RESUMO
Optical sensors, with great potential to convert invisible bioanalytical response into readable information, have been envisioned as a powerful platform for biological analysis and early diagnosis of diseases. However, the current extraction of sensing data is basically processed via a series of complicated and time-consuming calibrations between samples and reference, which inevitably introduce extra measurement errors and potentially annihilate small intrinsic responses. Here, we have proposed and experimentally demonstrated a calibration-free sensor for achieving high-precision biosensing detection, based on an optically controlled terahertz (THz) ultrafast metasurface. Photoexcitation of the silicon bridge enables the resonant frequency shifting from 1.385 to 0.825 THz and reaches the maximal phase variation up to 50° at 1.11 THz. The typical environmental measurement errors are completely eliminated in theory by normalizing the Fourier-transformed transmission spectra between ultrashort time delays of 37 ps, resulting in an extremely robust sensing device for monitoring the cancerous process of gastric cells. We believe that our calibration-free sensors with high precision and robust advantages can extend their implementation to study ultrafast biological dynamics and may inspire considerable innovations in the field of medical devices with nondestructive detection.
Assuntos
Neoplasias Gástricas , Humanos , Silício , Neoplasias Gástricas/diagnósticoRESUMO
Dielectric phase gradient metasurfaces have emerged as promising candidates to shrink bulky optical elements to subwavelength thickness scale based on dielectric meta-atoms. These meta-atoms strongly interact with light, thus offering excellent phase manipulation of incident light. However, to fulfill 2π phase control using meta-atoms, the metasurface thickness, to date, is limited to the order of 102 nm. Here, we present the thickness scaling down of phase gradient metasurfaces to <λ/20 by using excitonic van der Waals metasurfaces. High-refractive-index enabled by exciton resonances and symmetry-breaking nanostructures in the patterned layered tungsten disulfide (WS2) corporately enable quasibound states in the continuum in WS2 metasurfaces, which consequently yield complete phase regulation of 2π with the thickness down to 35 nm. To illustrate the concept, we have experimentally demonstrated beam steering, focusing, and holographic display using WS2 metasurfaces. We envision our results unveiling new venues for ultimate thin phase gradient metasurfaces.
RESUMO
Nonlocal metasurfaces, exemplified by resonant waveguide gratings (RWGs), spatially and angularly configure optical wavefronts through narrow-band resonant modes, unlike the broad-band and broad-angle responses of local metasurfaces. However, forward design techniques for RWGs remain constrained at lower efficiency. Here, we present a topology-optimized metasurface resonant waveguide grating (MRWG) composed of titanium dioxide on a glass substrate capable of operating simultaneously at red, yellow, green, and blue wavelengths. Through adjoint-based topology optimization, while considering nonlocal effects, we significantly enhance its diffraction efficiency, achieving numerical efficiencies up to 78% and Q-factors as high as 1362. Experimentally, we demonstrated efficiencies of up to 59% with a Q-factor of 93. Additionally, we applied our topology-optimized metasurface to color selectivity, producing vivid colors at 4 narrow-band wavelengths. Our investigation represents a significant advancement in metasurface technology, with potential applications in see-through optical combiners and augmented reality platforms.
RESUMO
Holography holds tremendous promise in applications such as immersive virtual reality and optical communications. With the emergence of optical metasurfaces, planar optical components that have the remarkable ability to precisely manipulate the amplitude, phase, and polarization of light on the subwavelength scale have expanded the potential applications of holography. However, the realization of metasurface-based full-color vectorial holography remains particularly challenging. Here, we report a general approach utilizing a modified Gerchberg-Saxton algorithm to achieve spatially aligned full-color display and incorporating wavelength information with an image compensation strategy. We combine the Pancharatnam-Berry phase and pairs of exceptional points to address the issue of redundant twin images that generally appear for the two orthogonal circular polarizations and to enable full polarization control of the vectorial field. Our results enable the realization of an asymmetric full-color vectorial meta-hologram, paving the way for the development of full-color display, complex beam generation, and secure data storage applications.
RESUMO
Dynamic access to quasi-bound states in the continuum (q-BICs) offers a highly desired platform for silicon-based active nanophotonic applications, while the prevailing tuning approaches by free carrier injections via an all-optical stimulus are yet limited to THz and infrared ranges and are less effective in visible bands. In this work, we present the realization of active manipulations on q-BICs for nanoscale optical switching in the visible by introducing a local index perturbation through a photothermal mechanism. The sharp q-BIC resonance exhibits an ultrasensitive susceptibility to the complex index perturbation, which can be flexibly fulfilled by optical heating of silicon. Consequently, a mild pump intensity of 1 MW/cm2 can yield a modification of the imaginary part of the refractive index of less than 0.05, which effectively suppresses the sharp q-BIC resonances and renders an active modulation depth of reflectance exceeding 80%. Our research might open up an enabling platform for ultrasensitive dynamic nanophotonic devices.
RESUMO
Circular dichroism (CD) spectroscopy has been extensively utilized for detecting and distinguishing the chirality of diverse substances and structures. However, CD spectroscopy is inherently weak and conventionally associated with chiral sensing, thus constraining its range of applications. Here, we report a DNA-origami-empowered metasurface sensing platform through the collaborative effect of metasurfaces and DNA origami, enabling achiral/slightly chiral sensing with high sensitivity via the enhanced ΔCD. An anapole metasurface, boasting over 60 times the average optical chirality enhancement, was elaborately designed to synergize with reconfigurable DNA origami. We experimentally demonstrated the detection of achiral/slightly chiral DNA linker strands via the enhanced ΔCD of the proposed platform, whose sensitivity was a 10-fold enhancement compared with the platform without metasurfaces. Our work presents a high-sensitivity platform for achiral/slightly chiral sensing through chiral spectroscopy, expanding the capabilities of chiral spectroscopy and inspiring the integration of multifunctional artificial nanostructures across diverse domains.
RESUMO
The operation of photonic devices often relies on modulation of their refractive index. While the sub-bandgap index change through bound-electron optical nonlinearity offers a faster response than utilizing free carriers with an overbandgap pump, optical switching often suffers from inefficiency. Here, we use a recently observed metasurface based on mirror-induced optical bound states in the continuum, to enable superior modulation characteristics. We achieve a pulsewidth-limited switching time of 100 fs, reflectance change of 22%, remarkably low energy consumption of 255 µJ/cm2, and an enhancement of modulation contrast by a factor of 440 compared to unpatterned silicon. Additionally, the narrow photonic resonance facilitates the detection of the dispersive nondegenerate two-photon nonlinearity, allowing tunable pump and probe excitation. These findings are explained by a two-band theoretical model for the dispersive nonlinear index. The demonstrated efficient and rapid switching holds immense potential for applications, including quantum photonics, sensing, and metrology.
RESUMO
Metasurfaces have revolutionized optical technologies by offering powerful, compact, and versatile solutions to control light. Conducting polymers, characterized by their conjugated molecular structures, facilitate charge transport and exhibit interesting electrical, optical, and mechanical properties. Integrating conducting polymers with optical metasurfaces can unlock new opportunities and functionalities in modern optics. In this work, we demonstrate an electrochemically programmable metasurface with independently controlled metasurface pixels at optical frequencies. Electrochemical modulation of locally conjugated polyaniline on gold nanorods, which are arranged on addressable electrodes according to the Pancharatnam-Berry phase design, enables dynamic control over the metasurface pixels into programmable configurations. With the same metasurface device, we showcase diverse optical functions, including dynamic beam diffraction and varifocal lensing along and off the optical axis. The synergy between flat optics and conducting polymer science holds immense potential to enhance the performance and function versatility of metasurfaces, paving the way for innovative optical applications.
RESUMO
Advancements in photonic quantum information systems (QIS) have driven the development of high-brightness, on-demand, and indistinguishable semiconductor epitaxial quantum dots (QDs) as single photon sources. Strain-free, monodisperse, and spatially sparse local-droplet-etched (LDE) QDs have recently been demonstrated as a superior alternative to traditional Stranski-Krastanov QDs. However, integration of LDE QDs into nanophotonic architectures with the ability to scale to many interacting QDs is yet to be demonstrated. We present a potential solution by embedding isolated LDE GaAs QDs within an Al0.4Ga0.6As Huygens' metasurface with spectrally overlapping fundamental electric and magnetic dipolar resonances. We demonstrate for the first time a position- and size-independent, 1 order of magnitude increase in the collection efficiency and emission lifetime control for single-photon emission from LDE QDs embedded within the Huygens' metasurfaces. Our results represent a significant step toward leveraging the advantages of LDE QDs within nanophotonic architectures to meet the scalability demands of photonic QIS.
RESUMO
Accessing mid-infrared radiation is of great importance for a range of applications, including thermal imaging, sensing, and radiative cooling. Here, we study light interaction with hexagonal boron nitride (hBN) nanocavities and reveal strong and tunable resonances across its hyperbolic transition. In addition to conventional phonon-polariton excitations, we demonstrate that the high refractive index of hexagonal boron nitride outside the Reststrahlen band allows enhanced light-matter interactions in deep subwavelength (<λ/15) nanostructures across a broad 7-8 µm range. Emergence and interplay of Fabry-Perot and Mie-like resonances are examined experimentally and theoretically. Near-unity absorption and high quality (Q ≥ 80) resonance interaction in the vicinity of the hBN transverse optical phonon is further observed. Our study provides avenues to design highly efficient and ultracompact structures for controlling mid-infrared radiation and accessing strong light-matter interactions with hBN.
RESUMO
The novel depth-sensing system presented here revolutionizes structured light (SL) technology by employing metasurfaces and photonic crystal surface-emitting lasers (PCSELs) for efficient facial recognition in monocular depth-sensing. Unlike conventional dot projectors relying on diffractive optical elements (DOEs) and collimators, our system projects approximately 45,700 infrared dots from a compact 297-µm-dimention metasurface, drastically more spots (1.43 times) and smaller (233 times) than the DOE-based dot projector in an iPhone. With a measured field-of-view (FOV) of 158° and a 0.611° dot sampling angle, the system is lens-free and lightweight and boasts lower power consumption than vertical-cavity surface-emitting laser (VCSEL) arrays, resulting in a 5-10 times reduction in power. Utilizing a GaAs-based metasurface and a simplified optical architecture, this innovation not only addresses the drawbacks of traditional SL depth-sensing but also opens avenues for compact integration into wearable devices, offering remarkable advantages in size, power efficiency, and potential for widespread adoption.
RESUMO
Ultrafast nonlinearity, which results in modulation of the linear optical response, is a basis for the development of time-varying media, in particular those operating in the epsilon-near-zero (ENZ) regime. Here, we demonstrate that the intraband excitation of hot electrons in the ENZ film results in a second-harmonic resonance shift of â¼10 THz (40 nm) and second-harmonic generation (SHG) intensity changes of >100% with only minor (<1%) changes in linear transmission. The modulation is 10-fold enhanced by a plasmonic metasurface coupled to a film, allowing for ultrafast modulation of circularly polarized SHG. The effect is described by the plasma frequency renormalization in the ENZ material and the modification of the electron damping, with a possible influence of the hot-electron dynamics on the quadratic susceptibility. The results elucidate the nature of the second-order nonlinearity in ENZ materials and pave the way to the rational engineering of active nonlinear metamaterials and metasurfaces for time-varying applications.
RESUMO
The metasurface analogue of electromagnetically induced transparency (EIT) provides a chip-scale platform for achieving light delay and storage, high Q factors, and greatly enhanced optical fields. However, the literature relies on the coupling between localized and localized or localized and collective resonances, limiting the Q factor and related performance. Here, we report a novel approach for realizing collective EIT-like bands with a measured Q factor reaching 2750 in silicon metasurfaces in the near-infrared regime, exceeding the state of the art by more than 5 times. It employs the coupling between two collective resonances, the Mie electric dipole surface lattice resonance (SLR) and the out-of-plane/in-plane electric quadrupole SLR (EQ-SLR). Remarkably, the collective EIT-like resonance can have diverging Q factor and group delay due to the bound state in the continuum characteristics of the in-plane EQ-SLR. With these findings, our study opens a new route for tailoring light flow in metasurfaces.
RESUMO
Fe-based nanostructures have possessed promising properties that make it suitable for chiral sensing and imaging applications owing to their ultra-small size, non-toxicity, biocompatibility, excellent photostability, tunable fluorescence, and water solubility. This review summarizes the recent research progress in the field of Fe-based nanostructures and places special emphases on their applications in chiral sensing and imaging. The synthetic strategies to prepare the targeted Fe-based structures were also introduced. The chiral sensing and imaging applications of the nanostructures are discussed in details.
Assuntos
Nanoestruturas , Pontos Quânticos , Humanos , Pontos Quânticos/química , Nanoestruturas/química , Diagnóstico por Imagem , Fluorescência , SolubilidadeRESUMO
A new generation of an FFP2 (Filtering Face Piece of type 2) smart face mask is achieved by integrating broadband hybrid nanomaterials and a self-assembled optical metasurface. The multifunctional FFP2 face mask shows simultaneously white light-assisted on-demand disinfection properties and versatile biosensing capabilities. These properties are achieved by a powerful combination of white light thermoplasmonic responsive hybrid nanomaterials, which provide excellent photo-thermal disinfection properties, and optical metasurface-based colorimetric biosensors, with a very low limit of pathogens detection. The realized system is studied in optical, morphological, spectroscopic, and cell viability assay experiments and environmental monitoring of harmful pathogens, thus highlighting the extraordinary properties in reusability and pathogens detection of the innovative face mask.
RESUMO
The acoustic coding metasurfaces (ACMs) have the ability to manipulate complex acoustic behavior by reconstructing the coding sequence. In particular, the design of broadband coding enhances the versatility of ACMs. ACMs offer significant advantages over traditional metasurfaces, including a limited number of units and flexible wave control performance. The unit quantity is determined by 2n, with 1-bit utilizing 2 units, 2-bit using 4 units, and 3-bit employing 8 units. Utilizing multiple bits allows for precise control over the phase of sound waves and enables the realization of more intricate acoustic functions. To address the requirements of broadband multi-bit applications, this paper presents the development of novel 3-bit broadband reflected acoustic coding metasurfaces (BACMs) with eight coding units. These metasurfaces are systematically designed using the bottom-up topology optimization method. A constant phase difference of 45° can be achieved across all eight coding units within a broad frequency range. Additionally, the spiral distribution of phase differences enables the construction of an acoustic vortex metasurface. Moreover, by combining the convolution method, the strategies are outlined for constructing vortex-focusing metasurfaces and vortex beam manipulation metasurfaces. These 3-bit coding metasurfaces possess significant potential in the fields of acoustic particle suspension and acoustic communication.
RESUMO
PURPOSE: Ultrahigh field (≥7 T) MRI is at the cutting edge of medical imaging, enabling enhanced spatial and spectral resolution as well as enhanced susceptibility contrast. However, transmit ( B 1 + $$ {\mathrm{B}}_1^{+} $$ ) field inhomogeneity due to standing wave effects caused by the shortened RF wavelengths at 7 T is still a challenge to overcome. Novel hardware methods such as dielectric pads have been shown to improve the B 1 + $$ {\mathrm{B}}_1^{+} $$ field inhomogeneity but are currently limited in their corrective effect by the range of high-permittivity materials available and have a fixed shelf life. In this work, an optimized metasurface design is presented that demonstrates in vivo enhancement of the B 1 + $$ {\mathrm{B}}_1^{+} $$ field. METHODS: A prototype metasurface was optimized by an empirical capacitor sweep and by varying the period size. Phantom temperature experiments were performed to evaluate potential metasurface heating effects during scanning. Lastly, in vivo gradient echo images and B 1 + $$ {\mathrm{B}}_1^{+} $$ maps were acquired on five healthy subjects on a 7 T system. Dielectric pads were also used as a comparison throughout the work as a standard comparison. RESULTS: The metasurfaces presented here enhanced the average relative SNR of the gradient echo images by a factor of 2.26 compared to the dielectric pads factor of 1.61. Average B 1 + $$ {\mathrm{B}}_1^{+} $$ values reflected a similar enhancement of 27.6% with the metasurfaces present versus 8.9% with the dielectric pads. CONCLUSION: The results demonstrate that metasurfaces provide superior performance to dielectric padding as shown by B 1 + $$ {\mathrm{B}}_1^{+} $$ maps reflecting their direct effects and resulting enhancements in image SNR at 7 T.
Assuntos
Desenho de Equipamento , Imageamento por Ressonância Magnética , Imagens de Fantasmas , Imageamento por Ressonância Magnética/instrumentação , Humanos , Perna (Membro)/diagnóstico por imagem , Adulto , Aumento da Imagem/métodos , Feminino , Masculino , Processamento de Imagem Assistida por Computador/métodos , Algoritmos , Razão Sinal-RuídoRESUMO
We present a review outlining the basic mechanism, background, recent technical developments, and clinical applications of aqueous dielectric padding in the field of MRI. Originally meant to be a temporary solution, it has gained traction as an effective method for correcting B1 + inhomogeneities due to the unique properties of the calcium titanate and barium titanate perovskites used. Aqueous dielectric pads have used a variety of high-permittivity materials over the years to improve the quality of MRI acquisitions at 1.5 and 3 T and more recently for 7 T neuroimaging applications. The technical development and assessment of these pads have been advanced by an increased use of mathematical modeling and electromagnetic simulations. These tools have allowed for a more complete understanding of the physical interactions between dielectric pads and the RF coil, making testing and safety assessments more accurate. The ease of use and effectiveness that dielectric pads offer have allowed them to become more commonplace in tackling imaging challenges in more clinically focused environments. More recently, they have seen usage not only in anatomical imaging methods but also in specialized metabolic imaging sequences such as GluCEST and NOEMTR . New colossally high-permittivity materials have been proposed; however, practical utilization has been a continued challenge due to unfavorable frequency dependences as well as safety limitations. A new class of metasurfaces has been under development to address the shortcomings of conventional dielectric padding while also providing increased performance in enhancing MRI images.
Assuntos
Imageamento por Ressonância Magnética , Neuroimagem , Imageamento por Ressonância Magnética/métodos , Neuroimagem/métodos , Água , Ondas de Rádio , Espectroscopia de Ressonância Magnética , Imagens de FantasmasRESUMO
In this work, we investigate the dynamics of Scholte-Stoneley waves (SSWs) travelling along elastic metasurfaces, e.g. thin resonant structures embedding mechanical oscillators, placed at the interface between solid and fluid. To this purpose, an analytical dispersion law, valid in the long-wavelength regime, is derived and used to reveal the hybridization of SSWs with the collective resonance of the mechanical oscillators and the conversion of SSWs into leaky modes within the fluid. The analytical predictions are validated through numerical simulations that include both dispersive and harmonic analysis. Our findings disclose the capabilities of elastic metasurfaces in filtering, trapping and converting SSWs along fluid-solid interfaces, thus supporting the design of novel devices for solid-fluid interaction across various engineering applications, including microfluidics. This article is part of the theme issue 'Current developments in elastic and acoustic metamaterials science (Part 1)'.
RESUMO
Over the past decade, metasurfaces (MTSs) have emerged as a highly promising platform for the development of next-generation, miniaturized, planar devices across a wide spectrum of microwave frequencies. Among their various applications, the concept of MTS-based antennas, particularly those that are based on surface wave excitation, represents a groundbreaking advancement with significant implications for communication technologies. However, existing literature primarily focuses on MTS configurations printed on traditional substrates, largely overlooking the potential benefits of employing photosensitive substrates. This paper endeavors to pioneer this novel path. We present a specialized design of a modulated MTS printed on a silicon substrate, which acts as a photosensitive Ka-band surface wave antenna. Remarkably, the gain of this antenna can be time-modulated, achieving a variance of up to 15 dB, under low-power (below 1 W/cm²) optical illumination at a wavelength of 971 nm. This innovative approach positions the antenna as a direct transducer, capable of converting an optically modulated signal into a microwave-modulated radiated signal, thus offering a new dimension in antenna technology and functionality.