing best-performing framework by 4%, and 7% in terms of accuracy and MCC.

Ultrahigh toughness zirconia ceramics.

The attainment of both high strength and toughness is the ultimate goal for most structural materials. Although ceramic material has been considered for use as a structural material due to its high strength and good chemical stability, it suffers from the limitation of low toughness. For instance, although Y2O3-stabilized tetragonal ZrO2 polycrystals (Y-TZPs) exhibit remarkable toughness among ceramics due to their phase transformation toughening mechanism, this toughness is still much weaker than that of metals. Here, we report Y-TZP-based ceramic materials with toughnesses exceeding 20 MPa m1/2, which is comparable to those of metals, while maintaining strengths over 1,200 MPa. The superior mechanical properties are realized by reducing the phase stability of tetragonal zirconia by tailoring the microstructure and chemistry of the Y-TZP. The proposed ceramic materials can further advance the design and application of ceramic-based structural materials.

Palladium metallene confined on MXene with increased hydroxyl binding strength for highly efficient ethanol electrooxidation.

Rational design and synthesis of high-performance electrocatalysts for ethanol oxidation reaction (EOR) is crucial to large-scale commercialization of direct ethanol fuel cells, but it is still an incredible challenge. Herein, a unique Pd metallene/Ti3C2Tx MXene (Pdene/Ti3C2Tx)-supported electrocatalyst is constructed via an in-situ growth approach for high-efficiency EOR. The resulting Pdene/Ti3C2Tx catalyst achieves an ultrahigh mass activity of 7.47 A mgPd-1 under alkaline condition, as well as high tolerance to CO poisoning. In situ attenuated total reflection-infrared spectroscopy studies combined with density functional theory calculations reveal that the excellent EOR activity of Pdene/Ti3C2Tx catalyst is attributed to the unique and stable interfaces which reduce the reaction energy barrier of *CH3CO intermediate oxidation and facilitate oxidative removal of CO poisonous species by increasing the Pd-OH binding strength.

The strength, position, and width changes of the intertropical convergence zone since the Last Glacial Maximum.

The intertropical convergence zone (ITCZ) plays a key role in regulating tropical hydroclimate and global water cycle through changes in its convection strength, latitudinal position, and width. The long-term variability of the ITCZ, along with the corresponding driving mechanisms, however, remains obscure, mainly because it is difficult to separate different ITCZ variables in paleoclimate proxy records. Here, we report a speleothem oxygen isotope (δ18O) record from southwestern Sulawesi, Indonesia, and compile it with other speleothem records from the Maritime Continent. Using the spatial gradient of speleothem δ18O along a transect across the ITCZ, we constrain ITCZ variabilities over the Maritime Continent during the past 30,000 y. We find that ITCZ convection strength overall intensified from the last glacial period to the Holocene, following changes in climate boundary conditions. The mean position of the regional ITCZ has moved latitudinally no more than 3° in the past 30,000 y, consistent with the deduction from the atmospheric energy framework. However, different from modern observations and model simulations for future warming, the ITCZ appeared narrower during both the late Holocene and most part of the last glacial period, and its expansion occurred during Heinrich stadials and the early-to-mid Holocene. We also find that during the last glacial and deglacial period, prominent millennial-scale ITCZ changes were closely tied to the variability of the Atlantic meridional overturning circulation (AMOC), whereas during the Holocene, they were predominantly modulated by the long-term variability of the Walker circulation.

Polymerization mechanism of the Candida albicans virulence factor candidalysin.

Candida albicans is a commensal fungus that can cause epithelial infections and life-threatening invasive candidiasis. The fungus secretes candidalysin (CL), a peptide that causes cell damage and immune activation by permeation of epithelial membranes. The mechanism of CL action involves strong peptide assembly into polymers in solution. The free ends of linear CL polymers can join, forming loops that become pores upon binding to membranes. CL polymers constitute a therapeutic target for candidiasis, but little is known about CL self-assembly in solution. Here, we examine the assembly mechanism of CL in the absence of membranes using complementary biophysical tools, including a new fluorescence polymerization assay, mass photometry, and atomic force microscopy. We observed that CL assembly is slow, as tracked with the fluorescent marker C-laurdan. Single-molecule methods showed that CL polymerization involves a convolution of four processes. Self-assembly begins with the formation of a basic subunit, thought to be a CL octamer that is the polymer seed. Polymerization proceeds via the addition of octamers, and as polymers grow they can curve and form loops. Alternatively, secondary polymerization can occur and cause branching. Interplay between the different rates determines the distribution of CL particle types, indicating a kinetic control mechanism. This work elucidates key physical attributes underlying CL self-assembly which may eventually evoke pharmaceutical development.

Mechano-Redox Control of Mac-1 De-Adhesion by PDI Promotes Directional Movement Under Flow.

BACKGROUND: Neutrophil migration is critical to the initiation and resolution of inflammation. Macrophage-1 antigen (Mac-1; CD11b/CD18, αMß2) is a leukocyte integrin essential for firm adhesion to endothelial ICAM-1 (intercellular adhesion molecule 1) and migration of neutrophils in the shear forces of the circulation. PDI (protein disulfide isomerase) has been reported to influence neutrophil adhesion and migration. We aimed to elucidate the molecular mechanism of PDI control of Mac-1 affinity for ICAM-1 during neutrophil migration under fluid shear. METHODS: Neutrophils isolated from whole blood were perfused over microfluidic chips coated with ICAM-1. Colocalization of Mac-1 and PDI on neutrophils was visualized by fluorescently labeled antibodies and confocal microscopy. The redox state of Mac-1 disulfide bonds was mapped by differential cysteine alkylation and mass spectrometry. Wild-type or disulfide mutant Mac-1 was expressed recombinantly in Baby Hamster Kidney cells to measure ligand affinity. Mac-1 conformations were measured by conformation-specific antibodies and molecular dynamics simulations. Neutrophils crawling on immobilized ICAM-1 were measured in presence of oxidized or reduced PDI, and the effect of PDI inhibition using isoquercetin on neutrophil crawling on inflamed endothelial cells was examined. Migration indices in the X- and Y-direction were determined and the crawling speed was calculated. RESULTS: PDI colocalized with high-affinity Mac-1 at the trailing edge of stimulated neutrophils when crawling on ICAM-1 under fluid shear. PDI cleaved 2 allosteric disulfide bonds, C169-C176 and C224-C264, in the ßI domain of the ß2 subunit, and cleavage of the C224-C264 disulfide bond selectively controls Mac-1 disengagement from ICAM-1 under fluid shear. Molecular dynamics simulations and conformation-specific antibodies reveal that cleavage of the C224-C264 bond induces conformational change and mechanical stress in the ßI domain. This allosterically alters the exposure of an αI domain epitope associated with a shift of Mac-1 to a lower-affinity state. These molecular events promote neutrophil motility in the direction of flow at high shear stress. Inhibition of PDI by isoquercetin reduces neutrophil migration in the direction of flow on endothelial cells during inflammation. CONCLUSIONS: Shear-dependent PDI cleavage of the neutrophil Mac-1 C224-C264 disulfide bond triggers Mac-1 de-adherence from ICAM-1 at the trailing edge of the cell and enables directional movement of neutrophils during inflammation.

Resting state functional connectome in breast cancer patients with fear of cancer recurrence.

This study aimed to investigate network-level brain functional changes in breast cancer patients and their relationship with fear of cancer recurrence (FCR). Resting-state functional MRI was collected from 43 patients with breast cancer and 40 healthy controls (HCs). Graph theory analyses, whole-brain voxel-wise functional connectivity strength (FCS) analyses and seed-based functional connectivity (FC) analyses were performed to identify connection alterations in breast cancer patients. Correlations between brain functional connections (i.e. FCS and FC) and FCR level were assessed to further reveal the neural mechanisms of FCR in breast cancer patients. Graph theory analyses indicated a decreased clustering coefficient in breast cancer patients compared to HCs (P = 0.04). Patients with breast cancer exhibited significantly higher FCS in both higher-order function networks (frontoparietal, default mode, and dorsal attention systems) and primary somatomotor networks. Among the hyperconnected regions in breast cancer, the left inferior frontal operculum demonstrated a significant positive correlation with FCR. Our findings suggest that breast cancer patients exhibit less segregation of brain function, and the left inferior frontal operculum is a key region associated with FCR. This study offers insights into the neural mechanisms of FCR in breast cancer patients at the level of brain connectome.

Potential Diaphragm Muscle Weakness-related Dyspnea Persists Two Years after COVID-19 and Could Be Improved by Inspiratory Muscle Training: Results of an Observational and an Interventional Trial.

RATIONALE: Diaphragm muscle weakness might underly persistent exertional dyspnea despite normal lung/cardiac function in individuals previously hospitalized for acute COVID-19 illness. OBJECTIVES: Firstly, to determine the persistence and pathophysiological nature of diaphragm muscle weakness and its association with exertional dyspnea two years after hospitalization for COVID-19, and secondly to investigate the impact of inspiratory muscle training (IMT) on diaphragm and inspiratory muscle weakness and exertional dyspnea in individuals with long COVID. METHODS: ~2 years after hospitalization for COVID-19, 30 individuals (11 female, median age 58 [interquartile range (IQR) 51-63] years) underwent comprehensive (invasive) respiratory muscle assessment and evaluation of dyspnea. Eighteen with persistent diaphragm muscle weakness and exertional dyspnea were randomized to 6 weeks of IMT or sham training; assessments were repeated immediately after and 6 weeks after IMT completion. The primary endpoint was change in inspiratory muscle fatiguability immediately after IMT. RESULTS: At median 31 [IQR 23-32] months after hospitalization, 21/30 individuals reported relevant persistent exertional dyspnea. Diaphragm muscle weakness on exertion and reduced diaphragm cortical activation were potentially related to exertional dyspnea. Compared with sham control, IMT improved diaphragm and inspiratory muscle function (sniff transdiaphragmatic pressure 83 [IQR 75-91] vs. 100 [IQR 81-113] cmH2O; p=0.02), inspiratory muscle fatiguability (time to task failure 365 [IQR 284-701] vs. 983 [IQR 551-1494] sec; p=0.05), diaphragm voluntary activation index (79 [IQR 63-92] vs 89 [IQR 75-94]%; p=0.03), and dyspnea (Borg score 7 [IQR 5.5-8] vs. 6 [IQR 4-7]; p=0.03); improvements persisted for 6 weeks after IMT completion. CONCLUSIONS: This study is the first to identify a potential treatment for persisting exertional dyspnea in long COVID, and provide a possible pathophysiological explanation for the treatment benefit. This article is open access and distributed under the terms of the Creative Commons Attribution Non-Commercial No Derivatives License 4.0 (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Platelet-fibrin clot strength and platelet reactivity predicting cardiovascular events after percutaneous coronary interventions.

BACKGROUND AND AIMS: Platelet-fibrin clot strength (PFCS) is linked to major adverse cardiovascular event (MACE) risk. However, the association between PFCS and platelet reactivity and their prognostic implication remains uncertain in patients undergoing percutaneous coronary intervention (PCI). METHODS: In PCI-treated patients (n = 2512) from registry data from January 2010 to November 2018 in South Korea, PFCS using thromboelastography and platelet reactivity using VerifyNow were measured. High PFCS (PFCSHigh) was defined as thromboelastography maximal amplitude ≥ 68 mm, and high platelet reactivity (HPR) was defined as >208 P2Y12 reaction units. Patients were stratified into four groups according to maximal amplitude and P2Y12 reaction unit levels: (i) normal platelet reactivity (NPR)-PFCSNormal (31.8%), (ii) HPR-PFCSNormal (29.0%), (iii) NPR-PFCSHigh (18.1%), and (iv) HPR-PFCSHigh (21.1%). Major adverse cardiovascular event (all-cause death, myocardial infarction, or stroke) and major bleeding were followed up to 4 years. RESULTS: High platelet reactivity and PFCSHigh showed an additive effect for clinical outcomes (log-rank test, P < .001). Individuals with NPR-PFCSNormal, NPR-PFCSHigh, HPR-PFCSNormal, and HPR-PFCSHigh demonstrated MACE incidences of 7.5%, 12.6%, 13.4%, and 19.3%, respectively. The HPR-PFCSHigh group showed significantly higher risks of MACE compared with the NPR-PFCSNormal group [adjusted hazard ratio (HRadj) 1.89; 95% confidence interval (CI) 1.23-2.91; P = .004] and the HPR-PFCSNormal group (HRadj 1.60; 95% CI 1.12-2.27; P = .009). Similar results were observed for all-cause death. Compared with HPR-PFCSNormal phenotype, NPR-PFCSNormal phenotype was associated with a higher risk of major bleeding (HRadj 3.12; 95% CI 1.30-7.69; P = .010). CONCLUSIONS: In PCI patients, PFCS and platelet reactivity demonstrated important relationships in predicting clinical prognosis. Their combined assessment may enhance post-PCI risk stratification for personalized antithrombotic therapy.

Synergy of Spall Strength and Toughness in Nanograined Metals.

Under shock loading, the spall strength of nanocrystals exhibits intricate grain-size effects due to the presence of abundant grain boundary and dislocation activities. However, the influence of size on spall toughness and void evolution has been largely overlooked. This study employs molecular dynamics simulations to investigate the damage accumulation characteristics of nanocrystalline aluminum across various grain sizes. Unlike the trade-off observed in quasi-static loading conditions, our study reveals a consistency in which grain size governs both nanovoid nucleation and coalescence, yielding a novel spall strength-toughness synergy. These insights highlight grain sizes that are particularly susceptible to spall fracture, offering a crucial understanding of nanocrystal failure mechanisms in extreme environments.

Reverse Mechanotransduction: Driving Chromatin Compaction to Decompaction Increases Cell Adhesion Strength and Contractility.

Mechanical extracellular signals elicit chromatin remodeling via the mechanotransduction pathway, thus determining cellular function. However, the reverse pathway is an open question: does chromatin remodeling shape cells, regulating their adhesion strength? With fluidic force microscopy, we can directly measure the adhesion strength of epithelial cells by driving chromatin compaction to decompaction with chromatin remodelers. We observe that chromatin compaction, induced by performing histone acetyltransferase inhibition or ATP depletion, leads to a reduction in nuclear volume, disrupting actin cytoskeleton and focal adhesion assembly, and ultimately decreases in cell adhesion strength and traction force. Conversely, when chromatin decompaction is drived by removing the remodelers, cells recover their original shape, adhesion strength, and traction force. During chromatin decompaction, cells use depolymerized proteins to restore focal adhesion assemblies rather than neo-synthesized cytoskeletal proteins. We conclude that chromatin remodeling shapes cells, regulating adhesion strength through a reverse mechanotransduction pathway from the nucleus to the cell surface involving RhoA activation.

Fabrication of an Ultrastrong Formaldehyde-Free Wood Adhesive with an Organic-Inorganic Cross-Linking Network.

The wood industry faces challenges in producing eco-friendly, high-performance, and formaldehyde-free adhesives. In this study, carboxylated styrene-butadiene rubber (XSBR) was blended with polyamidoamine-epichlorohydrin (PAE) resin, and a controlled amount of CaCO3 powder was incorporated to create an adhesive with exceptional strength. The resulting three-layer plywood demonstrated remarkable dry and wet shear strengths of 3.09 and 2.36 MPa, respectively, and of 2.27 MPa after boiling water tests, comparable to that of phenolic resins. Additionally, the adhesive exhibited strong adhesion across various materials including glass, metal, etc. This exceptional performance was due to two primary factors: (1) the high-density chemical cross-linking reaction and the physical entanglement between XSBR and PAE; (2) the organic-inorganic hybrid involving metal ion complexation developed by CaCO3, which fostered molecular chain connections and enhanced the adhesive-material interface. These findings offer valuable references for further research in the field of wood adhesives.

Ultrastrong and Deformable Aluminum-Based Composite Nanolaminates with Transformable Binary Intergranular Films.

Nanostructured metals with conventional grain boundaries or interfaces exhibit high strength yet usually poor ductility. Here we report an interface engineering strategy that breaks the strength-ductility dilemma via externally incorporating graphene oxide at lamella boundaries of aluminum (Al) nanolaminates. By forming the binary intergranular films where graphene oxide was sandwiched between two amorphous alumina layers, the Al-based composite nanolaminates achieved ultrahigh compressive strength (over 1 GPa) while retaining excellent plastic deformability. Complementing experimental results with molecular dynamics simulation efforts, the ultrahigh strength was interpreted by the strong blocking effect of the binary intergranular films on dislocation nucleation and propagation, and the excellent plasticity was found to originate from the stress/strain-induced crystalline-to-amorphous transition of graphene oxide and the synergistic deformation between Al nanolamellas and the binary intergranular films.

Excitonic Quantum Coherence in Light Emission from CsPbBr3 Metal-Halide Perovskite Nanocrystals.

The decay of excited states via radiative and nonradiative paths is well understood in molecules and bulk semiconductors but less so in nanocrystals. Here, we perform time-resolved photoluminescence (t-PL) experiments on CsPbBr3 metal-halide perovskite nanocrystals, with a time resolution of 3 ps, sufficient to observe the decay of both excitons and biexcitons as a function of temperature. The striking result is that the radiative rate constant of the single exciton increases at low temperatures with an exponential functional form, suggesting quantum coherent effects with dephasing at high temperatures. The opposing directions of the radiative and nonradiative decay rate constants enable enhanced brightening of PL from excitons to biexcitons due to quantum effects, promoting a faster approach to the quantum theoretical limits of light emission. Ab initio quantum dynamics simulations reproduce the experimental observations of radiation controlled by quantum spatial coherence enhanced at low temperatures.

Damage-Tolerant Wood Layers for Corrosion Protection of Metal Structures.

Mechanically strong and damage-tolerant corrosion protection layers are of great technological importance. However, corrosion protection layers with high modulus (>1.5 GPa) and tensile strength (>100 MPa) are rare. Here, we report that a 130 µm thick densified wood veneer with a Young's modulus of 34.49 GPa and tensile strength of 693 MPa exhibits both low diffusivity for metal ions and the ability of self-recovery from mechanical damage. Densified wood veneer is employed as an intermediate layer to render a mechanically strong corrosion protection structure, referred to as "wood corrosion protection structure", or WCPS. The corrosion rate of low-carbon steel protected by WCPS is reduced by 2 orders of magnitude than state-of-the-art corrosion protection layers during a salt spray test. The introduction of engineered wood veneer as a thin and mechanically strong material points to new directions of sustainable corrosion protection design.