Programmed Ribosomal Frameshifting Generates a Copper Transporter and a Copper Chaperone from the Same Gene.

Metal efflux pumps maintain ion homeostasis in the cell. The functions of the transporters are often supported by chaperone proteins, which scavenge the metal ions from the cytoplasm. Although the copper ion transporter CopA has been known in Escherichia coli, no gene for its chaperone had been identified. We show that the CopA chaperone is expressed in E. coli from the same gene that encodes the transporter. Some ribosomes translating copA undergo programmed frameshifting, terminate translation in the -1 frame, and generate the 70 aa-long polypeptide CopA(Z), which helps cells survive toxic copper concentrations. The high efficiency of frameshifting is achieved by the combined stimulatory action of a "slippery" sequence, an mRNA pseudoknot, and the CopA nascent chain. Similar mRNA elements are not only found in the copA genes of other bacteria but are also present in ATP7B, the human homolog of copA, and direct ribosomal frameshifting in vivo.

Thiosulfinate Tolerance Gene Clusters Are Common Features of Burkholderia Onion Pathogens.

Burkholderia gladioli pv. alliicola, B. cepacia, and B. orbicola are common bacterial pathogens of onion. Onions produce organosulfur thiosulfinate defensive compounds after cellular decompartmentalization. Using whole-genome sequencing and in silico analysis, we identified putative thiosulfinate tolerance gene (TTG) clusters in multiple onion-associated Burkholderia species similar to those characterized in other Allium-associated bacterial endophytes and pathogens. Sequence analysis revealed the presence of three Burkholderia TTG cluster types, with both Type A and Type B being broadly distributed in B. gladioli, B. cepacia, and B. orbicola in both the chromosome and plasmids. Based on isolate natural variation and generation of isogenic strains, we determined the in vitro and in vivo contribution of TTG clusters in B. gladioli, B. cepacia, and B. orbicola. The Burkholderia TTG clusters contributed to enhanced allicin tolerance and improved growth in filtered onion extracts by all three species. TTG clusters also made clear contributions to B. gladioli foliar necrosis symptoms and bacterial populations. Surprisingly, the TTG cluster did not contribute to bacterial populations in onion bulb scales by these three species. Based on our findings, we hypothesize onion-associated Burkholderia may evade or inhibit the production of thiosulfinates in onion bulb tissues. [Formula: see text] Copyright © 2024 The Author(s). This is an open access article distributed under the CC BY-NC-ND 4.0 International license.

Biomimetic Transparent Slippery Surface for the Locomotion of Photocontrol Droplets and Bubbles.

Directed transportation and collection of liquids and bubbles play a vital role in the survival of ecosystems. Among them, the optical response control is widely used in the fields of microfluidic chips and chemical synthesis because of its high remote operation and fast response speed. However, due to poor light transmission, the development direction of traditional near-infrared (NIR) absorbing materials in the field of visualization is limited, and there are few reports of manufacturing an operating platform that can realize the directional movement of droplets/bubbles on a single platform. Here, a transparent photo-responsive PBFS platform is prepared for droplet and bubble manipulation by coating the etched glass substrate with Prussian blue (PB) nanocubes. When near-infrared (NIR) irradiation on the PBFS platform, PB nanocubes trigger heat production by photothermal means, due to the action of Marangoni force, the surface tension on the left and right sides of the droplets and bubbles is not uniform, forming a surface tension gradient, thereby driving the movement of the droplets and bubbles. The control platform has good application potential in the field of microchemical reaction and biomedical engineering and brings new solutions to the field of transparent photothermal materials.

Ultraslippery Surface for Efficient Fog Harvesting and Anti-Icing/Fouling.

The conventional Slippery Liquid Infused Porous Surface (SLIPS) encounters challenges such as silicone oil leakage and complex manufacturing of rough substrate structures. Thus, it is crucial to develop a lubricant that is highly adaptable and less prone to loss for surface structures; a temperature-controlled method of infusing oleogel into a superhydrophobic surface (SHS) is presented in this paper. This approach draws inspiration from the characteristics of Nepenthes pitcher plant structures, albeit without the need for intricate pore-making or nanowire structures. It is demonstrated that this resulting surface has exceptional fog harvesting capability, with a fog harvesting efficiency of 0.3222 g cm-2 min-1, which is twice as high as that of the laser aluminum (Al) sheet (0.1553 g cm-2 min-1). Moreover, the surface exhibits remarkable anti-icing properties, significantly prolonging the icing time by 21-fold compared to the pure Al sheet while maintaining a minimal ice adhesion force of only 0.16 N. Additionally, the surface showcases excellent antifouling performance, because contaminated droplets readily slide off without leaving residue. The environmentally friendly and straightforward preparation process ensures that it is suitable for large-scale industrial applications.

Amyloid Proteins Adhesive for Slippery Liquid-Infused Porous Surfaces.

Biomimetic slippery liquid-infused porous surfaces (SLIPS) have emerged as a promising solution to solve the limitations of superhydrophobic surfaces, such as inadequate durability in corrosion protection and a propensity for frosting. However, the challenge of ensuring strong, lasting adhesion on diverse materials to enhance the durability of the lubricant layer remains. The research addresses this by leveraging amyloid phase-transitioned lysozyme (PTL) as an adhesive interlayer, conferring stable attachment of SLIPS across a variety of substrates, including metals, inorganics, and polymers. The silica-textured interface robustly secures the lubricant with a notably low sliding angle of 1.15°. PTL-mediated adhesion fortifies the silicone oil attachment to the substrate, ensuring the retention of its repellent efficacy amidst mechanical stressors like ultrasonication, water scrubbing, and centrifugation. The integration of robust adhesion, cross-substrate compatibility, and durability under stress affords the PTL-modified SLIPS exceptional anti-fouling, anti-icing, and anti-corrosion properties, marking it as a leading solution for advanced protective applications.

Setting ethical limits on human gene editing after the fall of the somatic/germline barrier.

The ethical debate about what is now called human gene editing (HGE) has gone on for more than 50 y. For nearly that entire time, there has been consensus that a moral divide exists between somatic and germline HGE. Conceptualizing this divide as a barrier on a slippery slope, in this paper, I first describe the slope, what makes it slippery, and describe strong barriers that arrest the slippage down to the dystopian bottom of pervasive eugenic enhancement. I then show how the somatic/germline barrier in the debate has been weakened to the level of ineffectiveness, with no replacement below. I examine a number of possible barriers on the slope below the somatic/germline barrier, most of which lack sufficient strength. With the exception of the minority of people in the HGE debate who see the eugenic society as utopia, the majority will need a barrier on the slope to stop the slide to dystopia.

Slippery Au Nanosphere Monolayers with Analyte Enrichment and SERS Enhancement Functions.

Slippery surfaces can enrich analytes from solutions into tiny dots after solvent evaporation for surface-enhanced Raman scattering (SERS) detection. Here, we make the self-assembled Au nanosphere monolayers slippery, which can not only behave as SERS substrates but also enrich the analytes during solvent evaporation. A thin silica shell was used to wrap the Au nanosphere monolayer to allow the functionalization of a slippery polydimethylsiloxane brush monolayer onto it. These slippery Au nanosphere monolayers could be easily cleaned and reused many times. When Au nanospheres were introduced into the analyte solution droplet on the slippery Au nanosphere monolayer, a 3D Au nanoparticle/analyte aggregate was formed after solvent evaporation. Both the Au nanoparticle aggregate and the underneath slippery Au nanosphere monolayer could contribute to SERS enhancement. We endow the self-assembled Au nanosphere monolayer SERS substrates with an analyte enrichment function, greatly strengthening their SERS enhancement.

Live Imaging of 3D Hanging Drop Arrays through Manipulation of Light-Responsive Pyroelectric Slippery Surface and Chip Adhesion.

Three-dimensional (3D) hanging drop cell culture is widely used in organoid culture because of its lack of selection pressure and rapid cell aggregation. However, current hanging drop technology has limitations, such as a dependence on complex microfluidic transport channels or specific capillary force templates for drop formation, which leads to unchangeable drop features. These methods also hinder live imaging because of space and complexity constraints. Here, we have developed a hanging drop construction method and created a flexible 3D hanging drop construction platform composed of a manipulation module and an adhesion module. Their harmonious operation allows for the easy construction of hanging drops of varying sizes, types, and patterns. Our platform produces a cell hanging drop chip with small sizes and clear fields of view, thereby making it compatible with live imaging. This platform has great potential for personalized medicine, cancer and drug discovery, tissue engineering, and stem cell research.

Superwettable surfaces and factors impacting microbial adherence in microbiologically-influenced corrosion: a review.

Microbiologically-influenced corrosion (MIC) is a common operational hazard to many industrial processes. The focus of this review lies on microbial corrosion in the maritime industry. Microbial metal attachment and colonization are the critical steps in MIC initiation. We have outlined the crucial factors influencing corrosion caused by microorganism sulfate-reducing bacteria (SRB), where its adherence on the metal surface leads to Direct Electron Transfer (DET)-MIC. This review thus aims to summarize the recent progress and the lacunae in mitigation of MIC. We further highlight the susceptibility of stainless steel grades to SRB pitting corrosion and have included recent developments in understanding the quorum sensing mechanisms in SRB, which governs the proliferation process of the microbial community. There is a paucity of literature on the utilization of anti-quorum sensing molecules against SRB, indicating that the area of study is in its nascent stage of development. Furthermore, microbial adherence to metal is significantly impacted by surface chemistry and topography. Thus, we have reviewed the application of super wettable surfaces such as superhydrophobic, superhydrophilic, and slippery liquid-infused porous surfaces as "anti-corrosion coatings" in preventing adhesion of SRB, providing a potential avenue for the development of practical and feasible solutions in the prevention of MIC. The emerging field of super wettable surfaces holds significant potential for advancing efficient and practical MIC prevention techniques.

Tough, Transparent, and Slippery PVA Hydrogel Led by Syneresis.

Slippery and transparent polyvinyl alcohol (PVA) hydrogels with mechanical robustness exhibit broad applications in artificial biological soft tissues, flexible wearable electronics, and implantable biomedical devices. Most of the current PVA hydrogels, however, are unable to integrate these features, which compromises its performance in biological and engineering applications. To achieve such purpose, herein, a novel tactic is proposed, salting-out-after-syneresis of PVA, to realize a mechanically robust and highly transparent slippery PVA hydrogel. The syneresis of PVA sol is first conducted to form highly dense and transparent PVA polymer networks, then the salting-out effect tunes the aggregation of the polymer chains to rapidly induce the phase separation and crystallization. The resultant hydrogels show the transparency up to 98% in the visible region, the tribological coefficient down to 0.0081, and the excellent mechanical properties with strength, modulus, and toughness of 26.72 ± 1.05, 6.66 ± 0.29 MPa, and 55.21 ± 1.62 MJ m-3 , respectively. To reveal the potentials, PVA contact lens that combine remarkable lubrication, anti-protein adhesion, biocompatibility, and drug-loading functions are demonstrated. This strategy provides a simple and new avenue for developing the mechanically robust, transparent, and hydrated hydrogels, showing the potential in biomedicine and wearable devices.

Photothermal Solid Slippery Surfaces with Rapid Self-Healing, Improved Anti/De-Icing and Excellent Stability.

Icing phenomenon that occurs universally in nature and industry gets a great impact on human life. Over the past decades, extensive efforts have been made for a wide range of anti-icing/deicing surfaces, but the preparation of anti-icing/deicing interfaces that combine stability, rapid self-healing and excellent anti-icing/deicing performance remains a challenge. In this study, a photothermal solid slippery surface with excellent comprehensive performance is prepared by integrating cellulose acetate film, carbon nanotubes with paraffin wax (CCP). Apart from the excellent anti-icing and deicing properties at -17 ± 1.0 °C under 1 sun illumination, the surface can further achieve deicing at temperatures as low as -22 ± 1.0 °C under infrared light. The fabricated surface also exhibits great stability when placed in harsh conditions such as underwater or ultra-low temperature environments for over 30 days. Even when suffering from physical damage, the prepared surface can rapidly self-repair under 1 sun illumination or near-infrared (NIR) illumination within 16.0 ± 1.5 s. Due to the rapid and repeatable self-healing performance, the lubricating properties of the interface material do not deteriorate even after 50 repeated abrasing-repairing cycles. The photothermal solid slippery surface possesses wide-ranging applications and commercial value at high latitude and altitude regions.

Intelligent Wearable Wrist Pulse Detection System Based on Piezoelectric Sensor Array.

The human radial artery pulse carries a rich array of biomedical information. Accurate detection of pulse signal waveform and the identification of the corresponding pulse condition are helpful in understanding the health status of the human body. In the process of pulse detection, there are some problems, such as inaccurate location of radial artery key points, poor signal noise reduction effect and low accuracy of pulse recognition. In this system, the pulse signal waveform is collected by the main control circuit and the new piezoelectric sensor array combined with the wearable wristband, creating the hardware circuit. The key points of radial artery are located by an adaptive pulse finding algorithm. The pulse signal is denoised by wavelet transform, iterative sliding window and prediction reconstruction algorithm. The slippery pulse and the normal pulse are recognized by feature extraction and classification algorithm, so as to analyze the health status of the human body. The system has accurate pulse positioning, good noise reduction effect, and the accuracy of intelligent analysis is up to 98.4%, which can meet the needs of family health care.

Nanostructure Explains the Behavior of Slippery Covalently Attached Liquid Surfaces.

Slippery covalently-attached liquid surfaces (SCALS) with low contact angle hysteresis (CAH, <5°) and nanoscale thickness display impressive anti-adhesive properties, similar to lubricant-infused surfaces. Their efficacy is generally attributed to the liquid-like mobility of the constituent tethered chains. However, the precise physico-chemical properties that facilitate this mobility are unknown, hindering rational design. This work quantifies the chain length, grafting density, and microviscosity of a range of polydimethylsiloxane (PDMS) SCALS, elucidating the nanostructure responsible for their properties. Three prominent methods are used to produce SCALS, with characterization carried out via single-molecule force measurements, neutron reflectometry, and fluorescence correlation spectroscopy. CO2 snow-jet cleaning was also shown to reduce the CAH of SCALS via a modification of their grafting density. SCALS behavior can be predicted by reduced grafting density, Σ, with the lowest water CAH achieved at Σ≈2. This study provides the first direct examination of SCALS grafting density, chain length, and microviscosity and supports the hypothesis that SCALS properties stem from a balance of layer uniformity and mobility.

Nature-Inspired High Temperature Scale-Resistant Slippery Lubricant-Induced Porous Surfaces (HTS-SLIPS).

Scale formation is a longstanding and unresolved problem in a number of fields, including power production, petroleum exploration, thermal desalination, and construction. Herein, a high-temperature scale-resistant slippery lubricant-induced surface (HTS-SLIPS) is developed by one-step electrodeposition and lubricant infusion. The fractal cauliflower-like morphology with lubricant oil is conducive to forming an ultralow contact angle hysteresis of ≈1°. The 10-d real-world boiling trial indicates that by replacing the uncoated surface with HTS-SLIPS, the reduction in scale mass is greater than 200% because of the low surface free energy (4.3 mJ m-2 ) and outstanding smoothness (Ra  = 41 ± 8 nm) of HTS-SLIPS. Thanks to the scale retardation, the bubble departure frequency of HTS-SLIPS is eightfold higher than that of uncoated surfaces, signifying superior heat transfer efficiency. In these demonstrations, HTS-SLIPS coated spiral tube exhibits better flowability and lower pressure drop than the uncoated one. In addition, favorable compatibility between HTS-SLIPS and mechanical vibration is experimentally verified to strengthen the descaling of SLIPS synergistically. It is anticipated that the simple and scalable coating fabrication approach will be applicable in numerous industrial high-temperature processes where scale formation is encountered.

Self-Transportation of Superparamagnetic Droplets on a Magnetic Gradient Slippery Surface with On/Off Sliding Controllability.

Recently, research about droplet self-transportation on slippery surfaces has become a hotspot. However, to achieve on/off sliding control during the self-transportation process is still difficult. Herein, we report a magnetic slippery surface, and demonstrate on/off sliding control during the self-transportation of superparamagnetic droplets. The surface is prepared through integrating a substrate that has a gradient magnetic region with a layer of paraffin infused hydrophobic SiO2 nanoparticles. On the surface, a superparamagnetic droplet is pinned at room temperature (about 25 °C), while it can self-transport directionally as the temperature is increased to about 70 °C. When the temperature is cooled down again, the droplet would return to the pinned state, indicating that on/off sliding control during the self-transportation process can be achieved. Furthermore, based on the excellent controllability, controllable coalescence of two droplets from opposite direction is displayed, demonstrating its potential application in numerous areas.

Multibioinspired slippery surfaces with wettable bump arrays for droplets pumping.

Droplet manipulation is playing an important role in various fields, including scientific research, industrial production, and daily life. Here, inspired by the microstructures and functions of Namib desert beetles, Nepenthes pitcher plants, and emergent aquatic plants, we present a multibioinspired slippery surface for droplet manipulation by employing combined strategies of bottom-up colloidal self-assembly, top-down photolithography, and microstructured mold replication. The resultant multilayered hierarchical wettability surface consists of hollow hydrogel bump arrays and a lubricant-infused inverse opal film as the substrate. Based on capillary force, together with slippery properties of the substrate and wettability of the bump arrays, water droplets from all directions can be attracted to the bumps and be collected through hollow channels to a reservoir. Independent of extra energy input, droplet condensation, or coalescence, these surfaces have shown ideal droplet pumping and water collection efficiency. In particular, these slippery surfaces also exhibit remarkable features including versatility, generalization, and recyclability in practical use such as small droplet collection, which make them promising candidates for a wide range of applications.

Directional pumping of water and oil microdroplets on slippery surface.

Transporting water and oil microdroplets is important for applications ranging from water harvesting to biomedical analysis but remains a great challenge. This is due to the amplified contact angle hysteresis and insufficient driving force in the micrometer scale, especially for low-surface energy oil droplets. Coalescence of neighboring droplets, which releases vast additional surface energy, was often required, but its relatively uncontrollable nature brings uncertainties to the droplet motion, and the methodology is not applicable to single droplets. Here we introduce a strategy based on slippery surface with immobilized lubricant menisci to directionally transport microdroplets. By simply mounting hydrogel dots on slippery surface, the raised menisci remotely pump microdroplets via capillary force with high efficiency, regardless of droplet size or surface energy. By proof-of-concept experiments, we demonstrate that our method allows for highly efficient water droplet collection and highly sensitive biomedical analyte detection.

Multi-bioinspired and Multistructural Integrated Patterned Nanofibrous Surface for Spontaneous and Efficient Fog Collection.

Harvesting water from untapped fog is a potential and sustainable solution to freshwater shortages. However, designing high-efficiency fog collectors is still a critical and challenging task. Herein, learning from the unique microstructures and functionalities of the Namib desert beetle, honeycomb, and pitcher plant, we present a multi-bioinspired patterned fog collector with hydrophilic nanofibrous bumps and a hydrophobic slippery substrate for spontaneous and efficient fog collection. Interestingly, hydrophilic nanofibrous bumps display a honeycomb-like cellular grid structure self-assembled from electrospun nanofibers. Notably, the patterned nanofibrous fog collector exhibits superior water-collecting efficiency of 1111 mg cm-2 h-1. The hydrophilic nanofibrous bumps increase the effective fog-collecting area, and the hydrophobic slippery substrate promotes quick transport of collected water in the desired direction reducing the secondary water evaporation, finally achieving rapid directional transport of tiny droplets and high-efficiency water collection. This work opens a new avenue to collect water efficiently and provides clues to research on the multi-bioinspired synergistical optimization strategy.

Novel Slippery Liquid-Infused Porous Surfaces (SLIPS) Based on Electrospun Polydimethylsiloxane/Polystyrene Fibrous Structures Infused with Natural Blackseed Oil.

Hydrophobic fibrous slippery liquid-infused porous surfaces (SLIPS) were fabricated by electrospinning polydimethylsiloxane (PDMS) and polystyrene (PS) as a carrier polymer on plasma-treated polyethylene (PE) and polyurethane (PU) substrates. Subsequent infusion of blackseed oil (BSO) into the porous structures was applied for the preparation of the SLIPS. SLIPS with infused lubricants can act as a repellency layer and play an important role in the prevention of biofilm formation. The effect of polymer solutions used in the electrospinning process was investigated to obtain well-defined hydrophobic fibrous structures. The surface properties were analyzed through various optical, macroscopic and spectroscopic techniques. A comprehensive investigation of the surface chemistry, surface morphology/topography, and mechanical properties was carried out on selected samples at optimized conditions. The electrospun fibers prepared using a mixture of PDMS/PS in the ratio of 1:1:10 (g/g/mL) using tetrahydrofuran (THF) solvent showed the best results in terms of fiber uniformity. The subsequent infusion of BSO into the fabricated PDMS/PS fiber mats exhibited slippery behavior regarding water droplets. Moreover, prepared SLIPS exhibited antibacterial activity against Staphylococcus aureus and Escherichia coli bacterium strains.

Magnetic Self-Healing Composites: Synthesis and Applications.

Magnetic composites and self-healing materials have been drawing much attention in their respective fields of application. Magnetic fillers enable changes in the material properties of objects, in the shapes and structures of objects, and ultimately in the motion and actuation of objects in response to the application of an external field. Self-healing materials possess the ability to repair incurred damage and consequently recover the functional properties during healing. The combination of these two unique features results in important advances in both fields. First, the self-healing ability enables the recovery of the magnetic properties of magnetic composites and structures to extend their service lifetimes in applications such as robotics and biomedicine. Second, magnetic (nano)particles offer many opportunities to improve the healing performance of the resulting self-healing magnetic composites. Magnetic fillers are used for the remote activation of thermal healing through inductive heating and for the closure of large damage by applying an alternating or constant external magnetic field, respectively. Furthermore, hard magnetic particles can be used to permanently magnetize self-healing composites to autonomously re-join severed parts. This paper reviews the synthesis, processing and manufacturing of magnetic self-healing composites for applications in health, robotic actuation, flexible electronics, and many more.