Characterization of the rainbow trout (Oncorhynchus mykiss) mucosal glycosphingolipid repertoire and Aeromonas salmonicida binding to neutral glycosphingolipids.

Infections pose a challenge for the fast growing aquaculture sector. Glycosphingolipids are cell membrane components that pathogens utilize for attachment to the host to initiate infection. Here, we characterized rainbow trout glycosphingolipids from five mucosal tissues using mass spectrometry and nuclear magnetic resonance and investigated binding of radiolabeled Aeromonas salmonicida to the glycosphingolipids on thin-layer chromatograms. 12 neutral and 14 acidic glycosphingolipids were identified. The glycosphingolipids isolated from the stomach and intestine were mainly neutral, whereas glycosphingolipids isolated from the skin, gills and pyloric caeca were largely acidic. Many of the acidic structures were poly-sialylated with shorter glycan structures in the skin compared to the other tissues. The sialic acids found were Neu5Ac and Neu5Gc. Most of the glycosphingolipids had isoglobo and ganglio core chains, or a combination of these. The epitopes on the rainbow trout glycosphingolipid glycans differed between epithelial sites leading to differences in pathogen binding. A major terminal epitope was fucose, that occurred attached to GalNAc in a α1-3 linkage but also in the form of HexNAc-(Fuc-)HexNAc-R. A. salmonicida were shown to bind to neutral glycosphingolipids from the gill and intestine. This study is the first to do a comprehensive investigation of the rainbow trout glycosphingolipids and analyze binding of A. salmonicida to glycosphingolipids. The structural information paves the way for identification of ways of interfering in pathogen colonization processes to protect against infections in aquaculture and contributes towards understanding A. salmonicida infection mechanisms.

Effects of flow-induced electromagnetic field and surface roughness on antifouling activity of phenolic compounds.

Microbial fouling involves the physicochemical interactions between microorganisms and solid surfaces. An electromagnetic field (EMF) may change the diffusion rates of microbial cells and the electrical double layer around the cells and contacting surfaces. In the current study, polycardanol exhibiting antibiofouling activity was modified with ferromagnetic iron oxide (IO) to investigate the EMF effects on bacterial adhesion. When there was a flow of electrolyte that contained bacterial cells, flow-induced EMF was generated according to Faraday's principle. It was observed that the IO-ionic solution (IS)-modified surfaces, with an induced current of 44, 53, 66 nA, showed decreases in the adhesion of bacteria cells more than the unmodified (polycardanol) and IO-nanoparticles-modified ones. In addition to the EMF effects, the nano-scale uniform roughness of the modified surfaces appeared to play an important role in the reduction of cell adhesion. The results demonstrated that the IOIS-modified surface (3.2 × 10-6 mM IO) had the highest antibiofouling activity.

The effect of laser therapy for the treatment of dentin hypersensitivity on surface roughness and bacterial adhesion.

The aim of the study was to measure the degree of dentine surface roughness caused by five distinct lasers used to treat dentine hypersensitivity, as well as to evaluate the subsequent bacterial colonization on these irradiated surfaces. Sixty human maxillary premolar teeth without caries or restoration which were extracted for periodontal reasons were used in this study. Five different types of lasers were applied to the root dentin surface. Tested samples were divided into six groups of 10 samples each; control, diode (810 nm), diode (980 nm), Nd: YAG, Er: YAG, and Er, Cr: YSGG laser groups. The arithmetic mean of the surface roughness values (Ra) and the average roughness over a measurement area (Sa) were measured pre- and post-application using any of the laser types. Swab samples were then collected from the dentin surface. Following a 24-hour incubation period at 37 °C, the colony forming units were counted using a stereoscope. The results demonstrated a statistically significant difference in the surface roughness values pre- and post-application (Ra and Sa, respectively) in the Er, Cr: YSGG laser group (p = 0.037,p = 0.007). No significant difference was observed in the other groups (p > 0.05). There was no statistically significant difference in the number of bacterial colonies observed between the test and control groups. Diode and Nd: YAG lasers showed either a decrease or no change in surface roughness; however, the hard tissue lasers (Er: YAG, Er, Cr: YSGG) showed an increase. The Er: YAG and Nd: YAG laser groups exhibited decreased bacterial adhesion compared to the other groups.

The MATH test. A three-phase assay?

This study aimed to investigating the possible interference caused by glass test tubes on the quantification of bacterial adhesion to hydrocarbons by the MATH test. The adhesion of four bacteria to hexadecane and to glass test tubes was evaluated employing different suspending polar phases. The role of the ionic strength of the polar phase regarding adhesion to glassware was investigated. Within the conditions studied, Gram-positive bacteria adhered to both the test tube and the hydrocarbon regardless of the polar phase employed; meanwhile, Escherichia coli ATCC 25922 did not attach to either one. The capacity of the studied microorganisms to adhere to glassware was associated with their electron-donor properties. The ionic strength of the suspending media altered the patterns of adhesion to glass in a strain-specific manner by defining the magnitude of electrostatic repulsion observed between bacteria and the glass surface. This research demonstrated that glass test tubes may interact with suspended bacterial cells during the MATH test under specific conditions, which may lead to overestimating the percentage of adhesion to hydrocarbons and, thus, to erroneous values of cell surface hydrophobicity.

The Critical Role of Intracellular Bacterial Communities in Uncomplicated Recurrent Urinary Cystitis: A Comprehensive Review of Detection Methods and Diagnostic Potential.

Urinary tract infections (UTIs) are among the most common bacterial infections worldwide and are particularly prevalent in women. Recurrent UTIs significantly diminish quality of life due to their symptoms and frequent relapses. Patients often experience immediate relapse following slightly strenuous activities or intense psychological stress. In this review, we explore why infections persist despite the advent of various treatments and suggest strategies to manage recurrent cystitis by targeting the mechanisms of adhesion and infection. Vitamin D levels and the expression of neutrophil gelatinase-associated lipocalin are linked to the recurrence of UTIs. During a UTI, bacteria employ adhesins to invade the urinary tract, adhere to urothelial cells, and then penetrate these cells, where they rapidly multiply to establish intracellular bacterial communities. Bacteria can also form quiescent intracellular reservoirs that escape immune responses and antibiotic treatments, leading to recurrence under certain conditions. The surface proteins of bacteria and D-mannose are crucial in the adhesion of bacteria to the urothelium. Understanding these processes provides valuable insights into potential therapeutic approaches that focus on preventing bacterial attachment and cluster formation. By disrupting the ability of bacteria to adhere to and form clusters on cells, we can better manage recurrent UTIs and improve patient outcomes.

Evaluation of surface energy and surface stability and adherence of Candida albicans to octa fluoro pentyl (meth) acrylate-coated PEEK using plasma spray.

Background: Polyetheretherketone (PEEK) has favorable properties that make it able to be used as a denture base material, but it is also susceptible to the adhesion of microorganisms. In this study, we applied Octafluoropentyl (meth) acrylate (OFPA) coating on the PEEK polymer surface by using plasma spray and investigated the functional groups present on the surface, changes in the surface energy and Candida albicans adhesion. Materials and Methods: In this experimental study, the samples were placed in a control group without surface preparation and three experimental groups that were subjected to plasma spray for 10, 30, and 60 s and then impregnated with degassed Octa fluoropentyl (meth) acrylate (Sigma-Aldrich, USA) monomer. Fourier transform infrared spectroscopy (FTIR) was used to identify the functional groups and new chemical bonds between PEEK and OFPA, and Sessile Drop Method was used to evaluate the surface's wettability. The surface morphology was checked using a LEXT OLS4000 (Olympus®-Japan) microscope, and the inhibition of C. albicans adhesion was also checked by counting the colonies in terms of colony forming unit/mL (CFU/mL). Kurskal-Wallis analysis was conducted to assess Candida adhesion, while wettability was evaluated using analysis of variance and post hoc analyses. The level of statistical significance was set at P < 0.05. Results: FTIR analysis confirmed that a chemical between OFPA and PEEK was established. The samples showed a significant increase in the contact angle after 30 s of plasma application (CA = 88.2 ± 7.3). The contact angle decreased again by increasing the surface modification to 60 s (CA = 64.33 ± 5.5). Examining the surface morphology of the samples shows an increase in surface roughness with increasing plasma time up to 60 s. The number of adherent colonies was the lowest in 30 s group, but it was not statistically significant (P = 0.658). Conclusion: No statistically significant difference in C. albicans CFU/mL count was found between groups. The contact angle of the 30 s group was significantly higher than the control group.

TiO2 nanotubes as an antibacterial nanotextured surface for dental implants: Systematic review and meta-analysis.

OBJECTIVES: Nanotechnology is constantly advancing in dental science, progressing several features aimed at improving dental implants. An alternative for surface treatment of dental implants is electrochemical anodization, which may generate a nanotubular surface (TiO2 nanotubes) with antibacterial potential and osteoinductive features. This systematic review and meta-analysis aims to elucidate the possible antibacterial properties of the surface in question compared to the untreated titanium surface. SOURCES: For that purpose, was performed a systematic search on the bases PubMed, Lilacs, Embase, Web Of Science, Cinahl, and Cochrane Central, as well as, manual searches and gray literature. STUDY SELECTION: The searches resulted in 742 articles, of which 156 followed for full-text reading. Then, 37 were included in the systematic review and 8 were included in meta-analysis. RESULTS: Fifteen studies revealed significant antibacterial protection using TiO2 nanotube surfaces, while 15 studies found no statistical difference between control and nanotextured surfaces. Meta-analysis of in vitro studies demonstrated relevant bacterial reduction only for studies investigating Staphylococcus aureus in a period of 6 h. Meta-analysis of in vivo studies revealed three times lower bacterial adhesion and proliferation on TiO2 nanotube surfaces. CONCLUSIONS: TiO2 nanotube topography as a surface for dental implants in preclinical research has demonstrated a positive relationship with antibacterial properties, nevertheless, factors such as anodization protocols, bacteria strains, and mono-culture methods should be taken into consideration, consequently, further studies are necessary to promote clinical translatability.

Impact of Silicon Carbide Coating and Nanotube Diameter on the Antibacterial Properties of Nanostructured Titanium Surfaces.

This study aimed to comprehensively assess the influence of the nanotube diameter and the presence of a silicon carbide (SiC) coating on microbial proliferation on nanostructured titanium surfaces. An experiment used 72 anodized titanium sheets with varying nanotube diameters of 50 and 100 nm. These sheets were divided into four groups: non-coated 50 nm titanium nanotubes, SiC-coated 50 nm titanium nanotubes, non-coated 100 nm titanium nanotubes, and SiC-coated 100 nm titanium nanotubes, totaling 36 samples per group. P. gingivalis and T. denticola reference strains were used to evaluate microbial proliferation. Samples were assessed over 3 and 7 days using fluorescence microscopy with a live/dead viability kit and scanning electron microscopy (SEM). At the 3-day time point, fluorescence and SEM images revealed a lower density of microorganisms in the 50 nm samples than in the 100 nm samples. However, there was a consistently low density of T. denticola across all the groups. Fluorescence images indicated that most bacteria were viable at this time. By the 7th day, there was a decrease in the microorganism density, except for T. denticola in the non-coated samples. Additionally, more dead bacteria were detected at this later time point. These findings suggest that the titanium nanotube diameter and the presence of the SiC coating influenced bacterial proliferation. The results hinted at a potential antibacterial effect on the 50 nm diameter and the coated surfaces. These insights contribute valuable knowledge to dental implantology, paving the way for developing innovative strategies to enhance the antimicrobial properties of dental implant materials and mitigate peri-implant infections.

A study on disinfection and adhesion behaviour between bacteria and photocatalytic nanostructures by extended DLVO.

Recently, there has been a growing concern regarding the increased contamination of water by bacteria. As a result, more attention has been paid to the potential benefits of utilizing nano adsorbents and photocatalysis for water purification. In order to better manipulate the physicochemical properties, it is crucial to gain a comprehensive understanding of the molecular behaviour between nanoparticles and pathogens. This article investigates the various interactions that can occur between Fe3O4-SiO2-TiO2 (FST) nanoparticles and bacterial cells. Moreover, it explores the impact of the SiO2 mid-layer and the governing interaction in the adhesion and degradation processes. In this regard, FST nanoparticles were prepared, and their adhesion behaviour to E. coli bacterial cells was evaluated using extended DLVO (Derjaguin-Landau-Verwey-Overbeek) theory. The following results revealed that the presence of silica transformed FST into a more hydrophobic material with a positively charged surface, thereby enhancing its affinity for bacterial adsorption. Additionally, SiO2 prevented electron/hole recombination. Amongst the various interactions, Lewis acid-base interactions had the greatest influence on the total energy and lacking energy barriers led to irreversible adhesion. Moreover, the presence of an increased number of ·OH groups on the surface resulted in enhanced bactericidal properties of FST, leading to severe damage of E. coli cells through the formation of a greater number of hydrogen bonds on the bacterial surface, which is the basis of the proposed mechanism for destruction of the bacterial structure.

New strontium-based coatings show activity against pathogenic bacteria in spine infection.

Infections of implants and prostheses represent relevant complications associated with the implantation of biomedical devices in spine surgery. Indeed, due to the length of the surgical procedures and the need to implant invasive devices, infections have high incidence, interfere with osseointegration, and are becoming increasingly difficult to threat with common therapies due to the acquisition of antibiotic resistance genes by pathogenic bacteria. The application of metal-substituted tricalcium phosphate coatings onto the biomedical devices is a promising strategy to simultaneously prevent bacterial infections and promote osseointegration/osseoinduction. Strontium-substituted tricalcium phosphate (Sr-TCP) is known to be an encouraging formulation with osseoinductive properties, but its antimicrobial potential is still unexplored. To this end, novel Sr-TCP coatings were manufactured by Ionized Jet Deposition technology and characterized for their physiochemical and morphological properties, cytotoxicity, and bioactivity against Escherichia coli ATCC 8739 and Staphylococcus aureus ATCC 6538P human pathogenic strains. The coatings are nanostructured, as they are composed by aggregates with diameters from 90 nm up to 1 µm, and their morphology depends significantly on the deposition time. The Sr-TCP coatings did not exhibit any cytotoxic effects on human cell lines and provided an inhibitory effect on the planktonic growth of E. coli and S. aureus strains after 8 h of incubation. Furthermore, bacterial adhesion (after 4 h of exposure) and biofilm formation (after 24 h of cell growth) were significantly reduced when the strains were cultured on Sr-TCP compared to tricalcium phosphate only coatings. On Sr-TCP coatings, E. coli and S. aureus cells lost their organization in a biofilm-like structure and showed morphological alterations due to the toxic effect of the metal. These results demonstrate the stability and anti-adhesion/antibiofilm properties of IJD-manufactured Sr-TCP coatings, which represent potential candidates for future applications to prevent prostheses infections and to promote osteointegration/osteoinduction.

Visible light-induced photocatalytic and antibacterial adhesion properties of superhydrophilic TiO2 nanoparticles.

Bacterial infections triggered by patient or healthcare worker contact with surfaces are a major cause of medically acquired infections. By controlling the kinetics of tetrabutyl titanate hydrolysis and condensation during the sol-gel process, it is possible to regulate the content of Ti3+ and oxygen vacancies (OVs) in TiO2, and adjust the associated visible light-induced photocatalytic performance and anti-bacterial adhesion properties. The results have shown that the Ti3+ content in TiO2 was 9.87% at the calcination temperature of the reaction system was 300 °C and pH was 1.0, corresponding to optimal photocatalytic and hydrophilic properties. The formation of a hydrated layer on the superhydrophilic surface provided resistance to bacterial adhesion, preventing cross-contamination on high-touch surfaces. The excellent photocatalytic self-cleaning performance and anti-bacterial adhesion properties can be attributed to synergistic effects associated with the high specific surface area of TiO2 nanoparticles, the mesoporous structure, and the presence of Ti3+ and OVs. The formation of superhydrophilic self-cleaning surfaces under visible light can serve as the basis for the development of a new class of anti-bacterial adhesion materials.

Effect of mutanase and dextranase on biofilms of cariogenic bacteria: A systematic review of in vitro studies.

Matrix-degrading enzymes are promising non-biocidal adjuncts to dental biofilm control and caries prevention. By disrupting the biofilm matrix structure, enzymes may prevent biofilm formation or disperse established biofilms without compromising the microbial homeostasis in the mouth. This study reviewed whether treatment with mutanase and/or dextranase inhibits cariogenic biofilm growth and/or removes cariogenic biofilms in vitro. An electronic search was conducted in PubMed, EMBASE, Scopus, Web of Science, Cochrane, and LIVIVO databases. Manual searches were performed to identify additional records. Studies that quantitatively measured the effect of mutanase and/or dextranase on the inhibition/removal of in vitro cariogenic biofilms were considered eligible for inclusion. Out of 809 screened records, 34 articles investigating the effect of dextranase (n = 23), mutanase (n = 10), and/or combined enzyme treatment (n = 7) were included in the review. The overall risk of bias of the included studies was moderate. Most investigations used simple biofilm models based on one or few bacterial species and employed treatment times ≥30 min. The current evidence suggests that mutanase and dextranase, applied as single or combined treatment, are able to both inhibit and remove in vitro cariogenic biofilms. The pooled data indicate that enzymes are more effective for biofilm inhibition than removal, and an overall higher effect of mutanase compared to dextranase was observed.

Comprehensive Evaluation of Novel Biomaterials for Dental Implant Surfaces: An In Vitro Comparative Study.

BACKGROUND: Dental implantology is continually evolving in its quest to discover new biomaterials to improve dental implant success rates. The study explored the potential of innovative biomaterials for dental implant surfaces, including titanium-zirconium (Ti-Zr) alloy, hydroxyapatite-coated titanium (HA-Ti), and porous polyetheretherketone (PEEK), in comparison to conventional commercially pure titanium (CP Ti). MATERIALS AND METHODS: A total of 186 samples were harvested for the analysis. Biomaterials were thoroughly evaluated in terms of surface topography, chemical composition, biocompatibility, mechanical properties, osseointegration performance, and bacterial adhesion. Study methods and techniques included scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), cell culture variants, tensile tests, hardness measurements, histological analysis, and microbiological testing. RESULTS: Surface topography examination showed significant disparities between the biomaterials: Ti-Zr had a better roughness of 1.23 µm, while HA-Ti demonstrated a smoother surface at 0.98 µm. Chemical composition evaluation indicated the presence of a Ti-Zr alloy in Ti-Zr, calcium-phosphorus richness in HA-Ti, and high titanium amounts in CP Ti. The mechanical properties assessment showed that Ti-Zr and CP Ti had good tensile strengths of 750 MPa and 320 HV. In addition, bacterial adhesion tests showed low propensities for Ti-Zr and HA-Ti at 1200 and 800 cfu/cm2, respectively. CONCLUSION: Ti-Zr and HA-Ti performed better than the other biomaterials in surface topography and mechanical properties and against bacterial adhesion. This study emphasizes that multi-parameter analysis is critical for clinical decision-making, allowing for the selection of the currently available biomaterial, which could be conducive to the long-term success of the implant.

The strongest protein binder is surprisingly labile.

Bacterial adhesins are cell-surface proteins that anchor to the cell wall of the host. The first stage of infection involves the specific attachment to fibrinogen (Fg), a protein found in human blood. This attachment allows bacteria to colonize tissues causing diseases such as endocarditis. The study of this family of proteins is hence essential to develop new strategies to fight bacterial infections. In the case of the Gram-positive bacterium Staphylococcus aureus, there exists a class of adhesins known as microbial surface components recognizing adhesive matrix molecules (MSCRAMMs). Here, we focus on one of them, the clumping factor A (ClfA), which has been found to bind Fg through the dock-lock-latch mechanism. Interestingly, it has recently been discovered that MSCRAMM proteins employ a catch-bond to withstand forces exceeding 2 nN, making this type of interaction as mechanically strong as a covalent bond. However, it is not known whether this strength is an evolved feature characteristic of the bacterial protein or is typical only of the interaction with its partner. Here, we combine single-molecule force spectroscopy, biophysical binding assays, and molecular simulations to study the intrinsic mechanical strength of ClfA. We find that despite the extremely high forces required to break its interactions with Fg, ClfA is not by itself particularly strong. Integrating the results from both theory and experiments we dissect contributions to the mechanical stability of this protein.

Development of Predictive Modeling for Removal of Multispecies Biofilms of Salmonella Enteritidis, Escherichia coli, and Campylobacter jejuni from Poultry Slaughterhouse Surfaces.

Salmonella Enteritidis, Escherichia coli, and Campylobacter jejuni are among the most common foodborne pathogens worldwide, and poultry products are strongly associated with foodborne pathogen outbreaks. These pathogens are capable of producing biofilms on several surfaces used in the food processing industry, including polyethylene and stainless steel. However, studies on multi-species biofilms are rare. Therefore, this study aimed to develop predictive mathematical models to simulate the adhesion and removal of multispecies biofilms. All combinations of microorganisms resulted in biofilm formation with differences in bacterial counts. E. coli showed the greatest ability to adhere to both surfaces, followed by S. Enteritidis and C. jejuni. The incubation time and temperature did not influence adhesion. Biofilm removal was effective with citric acid and benzalkonium chloride but not with rhamnolipid. Among the generated models, 46 presented a significant coefficient of determination (R2), with the highest R2 being 0.88. These results provide support for the poultry industry in creating biofilm control and eradication programs to avoid the risk of contamination of poultry meat.

Nanoscale Spatiotemporal Dynamics of Microbial Adhesion: Unveiling Stepwise Transitions with Plasmonic Imaging.

Understanding bacterial adhesion at the nanoscale is crucial for elucidating biofilm formation, enhancing biosensor performance, and designing advanced biomaterials. However, the dynamics of the critical transition from reversible to irreversible adhesion has remained elusive due to analytical constraints. Here, we probed this adhesion transition, unveiling nanoscale, step-like bacterial approaches to substrates using a plasmonic imaging technique. This method reveals the discontinuous nature of adhesion, emphasizing the complex interplay between bacterial extracellular polymeric substances (EPS) and substrates. Our findings not only deepen our understanding of bacterial adhesion but also have significant implications for the development of theoretical models for biofilm management. By elucidating these nanoscale step-like adhesion processes, our work provides avenues for the application of nanotechnology in biosensing, biofilm control, and the creation of biomimetic materials.

Enhancing antibacterial properties of titanium implants through a novel Ag-TiO2-OTS nanocomposite coating: a comprehensive study on resist-killing-disintegrate approach.

Titanium (Ti) implants are widely used in orthopedic and dental applications due to their excellent biocompatibility and mechanical properties. However, bacterial adhesion and subsequent biofilm formation on implant surfaces pose a significant risk of postoperative infections and complications. Conventional surface modifications often lack long-lasting antibacterial efficacy, necessitating the development of novel coatings with enhanced antimicrobial properties. This study aims to develop a novel Ag-TiO2-OTS (Silver-Titanium dioxide-Octadecyltrichlorosilane, ATO) nanocomposite coating, through a chemical plating method. By employing a 'resist-killing-disintegrate' approach, the coating is designed to inhibit bacterial adhesion effectively, and facilitate pollutant removal with lasting effects. Characterization of the coatings was performed using spectroscopy, electron microscopy, and contact angle analysis. Antibacterial efficacy, quantitatively evaluated against E. coli and S. aureus over 168 h, showed a significant reduction in bacterial adhesion by 76.6% and 66.5% respectively, and bacterial removal rates were up to 83.8% and 73.3% in comparison to uncoated Ti-base material. Additionally, antibacterial assays indicated that the ratio of the Lifshitz-van der Waals apolar component to electron donor surface energy components significantly influences bacterial adhesion and removal, underscoring a tunable parameter for optimizing antibacterial surfaces. Biocompatibility assessments with the L929 cell line revealed that the ATO coatings exhibited excellent biocompatibility, with minimal cytotoxicity and no significant impact on cell proliferation or apoptosis. The ATO coatings provided a multi-functionality surface that not only resists bacterial colonization but also possesses self-cleaning capabilities, thereby marking a substantial advancement in the development of antibacterial coatings for medical implants.

Magnetic Hydroxyapatite-Coated Iron-Chromium Microspheres for Dental Surface Polishing and Plaque Removal.

This research aimed to engineer magnetic hydroxyapatite-coated iron-chromium (HAp-FeCr) microspheres to enhance dental surface polishing and plaque elimination. Utilizing a tailored sol-gel approach, the HAp-FeCr microspheres were synthesized and exhaustively characterized via scanning electron microscopy, energy-dispersive X-ray spectroscopy, ζ-potential, X-ray diffractometry, and X-ray photoelectron spectroscopy methodologies. Key findings showcased that these microspheres retained their magnetic properties post-HAp coating, as evidenced by the magnetization curves. An innovative magnetic polishing system was developed, incorporating these microspheres and a 2000 rpm magnet. Comparative evaluations between traditional air-powder polishing and the proposed magnetic technique demonstrated the latter's superiority. Notably, the magnetic polishing led to a substantial reduction in dental plaque on the tooth surface, decreasing bacterial adhesion and early biofilm formation by Streptococcus gordonii and Lactobacillus acidophilus, where the most pronounced effects were observed in samples with elevated HAp content. A significant 60% reduction in dental plaque was achieved with the magnetic method relative to air-powder polishing. Furthermore, the HAp-FeCr microspheres' biocompatibility was verified through cytotoxicity tests and animal studies. In essence, the magnetic HAp-FeCr microspheres present a novel and efficient strategy for dental treatments, holding immense potential for improving oral health.

The Role of Cyanoacrylate after Mandibular Third Molar Surgery: A Single Center Study.

BACKGROUND: The management of the surgical wound of partially impacted mandibular third molar surgery has a great impact on recovery as well as on food impact retention. The present study used clinical parameters and health-related quality of life (HRQL) to compare outcomes of cyanoacrylate application versus traditional suture of third molar impaction surgery. METHODS: This was a retrospective observational study of subjects scheduled for outpatient third molar surgery. Each participant signed an informed consent agreement. Inclusion criteria were as follows: presence of at least one partially impacted mandibular third molar, confirmed with a preoperative panoramic radiograph. Exclusion criteria were the following: smoking, diagnosed diabetes mellitus. Between June 2020 and September 2023, a total of 78 patients of mean age 31.14 years old (range 21-40 years, standard deviation 9.14), were included in this study-38 patients were male, 40 patients were female. A group of patients received traditional silk suture (G1 = 41 patients), while the second group (G2 = 37 patients) received hemostasis performed with fibrin sponge and, after complete soaking of the sponge, the application of cyanoacrylate gel on the blood clot and suture with one 2/0 stitch in order for recovery for secondary closure. The following parameters were measured: HRQL, average pain (AP), maximum pain (MP), complication score (CS), facial swelling (FS), and erythema. RESULTS: For HRQL parameters, oral disability was found to be significantly higher in G1 while AP was significantly higher in G2 (p < 0.05). AP was higher in G2 (p = 0.0098), as well as MP (p = 0.001). No differences were found with regards to CS (p = 0.0759). FS and erythema were higher in G1 (p < 0.0001 for facial swelling, and p = 0.0001 for erythema). CONCLUSIONS: on the basis of this study, the use of cyanoacrylate after mandibular third molar surgery appears to be useful in order to reduce postoperative oral disability, facial swelling, and erythema after tooth extraction, with increased average and medium pain: clinicians may consider its use in selected cases.

Caries-Prone Primary Teeth: A Hidden Reason and Prophylactic Treatment in the Viewpoint of Materials Science.

Dental caries, the most prevalent chronic disease across all age groups, has a high prevalence, particularly among children. However, there is no specific and effective treatment for the prevention of caries in primary teeth (Pr.T.), which stems from a lack of knowledge regarding the basic nature of the tooth surface. Herein, we observed that the adhesion energies of the caries-related bacteria Streptococcus mutans and Streptococcus sanguinis to Pr.T were approximately 10 and 5.5 times higher than those to permanent teeth (Pe.T). A lower degree of mineralization and more hydrophilic characteristics of the Pr.T enamel account for this discrepancy. Accordingly, we proposed that the on-target modification of both hydroxyapatite and organic components on Pr.T by dual modification would render a sufficient hydration layer. This resulted in an approximately 11-time decrease in bacterial adhesion energy after treatment. In contrast, a single hydroxyapatite modification on Pe.T and young permanent teeth (Y.Pe.T) was sufficient to achieve a similar effect. Theoretical simulation further verified the rationality of the approach. Our findings may help understand the reason for Pr.T being caries-prone and provide references for treatment using resin restorations. This strategy offers valuable insights into daily oral hygiene and dental prophylactic treatment in children.