Understanding and Mitigating Atomic Oxygen-Induced Degradation of Perovskite Solar Cells for Near-Earth Space Applications.

Combining high efficiency with good radiation tolerance, perovskite solar cells (PSCs) are promising candidates to upend expanding space photovoltaic (PV) technologies. Successful employment in a Near-Earth space environment, however, requires high resistance against atomic oxygen (AtOx). This work unravels AtOx-induced degradation mechanisms of PSCs with and without phenethylammonium iodide (PEAI) based 2D-passivation and investigates the applicability of ultrathin silicon oxide (SiO) encapsulation as AtOx barrier. AtOx exposure for 2 h degraded the average power conversion efficiency (PCE) of devices without barrier encapsulation by 40% and 43% (w/o and with 2D-PEAI-passivation) of their initial PCE. In contrast, devices with a SiO-barrier retained over 97% of initial PCE. To understand why 2D-PEAI passivated devices degrade faster than less efficient non-passivated devices, various opto-electrical and structural characterications are conducted. Together, these allowed to decouple different damage mechanisms. Notably, pseudo-J-V curves reveal unchanged high implied fill factors (pFF) of 86.4% and 86.2% in non-passivated and passivated devices, suggesting that degradation of the perovskite absorber itself is not dominating. Instead, inefficient charge extraction and mobile ions, due to a swiftly degrading PEAI interlayer are the primary causes of AtOx-induced device performance degradation in passivated devices, whereas a large ionic FF loss limits non-passivated devices.

Activation of polyimide by oxygen plasma for atomic layer deposition of highly compact titanium oxide coating.

Titanium oxide (TiO2) coated polyimide has broad application prospects under extreme conditions. In order to obtain a high-quality ultra-thin TiO2coating on polyimide by atomic layer deposition (ALD), the polyimide was activated byin situoxygen plasma. It was found that a large number of polar oxygen functional groups, such as carboxyl, were generated on the surface of the activated polyimide, which can significantly promote the preparation of TiO2coating by ALD. The nucleation and growth of TiO2were studied by x-ray photoelectron spectroscopy monitoring and scanning electron microscopy observation. On the polyimide activated by oxygen plasma, the size of TiO2nuclei decreased and the quantity of TiO2nuclei increased, resulting in the growth of a highly uniform and dense TiO2coating. This coating exhibited excellent resistance to atomic oxygen. When exposed to 3.5 × 1021atom cm-2atomic oxygen flux, the erosion yield of the polyimide coated with 100 ALD cycles of TiO2was as low as 3.0 × 10-25cm3/atom, which is one order less than that of the standard POLYIMIDE-ref Kapton®film.

Mechanisms of Atomic Oxygen Erosion in Fluorinated Polyimides Investigated by Molecular Dynamics Simulations.

Traditional polyimides have highly conjugated structures, causing significant coloration under visible light. Fluorinated colorless polyimides, known for their light weight and excellent optical properties, are considered ideal for future aerospace optical lenses. However, their lifespan in low Earth orbit is severely limited by high-density atomic oxygen (AO) erosion, and the degradation behavior of fluorinated polyimides under AO exposure is not well understood. This study uses reactive molecular dynamics simulations to model two fluorinated polyimides, PMDA-TFMB and 6FDA-TFMB, with different fluorine contents, to explore their degradation mechanisms under varying AO concentrations. The results indicate that 6FDA-TFMB has slightly better resistance to erosion than PMDA-TFMB, mainly due to the enhanced chemical stability from its -CF3 groups. As AO concentration increases, widespread degradation of the polyimides occurs, with AO-induced cleavage and temperature-driven pyrolysis happening simultaneously, producing CO and OH as the main degradation products. This study uncovers the molecular-level degradation mechanisms of fluorinated polyimides, offering new insights for the design of AO erosion protection systems.

C-H Activation by Iron-Vanadium Bimetallic Oxide Cluster Anions FeV3 O10 - and FeV5 O15 - : A Comparison with Scandium-Vanadium Oxide Clusters.

Late transition metal-bonded atomic oxygen radicals (LTM-O⋅- ) have been frequently proposed as important active sites to selectively activate and transform inert alkane molecules. However, it is extremely challenging to characterize the LTM-O⋅- -mediated elementary reactions for clarifying the underlying mechanisms limited by the low activity of LTM-O⋅- radicals that is inaccessible by the traditional experimental methods. Herein, benefiting from our newly-designed ship-lock type reactor, the reactivity of iron-vanadium bimetallic oxide cluster anions FeV3 O10 - and FeV5 O15 - featuring with Fe-O⋅- radicals to abstract a hydrogen atom from C2 -C4 alkanes has been experimentally characterized at 298 K, and the rate constants are determined in the orders of magnitude of 10-14 to 10-16  cm3 molecule-1 s-1 , which are four orders of magnitude slower than the values of counterpart ScV3 O10 - and ScV5 O15 - clusters bearing Sc-O⋅- radicals. Theoretical results reveal that the rearrangements of the electronic and geometric structures during the reaction process function to modulate the activity of Fe-O⋅- . This study not only quantitatively characterizes the elementary reactions of LTM-O⋅- radicals with alkanes, but also provides new insights into structure-activity relationship of M-O⋅- radicals.

The Nature of the Chemical Bonds of High-Valent Transition-Metal Oxo (M=O) and Peroxo (MOO) Compounds: A Historical Perspective of the Metal Oxyl-Radical Character by the Classical to Quantum Computations.

This review article describes a historical perspective of elucidation of the nature of the chemical bonds of the high-valent transition metal oxo (M=O) and peroxo (M-O-O) compounds in chemistry and biology. The basic concepts and theoretical backgrounds of the broken-symmetry (BS) method are revisited to explain orbital symmetry conservation and orbital symmetry breaking for the theoretical characterization of four different mechanisms of chemical reactions. Beyond BS methods using the natural orbitals (UNO) of the BS solutions, such as UNO CI (CC), are also revisited for the elucidation of the scope and applicability of the BS methods. Several chemical indices have been derived as the conceptual bridges between the BS and beyond BS methods. The BS molecular orbital models have been employed to explain the metal oxyl-radical character of the M=O and M-O-O bonds, which respond to their radical reactivity. The isolobal and isospin analogy between carbonyl oxide R2C-O-O and metal peroxide LFe-O-O has been applied to understand and explain the chameleonic chemical reactivity of these compounds. The isolobal and isospin analogy among Fe=O, O=O, and O have also provided the triplet atomic oxygen (3O) model for non-heme Fe(IV)=O species with strong radical reactivity. The chameleonic reactivity of the compounds I (Cpd I) and II (Cpd II) is also explained by this analogy. The early proposals obtained by these theoretical models have been examined based on recent computational results by hybrid DFT (UHDFT), DLPNO CCSD(T0), CASPT2, and UNO CI (CC) methods and quantum computing (QC).

Methane Activation by (MoO3 )5 O- Cluster Anions: The Importance of Orbital Orientation.

The reactivity of the molybdenum oxide cluster anion (MoO3 )5 O- , bearing an unpaired electron at a bridging oxygen atom (Ob .- ), towards methane under thermal collision conditions has been studied by mass spectrometry and density functional theory calculations. This reaction follows the mechanism of hydrogen atom transfer (HAT) and is facilitated by the Ob .- radical center. The reactivity of (MoO3 )5 O- can be traced back to the appropriate orientation of the lowest unoccupied molecular orbitals (LUMO) that is essentially the 2p orbital of the Ob .- atom. This study not only makes up the blank of thermal methane activation by the Ob .- radical on negatively charged clusters but also yields new insights into methane activation by the atomic oxygen radical anions.

Synthesis of triphenylphosphonium dibenzothiophene S-oxide derivatives and their effect on cell cycle as photodeoxygenation-based cytotoxic agents.

Photodeoxygenation of Dibenzothiophene-S-oxide (DBTO) in UV-A light produces atomic oxygen [O(3P)] and the corresponding sulfide, dibenzothiophene (DBT). Recently, DBTO has been derivatized to study the effect of UV-A light-driven photodeoxygenation in lipids, proteins, and nucleic acids. In this study, two DBTO derivatives with triphenylphosphonium groups were synthesized to promote mitochondrial accumulation. The sulfone analogs of these derivatives were also synthesized and used as fluorescent mitochondrial dyes to assess localization in mitochondria of HeLa cells. These derivatives were then used to study the effect of photodeoxygenation on MDA-MB-231 breast cancer cell line using cell viability assays, cell cycle phase determination tests, and RNA-Seq analysis. The DBTO derivatives were found to significantly decrease cell viability only after UV-A irradiation as a result of generating corresponding sulfides that were found to significantly affect gene expression and cell cycle.

Development of Cycloaliphatic Epoxy-POSS Nanocomposite Matrices with Lambas Enhanced Resistance to Atomic Oxygen.

The preparation of ultra-thin CFRP laminates, which incorporate a cycloaliphatic epoxy resin reinforced with polyhedral oligomeric silsesquioxane (POSS) reagent nanofiller, using out-of-autoclave procedure is reported. The influence of the amount of POSS within the laminate on the mechanical properties and surface roughness of the laminates is analysed before and after exposure to atomic oxygen (AO) to simulate the effects of low Earth orbit (LEO). The addition of 5 wt% POSS to the base epoxy leads to an increase in both flexural strength and modulus, but these values begin to fall as the POSS content rises, possibly due to issues with agglomeration. The addition of POSS offers improved resistance against AO degradation with the laminates containing 20 wt% POSS demonstrating the lowest erosion yield (1.67 × 10-24 cm2/atom) after the equivalent of a period of 12 months in a simulated LEO environment. Exposure to AO promotes the formation of a silicon-rich coating layer on the surface of the laminate, which in turn reduces roughness and increases stiffness, as evidenced by measurements of flexural properties and spectral data after exposure.

Theoretical study on the degradation reaction of octachlorinated dibenzo-p-dioxin with atomic oxygen O((3)P) in dielectric barrier discharge reactor.

Dielectric barrier discharges (DBD) have been used in the degradation of dioxins due to the large number of excimers and free radicals produced in discharge process. In this article, the density functional theory (DFT) is used to study the degradation mechanism of octachlorinated dibenzo-p-dioxin (OCDD) with the atomic oxygen O((3)P) in DBD reactor. The reactants, intermediates, transition states and products are optimized at the MPWB1K/6-31+G(d,p) level. The vibrational frequencies have been calculated at the same level. The reaction pathways and mechanisms are analyzed in detail. The effect of removing the chlorine atom on environment also has been discussed.

Photochemistry of N-aryl and N-alkyl dibenzothiophene sulfoximines.

N-phenyl dibenzothiophene sulfoximine has been demonstrated to produce phenyl nitrene and dibenzothiophene S-oxide upon irradiation with UV-A light, and dibenzothiophene S-oxide upon further irradiation releases triplet atomic oxygen. Thus, N-phenyl dibenzothiophene sulfoximine exhibits a rare dual-release capability in its photochemistry. In this work, N-substituted dibenzothiophene sulfoximine derivatives are irradiated with UV-A light to compare their photochemistry and quantum yield of dibenzothiophene S-oxide production with that of N-phenyl dibenzothiophene sulfoximine. Both N-aryl and N-alkyl derivatives of dibenzothiophene sulfoximine are examined to observe their effects on the quantum yield of the photolysis reaction. Adding electron withdrawing N-aryl substituents is shown to increase the quantum yield of dibenzothiophene S-oxide production, while adding electron donating N-aryl substituents is shown to decrease the quantum yield. The quantum yield was slightly lowered or not increased by most N-alkyl substituents. Furthermore, the quantum yield was not augmented by branching and steric hindrance effects associated with the N-alkyl substituents. These results suggest that electronic modulation of the sulfoximine bonds affects the observed photolysis reaction.

The relevant effect of marine salt and epiphytes on Posidonia oceanica waste pyrolysis: Removal of SO2/HCl emissions and promotion of O/HCOOH formation.

Significant quantities of Posidonia oceanica deposit on some beaches and coastlines every year, which generates high costs associated with the disposal of this waste. Pyrolysis may be an adequate way for its valorization. However, it would imply to know how the process takes place and if the removal of its natural detrital inorganic matter (epiphytes, marine salt and sand) is necessary, which are the objectives of this research. Pyrolysis by thermogravimetry-mass spectrometry was carried out on both the washed and unwashed samples. During this waste pyrolysis, the following occurs: (i) the high alkali metal chloride content promotes fragmentation reactions of carbohydrates and O formation, which increases HCOOH intensities at temperatures between 250 and 360 °C; (ii) from 500 °C to 650 °C, Fe2O3 and decomposition of carbonates seem to be involved in reactions that produce O release and steam and CO2 reforming of hydrocarbons and oxygenated organic compounds with H2 generation; (iii) from 650 °C to 750 °C, Fe2O3, high alkali metal content and carbonate decomposition generate char gasification, an increase in O release, SO2 capture and HCOOH formation. In general, the abundance of inorganic matter (chlorides, carbonates, etc.) minimizes the release of various compounds during pyrolysis, including SO2 and HCl, while increasing HCOOH production. Thus, this high content of inorganic matter may represent an advantage for its pyrolysis, producing value-added chemical products with a reduced environmental impact. Therefore, this study may be the starting point for defining the optimal pyrolysis conditions for this waste valorisation.

Preparation and Characterization of Atomic Oxygen-Resistant, Optically Transparent and Dimensionally Stable Copolyimide Films from Fluorinated Monomers and POSS-Substituted Diamine.

Optically transparent polyimide (PI) films with good atomic oxygen (AO) resistance have been paid extensive attention as thermal controls, optical substrates for solar cells or other components for low Earth orbit (LEO) space applications. However, for common PI films, it is usually quite difficult to achieve both high optical transparency and AO resistance and maintain the intrinsic thermal stability of the PI films at the same time. In the current work, we aimed to achieve the target by using the copolymerization methodology using the fluorinated dianhydride 9,9-bis(trifluoromethyl)xanthene-2,3,6,7-tetracarboxylic dianhydride (6FCDA), the fluorinated diamine 2,2-bis [4-(4-aminophenoxy)phenyl]hexafluoropropane (BDAF) and the polyhedral oligomeric silsesquioxane (POSS)-containing diamine N-[(heptaisobutyl-POSS)propyl]-3,5-diaminobenzamide (DABA-POSS) as the starting materials. The fluoro-containing monomers were used to endow the PI films with good optical and thermal properties, while the silicon-containing monomer was used to improve the AO resistance of the afforded PI films. Thus, the 6FCDA-based PI copolymers, including 6FCPI-1, 6FCPI-2 and 6FCPI-3, were prepared using a two-step chemical imidization procedure, respectively. For comparison, the analogous PIs, including 6FPI-1, 6FPI-2 and 6FPI-3, were correspondingly developed according to the same procedure except that 6FCDA was replaced by 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA). Two referenced PI homopolymers were prepared from BDAF and 6FDA (PI-ref1) and 6FCDA (PI-ref2), respectively. The experimental results indicated that a good balance among thermal stability, optical transparency, and AO resistance was achieved by the 6FCDA-PI films. For example, the 6FCDA-PI films exhibited good thermal stability with glass transition temperatures (Tg) up to 297.3 °C, good optical transparency with an optical transmittance at a wavelength of 450 nm (T450) higher than 62% and good AO resistance with the erosion yield (Ey) as low as 1.7 × 10-25 cm3/atom at an AO irradiation fluence of 5.0 × 1020 atoms/cm2. The developed 6FCDA-PI films might find various applications in aerospace as solar sails, thermal control blankets, optical components and other functional materials.

Kinetics of Surface Wettability of Aromatic Polymers (PET, PS, PEEK, and PPS) upon Treatment with Neutral Oxygen Atoms from Non-Equilibrium Oxygen Plasma.

The wettability of polymers is usually inadequate to ensure the appropriate spreading of polar liquids and thus enable the required adhesion of coatings. A standard ecologically benign method for increasing the polymer wettability is a brief treatment with a non-equilibrium plasma rich in reactive oxygen species and predominantly neutral oxygen atoms in the ground electronic state. The evolution of the surface wettability of selected aromatic polymers was investigated by water droplet contact angles deposited immediately after exposing polymer samples to fluxes of oxygen atoms between 3 × 1020 and 1 × 1023 m-2s-1. The treatment time varied between 0.01 and 1000 s. The wettability evolution versus the O-atom fluence for all aromatic polymers followed similar behavior regardless of the flux of O atoms or the type of polymer. In the range of fluences between approximately 5 × 1020 and 5 × 1023 m-2, the water contact angle decreased exponentially with increasing fluence and dropped to 1/e of the initial value after receiving the fluence close to 5 × 1022 m-2.

Preparation and Properties of Atomic-Oxygen Resistant Polyimide Films Based on Multi-Ring Fluoro-Containing Dianhydride and Phosphorus-Containing Diamine.

Colorless and transparent polyimide (CPI) films with good atomic oxygen (AO) resistance and high thermal endurance are highly required in low earth orbit (LEO) space exploration. Conventional CPI films based on fluoro-containing 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) have been widely used in space applications. However, the AO erosion yields and glass transition temperatures (Tg) of the 6FDA-based CPI films have to be modified in order to meet the severe serving environments. In the current work, novel CPI films based on a multi-ring fluoro-containing 9,9-bis(trifluoromethyl)xanthene-2,3,6,7-tetracarboxylicdianhydride (6FCDA) monomer were developed. In order to enhance the AO resistance of the derived CPI film, a phosphorus-containing aromatic diamine, 2,5-bis[(4-aminophenoxy)phenyl]diphenylphosphine oxide (BADPO) was used to polymerize with the dianhydride to create the organo-soluble resin. Then, two phosphorus-containing CPI films (PPI), including PPI-1 (6FDA-BADPO) and PPI-2 (6FCDA-BADPO) were prepared by thermally curing of the PPI solutions at elevated temperatures. The PPI films maintained good optical transparency with transmittance values over 80% at a wavelength of 450 nm. PPI-2 exhibited a Tg value of 311.0 °C by differential scanning calorimetry (DSC) measurement, which was 46.7 °C higher than that of the PPI-1 counterpart (Tg = 264.3 °C). In addition, the PPI-2 film showed a coefficient of linear thermal expansion (CTE) value of 41.7 × 10-6/K in the range of 50~250 °C, which was apparently lower than that of the PPI-1 sample (CTE = 49.2 × 10-6/K). Lastly, both of the two PPI films exhibited good AO resistance with the erosion yields (Ey) of 6.99 × 10-25 cm3/atom for PPI-1 and 7.23 × 10-25 cm3/atom for PPI-2 at an exposure flux of 5.0 × 1020 atoms/cm2. The Ey values of the current PPI films were obviously lower than that of the standard polyimide (PI) film based on pyromellitic dianhydride (PMDA) and 4,4'-oxydianiline (ODA) (Ey = 3.0 × 10-24 cm3/atom).

Reactivity of Atomic Oxygen Radical Anions in Metal Oxide Clusters.

Atomic oxygen radical anion (O⋅-) represents an important type of reactive centre that exists in both chemical and biological systems. Gas-phase atomic clusters can be studied under isolated and well controlled conditions. Studies of O⋅--containing clusters in the gas-phase provide a unique strategy to interpret the chemistry of O⋅- radicals at a strictly molecular level. This review summarizes the research progresses made since 2013 for the reactivity of O⋅- radicals in the atomically precise metal oxide clusters including negatively charged, nanosized, and neutral heteronuclear metal clusters benefitting from the development of advanced experimental techniques. New electronic and geometric factors to control the reactivity and product selectivity of O⋅- radicals under dark and photo-irradiation conditions have been revealed. The detailed mechanisms of O⋅- generation have been discussed for the reaction systems of nanosized and heteroatom-doped metal oxide clusters. The catalytic reactions mediated by the O⋅- radicals in metal clusters have also been successfully established and the microscopic mechanisms about the dynamic generation and depletion of O⋅- radicals have been clearly understood. The studies of O⋅- containing metal oxide clusters in the gas-phase provided new insights into the chemistry of reactive oxygen species in related condensed-phase systems.

Ladder Polyphenylsilsesquioxanes and Their Niobium-Siloxane Composite as Coating Materials: Spectroscopy and Atomic Oxygen Resistance Study.

In order to expand the range of materials that can be used in outer space and in development of small spacecraft, ladder polyphenylsilsesquioxanes with different molar weights and the Nb-siloxane composites based on them were studied. The properties of the polymer films were studied, including tests in an oxygen plasma flow. Both initial and filled ladder polymers feature extremely low erosion coefficients in the region of 10-26 cm3/atom O at a high fluence of atomic oxygen of 1.0 × 1021 atom O/cm2. Ladder polyphenylsilsesquioxane films irradiated with atomic oxygen (AO) retain their integrity, do not crack, and exhibit good optical properties, in particular, a high transmittance. The latter slightly decreases during AO exposure. The Nb-siloxane filling retains the AO resistance and slight decrease in optical transmission due to diffuse scattering on the formed Nb-[(SiO)x] nanoparticles. Ladder polyphenylsilsesquioxanes demonstrate their suitability for creating protective, optically transparent coatings for small spacecraft that are resistant to the erosive effects of incoming oxygen plasma.

High Wear Resistance of POSS Grafted-Polyimide/Silica Composites under Atomic Oxygen Conditions.

Polyimide-bearing retainer has been successfully used in space environment. However, the structural damage of polyimide induced by space irradiation limits its wide use. In order to further improve the atomic oxygen resistance of polyimide and comprehensively investigate the tribological mechanism of polyimide composites exposed in simulate space environment, 3-amino-polyhedral oligomeric silsesquioxane (NH2-POSS) was incorporated into a polyimide molecular chain and silica (SiO2) nanoparticles were in situ added into polyimide matrix and the combined effect of vacuum environment, and atomic oxygen (AO) on the tribological performance of polyimide was studied using bearing steel as the counterpart by a ball on disk tribometer. XPS analysis demonstrated the formation of protective layer induced by AO. The wear resistance of polyimide after modification was enhanced under AO attack. FIB-TEM confirmed that the inert protective layer of Si was formed on the counterpart during the sliding process. Mechanisms behind this are discussed based on the systematic characterization of worn surfaces of the samples and the tribofilms formed on the counterbody.

Synergistic effects of atomic oxygen and thermal cycling in low earth orbit on polymer-matrixed space material.

Polymer-matrixed materials are widely used in the spacecrafts' structures. However, crafts located in the LEO（Low Earth Orbit） would suffer from hazardous environment factors when orbiting in the space. It has been reported that the space environment factors' integral effect (which represents the factual detriment in space) is not equivalent to the simple summation of each individual. Hence, atomic oxygen and thermal cycling were selected as the starting point for studying the typical LEO synergistic effects on polymer-matrixed space material. In this work, methods such as surface morphology observation, surface components analyzation and inter-laminar-shear strength test were embraced to gather the basic information for the study of degradation. As a result, focusing on the composites selected in this work, synergistic effects do exist between the two factors (AO&TC, representing for atomic oxygen and thermal cycling combined). Besides, a quantified index was proposed to represent synergistic characteristics，so as to lay the foundation for the scientific evolution of material characterization.

UV-Induced Synthesis of Hybrid HMDSO/SiO2 Thin Films with Compositional Gradients for High-Performance Atomic Oxygen Resistance.

A flexible, dense, defect-free, highly adhesive, and highly dissociation energy-rich protective coating is essential to enhance the atomic oxygen (AO) resistance of polymeric materials in a low Earth orbit (LEO). In this work, a dense, defect-free hybrid HMDSO/SiO2 thin film coating with compositional gradients on the surface of polyimide was synthesized using vacuum-ultraviolet (VUV) irradiation. The effects of VUV irradiation on the morphology, optical transmittance, and chemical components of plasma-polymerized HMDSO (pp-HMDSO) thin-film coatings deposited on the polyimide surface were investigated in depth. There were no defects such as cracks and holes in the surface morphology of pp-HMDSO films after VUV irradiation, but the surface roughness increased slightly, and the corresponding optical transmittance decreased slightly. The chemical components of pp-HMDSO films were changed in the depth direction starting from the top of the surface, forming hybrid HMDSO/SiO2 thin films with compositional gradients. The component gradient HMDSO/SiO2 composite coating further enhanced the atomic oxygen resistance of the polyimide due to the surface layer of the UV-modified coating enriched with high dissociation energy SiOx material. Therefore, this work provides a facile UV-induced synthesis method to prepare dense, defect-free, and highly dissociation energy-rich protective gradient coatings, which are promising not only for excellent AO protection in LEO but also for potential application in water-oxygen barrier films.

Generating a Sustained Oxygen-Stable Atomic Concentration in a High-Temperature Gas Effect Investigation.

Modulated laser absorption spectroscopy is an ideal technique for evaluating flow-field parameters and determining flow-field quality by measuring the atoms dissociated in high-temperature environments. However, to obtain the absolute number density of atoms in the flow field, it is necessary to compare the measured modulated absorption spectroscopy signal with a known atomic concentration and establish a quantitative relationship through concentration calibration. Nevertheless, it remains a challenging task to prepare transient atomic samples with known concentrations that meet the calibration requirements. This study utilized the alternating-current glow discharge technique to dissociate oxygen in the air flow, resulting in the continuous generation of oxygen atoms. The absolute number densities of the generated oxygen atoms were determined by measuring the direct absorption spectra of centered on 777 nm for oxygen atoms. The number densities of the generated atoms were finely tuned by adjusting the discharge parameters. Throughout the 120-min continuous operation of the discharge system, the concentration of excited-state oxygen atoms remained stable within the range of (2.51 ± 0.02) × 108 cm-3, demonstrating the remarkable stability of the transient atomic concentration generated by the glow discharge plasma. This observation suggests that the generated atoms can be utilized as a standardized atomic sample of known concentration for absolute concentration calibration purposes.