Absence of lung tumor promotion with reduced tumor size in mice after inhalation of copper welding fumes.

Welding fumes are a Group 1 (carcinogenic to humans) carcinogen as classified by the International Agency for Research on Cancer. The process of welding creates inhalable fumes rich in iron (Fe) that may also contain known carcinogenic metals such as chromium (Cr) and nickel (Ni). Epidemiological evidence has shown that both mild steel (Fe-rich) and stainless steel (Fe-rich + Cr + Ni) welding fume exposure increases lung cancer risk, and experimental animal data support these findings. Copper-nickel (CuNi) welding processes have not been investigated in the context of lung cancer. Cu is intriguing, however, given the role of Cu in carcinogenesis and cancer therapeutics. This study examines the potential for a CuNi fume to induce mechanistic key characteristics of carcinogenesis in vitro and to promote lung tumorigenesis, using a two-stage mouse bioassay, in vivo. Male A/J mice, initiated with 3-methylcholanthrene (MCA; 10 µg/g), were exposed to CuNi fumes or air by whole-body inhalation for 9 weeks (low deposition-LD and high deposition-HD) and then sacrificed at 30 weeks. In BEAS-2B cells, the CuNi fume-induced micronuclei and caused DNA damage as measured by γ-H2AX. The fume exhibited high reactivity and a dose-response in cytotoxicity and oxidative stress. In vivo, MCA/CuNi HD and LD significantly decreased lung tumor size and adenomas. MCA/CuNi HD exposure significantly decreased gross-evaluated tumor number. In summary, the CuNi fume in vitro exhibited characteristics of a carcinogen, but in vivo, the exposure resulted in smaller tumors, fewer adenomas, less hyperplasia severity, and with HD exposure, less overall lung lesions/tumors.

TERT-independent telomere elongation and shelterin dysregulation after pulmonary exposure to stainless-steel welding fume in-vivo.

Telomeres are inert DNA sequences (TTAGGG) at the end of chromosomes that protect genetic information and maintain DNA integrity. Emerging evidence has demonstrated that telomere alteration can be closely related to occupational exposure and the development of various disease conditions, including cancer. However, the functions and underlying molecular mechanisms of telomere alteration and shelterin dysregulation after welding fume exposures have not been broadly defined. In this study, we analyzed telomere length and shelterin complex proteins in peripheral blood mononuclear cells (PBMCs) and in lung tissue recovered from male Sprague-Dawley rats following exposure by intratracheal instillation (ITI) to 2 mg/rat of manual metal arc-stainless steel (MMA-SS) welding fume particulate or saline (vehicle control). PBMCs and lung tissue were harvested at 30 d after instillation. Our study identified telomere elongation and shelterin dysregulation in PBMCs and lung tissue after welding fume exposure. Mechanistically, telomere elongation was independent of telomerase reverse transcriptase (TERT) activation. Collectively, our findings demonstrated that welding fume-induced telomere elongation was (a) TERT-independent and (b) associated with shelterin complex dysregulation. It is possible that an alteration of telomere length and its regulatory proteins may be utilized as predictive biomarkers for various disease conditions after welding fume exposure. This needs further investigation.

Laser tissue welding by using collagen excitation at a 1,720 nm near-infrared optical window III.

Laser tissue welding (LTW) is a method of fusing incised tissues together. LTW has the potential to revolutionize plastic surgery and wound healing techniques by its ability to produce watertight, scarless seals with minimal foreign body reaction. While using thermal mechanisms to achieve LTW, energy from the incident laser is absorbed by water in the tissue. As the water temperature increases, partial denaturing of the collagen triple helix briefly occurs, which is quickly followed by renaturation of collagen as the tissue cools, thus providing a watertight seal. This research study investigates the efficacy of direct collagen excitation at 1,720 nm to accomplish LTW. This wavelength falls within the near-infrared (NIR) optical window III. The tensile strengths of pig skin that have been welded with NIR continuous-wave (CW) diode lasers at 1,455 nm, which promote thermal mechanisms of tissue welding, and 1,720 nm wavelengths, are compared. Near-infrared lasers tuned to 1,455 and 1,720 nm were used to weld incised pieces of porcine skin together without extrinsic solders or dyes. The tensile force of the welded tissues was measured using a digital force gauge. The average tensile force of the welded pig skin using the 1,720 nm laser was approximately four times greater than that using the CW 1,455 nm laser, suggesting that LTW accomplished through direct collagen excitation in the NIR optical window III provides greater tensile strengths.

Factors influencing metal concentrations in hair and nails during longitudinal follow-up of apprentice welders.

The aim of this study was to determine factors influencing observed increased metal biomarkers of exposure levels in a group of 116 Quebec apprentice welders during a longitudinal follow-up of exposure. Analysis of 14 metals was carried out in hair, fingernail, and toenail samples taken from participants over the course of their welding curriculum at 6 different times. Personal and socio-demographic characteristics, lifestyle habits, and other potential confounding factors were documented by questionnaire. Multivariate linear mixed-effect models were used to assess main predictors of metal concentrations in each biological matrix including increasing time of exposure throughout the curriculum (defined as the repeated measure "time" variable"). Significant associations between repeated measure "time" variable and metal levels in hair, fingernails, and toenails were found for chromium, iron, manganese and nickel. Significant associations with "time" were also noted for arsenic levels in hair and fingernails, and for barium, cobalt and vanadium levels in fingernails and toenails. The repeated measure "time" variable, hence increasing time of exposure throughout the curriculum, was the predominant predictor of elevated biological metal levels. Reduced spaces and simultaneous activities such as oxyfuel-cutting and welding in the same welding room were suspected to contribute to higher metal levels. Age, ethnicity, and annual household income exerted an effect on metal levels and considered as confounders in the models. Variations observed in metal levels between hair and nails of apprentice welders also emphasized the relevance and importance of performing multi-matrix and multi-element biomonitoring to assess temporal variations in biological metal concentrations during welding curriculum.

Enhancement of keratinocyte survival and migration elicited by interleukin 24 upregulation in dermal microvascular endothelium upon welding-fume exposure.

Occupational exposure to welding fumes constitutes a serious health concern. Although the effects of fumes on the respiratory tract have been investigated, few apparent reports were published on their effects on the skin. The purpose of this study was to investigate the effects of exposure to welding fumes on skin cells, focusing on interleukin-24 (IL-24), a cytokine involved in the pathophysiology of skin conditions, such as atopic dermatitis and psoriasis. Treatment with welding fumes increased IL-24 expression and production levels in human dermal microvascular endothelial cells (HDMEC) which were higher than that in normal human epidermal keratinocytes. IL-24 levels in Trolox and deferoxamine markedly suppressed welding fume-induced IL-24 expression in HDMEC, indicating that oxidative stress may be involved in this cytokine expression. IL-24 released from HDMEC protected keratinocytes from welding fume-induced damage and enhanced keratinocyte migration. Serum IL-24 was higher in welding workers than in general subjects and was positively correlated with elevated serum levels of 8-hydroxy-2'-deoxyguanosine, an oxidative stress marker. In summary, welding fumes enhanced IL-24 expression in HDMEC, stimulating keratinocyte survival and migration. IL-24 expression in endothelial cells may act as an adaptive response to welding-fume exposure in the skin.

Welding fume exposure and prevalence of chronic respiratory symptoms among welders in micro- and small-scale enterprise in Akaki Kality sub-city, Addis Ababa, Ethiopia: a comparative cross-sectional study.

BACKGROUND: Exposure to welding fumes can lead to different respiratory health disorders, including lung cancer, due to long-term exposures. In Ethiopia, large numbers of people are engaged in the welding sector. Often, these workers are exposed to welding fumes at their workplaces, however, the level of exposure and its health effects have never been studied. OBJECTIVE: To measure the level of personal welding fume exposure and assess chronic respiratory symptoms and associated factors, among micro and small-scale enterprise metal workshop workers, in Akaki Kality Sub city, Ethiopia. METHODS: A comparative cross-sectional study involving 226 welders and 217 controls. Chronic respiratory symptoms were assessed using a standardized questionnaire adopted from the American Thoracic Society (ATS). Welding fumes were collected from the welder's breathing zone using 37 mm close-faced plastic cassettes fitted with Polyvinyl Chloride (PVC) filters connected to Casella pumps at an airflow rate of 2 L/min. RESULT: The overall prevalence of chronic respiratory symptoms among welders and controls were 54 (23.9%) and 20 (9.2%) respectively. The geometric mean and geometric standard deviation (GSD) of personal welding fume exposure, among welders was 5.98 mg/m3 (± GSD = 1.54). In this study, 53.3% of the samples exceeded the Occupational Exposure Limit defined by the American Conference of Governmental Industrial Hygiene. Chronic respiratory symptoms were significantly associated with educational status (Adjusted Odds Ratio (AOR): 5.11, 95% CI: 1.35, 19.33), respiratory protective equipment use (AOR: 3.33, 95% CI: 1.52, 7.31), safety training (AOR: 2.41, 95% CI: 1.10, 5.28), smoking (AOR:3.57, 95% CI: 1.54, 8.23), welding machine maintenance (AOR: 1.87, 95% CI: 1.01, 3.59) and welding site (i.e. indoors vs. outdoor) (AOR: 6.85. 95% CI: 2.36, 19.89). CONCLUSIONS: The prevalence of chronic respiratory symptoms among welding workers was significantly higher than controls. More than half of the samples exceeded the Occupational Exposure Limit. Educational status, implementation of safety training, and welding sites were significantly associated with chronic respiratory symptoms. The results suggested a need to reduce welding fume exposure to improve the respiratory health of the workers.

Impact of welding occupation on serum aluminium level and its association with physical health, cognitive function, and quality of life: a cross-sectional study.

OBJECTIVE: There is an occupational health concern about welders' inhalation of toxic aluminium fumes. We investigated whether serum aluminium level (SAL) and demographic variables can significantly predict physical health parameters, cognition, and quality of life (QoL) among welders. METHODS: The cross-sectional study involved 100 age- and location-matched men (50 welders and 50 non-welders). SAL obtained using a graphite furnace atomic absorption spectrometer, and data collected using blood pressure and body mass index (BMI) apparatuses, biodata form, pain rating scale, General Practitioner Assessment of Cognition, WHOQoL-BREF, and Nordic musculoskeletal symptoms (MSS) questionnaire were analysed using independent samples t test, chi-square, Pearson's correlation, and hierarchical linear regression. RESULTS: Welders had significantly higher SAL (mean difference [MD] = 1.77 µg/L, p < 0.001), lower QoL (MD = 3.92, p = 0.039), and higher prevalence of MSS on the neck (χ2 = 10.187, p = 0.001), shoulder (χ2 = 9.007, p = 0.003), upper back (χ2 = 6.832, p = 0.009), and knee (χ2 = 12.190, p < 0.001) than non-welders. There was a significant bivariate association between SAL, systolic blood pressure (ß = 0.313, p = 0.002), and BMI (ß = 0.279, p = 0.005), but not pain intensity, cognition, or QoL. SAL remained a significant predictor of systolic blood pressure after adjustment for physical health and QoL parameters (ß = 0.191, p = 0.044). The association between SAL and social QoL became significant after adjustment for physical health and other QoL domains (ß = - 0.210, p = 0.032) and demographic variables (ß = - 0.233, p = 0.046). CONCLUSION: Welders had significantly higher SAL, musculoskeletal symptoms, blood pressure, and lower QoL than non-welders. SAL was associated with adverse physical health parameters and social-related QoL, not cognition. We recommend routine aluminium bioavailability and physical health checks among welders.

Effects of occupational exposure to metal fume PM2.5 on lung function and biomarkers among shipyard workers: a 3-year prospective cohort study.

OBJECTIVE: This study investigates the associations of α1-antitrypsin, inter-α-trypsin inhibitor heavy chain (ITIH4), and 8-isoprostane with lung function in shipyard workers exposed to occupational metal fume fine particulate matter (PM2.5), which is known to be associated with adverse respiratory outcomes. METHODS: A 3-year follow-up study was conducted on 180 shipyard workers with 262 measurements. Personal exposure to welding fume PM2.5 was collected for an 8-h working day. Pre-exposure, post-exposure, and delta (∆) levels of α1-antitrypsin, ITIH4, and 8-isoprostane were determined in urine using enzyme-linked immunosorbent assays. Post-exposure urinary metals were sampled at the beginning of the next working day and analyzed by inductively coupled plasma-mass spectrometry. Lung function measurements were also conducted the next working day for post-exposure. RESULTS: An IQR increase in PM2.5 was associated with decreases of 2.157% in FEV1, 2.806% in PEF, 4.328% in FEF25%, 5.047% in FEF50%, and 7.205% in FEF75%. An IQR increase in PM2.5 led to increases of 42.155 µg/g in ∆α1-antitrypsin and 16.273 µg/g in ∆ITIH4. Notably, IQR increases in various urinary metals were associated with increases in specific biomarkers, such as post-urinary α1-antitrypsin and ITIH4. Moreover, increases in ∆ α1-antitrypsin and ∆ITIH4 were associated with decreases in FEV1/FVC by 0.008% and 0.020%, respectively, and an increase in ∆8-isoprostane resulted in a 1.538% decline in FVC. CONCLUSION: Our study suggests that urinary α1-antitrypsin and ITIH4 could indicate early lung function decline in shipyard workers exposed to metal fume PM2.5, underscoring the need for better safety and health monitoring to reduce respiratory risks.

Longitudinal changes in cardiovascular disease-related proteins in welders.

OBJECTIVE: Occupational exposure to welding fumes is linked to a higher risk of cardiovascular disease; however, the threshold exposure level is unknown. Here, we aimed to identify changes in proteins associated with cardiovascular disease in relation to exposure to welding fumes. METHODS: Data were obtained from two timepoints six years apart for 338 non-smoking men (171 welders, 167 controls); of these, 174 (78 welders, 96 controls) had measurements available at both timepoints. Exposure was measured as personal respirable dust (adjusted for personal protective equipment), welding years, and cumulative exposure. Proximity extension assays were used to measure a panel of 92 proteins involved in cardiovascular processes in serum samples. Linear mixed models were used for longitudinal analysis. The biological functions and diseases related to the identified proteins were explored using the Ingenuity Pathway Analysis software. RESULTS: At both timepoints, the median respirable dust exposure was 0.7 mg/m3 for the welders. Seven proteins were differentially abundant between the welders and controls and increased incrementally with respirable dust: FGF23, CEACAM8, CD40L, PGF, CXCL1, CD84, and HO1. CD84 was significant after adjusting for multiple comparisons. These proteins have been linked to disorders of blood pressure, damage related to clogged blood vessels, and chronic inflammatory disorders. CONCLUSION: Exposure to mild steel welding fumes below current occupational exposure limits for respirable particles and welding fumes in Europe and the US (1-5 mg/m3) was associated with changes in the abundance of proteins related to cardiovascular disease. Further research should evaluate the utility of these proteins as prospective biomarkers of occupational cardiovascular disease.

Risk of bladder, kidney and prostate cancer from occupational exposure to welding fumes: a systematic review and meta-analysis.

BACKGROUND: Our aimed to conduct a meta-analysis of cohort studies on risk of genitourinary (GU) cancers in workers exposed to welding fumes (WF). METHODS: We performed a systematic review of studies published on Pubmed, Scopus and Embase following PRISMA criteria. Two researchers selected cohort studies on WF exposure. From 2582 articles, 7 non-overlapping studies were included. Quality of studies was scored according to CASP. We run a random effects meta-analysis to calculate the relative risk (RR) and 95% confidence intervals (CI) of GU cancer, overall and stratified by cancer, country, and quality score. RESULTS: We included seven studies reporting results on GU cancers, including prostate, bladder and kidney cancer (PC, BC, and KC). The RR was 1.19 (95% CI = 1.07-1.32, 16 risk estimates) for GU cancer; 1.13 (95% CI = 0.90-1.42, 4 risk estimates) for PC; 1.26 (95% CI = 0.98-1.60, 7 risk estimates) for BC and 1.28 (95% CI = 1.12-1.47, 5 risk estimates) for KC. Heterogeneity was present in all meta-analyses (p < 0.001). The increased risk was more pronounced in North American than in European studies (respectively, OR = 1.35, 95% CI = 1.18-1.55; OR = 1.13, 95% CI = 1.01-1.27 p heterogeneity = 0.03). There was no heterogeneity according to quality score (p = 0.4). Data were insufficient to investigate associations by industry or welding type. Publication bias for each cancer was excluded. CONCLUSION: This meta-analysis suggests increased risk of KC and BC, but not of PC, in workers exposed to WF. Confounding by other occupational and non-occupational risk factors could not be excluded. Data were not adequate to address the risk of specific exposure circumstances.

Neurological and neurobehavioral effects of welders in Egypt exposed to manganese containing welding fumes.

PURPOSE: Welders are more likely to develop neurobehavioral disorders because of their exposure to neurotoxic metals such as manganese. This study aimed to measure the neurobehavioral performance of welders occupationally exposed to manganese at welding enterprises and its relationship with the workplace environment. METHODS: It is a comparative cross-sectional study carried out on 130 welders working at 50 welding enterprises in Menoufia governorate, Egypt, compared to 130 non-occupationally exposed controls. RESULTS: It was found that the environments of the studied welding enterprises had levels of respirable dust, manganese, and total welding fumes that exceeded internationally permissible limits. In addition, the mean blood manganese levels were significantly higher among welders (4.16 ± 0.61) than the controls (1.72 ± 0.41). Welders had a significantly higher prevalence of neurological manifestations and lower performance of neurobehavioral tests. Lower neurobehavioral performance among welders was significantly correlated with increased work duration and blood levels in some tests. CONCLUSION: To lessen the fumes in the breathing zone of workers, it is therefore strongly recommended to regularly wear high-quality personal protective equipment, especially masks, and to ensure proper ventilation.

Levels and control of welding fume exposure to total particulate, hexavalent chromium, and manganese in contracted activities in an oil refinery setting (2008-2018).

In response to increasing focus on occupational exposures to welding fume, a 10-year series of personal exposure measurements was analyzed for the two main welding processes (Shielded Metal Arc Welding or Stick and Tungsten Inert Gas welding or TIG) used in an oil refinery setting. Exposures from ancillary gouging and grinding were also analyzed. The operations were conducted under a permit-to-work system, which stipulated control measures in the form of ventilation and respiratory protective equipment (RPE) depending on the work environment, base metal, and welding process. The analysis focused on three health hazards of interest: total particulate (TP); hexavalent chromium (Cr (VI)); and manganese (Mn). The study's aims were the analysis of exposure levels related to operational conditions to verify the adequacy of required control measures and the generation of quantitative information for the development of predictive exposure models. Arithmetic mean exposures were 2.01 mg/m3 for TP (n = 94), 13.86 µg/m3 for Cr (VI) (n = 160), and 0.024 mg/m3 for Mn (n = 95). Requirements and practices for ventilation and use of RPE appeared adequate for maintaining exposure levels below maximum use concentrations. Predictive models for mean exposure levels were developed using multiple linear regression. Different patterns emerged for TP, Cr (VI), and Mn exposure determinants. Enclosed or confined work environments were associated with elevated exposure levels, regardless of the provision of local exhaust or general dilution ventilation. Carbon arc, used with gouging and grinding, contributed significantly to TP exposure (p = 0.006). The relative TP source strengths of the two main welding processes were comparable to the literature data. For Cr (VI), stick welding was associated with approximately 50-fold (p < 0.001) higher exposure potential than TIG welding. For Mn, this difference was approximately 2.5-fold. Differences were observed across the three analytes in exposure reduction efficiency of local exhaust ventilation (LEV) compared to natural ventilation, possibly due to ineffective use in confined spaces. These findings contribute to the overall understanding of TP, Cr (VI), and Mn exposures from welding and required controls in an oil refinery setting.

[Bibliometric and visual analysis of neurological damage caused by electrical welding operations].

Objective: To analyze and summarize the trends and hot spots in the field of neurological damage caused by electric welding operations, and to provide ideas for new researches by searching the domestic and international literature. Methods: In December 2022, using Web of Science Citation Index (Web of Science), China Journal Full-Text Database (CNKI) and Wanfang Database as search databases, literature search was conducted on the Chinese and English search terms related to eletrical welding operations and neurological damage. The bibliometric analysis software VOSviewer 1.6.18 and CiteSpace 6.1.6 were used to visualize the publication year, publication quantity, country, research institution and key words of the literature. Results: A total of 309 articles (112 in Chinese and 197 in English) were included in this study. The first domestic and international papers were published in 1976 and 1994 respectively, and the number of papers reached the peak in 2006 and 2018, and then showed a downward trend to varying degrees. In China, Shandong First Medical University (including Shandong Institute of Occupational Health and Occupational Disease Prevention and Shandong Academy of Medical Sciences) and Wuhan University of Science and Technology had the largest number of publications. The 309 articles were from 52 Chinese journals and 86 English journals. The co-occurrence analysis of key words showed that the domestic research mainly focused on eletrical welding operation, welding workers, neurobehavioral function and manganese, and the nervous system damage caused by manganese in welding smoke was the field of international attention. Long term exposure, risk, and performance were key buzzwords in the field. Conclusion: The research focus in the field of nervous system damage caused by electric welding operation has an obvious trend of time evolution, gradually transiting from clinical manifestations to its toxic mechanism and early biomarkers.

[Bioaccessibility characteristics of metals in welding fume and its application in exposure assessment].

Objective: To explore the bioaccessibility of the main metal components in welding fume welding fume in simulated lung fluid, and to evaluate the exposure level of each metal component in combination with the EPA inhalation exposure risk assessment model. Methods: In November 2022, the microscopic morphology characteristics of welding fumes were analyzed by scanning electron microscopy, the bioaccessibility of each metal component in lung fluid simulated normal and lung inflammatory states was analyzed by in vitro simulation method, and the exposure level of each metal component was calculated in combination with the EPA inhalation exposure risk assessment model. Results: The main metal components in carbon dioxide gas shielded welding fumes were Fe, Mn, Zn, Ti, Al, Cu, Cr, Cd, Ni and As, and the bioaccessibility in simulated normal lung interstitial fluid was 0.82%-1.84%, 5.07%-9.41%, 4.52%-7.23%, 5.10%-8.67%, 20.48%-29.60%, 5.27%-9.83%, 4.80%-7.56%, 0.07%-1.08%, 6.48%-13.84% and 33.02%-42.81%. The bioaccessibility of the above metal components in the lung fluid under simulated lung inflammation was 14.79%-27.45%, 34.53%-46.11%, 35.31%-59.13%, 16.45%-22.51%, 60.78%-76.51%, 26.58%-34.12%, 15.32%-25.87%, 2.0%-5.7%, 34.77%-43.33% and 71.34%-88.36%, respectively. Compared with the simulated lurg interstitial fluid, the bioaccessibility of metal components in the lung fluid under the simulated inflammatory state was increased, and the difference was statistically significant (P<0.05). The average daily exposure dose Mn in the two simulated lung fluids exceeded the inhalation reference limit (>50 times), and the average daily exposure dose Ti and Cr in the simulated lung inflammation exceeded the reference limit (>1.3 times) . Conclusion: Attention should be paid to the bioaccessibility characteristics of metal components in the exposure level and hazard assessment of welding fumes.

[Analysis of disease burden of welder's pneumoconiosis in Jiangsu Province].

Objective: To investigate the current status of disease burden and its influencing factors among welder's pneumoconiosis patients, and provide scientific basis for taking targeted intervention measures. Methods: From June 2022 to June 2023, the patients with welder's pneumoconiosis in Jiangsu Province were selected from 1956 to 2020 as the research objects, and disability adjusted life years (DALY) were used as the comprehensive index to study the disease burden. The direct and indirect economic losses caused by the diseases were calculated, and the factors affecting the disease burden were discussed by multiple linear regression method. Results: A total of 974 cases of welder's pneumoconiosis were reported in Jiangsu Province, the cumulative loss of DALY was 6300.73 person-years, and the per capita loss was 6.47 person-years. Among them, the healthy life years lost due to disability (YLD) was 6156.50 person-years (97.71%) , and the healthy life years lost due to premature death (YLL) was 144.23 person-years (2.29%) . Multiple linear regression analysis showed that the main factors affecting DALY were disability grade, diagnostic age, pneumoconiosis grade and length of dust exposure (P<0.05) . The total economic loss caused by 974 welder's pneumoconiosis patients was 1831838160.18 yuan, and the per capita loss was 1880737.33 yuan. Among them, the direct economic loss was 970917563.75 yuan (53.00%) , and the indirect economic loss was 860920596.43 yuan (47.00%) . Conclusion: Welder's pneumoconiosis causes serious disease burden to patients, and at the same time causes huge economic losses to individuals and society, which seriously hinders the development of society. Taking effective control measures to prevent the incidence of welder's pneumoconiosis is the key to reduce the disease burden.

Bipolar high-frequency electric welding in radical resection of frontal sinus tumors.

The aim of study is to develop a new method of connecting the dura mater (DM) defects in frontal sinus tumors with intracranial spread using high-frequency bipolar coagulation for welding of living tissues. Depending on the method of DM defect repair, patients were divided into two groups. The 1st group (control) included patients whose DM defect was connected according to the conventional method (suturing with polypropylene threads), in the 2nd group-the DM defect was connected by high-frequency bipolar electric welding using EKVZ-300, Patonmed. As a result of the study, the authors proposed an effective method of connecting the DM defects after the removal of frontal sinus tumors spreading intracranially. Such methods include a high-frequency bipolar electric welding method, the use of which contributed to a minimal destructive effect on adjacent tissues, but at the same time hermetically connected the DM. This was possible due to the supply of current with certain wave characteristics in a certain modulation at a temperature of 40-48°C, resulting in the connection of tissues without the formation of a coagulation scab due to the mechanism of protein-associated electrothermal adhesion of tissues. Presented data indicate significant advantages of using high-frequency bipolar electric welding the DM defects and fascia lata to restore the closed physiological circuit of cerebrospinal fluid circulation, compared to the traditional suture method. This approach has reduced intra- and post-operative complications, the time of surgery, and the length of the postoperative period.

Examination of the exposome in an animal model: The impact of high fat diet and rat strain on local and systemic immune markers following occupational welding fume exposure.

The goal of this study was to investigate the impact of multiple exposomal factors (genetics, lifestyle factors, environmental/occupational exposures) on pulmonary inflammation and corresponding alterations in local/systemic immune parameters. Accordingly, male Sprague-Dawley (SD) and Brown Norway (BN) rats were maintained on either regular (Reg) or high fat (HF) diets for 24wk. Welding fume (WF) exposure (inhalation) occurred between 7 and 12wk. Rats were euthanized at 7, 12, and 24wk to evaluate local and systemic immune markers corresponding to the baseline, exposure, and recovery phases of the study, respectively. At 7wk, HF-fed animals exhibited several immune alterations (blood leukocyte/neutrophil number, lymph node B-cell proportionality)-effects which were more pronounced in SD rats. Indices of lung injury/inflammation were elevated in all WF-exposed animals at 12wk; however, diet appeared to preferentially impact SD rats at this time point, as several inflammatory markers (lymph node cellularity, lung neutrophils) were further elevated in HF over Reg animals. Overall, SD rats exhibited the greatest capacity for recovery by 24wk. In BN rats, resolution of immune alterations was further compromised by HF diet, as many exposure-induced alterations in local/systemic immune markers were still evident in HF/WF animals at 24wk. Collectively, HF diet appeared to have a greater impact on global immune status and exposure-induced lung injury in SD rats, but a more pronounced effect on inflammation resolution in BN rats. These results illustrate the combined impact of genetic, lifestyle, and environmental factors in modulating immunological responsivity and emphasize the importance of the exposome in shaping biological responses.

Human biomonitoring and personal air monitoring. An integrated approach to assess exposure of stainless-steel welders to metal-oxide nanoparticles.

In welding, there is a potential risk due to metal-oxide nanoparticles (MONPs) exposure of workers. To investigate this possibility, the diameter and number particles concentration of MONPs were evaluated in different biological matrices and in personal air samples collected from 18 stainless-steel welders and 15 unexposed administrative employees engaged in two Italian mechanical engineering Companies. Exhaled breath condensate (EBC) and urine were sampled at pre-shift on 1st day and post-shift on 5th day of the workweek, while plasma and inhalable particulate matter (IPM) at post-shift on 5th day and analysed using the Single Particle Mass Spectrometry (SP-ICP-MS) technique to assess possible exposure to Cr2O3, Mn3O4 and NiO nanoparticles (NPs) in welders. The NPs in IPM at both Companies presented a multi-oxide composition consisting of Cr2O3 (median, 871,574 particles/m3; 70 nm), Mn3O4 (median, 713,481 particles/m3; 92 nm) and NiO (median, 369,324 particles/m3; 55 nm). The EBC of welders at both Companies showed Cr2O3 NPs median concentration significantly higher at post-shift (64,645 particles/mL; 55 nm) than at pre-shift (15,836 particles/mL; 58 nm). Significantly lower Cr2O3 NPs median concentration and size (7762 particles/mL; 44 nm) were observed in plasma compared to EBC of welders. At one Company, NiO NPs median concentration in EBC (22,000 particles/mL; 65 nm) and plasma (8248 particles/mL; 37 nm) were detected only at post-shift. No particles of Cr2O3, Mn3O4 and NiO were detected in urine of welders at both Companies. The combined analyses of biological matrices and air samples were a valid approach to investigate both internal and external exposure of welding workers to MONPs. Overall, results may inform suitable risk assessment and management procedures in welding operations.

Biomonitoring of exposure to multiple metal components in urine, hair and nails of apprentice welders performing shielded metal arc welding (SMAW).

Welding fumes are associated with various diseases. Increased air levels of metals were reported during welding. However, few multielement biomonitoring studies were conducted to assess the actual dose of metal components absorbed in apprentice welders in a learning environment. This research aimed to establish the nature and level of exposure to welding fumes and their metallic components in apprentice welders performing 'Shielded Metal Arc Welding' (SMAW), based on multi-element and multi-matrix analyses. A total of 86 apprentice welders were recruited in three different schools in Montreal, Québec, Canada. Twenty-one elements were measured in urine, hair, fingernail, and toenail samples collected at the beginning of the program and at the end of SMAW practical training. Concentrations of welding fumes and 12 metals were also determined in personal respirable air samples collected over a typical workday in a subgroup of 19 apprentices. Levels of manganese (Mn), iron (Fe) and nickel (Ni) in urine and Mn in hair were higher in samples taken at the end of the SMAW module compared to the beginning of training, while there was no significant difference for the other elements or for nail concentrations. Geometric mean concentrations [5th-95th percentiles] reached 0.31 [0.032-2.84], 9.4 [3.1-51] and 0.87 [0.35-3.1] µg/g creat. in post-shift urine, respectively, for Mn, Fe and Ni, and 0.37 [0.46-6.4] µg Mn/g hair at the end of SWAW. Median concentrations [5th-95th percentiles] were 29 [4.6-1200], 120 [27-3100] and 0.31 [

Compositional variations in metal nanoparticle components of welding fumes impact lung epithelial cell toxicity.

Welding fumes contain harmful metals and gas by-products associated with development of lung dysfunction, asthma, bronchitis, and lung cancer. Two prominent welding fume particulate metal components are nanosized iron (Fe) and manganese (Mn) which might induce oxidative stress and inflammation resulting in pulmonary injury. Welding fume toxicity may be dependent upon metal nanoparticle (NP) components. To examine toxicity of welding fume NP components, a system was constructed for controlled and continuous NP generation from commercial welding and customized electrodes with varying proportions of Fe and Mn. Aerosols generated consisted of nanosized particles and were compositionally consistent with each electrode. Human alveolar lung A459 epithelial cells were exposed to freshly generated metal NP mixtures at a target concentration of 100 µg/m3 for 6 hr and then harvested for assessment of cytotoxicity, generation of reactive oxygen species (ROS), and alterations in the expression of genes and proteins involved in metal regulation, inflammatory responses, and oxidative stress. Aerosol exposures decreased cell viability and induced increased ROS production. Assessment of gene expression demonstrated variable up-regulation in cellular mechanisms related to metal transport and storage, inflammation, and oxidative stress based upon aerosol composition. Specifically, interleukin-8 (IL-8) demonstrated the most robust changes in both transcriptional and protein levels after exposure. Interleukin-8 has been determined to serve as a primary cytokine mediating inflammatory responses induced by welding fume exposures in alveolar epithelial cells. Overall, this study demonstrated variations in cellular responses to metal NP mixtures suggesting compositional variations in NP content within welding fumes may influence inhalation toxicity.