Effect of oral exposure on chemical, physical, mechanical, and morphologic properties of clear orthodontic aligners.

INTRODUCTION: The dental industry is heavily committed to developing more esthetic solutions for orthodontic treatments. Invisalign is a system of transparent orthodontic aligners introduced as an alternative to conventional orthodontic fittings with brackets and metal wires. This study aimed to assess the chemical, physical, mechanical and morphologic changes in these polymeric aligners after exposure to the oral environment. METHODS: Twenty-four Invisalign orthodontic aligners were equally divided into 2 groups: an in vivo aged group in which patients used aligners for 14 days and the reference group, unexposed to the oral environment. Different experimental techniques were used to study the chemical structure, the color changes and translucency, the density and subsequent volume of the aligners, mechanical properties, surface roughness, morphology and elemental composition. The data were subjected to several statistical analyses. RESULTS: Clear orthodontic aligners exhibit chemical stability but undergo a statistically significant optical change in color and translucency. There was a gradual increase in the water absorption rate and the dimensional variation of the polymer, indicating a strong correlation among these factors. The mechanical properties of the polymer showed a statistically significant decrease in its elastic modulus and hardness. There was a slight tendency toward increased surface roughness of the material, but no statistical differences were found between reference and aged groups. The surface morphology of the used aligners demonstrates microcracks, distortions and biofilm formation. CONCLUSION: Intraoral aging adversely affected the physical, mechanical, and morphologic properties of the Invisalign appliance.

Evaluation of Packaging Materials in Freeze-Drying: Use of Polymer Caps and Nested Vials and Their Impact on Process and Product Attributes.

Current trends in the pharmaceutical industry led to a demand for more flexible manufacturing processes with smaller batch sizes. Prepackaged nested vials that can be processed as a unit were introduced into the market to fulfill this need. However, vial nests provide a different thermal environment for the vials compared to a hexagonal packaging array and could therefore influence product temperature profiles, primary drying times, and product quality attributes. Polymer caps with the possibility of vial closure inside the freeze-drying chamber were developed to remove the risks and need of a crimping process. A general concern with the use of such caps is the possibility of an increase in resistance to water vapor flow out of the vial. This case study investigated the effect of the LyoSeal® and PLASCAP® polymer caps and EZ-fill® nests on the freeze-drying process. Amorphous and partially crystalline model formulations were freeze-dried. Process data and product quality attributes were compared for regularly stoppered vials and vials with polymer caps as well as vials in a hexagonal packaging array and nested vials. The results indicated no increased resistance or impeded water vapor flow by the polymer caps. Differences in the macro- and microscopic appearances of products and a trend towards lower product temperatures were observed for the investigated nest type compared to a regular hexagonal packaging array. Consequently, the polymer caps could be used as an alternative to regular stoppers without affecting freeze-drying process data or product quality attributes, while the different thermal environment of nested vials should be considered.

PEEK versus titanium cages in lateral lumbar interbody fusion: a comparative analysis of subsidence.

OBJECTIVE: The authors have provided a review of radiographic subsidence after lateral lumbar interbody fusion (LLIF) as a comparative analysis between titanium and polyetheretherketone (PEEK) cages. Many authors describe a reluctance to use titanium cages in spinal fusion secondary to subsidence concerns due to the increased modulus of elasticity of metal cages. The authors intend for this report to provide observational data regarding the juxtaposition of these two materials in the LLIF domain. METHODS: A retrospective review of a prospectively maintained database identified 113 consecutive patients undergoing lateral fusion for degenerative indications from January to December 2017. The surgeons performing the cage implantations were two orthopedic spine surgeons and two neurosurgeons. Plain standing radiographs were obtained at 1-2 weeks, 8-12 weeks, and 12 months postoperatively. Using a validated grading system, interbody subsidence into the endplates was graded at these time points on a scale of 0 to III. The primary outcome measure was subsidence between the two groups. Secondary outcomes were analyzed as well. RESULTS: Of the 113 patients in the sample, groups receiving PEEK and titanium implants were closely matched at 57 and 56 patients, respectively. Cumulatively, 156 cages were inserted and recombinant human bone morphogenetic protein-2 (rhBMP-2) was used in 38.1%. The average patient age was 60.4 years and average follow-up was 75.1 weeks. Subsidence in the titanium group in this study was less common than in the PEEK cage group. At early follow-up, groups had similar subsidence outcomes. Statistical significance was reached at the 8- to 12-week and 52-week follow-ups, demonstrating more subsidence in the PEEK cage group than the titanium cage group. rhBMP-2 usage was also highly correlated with higher subsidence rates at all 3 follow-up time points. Age was correlated with higher subsidence rates in univariate and multivariate analysis. CONCLUSIONS: Titanium cages were associated with lower subsidence rates than PEEK cages in this investigation. Usage of rhBMP-2 was also robustly associated with higher endplate subsidence. Each additional year of age correlated with an increased subsidence risk. Subsidence in LLIF is likely a response to a myriad of factors that include but are certainly not limited to cage material. Hence, the avoidance of titanium interbody implants secondary solely to concerns over a modulus of elasticity likely overlooks other variables of equal or greater importance.

Baxter elastomeric pumps: Weighing as an alternative to visual inspection.

Purpose Elastomeric pumps are used to administer 46-hour infusions of 5-fluorouracil (5FU). Baxter suggests patients visually monitor their pumps to ensure that infusions are proceeding correctly. This can be confusing and lead to concerns about under- or over-dosing. Baxter has not considered weighing pumps as a validated method for monitoring. This study aims to validate weighing as a more accurate method for patients and healthcare professionals, and describe real life Baxter Infusor™ variability. Methods Patients who had been started on a 46-hour 5FU infusion returned to the clinic approximately 24 h after starting treatment. The pump was weighed on a StarFrit kitchen scale, and date, time, and weights recorded. Patients were asked if they had a preference for weighing or visually inspecting their pump. Results Pumps ( n = 103) were weighed between 17.25 and 27.5 h after connection. The average weight of a pump was 189 g. Of 103 pumps weighed, 99 weighed less than expected, corresponding to average flow rates of 5.69 mL/h over the elapsed time. The expected flow rate is 5 mL/h with 10% variability. Average flow rates within the 17.25- to 27.5-hour window were 4.561 mL/h, which is 8.78% slower than expected, but within the 10% known variability. Forty-seven percent of patients didn't have a preference for either method, but for those who did have a preference, more than twice as many preferred weighing. Conclusion With proper education, weighing Baxter Infusors at home with kitchen scales can be an accepted and objective alternative to the current recommendation of visual inspection.

Removal of free light chains in hemodialysis patients without multiple myeloma: a crossover comparison of three different dialyzers.

BACKGROUND: Immunoglobulin light chains are classified as middle molecule uremic toxins able to interact with B lymphocyte membranes leading to the activation of transmembrane signaling. The ensuing impairment of neutrophil function can contribute to the chronic inflammation state of uremic patients, and the increased risk of bacterial infections or vascular calcifications. The aim of this crossover observational study was to assess the difference in free light chain removal by three different hemodialysis filters in patients not affected by multiple myeloma. METHODS: Free light chain removal was compared in the polymethylmethacrylate (PMMA) membrane Filtryzer BK-F, the polyphenylene HFR17 filter and the conventional polysulfone filter F7HPS. Twenty chronic hemodialysis patients were enrolled: mean age was 67.7 ± 17.0 years, M/F = 14/6, dialysis vintage (months) 25.5 ± 32.0. The patients were randomized into two groups of treatment lasting 6 weeks each. The dialysis sessions checked were the midweek sessions and the blood was drawn at times 0, 120' and 240'. Kappa (k) and lambda (λ) light chain levels, ß2microglobulin (ß2M), C reactive protein (CRP) and albumin were checked. RESULTS: K light chain levels were 345.0 ± 100.0 mg/L, λ light chains were 121.4 ± 27.0 mg/L. The values of k light chains at times 120' and 240' were significantly lower with PMMA and HFR17 than those obtained with F7. The reduction ratio per session (RRs) for k light chains was 44.1 ± 4.3% with HFR17, 55.3 ± 3.4% with PMMA, 25.7 ± 8.3% with F7 (p = 0.018). The RRs for λ light chains was 30.3 ± 2.9% with HFR17, 37.8 ± 17.3% with PMMA, 14.0 ± 3.9% with F7 (p = 0.032). As to ß2M, RRs was 42.4 ± 3.2% with HFR17 vs. 33.9 ± 2.8% with PMMA vs. 6.3 ± 1.9% with F7 (p = 0.022). The three filters tested showed no differences in CRP or albumin levels. CONCLUSION: In terms of light chain and ß2M removal, the PMMA and on-line HFR filters are similar and both are significantly more effective than the F7 filter in chronic dialysis patients. TRIAL REGISTRATION: The present trial was registered retrospectively ( NCT02950389 , 31/10/2016).

High-throughput quantification of stabilizers in polymeric materials by flow injection tandem mass spectrometry.

RATIONALE: High-throughput methods for identification and quantification of stabilizers in plastic materials are of significant importance in order to evaluate the suitability of materials of unknown origin for specific application areas, to clarify reasons for failure of materials, or for comparison of materials from different sources. METHODS: In the present study, a highly sensitive and rapid flow injection method coupled to selected reaction monitoring mass spectrometry (MS) for comprehensive analysis of 21 polymer stabilizers in polyolefins is demonstrated. A critical factor for this approach is the choice of ionization mode, as no separation was performed prior to MS detection. Differences between several ionization techniques regarding matrix effects are reported. RESULTS: Atmospheric pressure chemical ionization was found to be the most suitable ionization technique, with no significant matrix effects observed. The developed method has a linear dynamic range over two to three orders of magnitude with correlation coefficients better than 0.99 for all studied analytes. Following a multistep sample preparation protocol, the method allowed quantification down to minimum values of between 0.0001 and 0.04 wt% depending on the type of stabilizer. Results were compared to an established chromatographic approach and showed very good correlation (bias below 7.5%). CONCLUSIONS: The applicability of the optimized method could be demonstrated for both the qualitative and quantitative determination of polymer stabilizers in polyolefins. Furthermore, the described approach yields a complete analysis in a much shorter time than can be achieved with commonly applied chromatographic methods.

A review on strengthening steel beams using FRP under fatigue.

In recent decades, the application of fibre-reinforced polymer (FRP) composites for strengthening structural elements has become an efficient option to meet the increased cyclic loads or repair due to corrosion or fatigue cracking. Hence, the objective of this study is to explore the existing FRP reinforcing techniques to care for fatigue damaged structural steel elements. This study covers the surface treatment techniques, adhesive curing, and support conditions under cyclic loading including fatigue performance, crack propagation, and failure modes with finite element (FE) simulation of the steel bridge girders and structural elements. FRP strengthening composites delay initial cracking, reduce the crack growth rate, extend the fatigue life, and decrease the stiffness decay with residual deflection. Prestressed carbon fibre-reinforced polymer (CFRP) is the best strengthening option. End anchorage prevents debonding of the CRRP strips at the beam ends by reducing the local interfacial shear and peel stresses. Hybrid-joint, nanoadhesive, and carbon-flex can also be attractive for strengthening systems.

Research on the mechanical properties of a glass fiber reinforced polymer-steel combined truss structure.

An assembled plane truss structure used for vehicle loading is designed and manufactured. In the truss, the glass fiber reinforced polymer (GFRP) tube and the steel joint are connected by a new technology featuring a pretightened tooth connection. The detailed description for the rod and node design is introduced in this paper, and a typical truss panel is fabricated. Under natural conditions, the short-term load test and long-term mechanical performance test for one year are performed to analyze its performance and conduct a comparative analysis for a reasonable FEM model. The study shows that the design and fabrication for the node of an assembled truss panel are convenient, safe, and reliable; because of the creep control design of the rods, not only does the short-term structural stiffness meet the design requirement but also the long-term creep deformation tends towards stability. In addition, no significant change is found in the elastic modules, so this structure can be applied in actual engineering. Although the safety factor for the strength of the composite rods is very large, it has a lightweight advantage over the steel truss for the low density of GFRP. In the FEM model, simplifying the node as a hinge connection relatively conforms to the actual status.

Current practices for describing the performance of molecularly imprinted polymers can be misleading and may be hampering the development of the field.

A contributing factor to the labored advance of molecularly imprinting as a viable commercial solution to molecular recognition needs is the absence of a standard and robust method for assessing and reporting on molecular imprinted polymer (MIP) performance. The diversity and at times inappropriateness of MIP performance indicators means that the usefulness of the literature back-catalogue, for predicting, elucidating or understanding patterns in MIP efficacy, remains largely inaccessible. We hereby put forward the case that the simple binding isotherm is the most versatile and useful method of assessing and reporting MIP function, allowing direct comparison between polymers prepared and evaluated in different studies. In this study we describe how to correctly plot and interpret a bound / free isotherm and show how such plots can be readily used to predict outcomes, retro-analyze data and optimize experimental design. We propose that by adopting the use of correctly constructed isotherms as the primary form of data representation researchers will enable inter-laboratory comparisons, promote good experimental design and encourage a greater collective understanding of molecular imprinting.

From lactic acid to poly(lactic acid) (PLA): characterization and analysis of PLA and its precursors.

The quality of the monomers lactic acid and lactide as well as the chemical changes induced during polymerization and processing are crucial parameters for controlling the properties of the resulting poly(lactic acid) (PLA) products. This review presents the most important analysis and characterization methods for quality assessment of PLA and its precursors. The impurities typically present in lactic acid or lactide monomers and their possible origins and effects on resulting PLA products are discussed. The significance of the analyses for the different polymer production stages is considered, and special applications of the methods for studying features specific for PLA-based materials are highlighted.

Evaluation of different adsorbents for large-volume pre-concentration for analyzing atmospheric persistent organic pollutants at trace levels.

This paper investigates the performance of some adsorbents, Carbopack B, Tenax-GC, and XAD-2, in a SPE and GC analytical method for sampling and determining some persistent organic pollutants such as benzene, toluene, o-, m-, and p-xylenes, naphthalene, anthracene, fluorene, fluoranthene, benzo(i,k)fluorene, pyrene and benzo(a)pyrene, aldrin, dieldrin, endrin, endosulfan, and PCB congeners (nos. 1, 15, 44, 77, and 209). Adsorbents evaluated in this study are Carbopack B, Tenax-GC, and XAD-2. Before applying the analytical method to air samples, it was widely investigated in laboratory: the sampler is constituted by a glass pyrex vial home-filled with 300 mg (sampling section) and 50 mg of adsorbent material (backup section). The re-extraction is performed by CS(2) (1-2 mL) and analysis is performed by GC-FID and GC-ECD. The evaluation of breakthrough volumes and desorption efficiencies shows the XAD-2 performance in the enrichment of different organic species present in atmosphere at trace levels (ppt) to be more advantageous than the other two materials in terms of analytical and technical parameters. One of the advantages is the high volume of sampled air with high concentration factor and limited loss of analytes (breakthrough volumes are higher than 5,000 L g(-1) for high-boiling compounds and higher than 400 L g(-1) for low-boiling solutes). Another advantage is the possibility of easy and speed re-extraction of analytes using small volumes of solvent (a few milliliters). The recoveries are about 100% with a RSD ≤ 2.3 for low-boiling compounds, and between 77% and 109% with a RSD ≤ 5.7% for high-boiling species. The XAD-2 adsorbent was applied to real air samples collected in different polluted areas (urban, industrial, rural, and remote locations) demonstrating the wide application of such methodology in various environmental situation.

Development of controlled-release matrix tablet of risperidone: influence of Methocel®- and Ethocel®-based novel polymeric blend on in vitro drug release and bioavailability.

Controlled-release (CR) matrix tablet of 4 mg risperidone was developed using flow bound dry granulation-slugging method to improve its safety profile and compliance. Model formulations F1, F2, and F3, consisting of distinct blends of Methocel® K100 LV-CR and Ethocel® standard 7FP premium, were slugged. Each batch of granules (250-1,000 µm), obtained by crushing the slugs, was divided into three portions after lubrication and then compressed to 9-, 12-, and 15-kg hard tablets. In vitro drug release studies were carried out in 0.1 N HCl (pH 1.2) and phosphate buffer (pH 6.8) using a paddle dissolution apparatus run at 50 rpm. The CR test tablet, containing 30% Methocel® and 60% Ethocel® (F3) with 12-kg hardness, exhibited pH-independent zero-order release kinetics for 24 h. The drug release rate was inversely proportional to the content of Ethocel®, while the gel layer formed of Methocel® helped in maintaining the integrity of the matrix. Changes in the hardness of tablet did not affect the release kinetics. The tablets were reproducible and stable for 6 months at 40 ± 2°C/75 ± 5% relative humidity. Risperidone and its active metabolite, 9-hydroxyrisperidone, present in the pooled rabbit's serum, were analyzed with HPLC-UV at λ(max) 280 nm. The CR test tablet exhibited bioequivalence to reference conventional tablet in addition to the significantly (p < 0.05) optimized peak concentration, C(max), and extended peak time, T (max), of the active moiety. There was a good association between drug absorption in vivo and drug release in vitro (R(2) = 0.7293). The successfully developed CR test tablet may be used for better therapeutic outcomes of risperidone.

A kinetic study of the polymorphic transformation of nimodipine and indomethacin during high shear granulation.

The objective of the present study was to investigate the mechanism, kinetics, and factors affecting the polymorphic transformation of nimodipine (NMD) and indomethacin (IMC) during high shear granulation. Granules containing active pharmaceutical ingredient, microcrystalline cellulose, and low-substituted hydroxypropylcellulose were prepared with ethanolic hydroxypropylcellulose solution, and the effects of independent process variables including impeller speed and granulating temperature were taken into consideration. Two polymorphs of the model drugs and granules were characterized by X-ray powder diffraction analysis and quantitatively determined by differential scanning calorimetry. A theoretical kinetic method of ten kinetic models was applied to analyze the polymorphic transformation of model drugs. The results obtained revealed that both the transformation of modification I to modification II of NMD and the transformation of the α form to the γ form of IMC followed a two-dimensional nuclei growth mechanism. The activation energy of transformation was calculated to be 7.933 and 56.09 kJ·mol(-1) from Arrhenius plot, respectively. Both the granulating temperature and the impeller speed affected the transformation rate of the drugs and, in particular, the high shear stress significantly accelerated the transformation process. By analyzing the growth mechanisms of granules in high-shear mixer, it was concluded that the polymorphic transformation of NMD and IMC took place in accordance with granule growth in a high-shear mixer.

Electrospinning/electrospraying coatings for metal microneedles: A design of experiments (DOE) and quality by design (QbD) approach.

The research presented here shows QbD implementation for the optimisation of the key process parameters in electrohydrodynamic atomisation (EHDA). Here, the electrosprayed nanoparticles and electrospun fibers consisting of a polymeric matrix and dye. Eight formulations were assessed consisting of 5% w/v of polycaprolactone (PCL) in dichloromethane (DCM) and 5% w/v polyvinylpyrrolidone (PVP) in ethanol. A full factorial DOE was used to assess the various parameters (applied voltage, deposition distance, flow rate). Further particle and fiber analysis using Scanning Electron Microscopy (SEM), Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), Fourier Transform Infrared Spectroscopy (FTIR), particle/fiber size distribution. In addition to this in vitro release studied were carried out using fluorescein and Rhodamine B as model dyes and in vitro permeation studies were applied. The results show a significant difference in the morphology of resultant structures as well as a more rapid release profile for the PVP particles and fibers in comparison to the sustained release profiles found with PCL. In vitro drug release studies showed 100% drug release after 7 days for PCL particles and showed 100% drug release within 120 min for PVP particles. The release kinetics and the permeation study showed that the MN successfully pierced the membrane and the electrospun MN coating released a large amount of the loaded drug within 6 h. This study has demonstrated the capability of these robust MNs to encapsulate a diverse range drugs within a polymeric matrix giving rise to the potential of developed personalised medical devices.

Load sharing and stabilization effects of anterior cervical devices.

STUDY DESIGN: Biomechanical human cadaveric cervical flexibility testing with direct load-sharing measurement. OBJECTIVE: To determine if the flexibility and load-sharing characteristics of a functional spinal unit were affected by anterior treatments for cervical pathologies. SUMMARY OF BACKGROUND DATA: With advancements in polymers, anterior cervical plates have used thermoplastics including recent designs from biodegradable polylactide acids. However, the difference in material properties between metal and polymer can be significant. METHODS: Thirteen cervical spine specimens were subjected to 5 treatments at C4-C5. Each treatment for each specimen was subjected to multidirectional flexibility testing. The third cycle was used for treatment comparisons. RESULTS: With the integrated load cell spacer, the mean range of motion for the functional spinal unit measured on average 104% + or - 40% normalized to the intact control. The mean biodegradable and titanium plate were 55% + or - 31% and 40% + or - 36%, respectively. Both plates exhibited statistically lower mean range of motions (P = 0.001 and P < 0.001) compared with spacers. The load transmitted through the interbody space was 54% + or - 20%, 43% + or - 20%, and 33% + or - 15% on average for the spacer, biodegradable, and titanium plate constructs, respectively. No statistically significant difference was detected between the biodegradable plate and spacer (P = 0.214). CONCLUSIONS: From this research, a biodegradable plate offers immediate postoperative stability significantly different than spacer alone treatments but with graft load sharing that is statistically no different. Thus, the intrinsic lower native material modulus of elasticity of biodegradable polymers has biomechanical implications. However, clinical evidence, particularly for long-term outcomes, will be required in understanding the efficacy of biodegradable polymers.

Biodegradability evaluation of polymers by ISO 14855-2.

Biodegradabilities of polymers and their composites in a controlled compost were described. Polycaprolactone (PCL) and poly(lactic acid) (PLA) were employed as biodegradable polymers. Biodegradabilities of PCL and PLA samples in a controlled compost were measured using a Microbial Oxidative Degradation Analyzer (MODA) according to ISO 14855-2. Sample preparation method for biodegradation test according to ISO/DIS 10210 was also described. Effects of sizes and shapes of samples on biodegradability were studied. Reproducibility of biodegradation test of ISO 14855-2 by MODA was confirmed. Validity of sample preparation method for polymer pellets, polymer film, and polymer products of ISO/DIS 10210 for ISO 14855-2 was confirmed.

Chronic Implantation of Multiple Flexible Polymer Electrode Arrays.

Simultaneous recordings from large populations of individual neurons across distributed brain regions over months to years will enable new avenues of scientific and clinical development. The use of flexible polymer electrode arrays can support long-lasting recording, but the same mechanical properties that allow for longevity of recording make multiple insertions and integration into a chronic implant a challenge. Here is a methodology by which multiple polymer electrode arrays can be targeted to a relatively spatially unconstrained set of brain areas. The method utilizes thin-film polymer devices, selected for their biocompatibility and capability to achieve long-term and stable electrophysiologic recording interfaces. The resultant implant allows accurate and flexible targeting of anatomically distant regions, physical stability for months, and robustness to electrical noise. The methodology supports up to sixteen serially inserted devices across eight different anatomic targets. As previously demonstrated, the methodology is capable of recording from 1024 channels. Of these, the 512 channels in this demonstration used for single neuron recording yielded 375 single units distributed across six recording sites. Importantly, this method also can record single units for at least 160 days. This implantation strategy, including temporarily bracing each device with a retractable silicon insertion shuttle, involves tethering of devices at their target depths to a skull-adhered plastic base piece that is custom-designed for each set of recording targets, and stabilization/protection of the devices within a silicone-filled, custom-designed plastic case. Also covered is the preparation of devices for implantation, and design principles that should guide adaptation to different combinations of brain areas or array designs.

High-Density, Long-Lasting, and Multi-region Electrophysiological Recordings Using Polymer Electrode Arrays.

The brain is a massive neuronal network, organized into anatomically distributed sub-circuits, with functionally relevant activity occurring at timescales ranging from milliseconds to years. Current methods to monitor neural activity, however, lack the necessary conjunction of anatomical spatial coverage, temporal resolution, and long-term stability to measure this distributed activity. Here we introduce a large-scale, multi-site, extracellular recording platform that integrates polymer electrodes with a modular stacking headstage design supporting up to 1,024 recording channels in freely behaving rats. This system can support months-long recordings from hundreds of well-isolated units across multiple brain regions. Moreover, these recordings are stable enough to track large numbers of single units for over a week. This platform enables large-scale electrophysiological interrogation of the fast dynamics and long-timescale evolution of anatomically distributed circuits, and thereby provides a new tool for understanding brain activity.

A three-dimensional printed photopolymer resin implant for orbital rehabilitation for evisceration.

PURPOSE: To evaluate the biocompatibility of three-dimensional (3D) printed orbital spheres for evisceration. MATERIALS: A total of 10 consecutive patients (eight females and two males; mean age, 46.8 ± 14.2 years) underwent evisceration of blind painful eyes. 3D spherical implants produced by a rapid prototype machine were used to restore orbital volume. The implants were produced from a commercially available photocurable resin (Fullcure®). Systemic toxicity was evaluated by comparing serum biochemical measurements (creatine phosphokinase, aspartate aminotransferase, alanine aminotransferase, albumin, creatinine, urea, alkaline phosphatase, and C-reactive protein) before and at 12 months after surgery. Local toxicity was assessed by the evaluation of signs of socket inflammation at the first postoperative month. Changes in implant size were determined by computed tomography scans at 2 and 12 months after surgery. RESULTS: The postoperative evaluations were uneventful. The biochemical evaluation showed no significant changes after surgery. None of the patients presented signs of orbital implant inflammation, infection, exposure, or extrusion. Computed tomography scan evaluations revealed no changes in implant size. CONCLUSION: To the best of our knowledge, this is the first phase-1 clinical study to certify the biocompatibility of the Fullcure resin for orbital implants in humans. The 3D printing technology permits fast and accurate production of implants for this purpose.

Reliability of parylene-based multi-electrode arrays chronically implanted in adult rat brains, and evidence of electrical stimulation on contact impedance.

OBJECTIVE: The goal of this study was to evaluate the long-term behavior of the surface electrode through electrochemical characterization and follow-up of implanted parylene/platinum microelectrodes. APPROACH: To this aim, we designed and manufactured specific planar electrodes for cortical implantation for a rat model. This work was included in the INTENSE® project, one of the goals of which was to prove the feasibility of selective neural recording or stimulation with cuff electrodes around the vagus nerve. MAIN RESULTS: After a 12-week implantation in a rat model, we can report that these microelectrodes have withstood in vivo use. Regarding the biocompatibility of the electrodes (materials and manufacturing process), no adverse effect was reported. Indeed, after the three-month implantation, we characterized limited tissue reaction beneath the electrodes and showed an increase and a stabilization of their impedance. Interestingly, the follow-up of the electrochemical impedance combined with electrical stimulation highlighted a drop in the impedance up to 60% at 1 kHz after ten minutes of electrical stimulation at 110 Hz. SIGNIFICANCE: This study gives evidence of the biocompatibility of the parylene platinum contact array designed for the project and confirms the effect of stimulation on the contact impedance.