Recovery of motor function after traumatic spinal cord injury by using plasma-synthesized polypyrrole/iodine application in combination with a mixed rehabilitation scheme.

Traumatic spinal cord injury (TSCI) can cause paralysis and permanent disability. Rehabilitation (RB) is currently the only accepted treatment, although its beneficial effect is limited. The development of biomaterials has provided therapeutic possibilities for TSCI, where our research group previously showed that the plasma-synthesized polypyrrole/iodine (PPy/I), a biopolymer with different physicochemical characteristics than those of the PPy synthesized by conventional methods, promotes recovery of motor function after TSCI. The present study evaluated if the plasma-synthesized PPy/I applied in combination with RB could increase its beneficial effects and the mechanisms involved. Adult rats with TSCI were divided into no treatment (control); biopolymer (PPy/I); mixed RB by swimming and enriched environment (SW/EE); and combined treatment (PPy/I + SW/EE) groups. Eight weeks after TSCI, the general health of the animals that received any of the treatments was better than the control animals. Functional recovery evaluated by two scales was better and was achieved in less time with the PPy/I + SW/EE combination. All treatments significantly increased ßIII-tubulin (nerve plasticity) expression, but only PPy/I increased GAP-43 (nerve regeneration) and MBP (myelination) expression when were analyzed by immunohistochemistry. The expression of GFAP (glial scar) decreased in treated groups when determined by histochemistry, while morphometric analysis showed that tissue was better preserved when PPy/I and PPy/I + SW/EE were administered. The application of PPy/I + SW/EE, promotes the preservation of nervous tissue, and the expression of molecules related to plasticity as ßIII-tubulin, reduces the glial scar, improves general health and allows the recovery of motor function after TSCI. The implant of the biomaterial polypyrrole/iodine (PPy/I) synthesized by plasma (an unconventional synthesis method), in combination with a mixed rehabilitation scheme with swimming and enriched environment applied after a traumatic spinal cord injury, promotes expression of GAP-43 and ßIII-tubulin (molecules related to plasticity and nerve regeneration) and reduces the expression of GFAP (molecule related to the formation of the glial scar). Both effects together allow the formation of nerve fibers, the reconnection of the spinal cord in the area of injury and the recovery of lost motor function. The figure shows the colocalization (yellow) of ßIII-tubilin (red) and GAP-43 (green) in fibers crossing the epicenter of the injury (arrowheads) that reconnect the rostral and caudal ends of the injured spinal cord and allowed recovery of motor function.

Examining the influence of ultraviolet C irradiation on recombinant human γD-crystallin.

PURPOSE: Human γD crystallin is a principal protein component of the human eye lens and associated with the development of juvenile and mature-onset cataracts. Exposure to ultraviolet (UV) light is thought to perturb protein structure and eventually lead to aggregation. This work is aimed at exploring the effects of UV-C irradiation on recombinant human γD-crystallin (HGDC). METHODS: Recombinant HGDC proteins were expressed in E. coli strain BL21(DE3) harboring plasmid pEHisHGDC and purified using chromatographic methods. The proteins were then exposed to UV-C light (λ(max)=254 nm, 15 W) at the intensity of 420, 800, or 1850 µW/cm(2). The UV-C-unexposed, supernatant fraction of UV-C-exposed, and re-dissolved precipitated fraction of UV-C exposed preparations were characterized by SDS-PAGE, turbidity measurement, CD spectroscopy, tryptophan fluorescence spectroscopy, acrylamide fluorescence quenching analysis, and sulfhydryl group measurements. RESULTS: The turbidity of the HGDC sample solution was found to be positively correlated with HGDC concentration, UV-C irradiation intensity, and UV-C irradiation duration. When exposed to UV-C, HGDC sample solutions became visibly turbid and a noticeable amount of larger protein particle, perceptible to the naked eye, was observed upon prolonged irradiation. The precipitated fraction of irradiated HGDC sample was found to be re-dissolved by guanidine hydrochloride. Electrophoresis, acrylamide fluorescence quenching, and spectroscopic analyses revealed differences in structures among the non-irradiated HGDC, the supernatant fraction of irradiated HGDC, and the re-dissolved precipitated fraction of irradiated HGDC. Through the use of L-cysteine, the measurements of sulfhydryl contents, and the reducing as well as non-reducing SDS-PAGE, our data further suggested that disulfide bond formation and/or cleavage probably play an important role in aggregation and/or precipitation of HGDC elicited by UV-C irradiation. CONCLUSIONS: Our findings highlight the close connections among disulfide bond cleavage and/or formation, intermolecular interactions, and the resultant formation of aggregates of HGDC induced by UV-C irradiation. The results from this research may not only contribute to the understanding of the environmental factors causing protein aggregation but also have implications for deciphering the molecular mechanism of cataractogenesis.

Photooxidation technology for correlative light and electron microscopy.

Correlative microscopic approaches combine the advantages of both light and electron microscopy. Here we show a correlative approach that uses the photooxidation capacity of fluorescent dyes. Through illumination with high energetic light, the chromogen diaminobenzidine is oxidized and stable deposits are formed at the sites of the former fluorescent signals, which after osmification are then visible in the electron microscope. The potential of the method is illustrated by tracing the endocytic pathway of three different ligands: the lipid ceramide, high density lipoproteins, and the lectin wheat germ agglutinin. The ligands were labeled either with BODIPY or Alexa dyes. Following cell surface binding, uptake, and time-dependent intracellular progression, the route taken by these molecules together with the organelles that have been visited is characterized. Correlative microscopic data are recorded at various levels. First, by fluorescence and phase contrast illumination with the light microscope, followed by the analysis of semithin sections after photooxidation, and finally of thin sections at the ultrastructural level.

Cultivation of a thermo-tolerant microalga in an outdoor photobioreactor: influences of CO2 and nitrogen sources on the accelerated growth.

A photobioreactor was designed to evaluate the performance of a newly isolated thermo-tolerant microalga Desmodesmus sp. F2 in municipal wastewater under tropical outdoor conditions. The environmental parameters, levels of nutrients, and growth rates were monitored during the cultivations to elucidate the factors that contributed to accelerated growth after lag phase. Cultures bubbled with CO(2)-air had about 20% higher yields than the air-bubbled culture, and 2% of CO(2) at a flux rate of 5L/min was sufficient to reach this increased yield. In the cultures bubbled with CO(2)-air, the microalgal cells preferentially utilized ammonium and nitrate, while the air-bubbled culture made greater use of ammonium and organic nitrogen. In conclusion, the factors required for microalga Desmodesmus sp. F2 to achieve accelerated growth in tropical outdoor conditions include (1) 2% CO(2) bubbling; (2) a level of ammonium higher than 100 µM; and (3) a level of nitrate higher than 400 µM.

Synthesis of zirconium dioxide by ultrasound assisted precipitation: effect of calcination temperature.

Nanostructured zirconium dioxide was synthesized from zirconyl nitrate using both conventional and ultrasound assisted precipitation in alkaline medium. The synthesized samples were calcinated at temperatures ranging from 400°C to 900°C in steps of 100°C. The ZrO(2) specimens were characterized using X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The thermal characteristics of the samples were studied via Differential Scanning Calorimetry-Thermo-Gravimetry Analysis (DSC-TGA). The influence of the calcination temperature on the phase transformation process from monoclinic to tetragonal to cubic zirconia and its consequent effect on the crystallite size and % crystallinity of the synthesized ZrO(2) was studied and interpreted. It was observed that the ultrasound assisted technique helped to hasten to the phase transformation and also at some point resulted in phase stabilization of the synthesized zirconia.