Surface-Diffusion-Induced Amorphization of Pt Nanoparticles over Ru Oxide Boost Acidic Oxygen Evolution.

Phase transformation offers an alternative strategy for the synthesis of nanomaterials with unconventional phases, allowing us to further explore their unique properties and promising applications. Herein, we first observed the amorphization of Pt nanoparticles on the RuO2 surface by in situ scanning transmission electron microscopy. Density functional theory calculations demonstrate the low energy barrier and thermodynamic driving force for Pt atoms transferring from the Pt cluster to the RuO2 surface to form amorphous Pt. Remarkably, the as-synthesized amorphous Pt/RuO2 exhibits 14.2 times enhanced mass activity compared to commercial RuO2 catalysts for the oxygen evolution reaction (OER). Water electrolyzer with amorphous Pt/RuO2 achieves 1.0 A cm-2 at 1.70 V and remains stable at 200 mA cm-2 for over 80 h. The amorphous Pt layer not only optimized the *O binding but also enhanced the antioxidation ability of amorphous Pt/RuO2, thereby boosting the activity and stability for the OER.

Titanium Self-Intercalation Induced Formation of Orthogonal (1 × 1) Edge/Surface Reconstruction in 1T-TiSe2: Atomic Scale Dynamics and Mechanistic Study.

Edges and surfaces play indispensable roles in affecting the chemical-physical properties of materials, particularly in two-dimensional transition metal dichalcogenides (TMDCs) with reduced dimensionality. Herein, we report a novel edge/surface structure in multilayer 1T-TiSe2, i.e., the orthogonal (1 × 1) reconstruction, induced by the self-intercalation of Ti atoms into interlayer octahedral sites of the host TiSe2 at elevated temperature. Formation dynamics of the reconstructed edge/surface are captured at the atomic level by in situ scanning transmission electron microscopy (STEM) and further validated by density functional theory (DFT), which enables the proposal of the nucleation mechanism and two growth routes (zigzag and armchair). Via STEM-electron energy loss spectroscopy (STEM-EELS), a chemical shift of 0.6 eV in Ti L3,2 is observed in the reconstructed edge/surface, which is attributed to the change of the coordination number and lattice distortion. The present work provides insights to tailor the atomic/electronic structures and properties of 2D TMDC materials.

Atomic-Level Response of the Domain Walls in Bismuth Ferrite in a Subcoercive-Field Regime.

The atomic-level response of zigzag ferroelectric domain walls (DWs) was investigated with in situ bias scanning transmission electron microscopy (STEM) in a subcoercive-field regime. Atomic-level movement of a single DW was observed. Unexpectedly, the change in the position of the DW, determined from the atomic displacement, did not follow the position of the strain field when the electric field was applied. This can be explained as low mobility defect segregation at the initial DW position, such as ordered clusters of oxygen vacancies. Further, the triangular apex of the zigzag wall is pinned, but it changes its shape and becomes asymmetric under electrical stimuli. This phenomenon is accompanied by strain and bound charge redistribution. We report on unique atomic-scale phenomena at the DW level and show that in situ STEM studies with atomic resolution are very relevant as they complement, and sometimes challenge, the knowledge gained from lower resolution studies.

Structural Anisotropy-Driven Atomic Mechanisms of Phase Transformations in the Pt-Sn System.

Using in situ atomic-resolution scanning transmission electron microscopy, atomic movements and rearrangements associated with diffusive solid to solid phase transformations in the Pt-Sn system are captured to reveal details of the underlying atomistic mechanisms that drive these transformations. In the PtSn4 to PtSn2 phase transformation, a periodic superlattice substructure and a unique intermediate structure precede the nucleation and growth of the PtSn2 phase. At the atomic level, all stages of the transformation are templated by the anisotropic crystal structure of the parent PtSn4 phase. In the case of the PtSn2 to Pt2Sn3 transformation, the anisotropy in the structure of product Pt2Sn3 dictates the path of transformation. Analysis of atomic configurations at the transformation front elucidates the diffusion pathways and lattice distortions required for these phase transformations. Comparison of multiple Pt-Sn phase transformations reveals the structural parameters governing solid to solid phase transformations in this technologically interesting intermetallic system.

Defect-Mediated Growth of Crystallographic Shear Plane.

As representative extended planar defects, crystallographic shear (CS) planes, namely Wadsley defects, play an important role in modifying the physical and chemical properties of metal oxides. Although these special structures have been intensively investigated for high-rate anode materials and catalysts, it is still experimentally unclear how the CS planes form and propagate at the atomic scale. Here, the CS plane evolution in monoclinic WO3 is directly imaged via in situ scanning transmission electron microscope. It is found that the CS planes nucleate preferentially at the edge step defects and proceed by the cooperative migration of WO6 octahedrons along particular crystallographic orientations, passing through a series of intermediate states. The local reconstruction of atomic columns tends to form (102) CS planes featured with four edge-sharing octahedrons in preference to the (103) planes, which matches well with the theoretical calculations. Associated with the structure evolution, the sample undergoes a semiconductor-to-metal transition. In addition, the controlled growth of CS planes and V-shaped CS structures can be achieved by artificial defects for the first time. These findings enable an atomic-scale understanding of CS structure evolution dynamics.

Atomic-scale observations of electrical and mechanical manipulation of topological polar flux closure.

The ability to controllably manipulate complex topological polar configurations such as polar flux-closures via external stimuli may allow the construction of new electromechanical and nanoelectronic devices. Here, using atomically resolved in situ scanning transmission electron microscopy, we find that the polar flux-closures in PbTiO3/SrTiO3 superlattice films are mobile and can be reversibly switched to ordinary single ferroelectric c or a domains under an applied electric field or stress. Specifically, the electric field initially drives movement of a flux-closure via domain wall motion and then breaks it to form intermediate a/c striped domains, whereas mechanical stress first squeezes the core of a flux-closure toward the interface and then form a/c domains with disappearance of the core. After removal of the external stimulus, the flux-closure structure spontaneously recovers. These observations can be precisely reproduced by phase field simulations, which also reveal the evolutions of the competing energies during phase transitions. Such reversible switching between flux-closures and ordinary ferroelectric states provides a foundation for potential electromechanical and nanoelectronic applications.

Atomic-Scale Dynamics at Solid-Liquid Nanointerfaces Induced by Electron-Beam Irradiation.

We report electron-beam induced dynamics at PbS-Pb solid-liquid interfaces. We fabricated PbS-Pb solid-liquid nanointerfaces by heating PbS nanocrystals under vacuum to observe the entire process of structural evolution at the atomic scale. We investigated the dynamics using time-resolved high-angle annular dark-field imaging. Electron-beam irradiation caused layer-by-layer dissolution of PbS at the interface, resulting in the formation of the Pb nanodroplet. Ordered liquid layers were observed adjacent to the interface even under continuous electron-beam irradiation and followed the movement of the interface. Instantaneous epitaxial growth of PbS was observed as a reverse process of the dissolution. The resultant Pb nanodroplet provides indisputable evidence for selective sputtering of sulfur atoms via electron-beam irradiation. This paper demonstrates atomic resolution in situ observations of selective and complete sputtering. The observed dynamics can be explained by the intermittent phase transition via nonequilibrium states of the solid-liquid nanointerface triggered by selective sputtering.

Genesis of Nanogalvanic Corrosion Revealed in Pearlitic Steel.

Nanoscale, localized corrosion underpins billions of dollars in damage and material costs each year; however, the processes responsible have remained elusive due to the complexity of studying degradative material behavior at nanoscale liquid-solid interfaces. Recent improvements to liquid cell scanning/transmission electron microscopy and associated techniques enable this first look at the nanogalvanic corrosion processes underlying this widespread damage. Nanogalvanic corrosion is observed to initiate at the near-surface ferrite/cementite phase interfaces that typify carbon steel. In minutes, the corrosion front delves deeper into the material, claiming a thin layer of ferrite around all exposed phase boundaries before progressing laterally, converting the ferrite to corrosion product normal to each buried cementite grain. Over the following few minutes, the corrosion product that lines each cementite grain undergoes a volumetric expansion, creating a lateral wedging force that mechanically ejects the cementite grains from their grooves and leaves behind percolation channels into the steel substructure.

Dynamics of Anisotropic Oxygen-Ion Migration in Strained Cobaltites.

Orientation control of the oxygen vacancy channel (OVC) is highly desirable for tailoring oxygen diffusion as it serves as a fast transport channel in ion conductors, which is widely exploited in solid-state fuel cells, catalysts, and ion-batteries. Direct observation of oxygen-ion hopping toward preferential vacant sites is a key to clarifying migration pathways. Here we report anisotropic oxygen-ion migration mediated by strain in ultrathin cobaltites via in situ thermal activation in atomic-resolved transmission electron microscopy. Oxygen migration pathways are constructed on the basis of the atomic structure during the OVC switching, which is manifested as the vertical-to-horizontal OVC switching under tensile strain but the horizontal-to-diagonal switching under compression. We evaluate the topotactic structural changes to the OVC, determine the crucial role of the tolerance factor for OVC stability, and establish the strain-dependent phase diagram. Our work provides a practical guide for engineering OVC orientation that is applicable to ionic-oxide electronics.

Atomic Mechanisms of Nanocrystallization via Cluster-Clouds in Solution Studied by Liquid-Phase Scanning Transmission Electron Microscopy.

The formation of nanocrystals is at the heart of various scientific disciplines, but the atomic mechanisms underlying the early stages of crystallization from supersaturated solutions are still rather unclear. Here, we used in situ liquid-phase scanning transmission electron microscopy to study at the atomic level the very early stages of gold nanocrystal growth, and the evolution of its crystallinity. We found that the nucleation is initiated by the formation of poorly crystalline nanoparticles. These are transformed into monocrystals via nanocrystallization governed by a complex process of multiple out-and-in exchanges of matter between a crystalline-core and a disordered-shell, referred to as the cluster-cloud. Our observations at the crystal/cluster-cloud interface during growth demonstrate that the initially formed nanocrystals expel the poorly crystallized phases as nanoclusters into the cluster-cloud, then readsorb it by two distinct pathways, namely, by (i) monomer attachments and (ii) nanocluster coalescence. This growth process eventually leads to the formation of monocrystalline nanoparticles.

Introducing and Controlling Water Vapor in Closed-Cell In Situ Electron Microscopy Gas Reactions.

Protocols for conducting in situ transmission electron microscopy (TEM) reactions using an environmental TEM with dry gases have been well established. However, many important reactions that are relevant to catalysis or high-temperature oxidation occur at atmospheric pressure and are influenced by the presence of water vapor. These experiments necessitate using a closed-cell gas reaction TEM holder. We have developed protocols for introducing and controlling water vapor concentrations in experimental gases from 2% at a full atmosphere to 100% at ~17 Torr, while measuring the gas composition using a residual gas analyzer (RGA) on the return side of the in situ gas reactor holder. Initially, as a model system, cube-shaped MgO crystals were used to help develop the protocols for handling the water vapor injection process and confirming that we could successfully inject water vapor into the gas cell. The interaction of water vapor with MgO triggered surface morphological and chemical changes as a result of the formation of Mg(OH)2, later validated with mass spectra obtained with our RGA system with and without water vapor. Integrating an RGA with an in situ scanning/TEM closed-cell gas reaction system can thus provide critical measurements correlating gas composition with dynamic surface restructuring of materials during reactions.

Three-Dimensional Quantification of the Facet Evolution of Pt Nanoparticles in a Variable Gaseous Environment.

Pt nanoparticles play an essential role in a wide variety of catalytic reactions. The activity of the particles strongly depends on their three-dimensional (3D) structure and exposed facets, as well as on the reactive environment. High-resolution electron microscopy has often been used to characterize nanoparticle catalysts but unfortunately most observations so far have been either performed in vacuum and/or using conventional (2D) in situ microscopy. The latter however does not provide direct 3D morphological information. We have implemented a quantitative methodology to measure variations of the 3D atomic structure of nanoparticles under the flow of a selected gas. We were thereby able to quantify refaceting of Pt nanoparticles with atomic resolution during various oxidation-reduction cycles. In a H2 environment, a more faceted surface morphology of the particles was observed with {100} and {111} planes being dominant. On the other hand, in O2 the percentage of {100} and {111} facets decreased and a significant increase of higher order facets was found, resulting in a more rounded morphology. This methodology opens up new opportunities toward in situ characterization of catalytic nanoparticles because for the first time it enables one to directly measure 3D morphology variations at the atomic scale in a specific gaseous reaction environment.

Facet-Dependent Thermal Instability in LiCoO2.

Thermal runaways triggered by the oxygen release from oxide cathode materials pose a major safety concern for widespread application of lithium ion batteries. Utilizing in situ aberration-corrected scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS) at high temperatures, we show that oxygen release from LixCoO2 cathode crystals is occurring at the surface of particles. We correlated this local oxygen evolution from the LixCoO2 structure with local phase transitions spanning from layered to spinel and then to rock salt structure upon exposure to elevated temperatures. Ab initio molecular dynamics simulations (AIMD) results show that oxygen release is highly dependent on LixCoO2 facet orientation. While the [001] facets are stable at 300 °C, oxygen release is observed from the [012] and [104] facets, where under-coordinated oxygen atoms from the delithiated structures can combine and eventually evolve as O2. The novel understanding that emerges from the present study provides in-depth insights into the thermal runaway mechanism of Li-ion batteries and can assist the design and fabrication of cathode crystals with the most thermally stable facets.

Twin boundary-assisted lithium ion transport.

With the increased need for high-rate Li-ion batteries, it has become apparent that new electrode materials with enhanced Li-ion transport should be designed. Interfaces, such as twin boundaries (TBs), offer new opportunities to navigate the ionic transport within nanoscale materials. Here, we demonstrate the effects of TBs on the Li-ion transport properties in single crystalline SnO2 nanowires. It is shown that the TB-assisted lithiation pathways are remarkably different from the previously reported lithiation behavior in SnO2 nanowires without TBs. Our in situ transmission electron microscopy study combined with direct atomic-scale imaging of the initial lithiation stage of the TB-SnO2 nanowires prove that the lithium ions prefer to intercalate in the vicinity of the (101̅) TB, which acts as conduit for lithium-ion diffusion inside the nanowires. The density functional theory modeling shows that it is energetically preferred for lithium ions to accumulate near the TB compared to perfect neighboring lattice area. These findings may lead to the design of new electrode materials that incorporate TBs as efficient lithium pathways, and eventually, the development of next generation rechargeable batteries that surpass the rate performance of the current commercial Li-ion batteries.

Lithiation-induced shuffling of atomic stacks.

In rechargeable lithium-ion batteries, understanding the atomic-scale mechanism of Li-induced structural evolution occurring at the host electrode materials provides essential knowledge for design of new high performance electrodes. Here, we report a new crystalline-crystalline phase transition mechanism in single-crystal Zn-Sb intermetallic nanowires upon lithiation. Using in situ transmission electron microscopy, we observed that stacks of atomic planes in an intermediate hexagonal (h-)LiZnSb phase are "shuffled" to accommodate the geometrical confinement stress arising from lamellar nanodomains intercalated by lithium ions. Such atomic rearrangement arises from the anisotropic lithium diffusion and is accompanied by appearance of partial dislocations. This transient structure mediates further phase transition from h-LiZnSb to cubic (c-)Li2ZnSb, which is associated with a nearly "zero-strain" coherent interface viewed along the [001]h/[111]c directions. This study provides new mechanistic insights into complex electrochemically driven crystalline-crystalline phase transitions in lithium-ion battery electrodes and represents a noble example of atomic-level structural and interfacial rearrangements.

Photoilluminated Redox-Processed Rh2P Nanoparticles on Photocathodes for Stable Hydrogen Production in Acidic Environments.

While photoelectrochemical (PEC) cells show promise for solar-driven green hydrogen production, exploration of various light-absorbing multilayer coatings has yet to significantly enhance their hydrogen generation efficiency. Acidic conditions can enhance the hydrogen evolution reaction (HER) kinetics and reduce overpotential losses. However, prolonged acidic exposure deactivates noble metal electrocatalysts, hindering their long-term stability. Progress requires addressing catalyst degradation to enable stable, efficient, and acidic PEC cells. Here, we proposed a process design based on the photoilluminated redox deposition (PRoD) approach. We use this to grow crystalline Rh2P nanoparticles (NPs) with a size of 5-10 on 30 nm-thick TiO2, without annealing. Atomically precise reaction control was performed by using several cyclic voltammetry cycles coincident with light irradiation to create a system with optimal catalytic activity. The optimized photocathode, composed of Rh2P/TiO2/Al-ZnO/Cu2O/Sb-Cu2O/ITO, achieved an excellent photocurrent density of 8.2 mA cm-2 at 0 VRHE and a durable water-splitting reaction in a strong acidic solution. Specifically, the Rh2P-loaded photocathode exhibited a 5.3-fold enhancement in mass activity compared to that utilizing just a Rh catalyst. Furthermore, in situ scanning transmission electron microscopy (STEM) was performed to observe the real-time growth process of Rh2P NPs in a liquid cell.

Constructing Sub 10 nm Scale Interfused TiO2/SiOx Bicontinuous Hybrid with Mutual-Stabilizing Effect for Lithium Storage.

TiO2 has been considered as a promising intercalation lithium-ion-battery (LIB) anode material owing to its robust cyclability. However, it suffers from low capacity. Herein, we construct a sub 10 nm scale interfused TiO2/SiOx hybrid with a bicontinuous structure, in which bridged TiO2 nanoparticles (over 80 wt %) are densely packed within a wormlike SiOx network, through the simple oxidation of MAX Ti3SiC2 ceramic. State-of-the-art in situ microscopy characterization unravels a "mutual-stabilizing" effect from the interfused TiO2/SiOx hybrid upon lithiation. That is to say, the two interpenetrated active components restrain the volume expansion of each other with the stress being relieved through abundant interfaces. Meanwhile, the stress generated from one phase functioned as the compressive force on the other phase and vice versa, offsetting the overall volume effect and synergistically reinforcing the structure integrity. Benefiting from the "mutual-stabilizing" effect, the TiO2/SiOx composite manifests a high and stable specific capacity (∼671 mAh g-1 after 580 cycles at 0.1 A g-1) with a low volume expansion of ∼14% even in an extended potential window of 0.01-3.0 V (vs Li+/Li). The concept of mutual-stabilizing effect, in principle, applies to a wide class of interfused bicontinuous hybrids, providing insight into the design of LIB anode materials with high capacity and longevity.

Direct Evidence of Reversible SnO2-Li Reactions in Carbon Nanospaces.

We present herein that carbon nanospaces are the key reaction space to improve the reversibility of the reaction of SnO2 with Li-ions for lithium-ion batteries, demonstrated by both ex situ and in situ observations using high-resolution scanning transmission electron microscopy with electron energy loss spectroscopy. Conversion-type electrode materials, such as SnO2, undergo large volume changes and phase separation during the charge-discharge process, which lead to degradation in the battery performance. By confining the SnO2-Li reaction within carbon nanopores, the battery performance is improved. However, the exact phase changes of SnO2 in the nanospaces are unclear. By directly observing the electrodes during the charge-discharge process, the carbon walls are capable of preventing the expansion of SnO2 particles and minimizing the conversion-induced phase separation of Sn and Li2O on the sub-nanometer scale. Thus, nanoconfinement structures can effectively improve the reversibility performance of conversion-type electrode materials.

Operando Electrochemical Liquid Cell Scanning Transmission Electron Microscopy Investigation of the Growth and Evolution of the Mosaic Solid Electrolyte Interphase for Lithium-Ion Batteries.

The solid electrolyte interphase (SEI) is a key component of a lithium-ion battery forming during the first few dischage/charge cycles at the interface between the anode and the electrolyte. The SEI passivates the anode-electrolyte interface by inhibiting further electrolyte decomposition, extending the battery's cycle life. Insights into SEI growth and evolution in terms of structure and composition remain difficult to access. To unravel the formation of the SEI layer during the first cycles, operando electrochemical liquid cell scanning transmission electron microscopy (ec-LC-STEM) is employed to monitor in real time the nanoscale processes that occur at the anode-electrolyte interface in their native electrolyte environment. The results show that the formation of the SEI layer is not a one-step process but comprises multiple steps. The growth of the SEI is initiated at low potential during the first charge by decomposition of the electrolyte leading to the nucleation of inorganic nanoparticles. Thereafter, the growth continues during subsequent cycles by forming an island-like layer. Eventually, a dense layer is formed with a mosaic structure composed of larger inorganic patches embedded in a matrix of organic compounds. While the mosaic model for the structure of the SEI is generally accepted, our observations document in detail how the complex structure of the SEI is built up during discharge/charge cycling.

In-situ observation of lateral AlAs oxidation and dislocation formation in VCSELs.

Understanding how defects are generated and propagate during operation in modern vertical cavity surface emitting lasers (VCSEL) is an important challenge in order to develop the next generation of highly reliable semiconductor lasers. Undesired oxidation processes or performance degrading dislocation networks are typically investigated by conventional failure analysis after damage formation. In this works new approach to VCSEL failure analysis, oxide confined high power VCSELs are investigated in-situ at elevated temperatures in a transmission electron microscope. At high temperatures, lateral oxidation of the current confinement layer as well as formation and propagation of dislocations are observed. The experimental results may deepen the understanding of defect generation in VCSELs during stress tests or standard operating conditions. On the other hand, in-situ TEM proofed to be a promising technique to be utilised in future VCSEL failure analysis, possibly leading to the development of improved defect models and increased VCSEL reliability.