Formulation Development and Evaluation of Cannabidiol Hot-Melt Extruded Solid Self-Emulsifying Drug Delivery System for Oral Applications.

Cannabidiol (CBD) is a highly lipophilic compound with poor oral bioavailability, due to poor aqueous solubility and extensive pre-systemic metabolism. The aim of this study was to explore the potential of employing Hot Melt Extrusion (HME) technology for the continuous production of Self Emulsifying Drug Delivery Systems (SEDDS) to improve the solubility and in vitro dissolution performance of CBD. Accordingly, different placebos were processed through HME in order to obtain a lead CBD loaded solid SEDDS. Two SEDDS were prepared with sesame oil, Poloxamer 188, Gelucire®59/14, PEO N80 and Soluplus®. Moreover, Vitamin E was added as an antioxidant. The SEDDS formulations demonstrated emulsification times of 9.19 and 9.30 min for F1 and F2 respectively. The formed emulsions showed smaller droplet size ranging from 150-400 nm that could improve lymphatic uptake of CBD and reduce first pass metabolism. Both formulations showed significantly faster in vitro dissolution rate (90% for F1 and 83% for F2) compared to 14% for the pure CBD within the first hour, giving an enhanced release profile. The formulations were tested for stability over a 60-day time period at 4°C, 25°C, and 40°C. Formulation F1 was stable over the 60-day time-period at 4°C. Therefore, the continuous HME technology could replace conventional methods for processing SEDDS and improve the oral delivery of CBD for better therapeutic outcomes.

Aromatic Fingerprints: VOC Analysis with E-Nose and GC-MS for Rapid Detection of Adulteration in Sesame Oil.

Food quality assurance is an important field that directly affects public health. The organoleptic aroma of food is of crucial significance to evaluate and confirm food quality and origin. The volatile organic compound (VOC) emissions (detectable aroma) from foods are unique and provide a basis to predict and evaluate food quality. Soybean and corn oils were added to sesame oil (to simulate adulteration) at four different mixture percentages (25-100%) and then chemically analyzed using an experimental 9-sensor metal oxide semiconducting (MOS) electronic nose (e-nose) and gas chromatography-mass spectroscopy (GC-MS) for comparisons in detecting unadulterated sesame oil controls. GC-MS analysis revealed eleven major VOC components identified within 82-91% of oil samples. Principle component analysis (PCA) and linear detection analysis (LDA) were employed to visualize different levels of adulteration detected by the e-nose. Artificial neural networks (ANNs) and support vector machines (SVMs) were also used for statistical modeling. The sensitivity and specificity obtained for SVM were 0.987 and 0.977, respectively, while these values for the ANN method were 0.949 and 0.953, respectively. E-nose-based technology is a quick and effective method for the detection of sesame oil adulteration due to its simplicity (ease of application), rapid analysis, and accuracy. GC-MS data provided corroborative chemical evidence to show differences in volatile emissions from virgin and adulterated sesame oil samples and the precise VOCs explaining differences in e-nose signature patterns derived from each sample type.

Surface Chemistry Study of the Interactions of Sesame Oil with Meibomian Films.

A possible approach for the treatment of meibomian gland disease (MGD) can be the supplementation of meibomian gland secretion (MGS) with nonpolar lipids (NPL) rich plant oils. Sesame oil (SO), approximately equal in monounsaturated fat (oleic acid, 40% of total) and polyunsaturated fat (linoleic acid, 42% of total), has shown multiple health benefits due to its anti-inflammatory and antioxidant effects. Thus, the interactions between SO and MGS in surface layers deserve further study. Therefore, pseudobinary films were formed with controlled MGS/SO molar ratios (0%, 10%, 30%, 50%, and 100% SO) at the air/water surface of the Langmuir trough over phosphate buffered saline (pH 7.4) subphase. Surface pressure (π)-area (A) isotherms and Brewster angle microscopy observations showed nonideal interactions where SO aggregates with MGS and complements the NPL stratum of the meibomian layers. The analysis of stress relaxation transients with Kohlrausch-Williams-Watts equation revealed that the supplementation of fixed amount of MGS with excess lipids via SO altered the dilatational elasticity of the films as reflected by the increase of the exponent ß. Thus, SO with its unique combination of high oxidative stability and abundance of long polyunsaturated acyl chains might be a useful supplement to MGS layers.

Authenticity Assessment from Sesame Seeds to Oil and Sesame Products of Various Origin by Differential Scanning Calorimetry.

The aim of this study was to conduct thermal characterization of sesame seeds and oils from various geographical origins (Ethiopia, India, Nigeria, Sudan, Turkey), different method of extraction (hexane and cold-pressing), and different types of derived products (halva and tahini). Thermal characterization was investigated using differential scanning calorimetry (DSC), which showed that origin of the seeds has no influence on the melting profile of sesame oil (peak temperature and enthalpy). Method of extraction (hexane and cold-pressing) influenced the peak temperatures of the resulting oils (p ≤ 0.05). The addition of 20% of palm olein to pure sesame oil influenced the significant changes in thermodynamic parameters such as peak temperature (Tm2), which was lowered from −5.89 °C to −4.99 °C, peak half width (T1/2), elevated from 3.01 °C to 4.52 °C, and the percentage of first peak area (% peak 1) lowered from 87.9 to 73.2% (p ≤ 0.05). The PCA method enabled to distinguish authentic and adulterated sesame oils of various origins. There were no significant differences in thermal properties among the products (halva, tahini) and the authentic sesame oil (p > 0.05). The obtained results showed DSC feasibility to characterize sesame oil and sesame products in terms of authenticity.

Application of Maillard Reaction Products Derived Only from Enzymatically Hydrolyzed Sesame Meal to Enhance the Flavor and Oxidative Stability of Sesame Oil.

The low-temperature roasting of sesame oil has become increasingly popular because of its nutritional benefits; however, the flavor is reduced. In order to improve the quality of sesame oil without exogenous addition, sesame meal was hydrolyzed and further used to prepare Maillard reaction products (MRPs) while protease hydrolysis (PH) and glucoamylase-protease hydrolysis (GPH) were used, and their respective Maillard products (PHM and GPHM) were added in the oils for reducing sugar and total sugar content determination, free amino acid determination, and color and descriptive sensory analysis, as well as electronic nose, SPME-GC-MS, odor activity value, and oxidative stability analyses. Results showed that the MRPs could be produced using the enzymatically hydrolyzed sesame meal without exogenous addition, and the oil flavor blended with GPHM (GPHM-SO) was significantly (p < 0.05) improved with the best sensory quality. The composition of pyrazines (119.35 µg/mL), furans (13.95 µg/mL), and sulfur substances (6.25 µg/mL) contributed positively to sensory properties in GPHM-SO, and 2,5-dimethylpyrazine, 2,6-dimethylpyrazine, and 2,3-dimethylpyrazine were characterized as the key flavor compounds with odor activity values of 7.01, 14.80, and 31.38, respectively. Furthermore, the oxidative stability of the oil was significantly improved with the addition of MRPs, and the shelf life of GPHM-SO was predicted to be extended by 1.9 times more than that of the crude oil based on the accelerated oxidation fitting analysis. In general, the MRPs derived only from sesame meal can enhance the flavor and oxidative stability of sesame oil and can be applied in the oil industry.

Effects of Seed Roasting Temperature on Sesame Oil Fatty Acid Composition, Lignan, Sterol and Tocopherol Contents, Oxidative Stability and Antioxidant Potential for Food Applications.

Roasting is a key step for preparing sesame oil that leads to important changes in its organoleptic properties and quality. In this study, white sesame seeds were roasted for 20 min in an electric oven at different temperatures (120, 150, 180, 210, 250 and 300 °C). The oils extracted from unroasted and roasted seeds were compared for their chemical composition: fatty acids (including trans isomers), phytosterols, lignans (sesamin and sesamolin), tocopherols and total phenolic compounds, as well as their oxidative stability and antiradical capacity. There were no obvious differences in the oil densities, refractive indexes or iodine values, but the saponification values were affected by temperature. Relevant primary and secondary lipid oxidation were observed at T > 250 °C, resulting in a higher p-anisidine value and K232 as well as K268 values. Roasting improved oil yield (from 33.5 to 62.6%), increased its induction period (from 5.5 to 10.5 h) and enhanced the total phenolic content (from 152 to 194 mg/100 g) and antiradical activity of the extracted oil. Depending on roasting temperature, a gradual decline was recorded in total amounts of phytosterols (up to 17.4%), γ-tocopherol (up to 10.6%), sesamolin (maximum of 27.5%) and sesamin (maximum of 12.5%). All the investigated oils presented a low quantity in triglyceride polymers, clearly below the maximum tolerated quantity according to the European regulation. The optimal roasting temperature for obtaining high nutritional grade oil within the permissible values was 210 °C. The unsaponifiable components (including lignans and sterols) extracted from roasted seeds have been shown to be natural additives to fresh meatball products to extend shelf life. The results of this study may help to boost the nutritional content of plant-based diets by allowing for the use of roasted sesame seed oil and its components.

Assessment of Agroeconomic Indicators of Sesamum indicum L. as Influenced by Application of Boron at Different Levels and Plant Growth Stages.

To achieve the nutritional target of human food, boron (B) has been described as an essential mineral in determining seed and theoretical oil yield of Sesamum indicum L. The research to increase its cultivation is garnering attention due to its high oil content, quality and its utilization for various purposes, which include human nutrition as well as its use in the food industry. For this, a two-year field experiment was performed at PAU, Punjab, India to determine the effect of different concentrations of foliar-applied B (20, 30 and 40 mg L-1) and different growth stages of crop, i.e., we measured the effects on agroeconomic indicators and certain quality parameters of sesame using different concentrations of B applied at the flowering and capsule formation stages as compared to using water spray and untreated plants. Water spray did not significantly affect the studied parameters. However, B application significantly increased the yield, uptake, antioxidant activity (AOA) and theoretical oil content (TOC) compared to those of untreated plants. The maximum increase in seed yield (26.75%), B seed and stover uptake (64.08% and 69.25%, respectively) as well as highest AOA (69.41%) and benefit to cost ratio (B:C ratio 2.63) was recorded when B was applied at 30 mg L-1 at the flowering and capsule formation stages. However, the maximum sesame yield and B uptake were recorded when B was applied at a rate of 30 mg L-1. A significant increase in TOC was also recorded with a B application rate of 30 mg L-1. For efficiency indices, the higher values of boron agronomic efficiency (BAE) and boron crop recovery efficiency (BCRE) were recorded when B was applied at 20 mg L-1 (5.25 and 30.56, respectively) and 30 mg L-1 (4.96 and 26.11, respectively) at the flowering and capsule formation stages. In conclusion, application of B @ 30 mg L-1 at the flowering and capsule formation stages seemed a viable technique to enhance yield, B uptake and economic returns of sesame.

Effects of variety, storage container, and duration on the physical properties, oil content, germination capacity, and seed loss due to Plodia interpunctella infestation of Ethiopian sesame.

BACKGROUND: Owing to fluctuations of international market prices and excess supply during peak harvesting seasons, farmers and traders often suffer from a low market price of sesame. Such a negative impact can be ameliorated by taking advantage of times with a better market price during the off season. This study aimed to investigate the impact of different storage containers on gravimetric properties and germination capacities of five different sesame varieties as well as their impact on Indian meal moth (Plodia interpunctella). RESULTS: There were differences among the types of storage containers in terms of moisture content, oil content, thousand seed weight, and germination capacity with the storage duration. However, in terms of bulk density, true density, and porosity, the results were consistent. On average, a few losses in thousand seed weight for varieties stored in Purdue Improved Crop Storage bags (1.7%), metal silos (2.4%), and GrainPro bags (3.4%) were observed during 12 months' storage compared with polypropylene bags (17%). The difference among sesame varieties in terms of weight loss and loss of webbing due to P. interpunctella varied with storage duration. On average, about 9.4% weight loss and 5.7% loss due to webbing was measured for seed stored in polypropylene bags due to the natural infestation of P. interpunctella. No pest was found in hermetic containers. CONCLUSION: In general, to fetch better market prices, the use of hermetic storage is more efficient to maintain the desired gravimetric properties and to prevent losses due to P. interpunctella infestation compared with the commonly used woven polypropylene bags. © 2020 Society of Chemical Industry.

Effects of Sesamin, the Major Furofuran Lignan of Sesame Oil, on the Amplitude and Gating of Voltage-Gated Na+ and K+ Currents.

Sesamin (SSM) and sesamolin (SesA) are the two major furofuran lignans of sesame oil and they have been previously noticed to exert various biological actions. However, their modulatory actions on different types of ionic currents in electrically excitable cells remain largely unresolved. The present experiments were undertaken to explore the possible perturbations of SSM and SesA on different types of ionic currents, e.g., voltage-gated Na+ currents (INa), erg-mediated K+ currents (IK(erg)), M-type K+ currents (IK(M)), delayed-rectifier K+ currents (IK(DR)) and hyperpolarization-activated cation currents (Ih) identified from pituitary tumor (GH3) cells. The exposure to SSM or SesA depressed the transient and late components of INa with different potencies. The IC50 value of SSM needed to lessen the peak or sustained INa was calculated to be 7.2 or 0.6 µM, while that of SesA was 9.8 or 2.5 µM, respectively. The dissociation constant of SSM-perturbed inhibition on INa, based on the first-order reaction scheme, was measured to be 0.93 µM, a value very similar to the IC50 for its depressant action on sustained INa. The addition of SSM was also effective at suppressing the amplitude of resurgent INa. The addition of SSM could concentration-dependently inhibit the IK(M) amplitude with an IC50 value of 4.8 µM. SSM at a concentration of 30 µM could suppress the amplitude of IK(erg), while at 10 µM, it mildly decreased the IK(DR) amplitude. However, the addition of neither SSM (10 µM) nor SesA (10 µM) altered the amplitude or kinetics of Ih in response to long-lasting hyperpolarization. Additionally, in this study, a modified Markovian model designed for SCN8A-encoded (or NaV1.6) channels was implemented to evaluate the plausible modifications of SSM on the gating kinetics of NaV channels. The model demonstrated herein was well suited to predict that the SSM-mediated decrease in peak INa, followed by increased current inactivation, which could largely account for its favorable decrease in the probability of the open-blocked over open state of NaV channels. Collectively, our study provides evidence that highlights the notion that SSM or SesA could block multiple ion currents, such as INa and IK(M), and suggests that these actions are potentially important and may participate in the functional activities of various electrically excitable cells in vivo.

Effects of Sesame Oil Aroma on Mice after Exposure to Water Immersion Stress: Analysis of Behavior and Gene Expression in the Brain.

(1) Background: Sesame has been popular as a healthy food since ancient times, and effects of the aroma component of roasted sesame are also expected. However, little research has been reported on its scent; (2) Methods: Jcl:ICR male mice were housed under water immersion stress for 24 h. Then, the scent of saline or sesame oil was inhaled to stress groups for 90 min. We investigated the effects of sesame oil aroma on the behavior and brains of mice; (3) Results: In an elevated plus maze test, the rate of entering to open arm and the staying time were decreased by the stress. These decrements were significantly enhanced by sesame oil aroma. Stress had a tendency to increase the serum corticosterone concentration, which was slightly decreased by the aroma. Expression of Kruppel-like factor-4 (Klf-4) and Dual-specificity phosphatase-1 (Dusp-1) in the striatum were increased by water immersion stress, and the level of Klf-4 and Dusp-1 in the striatum and hippocampus were significantly attenuated by sesame oil aroma (4) Conclusions: The present results strongly suggest that the odor component of sesame oil may have stress suppressing effects. Moreover, Klf-4 and Dusp-1 may be sensitive stress-responsive biomarkers.

Simultaneous and rapid determination of sesamin and sesamolin in sesame oils using excitation-emission matrix fluorescence coupled with self-weighted alternating trilinear decomposition.

BACKGROUND: Sesamin and sesamolin are two typical and important lignans isolated from sesame oil. Various studies have shown the bioactivity, physiological activity, and potential health benefits of the two components. In this study, a rapid method for the simultaneous determination of sesamin and sesamolin in sesame oils was proposed. The excitation-emission fluorescence spectra of the oils were obtained after a simple pretreatment, then self-weighted alternating trilinear decomposition was used to extract the quantitative information from the very overlapping spectra. RESULTS: It was found that reasonable quantification results could be obtained with the limits of detection for the two lignans. These limits were 0.05 mg/g and 0.24 mg/g, and the limits of quantitation were 0.14 mg/g and 0.74 mg/g, respectively. The average recoveries for sesamin and sesamolin were 99.05% and 94.97%. CONCLUSION: The results indicate that, with simple sample pretreatment, the application for combining excitation-emission fluorescence spectra and self-weighted alternating trilinear decomposition can be a useful and sensitive tool for the determination of lignans in sesame oil. © 2020 Society of Chemical Industry.

Improvement of the oxidative stability of cold-pressed sesame oil using products from the Maillard reaction of sesame enzymatically hydrolyzed protein and reducing sugars.

BACKGROUND: In recent years, cold-pressed oils have become more and more popular with consumers. However, their oxidative stability is low. Improving the oxidative stability of cold-pressed oils will increase their shelf life. Maillard reaction products (MRPs) have been shown to promote the oxidative stability of lipids. In this study, products from the Maillard reaction of reducing sugars and sesame enzymatically hydrolyzed protein (SEHP) were added to cold-pressed sesame oils to improve their oxidative stability. RESULTS: Three types of MRPs from reducing sugars (xylose, fructose, and glucose) and SEHP were prepared. Xylose-SEHP MRPs prepared under optimum conditions had the highest antioxidant activities among the three. The optimum conditions for xylose-SEHP were as follows: reaction temperature, 130 °C; reaction time, 180 min; pH, 6.5; and sugar/protein ratio, 10:1. The addition of xylose-SEHP MRPs at a level of 20 g kg-1 could significantly improve the oxidative stability of cold-pressed sesame oil. Besides, the addition of MRPs reduced the loss of tocopherol. The interaction of MRPs with endogenous antioxidants in the sesame oil (sesamol and tocopherol) was proved by comparison with lard. There was a synergistic increase in antioxidant activity for the combination of MRPs and sesamol and the combination of MRPs and tocopherol. CONCLUSIONS: The results provide evidence that adding certain MRPs can improve the oxidative stability of cold-pressed sesame oil. © 2019 Society of Chemical Industry.

Gene expression profiles that shape high and low oil content sesames.

BACKGROUND: Sesame (Sesamum indicum) can accumulate over 60% oil in its seed. However, low oil content genotypes with an oil content of less than 50% are also observed. To gain insights into how genes shape this variation, we examined 22 seed and carpel transcriptomes from 3 varieties of sesame with high and low oil content. RESULTS: A total of 34.6~52.2% of the sesame genes were expressed with a RPKM greater than 5 in the 22 tissue samples. The expressed gene numbers tended to decrease in the seed but fluctuated in the carpels from 10 to 30 days post-anthesis (DPA). Compared with that of the low oil content sesames, the high oil content sesame exhibited more positive gene expression during seed development. Typically, genes involved in lipid biosynthesis were enriched and could distinguish the high and low genotypes at 30 DPA, suggesting the pivotal role of seed oil biosynthesis in the later stages. Key homologous lipid genes that function in TAG biosynthesis, including those that encoded glycerol-3-phosphate acyltransferase (GPAT), acyl-CoA:diacylglycerol acyltransferase (DGAT), and phospholipid:diacylglycerol acyltransferase (PDAT), were strengthened asynchronously at different stages, but the lipid transfer protein (LTP)-encoding genes, including SIN_1019175, SIN_1019172 and SIN_1010009, usually were highlighted in the high oil content sesames. Furthermore, a list of 23 candidate genes was identified and predicted to be beneficial for higher oil content accumulation. Despite the different gene expression patterns between the seeds and carpels, the two tissues showed a cooperative relationship during seed development, and biological processes, such as transport, catabolic process and small molecule metabolic process, changed synchronously. CONCLUSIONS: The study elucidated the different expression profiles in high and low oil content sesames and revealed key stages and a list of candidate genes that shaped oil content variation. These findings will accelerate dissection of the genetic mechanism of sesame oil biosynthesis.

Effect of urea, compost, manure and bio-fertilizers on yield, percentage and composition of fatty acids of sesame seed oil (Sesamum indicum L.).

This study was carried out in Iran during two growing seasons 2016-2017. Sesame is one of the earliest oilseed plants, high oil percentage and high content of unsaturated fatty acids, especially oleic acid and linoleic acid, have led to an increase in the nutritional quality of sesame oil. Accordingly, a two-year experiment was conducted as factorial based on randomized complete block design with three replications. The evaluated factors included four levels of urea as nitrogen fertilizer (0, 33, 66 and 100% of plant requirement), three kinds of organic fertilizer (manure, vermicompost and control) and four kinds of biofertilizers (Azosperillum, Azotobacter, Azosperillum +Azotobacter and control). At the end of the growing season, seed yield, percentage and yield of seed oil and fatty acids composition (oleic acid, linolenic acid, linoleic acid, stearic acid and palmitic acid) were measured. The results showed that the effect of different levels of nitrogen, organic and biological fertilizers on all studied traits was significant in two years of experiment and in all three environments (control, manure and compost). Vermicompost fertilizer and Azosperillum + Azotobacter have a more favorable effect on traits than other levels of each of these fertilizers, but nitrogen fertilizer levels have different effects on different traits.  The highest seed yield (1298 kg ha-1) was obtained for control environment in 100% nitrogen application, for manure environment in 33% nitrogen application (1565 kg ha-1) and for compost environment in 66% nitrogen application (1799 kg ha-1).

A systematic review on antioxidant and antiinflammatory activity of Sesame (Sesamum indicum L.) oil and further confirmation of antiinflammatory activity by chemical profiling and molecular docking.

Traditionally, sesame oil (SO) has been used as a popular food and medicine. The review aims to summarize the antioxidant and antiinflammatory effects of SO and its identified compounds as well as further fatty acid profiling and molecular docking study to correlate the interaction of its identified constituents with cyclooxygenase-2 (COX-2). For this, a literature study was made using Google Scholar, Pubmed, and SciFinder databases. Literature study demonstrated that SO has potential antioxidant and antiinflammatory effects in various test systems, including humans, animals, and cultured cells through various pathways such as inhibition of COX, nonenzymatic defense mechanism, inhibition of proinflammatory cytokines, NF-kB or mitogen-activated protein kinase signaling, and prostaglandin synthesis pathway. Fatty acid analysis of SO using gas chromatography identified known nine fatty acids. In silico study revealed that sesamin, sesaminol, sesamolin, stigmasterol, Δ5-avenasterol, and Δ7-avenasterol (-9.6 to -10.7 kcal/mol) were the most efficient ligand for interaction and binding with COX-2. The known fatty acid also showed binding efficiency with COX-2 to some extent (-6.0 to -8.4 kcal/mol). In summary, it is evident that SO may be one of promising traditional medicines that we could use in the prevention and management of diseases associated with oxidative stress and inflammation.

Oxidative stability of sesame and flaxseed oils and their effects on morphometric and biochemical parameters in an animal model.

BACKGROUND: Sesame and flaxseed oils, which are rich in essential n-6 and n-3 polyunsaturated fatty acids, are widely consumed. We have determined the optical behavior with respect to the quality and identity of cold-pressed sesame and flaxseed oils. The effects of these oils and their combinations on metabolic parameters in animal models were also measured. RESULTS: Flaxseed oil emitted carotenoid fluorescence (500-650 nm), although it was more unstable than sesame oil, which had a larger induction period by the Rancimat method. The greater stability of sesame may be a result of the lower quantity of linolenic fatty acids. These oils were added to the feed of 56 rats, whereas animal fat was used for the control group. The sesame oil, flaxseed oil and sesame + flaxseed oils groups showed a significantly reduced adiposity index and blood glucose compared to the control group, whereas total cholesterol, high-density lipoprotein and triglycerides were lower in flaxseed oil and sesame + flaxseed oils (P < 0.05). Sesame + flaxseed oils had reduced levels of low-density lipoprotein and non-high-density lipoprotein (P < 0.05), indicating an anti-atherogenic effect in this group. CONCLUSION: Sesame oil was more stable than flaxseed oil. In an animal model, the diets with polyunsaturated fat sources proportions of 1:1 n-6:n-3 polyunsaturated fatty acids, improved the metabolic parameters, implying cardioprotective effects. © 2016 Society of Chemical Industry.

Synthesis and Antioxidant Activity of Alkyl Nitroderivatives of Hydroxytyrosol.

A series of alkyl nitrohydroxytyrosyl ether derivatives has been synthesized from free hydroxytyrosol (HT), the natural olive oil phenol, in order to increase the assortment of compounds with potential neuroprotective activity in Parkinson's disease. In this work, the antioxidant activity of these novel compounds has been evaluated using Ferric Reducing Antioxidant Power (FRAP), 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS), and Oxygen Radical Scavenging Capacity (ORAC) assays compared to that of nitrohydroxytyrosol (NO2HT) and free HT. New compounds showed variable antioxidant activity depending on the alkyl side chain length; compounds with short chains (2-4 carbon atoms) maintained or even improved the antioxidant activity compared to NO2HT and/or HT, whereas those with longer side chains (6-8 carbon atoms) showed lower activity than NO2HT but higher than HT.

Accelerated separation of GC-amenable lipid classes in plant oils by countercurrent chromatography in the co-current mode.

Triacylglycerols represent the major part (>90%) in most plant oils and have to be eliminated, when the minor compounds such as phytosterols or tocopherols should be analyzed. Here, we used an all liquid-liquid chromatographic technique, countercurrent chromatography (CCC), to fractionate the minor lipids before gas chromatography (GC) analysis. To cover the wide range of polarity of the minor compounds, we used the co-current mode, in which both mobile and stationary phase are pumped through the system. This allowed to elute substances which partitioned almost exclusively in the stationary phase within 90 min. After testing with standard compounds, the method was applied to the separation of sesame oil and sunflower oil samples. The abundant triacylglycerols could be effectively separated from tocopherols, phytosterols, diacylglycerols, and free fatty acids in the samples, and these compounds could be analyzed (after trimethylsilylation) by GC coupled with mass spectrometry. After the enrichment caused by the CCC fractionation, we were also able to identify the tocopherol derivative α-tocomonoenol, which had not been described in sunflower oil before. Also, separation of sesame oil yielded a mixture of the polar compounds sesamin and sesamolin without further impurities.

Comparison of different classification methods for analyzing electronic nose data to characterize sesame oils and blends.

An electronic nose (e-nose) was used to characterize sesame oils processed by three different methods (hot-pressed, cold-pressed, and refined), as well as blends of the sesame oils and soybean oil. Seven classification and prediction methods, namely PCA, LDA, PLS, KNN, SVM, LASSO and RF, were used to analyze the e-nose data. The classification accuracy and MAUC were employed to evaluate the performance of these methods. The results indicated that sesame oils processed with different methods resulted in different sensor responses, with cold-pressed sesame oil producing the strongest sensor signals, followed by the hot-pressed sesame oil. The blends of pressed sesame oils with refined sesame oil were more difficult to be distinguished than the blends of pressed sesame oils and refined soybean oil. LDA, KNN, and SVM outperformed the other classification methods in distinguishing sesame oil blends. KNN, LASSO, PLS, and SVM (with linear kernel), and RF models could adequately predict the adulteration level (% of added soybean oil) in the sesame oil blends. Among the prediction models, KNN with k = 1 and 2 yielded the best prediction results.

The relationship of antioxidant components and antioxidant activity of sesame seed oil.

Although sesame seed oil contains high levels of unsaturated fatty acids and even a small amount of free fatty acids in its unrefined flavored form, it shows markedly greater stability than other dietary vegetable oils. The good stability of sesame seed oil against autoxidation has been ascribed not only to its inherent lignans and tocopherols but also to browning reaction products generated when sesame seeds are roasted. Also, there is a strong synergistic effect among these components. The lignans in sesame seed oil can be categorized into two types, i.e. inherent lignans (sesamin, sesamolin) and lignans mainly formed during the oil production process (sesamol, sesamolinol, etc.). The most abundant tocopherol in sesame seed oil is γ-tocopherol. This article reviews the antioxidant activities of lignans and tocopherols as well as the browning reaction and its products in sesame seed and/or its oil. It is concluded that the composition and structure of browning reaction products and their impacts on sesame ingredients need to be further studied to better explain the remaining mysteries of sesame oil.