Chemically defined cytokine-free expansion of human haematopoietic stem cells.

Haematopoietic stem cells (HSCs) are a rare cell type that reconstitute the entire blood and immune systems after transplantation and can be used as a curative cell therapy for a variety of haematological diseases1,2. However, the low number of HSCs in the body makes both biological analyses and clinical application difficult, and the limited extent to which human HSCs can be expanded ex vivo remains a substantial barrier to the wider and safer therapeutic use of HSC transplantation3. Although various reagents have been tested in attempts to stimulate the expansion of human HSCs, cytokines have long been thought to be essential for supporting HSCs ex vivo4. Here we report the establishment of a culture system that allows the long-term ex vivo expansion of human HSCs, achieved through the complete replacement of exogenous cytokines and albumin with chemical agonists and a caprolactam-based polymer. A phosphoinositide 3-kinase activator, in combination with a thrombopoietin-receptor agonist and the pyrimidoindole derivative UM171, were sufficient to stimulate the expansion of umbilical cord blood HSCs that are capable of serial engraftment in xenotransplantation assays. Ex vivo HSC expansion was further supported by split-clone transplantation assays and single-cell RNA-sequencing analysis. Our chemically defined expansion culture system will help to advance clinical HSC therapies.

Inhalable Textile Microplastic Fibers Impair Airway Epithelial Differentiation.

Rationale: Microplastics are a pressing global concern, and inhalation of microplastic fibers has been associated with interstitial and bronchial inflammation in flock workers. However, how microplastic fibers affect the lungs is unknown. Objectives: Our aim was to assess the effects of 12 × 31 µm nylon 6,6 (nylon) and 15 × 52 µm polyethylene terephthalate (polyester) textile microplastic fibers on lung epithelial growth and differentiation. Methods: We used human and murine alveolar and airway-type organoids as well as air-liquid interface cultures derived from primary lung epithelial progenitor cells and incubated these with either nylon or polyester fibers or nylon leachate. In addition, mice received one dose of nylon fibers or nylon leachate, and, 7 days later, organoid-forming capacity of isolated epithelial cells was investigated. Measurements and Main Results: We observed that nylon microfibers, more than polyester, inhibited developing airway organoids and not established ones. This effect was mediated by components leaching from nylon. Epithelial cells isolated from mice exposed to nylon fibers or leachate also formed fewer airway organoids, suggesting long-lasting effects of nylon components on epithelial cells. Part of these effects was recapitulated in human air-liquid interface cultures. Transcriptomic analysis revealed upregulation of Hoxa5 after exposure to nylon fibers. Inhibiting Hoxa5 during nylon exposure restored airway organoid formation, confirming Hoxa5's pivotal role in the effects of nylon. Conclusions: These results suggest that components leaching from nylon 6,6 may especially harm developing airways and/or airways undergoing repair, and we strongly encourage characterization in more detail of both the hazard of and the exposure to microplastic fibers.

Dynamic upregulation of the rate-limiting enzyme for valerolactam biosynthesis in Corynebacterium glutamicum.

Valerolactam is a monomer used to manufacture high-value nylon-5 and nylon-6,5. However, the biological production of valerolactam has been limited by the inadequate efficiency of enzymes to cyclize 5-aminovaleric acid to produce valerolactam. In this study, we engineered Corynebacterium glutamicum with a valerolactam biosynthetic pathway consisting of DavAB from Pseudomonas putida to convert L-lysine to 5-aminovaleric acid and ß-alanine CoA transferase (Act) from Clostridium propionicum to produce valerolactam from 5-aminovaleric acid. Most of the L-lysine was converted into 5-aminovaleric acid, but promoter optimization and increasing the copy number of Act were insufficient to significantly improve the titer of valerolactam. To eliminate the bottleneck at Act, we designed a dynamic upregulation system (a positive feedback loop based on the valerolactam biosensor ChnR/Pb). We used laboratory evolution to engineer ChnR/Pb to have higher sensitivity and a higher dynamic output range, and the engineered ChnR-B1/Pb-E1 system was used to overexpress the rate-limiting enzymes (Act/ORF26/CaiC) that cyclize 5-aminovaleric acid into valerolactam. In glucose fed-batch culture, we obtained 12.33 g/L valerolactam from the dynamic upregulation of Act, 11.88 g/L using ORF26, and 12.15 g/L using CaiC. Our engineered biosensor (ChnR-B1/Pb-E1 system) was also sensitive to 0.01-100 mM caprolactam, which suggests that this dynamic upregulation system can be used to enhance caprolactam biosynthesis in the future.

Beyond nylon 6: polyamides via ring opening polymerization of designer lactam monomers for biomedical applications.

Ring opening polymerization (ROP) of lactams is a highly efficient and versatile method to synthesize polyamides. Within the last ten years, significant advances in polymerization methodology and monomer diversity are ushering in a new era of polyamide chemistry. We begin with a discussion of polymerization techniques including the most widely used anionic ring opening polymerization (AROP), and less prevalent cationic ROP and enzyme-catalyzed ROP. Next, we describe new monomers being explored for ROP with increased functionality and stereochemistry. We emphasize the relationships between composition, structure, and properties, and how chemists can control composition and structure to dictate a desired property or performance. Finally, we discuss biomedical applications of the synthesized polyamides, specifically as biomaterials and pharmaceuticals, with examples to include as antimicrobial agents, cell adhesion substrates, and drug delivery scaffolds.

Effects of reaction conditions on the wet oxidation of excess sludge from the caprolactam wastewater treatment process.

In this study, wet oxidation of excess sludge from the caprolactam wastewater treatment process was investigated. The effects of reaction conditions, including sludge concentration, the amount of sludge, reaction temperature and time and the oxygen supply amount, were discussed. The highest removal rates of chemical oxygen demand (COD) and volatile suspended solid (VSS) that can be attained at 78.6 and 89.3% were acquired separately under 260 °C for 60 min with an initial oxygen gas pressure of 1.3 MPa. The sludge was hydrolyzed and oxidized under hydrothermal conditions, producing small molecule organic acids, such as acetic, formic and oxalic acids, as the main products, which could be used as carbon sources for wastewater treatment. These results indicated that wet oxidation provides a favourable and feasible alternative method for the treatment of excess sludge from the coal chemical industry.

Redesigned Hybrid Nylons with Optical Clarity and Chemical Recyclability.

Aliphatic polyamides, or nylons, are typically highly crystalline and thermally robust polymers used in high-performance applications. Nylon 6, a high-ceiling-temperature (HCT) polyamide from ε-caprolactam, lacks expedient chemical recyclability, while low-ceiling temperature (LCT) nylon 4 from pyrrolidone exhibits complete chemical recyclability, but it is thermally unstable and not melt-processable. Here, we introduce a hybrid nylon, nylon 4/6, based on a bicyclic lactam composed of both HCT ε-caprolactam and LCT pyrrolidone motifs in a hybridized offspring structure. Hybrid nylon 4/6 overcomes trade-offs in (de)polymerizability and performance properties of the parent nylons, exhibiting both excellent polymerization and facile depolymerization characteristics. This stereoregular polyamide forms nanocrystalline domains, allowing optical clarity and high thermal stability, however, without displaying a melting transition before decomposition. Of a series of statistical copolymers comprising nylon 4/6 and nylon 4, a 50/50 copolymer achieves the greatest synergy in both reactivity and polymer properties of each homopolymer, offering an amorphous nylon with favorable properties, including optical clarity, a high glass transition temperature, melt processability, and full chemical recyclability.

Unraveling Amphiphilic Poly(N-vinylcaprolactam)/Water Interface by Nuclear Magnetic Resonance Relaxometry: Control of Clathrate Hydrate Formation Kinetics.

Water-soluble amphiphilic polymers are vital chemicals in the oil and gas industry to retard crystal growth of hydrocarbon hydrate via surface adsorption and suppress nucleation of a pristine hydrate nucleus, thereby preventing formation of hydrate blockages in flow lines during oil and natural gas production. Apart from a few theoretical modeling studies, an experimental method to study the polymer/water interface in the crystal growth is critically needed. Here, water motions in the hydration shells of an exemplary kinetic inhibitor, poly(N-vinylcaprolactam), during hydrate formation from the tetrahydrofuran/water system are revealed via nuclear magnetic resonance relaxometry. Unequivocal experiments show that the pivotal interfacial water in the tightly bound state gradually freezes at rates depending on the polymer molecular weight (MW). This is supported by nonfreezable water analysis, which is correlated to the inhibition time. The polymers tune the kinetics of the hydration process via interaction with and perturbation of the water molecules. The free water component in the polymer solution crystallizes at a very slow rate when in partially restricted mobility, whereas the bound water component increases in the reaction, with the polymer/water interface serving as the reaction sites. The appropriate MW (including average MW and polydispersity values) of the inhibitive polymers can give rise to maximal retardation of the hydrate crystal growth. This work will help control other multiphase crystallization kinetic processes through the design of inhibitors or promoters functioning in the interface.

Remote Stereoelectronic Effects in Pyrrolidone- and Caprolactam-Substituted Phenols: Discrepancies in Antioxidant Properties Evaluated by Electrochemical Oxidation and H-Atom Transfer Reactivity.

New antioxidants are commonly evaluated via two main approaches, i.e., the ability to donate an electron and the ability to intercept free radicals. We compared these approaches by evaluating the properties of 11 compounds containing both antioxidant moieties (mono- and polyphenols) and auxiliary pharmacophores (pyrrolidone and caprolactam). Several common antioxidants, such as butylated hydroxytoluene (BHT), 2,3,5-trimethylphenol (TMP), quercetin, and dihydroquercetin, were added for comparison. The antioxidant properties of these compounds were determined by their rates of reaction with 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical and their oxidation potentials from cyclic voltammetry. Although these methods test different chemical properties, their results correlate reasonably well. However, several exceptions exist where the two methods give opposite predictions! One of them is the different behavior of mono- and polyphenols: polyphenols can react with DPPH more than an order of magnitude faster than monophenols of a similar oxidation potential. The second exception stems from the size of a "bystander" lactam ring at the benzylic position. Although the phenols with a seven-membered lactam ring are harder to oxidize, the sterically nonhindered compounds react with DPPH about 2× faster than the analogous five-membered lactams. The limitations of computational methods, especially those based on a single parameter, are also evaluated and discussed.

Tailoring Nylon 6/Acrylonitrile-Butadiene-Styrene Nanocomposites for Application against Electromagnetic Interference: Evaluation of the Mechanical, Thermal and Electrical Behavior, and the Electromagnetic Shielding Efficiency.

Nylon 6/acrylonitrile-butadiene-styrene nanocomposites were prepared by mixing in a molten state and injection molded for application in electromagnetic interference shielding and antistatic packaging. Multi-wall carbon nanotubes (MWCNT) and maleic anhydride-grafted ABS compatibilizer were incorporated to improve the electrical conductivity and mechanical performance. The nanocomposites were characterized by oscillatory rheology, Izod impact strength, tensile strength, thermogravimetry, current-voltage measurements, shielding against electromagnetic interference, and scanning electron microscopy. The rheological behavior evidenced a severe increase in complex viscosity and storage modulus, which suggests an electrical percolation phenomenon. Adding 1 to 5 phr MWCNT into the nanocomposites produced electrical conductivities between 1.22 × 10-6 S/cm and 6.61 × 10-5 S/cm. The results make them suitable for antistatic purposes. The nanocomposite with 5 phr MWCNT showed the highest electromagnetic shielding efficiency, with a peak of -10.5 dB at 9 GHz and a value around -8.2 dB between 11 and 12 GHz. This was possibly due to the higher electrical conductivity of the 5 phr MWCNT composition. In addition, the developed nanocomposites, regardless of MWCNT content, showed tenacious behavior at room temperature. The results reveal the possibility for tailoring the properties of insulating materials for application in electrical and electromagnetic shielding. Additionally, the good mechanical and thermal properties further widen the application range.

Dually Responsive Poly(N-vinylcaprolactam)-b-poly(dimethylsiloxane)-b-poly(N-vinylcaprolactam) Polymersomes for Controlled Delivery.

Limited tissue selectivity and targeting of anticancer therapeutics in systemic administration can produce harmful side effects in the body. Various polymer nano-vehicles have been developed to encapsulate therapeutics and prevent premature drug release. Dually responsive polymeric vesicles (polymersomes) assembled from temperature-/pH-sensitive block copolymers are particularly interesting for the delivery of encapsulated therapeutics to targeted tumors and inflamed tissues. We have previously demonstrated that temperature-responsive poly(N-vinylcaprolactam) (PVCL)-b-poly(dimethylsiloxane) (PDMS)-b-PVCL polymersomes exhibit high loading efficiency of anticancer therapeutics in physiological conditions. However, the in-vivo toxicity of these polymersomes as biocompatible materials has not yet been explored. Nevertheless, developing an advanced therapeutic nanocarrier must provide the knowledge of possible risks from the material's toxicity to support its future clinical research in humans. Herein, we studied pH-induced degradation of PVCL10-b-PDMS65-b-PVCL10 vesicles in-situ and their dually (pH- and temperature-) responsive release of the anticancer drug, doxorubicin, using NMR, DLS, TEM, and absorbance spectroscopy. The toxic potential of the polymersomes was evaluated in-vivo by intravenous injection (40 mg kg-1 single dose) of PVCL10-PDMS65-PVCL10 vesicles to mice. The sub-acute toxicity study (14 days) included gravimetric, histological, and hematological analyses and provided evidence for good biocompatibility and non-toxicity of the biomaterial. These results show the potential of these vesicles to be used in clinical research.

Catalytic and structural properties of ATP-dependent caprolactamase from Pseudomonas jessenii.

Caprolactamase is the first enzyme in the caprolactam degradation pathway of Pseudomonas jessenii. It is composed of two subunits (CapA and CapB) and sequence-related to other ATP-dependent enzymes involved in lactam hydrolysis, like 5-oxoprolinases and hydantoinases. Low sequence similarity also exists with ATP-dependent acetone- and acetophenone carboxylases. The caprolactamase was produced in Escherichia coli, isolated by His-tag affinity chromatography, and subjected to functional and structural studies. Activity toward caprolactam required ATP and was dependent on the presence of bicarbonate in the assay buffer. The hydrolysis product was identified as 6-aminocaproic acid. Quantum mechanical modeling indicated that the hydrolysis of caprolactam was highly disfavored (ΔG0 '= 23 kJ/mol), which explained the ATP dependence. A crystal structure showed that the enzyme exists as an (αß)2 tetramer and revealed an ATP-binding site in CapA and a Zn-coordinating site in CapB. Mutations in the ATP-binding site of CapA (D11A and D295A) significantly reduced product formation. Mutants with substitutions in the metal binding site of CapB (D41A, H99A, D101A, and H124A) were inactive and less thermostable than the wild-type enzyme. These residues proved to be essential for activity and on basis of the experimental findings we propose possible mechanisms for ATP-dependent lactam hydrolysis.

Improving viral filtration capacity in biomanufacturing processes using aggregate binding properties of polyamide-6,6.

Virus retention filtration is a common step in modern biopharmaceutical manufacturing as it enables efficient removal of potential adventitious and endogenous viruses via size exclusion. Modern parvovirus retention filters have significantly improved fluxes and parvovirus retention in comparison to earlier versions of these filters. However, these filters may be more susceptible to premature fouling and require more effort for process optimization. Here, we demonstrate that polyamide-6,6 (nylon-6,6) membranes when used as prefilters can increase the capacity of these Parvovirus retentive filters that are less susceptible to premature fouling. We found that the mechanism of polyamide-mediated filtration improvement can be explained by the binding of monoclonal antibody (mAb) aggregates with a diameter of 20-100 nm, and we show that this mechanism is shared by other types of adsorptive prefilters. Finally, by the combination of mobile phase screening, additive spiking, and molecular dynamics simulations, we show that polyamide-6,6 removes mAb aggregates through hydrophobic interactions making its design space potentially complementary to other available prefilters. Our studies support the aggregate-mediated mechanism of flux decay during viral filtration and suggest that polyamide-6,6 could be considered as an alternative cost-effective option to extend the capacity of viral filters.

Activity, stability, and binding capacity of ß-galactosidase immobilized on electrospun nylon-6 fiber membrane.

In this research, we explored various immobilized enzyme support materials, including the novel nylon-6 fiber membrane (NFM), and evaluated the increase in surface area and its effect on enzyme binding potential. We also manipulated incubation and reaction conditions and assessed the subsequent effects on activity and stability of ß-galactosidase, with comparisons between various solid support materials and free (dissolved) enzyme. Nylon-6 fiber membranes were created by electrospinning and were compared with other materials as solid supports for enzyme binding. The other materials included polyvinylidene fluoride 5-kDa nanofiltration dairy membranes, nylon-6 pellets, and silica glass beads. Scanning electron microscopy revealed the large surface area of NFM, which correlated with greater enzyme activity compared with the relatively flatter surfaces of the other solid support materials. Enzyme activity was measured spectrophotometrically with the color-changing substrate o-nitrophenyl-ß-d-galactopyranoside. Compared with the other solid supports, NFM had greater maximum enzyme binding potential. Across pH conditions ranging from 3.5 to 6.0 (including the optimal pH of 4.0-5.0), enzyme activity was maintained on the membrane-immobilized samples, whereas free enzyme did not maintain activity. Altering the storage temperature (4, 22, and 50°C) affected enzyme stability (i.e., the ability of the enzyme to maintain activity over time) of free and polyvinylidene fluoride membrane samples. However, NFM samples maintained stability across the varying storage temperatures. Increasing the immobilization solution enzyme concentration above the maximum enzyme binding capacity had no significant effect on enzyme stability for membrane-immobilized samples; however, both had lower mean stability than free enzyme by approximately 74%. With further development, ß-galactosidase immobilized on NFM or other membranes could be used in continuous processing in the dairy industry for a combination of filtration and lactose hydrolysis-creating products that are reduced in lactose and increased in sweetness, with no requirement for "added sugars" on the nutrition label and no enzyme listed as final product ingredient.

Preparation of a bacterial flocculant by using caprolactam as a sole substrate and its application in amoxicillin removal.

High cost is one of the limiting factors in the industrial production of bioflocculant. Simultaneous preparation of bioflocculant from the contaminants in wastewater was considered as a potential approach to reduce the production cost. In this study, caprolactam was verified as sole feedstock for the growth of strain Alcaligenes faecalis subsp. phenolicus ZY-16 in batch experiments. Chemical analysis showed that the as-prepared MBF-16 consisted of heteropolysaccharides (88.3%) and peptides (9.4%). XPS result indicated the plentiful acylamino, hydroxyl and amino groups in MBF-16, which have an indispensable role in amoxicillin flocculation. The flocculation of amoxicillin can be well stimulated by Freundlich isotherm equation, and the Kf was up to 178.6524 for amoxicillin. The kinetic fitting results proved that the flocculation of amoxicillin by MBF-16 was chemisorbed. This contribution may develop a novel technology for the preparation of bacterial flocculants that can consume toxic substrates (caprolactam) and have potential applications in amoxicillin removal.

Thermochemistry of Solution, Solvation, and Hydrogen Bonding of Cyclic Amides in Proton Acceptor and Donor Solvents. Amide Cycle Size Effect.

In the present work, the thermochemistry of solution, solvation, and hydrogen bonding of cyclic amides in proton acceptor (B) and proton donor (RXH) solvents were studied. The infinite dilution solution enthalpies of δ-valerolactam, N-methylvalerolactam, ε-caprolactam, and N-methylcaprolactam were measured at 298.15 K. The solvation enthalpies of cyclic amides were calculated based on the measured solution enthalpies and sublimation/vaporization enthalpies from literature. The enthalpies of hydrogen bonding between cyclic amides and proton acceptor and donor solvents were then calculated as a difference between the total solvation enthalpy and the non-specific contribution. The latter was estimated via two different approaches in proton donor and proton accepting solvents. The effect of the cycle size on the strength of hydrogen bonding of the cyclic amides in solution is discussed.

Thermoreversible Switchlike Electrocatalytic Reduction of Tizanidine Based on a Graphene Oxide Tethered Stimuli-Responsive Smart Surface Supported Pd Catalyst.

In this work, a graphene oxide (GRO)-based temperature-sensitive smart catalytic support material was developed by tethering biodegradable and hydrophilic poly(N-vinylcaprolactam) (PVCL) on a GRO (i.e., GRO-PVCL) surface. GRO-PVCL-supported palladium catalyst (i.e., Pd/GRO-PVCL) was then prepared for tizanidine (TZN) electroreduction. The impact of a temperature-sensitive smart surface on the electrochemical and electrocatalytic properties was examined. Moreover, when the large surface area, excellent electron transfer, and electrochemical catalysis abilities of GRO were combined with the responsive characteristics of PVCL, temperature-triggered reversible electrocatalysis of TZN with enhanced sensitivity has been proved. Results designated that GRO-PVCL exposed the hydrophilic surface at 20 °C, resulting in Pd NPs highly dispersed on the GRO-PVCL surface. Subsequently, the wettability of the Pd catalyst surface arbitrarily adapted to hydrophobicity at 40 °C, which highly enhanced the TZN reduction on the catalyst in electrochemical detection. The synergistic effect amid Pd and GRO-PVCL on Pd/GRO-PVCL improved the electrocatalytic activity of TZN. The detection of TZN with the Pd/GRO-PVCL modified electrode ranged from 0.02 to 276 µM with a low detection limit of 0.0015 µM at 40 °C. The Pd/GRO-PVCL modified electrode also possesses excellent stability, reproducibility, and anti-interference ability. Lastly, the modified electrode attained good recovery results in human urine and human plasma samples for the determination of TZN and also pharmacokinetics study in rat plasma.

Glucose and Maltose Surface-Functionalized Thermoresponsive Poly(N-Vinylcaprolactam) Nanogels.

Soft nanoparticles are interesting materials due to their size, deformability, and ability to host guest molecules. Surface properties play an essential role in determining the fate of the particles in biological medium, and coating of the nanoparticles (and polymers) with carbohydrates has been found to be an efficient strategy for increasing their biocompatibility and fine-tuning other important properties such as aqueous solubility. In this work, soft nanogels of poly(N-vinylcaprolactam), PNVCL, were surface-functionalized with different glucose and maltose ligands, and the colloidal properties of the gels were analyzed. The PNVCL nanogels were first prepared via semibatch precipitation polymerization, where a comonomer, propargyl acrylate (PA), was added after preparticle formation. The aim was to synthesize "clickable" nanogels with alkyne groups on their surfaces. The nanogels were then functionalized with two separate azido-glucosides and azido-maltosides (containing different linkers) through a copper-catalyzed azide-alkyne cycloaddition (CuAAc) click reaction. The glucose and maltose bearing nanogels were thermoresponsive and shrank upon heating. Compared to the PNVCL-PA nanogel, the carbohydrate bearing ones were larger, more hydrophilic, had volume phase transitions at higher temperatures, and were more stable against salt-induced precipitation. In addition to investigating the colloidal properties of the nanogels, the carbohydrate recognition was addressed by studying the interactions with a model lectin, concanavalin A (Con A). The binding efficiency was not affected by the temperature, which indicates that the carbohydrate moieties are located on the gel surfaces, and are capable of interacting with other biomolecules independent of temperature. Thus, the synthesis produces nanogels, which have surface functions capable of biorelevant interactions and a thermoresponsive structure. These types of particles can be used for drug delivery.

A Spirocyclic Parabanic Acid Masked N-Heterocyclic Carbene as Thermally Latent Pre-Catalyst for Polyamide 6 Synthesis and Epoxide Curing.

1,3-Dicyclcohexyl-6,9-dimethyl-1,3,6,9-tetraazaspiro[4.4]non-7-ene-2,4-dione, a spirocyclic parabanic acid derivative of N,N-dimethylimidazole, is used as thermally latent, protected N-heterocyclic carbene (NHC) in polymerizing anhydride-cured epoxide resins, and azepan-2-one, respectively. The protected carbene is synthesized from 1,3-dimethylimidazolium-2-carboxylate in the presence of two equivalents of cyclohexyl isocyanate. In the synthesis of epoxide resin thermosets, this class of latent NHC allows the production of fast and fully cured materials with high crosslinking content. Fast and complete conversion is found in the anionic ring opening polymerization (AROP) of azepan-2-one (ε-caprolactam, CLA) with and without additional activators.

The Role of α, γ, and Metastable Polymorphs on Electrospun Polyamide 6/Functionalized Graphene Oxide.

The present paper describes the addition of nitroxide-functionalized graphene oxide (GOFT) into polyamide 6 (PA6) micro- and nanofibers, which are obtained through electrospinning. Scanning electron microscopy micrographs demonstrate the presence of fibers. Tensile testing presents an unexpected and non-obvious behavior, in which the Young's modulus, tensile strength, and elongation simultaneously and remarkably increase compared to the pristine polymer nanofibers. GOFT induces the hydrogen bonding between the NH group from PA6 with the functional groups, thus promoting higher crystallinity of the polymer matrix. Nonetheless, deconvoluted curves by differential scanning calorimetry reveal the presence of two quasi-steady polymorphs (ß and Î´ phases) contributing to 46% of the total crystallinity. This evidence suggests that their presence and high ratios are responsible for the unexpected and simultaneous enhancement of tensile properties.

The role of osmolytes in the temperature-triggered conformational transition of poly(N-vinylcaprolactam): an experimental and computational study.

Biomedical industries are widely exploring the use of thermo-responsive polymers (TRPs) in the advanced development of drug delivery and in many other pharmaceutical applications. There is a great need to investigate the use of less toxic and more (bio-)compatible TRPs employing several additives, which could modify the conformational transition behavior of TRPs in aqueous solution. To move forward in this aspect, we have chosen the less toxic bio-based polymer poly(N-vinylcaprolactam) (PVCL) and three different methylamine-based osmolytes, trimethylamine N-oxide (TMAO), betaine and sarcosine, in order to investigate their particular interactions with the polymer segments in PVCL and therefore the corresponding changes in the thermo-responsive conformational behavior. Several biophysical techniques, UV-visible spectroscopy, fluorescence spectroscopy, dynamic light scattering (DLS) and laser Raman spectroscopy, as well as classical computer simulation methods such as molecular dynamics are employed in the current work. All the studied methylamines are found to favor the hydrophobic collapse of the polymer thus stabilizing the globular state of PVCL. Sarcosine is observed to cause the maximum decrease in lower critical solution temperature (LCST) of PVCL followed by TMAO and then betaine. The differences observed in the LCST values of PVCL in the presence of these molecules can be attributed to the different polymer-osmolyte interactions. The less sterically hindered N atom in the case of sarcosine causes a significant difference in the phase transition temperature values of PVCL compared to betaine and TMAO, where the nitrogen atom is buried by three methyl groups attached to it.