Unveiling synergy of strain and ligand effects in metallic aerogel for electrocatalytic polyethylene terephthalate upcycling.

Recently, there has been a notable surge in interest regarding reclaiming valuable chemicals from waste plastics. However, the energy-intensive conventional thermal catalysis does not align with the concept of sustainable development. Herein, we report a sustainable electrocatalytic approach allowing the selective synthesis of glycolic acid (GA) from waste polyethylene terephthalate (PET) over a Pd67Ag33 alloy catalyst under ambient conditions. Notably, Pd67Ag33 delivers a high mass activity of 9.7 A mgPd-1 for ethylene glycol oxidation reaction (EGOR) and GA Faradaic efficiency of 92.7 %, representing the most active catalyst for selective GA synthesis. In situ experiments and computational simulations uncover that ligand effect induced by Ag incorporation enhances the GA selectivity by facilitating carbonyl intermediates desorption, while the lattice mismatch-triggered tensile strain optimizes the adsorption of *OH species to boost reaction kinetics. This work unveils the synergistic of strain and ligand effect in alloy catalyst and provides guidance for the design of future catalysts for PET upcycling. We further investigate the versatility of Pd67Ag33 catalyst on CO2 reduction reaction (CO2RR) and assemble EGOR//CO2RR integrated electrolyzer, presenting a pioneering demonstration for reforming waste carbon resource (i.e., PET and CO2) into high-value chemicals.

Revealing the Adsorption Behavior of Nitrogen Reduction Reaction on Strained Ti2 CO2 by a Spin-Polarized d-band Center Model.

Electrocatalytic reduction of dinitrogen to ammonia has attracted significant research interest. Herein, it reports the boosting performance of electrocatalytic nitrogen reduction on Ti2 CO2 MXene with an oxygen vacancy through biaxial tensile strain engineering. Specifically, tensile strain modified electronic structures and formation energy of oxygen vacancy are evaluated. The exposed Ti atoms with additional electron states near the Fermi level serve as active site for intermediate adsorption, leading to superior catalytic performance (Ulimit = -0.44 V) under 2.5% biaxial tensile strain through a distal mechanism. However, the two sides of the "Sabatier optimum" in volcano plot are not limited by two different electronic steps, but are induced by the diverse adsorption behaviors of intermediates. Crucially, the "Sabatier optimum" results from the different response speeds of the adsorption energy for *N2 and *NNH to strains. Moreover, the authors observe conventional d-band adsorption for *N2 and *NNH, non-linear adsorption for *NNH2 , and abnormal d-band adsorption for *N, *NH, *NH2 , and *NH3 , which can be explained by the competition between attractive orbital hybridization and repulsive orbital orthogonalization with the spin-polarized d-band model, which further clarifies the contributions of 3σ → dz2 and dxz /dyz → 2π* to the overall population of bonding and anti-bonding states.

Enhanced Thermal Conductivity of Single-Walled Carbon Nanotube with Axial Tensile Strain Enabled by Boron Nitride Nanotube Anchoring.

Thermal conductivity measurements are conducted by optothermal Raman technique before and after the introduction of an axial tensile strain in a suspended single-walled carbon nanotube (SWCNT) through end-anchoring by boron nitride nanotubes (BNNTs). Surprisingly, the axial tensile strain (<0.4 %) in SWCNT results in a considerable enhancement of its thermal conductivity, and the larger the strain, the higher the enhancement. Furthermore, the thermal conductivity reduction with temperature is much alleviated for the strained nanotube compared to previously reported unstrained cases. The thermal conductivity of SWCNT increases with its length is also observed.

Oxygen Vacancies Driven by Co in the Deeply Charged State Inducing Intragranular Cracking of Ni-Rich Cathodes.

Intragranular cracking within the material structure of Ni-rich (LiNixCoyMn1 - x - y, x ≥0.9) cathodes greatly threatens cathode integrity and causes capacity degradation, yet its atomic-scale incubation mechanism is not completely elucidated. Notably, the physicochemical properties of component elements fundamentally determine the material structure of cathodes. Herein, a diffusion-controlled incubation mechanism of intragranular cracking is unraveled, and an underlying correlation model with Co element is established. Multi-dimensional analysis reveals that oxygen vacancies appear due to the charge compensation from highly oxidizing Co ions in the deeply charged state, driving the transition metal migration to Li layer and layered to rock-salt phase transition. The local accumulation of two accompanying tensile strains collaborates to promote the nucleation and growth of intragranular cracks along the fragile rock-salt phase domain on (003) plane. This study focuses on the potential risks posed by Co to the architectural and thermal stability of Ni-rich cathodes and is dedicated to the compositional design and performance optimization of Ni-rich cathodes.

Platelet and endothelial cell responses under concurrent shear stress and tensile strain.

Thrombosis can lead to significant mortality and morbidity. Both platelets and vascular endothelial cells play significant roles in thrombosis. Platelets' response to blood flow-induced shear stress can vary greatly depending on shear stress magnitude, pattern and shear exposure time. Endothelial cells are also sensitive to the biomechanical environment. Endothelial cell activation and dysfunction can occur under low oscillatory shear stress and low tensile strain. Platelet and endothelial cell interaction can also be affected by mechanical conditions. The goal of this study was to investigate how blood flow-induced shear stress, vascular wall tensile strain, platelet-endothelial cell stress history, and platelet-endothelial cell interaction affect platelet thrombogenicity. Platelets and human coronary artery endothelial cells were pretreated with physiological and pathological shear stress and/or tensile strain separately. The pretreated cells were then put together and exposed to pulsatile shear stress and cyclic tensile strain simultaneously in a shearing-stretching device. Following treatment, platelet thrombin generation rate, platelet and endothelial cell activation, and platelet adhesion to endothelial cells was measured. The results demonstrated that shear stress pretreatment of endothelial cells and platelets caused a significant increase in platelet thrombin generation rate, cell surface phosphatidylserine expression, and adhesion to endothelial cells. Shear stress pretreatment of platelets and endothelial cells attenuated endothelial cell ICAM-1 expression under stenosis conditions, as well as vWF expression under recirculation conditions. These results indicate that platelets are sensitized by prior shearing, while in comparison, the interaction with shear stress-pretreated platelets may reduce endothelial cell sensitivity to pathological shear stress and tensile strain.

Effects of different combinations of mechanical loading intensity, duration, and frequency on the articular cartilage in mice.

BACKGROUND: Understanding how healthy articular cartilage responds to mechanical loading is critical. Moderate mechanical loading has positive effects on the cartilage, such as maintaining cartilage homeostasis. The degree of mechanical loading is determined by a combination of intensity, frequency, and duration; however, the best combination of these parameters for knee cartilage remains unclear. This study aimed to determine which combination of intensity, frequency, and duration provides the best mechanical loading on healthy knee articular cartilage in vitro and in vivo. METHODS AND RESULTS: In this study, 33 male mice were used. Chondrocytes isolated from mouse knee joints were subjected to different cyclic tensile strains (CTSs) and assessed by measuring the expression of cartilage matrix-related genes. Furthermore, the histological characteristics of mouse tibial cartilages were quantified using different treadmill exercises. Chondrocytes and mice were divided into the control group and eight intervention groups: high-intensity, high-frequency, and long-duration; high-intensity, high-frequency, and short-duration; high-intensity, low-frequency, and long-duration; high-intensity, low-frequency, and short-duration; low-intensity, high-frequency, and long-duration; low-intensity, high-frequency, and short-duration; low-intensity, low-frequency, and long-duration; low-intensity, low-frequency, and short-duration. In low-intensity CTSs, chondrocytes showed anabolic responses by altering the mRNA expression of COL2A1 in short durations and SOX9 in long durations. Furthermore, low-intensity, low-frequency, and long-duration treadmill exercises minimized chondrocyte hypertrophy and enhanced aggrecan synthesis in tibial cartilages. CONCLUSION: Low-intensity, low-frequency, and long-duration mechanical loading is the best combination for healthy knee cartilage to maintain homeostasis and activate anabolic responses. Our findings provide a significant scientific basis for exercise and lifestyle instructions.

Influence of the Tensile Strain on Electron Transport of Ultra-Thin SiC Nanowires.

The influence of nanomechanical tensile behavior on electron transport is especially interesting for ultra-thin SiC nanowires (NWs) with different diameters. Our studies theoretically show that these NWs can hold stable electron transmission in some strain ranges and that stretching can enhance the electron transmission around the Fermi level (EF) at the strains over 0.5 without fracture for a single-atom SiC chain and at the strains not over 0.5 for thicker SiC NWs. For each size of SiC NW, the tensile strain has a tiny effect on the number of device density of states (DDOSs) peaks but can increase the values. Freshly broken SiC NWs also show certain values of DDOSs around EF. The maximum DDOS increases significantly with the diameter, but interestingly, the DDOS at EF shows little difference among the three sizes of devices in the late stage of the stretching. Essentially, high electron transmission is influenced by high DDOSs and delocalized electronic states. Analysis of electron localization functions (ELFs) indicates that appropriate tensile stress can promote continuous electronic distributions to contribute electron transport, while excessively large stretching deformation of SiC NWs would split electronic distributions and consequently hinder the movement of electrons. These results provide strong theoretical support for the use of ultra-thin SiC NWs in nano-sensors for functional and controllable electronic devices.

Tensile Strain-Mediated Bimetallene Nanozyme for Enhanced Photothermal Tumor Catalytic Therapy.

Nanozymes have demonstrated significant potential in combating malignant tumor proliferation through catalytic therapy. However, the therapeutic effect is often limited by insufficient catalytic performance. In this study, we propose the utilization of strain engineering in metallenes to fully expose the active regions due to their ultrathin nature. Here, we present the first report on a novel tensile strain-mediated local amorphous RhRu (la-RhRu) bimetallene with exceptional intrinsic photothermal effect and photo-enhanced multiple enzyme-like activities. Through geometric phase analysis, electron diffraction profile, and X-ray diffraction, it is revealed that crystalline-amorphous heterophase boundaries can generate approximately 2 % tensile strain in the bimetallene. The ultrathin structure and in-plane strain of the bimetallene induce an amplified strain effect. Both experimental and theoretical evidence support the notion that tensile strain promotes multiple enzyme-like activities. Functioning as a tumor microenvironment (TME)-responsive nanozyme, la-RhRu exhibits remarkable therapeutic efficacy both in vitro and in vivo. This work highlights the tremendous potential of atomic-scale tensile strain engineering strategy in enhancing tumor catalytic therapy.

Tensile-Strained Cu Penetration Electrode Boosts Asymmetric C-C Coupling for Ampere-Level CO2-to-C2+ Reduction in Acid.

The synthesis of multicarbon (C2+) products remains a substantial challenge in sustainable CO2 electroreduction owing to the need for sufficient current density and faradaic efficiency alongside carbon efficiency. Herein, we demonstrate ampere-level high-efficiency CO2 electroreduction to C2+ products in both neutral and strongly acidic (pH = 1) electrolytes using a hierarchical Cu hollow-fiber penetration electrode (HPE). High concentration of K+ could concurrently suppress hydrogen evolution reaction and facilitate C-C coupling, thereby promoting C2+ production in strong acid. By optimizing the K+ and H+ concentration and CO2 flow rate, a faradaic efficiency of 84.5% and a partial current density as high as 3.1 A cm-2 for C2+ products, alongside a single-pass carbon efficiency of 81.5% and stable electrolysis for 240 h were demonstrated in a strong acidic solution of H2SO4 and KCl (pH = 1). Experimental measurements and density functional theory simulations suggested that tensile-strained Cu HPE enhances the asymmetric C-C coupling to steer the selectivity and activity of C2+ products.

IL-6/Stat3 suppresses osteogenic differentiation in ossification of the posterior longitudinal ligament via miR-135b-mediated BMPER reduction.

Interleukin-6 (IL-6) has been reported to induce osteogenic differentiation of mesenchymal stem cells for increasing bone regeneration, while the role of IL-6 in osteogenic differentiation during ossification of the posterior longitudinal ligament (OPLL) remains to be determined. The current study aims to explore the downstream mechanism of IL-6 in cyclic tensile strain (CTS)-stimulated OPLL, which involves bioinformatically identified microRNA-135b (miR-135b). Initially, we clinically collected posterior longitudinal ligament (PLL) and ossified PLL tissues, from which ossified PLL cells were isolated, respectively. The obtained data revealed a greater osteogenic property of ossified PLL than non-ossified PLL cells. The effect of regulatory axis comprising IL-6, Stat3, miR-135b, and BMPER on osteogenic differentiation of CTS-stimulated ossified PLL cells was examined with gain- and loss-of-function experiments. BMPER was confirmed as a target gene to miR-135b. Knockdown of BMPER or overexpression of miR-135b inhibited the osteogenic differentiation of CTS-induced ossification in PLL cells. Besides, IL-6 promoted the post-transcriptional process to mature miR-135b via Stat3 phosphorylation. In conclusion, IL-6 inhibited CTS-induced osteogenic differentiation by inducing miR-135b-mediated inhibition of BMPER through Stat3 activation.

Phonon thermal transport in ferroelectricα-In2Se3 via first-principles calculations.

Two-dimensional (2D) ferroelectrics are promising candidates in the field of microelectronics due to their unique properties such as excellent photoelectric responsiveness. However, the thermal properties of 2D ferroelectrics are less investigated. Here, the thickness dependent thermal conductivity in ferroelectricα-In2Se3is systematically investigated by the first-principles method combined with the phonon Boltzmann transport equation. On this basis, the strain and oxidation effects on the thermal conductivity of monolayerα-In2Se3is further studied. The calculation results show that the thermal conductivity has a significant reduction with decreasing film thickness or increasing tensile strain, and the anharmonic phonon-phonon scattering rate is the intrinsic mechanism for the reduction in thermal conductivity. On the other hand, the replacement of Se atoms by O atoms can achieve a bidirectional and wide-range (12×) tuning of thermal conductivity. The increase in specific heat and phonon group velocity is responsible for the thermal conductivity enhancement at high doping levels while that in phonon-phonon scattering rate is responsible for the thermal conductivity reduction at low doping levels. In all cases, acoustic phonons dominate the in-plane thermal transport behavior. These findings broaden our understanding of phonon transport and its control in ferroelectric semiconductorα-In2Se3.

High sensitivity graphene based health sensor with self-warning function.

In order to reduce the damage to people's health from diseases that attack the respiratory system such as COVID-19, asthma, and pneumonia, it is desired that patients' breathing can be monitored and alerted in real-time. The emergence of wearable health detection sensing devices has provided a relatively good response to this problem. However, there are still problems such as complex structure and poor performance. This paper introduces a laser-induced graphene (LIG) device that is attached to PDMS. The LIG is produced by laser irradiation of Nomex and subsequently transferred and attached to the PDMS. After being tested, it has demonstrated high sensitivity, stable tensile performance, good acoustic performance, excellent thermal stability, and other favorable properties. Notably, its gauge factor (GF) value can reach 721.67, which is quite impressive. Additionally, it is capable of emitting an alarm sound with an SPL close to 60 dB when receiving signals within the range of 5-20 kHz. The device realizes mechanical sensing and acoustic functions in one chip, and has a high application value in applications that need to combine sensing and early warning.

Exchange between Interlayer and Intralayer Exciton in WSe2/WS2 Heterostructure by Interlayer Coupling Engineering.

Because of type-II band alignment, interlayer exciton (IX) is found in a van der Waals (vdW) heterostructure (HS) formed by two monolayers of transition-metal dichalcogenides. Manipulation of IXs is of great importance for excitonic integrated devices. Here, we demonstrate that high pressure and tensile strain can be applied to enhance and reduce interlayer coupling of WSe2/WS2 HS, respectively. High pressure induces the transform of intralayer excitons to IX, while tensile strain leads to the transform of IXs to intralayer excitons. In addition, there is a direct-to-indirect band gap transition of WSe2/WS2 HS. The interlayer distance of WSe2/WS2 HS is reduced under high pressure, but it increased under uniaxial tensile strain from first-principles calculations. The calculated band structures explain well the transformation between interlayer and intralayer excitons of WSe2/WS2 HS. This work demonstrates the exchange of interlayer and intralayer excitons and paves the way to manipulate excitons of HS for excitonic applications.

Strain Tunability of Perpendicular Magnetic Anisotropy in van der Waals Ferromagnets VI3.

Layered ferromagnets with strong magnetic anisotropy energy (MAE) have special applications in nanoscale memory elements in electronic circuits. Here, we report a strain tunability of perpendicular magnetic anisotropy in van der Waals (vdW) ferromagnets VI3 using magnetic circular dichroism measurements. For an unstrained flake, the M-H curve shows a rectangular-shaped hysteresis loop with a large coercivity (1.775 T at 10 K) and remanent magnetization. Furthermore, the coercivity can be enhanced to a maximum of 2.6 T under a 3.8% external in-plane tensile strain. Our DFT calculations show that the increased MAE under strain contributes to the enhancement of coercivity. Meanwhile, the strain tunability on the coercivity of CrI3, with a similar crystal structure, is limited. The main reason is the strong spin-orbit coupling in V3+ in VI6 octahedra in comparison with that in Cr3+. The strain tunability of coercivity in VI3 flakes highlights its potential for integration into vdW heterostructures.

Core-Shell Nanostructured Ru@Ir-O Electrocatalysts for Superb Oxygen Evolution in Acid.

The design of highly active and durable catalysts for the sluggish anodic oxygen evolution reaction (OER) in acid remains an urgent yet challenging goal in water electrolysis. Herein, a core-shell nanostructured Ru@Ir-O catalyst with tensile strains and incorporated oxygens is introduced in the Ir shell that holds an extremely low OER overpotential of 238 mV at 10 mA cm-2 in acid. The material also shows a remarkable 78-fold higher mass activity than the conventional IrO2 at 1.55 V in 0.5 M H2 SO4 . Structural characterization and theoretical calculations reveal that the core-shell interaction and tensile strain cause band position shift and charge redistribution. These electronic factors furthermore optimize the bonding strength of O* and HOO* intermediates on the surface, yielding significantly boosted OER activity relative to the conventional IrO2 .

Effect of Different Parameters of In Vitro Static Tensile Strain on Human Periodontal Ligament Cells Simulating the Tension Side of Orthodontic Tooth Movement.

This study aimed to investigate the effects of different magnitudes and durations of static tensile strain on human periodontal ligament cells (hPDLCs), focusing on osteogenesis, mechanosensing and inflammation. Static tensile strain magnitudes of 0%, 3%, 6%, 10%, 15% and 20% were applied to hPDLCs for 1, 2 and 3 days. Cell viability was confirmed via live/dead cell staining. Reference genes were tested by reverse transcription quantitative real-time polymerase chain reaction (RT-qPCR) and assessed. The expressions of TNFRSF11B, ALPL, RUNX2, BGLAP, SP7, FOS, IL6, PTGS2, TNF, IL1B, IL8, IL10 and PGE2 were analyzed by RT-qPCR and/or enzyme-linked immunosorbent assay (ELISA). ALPL and RUNX2 both peaked after 1 day, reaching their maximum at 3%, whereas BGLAP peaked after 3 days with its maximum at 10%. SP7 peaked after 1 day at 6%, 10% and 15%. FOS peaked after 3 days with its maximum at 3%, 6% and 15%. The expressions of IL6 and PTGS2 both peaked after 1 day, with their minimum at 10%. PGE2 peaked after 1 day (maximum at 20%). The ELISA of IL6 peaked after 3 days, with the minimum at 10%. In summary, the lower magnitudes promoted osteogenesis and caused less inflammation, while the higher magnitudes inhibited osteogenesis and enhanced inflammation. Among all magnitudes, 10% generally caused a lower level of inflammation with a higher level of osteogenesis.

Extraordinary p-d Hybridization Interaction in Heterostructural Pd-PdSe Nanosheets Boosts C-C Bond Cleavage of Ethylene Glycol Electrooxidation.

Advanced electrocatalysts for complete oxidation of ethylene glycol (EG) in direct EG fuel cells are strongly desired owing to the higher energy efficiency. Herein, Pd-PdSe heterostructural nanosheets (Pd-PdSe HNSs) have been successfully fabricated via a one-step approach. These Pd-PdSe HNSs feature unique electronic and geometrical structures, in which unconventional p-d hybridization interactions and tensile strain effect co-exist. Compared with commercial Pd/C and Pd NSs catalysts, Pd-PdSe HNSs display 5.5 (6.6) and 2.5 (2.6) fold enhancement of specific (mass) activity for the EG oxidation reaction (EGOR). Especially, the optimum C1 pathway selectivity of Pd-PdSe HNSs reaches 44.3 %, illustrating the superior C-C bond cleavage ability. Electrochemical in situ FTIR spectroscopy and theoretical calculations demonstrate that the extraordinary p-d hybridization interaction and tensile strain effect could effectively reduce the activation energy of C-C bond breaking and accelerate CO* oxidation, boosting the complete oxidation of EG and improving the catalytic performance.

Involvement of mechanosensitive ion channels in the effects of mechanical stretch induces osteogenic differentiation in mouse bone marrow mesenchymal stem cells.

Bone marrow mesenchymal stem cells (BMSCs) can be induced to process osteogenic differentiation with appropriate mechanical and/or chemical stimuli. The present study described the successful culture of murine BMSCs under mechanical strain. BMSCs were subjected to 0%, 3%, 8%, 13%, and 18% cyclic tensile strain at 0.5 Hz for 8 hr/day for 3 days. The expression of osteogenic markers and mechanosensitive ion channels was evaluated with real-time reverse transcription-polymerase chain reaction (RT-PCR) and western blot. The expression of alkaline phosphatase (ALP) and matrix mineralization were evaluated with histochemical staining. To investigate the effects of mechanosensitive ion channel expression on cyclic tensile strain-induced osteogenic differentiation, the expression of osteogenic markers was evaluated with real-time RT-PCR in the cells without mechanosensitive ion channel expression. This study revealed a significant augment in osteogenic marker in BMSC strained at 8% compared to other treatments; therefore, an 8% strain was used for further investigations. The ALP expression and matrix mineralization were enhanced in osteogenic induced BMSCs subjected to 8% strain after 7 and 14 days, respectively. Under the same conditions, the osteogenic marker and mechanosensitive ion channel expression were significantly promoted. However, the loss function of mechanosensitive ion channels resulted in the inhibition of osteogenic marker expression. This study demonstrated that strain alone can successfully induce osteogenic differentiation in BMSCs and the expression of mechanosensitive ion channels was involved in the process. The current findings suggest that mechanical stretch could function as efficient stimuli to induce the osteogenic differentiation of BMSCs via the activation of mechanosensitive ion channels.

Construction of Lattice Strain in Bimetallic Nanostructures and Its Effectiveness in Electrochemical Applications.

Bimetallic nanocrystals (NCs), associated with various surface functions such as ligand effect, ensemble effect, and strain effect, exhibit superior electrocatalytic properties. The stress-induced surface strain effect can alter binding strength between the surface active sites and reactants as well as their intermediates, and the electrochemical performance of bimetallic NCs can be significantly facilitated by the lattice-strain modification via their morphologies, sizes, shell-thickness, surface defectiveness as well as compositions. In this review, an overview of fundamental principles, characterization techniques, and quantitative determination of the surface lattice strain is provided. Various strategies and synthesis efforts on creating lattice-strain-engineered bimetallic NCs, including the de-alloying process, atomic layer-by-layer deposition, thermal treatment evolution, one-pot synthesis, and other efforts are also discussed. It is further outlined how the lattice strain effect promotes electrochemical catalysis through the selected case studies. The reactions on oxygen reduction reaction, small molecular oxidation, water splitting reaction, and electrochemical carbon dioxide reduction reactions are focused. In particular, studies of lattice strain arisen from core-shell nanostructure and defectiveness are highlighted. Lastly, the potential challenges are summarized and the prospects of lattice-strain-based engineering on bimetallic nanocatalysts with suggestion and guidance of the future electrocatalyst design are envisioned.

Managing Defects Density and Interfacial Strain via Underlayer Engineering for Inverted CsPbI2 Br Perovskite Solar Cells with All-Layer Dopant-Free.

Inorganic perovskite CsPbI2 Br has advantages of excellent thermal stability and reasonable bandgap, which make it suitable for top layer of tandem solar cells. Nevertheless, solution-processed all-inorganic perovskites generally suffer from high-density defects as well as significant tensile strain near underlayer/perovskite interface, both leading to compromised device efficiency and stability. In this work, the defect density as well as interfacial tensile strain in inverted CsPbI2 Br perovskite solar cells (PeSCs) is remarkably reduced by using a bilayer underlayer composed of dopant-free 2,2',7,7'-tetrakis(N,N-dip-methoxyphenylamine)-9,9'-spirobifluorene (Spiro-OMeTAD) and copper phthalocyanine 3,4',4″,4'″-tetrasulfonated acid tetrasodium salt (TS-CuPc) nanoparticles. As compared to control devices with pristine Spiro-OMeTAD, devices based on Spiro-OMeTAD/TS-CuPc exhibit remarkably improved photovoltaic performance and enhanced thermal/humidity stability due to the better perovskite crystallization, improved interfacial passivation, and hole-collection as well as efficient interfacial strain release. As a result, a champion efficiency of 14.85% can be achieved, which is approaching to the best reported for dopant-free and inverted all-inorganic PeSCs. The work thus provides an efficient strategy to simultaneously regulate the defects density and strain issue related to inorganic perovskites.