First-in-Man Trial of SiO2 Inert-Coated Bare Metal Stent System in Native Coronary Stenosis　- The AXETIS FIM Trial.

BACKGROUND: A novel bare metal stent with an SiO2coating was developed to prevent excessive neointimal hyperplasia by inertization of the metallic stent surface. The efficacy of the device was demonstrated in a preclinical model. The aim of this first-in-man trial was to assess the safety and feasibility of the new device.Methods and Results:This prospective non-randomized single-arm trial was designed to enroll 35 patients with a de novo coronary lesion. Quantitative coronary angiography and optical coherence tomography (OCT) were performed at the baseline procedure and at the 6-month follow-up. Stent implantation was performed with OCT guidance according to optimal stent implantation criteria. The trial was terminated upon the advice of the data safety monitoring board after enrolling 14 patients due to the high incidence of re-intervention. Optimal OCT implantation criteria were achieved in only 8.3% of lesions. At 6 months, angiographic in-stent late lumen loss as the primary endpoint was 0.77±0.44 mm, and binary restenosis occurred in 33.3% of lesions. At the 6-month OCT, neointimal volume obstruction was 32.8±15.6% with a neointimal thickness of 237±117 µm. At 12 months, the device-oriented composite endpoint (defined as cardiac death, target vessel myocardial infarction, and clinically indicated target lesion revascularization rate) was 33.3%. CONCLUSIONS: In contrast with the preclinical study, the Axetis stent did not efficiently suppress neointimal hyperplasia in humans in this trial.

Effects of Vitamin E-Coated versus Conventional Membranes in Chronic Hemodialysis Patients: A Systematic Review and Meta-Analysis.

INTRODUCTION: Accruing evidence suggests that vitamin E-coated membranes (ViE-m) might improve the clinical management of chronic hemodialysis (HD) patients. METHODS: We conducted a systematic review and meta-analysis of RCTs comparing ViE-m to conventional HD. Endpoints of interest were a series of biomarkers pertaining to anemia status, inflammation, oxidative stress and dialysis efficacy/status. RESULTS: Sixty studies were included. ViE-m significantly improved the Erythropoietin Resistance Index but had no impact on other anemia parameters. As for oxidative stress and inflammation, ViE-m produced a significant decrease in interleukin-6 levels, thiobarbituric acid reactive substances, plasma and red blood cell (RBC) malonylaldehyde and a significant increase in blood and RBC vitamin E. Conversely, ViE-m use had no impact on lipid profile, dialysis adequacy, blood pressure, albumin and uric acid. CONCLUSIONS: ViE-m might ameliorate anemia management by reducing oxidative stress and inflammation. Benefits of these bio-membranes on harder clinical outcomes are uncertain and need to be investigated by future, targeted trials.

Drug-coated balloon treatment of coronary artery disease: a position paper of the Italian Society of Interventional Cardiology.

Drug-coated balloons are a new tool for the treatment of patients with coronary artery disease. The main feature of this technology is a rapid and homogenous transfer of an antiproliferative drug (paclitaxel) to the vessel wall just at the time of balloon inflation, when neointimal proliferation, in response to angioplasty, is the highest. Moreover, drug-coated balloons share adjuntive advantages over stents: the absence of permanent scaffold and polymer, the respect of the original coronary anatomy, and limited inflammatory stimuli, thereby allowing for short-term dual antiplatelet therapy. To this day, a lot of devices are available in the market, with limited scientific data for the vast majority of them. Thus, the Italian scientific society of interventional cardiologists GISE decided to coordinate the efforts of a group of reknown experts on the field, in order to obtain a Position Paper on the correct use of drug-coated balloons in all the settings of coronary artery disease, giving a class of indication to each one, based on the clinical evidence. This Position Paper represents a quick reference for operators, investigators, and manufactures to promote the understanding and the correct use of the drug-coated balloon technology in everyday clinical practice.

Applying the National Institute for Clinical Excellence criteria to patients treated with the Genous™ Bio-engineered R stent™: a sub-study of the e-HEALING (Healthy Endothelial Accelerated Lining Inhibits Neointimal Growth) worldwide registry.

The National Institute for Clinical Excellence (NICE) guidelines recommend the use of bare-metal stents (BMS) in non-complex lesions with a low risk of restenosis (diameter ≥3 mm and lesion length ≤15 mm) and the use of drug-eluting stents (DES) in more complex lesions with a high risk of restenosis (diameter <3.0 mm or lesion length >15 mm). However, the guidelines were created based on studies evaluating BMS and DES only. We performed an analysis of patients undergoing non-urgent percutaneous coronary intervention with the novel endothelial cell capturing stent (ECS). The ECS is coated with CD34(+) antibodies that attract circulating endothelial progenitor cells to the stent surface, thereby accelerating the endothelialization of the stented area. We analyzed all patients enrolled in the worldwide e-HEALING registry that met the NICE criteria for either low-risk or high-risk lesions and were treated with ≥1 ECS. The main study outcome was target vessel failure (TVF) at 12-month follow-up, defined as the composite of cardiac death or MI and target vessel revascularization (TVR). A total of 4,241 patients were assessed in the current analysis. At 12-month follow-up, TVF occurred in 7.0% of the patients with low-risk lesions and in 8.8% of the patients with high-risk lesions (p = 0.045). When evaluating the diabetic patients versus the non-diabetic patients per risk group, no significant differences were found in TVF, MI or TVR in either risk group. The ECS shows good clinical outcomes in lesions carrying either a high or a low risk of restenosis according to the NICE guidelines with comparable rates of cardiac death, myocardial infarction, and stent thrombosis. The TVF rate with ECS was slightly higher in patients with high-risk lesions, driven by higher clinically driven TLR. The risk of restenosis with ECS in patients carrying high-risk lesions needs to be carefully considered relative to other risks associated with DES. Furthermore, the presence of diabetes mellitus did not influence the incidence of TVF in either risk group.

Survival of hard-on-hard bearings in total hip arthroplasty: a systematic review.

BACKGROUND: Improvements in prosthetic materials, designs, and implant fixation for THA have led to bearing surface wear being the limitation of this technology. Hard-on-hard bearings promise decreased wear rates and increased survival. However, there may be different survival rates based on bearing materials, manufacturing technologies, and femoral component designs. Additionally, survival rate variability may be based on study design. QUESTIONS/PURPOSES: We determined survival rates and study levels of evidence and quality for the following bearings: stemmed metal-on-metal THA, metal-on-metal hip resurfacing, ceramic-on-ceramic THA, and ceramic-on-metal THA. METHODS: We performed a systematic review of the peer-reviewed literature addressing THA hard-on-hard bearings. Quality for Level I and II studies was assessed. RESULTS: The four Level I or II second-generation stemmed metal-on-metal THA studies reported between 96% and 100% mean survival at 38 to 60 months. The two Level I hip resurfacing studies reported 94% and 98% mean survival at 56 and 33 months. The four Level I studies of ceramic-on-ceramic THA reported survival from 100% at mean 51 months to 96% at 8 years. CONCLUSIONS: While hard-on-hard bearing survival rates have generally been variable with earlier designs, contemporary implants have demonstrated survival of 95% or greater at followup of between 3 and 10 years. Some variability in survival may be due to differences in surgical technique, component positioning, and implant designs. As bearing designs continue to improve with modified materials and manufacturing techniques, use will increase, especially in young and active patients, though concerns remain about the increased reports of adverse events after metal-on-metal bearings.

Results of the cementless Plasmacup in revision total hip arthroplasty: a retrospective study of 72 cases with an average follow-up of eight years.

BACKGROUND: There are multiple revision implant systems currently available for socket revision in revision total hip arthroplasty. Up until now, not all of these systems have been followed up with regards to their long-term use as a revision implantation.For the first time, this study presents the hemispherical porous-coated socket Plasmacup SC, produced by Aesculap, Tuttlingen, Germany, and the clinical and radiological mid-term results of this revision cup implant. METHODS: Over a period of ten years the Plasmacup SC press-fit-cup was used as a revision implant in 72 consecutive aseptic cases which were included in this retrospective study. The mean follow-up period was 8 years. Bone graft transplantation was performed in 32% of all cases. In 90%, the cup was fixed with additional screws. The follow-up radiographs were analysed with regards to cup migration, osteointegration and osteolysis in the DeLee zones using a computer aided program taking the teardrop figure as a main point of reference. For clinical evaluation the Harris-Hip-Score and the WOMAC-Score were utilized. RESULTS: At the follow up examination, the mean Harris-Hip-Score was 83.5 points and the mean WOMAC-Score 34.7 points. 93% of all patients were satisfied with the result of the operation. No aseptic cup loosening could be observed and only one cup had to be removed due to infection. No significant longitudinal or transversal cup migration could be observed. CONCLUSION: Aesculap's Plasmacup SC is suitable as a cementless cup revision implant. There is stable cup osteointegration, post press-fit implantation, even in the case of major acetabular bone defects.

Impact of a dry inoculum deposition on the efficacy of copper-based antimicrobial surfaces.

BACKGROUND: The introduction of antimicrobial surfaces into healthcare environments is believed to impact positively on the rate of healthcare-associated infections by significantly decreasing pathogen presence on surfaces. AIM: To report on a novel efficacy test that uses a dry bacterial inoculum to measure the microbicidal efficacy of antimicrobial surfaces. METHODS: An aerosolized dry inoculum of Staphylococcus aureus or Acinetobacter baumannii was deposited on copper alloy surfaces or a hospital-grade stainless-steel surface. Surviving bacteria were enumerated following incubation of the inoculated surfaces at an environmentally relevant temperature and relative humidity. Damage caused to bacteria by the aerosolization process and by the different surfaces was investigated. FINDINGS: Dry inoculum testing showed a <2-log10 reduction in S. aureus or A. baumannii on the copper alloy surfaces tested after 24 h at 20°C and 40% relative humidity. Potential mechanisms of action included membrane damage, DNA damage and arrested cellular respiration. The aerosolization process caused some damage to bacterial cells. Once this effect was taken into account, the antimicrobial activity of copper surfaces was evident. CONCLUSIONS: Our test provided a realistic deposition of a bacterial inoculum to a surface and, as such, a realistic protocol to assess the efficacy of dry antimicrobial environmental surfaces in vitro.

Bacterial attachment and removal properties of silicon- and nitrogen-doped diamond-like carbon coatings.

Si- and N-doped diamond-like carbon (DLC) coatings with various Si and N contents were deposited on glass slides using magnetron sputter ion-plating and plasma-enhanced chemical vapour deposition. Surface energy analysis of the DLC coatings revealed that with increasing Si content, the electron acceptor gamma(s)(+) value decreased while the electron donor gamma(s)(-) value increased. The antifouling property of DLC coatings was evaluated with the bacterium, Pseudomonas fluorescens, which is one of the most common microorganisms forming biofilms on the surface of heat exchangers in cooling water systems. P. fluorescens had a high value of the gamma(s)(-) component (69.78 mN m(-1)) and a low value of the gamma(s)(+) component (5.97 mN m(-1)), and would be negatively charged with the zeta potential of -16.1 mV. The experimental results showed that bacterial removal by a standardised washing procedure increased significantly with increasing electron donor gamma(s)(-) values and with decreasing electron acceptor gamma(s)(+) values of DLC coatings. The incorporation of 2%N into the Si-doped DLC coatings further significantly reduced bacterial attachment and significantly increased ease of removal. The best Si-N-doped DLC coatings reduced bacterial attachment by 58% and increased removal by 41%, compared with a silicone coating, Silastic T2. Bacterial adhesion strength on the DLC coatings is explained in terms of thermodynamic work of adhesion.

Study rationale and protocol: prospective randomized comparison of metal ion concentrations in the patient's plasma after implantation of coated and uncoated total knee prostheses.

BACKGROUND: Any metal placed in a biological environment undergoes corrosion. Thus, with their large metallic surfaces, TKA implants are particularly prone to corrosion with subsequent release of metal ions into the human body which may cause local and systemic toxic effects and hypersensitivity reactions, and increase cancer risk. To address this problem, a new 7-layer zirconium coating developed especially for cobalt-chrome orthopaedic implants was tested biomechanically and found to lower metal ion release. The purpose of the proposed clinical trial is to compare the metal ion concentration in patients' plasma before and after implantation of a coated or uncoated TKA implant. METHODS/DESIGN: In this randomised controlled trial, 120 patients undergoing primary TKA will be recruited at the Department of Orthopaedic Surgery of the University Hospital in Dresden, Germany, and randomised to either the coated or uncoated prosthesis. Outcome assessments will be conducted preoperatively and at 3 months, 12 months and 5 years postoperatively. The primary clinical endpoint will be the chromium ion concentration in the patient's plasma after 1 and 5 years. Secondary outcomes include cobalt, molybdenum and nickel ion concentrations after 1 and 5 years, allergy testing for hypersensitivity against one of these metals, the Knee Society Score to assess clinical and physical function of the knee joint, the self-assessment Oxford Score and the Short Form 36 quality of live questionnaire. DISCUSSION: The metal ion concentration in the patient's plasma has been shown to increase after TKA, its eventual adverse effects being widely debated. In the light of this discussion, ways to reduce metal ion release from orthopaedic implants should be studied in detail. The results of this investigation may lead to a new method to achieve this goal. TRIALS REGISTER: Clinicaltrials registry NCT00862511.

Magnesium 2000 postmarket evaluation: Guideline adherence and intraprocedural performance of a sirolimus-eluting resorbable magnesium scaffold.

BACKGROUND: The Magmaris bioresorbable magnesium scaffold was successfully tested in in-vitro and in clinical premarket studies. Subsequently the Magmaris postmarket program aimed to review intraprocedural data of at least 2000 patients to assess user preferences, guideline adherence and intraprocedural performance in clinical routine. METHODS: This international multicentre survey encompasses data from 356 hospitals across 45 countries. As part of the certification for Magmaris implantation, each hospital had to complete consecutive post-market evaluation forms of their first 10 commercial Magmaris patients. RESULTS: From June 2016 to May 2018, data on 2018 implantations were collected. Main reasons for selecting Magmaris was patients' life expectancy (67%, n = 1359) and low or not calcified lesions, (67%, n = 1357). Magmaris was successfully deployed in 99% of cases (n = 1995), predilatation was performed in 95% (n = 1922) and post-dilatation in 87% (n = 1756). Physicians rated the overall performance and the pushability as good or very good in 96% of cases (n = 1799). Guide wire friction, trackability, and conformability were rated as good or very good in 94% of cases, and crossability in 93%. The majority of patients were scheduled to receive dual antiplatelet therapy for up to 12 months. CONCLUSION: Generally, implantation guidelines were adhered to and theoretical advantages of the metal scaffold observed in in-vitro tests have translated into practice with good intraprocedural performance outcomes, confirming the controlled roll-out of this novel technology into clinical practice. SUMMARY FOR ANNOTATED TABLE OF CONTENT: The Magmaris 2000 program includes the first commercial cases at each hospital. Overall, data on 2018 implantations were collected. The high rate of pre- and post-dilatation as well as other parameters confirm that generally the implantation guidelines are adhered to and the good intraprocedural performance (rated as good or very good in 96%) confirm the theoretical advantages of a metallic scaffold in practice.

Comparison between paclitaxel-coated balloon and standard uncoated balloon in the treatment of femoropopliteal long lesions in diabetics.

Atherosclerotic diseases may include femoropopliteal artery stenosis or occlusion. Percutaneous transluminal angioplasty (PTA) is an effective and minimally invasive treatment strategy for atherosclerotic femoropopliteal artery stenosis/occlusion disease. Balloon angioplasty is a widely used technique in the management of occlusive disease in almost all arterial segments.We enrolled 111 diabetics with long femoropopliteal lesions, among which 54 received PTA with paclitaxel-coated balloon (the Paclitaxel group), and 57 with standard balloon catheters (the Control group).The primary outcome was set as angiographic late lumen loss (LLL) within 6 months; the secondary angiographic outcome was binary restenosis. Clinical outcomes included Rutherford clarification, ankle-brachial index (ABI) and rate of clinically driven target lesion revascularization (TLR). Two groups had similar basal clinical features, angiographic and procedural characteristics. Compared to controls, the Paclitaxel group had a significantly lower 6-month LLL rate, 12-month binary restenosis rate, 12-month TLR, lower Rutherford grades at 3 and 6 months, and higher ABI at 3 months. For all factors which might influence outcomes, fasting blood glucose was negatively correlated with ABI; the blood urea nitrogen (BUN) was positively related with the Rutherford clarification grades. In addition, the coronary heart disease (CHD) and smoking histories were positively correlated with residual stenosis after treatment.Collectively, the paclitaxel-coated balloon angioplasty can yield more favorable angiographic and clinical outcomes than standard uncoated balloon angioplasty, even in the more challenging lesions (the long and occlusive femoropopliteal lesions) in diabetics, when it had a similar safety profile to the traditional balloon. Blood glucose, BUN, CHD, and smoking imply poor curative effects.

Biocompatibility enhancement of graphene oxide-silver nanocomposite by functionalisation with polyvinylpyrrolidone.

Several materials such as silver are used to enhance graphene oxide (GO) sheets antimicrobial activity. However, these toxic materials decrease its biocompatibility and hinder its usage in many biological applications. Therefore, there is an urgent need to develop nanocomposites that can preserve both the antimicrobial activity and biocompatibility simultaneously. This work highlights the importance of functionalisation of GO sheets using Polyvinylpyrrolidone (PVP) and decorating them with silver nanoparticles (AgNPs) in order to enhance their antimicrobial activity and biocompatibility at the same time. The structural and morphological characterisations were performed by UV-Visible, Fourier transform infrared (FTIR), and Raman spectroscopic techniques, X-ray diffraction (XRD), and high-resolution transmission electron microscopy (HR-TEM). The antimicrobial activities of the prepared samples against Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans were studied. The cytotoxicity of prepared materials was tested against BJ1 normal skin fibroblasts. The results indicated that the decoration with AgNPs showed a significant increase in the antimicrobial activity of GO and FGO sheets, and functionalisation of GO sheets and GO-Ag nanocomposite with PVP improved the cell viability about 40 and 35%, respectively.

Opinion: Aortic Graft Infection-Any Guidelines or Just Surgeon's Experience Lines!

Aggressive strategies for thoracic aortic graft infection, including resection of all infected tissues, in situ replacement with a rifampicin-bonded graft, and omental flap installation, resulted in improved survival.

Comparative efficacy of two paclitaxel-coated balloons with different excipient coatings in patients with coronary in-stent restenosis: A pooled analysis of the Intracoronary Stenting and Angiographic Results: Optimizing Treatment of Drug Eluting Stent In-Stent Restenosis 3 and 4 (ISAR-DESIRE 3 and ISAR-DESIRE 4) trials.

BACKGROUND: Angioplasty with paclitaxel-coated balloons (PCB) is recommended for treatment of patients with coronary in-stent restenosis (ISR) according to European clinical practice guidelines. Most clinical trials have investigated iopromide-based PCB and there is a paucity of data comparing efficacy against butyryl-tri-hexyl citrate (BTHC)-based PCB. Our aim was to compare the performance of two widely-used PCB in the treatment of coronary ISR. METHODS: We analysed patients treated with BTHC- or iopromide-PCB for treatment of drug-eluting stent ISR in the setting of 2 consecutive trials with identical inclusion and exclusion criteria. The primary endpoint was diameter stenosis at 6-8month angiographic surveillance. The secondary endpoint of interest was the composite of death, myocardial infarction (MI) or target-lesion revascularisation (TLR) at 1year. Multivariate analysis was performed to adjust for differences in baseline characteristics between groups. RESULTS: In total, 264 patients were treated with BTHC-PCB (n=127) or iopromide-PCB (n=137). Baseline patient characteristics were similar for both groups. Post-procedure stenosis was slightly larger with BTHC-PCB (22.3 [SD 8.2]% vs. 18.4 [SD 9.9]%, P=0.001). At 6-8month angiography, diameter stenosis was 40.4 [SD 21.9]% vs. 37.4 [SD 21.4]% in the BTHC-PCB and iopromide-PCB groups, respectively (P=0.16, Padjusted=0.32). At 1year, death, MI or TLR occurred in 29 (23.2%) vs. 32 (23.4%) patients in the BTHC-PCB and iopromide-PCB groups, respectively (HR 1.03 [95% CI 0.62-1.70], P=0.91, Padjusted=0.96). CONCLUSIONS: In patients undergoing intervention for ISR, angioplasty with BTHC-PCB showed similar angiographic and clinical results at 1year compared with iopromide-PCB.

Report of an ESC-EAPCI Task Force on the evaluation and use of bioresorbable scaffolds for percutaneous coronary intervention: executive summary.

A previous Task Force of the European Society of Cardiology (ESC) and European Association of Percutaneous Cardiovascular Interventions (EAPCI) provided a report on recommendations for the non-clinical and clinical evaluation of coronary stents. Following dialogue with the European Commission, the Task Force was asked to prepare an additional report on the class of devices known as bioresorbable scaffolds (BRS). Five BRS have CE-mark approval for use in Europe. Only one device -the Absorb bioresorbable vascular scaffold- has published randomized clinical trial data and this data show inferior outcomes to conventional drug-eluting stents (DES) at 2-3 years. For this reason, at present BRS should not be preferred to conventional DES in clinical practice. The Task Force recommends that new BRS devices should undergo systematic non-clinical testing according to standardized criteria prior to evaluation in clinical studies. A clinical evaluation plan should include data from a medium sized, randomized trial against DES powered for a surrogate end point of clinical efficacy. Manufacturers of successful devices receive CE- mark approval for use and must have an approved plan for a large-scale randomized clinical trial with planned long-term follow-up.

Polyelectrolyte thromboresistant affinity coatings for modification of devices contacting blood.

The modification of hydrophobic polyethylene/polystyrene surfaces of medical devices with bilayer/multilayer coatings (BCs/MCs) based on polyelectrolyte complexes (PEC) of modified poly(N-vinylpyrrolidone-co-maleic acid) copolymer (VPMA) with chitosan, amphiphilic chitosan, or albumin was studied. The VPMA contained l-Lysine as affinity ligand for plasminogen attached through alpha-amino group. The surface properties and chemical composition of the surfaces investigated were analyzed, using sessile-drop water contact angle measurements, attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). The specific adsorption of plasminogen (precursor of fibrinolytic enzyme plasmin) from its solutions and from human blood plasma on the modified surfaces was investigated. It was established that polyelectrolyte MCs are more efficient than single-layer BCs and the affine polymer coatings without interlayer. A thrombogenicity decrease for the materials modified with BCs and MCs was shown in in vitro and ex vivo trials.

Systematic Study of Functionalizable, Non-Biofouling Agarose Films with Protein and Cellular Patterns on Glass Slides.

Herein we demonstrate a systematic investigation of chemically functionalizable, non-biofouling agarose films over large-area glass surfaces. Agarose films, prepared with various concentrations of aqueous agarose, were activated by using periodate oxidation to generate aldehyde groups at the termini of the agarose chains. The non-biofouling efficacy and binding capabilities of the activated films were evaluated by using protein and cellular patterning, performed by using a microarrayer, microcontact printing, and micromolding in capillaries. Characterization by using a fluorescence slide scanner and a scanning-probe microscope revealed that the pore sizes of the agarose films played an important role in achieving desirable film performance; the 0.2 wt % agarose film exhibited the optimum efficacy in this work.

Analysis of Al2O3-parylene C bilayer coatings and impact of microelectrode topography on long term stability of implantable neural arrays.

OBJECTIVE: Performance of many dielectric coatings for neural electrodes degrades over time, contributing to loss of neural signals and evoked percepts. Studies using planar test substrates have found that a novel bilayer coating of atomic-layer deposited (ALD) Al2O3 and parylene C is a promising candidate for neural electrode applications, exhibiting superior stability to parylene C alone. However, initial results from bilayer encapsulation testing on non-planar devices have been less positive. Our aim was to evaluate ALD Al2O3-parylene C coatings using novel test paradigms, to rigorously evaluate dielectric coatings for neural electrode applications by incorporating neural electrode topography into test structure design. APPROACH: Five test devices incorporated three distinct topographical features common to neural electrodes, derived from the utah electrode array (UEA). Devices with bilayer (52 nm Al2O3 + 6 µm parylene C) were evaluated against parylene C controls (N ⩾ 6 per device type). Devices were aged in phosphate buffered saline at 67 °C for up to 311 d, and monitored through: (1) leakage current to evaluate encapsulation lifetimes (>1 nA during 5VDC bias indicated failure), and (2) wideband (1-105 Hz) impedance. MAIN RESULTS: Mean-times-to-failure (MTTFs) ranged from 12 to 506 d for bilayer-coated devices, versus 10 to >2310 d for controls. Statistical testing (log-rank test, α = 0.05) of failure rates gave mixed results but favored the control condition. After failure, impedance loss for bilayer devices continued for months and manifested across the entire spectrum, whereas the effect was self-limiting after several days, and restricted to frequencies <100 Hz for controls. These results correlated well with observations of UEAs encapsulated with bilayer and control films. SIGNIFICANCE: We observed encapsulation failure modes and behaviors comparable to neural electrode performance which were undetected in studies with planar test devices. We found the impact of parylene C defects to be exacerbated by ALD Al2O3, and conclude that inferior bilayer performance arises from degradation of ALD Al2O3 when directly exposed to saline. This is an important consideration, given that neural electrodes with bilayer coatings are expected to have ALD Al2O3 exposed at dielectric boundaries that delineate electrode sites. Process improvements and use of different inorganic coatings to decrease dissolution in physiological fluids may improve performance. Testing frameworks which take neural electrode complexities into account will be well suited to reliably evaluate such encapsulation schemes.

Verapamil eluting stents as a possible treatment for vasospasm after subarachnoid hemorrhage.

OBJECTIVE: The only pharmacologic prophylaxis for cerebral vasospasm after subarachnoid hemorrhage is oral nimodipine. A novel way to mitigate this risk may be to design a drug eluting stent that elutes verapamil over the time period typically associated with vasospasm. In this study, we explore different methods of coating nitinol stents with a bioabsorbable polymer and determine the release profile of various verapamil coated stents for the potential treatment of vasospasm. METHODS: Nitinol stents were coated with different concentrations of poly(lactic acid-co-glycolic acid) (PLGA) in chloroform solution and using three coating techniques: dip coating, spin coating, and electrospinning. Morphology of the coatings were studied with scanning electron microscopy. 12 verapamil eluting stents were then prepared using different verapamil concentrations and coatings with different numbers of layers. Drug release behaviors were studied using UV spectroscopy for 21 days. RESULTS: Electrospinning at 20% w/v resulted in a smooth uniform coating without significant surface irregularities, and may be the most effective technique to coat stents. Stents with a single layer of PLGA/verapamil coating showed a two phase release profile (initial burst release followed by a slow rate of release) whereas stents with a bilayer coating showed a lower level of initial release followed by a slower sustained release phase. CONCLUSIONS: Development of verapamil eluting stents that elute drug over the time course typical of cerebral vasospasm, and for either immediate or prophylactic treatment, is technically feasible. Further in vitro and in vivo studies are required to determine whether this can improve the outcome of patients after subarachnoid hemorrhage.