Cobalt-Mediated [3+1] Fragmentation of White Phosphorus: Access to Acylcyanophosphanides.

Despite the accessibility of numerous transition metal polyphosphido complexes through transition-metal-mediated activation of white phosphorus, the targeted functionalization of Pn ligands to obtain functional monophosphorus species remains challenging. In this study, we introduce a new [3+1] fragmentation procedure for cyclo-P4 ligands, leading to the discovery of acylcyanophosphanides and -phosphines. Treatment of the complex [K(18c-6)][(Ar*BIAN)Co(η4 -P4 )] ([K(18c-6)]3, 18c-6=[18]crown-6, Ar*=2,6-dibenzhydryl-4-isopropylphenyl, BIAN=1,2-bis(arylimino)acenaphthene diimine) with acyl chlorides results in the formation of acylated tetraphosphido complexes [(Ar*BIAN)Co(η4 -P4 C(O)R)] (R=tBu, Cy, 1-Ad, Ph; 4 a-d). Subsequent reactions of 4 a-d with cyanide salts yield acylated cyanophosphanides [RC(O)PCN]- (9 a-d- ) and the cyclo-P3 cobaltate anion [(Ar*BIAN)Co(η3 -P3 )(CN)]- (8- ). Further reactions of 4 a-d with trimethylsilyl cyanide (Me3 SiCN) and isocyanides provide insight into a plausible mechanism of this [3+1] fragmentation reaction, as these reagents partially displace the P4 C(O)R ligand from the cobalt center. Several potential intermediates of the [3+1] fragmentation were characterized. Additionally, the introduction of a second acyl substituent was achieved by treating [K(18c-6)]9b with CyC(O)Cl, resulting in the first bis(acyl)monocyanophosphine (CyC(O))2 PCN (10).

An Insight into nd10 Metal Cyanide-based Coordination Polymers Through ab-initio Calculations: Electronic Properties and Optical Response.

Semiconductors are essential for modern life since they are the basis of many current technologies that are related to better living standards. Some of them, characterized by the periodic assembling of metal cyanides with filled d-shell (nd10 ) constitute an interesting series of cyanide-based coordination polymers with physical properties such like anomalous anisotropic thermal expansion and quantum confinement effects related to the polymer's width that can be exploited for technological applications. Herein, the electronic structure of nd10 metal cyanide-based systems were studied both experimentally and through Density Functional Theory. The band gap found for one-dimensional (1D) -M-C≡N- (M=Cu, Ag, Au) and tetrahedral M-(C≡N)2 (M=Zn, Cd, Hg) systems can be attributed to Laporte-allowed π → ${\to }$ π* (Metal to Ligand Charge Transfer mechanism) combined with metal center (d → ${\to }$ s,p) electronic transitions. Aurophilic bonding was found on the AuCN structure, and a new forbidden electronic transition associated to its band gap is reported. Computed effective and reduced masses from carriers revealed that carrier mobility and quantum confinement effects are greater in 1D systems.

Separation of Palladium from Alkaline Cyanide Solutions through Microemulsion Extraction Using Imidazolium Ionic Liquids.

In this paper, three imidazolium-based ionic liquids, viz., 1-butyl-3-undecyl imidazolium bromide ([BUIm]Br), 1-butyl-3-octyl imidazolium bromide ([BOIm]Br), and 1-butyl-3-hexadecyl imidazolium bromide ([BCIm]Br), were synthesized. Three novel microemulsions systems were constructed and then were used to recover Pd (II) from cyanide media. Key extraction parameters such as the concentration of ionic liquids (ILs), equilibration time, phase ratio (RA/O), and pH were evaluated. The [BUIm]Br/n-heptane/n-pentanol/sodium chloride microemulsion system exhibited a higher extraction percentage of Pd (II) than the [BOIm]Br/n-heptane/n-pentanol/sodium chloride and [BCIm]Br/n-heptane/n-pentanol/sodium chloride microemulsion systems. Under the optimal conditions (equilibrium time of 10 min and pH 10), the extraction percentages of these metals were all higher than 98.5% when using the [BUIm]Br/n-heptane/n-pentanol/sodium chloride microemulsion system. Pd(CN)42- was separated through a two-step stripping procedure, in which Fe (III) and Co (III) were first separated using KCl solution, then Pd(CN)42- was stripped using KSCN solution (separation factors of Pd from Fe and Co exceeded 103). After five extraction-recovery experiments, the recovery of Pd (II) through the microemulsion system remained over 90%. The Pd (II) extraction mechanism of the ionic liquid [BUIm]Br was determined to occur via anion exchange, as shown by spectral analysis (UV, FTIR), Job's method, and DFT calculations. The proposed process has potential applications for the comprehensive treatment of cyanide metallurgical wastewater.

Light-Induced Metal-Free Generation of Cyanocarbenes from Alkynyl Triazenes for the Synthesis of Nitrile Derivatives.

The chemistry of alkynyl triazenes is an emerging field for organic chemists and especially acid-induced nucleophilic functionalizations, either directly, or after a prior reaction towards aromatic triazenes under extrusion of nitrogen, paved the way for fruitful strategies. In contrast, the chemical behavior of alkynyl triazenes upon irradiation with light is still unknown. Herein we present the first photoactivation of alkynyl triazenes that triggers an uncommon reactivity pattern involving the cleavage of the N1-N2 bond of the triazene moiety resulting in a unique approach to cyanocarbenes from a readily available, stable, and insensitive precursor. This allows to access various nitrile compounds without the use of a toxic cyanating agent by exploiting the reactivity pattern of carbenes. By variation of the reaction conditions and light sources, different substitution patterns can be obtained selectively in good yields under mild and metal-free conditions, thus introducing the alkynyl triazene unit as a photo accessible methylene nitrile synthon. Using this synthon, subclasses like α-alkoxynitriles, α-aminonitriles and α-cyanohydrazones become easily available. These exhibit synthetically valuable substitution patterns for the synthesis of pharmaceuticals, intermediates for total synthesis and amino acid synthesis.

Synchronous Switching of Dielectric Constant and Photoluminescence in Cyanidonitridorhenate-Based Crystals.

Switching of multiple physical properties by external stimuli in dynamic materials enables applications in, e.g., smart sensors, biomedical tools, as well as data-storage devices. Among stimuli-responsive materials, inorganic-organic molecular hybrids exhibiting thermal order-disorder phase transitions were tested as promising molecular switches of electrical characteristics, including dielectric constant. We aimed at broadening the multifunctional potential of such hybrid materials towards the switching of not only electrical but also other physical properties, e.g., light emission. We report two ionic salts based on luminescent tetracyanidonitridorhenate(V) anions bearing two different diamine ligands, 1,2-diaminoethane (1) and 1,3-diaminopropane (2), both crystallizing with polar N-methyl-dabconium cations. They exhibit an order-disorder phase transition related to the heating-induced turning-on of the rotation of polar cations. This leads to a unique synchronous switching of the dielectric constant as well as metal-complex-centered photoluminescence, as demonstrated by changes in, e.g., emission lifetime. The roles of organic cations, non-trivial Re(V) complexes, and their interaction in achieving the coupled thermal switching of electrical and optical properties are discussed utilizing experimental and theoretical approaches.

Molecular Magnetic Materials Based on {CoIII (Tp*)(CN)3 }- Cyanidometallate: Combined Magnetic, Structural and 59 Co NMR Study.

The cyanidocobaltate of formula fac-PPh4 [CoIII (Me2 Tp)(CN)3 ] ⋅ CH3 CN (1) has been used as a metalloligand to prepare polynuclear magnetic complexes (Me2 Tp=hydrotris(3,5-dimethylpyrazol-1-yl)borate). The association of 1 with in situ prepared [FeII (bik)2 (MeCN)2 ](OTf)2 (bik=bis(1-methylimidazol-2-yl)ketone) leads to a molecular square of formula {[CoIII {(Me2 Tp)}(CN)3 ]2 [FeII (bik)2 ]2 }(OTf)2 ⋅ 4MeCN ⋅ 2H2 O (2), whereas the self-assembly of 1 with preformed cluster [CoII 2 (OH2 )(piv)4 (Hpiv)4 ] in MeCN leads to the two-dimensional network of formula {[CoII 2 (piv)3 ]2 [CoIII (Me2 Tp)(CN)3 ]2 ⋅ 2CH3 CN}∞ (3). These compounds were structurally characterized via single crystal X-ray analysis and their spectroscopic (FTIR, UV-Vis and 59 Co NMR) properties and magnetic behaviours were also investigated. Bulk magnetic susceptibility measurements reveal that 1 is diamagnetic and 3 is paramagnetic throughout the explored temperature range, whereas 2 exhibits sharp spin transition centered at ca. 292 K. Compound 2 also exhibits photomagnetic effects at low temperature, selective light irradiations allowing to promote reversibly and repeatedly low-spin⇔high-spin conversion. Besides, the diamagnetic nature of the Co(III) building block allows us studying these compounds by means of 59 Co NMR spectroscopy. Herein, a 59 Co chemical shift has been used as a magnetic probe to corroborate experimental magnetic data obtained from bulk magnetic susceptibility measurements. An influence of the magnetic state of the neighbouring atoms is observed on the 59 Co NMR signals. Moreover, for the very first time, 59 Co NMR technique has been successfully introduced to investigate molecular materials with distinct magnetic properties.

Evaluation of interactions in chemical mixtures containing cyanides.

Cyanides are highly toxic chemicals found indoors and outdoors, in air, water, and soil. Environmental exposures often are to mixtures of cyanides with other environmental pollutants. Interactive toxicology is the study of the toxicity of a chemical when it occurs with other chemicals or stressors. Such interactions can modify the joint toxicity of a given mixture. Several binary mixtures of cyanides have been studied in humans and animals to develop antidotes, and their mechanism of action is well understood. We used this limited binary weight of evidence to evaluate the toxicity of untested mixtures, extended it, and applied it to complex environmental mixtures to advance methods for joint toxicity assessment. Federal agencies and local entities provide guidance to evaluate such exposures in the absence of specific data. The objective of this paper is to illustrate use and applicability of ATSDR's framework for evaluation of environmental mixtures, specifically the use of weight of evidence in Tier III, using cyanide mixtures as examples. The results show, for certain cyanide mixtures for which data are available, interactions can be evaluated with a high degree of confidence. For complex mixtures that contain unidentified components, such as found in fires, similarity-based grouping risk assessment is proposed.

The binuclear cluster of [FeFe] hydrogenase is formed with sulfur donated by cysteine of an [Fe(Cys)(CO)2(CN)] organometallic precursor.

The enzyme [FeFe]-hydrogenase (HydA1) contains a unique 6-iron cofactor, the H-cluster, that has unusual ligands to an Fe-Fe binuclear subcluster: CN-, CO, and an azadithiolate (adt) ligand that provides 2 S bridges between the 2 Fe atoms. In cells, the H-cluster is assembled by a collection of 3 maturases: HydE and HydF, whose roles aren't fully understood, and HydG, which has been shown to construct a [Fe(Cys)(CO)2(CN)] organometallic precursor to the binuclear cluster. Here, we report the in vitro assembly of the H-cluster in the absence of HydG, which is functionally replaced by adding a synthetic [Fe(Cys)(CO)2(CN)] carrier in the maturation reaction. The synthetic carrier and the HydG-generated analog exhibit similar infrared spectra. The carrier allows HydG-free maturation to HydA1, whose activity matches that of the native enzyme. Maturation with 13CN-containing carrier affords 13CN-labeled enzyme as verified by electron paramagnetic resonance (EPR)/electron nuclear double-resonance spectra. This synthetic surrogate approach complements existing biochemical strategies and greatly facilitates the understanding of pathways involved in the assembly of the H-cluster. As an immediate demonstration, we clarify that Cys is not the source of the carbon and nitrogen atoms in the adt ligand using pulse EPR to target the magnetic couplings introduced via a 13C3,15N-Cys-labeled synthetic carrier. Parallel mass-spectrometry experiments show that the Cys backbone is converted to pyruvate, consistent with a cysteine role in donating S in forming the adt bridge. This mechanistic scenario is confirmed via maturation with a seleno-Cys carrier to form HydA1-Se, where the incorporation of Se was characterized by extended X-ray absorption fine structure spectroscopy.

The High-Temperature Soft Ferromagnetic Molecular Materials Based on [W(CN)6(bpy)]2-/- System.

The synthesis of molecular materials with magnetic properties, in particular ferromagnetic properties, has been the subject of interest in coordination chemistry for decades. In the last three decades, research has accelerated, as it has emerged that creating bridging systems based on cyanido ligands is a good and relatively simple way to create complex polymer structures exhibiting magnetic properties. Based on many years of personal experience in the field of the synthesis of polycyanido systems, supported by comprehensive structural analysis, a simple method of transforming cyanido complexes into soft ferromagnetic materials with a Curie temperature (TC) higher than the thermal decomposition temperature, usually above 150 °C has been developed. Two soft ferromagnetic materials based on zinc and cadmium hexacyanido salts in the system with [W(CN)6(bpy)]2-/- anions are presented. The crystal structures (X-ray single crystal as well as XRD) of the precursors and the properties of the ferromagnetic materials are discussed. Most importantly, a patented method of synthesizing this type of material, based on which we obtain more than 80 soft, high-temperature ferromagnetic compounds, which proves the wide spectrum of this method, is also presented.

Homochiral Multiferroic Cyanido-Bridged Dimetallic Complexes Assembled by C-F⋠⋠⋠K Interactions.

Cyanido-bridged dimetallic complexes are attracting attention due to their varied structures and properties. However, homochiral cyanido-bridged dimetallic complexes are rare, and making them ferroelectric is a great challenge. Introducing C-F⋅⋅⋅K interactions between the guest chiral cations and the host [KFe(CN)6 ]2- framework, gives three-dimensional cyanido-bridged dimetallic multiferroics, [R- and S-3-fluoropyrrolidinium]2 [KFe(CN)6 ] (R- and S-3-FPC). The mirror-symmetric vibrational circular dichroism (VCD) signal shows their enantiomeric nature. R- and S-3-FPC crystallize in the same chiral-polar space group P21 at 298 K. Piezoresponse force microscopy (PFM), polarizing optical microscopy, and temperature-dependent second-harmonic generation (SHG) measurements show their multiferroic properties (the coexistence of ferroelectricity and ferroelasticity), in line with the Aizu notation of 222F2. R-3-FPC shows excellent ferroelectricity with saturated polarization up to 9.4 µC cm-2 .

Cyanides, Isocyanides, and Hydrides of Zn, Cd and Hg from Metal Atom and HCN Reactions: Matrix Infrared Spectra and Electronic Structure Calculations.

Zinc and cadmium atoms from laser ablation of the metals and mercury atoms ablated from a dental amalgam target react with HCN in excess argon during deposition at 5 K to form the MCN and MNC molecules and CN radicals. UV irradiation decreases the higher energy ZnNC isomer in favor of the lower energy ZnCN product. Cadmium and mercury atoms produce analogous MCN primary molecules. Laser ablation of metals also produces plume radiation which initiates H-atom detachment from HCN. The freed H atom can add to CN radical to produce the HNC isomer. The argon matrix also traps the higher energy but more intensely absorbing isocyanide molecules. Further reactions with H atoms generate HMCN and HMNC hydrides, which can be observed by virtue of their C-N stretches and intense M-H stretches. Computational modeling of IR spectra and relative energies guides the identification of reaction products by providing generally reliable frequency differences within the Zn, Cd and Hg family of products, and estimating isotopic shifts using to 13 C and 15 N isotopic substitution for comparison with experimental data.

Direct Metal-Free Transformation of Alkynes to Nitriles: Computational Evidence for the Precise Reaction Mechanism.

Density functional theory calculations elucidated the precise reaction mechanism for the conversion of diphenylacetylenes into benzonitriles involving the cleavage of the triple C≡C bond, with N-iodosuccinimide (NIS) as an oxidant and trimethylsilyl azide (TMSN3) as a nitrogen donor. The reaction requires six steps with the activation barrier ΔG‡ = 33.5 kcal mol-1 and a highly exergonic reaction free-energy ΔGR = -191.9 kcal mol-1 in MeCN. Reaction profiles agree with several experimental observations, offering evidence for the formation of molecular I2, interpreting the necessity to increase the temperature to finalize the reaction, and revealing thermodynamic aspects allowing higher yields for alkynes with para-electron-donating groups. In addition, the proposed mechanism indicates usefulness of this concept for both internal and terminal alkynes, eliminates the option to replace NIS by its Cl- or Br-analogues, and strongly promotes NaN3 as an alternative to TMSN3. Lastly, our results advise increasing the solvent polarity as another route to advance this metal-free strategy towards more efficient processes.

Facile Synthesis of Cyanide and Isocyanides from CO.

The reaction of K[N(SiMe3 )2 ] with 13 CO proceeds in C6 D6 or THF affording K13 CN and O(SiMe3 )2 under mild conditions as confirmed by crystallographic characterization of K(18-crown-6)CN. Similarly reaction of the alkali metal amides, M[N(SiR3 )R'] (M=Li, K; R=Ph, Me; R'=alkyl, aryl) provides the corresponding 13 C labeled isocyanide RN13 C and MOSiR3 , generally in high yields. In some instances, the use of the sterically bulky Ph3 Si-substituent is required to preclude 1,2-silyl migration affording the silylcarbamoyl salt M[Me3 SiC(O)NR']. These reactions have been used to obtain 19 examples of 13 C labelled isocyanides, and several examples of gram scale reactions are reported. The mechanism of the reactions is probed via reliable DFT calculations.

Guest-Dependent Pressure-Induced Spin Crossover in FeII 4 [MIV (CN)8 ]2 (M=Mo, W) Cluster-Based Material Showing Persistent Solvent-Driven Structural Transformations.

Discrete molecular species that can perform certain functions in response to multiple external stimuli constitute a special class of multifunctional molecular materials called smart molecules. Herein, cyanido-bridged coordination clusters {[FeII (2-pyrpy)2 ]4 [MIV (CN)8 ]2 }⋅4 MeOH⋅6 H2 O (M=Mo (1 solv), M=W (2 solv) and 2-pyrpy=2-(1-pyrazolyl)pyridine are presented, which show persistent solvent driven single-crystal-to-single-crystal transformations upon sorption/desorption of water and methanol molecules. Three full desolvation-resolvation cycles with the concomitant change of the host molecules do not damage the single crystals. More importantly, the Fe4 M2 molecules constitute a unique example where the presence of the guests directly affects the pressure-induced thermal spin crossover (SCO) phenomenon occurring at the FeII centres. The hydrated phases show a partial SCO with approximately two out-of-four FeII centres undergoing a gradual thermal SCO at 1 GPa, while in the anhydrous form the pressure-induced SCO effect is almost quenched with only 15 % of the FeII centres undergoing high-spin to low-spin transition at 1 GPa.

Analysis on thermal behavior of fluorides and cyanides for heat-treating spent cathode carbon blocks from aluminum smelters by TG/DSC-MS & ECSA®.

This paper adopts a novel data-processing method of ECSA® based on TG/DSC-MS system to basically study the characteristics of release and conversion of fluorides and cyanides during heat treatment of the spent cathode carbon block (SCCB). All the experiments were conducted at 10 K⋅min-1 heating rate and under Ar or Ar-O2 atmospheres. The results indicate that the release of fluorides was just a steady but slow phase transition process under both Ar and Ar-O2 atmospheres, which can be comparatively accelerated when the carbon material was burnt. The cyanides were effectively decomposed at high temperature and at Ar-O2 atmosphere, with around three quarters of the cyanides being converted to the N2 and nearly a quarter being to the NO. Finally, analysis on the flue gas composition indicates that it had a more complicated composition of CO2, N2, NO, NO2, HCN under Ar-O2 atmosphere but only had a composition of CO2 and NO under Ar atmosphere.

Access to Heteroleptic Fluorido-Cyanido Complexes with a Large Magnetic Anisotropy by Fluoride Abstraction.

Silicon-mediated fluoride abstraction is demonstrated as a means of generating the first fluorido-cyanido transition metal complexes. This new synthetic approach is exemplified by the synthesis and characterization of the heteroleptic complexes, trans-[MIV F4 (CN)2 ]2- (M=Re, Os), obtained from their homoleptic [MIV F6 ]2- parents. As shown by combined high-field electron paramagnetic resonance spectroscopy and magnetization measurements, the partial substitution of fluoride by cyanide ligands leads to a marked increase in the magnetic anisotropy of trans-[ReF4 (CN)2 ]2- as compared to [ReF6 ]2- , reflecting the severe departure from an ideal octahedral (Oh point group) ligand field. This methodology paves the way toward the realization of new heteroleptic transition metal complexes that may be used as highly anisotropic building-blocks for the design of high-performance molecule-based magnetic materials.

Pressure-Induced Conversion of a Paramagnetic FeCo Complex into a Molecular Magnetic Switch with Tuneable Hysteresis.

A key challenge in the design of magnetic molecular switches is to obtain bistability at room temperature. Here, we show that application of moderate pressure makes it possible to convert a paramagnetic FeIII 2 CoII 2 square complex into a molecular switch exhibiting a full dia- to paramagnetic transition: FeII CoIII ⇔ FeIII CoII . Moreover, the complex follows a rare behavior: the higher the pressure, the broader the magnetic hysteresis. Thus, the application of an adequate pressure allows inducing a magnetic bistability at room temperature with predictable hysteresis width. The structural studies at different pressures suggest that the pressure-enhanced bistability is due to the strengthening of intermolecular interactions upon pressure increase. An original microscopic Ising-like model including pressure effects is developed to simulate this unprecedented behavior. Overall, this study shows that FeCo complexes could be very sensitive piezo switches with potential use as sensors.

Photoinduced Mo-CN Bond Breakage in Octacyanomolybdate Leading to Spin Triplet Trapping.

The photoinduced properties of the octacoordinated complex K4 MoIV (CN)8 ⋅2 H2 O were studied by theoretical calculations, crystallography, and optical and magnetic measurements. The crystal structure recorded at 10 K after blue light irradiation reveals an heptacoordinated Mo(CN)7 species originating from the light-induced cleavage of one Mo-CN bond, concomitant with the photoinduced formation of a paramagnetic signal. When this complex is heated to 70 K, it returns to its original diamagnetic ground state, demonstrating full reversibility. The photomagnetic properties show a partial conversion into a triplet state possessing significant magnetic anisotropy, which is in agreement with theoretical studies. Inspired by these results, we isolated the new compound [K(crypt-222)]3 [MoIV (CN)7 ]⋅3 CH3 CN using a photochemical pathway, confirming that photodissociation leads to a stable heptacyanomolybdate(IV) species in solution.

Isolation and Structural Characterization of Eightfold Protonated Octacyanometalates [M(CNH)8 ]4+ (M=MoIV , WIV ) from Superacids.

Octacyanometalates K4 [Mo(CN)8 ] and K4 [W(CN)8 ] are completely protonated in superacidic mixtures of anhydrous hydrogen fluoride and antimony pentafluoride. The resulting hydrogen isocyanide complexes [Mo(CNH)8 ]4+ [SbF6 ]- 4 and [W(CNH)8 ]4+ [SbF6 ]- 4 are the first examples of eight-coordinate homoleptic metal complexes containing hydrogen isocyanide (CNH) ligands. The complexes were crystallographically characterized, revealing hydrogen-bonded networks with short N⋅⋅⋅H⋅⋅⋅F contacts. Low-temperature NMR measurements in HF confirmed rapid proton exchange even at -40 °C. Upon protonation, ν(C≡N) increases of about 50 cm-1 which is in agreement with DFT calculations.

[Features of obtaining of biological material during emergency incidents with human victims, its referral and forensic chemical examination]. / Osobennosti iz"yatiya, napravleniya i provedeniya sudebno-khimicheskoi ekspertizy biologicheskogo materiala pri chrezvychainykh situatsiyakh s chelovecheskimi zhertvami.

In this article, we consider features of the referral of biological material and assessment of medical and legal chemical researches at emergencies of technogenic character, plane crashes, the fires with the numerous human victims. Practical recommendations on obtaining of biological material for a research on volatile organic compounds, including ethyl alcohol and its metabolites, volatile products of burning, including monoxide of carbon and cyanides are made. Features and the recommended order of conducting judicial and chemical examination at emergencies are designated.