RESUMEN
The respiratory mucus, a viscoelastic gel, effectuates a primary line of the airway defense when operated by the mucociliary clearance. In chronic respiratory diseases (CRDs), such as asthma, chronic obstructive pulmonary disease (COPD), and cystic fibrosis (CF), the mucus is overproduced and its solid content augments, changing its structure and viscoelastic properties and determining a derangement of essential defense mechanisms against opportunistic microbial (virus and bacteria) pathogens. This ensues in damaging of the airways, leading to a vicious cycle of obstruction and infection responsible for the harsh clinical evolution of these CRDs. Here, we review the essential features of normal and pathological mucus (i.e., sputum in CF, COPD, and asthma), i.e., mucin content, structure (mesh size), micro/macro-rheology, pH, and osmotic pressure, ending with the awareness that sputum biomarkers (mucins, inflammatory proteins and peptides, and metabolites) might serve to indicate acute exacerbation and response to therapies. There are some indications that old and novel treatments may change the structure, viscoelastic properties, and biomarker content of sputum; however, a wealth of work is still needed to embrace these measures as correlates of disease severity in association with (or even as substitutes of) pulmonary functional tests.
Asunto(s)
Asma , Fibrosis Quística , Enfermedad Pulmonar Obstructiva Crónica , Trastornos Respiratorios , Humanos , Moco/metabolismo , Trastornos Respiratorios/metabolismo , Sistema Respiratorio/metabolismo , Fibrosis Quística/metabolismo , Asma/metabolismo , Esputo/metabolismo , Enfermedad Pulmonar Obstructiva Crónica/metabolismo , Mucinas/metabolismoRESUMEN
Carbon nanostructures (CNSs) are attractive components to attain nanocomposites, yet their hydrophobic nature and strong tendency to aggregate often limit their use in aqueous conditions and negatively impact their properties. In this work, carbon nanohorns (CNHs), multi-walled carbon nanotubes (CNTs), and graphene (G) are first oxidized, and then reacted to covalently anchor the self-assembling tripeptide L-Leu-D-Phe-D-Phe to improve their dispersibility in phosphate buffer, and favor the formation of hydrogels formed by the self-organizing L-Leu-D-Phe-D-Phe present in solution. The obtained nanocomposites are then characterized by transmission electron microscopy (TEM), oscillatory rheology, and conductivity measurements to gain useful insights as to the key factors that determine self-healing ability for the future design of this type of nanocomposites.
RESUMEN
The influence of the physical, rheological, and process parameters on the cellulose nanocrystal (CNC) drops before and after external gelation in a CaCl2 solution was investigated. The dominant role of the CNC's colloidal suspension properties, such as the viscous force, inertial, and surface tension forces in the fluid dynamics was quantitatively evaluated in the formation of drops and jellified beads. The similarity and difference between the behavior of carbohydrate polymers and rod-like crystallites such as CNC were enlightened. Pump-driven and centrifugally-driven external gelation approaches were followed to obtain CNC hydrogel beads with tunable size and regular shape. A superior morphological control-that is, a more regular shape and smaller dimension of the beads-were obtained by centrifugal force-driven gelation. These results suggest that even by using a simple set-up and a low-speed centrifuge device, the extrusion of a colloidal solution through a small nozzle under a centrifugal field is an efficient approach for the production of CNC hydrogel beads with good reproducibility, control over the bead morphology and size monodispersion.
RESUMEN
PURPOSE: To develop a novel approach to monitor lung ventilation/inflammation in cystic fibrosis (CF) patients. Lung assessment in CF patients is relevant given that most patients succumb to respiratory failure. Respiratory functional tests (forced expiratory volume in the first second; FEV1 ) and inflammatory markers are used to test pulmonary ventilation/inflammation, respectively. However, FEV1 is effort dependent and might be uncomfortable for CF patients. Furthermore, inflammatory marker detection is costly and not rapid. To overcome these limitations, we propose the measurement, by means of low field nuclear magnetic resonance, of the spin-spin relaxation time (T2m ) of water hydrogens present in CF patient sputum. In CF sputum, different biological components are pathologically increased and inversely related to lung functionality. Moreover, we showed that these components alter in a dose-dependent manner the T2m in synthetic CF sputum. METHODS: Sputum samples were obtained from 42 CF subjects by voluntary expectoration; FEV1 , C-reactive protein (CRP), blood neutrophil counts together with cytokine (tumor necrosis factor alpha [TNFα], interleukin [IL]-1ß, IL-4, and vascular endothelial growth factor) quantifications were then evaluated. RESULTS: In sputum samples, we observe that T2m directly correlates (rFEV1 = 0.44; P < 10-4 ; 169 samples) with FEV1 . Moreover, T2m inversely correlates with the circulating inflammation markers CRP/neutrophil number (rCRP = -0.44, P < 10-4 ; rNC = -0.37, P < 2 * 10-4 ; 103 and 86 samples, respectively) and with the sputum inflammatory cytokines TNFα/IL-ß1 (rTNFα = -0.72, P < 10-4 ; rIL-1ß = -0.685, P < 10-4 ; 27 samples). T2m variations also correspond to FEV1 values over time in defined patients. CONCLUSION: These findings, together with the fast, reliable, and simple determination of T2m , make our approach a novel tool potentially usable in the real world of CF patients.
Asunto(s)
Fibrosis Quística , Neumonía , Biomarcadores , Proteína C-Reactiva , Fibrosis Quística/diagnóstico por imagen , Citocinas , Humanos , Inflamación , Espectroscopía de Resonancia Magnética , Esputo , Factor A de Crecimiento Endotelial VascularRESUMEN
PURPOSE: Development of a reliable, simple method to monitor lung condition in cystic fibrosis (CF) patients. Lung functionality assessment in CF patients is relevant, as most of them still die of respiratory failure. In lung mucus (sputum) of CF patients, components such as proteins, biopolymers, DNA, bacteria, and mucin are pathologically increased. As lung functionality is related to the amount of the pathological components in the sputum, their determination can help clinicians in monitoring lung condition and planning therapy. METHODS: Low-field NMR was used to evaluate the variation of the relaxation time (T2m ) of the water hydrogens present in CF sputum in relation to the amounts of the pathological components. Low-field NMR was tested in artificial samples (mucin or alginates), then in conditional sputum (saliva from healthy volunteers, added by different amounts of the pathological components), and finally in 12 patients' sputums, in which T2m was correlated to a commonly used lung monitoring test (i.e., forced expiratory volume in the first second). RESULTS: T2m significantly (P < 0.05) differed between samples with and without pathological components and between healthy and CF patients (P < 0.05), in which T2m correlated (r = 0.87) with FEV1 . CONCLUSIONS: The presented method can potentially become a valuable lung-monitoring tool in CF patients. Magn Reson Med 79:2323-2331, 2018. © 2017 International Society for Magnetic Resonance in Medicine.
Asunto(s)
Fibrosis Quística/diagnóstico por imagen , Pulmón/diagnóstico por imagen , Espectroscopía de Resonancia Magnética , Esputo/química , Adulto , Biopolímeros/química , ADN/análisis , Femenino , Humanos , Pulmón/microbiología , Masculino , Infecciones por Pseudomonas/diagnóstico por imagen , Pseudomonas aeruginosa , Esputo/microbiología , Agua , Adulto JovenRESUMEN
PURPOSE: This paper is based on the characterization of the rheological and Low Field NMR (LF-NMR) properties of an interpenetrated hydrogel made up by poly(N-vinyl-2-pyrrolidone) and sodium alginate. The final aim is to use the hydrogel as a delivery matrix for liposomes, widely used tools in the drug delivery field. METHODS: Rheology, LF-NMR, TEM, cryo-TEM, confocal laser scanning microscopy and release test were employed to characterize the interpenetrated hydrogel. Different theoretical approaches such as Flory, Chui, Scherer and Schurz theories were used to interpret the experimental results. RESULTS: We found that the crosslinking mechanisms of the two polymers produced an anti-synergistic effect on the final mechanical properties of the interpenetrated hydrogel. Instead of creating a continuous network, alginate formed isolated, cross-linked, clusters embedded in a continuous network of poly(N-vinyl-2-pyrrolidone). Additionally, gel structure significantly influenced liposome delivery. CONCLUSIONS: The rheological and LF-NMR characterization were confirmed and supported by the independent techniques TEM, cryo-TEM and release tests Thus, our findings reiterate the potentiality of both rheology and LF-NMR for the characterisation of soft materials such as interpenetrated polymeric networks.
Asunto(s)
Alginatos/química , Hidrogeles/química , Povidona/química , Sistemas de Liberación de Medicamentos/métodos , Liposomas/administración & dosificación , Espectroscopía de Resonancia Magnética/métodos , Reología/métodosRESUMEN
Despite the advances in anticancer therapies, their effectiveness for many human tumors is still far from being optimal. Significant improvements in treatment efficacy can come from the enhancement of drug specificity. This goal may be achieved by combining the use of therapeutic molecules with tumor specific effects and delivery carriers with tumor targeting ability. In this regard, nucleic acid-based drug (NABD) and particularly small interfering RNAs (siRNAs), are attractive molecules due to the possibility to be engineered to target specific tumor genes. On the other hand, polymeric-based delivery systems are emerging as versatile carriers to generate tumor-targeted delivery systems. Here we will focus on the most recent findings in the selection of siRNA/polymeric targeted delivery systems for hepatocellular carcinoma (HCC), a human tumor for which currently available therapeutic approaches are poorly effective. In addition, we will discuss the most attracting and, in our opinion, promising siRNA-polymer combinations for HCC in relation to the biological features of HCC tissue. Attention will be also put on the mathematical description of the mechanisms ruling siRNA-carrier delivery, this being an important aspect to improve effectiveness reducing the experimental work.
Asunto(s)
Carcinoma Hepatocelular , Sistemas de Liberación de Medicamentos/métodos , Neoplasias Hepáticas , Modelos Biológicos , Polímeros , ARN Interferente Pequeño , Animales , Carcinoma Hepatocelular/tratamiento farmacológico , Carcinoma Hepatocelular/genética , Carcinoma Hepatocelular/metabolismo , Carcinoma Hepatocelular/patología , Humanos , Neoplasias Hepáticas/tratamiento farmacológico , Neoplasias Hepáticas/genética , Neoplasias Hepáticas/metabolismo , Neoplasias Hepáticas/patología , Modelos Químicos , Polímeros/química , Polímeros/uso terapéutico , ARN Interferente Pequeño/química , ARN Interferente Pequeño/genética , ARN Interferente Pequeño/uso terapéuticoRESUMEN
Eight-armed PEG, molecular mass 10 kDa, was functionalized with furyl and maleimide groups, respectively; the obtained macromonomers were cross-linked via Diels-Alder chemistry. The mesh size (ξ) of the prepared hydrogels was determined by swelling studies, rheology, and low field NMR spectroscopy. The in vitro release of fluorescein isothiocyanate labeled dextrans (FDs) and bevacizumab was investigated. The average mesh size (ξavg) increased from 5.8 ± 0.1 nm to 56 ± 13 nm during degradation, as determined by swelling studies. The result of the rheological measurements (8.0 nm) matched the initial value of ξavg. Low field NMR spectroscopy enabled the determination of the mesh size distribution; the most abundant mesh size was found to be 9.2 nm. In combination with the hydrodynamic radius of the molecule (Rh), the time-dependent increase of ξavg was used to predict the release profiles of incorporated FDs applying an obstruction-scaling model. The predicted release profiles matched the experimentally determined release profiles when Rh < ξavg. However, significant deviations from the theoretical predictions were observed when Rh ≥ ξavg, most likely due to the statistical distribution of ξ in real polymer networks. The release profile of bevacizumab differed from those of equivalently sized FDs. The delayed release of bevacizumab was most likely a result of the globular structure and rigidity of the protein. The observed correlation between ξ and the release rate could facilitate the design of controlled release systems for antibodies.
Asunto(s)
Inhibidores de la Angiogénesis/metabolismo , Bevacizumab/metabolismo , Preparaciones de Acción Retardada/química , Dextranos/metabolismo , Fluoresceína-5-Isotiocianato/análogos & derivados , Hidrogeles/química , Maleimidas/química , Sistemas de Liberación de Medicamentos , Fluoresceína-5-Isotiocianato/metabolismo , Polietilenglicoles/químicaRESUMEN
Here we focus the attention on the physical characteristics of a highly biocompatible hydrogel made up of crosslinked alginate and Pluronic F127 (PF127). This is a composite polymeric blend we propose for artery endoluminal delivery of an emerging class of molecules named nucleic acid based drugs (NABDs). The physical characterization of our composite gel, i.e. mesh size distribution and PF127-alginate mutual organization after crosslinking, can significantly determine the NABDs release kinetics. Thus, to explore these aspects, different technical approaches, i.e. rheology, low/high field NMR and TEM, were used. While rheology provided information at the macroscopic and nano-level, the other three approaches gave details at the nano-level. We observe that Pluronic micelles, organizing in cubic ordered domains, generate, upon alginate crosslinking, the formation of meshes (≈ 150 nm) larger than those occurring in a Pluronic-free alginate network (≈ 25 nm). Nevertheless, smaller alginate meshes are still on and can just host un-structured Pluronic micelles and water. Accordingly, the gel structure is quite inhomogeneous, where big meshes (filled by crystalline Pluronic) co-exist with smaller meshes (hosting water and un-structured PF127 micelles). While big meshes offer a considerable hindering action on a diffusing solute, smaller ones represent a sort of free space where solute diffusion is faster. The presence of big and small meshes indicates that drug release may follow a double kinetics characterized by a fast and slow release. Notably, this behavior is considered appropriate for endoluminal drug release to the arterial wall.
Asunto(s)
Alginatos/química , Portadores de Fármacos/química , Geles/química , Micelas , Poloxámero/químicaRESUMEN
Agarose is a natural polysaccharide known for its ability to form thermoreversible hydrogels. While the effects of curing temperature and polysaccharide concentration on mechanical properties have been discussed in the literature, the role of ionic strength has been less studied. In the present manuscript, we investigate the effects of supporting salt concentration and the role of cation (i.e. Na+ or Li+, neighbors in the Hofmeister series), on the setting and performance of agarose hydrogels. Compressive and rheological measurements show that the supporting salts reduce the immediate elastic response of agarose hydrogels, with Li+ showing a stronger effect than Na+ at high ionic strength, while they significantly increase the extent of linear stress-strain response (i.e., linear elasticity). The presence of increasing amounts of added supporting salt also leads to a reduction in hysteresis during mechanical deformation due to loading and unloading cycles, which is more pronounced with Li+ than with Na+. The combination of rheological measurements and NMR relaxometry shows a mesh size in agarose hydrogels in the order of 6-17 nm, with a thickness of the water layer bound to the biopolymer of about 3 nm. Of note, the different structuring of the water within the hydrogel network due to the different alkali seems to play a role for the final performance of the hydrogels.
RESUMEN
Sildenafil citrate is an approved drug used for the treatment of erectile dysfunction and premature ejaculation. Despite a widespread application, sildenafil citrate shows numerous adverse cardiovascular effects in high-risk patients. Local transdermal drug delivery of this drug is therefore being explored as an interesting and noninvasive alternative administration method that avoids adverse effects arised from peak plasma drug concentrations. Although human and animal skin represents the most reliable models to perform penetration studies, they involve a series of ethical issues and restrictions. For these reasons new in vitro approaches based on artificially reconstructed human skin or "human skin equivalents" are being developed as possible alternatives for transdermal testing. There is little information, however, on the efficiency of such new in vitro methods on cutaneous penetration of active ingredients. The objective of the current study was to investigate the sildenafil citrate loaded in three commercial transdermal vehicles using 3D full-thickness skin equivalent and compare the results with the permeability experiments using porcine skin. Our results demonstrated that, while the formulation plays an imperative role in an appropriate dermal uptake of sildenafil citrate, the D coefficient results obtained by using the 3D skin equivalent are comparable to those obtained by using the porcine skin when a simple drug suspension is applied (1.17 × 10-10 ± 0.92 × 10-10 cm2/s vs 3.5 × 102 ± 3.3 × 102 cm2/s), suggesting that in such case, this 3D skin model can be a valid alternative for ex-vivo skin absorption experiments.
Asunto(s)
Prepucio , Piel , Masculino , Animales , Porcinos , Humanos , Citrato de Sildenafil/farmacología , Citrato de Sildenafil/uso terapéutico , Piel/metabolismo , Absorción Cutánea , Administración CutáneaRESUMEN
Benznidazole (BNZ) serves as the primary drug for treating Chagas Disease and is listed in the WHO Model List of Essential Medicines for Children. Herein, a new child-friendly oral BNZ delivery platform is developed in the form of supramolecular eutectogels (EGs). EGs address BNZ's poor oral bioavailability and provide a flexible twice-daily dose in stick-pack format. This green and sustainable formulation strategy relies on the gelation of drug-loaded Natural Deep Eutectic Solvents (NaDES) with xanthan gum (XG) and water. Specifically, choline chloride-based NaDES form stable and biocompatible 5 mg/mL BNZ-loaded EGs. Rheological and Low-field NMR investigations indicate that EGs are viscoelastic materials comprised of two co-existing regions in the XG network generated by different crosslink distributions between the biopolymer, NaDES and water. Remarkably, the shear modulus and relaxation spectrum of EGs remain unaffected by temperature variations. Upon dilution with simulated gastrointestinal fluids, EGs results in BNZ supersaturation, serving as the primary driving force for its absorption. Interestingly, after oral administration of EGs to rats, drug bioavailability increases by 2.6-fold, with a similar increase detected in their cerebrospinal fluid. The noteworthy correlation between in vivo results and in vitro release profiles confirms the efficacy of EGs in enhancing both peripheral and central BNZ oral bioavailability.
Asunto(s)
Disponibilidad Biológica , Nitroimidazoles , Polisacáridos Bacterianos , Animales , Administración Oral , Nitroimidazoles/administración & dosificación , Nitroimidazoles/farmacocinética , Nitroimidazoles/química , Polisacáridos Bacterianos/química , Masculino , Sistemas de Liberación de Medicamentos/métodos , Ratas , Tripanocidas/administración & dosificación , Tripanocidas/farmacocinética , Tripanocidas/química , Geles , Solventes/química , Ratas Sprague-Dawley , Reología , Liberación de Fármacos , Colina/química , Colina/administración & dosificación , Colina/farmacocinéticaRESUMEN
The focus of this work is on the characterization of hydrophobically-modified polyethylene glycol hydrogels, to be used as drug delivery systems, by means of the combined used of rheology and low field Nuclear Magnetic Resonance. Indeed, these two techniques allowed understanding how the transient physical bonds deriving from hydrophobic association superimpose to the pre-existing covalent bonds. We found that the improvement of physical bonds can be achieved not only by increasing the content of hydrophobic segments but also by using thermal treatments after hydrogel preparation. Moreover, we proved the reliability of an overall interpretative model linking the dependence of the shear modulus and the average magnetic relaxation time. Finally, we proposed a new mathematical approach for the determination of the magnetic relaxation spectrum. This approach reduced the computational heaviness of the procedure and allowed to easily discern the different contributes nested in the overall magnetic relaxation spectrum, an aspect that the traditional approach cannot provide directly.
Asunto(s)
Materiales Biocompatibles , Sistemas de Liberación de Medicamentos , Reproducibilidad de los Resultados , Materiales Biocompatibles/química , Espectroscopía de Resonancia Magnética , Hidrogeles/química , Reología , Polietilenglicoles/químicaRESUMEN
Drug-loaded emulsions for spray drying should be optimised for their rheological behaviour and stability under operating conditions, as this is essential for achieving the desired physicochemical properties of the final dry product. Our aim was therefore to investigate the structure and stability of a water-in-oil (W/O) emulsion containing vancomycin hydrochloride as the active ingredient in the aqueous phase, poly(d,l-lactide-co-glycolide) as the structural polymer in the dichloromethane-based organic phase, and various stabilisers using low-field nuclear magnetic resonance (LF NMR) and rheological characterisation. Four emulsions were tested, namely-one without stabiliser, one with Poloxamer® 407, one with chitosan and Span™ 80 and one with chitosan only. The theoretical interpretation of the rheological data allowed the determination of the velocity and the shear rate/stress profiles inside the feed path of the W/O emulsion, aspects that are critical for the industrial scale-up of the emulsion drying process. In addition, LF NMR demonstrated that shaking was sufficient to restore the original emulsion structure and that the droplet size of all emulsions was in the range of 1-10 µm, although the emulsion with chitosan had the narrowest droplet size distribution and the higher zero shear viscosity, which accounts for the increased long-term stability due to impeded droplets movement.
Asunto(s)
Quitosano , Agua , Agua/química , Copolímero de Ácido Poliláctico-Ácido Poliglicólico , Emulsiones/química , Secado por Pulverización , Espectroscopía de Resonancia Magnética , Reología , Tamaño de la PartículaRESUMEN
A cryogel is a cross-linked polymer network with different properties that are determined by its manufacturing technique. The formation of a cryogel occurs at low temperatures and results in a porous structure whose pore size is affected by thermal conditions. The adjustable pore sizes of cryogels make them attractive for diverse applications. In this study, the influence of the external operational temperature, which affects the cooling and freezing rates, on the production of cryogels with 2% w/w agarose is investigated. Moreover, a mathematical model is developed to simulate the cryogel production process and provide an initial estimate of the pore size within the structure. The predictions of the model, supported by qualitative light microscopy images, demonstrate that cryogels produced at higher process temperatures exhibit larger pore sizes. Moreover, the existence of pore size distribution within the gel structure is confirmed. Finally, stress relaxation tests, coupled with an image analysis, validates that cryogels produced at lower temperatures possess a higher stiffness and slower water release rates.
RESUMEN
Hepatocellular carcinoma (HCC) remains a global health challenge, representing the third leading cause of cancer deaths worldwide. Although therapeutic advances have been made in the few last years, the prognosis remains poor. Thus, there is a dire need to develop novel therapeutic strategies. In this regard, two approaches can be considered: (1) the identification of tumor-targeted delivery systems and (2) the targeting of molecule(s) whose aberrant expression is confined to tumor cells. In this work, we focused on the second approach. Among the different kinds of possible target molecules, we discuss the potential therapeutic value of targeting non-coding RNAs (ncRNAs), which include micro interfering RNAs (miRNAs), long non-coding RNAs (lncRNAs) and circular RNAs (circRNAs). These molecules represent the most significant RNA transcripts in cells and can regulate many HCC features, including proliferation, apoptosis, invasion and metastasis. In the first part of the review, the main characteristics of HCC and ncRNAs are described. The involvement of ncRNAs in HCC is then presented over five sections: (a) miRNAs, (b) lncRNAs, (c) circRNAs, (d) ncRNAs and drug resistance and (e) ncRNAs and liver fibrosis. Overall, this work provides the reader with the most recent state-of-the-art approaches in this field, highlighting key trends and opportunities for more advanced and efficacious HCC treatments.
RESUMEN
A simple relation between pendant groups of polymers in hydrogels is introduced to determine the crosslink density of (complex) hydrogel systems (mixtures of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) modified nanocellulose, alginate, scleroglucan and Laponite in addition of crosslinking agents). Furthermore, the rheological properties and their great potential connection to design complex hydrogel systems with desired properties have been thoroughly investigated. Hydrogel structures governing internal friction and flow resistance were described by the predominant effect of ionic, hydrogen, and electrostatic interactions. The relationship between rheological properties and polymer-polymer interactions in the hydrogel network is explained and expressed in a new mathematical model for determining the crosslink density of (crosslinked) hydrogels based on single or mixture of polymer systems. In the end, the combined used of rheology and low field nuclear magnetic resonance spectroscopy (LF-NMR) for the characterization of hydrogel networks is developed.
RESUMEN
The study of bone morphology is of great importance as bone morphology is influenced by factors such as age and underlying comorbidities and is associated with bone mechanical properties and fracture risk. Standard diagnostic techniques used in bone disease, such as Dual-Energy X-ray absorptiometry and ultrasonography do not provide qualitative and quantitative morphological information. In recent years, techniques such as High Resolution Computed Tomography (HR-CT), micro- CT, Magnetic Resonance Imaging (MRI), and Low Field Nuclear Magnetic Resonance (LF-NMR) have been developed for the study of bone structure and porosity. Data obtained from these techniques have been used to construct models to predict bone mechanical properties thanks to finite element analysis. Cortical porosity has been extensively studied and successfully correlated with disease progression and mechanical properties. Trabecular porosity and pore size distribution, however, have increasingly been taken into consideration to obtain a comprehensive analysis of bone pathology and mechanic. Therefore, we have decided to evaluate the ability of micro- CT (chosen for its high spatial resolving power) and LF-NMR (chosen to analyze the behavior of water molecules within trabecular bone pores) to characterize the morphology of trabecular bone in osteoporosis. Trabecular bone samples from human femoral heads collected during hip replacement surgery were from osteoporosis (test group) and osteoarthritis (control group) patients. Our data show that both micro- CT and LF-NMR can detect qualitative changes in trabecular bone (i.e., transition from plate-like to rod-like morphology). Micro- CT failed to detect significant differences in trabecular bone morphology parameters between osteoporotic and osteoarthritic specimens, with the exception of Trabecular Number and Connectivity Density, which are markers of osteoporosis progression. In contrast, LF-NMR was able to detect significant differences in porosity and pore size of trabecular bone from osteoporotic versus osteoarthritic (control) samples. However, only the combination of these two techniques allowed the detection of structural morphometric changes (increase in the larger pore fraction and enlargement of the larger pores) in the trabecular bone of osteoporotic specimens compared to osteoarthritic ones. In conclusion, the combined use of LF-NMR and micro- CT provides a valuable tool for characterizing the morphology of trabecular bone and may offer the possibility for a new approach to the study and modeling of bone mechanics in the context of aging and disease.
Asunto(s)
Hueso Esponjoso , Imagen por Resonancia Magnética , Hueso Esponjoso/diagnóstico por imagen , Humanos , Espectroscopía de Resonancia Magnética , Porosidad , Microtomografía por Rayos XRESUMEN
The correlation between in vivo and in vitro data is yet not sufficiently optimized to allow a significant reduction and replacement of animal testing in pharmaceutical development. One of the main reasons for this lies in the poor mechanistic understanding and interpretation of the physical mechanisms enabling formulation rely on for deploying the drug. One mechanism that still lacks a proper interpretation is the kinetics of drug release from nanocarriers. In this work, we investigate two different types of classical enabling formulations - i) cyclodextrin solutions and ii) liposomal dispersions - by a combination of an experimental method (i.e. UV-Vis localized spectroscopy) and mathematical modelling/numerical data fitting. With this approach, we are able to discriminate precisely between the amount of drug bound to nanocarriers or freely dissolved at any time point; in addition, we can precisely estimate the binding and diffusivity constants of all chemical species (free drug/bound drug). The results obtained should serve as the first milestone for the further development of reliable in vitro/in silico models for the prediction of in vivo drug bioavailability when enabling formulations are used.
Asunto(s)
Ciclodextrinas , Agua , Animales , Ciclodextrinas/química , Difusión , Cinética , Liposomas/química , Agua/químicaRESUMEN
Herein, we describe the synthesis of the first boron nitride-doped polyphenylenic material obtained through a [4 + 2] cycloaddition reaction between a triethynyl borazine unit and a biscyclopentadienone derivative, which undergoes organogel formation in chlorinated solvents (the critical jellification concentration is 4% w/w in CHCl3). The polymer has been characterized extensively by Fourier-transform infrared spectroscopy, solid-state 13C NMR, solid-state 11B NMR, and by comparison with the isolated monomeric unit. Furthermore, the polymer gels formed in chlorinated solvents have been thoroughly characterized and studied, showing rheological properties comparable to those of polyacrylamide gels with a low crosslinker percentage. Given the thermal and chemical stability, the material was studied as a potential support for solid-state electrolytes. showing properties comparable to those of polyethylene glycol-based electrolytes, thus presenting great potential for the application of this new class of material in lithium-ion batteries.