Anteriorly Tilted Coronal CT of Paranasal Sinuses for Endoscopic Sinus Surgery.

Conventional coronal CT scans of paranasal sinuses, aligned perpendicularly to the nasal floor, often deviate significantly from the endoscopic view during sinus surgery. This discrepancy complicates the interpretation of anatomical structures. In response, we propose the utilization of anteriorly tilted coronal CT slices to enhance anatomical understanding. These slices align more closely with the endoscopic view, fostering an intuitive grasp of paranasal sinus anatomy. This study aims to quantify the tilt of the endoscope to the nasal floor during endoscopic sinus surgery. To figure out the tilt of the endoscopically true coronal slices, we calculated the tilt of the endoscope to the nasal floor in the operative setting by taking pictures of the operation and measuring the image and sagittal CT. Fourteen patients (25 sides of paranasal sinuses) were analyzed. Endoscope tilts to the nasal floor were measured at different anatomical landmarks: 16.2 ± 9.7 degrees (lower edge of ground lamella), 29.8 ± 7.9 degrees (central ground lamella), 62.3 ± 10.1 degrees (most superior part), and 25.6 ± 7.0 degrees (optic canal). In conclusion, we showed the actual tilt of the endoscope to the nasal floor during endoscopic sinus surgery. A 30-degree anteriorly tilted coronal scan for frontal recess and sphenoid sinus is more intuitive than a traditional coronal scan, which helps surgeons understand the complex sinus anatomy.

Examination of ethmoidal roof regarding Keros and Yenigun classifications in a Turkish population: a computerized tomography study.

PURPOSE: Understanding ethmoid roof morphology is crucial to prevent complications in endoscopic sinus surgery. This study aimed to evaluate the morphological properties of the ethmoidal roof regarding gender and age differences using Keros and Yenigun classifications on high-resolution computed tomography images. METHODS: We retrospectively analyzed 891 high-resolution computed tomography paranasal sinus study images and measured the depth of the cribriform plate in coronal sections and the anterior-posterior length in axial planes. The study retrospectively examined CT images of paranasal sinuses of patients living in the eastern Anatolian region of Turkey. RESULTS: In both Keros and Yenigun Classifications, the most common class was type 2, and the least common class was type 3. According to Keros et al.'s method, no significant difference was observed between men and women (p = 0.698). However, according to Yenigun et al., the average values of women in terms of the anterior-posterior distance of the ethmoid roof were significantly higher than men (p = 0.001). When examined according to age, a very low, negative correlation was revealed regarding Keros and Yenigun classifications (p = 0.047 and p < 0.001 retrospectively). According to Keros and Yenigun's classification, there was no significant difference between the left and right sides (p = 0.488 and p = 0.919, respectively). CONCLUSION: The morphological properties of the ethmoidal roof have importance to be considered for preoperative planning. Studying larger patient groups and meta-analyses that gather various research results about this subject might help better understand the ethmoidal roof morphology among populations.

Validation of a three-dimensionally printed simulator for training in endoscopic sinonasal surgery.

BACKGROUND: The ability to incorporate different materials in the construction of 3-D printed models has resulted in the ability to mimic a variety of anatomical structures such as cartilage, mucosa and bone. The aim of this study was to evaluate the face and content validities of a model as a training tool for endoscopic sinus surgery. METHODS: Twenty-six delegates and ten teaching faculty members were invited to complete a post-hoc questionnaire survey. The survey consisted of a 22-question 5-point Likert scale to assess the model's realism (face validity) and its effectiveness as a training tool (content validity). RESULTS: Over 80% of the delegates agreed or strongly agreed that the appearance of anatomical structures within the model was realistic and mimicked actual sinus anatomy. In addition, a similar proportion agreed or strongly agreed that the application of instruments on the composite materials of the model realistically mimicked bone. All faculty agreed that the model was useful to develop hand-eye coordination and was a useful training tool for endoscopic sinus surgery. Overall, the sinus model received high scores regarding its use for training surgeons, especially to develop camera and instrument handling skills. CONCLUSION: The results of this study suggest that otolaryngology doctors in their early or intermediate stage of training would benefit most from a clinical-based modular programme. The model requires further development in areas such as the realism of mucosa, incorporation of sinonasal pathology and having more complex anatomy to be useful for the training of more advanced surgeons.

Comparison of Sinus Deposition from an Aqueous Nasal Spray and Pressurised MDI in a Post-Endoscopic Sinus Surgery Nasal Replica.

BACKGROUND: Optimising intranasal distribution and retention of topical therapy is essential for effectively managing patients with chronic rhinosinusitis, including those that have had functional endoscopic sinus surgery (FESS). This study presents a new technique for quantifying in vitro experiments of fluticasone propionate deposition within the sinuses of a 3D-printed model from a post-FESS patient. METHODS: Circular filter papers were placed on the sinus surfaces of the model. Deposition of fluticasone on the filter paper was quantified using high-performance liquid chromatography (HPLC) assay-based techniques. The deposition patterns of two nasal drug delivery devices, an aqueous nasal spray (Flixonase) and metered dose inhaler (Flixotide), were compared. The effects of airflow (0 L/min vs. 12 L/min) and administration angle (30° vs. and 45°) were evaluated. RESULTS: Inhaled airflow made little difference to sinus deposition for either device. A 45° administration angle improved frontal sinus deposition with the nasal spray and both ethmoidal and sphenoidal deposition with the inhaler. The inhaler provided significantly better deposition within the ethmoid sinuses (8.5x) and within the maxillary sinuses (3.9x) compared with the nasal spray under the same conditions. CONCLUSION: In the post-FESS model analysed, the inhaler produced better sinus deposition overall compared with the nasal spray. The techniques described can be used and adapted for in vitro performance testing of different drug formulations and intranasal devices under different experimental conditions. They can also help validate computational fluid dynamics modelling and in vivo studies.

Variations in Paranasal Sinus Anatomy in Children With Apert Syndrome: A Radiological Analysis.

BACKGROUND: Apert syndrome is a genetic disorder characterized by craniofacial abnormalities and premature closure of the coronal sutures. The restriction of cranial development may have a subsequent effect on paranasal anatomy development. AIM: The aim of the study was to gain an understanding of paranasal sinus anatomical variations seen in children with Apert syndrome. MATERIALS AND METHODS: This was a retrospective review of computed tomography and magnetic resonance images of children with Apert syndrome from 2000 to 2020. Images were reviewed to identify anatomical variations in paranasal sinus anatomy. RESULTS: Twenty-one patients were included in the study. The most commonly seen variation was septal deviation in 86% of cases, with 60% of patients having a septal defect. The presence of protrusion or dehiscence of the infraorbital nerve, carotid canal and Vidian nerve, and presence of a concha bullosa were not observed in any patients. Keros type I was the most commonly observed olfactory fossa depth in 79% of patients, and type I Kuhn cells were observed in 83% of patients. CONCLUSIONS: To our knowledge, this is the first study which describes the prevalence of variations in paranasal sinus anatomy found in children with Apert syndrome. Septal deviation, type I Kuhn cells and Keros type I olfactory fossa depth were observed in a higher prevalence in our cohort than in the general population. As such, assessment for the presence of chronic rhinosinusitis and nasal obstruction should be evaluated as part of the multidisciplinary assessment.

Pediatric paranasal sinuses-Development, growth, pathology, & functional endoscopic sinus surgery.

The paranasal sinuses (maxillary, frontal, ethmoid, and sphenoid sinuses) are complex anatomical structures. The development and growth of these have been investigated utilizing a number of different methods ranging from cadaveric analysis to modern cross sectional imaging with 3D modeling. An understanding of normal pediatric paranasal sinus embryology and development enables us to better determine when pathology may be affecting the normal developmental process. Cystic fibrosis, chronic sinusitis, deviated nasal septum and cleft lip and palate are some of the conditions which have been shown to effect paranasal sinus development to varying degrees. Functional endoscopic sinus surgery (FESS) is becoming increasingly common and an understanding of sinus anatomy together with when periods of rapid growth occur during childhood is important clinically. Although concerns have been raised regarding the impact of FESS on facial growth, there is limited evidence of this in regards to either changes in anthropomorphic measurements or clinical assessments of symmetry post operatively.

The skull of the Miocene Spheniscus urbinai (Aves, Sphenisciformes): osteology, brain morphology, and the cranial pneumatic systems.

Spheniscus urbinai represents one of four extinct Spheniscus species from the Cenozoic of southern South America, known from several poorly described diversely complete skulls and postcranial elements. Here, we present a review of the cranial osteology of all known specimens (collected in Argentina, Chile, and Peru), including a paleoneurological analysis using CT scans, and an exploration of its cranial pneumaticity compared to other extinct and living seabirds. Our results show that among Spheniscus species, S. urbinai exhibits slightly greater cranial pneumaticity than the living species. Additionally, we confirm previous findings which indicate that the marked reduction of cranial pneumaticity-which is characteristic of living penguins-occurred early during the Eocene (as observed in the Antarctic penguin MLP 12-I-20-1, but not in the coeval Anthropornis).

Anatomy of the paranasal sinuses of the common marmoset (Callithrix jacchus Linnaeus, 1758) and radiographic positioning for diagnosis of these structures.

BACKGROUND: Callithrix jacchus, it is a species highly targeted by wild animal traffickers and, when apprehended, they need veterinary care. For safe therapeutic procedures, knowledge of anatomy is essential, as well as for diagnostic by imaging, good radiographic positioning is essential. METHODS: The anatomy of the paranasal sinuses and the radiographic projections was described using 10 carcasses of common marmosets. Radiographs were taken in two panoramic views of their head: profile and frontal-naso. For the anatomical study, paramedian and transverse macroscopic sections and microscopic transverse sections were performed. RESULTS: On the radiographs, it was possible to identify the frontal recess and maxillary sinuses in profile and frontal-naso incidences. In the anatomical study, the frontal recess and maxillary, sphenoid and ethmoid paranasal sinuses were identified. CONCLUSIONS: The ethmoidal sinus could be observed only microscopically and the sphenoidal sinus difficult to see on the radiography due to the overlapping adjoining structures.

Volumetric measurements of paranasal sinuses and examination of sinonasal communication in healthy Shetland ponies: anatomical and morphometric characteristics using computed tomography.

BACKGROUND: Despite clinical importance and frequent occurrence of sinus disease, little is known about the size of paranasal sinuses and their communication in ponies and small horses. To examine the shape and volume of the paranasal sinuses and evaluate the sinonasal communication, three-dimensional (3D) reconstructions of computed tomography (CT) datasets of 12 healthy adult Shetland ponies were performed and analysed. Linear measurements of head length and width were taken. Using semi-automatic segmentation, 3D-models of all sinus compartments were created. Volumetric measurement of the seven sinus compartments were conducted and statistical analysis was performed. Sinus volumes were compared between the left and right sinuses and the relation to age and head size was evaluated. RESULTS: Structure and shape of the paranasal sinus system in Shetland ponies was similar to that of large horses. All seven sinus compartments on each side of the head were identified (rostral maxillary sinus, ventral conchal sinus, caudal maxillary sinus, dorsal conchal sinus, middle conchal sinus, frontal sinus, sphenopalatine sinus). The existence of a bilateral cranial and a caudal system formed by a maxillary septum was visible in all 12 individuals. The volumetric sizes of the left and right sinuses did not differ significantly (p > 0.05). A positive correlation between the size of the paranasal sinuses and the head length was shown. A relation between sinus volumes and age could not be proved in adult ponies aged > six years. Communication between single sinus compartments was identified. Furthermore, communication with the nasal cavity over the nasomaxillary aperture (Apertura nasomaxillaris) and a common sinonasal channel (Canalis sinunasalis communis) as well as its splitting up into a rostral and a caudolateral channel could be seen. Examination of the sinonasal communication was challenging and only a descriptive evaluation was possible. CONCLUSIONS: Our findings concerning the size, shape and volumetric dimensions of Shetland pony CT images could help improve CT interpretation of abnormal clinical cases as well as aiding clinicians to develop and select appropriate instruments for medical inspection and treatments.

Deposition of drugs in the nose and sinuses with an exhalation delivery system vs conventional nasal spray or high-volume irrigation in Draf II/III post-surgical anatomy.

BACKGROUND: Endoscopic sinus surgery is often performed to improve delivery of topical medication into sinus cavities. Intranasal steroids are guideline recommended in post-surgical patients, and experiments with cadavers suggest that surgery improves delivery of drug into sinuses. Exhalation delivery systems (EDS) use a new mechanism for intranasal delivery and have been shown to reach superior/posterior regions of the nasal cavity better than nasal sprays in unoperated patients. METHODS: Silicone casts of the nasal cavity and sinuses from a patient after Draf II, and then Draf III, were made from high-resolution computed tomography (CT) data using 3D printing. Internal surfaces were coated with liquid-sensitive, color-changing gel. Color changes were evaluated following conventional nasal spray delivery (0.1 mL x 2) (Nasonex), EDS delivery (0.1 mL x 2) (XHANCE), and high-volume, low-flow (HVLF) delivery (80 mL) with head tilted either 45° or 90°. RESULTS: Conventional nasal spray deposited liquid only in anterior nasal segments. EDS deposited liquid throughout the nasal cavity, in surgically opened ethmoid and maxillary spaces, at entrances of the frontal sinuses in Draf II geometry, and into frontal sinuses in Draf III. Tilted 45° HVLF delivery enters the maxillary sinuses but not the frontal sinuses or the ethmoid region. At full 90° inclination, HVLF delivery reaches most of the frontal and maxillary sinuses but not the roof and posterior wall of the ethmoid region. CONCLUSIONS: HVLF and EDS produced a deep intranasal/intrasinal deposition in the silicone cast compared with conventional nasal spray delivery; both deposited liquid inside the surgically opened sinuses. HVLF offers the benefit of lavage, whereas EDS may be more efficient and convenient.

Morphometric evaluation of the pterygoid hamulus and upper airway in patients with obstructive sleep apnea syndrome.

PURPOSE: Many anatomical factors are known to cause obstructive sleep apnea syndrome (OSAS), but only few studies have examined the relationship between the morphology of pterygoid hamulus (PH), upper airway, and OSAS severity. This study aimed to investigate the relationship between the severity of OSAS and PH morphology and other anatomical variations of the upper airway. METHODS: The data of the patients who underwent polysomnography and diagnosed with OSAS were retrospectively reviewed, and those who underwent paranasal sinus computed tomography were determined. The patients were divided into three groups according to the apnea-hypopnea index (AHI) scores obtained from the polysomnography (mild, moderate, and severe). The relationship between PH thickness, length and interpterygoid distance, and the severity of AHI was investigated. RESULTS: Seventy-four patients were included in the study. In patients with severe OSAS (1.83 ± 0.29 mm), the PH bone thickness was significantly thicker compared to those with mild OSAS (1.59 ± 0.36 mm) (p = 0.03). When the interpterygoid distance and its ratio to the velopharyngeal length were examined, it was found significantly shorter in patients with severe OSAS than mild cases (p < 0.001; p = 0.045, respectively). CONCLUSION: Our results showed that OSAS severity was associated with hamulus thickness, interpterygoid distance, and the ratio of interpterygoid distance to VL. Our study provides further insight into the pathophysiology of sleep apnea, suggesting that morphometric evaluation of the pterygoid hamulus and upper airway measurements can assist clinicians in stratifying and determining the best treatment options for patients with OSAS.

Equine Sinus Surgery.

The anatomy of the equine paranasal sinuses is critical to understand to assess the extent of the disease process, the optimal surgical approach, and the ability to drain through the normal nasomaxillary pathway. By following established anatomic landmarks, direct sinus access can be used to further explore the sinus compartments, remove compromised cheek teeth, remove any purulent debris or feed contamination, and establish drainage. Many complications can be avoided or minimized by thoroughly evaluating all sinus compartments and critically assessing the ability of the sinus to drain.

Equine Nasal Endoscopy: Treating Bullae Disease and Sinus Disease.

The nasal conchal bullae (dorsal and ventral) are separate, air-filled structures within their respective dorsal and ventral nasal conchae. Computed tomography scans have assisted with the increasing diagnosis of empyema of the nasal conchae. This condition is usually associated with dental or sinus disease. Drainage of affected bullae is considered critical for resolution of clinical signs. The ventral conchal bullae can be easily viewed with a standard 10 mm diameter flexible endoscopy via the middle nasal meatus. This approach can also be used for fenestration of the bullae, using a diode laser, equine laryngeal forceps, or bipolar vessel sealing device.

Anatomic variations of the paranasal sinuses in the general pediatric population.

BACKGROUND: The prevalence of sinuses' anatomic variations in the healthy pediatric population has not been studied. The study describes the prevalence of known anatomic variations with regard to gender and age in this population. METHODS: A single academic institute observational cohort study. A total of 200 head CT scans were reviewed, subdivided into five equal age subgroups (0-4.99; 5-7.99; 8-10.99; 11-13.99; 14-17 years), with an equal male to female ratio. Different subgroups were randomly assigned to two senior residents (100 CTs each). A senior rhinologist and radiologist were randomly selected to review 100 CTs each. Consensus was reached after a joint review. Each CT was evaluated for the presence of sinuses and the following variations: deviated septum, frontoethmoidal, infraorbital, posterior-ethmoid cells (Kuhn, Haller, and Onodi cells, respectively) and concha bullosa. Definitions were made according to the European Position on Rhinosinusitis 2012. RESULTS: Gender did not affect sinus development or anatomical variations. The frontal and sphenoid sinuses were significantly less developed in the 0-4.99 years group. The point prevalence of concha bullosa and deviated septum significantly increased with age. The point prevalence of Haller cells demonstrated borderline significance among age groups, with children 0-4.99 demonstrating the lowest point prevalence. A significant association was found between the existence of Haller cells to Kuhn and Onodi cells. CONCLUSIONS: Anatomical variations should be expected in the pediatric population. Familiarity with their point prevalence and associations may assist pediatric endoscopic sinus surgery planning.

Anatomical Characteristics of the Perpendicular Plate of the Ethmoid: An Analysis of Paranasal Sinus Computed Tomography via Three-Dimensional Reconstruction.

In recent years, the perpendicular plate of the ethmoid (PPE) has emerged as a new autogenous grafting material in rhinoplasty and septoplasty of nasal deviation. However, no studies have outlined the precise size, shape, and morphologic features of the PPE. Therefore, this study aimed to provide detailed information on the anatomical and morphologic characteristics of the PPE to assist surgeons in performing surgeries that are more precise. About 104 Chinese patients who underwent paranasal computed tomography were assessed in this study. By analyzing the features of the PPE reconstructed with 3-dimensional models, the characteristics of the PPE at different stages of development and according to sex were observed. The PPE had a flat shape, and its lower part was relatively thin. It usually developed horizontally with age, which contributed to expansion of the PPE area. The dimensions of the PPE were significantly larger in male patients than in female patients. Through the reconstruction and measurement of Chinese patients' PPE, the authors have established precise information about the PPE's anatomical and morphologic features. The flat shape and proper size, which are similar to those of nasal septum cartilage, make the PPE an ideal alternative to conventional autogenous grafting materials. The findings might be useful to surgeons in helping them perform surgeries that are more precise.

The Analysis of Computed Tomography of Paranasal Sinuses in Nasal Septal Deviation.

OBJECTIVES: Anatomic variations of paranasal sinuses are frequent among population that should be analyzed and interpreted accurately. The purpose of this study is to analyze anatomical variants and their relationships of paranasal sinuses in patients with nasal septal deviation undergoing septoplasty. METHODS: A total number of 150 patients (74 males, 76 females) with nasal septal deviation undergoing septal surgery were included in this retrospective study. The authors analyzed the direction and the angle of the nasal septal deviation, variations of the nasal turbinates, ethmoidal air cells, paranasal sinus pneumatization, accessory pneumatization of the paranasal complex and sphenoid sinus-related structures and the Keros, optic nerve and Vidian canal classification, and relationships between these structures in the paranasal computed tomography of the patients. RESULTS: The incidence of concha bullosa, Onodi cell, and anterior clinoid pneumatization were higher in patients with nasal septal deviation when compared with current literature. CONCLUSION: Physicians and surgeons dealing with the nose and maxillofacial region should be able to analyze paranasal computed tomography by themselves and must be aware of these variations during performing septal and craniomaxillofacial surgery.

Role of imaging in allergic rhinology.

Rhinitis is an underestimated clinical condition, which has a considerable impact on the quality of life of the affected patients. The subject of this review focuses on three fundamental aspects: the development of knowledge concerning anatomic landmarks, the development of radiological imaging technology, and developments that can make a difference in the treatment of allergic rhinitis. The anatomical study of paranasal sinuses has been conducted since the time of the ancient Egyptians. Development of radiological equipment from the early 1900s has helped to improve information on the morphology of paranasal sinuses, sufficient to be considered valuable information regarding frontal anatomy and its variability. Imaging has become increasingly important in the diagnosis and treatment of inflammatory diseases of the paranasal sinuses. In recent decades, radiology has helped to study this region as we have progressed from plain radiography to high-resolution Computed Tomography (HRCT). Subsequently, from radiologic imaging, digital volume tomography (DVT) has been developed, in high resolution and narrow section width. Currently, experience with third generation Cone-Beam Computed Tomography (CBCT) technologies provides useful information about bones, and it is now possible to highlight anatomical variants that involve bone structures. We still lack the ability to make a qualitative evaluation of soft tissues, as there are no Hounsfield levels in CBCT. However, this is a new area of research, and its application is evolving in an interesting manner, especially for soft-tissue allergic-inflammatory diseases.

Endoscopic endonasal approach to the vidian nerve and its relation to the surrounding structures: an anatomic cadaver study.

PURPOSE: The aim of this study was to investigate the neurovascular structures and their relevant anatomy with the endonasal endoscopic transpterygoid approach on fresh human cadavers. In addition, the relationship between the vidian nerve, ICA and surrounding structures were investigated METHODS: This study was carried out at an otolaryngology department of a tertiary medical center between June 2014 and June 2015. Ten fresh human cadavers were included in this study. Pterygopalatine fossa was explored via an endoscopic endonasal transpterygoid approach. Same surgical dissection procedures were performed on all cadavers: maxillary antrostomy, anterior and posterior ethmoidectomy, sphenoidotomy, transpterygoid pterygopalatine fossa and vidian canal dissection. RESULTS: Mean distance between the anterior nasal spine and ethmoidal crest was 60.35 ± 1.31 mm (range 59-64 mm). Mean distance between the sphenopalatine foramen and superior border of choana was 18.30 ± 1.38 mm (range 17-22 mm). Mean distance between the vidian canal and sphenopalatine foramen was 6.30 ± 0.47 mm (range 5.5-7 mm). Mean distance between the vidian canal and anterior nasal spine was 64.6 ± 1.71 mm (range 62-67 mm). Foramen rotundum was located superior lateral to the vidian canal in all specimens. Mean distance between foramen rotundum and vidian canal was 9.45 ± 0.60 mm (range 8.5-10.5 mm). Course of the greater palatine nerve was always medial to the descending palatine artery. The mean length of the vidian nerve from the petrous ICA to the point the nerve exits the vidian canal (vidian canal length) was 17.90 ± 1.59 mm (range 16-20 mm). CONCLUSIONS: The distances between the vidian canal and surrounding neurovascular structures would help the skull base surgeon in this narrow and complex area.

A novel three-dimensional-printed paranasal sinus-skull base anatomical model.

PURPOSE: A novel precision three-dimensional (3D)-printed paranasal sinus-skull base anatomical model was generated with a commercial grade desktop 3D printer. A specific page-turning pattern was employed in this model, to display the internal spatial structure of the paranasal sinus. METHODS: The CT image data of paranasal sinus were imported into the Mimics software to construct a 3D digital paranasal sinus-skull base model. Then, the model was sliced in the coronal position and loaded into the 3D printer to print each slice of the paranasal sinus-skull base model at a ratio of 1:1 in size. Based on CT image data, nine senior doctors assessed the simulation and accuracy of the anatomical structure features of the paranasal sinus-skull base, and the advantages and educational value of the 3D printing model using a seven-point Likert scale. RESULTS: A life-like 3D paranasal sinus-skull base structural model was successfully printed, with its internal spatial details clearly displayed. Nine senior doctors all thought that the profile of the printed anatomical structure was similar to that displayed by CT scan; however, the model provided more 3D spatial visual information. In addition, the model was considered to be of great value in the anatomy teaching and complicated surgery of the paranasal sinus-skull base, which had a material cost of only 3 dollars. CONCLUSIONS: The 3D printed paranasal sinus-skull base model has 3D visual functions, which provides a novel tool for anatomical studies on paranasal sinus, resident training, pre-surgical education and surgical planning.

Evaluation of superior concha bullosa by computed tomography.

OBJECTIVE: Concha bullosa is generally regarded as pneumatisation of the middle turbinate in the nose. However, pneumatisation may also be seen in the superior and inferior turbinate. Computed tomography (CT) of paranasal sinuses is extremely helpful for the examination of this inaccessible area. Coronal CT sections of paranasal sinuses are particularly useful for surgical anatomy, as these images show nearly the same regions as the endoscopic examinations. The aim of this retrospective study was to evaluate the presence, incidence and unilaterality-bilaterality of superior turbinate pneumatisation and concomitant nasal pathologies. METHODS: A total of 1000 patients who underwent CT of the paranasal sinuses because of headaches, nasal obstructions, anosmia, facial pain or facial trauma were evaluated retrospectively. RESULTS: Among the 1000 patients, superior pneumatized turbinate was seen on CT images of the paranasal sinuses in 149 (14.9%) cases. Of these patients, 84 were female, 65 were male, and the mean age was 38.14 years. Among 149 patients, 58 patients had bilateral superior pneumatized turbinate and the remaining 91 patients had unilateral superior pneumatized turbinate. 60.4% of the patients with superior pneumatized turbinate also had middle pneumatized turbinate. CONCLUSION: The superior pneumatized turbinate is an anatomical variation with an incidence ranging from 12.2 to 50%. The present study revealed that there is no relationship between volume size of the superior pneumatized turbinates and sinusitis, nasal septum deviation and paradoxical middle concha. It is very important to define anatomical variations in the preoperative CT evaluation of the paranasal sinuses.