Touchpad-based immunochromatographic strip for detecting the skin surface proteins.

This study demonstrates, for the first time, the proof-of-concept of a novel immunosensor, a touchpad-based immunochromatographic strip, that non-invasively extracts and detects skin surface proteins. The strip was composed of a nitrocellulose membrane at the center, where a spot of anti-human IgG capture antibody was physically adsorbed. The capture antibody spot was covered with a glass fiber membrane impregnated with phosphate-buffered saline (PBS) to extract skin surface proteins, avoiding direct contact of the human skin with the capture antibodies. Skin surface IgG was detected in two steps: (1) touching the capture antibody via a glass fiber membrane containing PBS, and (2) dipping the strip into the Au-nanoparticle-labeled secondary antibody to visualize the existence of the captured skin surface IgG on the strip. We qualitatively demonstrated that using a very small amount of PBS while maintaining contact with the skin, skin surface proteins can be concentrated and detected, even with a relatively low-sensitivity immunochromatographic chip. This sensor is expected to be a potential biosensor for the non-invasive diagnosis of the integrity of human skin.

Elaboration, Characterization and Thermal Decomposition Kinetics of New Nanoenergetic Composite Based on Hydrazine 3-Nitro-1,2,4-triazol-5-one and Nanostructured Cellulose Nitrate.

This research aims to develop new high-energy dense ordinary- and nano-energetic composites based on hydrazine 3-nitro-1,2,4-triazol-5-one (HNTO) and nitrated cellulose and nanostructured nitrocellulose (NC and NMCC). The elaborated energetic formulations (HNTO/NC and HNTO/NMCC) were fully characterized in terms of their chemical compatibility, morphology, thermal stability, and energetic performance. The experimental findings implied that the designed HNTO/NC and HNTO/NMCC formulations have good compatibilities with attractive characteristics such as density greater than 1.780 g/cm3 and impact sensitivity around 6 J. Furthermore, theoretical performance calculations (EXPLO5 V6.04) displayed that the optimal composition of the as-prepared energetic composites yielded excellent specific impulses and detonation velocities, which increased from 205.7 s and 7908 m/s for HNTO/NC to 209.6 s and 8064 m/s for HNTO/NMCC. Moreover, deep insight on the multi-step kinetic behaviors of the as-prepared formulations was provided based on the measured DSC data combined with isoconversional kinetic methods. It is revealed that both energetic composites undergo three consecutive exothermic events with satisfactory activation energies in the range of 139-166 kJ/mol for HNTO/NC and 119-134 kJ/mol for HNTO/NMCC. Overall, this research displayed that the new developed nanoenergetic composite based on nitrated cellulose nanostructure could serve as a promising candidate for practical applications in solid rocket propellants and composite explosives.

Simultaneously targeting nitrocellulose and antibody by a dual-headed protein.

Immobilizing antibodies on the nitrocellulose membrane is an important step to increase the sensitivity of the Lateral Flow Test strip for detecting pathogenic antigen. In our research, the fusion protein between nitrocellulose-binding anchor protein 3-Helix - a protein that has a strong affinity to nitrocellulose membrane and protein A - a protein that can bind to the Fc tail of IgG antibody was generated. This fusion protein was expected to help IgG antibodies to be more strongly binding and oriented immobilized onto the nitrocellulose membrane. The recombinant vector pET22b-proA and pET22b-proA-3-Helix coded for protein A and protein A-3-Helix were cloned. These proteins were overexpressed in BL21 and purified by immobilized metal affinity chromatography with purity above 90%. The purified protein was used to evaluate the orientation binding on nitrocellulose membranes by lateral flow challenge. Results showed that protein A-3-Helix binding to nitrocellulose membrane was better than that of protein A. The former protein increased antibody binding and stereochemical immobilizing onto nitrocellulose membrane compared to its protein A counterpart. In summary, we have succeeded in cloning, purifying, and characterizing a dual-head recombinant protein A and protein A-3-Helix. The results show the potential application of protein A-3-Helix in the immobilizing antibody on the test strip.

DNA immobilization and detection using DNA binding proteins.

The immobilization of sensing bioreceptors is a critical feature affecting the final performance of a biosensor. For DNA detection, the (strept)avidin-biotin affinity interaction is often used for the immobilization of biotin-labeled oligonucleotides or PCR amplicons. Herein, DNA binding proteins are proposed as alternative universal anchors for both DNA immobilization and detection, based on the strong and specific affinity interaction between certain DNA binding proteins and their respective dsDNA binding sites. These binding sites can be incorporated in the target DNA molecule during synthesis and by PCR, eliminating the need for post-synthesis chemical modification and resulting in lower costs. When scCro DNA binding protein was immobilized on microplates and nitrocellulose membrane, both ssDNA and dsDNA targets were successfully detected. The detection limits achieved were similar to those obtained with the streptavidin-biotin system. However, the scCro system resulted in higher signals while using less amount of protein. The adsorption properties of scCro were superior to streptavidin's, making scCro a viable alternative as an anchor biomolecule for the development of DNA assays and biosensors. Finally, a nucleic acid lateral flow assay based solely on two different DNA binding proteins, scCro and dHP, was developed for the detection of a PCR amplicon. Overall, the proposed system appears to be very promising and with potential use for multiplex detection using various DNA binding proteins with different sequence specificities. Further work is required to better understand the adsorption properties of these biomolecules on nitrocellulose, optimize the assays comprehensively, and achieve improved sensitivities.

Development of rapid gold nanoparticles based lateral flow assays for simultaneous detection of Shigella and Salmonella genera.

Salmonella and Shigella genera are common pathogens that contaminate foods and beverages. Lateral flow assays (LFA) are commonly used to detect these pathogens. However, most of the developed LFAs are for single detection. Simultaneous detection of pathogens is required to reduce cost and time. In this work, 40 nm gold nanoparticles (AuNPs) were synthesized using the seeding growth method as labeling agent. The AuNPs were characterized and conjugated with mouse anti-Gram negative endotoxin antibody. The nitrocellulose membrane HF135 was immobilized with anti-mouse IgG antibody as a control line and two separate test lines with either anti-Shigella or anti-Salmonella antibody, respectively. Color intensity of test lines was observed for positive samples. A milk sample was used as proof of concept to mimic actual contamination. The limit of detection of the LFA was 3.0 × 106 CFU/mL for multiplex detection of Shigella flexneri and Salmonella Typhi and for both single detections. The result was comparable with the enzyme-linked immunosorbent assay (ELISA) analysis. The produced LFA could differentiate between Shigella flexneri, Shigella boydii, Salmonella Enteritidis, and Salmonella Typhi. The developed LFA was able to identify Shigella flexneri and Salmonella Typhi with good sensitivity in milk samples, thus, beneficial to ensure the safety of food before entering the market.

Simultaneous Detection of Serum Glucose and Glycated Albumin on a Paper-Based Sensor for Acute Hyperglycemia and Diabetes Mellitus.

Diabetes mellitus is one of the most common chronic diseases worldwide. Generally, the levels of fasting or postprandial blood glucose and other biomarkers, such as glycated albumin, glycated hemoglobin, and 1,5-anhydroglucitol, are used to diagnose or monitor diabetes progression. In the present study, we developed a sensor to simultaneously detect the glucose levels and glycation ratios of human serum albumin using a lateral flow assay. Based on the specific enzymatic reactions and immunoassays, a spiked glucose solution, total human serum albumin, and glycated albumin were measured simultaneously. To test the performance of the developed sensor, clinical serum samples from healthy subjects and patients with diabetes were analyzed. The glucose level and glycation ratios of the clinical samples were determined with reasonable correlation. The R-squared values of glucose level and glycation ratio measurements were 0.932 and 0.930, respectively. The average detection recoveries of the sensor were 85.80% for glucose and 98.32% for the glycation ratio. The glucose level and glycation ratio in our results were crosschecked with reference diagnostic values of diabetes. Based on the outcomes of the present study, we propose that this novel platform can be utilized for the simultaneous detection of glucose and glycation ratios to diagnose and monitor diabetes mellitus.

Virus-based SELEX (viro-SELEX) allows development of aptamers targeting knotty proteins.

It has been 100 years since the worst flu (Spanish flu) mankind has ever experienced. Rapid, accurate diagnosis and subtyping of flu are still an urgent unmet medical need. By using surrogate virus-based SELEX (viro-SELEX), we report here multiple advances incorporated into the field of flu diagnostics: (i) aptamers that can bind to the native virus well even though they cannot bind strongly to a recombinant protein (hemagglutinin); (ii) a couple of aptamers that can target a broad range of strains belonging to the H1N1 subtype and detect only the H1N1 subtype and nothing else; (iii) a highly sensitive lateral flow assay system (limit of detection is 0.08 HAU) using fluorescence-tagged aptamers. The viro-SELEX method of aptamer selection in conjunction with a fluorescent tag on aptamers is a very useful approach to develop highly sensitive, specific, portable, rapid, and quantitative point-of-care testing diagnostic tools for the future.

Direct analysis of lateral flow immunoassays for deoxynivalenol using electrospray ionization mass spectrometry.

Lateral flow immunoassays (LFIAs) are widely used for rapid food safety screening analysis. Thanks to simplified protocols and smartphone readouts, LFIAs are expected to be increasingly used on-site, even by non-experts. As a typical follow-up in EU regulatory settings, suspect samples are sent to laboratories for confirmatory analysis by liquid chromatography-tandem mass spectrometry (LC-MS/MS). However, re-analysis by LC-MS/MS is laborious and time-consuming. In this work, an identification LFIA (ID-LFIA) approach followed by quadrupole-orbitrap MS or triple quadrupole MS/MS analysis is presented. As a proof of concept, a dedicated ID-LFIA strip was developed for the mycotoxin deoxynivalenol (DON) following its initial screening by a commercial smartphone LFIA. The ID-LFIA strip can be simply immersed in the same sample extract used for the smartphone LFIA screening, and next, DON is retrieved from the monoclonal antibody with a dissociation solution consisting of methanol/ammonia. The solution thus obtained was analyzed directly in MS in order to rapidly confirm the presence of DON and any cross-reacting species. The protocol developed is capable of coping with severe ion suppression caused by LFIA buffers and nitrocellulose substrate residues. Initial analysis of blank, spiked, and incurred samples showed that the newly developed ID-LFIA-MS method was able to confirm the presence or absence of mycotoxins in the samples previously analyzed by LFIA and also differentiate between DON and DON 3-glucoside yielding the positive screening result. The concept and technique developed are envisaged to complement on-site screening and confirmation of any low molecular weight contaminant in future food control frameworks. Graphical abstract.

Electrospun nitrocellulose membrane for immunochromatographic test strip with high sensitivity.

The main goal of this work is to develop an economical, portable, disposable, and reliable point of care paper biosensor based on visualization, which can be used to detect viruses, bacteria, and proteins. However, the sensitivity of immunochromatography test (ICT) strips based on nitrocellulose to target detection has always been a problem. Here, we use an electrospun nitrocellulose (ENC) fiber membrane instead of traditional nitrocellulose fiber membrane to construct ICT strips for early pregnancy detection. By proper selection of the diameter of the ENC fiber to adjust the pore size, porosity, and morphology of the membrane, ICT strips with low flow rate and high protein loading were obtained. Based on these properties, a convenient and sensitive method for the colorimetric determination of human chorionic gonadotropin was developed. Under the optimal conditions, the detection limit of ICT based on ENC membrane is 10 mIU mL-1 (S/N = 3), the linear detection range is 5-1000 mIU mL-1, and the linear relationship is Y = 0.0434 X - 0.0136 (R2 = 0.9802). In addition, the test strip has good specificity and stability, and will not produce false-positive results. Graphical abstract.

Novel approach using activated cellulose film for efficient immobilization of purified diamine oxidase to enhance enzyme performance and stability.

The presence of various contaminants in foodstuffs has led to serious public health concerns. Diamine oxidase (DAO) has attracted tremendous attention for guarding food safety as well as clinical and environmental industries. In this study, DAO from Pisum sativum (Pea) seedlings was extracted and purified by dialysis and gel filtration. Purified DAO was covalently immobilized onto the surface of nitrocellulose membrane using glutaraldehyde. The obtained bioaffinity support has efficiently shown high yield immobilization of DAO from pea seedlings. The optimal conditions of free and immobilized DAO activity were evaluated against the substrate, Putrescine dihydrochloride. The influence of pH, temperature, storage stability, and reusability of immobilized enzyme with comparison to the free enzyme was studied and the results showed that the stabilities were significantly enhanced compared with free counterpart. Residual activity of the immobilized enzyme was 59% of the initial activity after being recycled 10 times. We approve that this novel low cost immobilized DAO carrier presents a new approach in large scale applications.

Experimental Study of Pyrolysis and Laser Ignition of Low-Vulnerability Propellants Based on RDX.

Low-vulnerability propellants are propellants designed to resist unintended stimuli to increase safety during transport, storage and handling. The substitution of usual nitrocellulose-based gun propellants with these new materials allows maintaining interior ballistics performances while increasing the safety. In this paper, the pyrolysis, ignition and combustion of such propellants are investigated in order to study conditions leading to a safe and reproducible ignition. Low-vulnerability propellants studied are made of different ratios of hexogen (RDX) and nitrocellulose (NC). Three compositions are studied by varying weight percentages of RDX and NC: 95-5, 90-10 and 85-15 for respective weight percentages of RDX-NC. Pyrolysis of these propellants is studied with two different experimental setups: a flash pyrolysis device linked to a gas chromatograph coupled to a mass spectrometer (Py-GC-MS) and a closed-volume reactor coupled to a mass spectrometer. Different molecules, like NO2, CO, CH3COCH3 or CH2NCH2NCH2, are obtained during the decomposition of these propellants. Laser ignition of these propellants is studied in a cylindrical closed-volume reactor using a laser diode. Several combustion characteristics, such as ignition delays, maximal overpressures and combustion rates are given for the three propellants using the pressure signals. Moreover, ignition energies are also investigated. Obtained results are compared to the few available literature data. A particular behavior is noticed for the 90-10 propellant. The experimental data collected should serve in the future to have a better understanding of the chemical reactions driving the combustion process of these low-vulnerability propellants.

Enhancing the Sensitivity of Lateral Flow Immunoassay by Centrifugation-Assisted Flow Control.

Lateral flow immunoassay (LFIA) is widely used but is limited by its sensitivity. In this study, a novel centrifugation-assisted lateral flow immunoassay (CLFIA) was proposed that had enhanced sensitivity compared to traditional LFIA based on test strips. For CLFIA, a vaulted piece of nitrocellulose membrane was prepared and inserted into a centrifugal disc. Powered by the centrifugal force, the sample volume on the disc was not limited and the flow rate of the reaction fluid was steady and adjustable at different rotation speeds. It was found that lower rotation speeds and larger sample volumes resulted in greater signal intensity in the nitrocellulose membrane as well as higher sensitivity, indicating that the actively controlled flow on the disc allowed for sensitivity enhancement of CLFIA. To operate CLFIA on the centrifugal disc, a portable and cost-effective operating device was constructed to rotate the disc with a stepper motor and collect the results with a smartphone. The proposed method was successfully applied to detect prostate specific antigen (PSA) in human serum. Standard curves were established for CLFIA and LFIA, and both had correlation coefficients of up to 0.99. Under optimal conditions (1500 rpm rotation speed, 120 µL sample volume), the detection limit of CLFIA reached 0.067 ng/mL, showing a 6.2-fold improvement in sensitivity compared to that of LFIA. With clinical serum samples, a good correlation was observed between PSA concentrations measured by CLFIA and by a bulky commercial instrument in hospital. In summary, this portable, cost-effective, and easy-to-use system holds great promise for biomarker detection with enhanced sensitivity compared to traditional LFIA.

A paper microfluidics-based fluorescent lateral flow immunoassay for point-of-care diagnostics of non-communicable diseases.

In the emergency diagnosis of patients, acute myocardial infarction (AMI) is always time-consuming to diagnose, and the process requires multiple laboratory procedures, expensive equipment and skilled workers. Herein, we developed an easy-to-use, low-cost and portable fluorescent lateral flow immunoassay based on paper microfluidics for the point-of-care diagnostics of non-communicable diseases. The fluorescent lateral flow immunoassay can produce results in less than 10 minutes, and the limit of detection (LOD) is 0.019 ng ml-1. The slope was linear from 0 to 100 ng ml-1; the equation is y = 0.0342e2.1181x and R2 = 0.9618, which are distinctive features that ensure maximum amplification of the signal and recording of quantitative values by an analyser. The detection sensitivity showed an exceptional increase to 0.01 ng ml-1. Compared with conventional bioassay readers, our analyser shows some advantages to easily, clearly and effectively read data. The present point-of-care test for cardiac troponin I decreases the turnaround time and has a high coefficient of variation even at lower concentrations of troponin. So, the development of lateral flow assay-based point-of-care assays with higher analytical performance for real world samples can decrease the rule-out time for AMI in emergency departments and other fields.

An "OFF-ON" quantum dot-graphene oxide bioprobe for sensitive detection of micrococcal nuclease of Staphylococcus aureus.

Micrococcal nuclease (MNase) is an extracellular endonuclease of Staphylococcus aureus (S. aureus). It digests single stranded nucleic acid. The presence of MNase is the gold standard to identify S. aureus and its content. The present study reports the ultrahigh sensitive and selective fluorescence platform for MNase detection, designed and developed based on the surface energy transfer mechanism. A "proof of concept" is being developed based on monoclonal antibody-conjugated quantum dots (mAb-QDs), wherein mAb-QDs act as donors and graphene oxide (GO) acts as an acceptor. mAb-QDs in close proximity to GO undergo adsorption due to weak affinity between them and this results in fluorescence quenching by the transfer of surface energy from mAb-QDs to GO. During sensing, a much stronger affinity of mAb-QDs towards MNase inhibits the energy transfer to GO and this allows the regaining of fluorescence. Immobilized mAb-QDs on nitrocellulose membrane strips were fabricated and tested for "ON-OFF-ON" sensing of MNase. The limit of detection for fluorescence based assay and strips is found to be 0.3 ng mL-1 and 0.5 ng mL-1, respectively. The developed strips were applied on real samples for the detection of S. aureus.

Vertical flow assays based on core-shell SERS nanotags for multiplex prostate cancer biomarker detection.

Rapid, simultaneous, and sensitive quantification of multiplex prostate biomarkers plays an important role in early diagnosis, especially for obese men and patients. Herein, a surface-enhanced Raman scattering (SERS)-based vertical flow assay (VFA) is presented for simultaneous detection of multiplex prostate cancer biomarkers, such as prostate-specific antigen (PSA), carcinoembryonic antigen (CEA), and alpha-fetoprotein (AFP) on a single test spot. In practice, Raman dyes (RDs) encoded core-shell SERS nanotags instead of conventional gold colloids used in the colorimetric assay are employed in the sensing membrane of SERS based VFAs for multiplex protein detection. Because of the enhanced Raman signal of the core-shell nanostructure and the high surface area to volume ratio (SVR) of the porous sensing membrane, this proposed biosensor shows a wide linear dynamic range (LDR) with detection limits of 0.37, 0.43, and 0.26 pg mL-1 for PSA, CEA, and AFP, respectively, suggesting that this approach can be a good candidate in point of care testing (POCT) for rapid and sensitive biomarker detection and has a huge potential in multiplex analysis and cancer diagnosis.

Immunochromatographic fluorometric determination of clenbuterol with enhanced sensitivity.

A method is described to enhance the sensitivity of an immunochromatographic assay for clenbuterol (CLE) by making use of dually-labeled gold nanoparticles (GNPs), background fluorescence blocking, and immunomagnetic separation. The GNPs were labeled with biotinylated antibody and streptavidin, respectively, and dually labeled GNPs were obtained via the biotin-streptavidin interaction to amplify the detection signal. The fluorescent signal was blocked by dually labeled GNPs and decreased as the dually labeled GNPs aggregation increases on nitrocellulose membrane, which derived from fluorescent polyvinylchloride card. However, fluorescence (measured at excitation/emission wavelengths of 518/580 nm) recovers when CLE reacts with dually labeled GNPs. Immunomagnetic separation was first applied for sample pretreatment. This can offset the matrix effect and improves the sensitivity and accuracy of the assay. Under the optimal conditions, the limits of detection of CLE visually were 0.25 µg·L-1. In addition, clenbuterol can be quantified in swine urine with a 0.03 µg·L-1 detection limit. This is 60-fold lower than current immunochromatography. Response is linear in the 0.06-0.59 µg·L-1 concentration range, and the recoveries from spiked swine urine range from 81 to 115%." Graphical abstract Schematic presentation of the strategies for improving sensitivity of immunochromatographic assay. It includes immunomagnetic separations, dually-labeled gold nanoparticles and background fluorescence blocking. The assay was applied to detect clenbuterol (CLE) in swine urine with an excellent performance.

A vertical flow microarray chip based on SERS nanotags for rapid and ultrasensitive quantification of α-fetoprotein and carcinoembryonic antigen.

A vertical flow microarray chip is described that uses core-shell SERS nanotags as tags for ultrasensitive quantification of the tumor markers α-fetoprotein (AFP) and carcinoembryonic antigen (CEA) by detecting the intensity of the specific Raman bands at 592 cm-1. The nanotags warrant high sensitivity, and the use of porous nitrocellulose warrants a high surface-to-volume ratio. The linear dynamic ranges are 0.1 ng mL-1 - 10 µg mL-1 for both AFP and CEA, and the limits of detection) are 0.27 pg mL-1 and 0.96 pg mL-1, respectively. Quantification is rapid and can be performed without preconcentration. Graphical abstract Schematic representation of a vertical flow microarray chip using AuNBA@Ag SERS nanotags (where NBA stands for Nile blue A) as labels for rapid, ultrasensitive, and simultaneous detection of tumor biomarkers CEA and AFP.

A Self-Contained Chemiluminescent Lateral Flow Assay for Point-of-Care Testing.

Immunoassays whose readouts rely on chemiluminescence are increasingly useful for a broad range of analytical applications, but they are rarely made into point-of-care (POC) format because of the complex reagents required (some reagents have to be stored in low temperatures, and some reagents have to be freshly made right before the assay). This study reports a self-contained chemiluminescent lateral flow assay (CLFA), which prestores all necessary reagents. This CLFA contains three parts: the normal lateral flow assay (LFA) strip, the chemiluminescence substrate pad, and the polycarbonate (PC) holder. On the LFA strip, we simultaneously labeled horseradish peroxidase (HRP) and antibody on the gold nanoparticles (AuNPs) for the conjugate pad. For the substrate pad, we used sodium perborate as the oxidant and lyophilized the chemiluminescence substrate on the glass fiber, which allows long-term storage. After the transfer of substrate from the substrate pad to the nitrocellulose (NC) membrane, we captured the chemiluminescence signal for the quantification of the targets. The HRP on the AuNPs can amplify the chemiluminescence signal efficiently. We used this CLFA system to detect both macromolecules and small molecules successfully. This self-contained and easily processable device is exceedingly appropriate for rapid detection and is a convenient platform for POC testing.

Redefining Molecular Amphipathicity in Reversing the "Coffee-Ring Effect": Implications for Single Base Mutation Detection.

The "coffee ring effect" is a natural phenomenon wherein sessile drops leave ring-shaped structures on the solid surfaces upon drying. It drives a nonuniform deposition of suspended compounds on the substrates, which adversely affects many processes, including surface-assisted biosensing and molecular self-assembly. In this study, we describe how the coffee ring effect can be eliminated by controlling the amphipathicity of the suspended compounds, for example, DNA modified with hydrophobic dye. Specifically, nuclease digestion of the hydrophilic DNA end converts the dye-labeled molecule into an amphipathic molecule (one with comparably weighted hydrophobic and hydrophilic ends) and reverses the coffee ring effect and results in a uniform disk-shaped feature deposition of the dye. The amphipathic product decreases the surface tension of the sessile drops and induces the Marangoni flow, which drives the uniform distribution of the amphipathic dye-labeled product in the drops. As a proof of concept, this strategy was used in a novel enzymatic amplification method for biosensing to eliminate the coffee ring effect on a nitrocellulose membrane and increase assay reliability and sensitivity. Importantly, the reported strategy for eliminating the coffee ring effect can be extended to other sessile drop systems for potentially improving assay reliability and sensitivity.

A bio-inspired photonic nitrocellulose array for ultrasensitive assays of single nucleic acids.

Here we report a bio-inspired photonic nitrocellulose array for ultrasensitive nucleic-acid detection. The patterned photonic nitrocellulose array is inspired by the Stenocara beetle living in the desert, which can collect water on its bumpy back surface from early morning fogs so that spontaneous generation of separated reaction droplets for loop-mediated isothermal amplification (LAMP)-based detection is enabled. Owing to the slow-photon effect of the photonic nitrocellulose, the fluorescence signal of calcein produced during the LAMP reaction can be effectively enhanced (up to 32 fold), which results in dramatically improved sensitivity for the detection of single nucleic acids in 40 min. We demonstrate that Staphylococcus aureus (SA) DNA can be quantitatively detected with a limit-of-detection of 0.60 copy per µL. The consumption of reagents and sample is also remarkably reduced owing to the highly decreased dead volume of the nitrocellulose substrate. Therefore, this bio-inspired photonic nitrocellulose array is promising for carrying out inexpensive, ultrasensitive, and high-throughput nucleic-acid detection under resource-limited settings.