Fundamental Limits of the Spatial Control of Heterogeneous Nucleation on Biphilic Surfaces.

Condensation of water vapor on nonwetting surfaces, termed dropwise condensation, leads to rapid droplet removal and significantly improves heat transfer compared to wetting surfaces. However, the spatial distribution of heterogeneous nucleation sites during dropwise condensation is random. Furthermore, the low surface energy of the nonwetting substrate reduces the nucleation rate as predicted by classical nucleation theory. To achieve higher nucleation rates, biphilic surfaces having low nucleation energy barriers that rely on spatial heterogeneity of surface chemistry have been developed. Here, we use a robust method to create biphilic surfaces on flat and micropillar samples having various dimensions (pillar lengths: 10-15 µm, pillar heights: 0-15 µm) by utilizing lift-off microfabrication. Our fabrication approach leads to hydrophilic pillar tops and hydrophobic pillar sides and surrounding basal areas. To study water vapor condensation on the biphilic surfaces, we utilized optical microscopy in a controlled temperature and humidity environment. Interestingly, our studies show that while the majority of nucleation (≈100%) occurred only on the hydrophilic areas (pillar tops) for small pillar center-to-center spacing (pitch), the spatial control of heterogeneous nucleation broke down when the pitch increased. For larger pitches, we observed the nucleation of water droplets on the hydrophobic base in conjunction with hydrophilic pillar tops. Using theoretical models of vapor diffusion coupled with heat transfer and three-dimensional (3D) numerical simulations, we show that nucleation initiation on hydrophilic pillar tops leads to the formation of dry zones, preventing nucleation on hydrophobic regions. However, with increasing pitch, part of the hydrophobic region no longer feels the presence of the vapor depletion zone, resulting in subsequent nucleation at defect sites on the hydrophobic regions at the base. Our study offers insights into the fundamental limitations of biphilic condensation and offers avenues for their further improvement for applications such as boiling, icing, evaporation, and condensation.

Characterization of chemoresistant human non-small cell lung cancer cells by metabolic and lipidomic profiling.

INTRODUCTION: Lung cancer is one of the most malignant cancers and the leading cause of cancer-related deaths worldwide, while acquired chemoresistance would represent a major problem in the treatment of non-small cell lung cancer (NSCLC) because of the reduced treatment effect and increased rates of recurrence. METHODS: To establish the chemoresistant NSCLC cells, doxorubicin was treated to A549 cells over 3 months at gradually increasing concentrations from 0.03 to 0.5 µM. Real-time PCR and Western blotting were employed for investigating mRNA and protein expression of the glutathione peroxidase (GPX) protein family and multidrug resistance protein 1 (MRP1) in A549 and A549/CR cells. We also employed gas chromatography mass-spectrometry and nano electrospray ionization mass-spectrometry coupled with multivariate statistical analysis to characterize the unique metabolic and lipidomic profiles of chemoresistant NSCLC cells in order to identify potential therapeutic targets. RESULTS: Reactive oxygen species levels were decreased, and mRNA and protein levels of GPX2 and multidrug resistance protein 1 (MRP1) were increased in A549/CR. We identified 87 metabolites and intact lipid species in A549 and A549/CR. Among these metabolites, lactic acid, glutamic acid, glycine, proline, aspartic acid, succinic acid, and ceramide, alongside the PC to PE ratio, and arachidonic acid-containing phospholipids were suggested as characteristic features of chemoresistant NSCLC cells (A549/CR). CONCLUSIONS: This study reveals characteristic feature differences between drug-resistance NSCLC cells and their parental cells. We suggest potential therapeutic targets in chemoresistant NSCLC. Our results provide new insight into metabolic and lipidomic alterations in chemoresistant NSCLC. This could be used as fundamental information to develop therapeutic strategies for the treatment of chemoresistant NSCLC patients.

End Group Functionality of 95-99%: Epoxide Functionalization of Polystyryl-Lithium Evaluated via Solvent Gradient Interaction Chromatography.

End group functionality is a key parameter of functional polymer chains. The end-capping efficiency of living polystyryl lithium with various epoxides, namely ethylene oxide (EO), ethoxy ethyl glycidyl ether (EEGE) and isopropylidene glyceryl glycidyl ether (IGG), is investigated with solvent gradient interaction chromatography (SGIC). Generally, end-capping efficiencies >95% are observed. Hydroxy functional polystyrene (PS-OH, PS-EEGE-OH, and PS-IGG-OH) with molar masses ranging from 13.8 to 15.0 kg mol-1 are obtained, with dispersities of 1.05-1.06. Deprotection of the acetal (PS-EEGE-OH) and ketal protective group (PS-IGG-OH) is investigated. Nearly quantitative deprotection (>99%) resulting in the corresponding multihydroxy functional PS (PS-(OH)2 and PS-(OH)3 ) are observed via SGIC. Esterification of PS-OH with succinic anhydride shows a conversion of 98% to the corresponding ester. A detailed picture of side reactions during the carbanionic polymer synthesis subsequent epoxide termination is obtained, demonstrating 95-99% terminal functionality. Depending on the polarity of the end group, an elution order of PS-OH < PS-(OH)2  < PS-(OH)3  < PS-COOH is obtained in SGIC. The study demonstrates both the analytical power of SGIC and the exceptionally high terminal functionalization efficiency of anionic polymerization methods.

Nonlinear rheometry of entangled polymeric rings and ring-linear blends.

We present a comprehensive experimental rheological dataset for purified entangled ring polystyrenes and their blends with linear chains in nonlinear shear and elongation. In particular, data for shear stress growth coefficient, steady-state shear viscosity, and first and second normal stress differences are obtained and discussed as functions of shear rate as well as molecular parameters (molar mass, blend composition and decreasing molar mass of linear component in blend). Over the extended parameter range investigated, rings do not exhibit clear transient undershoot in shear, in contrast to their linear counterparts and ring-linear blends. For the latter, the size of the undershoot and respective strain appear to increase with shear rate. Universal scaling of strain at overshoot and fractional overshoot (ratio of maximum to steady-state shear stress growth coefficient) indicates subtle differences in the shear-rate dependence between rings and linear polymers or their blends. The shear thinning behaviour of pure rings yields a slope nearly identical to predictions (-4/7) of a recent shear slit model and molecular dynamics simulations. Data for the second normal stress difference are reported for rings and ring-linear blends. While N 2 is negative and its absolute value stays below that of N 1 , as for linear polymers, the ratio -N 2 /N 1 is unambiguously larger for rings compared to linear polymer solutions with the same number of entanglements (almost by factor of two), in agreement with recent non-equilibrium molecular dynamics simulations. Further, -N 2 exhibits slightly weaker shear rate dependence compared to N 1 at high rates, and the respective power-law exponents can be rationalized in view of the slit model (3/7) and simulations (0.6), although further work is needed to unravel the molecular original of the observed behaviour. The comparison of shear and elongational stress growth coefficients for blends reflects the effect of ring-linear threading which leads to significant viscosity enhancement in elongation. Along the same lines, the elongational stress is much larger than the first normal stress in shear, and their ratio is much larger for rings and ring-linear blends compared to linear polymers. This conforms the interlocking scenario of rings and their important role in mechanically reinforcing linear matrices.

Activation of Persulfate by Nanosized Zero-Valent Iron (NZVI): Mechanisms and Transformation Products of NZVI.

The mechanisms involved in the activation of persulfate by nanosized zero-valent iron (NZVI) were elucidated and the NZVI transformation products identified. Two distinct reaction stages, in terms of the kinetics and radical formation mechanism, were found when phenol was oxidized by the persulfate/NZVI system. In the initial stage, lasting 10 min, Fe0(s) was consumed rapidly and sulfate radicals were produced through activation by aqueous Fe2+. The second stage was governed by Fe catalyzed activation in the presence of aqueous Fe3+ and iron (oxyhydr)oxides in the NZVI shells. The second stage was 3 orders of magnitude slower than the initial stage. An electron balance showed that the sulfate radical yield per mole of persulfate was more than two times higher in the persulfate/NZVI system than in the persulfate/Fe2+ system. Radicals were believed to be produced more efficiently in the persulfate/NZVI system because aqueous Fe2+ was supplied slowly, preventing sulfate radicals being scavenged by excess aqueous Fe2+. In the second stage, the multilayered shell conducted electrons, and magnetite in the shell provided electrons for the activation of persulfate. Iron speciation analysis (including X-ray absorption spectroscopy) results indicated that a shrinking core/growing shell model explained NZVI transformation during the persulfate/NZVI process.

Results of Database Studies in Spine Surgery Can Be Influenced by Missing Data.

BACKGROUND: National databases are increasingly being used for research in spine surgery; however, one limitation of such databases that has received sparse mention is the frequency of missing data. Studies using these databases often do not emphasize the percentage of missing data for each variable used and do not specify how patients with missing data are incorporated into analyses. This study uses the American College of Surgeons National Surgical Quality Improvement Program (ACS-NSQIP) database to examine whether different treatments of missing data can influence the results of spine studies. QUESTIONS/PURPOSES: (1) What is the frequency of missing data fields for demographics, medical comorbidities, preoperative laboratory values, operating room times, and length of stay recorded in ACS-NSQIP? (2) Using three common approaches to handling missing data, how frequently do those approaches agree in terms of finding particular variables to be associated with adverse events? (3) Do different approaches to handling missing data influence the outcomes and effect sizes of an analysis testing for an association with these variables with occurrence of adverse events? METHODS: Patients who underwent spine surgery between 2005 and 2013 were identified from the ACS-NSQIP database. A total of 88,471 patients undergoing spine surgery were identified. The most common procedures were anterior cervical discectomy and fusion, lumbar decompression, and lumbar fusion. Demographics, comorbidities, and perioperative laboratory values were tabulated for each patient, and the percent of missing data was noted for each variable. These variables were tested for an association with "any adverse event" using three separate multivariate regressions that used the most common treatments for missing data. In the first regression, patients with any missing data were excluded. In the second regression, missing data were treated as a negative or "reference" value; for continuous variables, the mean of each variable's reference range was computed and imputed. In the third regression, any variables with > 10% rate of missing data were removed from the regression; among variables with ≤ 10% missing data, individual cases with missing values were excluded. The results of these regressions were compared to determine how the different treatments of missing data could affect the results of spine studies using the ACS-NSQIP database. RESULTS: Of the 88,471 patients, as many as 4441 (5%) had missing elements among demographic data, 69,184 (72%) among comorbidities, 70,892 (80%) among preoperative laboratory values, and 56,551 (64%) among operating room times. Considering the three different treatments of missing data, we found different risk factors for adverse events. Of 44 risk factors found to be associated with adverse events in any analysis, only 15 (34%) of these risk factors were common among the three regressions. The second treatment of missing data (assuming "normal" value) found the most risk factors (40) to be associated with any adverse event, whereas the first treatment (deleting patients with missing data) found the fewest associations at 20. Among the risk factors associated with any adverse event, the 10 with the greatest effect size (odds ratio) by each regression were ranked. Of the 15 variables in the top 10 for any regression, six of these were common among all three lists. CONCLUSIONS: Differing treatments of missing data can influence the results of spine studies using the ACS-NSQIP. The current study highlights the importance of considering how such missing data are handled. CLINICAL RELEVANCE: Until there are better guidelines on the best approaches to handle missing data, investigators should report how missing data were handled to increase the quality and transparency of orthopaedic database research. Readers of large database studies should note whether handling of missing data was addressed and consider potential bias with high rates or unspecified or weak methods for handling missing data.

BMP-2-induced Neuroforaminal Bone Growth in the Setting of a Minimally Invasive Transforaminal Lumbar Interbody Fusion.

Minimally invasive transforaminal lumbar interbody fusion (MIS-TLIF) has become a popular alternative to traditional methods of lumbar decompression and fusion. When compared with the open technique, the minimally invasive approach can result in decreased pain and blood loss as well as a shorter length of hospitalization. However, the narrower working channel through the tubular retractor increases the difficulty of decortication and bone grafting. Therefore, recombinant human bone morphogenetic proteins (rhBMP-2) is often utilized (although this is off-label) to create a more favorable interbody fusion environment. Recently, the use of rhBMP-2 has been associated with excessive bone growth in an MIS-TLIF. If this bone growth compresses the neighboring neural structures, patients may present with either new or recurrent radicular pain. Computed tomographic (CT) imaging can demonstrate heterotopic bone growth extending from the disk space into either the ipsilateral neuroforamen or lateral recess, which may result in the compression of the exiting or traversing root, respectively. The purpose of this article and the accompanying video is to demonstrate a technique for defining and resecting rhBMP-2-induced heterotopic bone growth following a previous MIS-TLIF.

Minimally Invasive Transforaminal Lumbar Interbody Fusion.

Minimally invasive transforaminal lumbar interbody fusion (MIS TLIF) is performed via tubular dilators thereby preserving the integrity of the paraspinal musculature. The decreased soft tissue disruption in the MIS technique has been associated with significantly decreased blood loss, shorter length of hospitalization, and an expedited return to work while maintaining comparable arthrodesis rates when compared with the open technique particularly in the setting of spondylolisthesis (isthmic and degenerative), recurrent symptomatic disk herniation, spinal stenosis, pseudoarthrosis, iatrogenic instability, and spinal trauma. The purpose of this article and the accompanying video wass to demonstrate the techniques for a primary, single-level MIS TLIF.

Minimally Invasive Posterior Cervical Foraminotomy.

The minimally invasive posterior cervical foraminotomy procedure has become a common and successful procedure for the treatment of cervical radiculopathy. Specifically, the minimally invasive approach allows for decreased postoperative pain, blood loss, and length of hospitalization by preserving the surrounding soft tissue as compared with the traditional open approach. This article and accompanying video demonstrates the technique for a primary, single-level minimally invasive posterior cervical foraminotomy as performed through a tubular retractor.

Development of an MgO-based binder for stabilizing fine sediments and storing CO2.

An MgO-based binder was developed that could stabilize fine dredged sediments for reuse and store CO2. Initially, a binder consisting of fly ash (FA) and blast furnace slag (BFS) was developed by using alkaline activators such as KOH, NaOH, and lime. The FA0.4-BFS0.6 binder (mixed at a FA-to-BFS weight ratio of 4:6) showed the highest compressive strength of 10.7 MPa among FA/BFS binders when 5 M KOH was used. When lime (L) was tested as an alkaline activator, the strength was comparable with those obtained when KOH or NaOH was used. The L0.1-(FA0.4BFS0.6)0.9 binder (10 % lime mixed with the FA/BFS binder) showed the highest strength of 11.0 MPa. Finally, by amending this L0.1-(FA0.4BFS0.6)0.9 binder with MgO, a novel MgO-based binder (MgO0.5-(L0.1-(FA0.4BFS0.6)0.9) 0.5) was developed, which demonstrated the 28th day strength of 11.9 MPa. The MgO-based binder was successfully applied to stabilize a fine sediment to yield a compressive strength of 4.78 MPa in 365 days, which was higher than that obtained by the Portland cement (PC) system (3.22 MPa). Carbon dioxide sequestration was evidenced by three observations: (1) the decrease in pH of the treated sediment from 12.2 to 11.0; (2) the progress of the carbonation front inward the treated sediment; and (3) the presence of magnesium carbonates. The thermogravimetric analysis (TGA) results showed that 67.2 kg of CO2 per ton of the treated sediment could be stored under the atmospheric condition during 1 year.

Impact of Age on the Occurrence of Vascular Complications in Patients Undergoing Anterior Lumbar Approach Surgery.

STUDY DESIGN: Retrospective cohort study. OBJECTIVE: To investigate the impact of age on the incidence of vascular complications in patients undergoing anterior lumbar approach surgery. BACKGROUND: Anterior approach lumbar spinal surgery may facilitate the use of intervertebral devices with larger endplate coverage and increased lordosis. Despite the advantages of this approach, risks related to vascular injury in older patients have been described in the literature. PATIENTS AND METHODS: In total, 751 consecutive patients with degenerative spinal pathology who underwent stand-alone anterior lumbar interbody fusion (ALIF), ALIF combined with posterior fusion and/or instrumentation (360), total disc replacement, or hybrid procedures (ALIF and total disc replacement) were included. Data collected included general patient descriptive data, surgery details, intraoperative vascular injury, and postoperative vascular complications (deep vein thrombosis and/or pulmonary embolism). Rates of vascular complications were compared across age groups. In addition, the mean age of patients was compared between those with versus without vascular complications. RESULTS: Overall mean age was 50.4 years (range: 20-83 yr). The mean estimated blood loss was 91.3 mL (range: 10-2800 mL). A total of 15 patients, 2.0%, had vascular complications. There were 10 cases (1.3%) of intraoperative injury to iliac arteries or iliolumbar veins (mean blood loss was 721 mL, and all were repaired intraoperatively). Postoperatively, 6 patients (0.8%) developed deep vein thrombosis and/or pulmonary embolism (one patient had both). With respect to age, there were no significant differences in rates of intraoperative, postoperative, or combined vascular complication rates across the age group ( P > 0.38). In addition, there were no statistically significant differences in the mean ages of patients with versus those without vascular complications ( P > 0.17). CONCLUSION: Overall incidence of vascular complications was 2.0%. No relationship between vascular complications and age was demonstrated. These data suggest that increased age may not necessarily be an absolute contraindication for anterior lumbar approach surgery. LEVEL OF EVIDENCE: Level III.

The Effect of High-Normal Preoperative International Normalized Ratios on Outcomes and Complications After Anterior Cervical Spine Surgery.

Hematoma after anterior cervical spine surgery can result in neurologic and airway compromise. Current guidelines recommend an international normalized ratio (INR) <1.5 before elective spine surgery because of increased complications. The risk associated with an INR of 1.25 is not well studied. The purpose of this study was to determine the risk of complications associated with a preoperative INR >1.25 and ≤1.5 in patients undergoing elective anterior cervical spine surgery. The American College of Surgeons National Surgical Quality Improvement Program database was queried. Patients undergoing elective anterior cervical spine surgery from 2012 to 2016 who had an INR recorded within 24 hours of surgery were included. Outcomes of interest included postoperative hematoma requiring surgery, 30-day mortality, and 30-day readmissions and reoperations. A total of 2949 patients were included. The incidence of a postoperative hematoma that required surgical management was 0.2%, 0.6%, and 4.5% in the INR≤1, 11.25 and ≤1.5 before elective anterior cervical spine surgery is associated with significantly higher rates of postoperative hematoma formation as well as 30-day readmission and reoperation; there was a trend toward significance in mortality rate. [Orthopedics. 2024;47(1):e26-e32.].

The effect of high-normal preoperative international normalized ratios on postoperative outcomes and complications following posterior cervical spine surgery.

INTRODUCTION: Current guidelines recommend that the International Normalized Ratio (INR) be less than 1.5 prior to spine intervention. Recent studies have shown that an INR > 1.25 is associated worse outcomes following anterior cervical surgery. We sought to determine the risk of complications associated with an INR > 1.25 following elective posterior cervical surgery. METHODS: The American College of Surgeons National Surgical Quality Improvement Program database was queried. Patients undergoing elective posterior cervical surgery from 2012 to 2016 with an INR level within 24 h of surgery were included. Primary outcomes were hematoma requiring surgery, 30-day mortality, and transfusions within 72-hours. There were 815 patients in the INR ≤ 1 cohort (Cohort A), 410 patients in the 1 < INR ≤ 1.25 cohort (Cohort B), and 33 patients in the 1.25 < INR ≤ 1.5 cohort (Cohort C). RESULTS: Cohort C had a higher rate of transfusion (4% Cohort A; 6% Cohort B; 12% Cohort C; p = 0.028) and the rate of mortality within 30 days postoperatively trended toward significance (0.4% Cohort A; 0.5% Cohort B; 3% Cohort C; p = 0.094). There was no significant difference in the rate of postoperative hematoma formation requiring surgery (0.2% Cohort A; 0% Cohort B; 0% Cohort C; p = 0.58). On multivariate analysis, increasing INR was not associated with an increased risk of developing a major complication. CONCLUSION: An INR > 1.25 but ≤ 1.5 may be safe for posterior cervical surgery. An INR > 1.25 but ≤ 1.5 was associated with a significantly higher rate of transfusions. However, increasing INR was not significantly associated with increased risk of any of the major complications.

Integrative multi-omics analysis reveals ortho-topolin riboside exhibits anticancer activity by regulating metabolic pathways in radio-resistant triple negative breast cancer cells.

Radio-resistant triple negative breast cancer (TNBC) is resistant to conventional drugs and radiation therapy. ortho-topolin riboside (oTR) has been evaluated for its anticancer activity in several types of cancer cells. However, its anti-proliferative activity in radio-resistant TNBC cells has not yet been reported. Therefore, we investigated the anti-proliferative activity of oTR in radio-resistant TNBC cells, and performed metabolome, lipidome, transcriptome, and proteome profiling to reveal the mechanisms of the anticancer activity of oTR. oTR showed cytotoxicity against radio-resistant TNBC cells with an inhibitory concentration (IC50) value of 7.78 µM. Significantly decreased (p value < 0.05) basal and compensatory glycolysis were observed in the oTR-treated group than untreated group. Mitochondrial spare respiratory capacity, which is relevant to cell fitness and flexibility, was significantly decreased (p value < 0.05) in the oTR-treated group. The major metabolic pathways significantly altered by oTR according to metabolome, transcriptome, and proteome profiles were the glycerolipid/glycerophospholipid pathway (log2(FC) of MGLL = -0.13, log2(FC) of acylglycerol lipase = -1.35, log2(FC) of glycerol = -0.81), glycolysis (log2(FC) of EGLN1 = 0.16, log2(FC) of EGLN1 = 0.62, log2(FC) of glucose = -0.76, log2(FC) of lactate = -0.81), and kynurenine pathway (log2(FC) of KYNU = 0.29, log2(FC) of kynureninase = 0.55, log2(FC) of alanine = 0.72). Additionally, proline metabolism (log2(FC) of PYCR1 = -0.17, log2(FC) of proline = -0.73) was significantly altered in the metabolomic and transcriptomic profiles. The MAPK signaling pathway (log2(FC) of CCN1 = -0.15, log2(FC) of CCN family member 1 = -1.02) and Rap 1 signaling pathway (log2(FC) of PARD6B = -0.28, log2(FC) of PAR6B = -3.13) were also significantly altered in transcriptomic and proteomic profiles. The findings of this study revealed that oTR has anticancer activity in radio-resistant TNBC cells by affecting various metabolic pathways, suggesting the potential of oTR as a novel anticancer agent for radio-resistant TNBC patients.

Functional Thermoplastic Polyurethane Elastomers with α, ω-Hydroxyl End-Functionalized Polyacrylates.

Thermoplastic polyurethane (TPU) is an essential class of materials for demanding applications, from soft robotics and electronics to medical devices and batteries. However, traditional TPU development is primarily relied on specific soft segments, such as polyether, polyester, and polycarbonate polyols. Here, a novel method is introduced for developing TPU elastomers with enhanced performance and superior functionalities compared to conventional TPUs, achieved through the use of α,ω-hydroxyl end-functionalized polyacrylates. This approach involves a defect-free synthesis of α,ω-hydroxyl end-functionalized polyacrylates through visible-light-driven photoiniferter polymerization. By strategically blending these functionalized polyacrylates with conventional polyols, TPUs that exhibit exceptional toughness and notable self-healing capabilities, traits rarely found in existing TPUs are engineered. Furthermore, incorporating photo-crosslinkable acrylic monomers has enabled the creation of the first TPU with superior elastomeric properties and photopatterning capabilities. This approach paves the way for a new direction in polyurethane engineering, introducing a novel class of soft segments and unlocking the potential for a wide range of advanced applications.

Improvement of the anthropogenic emission rate estimate in Ulaanbaatar, Mongolia, for 2020-21 winter.

Ulaanbaatar (UB), the fast-growing capital of Mongolia, is known for its world's worst level of particulate matter (PM) concentrations in winter. However, current anthropogenic emission inventories over the UB are based on data from more than fifteen years ago, and satellite observations are scarce because UB is in high latitudes. During the winter of 2020-21, the first period of the Fine Particle Research Initiative in East Asia considering the National Differences (FRIEND), several times higher concentrations of PM in UB compared to other urban sites in East Asia were observed but not reproduced with a chemical transport model mainly due to the underestimated anthropogenic emissions. Therefore, we devised a method for sequentially adjusting emissions based on the reactivity of PM precursors using ground observations. We scaled emission rates for the inert species (CO, elemental carbon (EC), and organic carbon (OC)) to reproduce their observed ambient concentrations, followed by SO2 to reproduce the concentration of SO42-, which was examined to have the least uncertainty based on the abundance of observed NH3, and finally NO and NH3 for NO3-, and NH4+. This improved estimation is compared to regional inventories for Asia and suggests more than an order of magnitude increase in anthropogenic emissions in UB. Using the improved emission inventory, we were able to successfully reproduce independent observation data on PM2.5 concentrations in UB in December 2021 from the U.S. Embassy. During the campaign period, we found more than 50% of the SO42-, NO3-, and NH4+ increased in UB due to the improvement could travel to Beijing, China (BJ), and about 20% of the SO42- could travel to Noto, Japan (NT), more than 3000 km away. Also, the anthropogenic emissions in UB can effectively increase OC, NO3-, and NH4+ concentrations in BJ when Gobi dust storms occur.

Effects of volatile organic compounds and new particle formation on real-time hygroscopicity of PM2.5 particles in Seosan, Republic of Korea.

The hygroscopicity of PM2.5 particles plays an important role in PM2.5 haze in Northeast Asian countries by influencing particle growth and chemical composition. New particle formation (NPF) and atmospheric volatile organic compounds (VOCs) are factors that influence particle hygroscopicity. However, the lack of real-time hygroscopicity measurements has deterred the understanding of their effects on particle hygroscopicity. In this study, two intensive monitoring campaigns were conducted during the summer of 2021 and spring of 2022 using real-time aerosol instruments, including a humidified tandem differential mobility analyzer (HTDMA), in Seosan, Republic of Korea. The hygroscopicity parameter κ was calculated from the real-time HTDMA measurement data (κGf). The diurnal variations in κGf exhibited strong inverse linear correlations with the total concentration of VOCs (CTVOC) during the two campaigns. The higher atmospheric CTVOC in summer increased the growth rate of the particle diameter from 10 to 40 nm (6 nm/h) compared with that in spring (2.7 nm/h), resulting in a faster change in κGf for 40-nm particles in summer than in spring because of the increase in organic matter in the chemical compositions of particles. In addition, NPF events introduced additional tiny fresh particles into the atmosphere, which reduced the κGf of 40-nm particles and increased the intensity of the less hygroscopic peaks (κGf < 0.1) of κ-probability density functions (κ-PDF) in NPF days. However, 100-nm particles exhibited fewer changes in κGf than 40-nm particles, resulting in additional dominant hygroscopic peaks (κ âˆ¼ 0.2) of κ-PDFs in both NPF and non-NPF days. When κGf values measured in Seosan were compared with those in other Northeast Asian countries in the literature, the κ values for 40-nm particles were lower than those (κ > 0.2) measured in Beijing and Guangzhou, but those for 100-nm particles were close to those measured in the two cities.

YouTube as a source of information on pediatric scoliosis: a reliability and educational quality analysis.

PURPOSE: To assess the reliability and educational quality of YouTube videos related to pediatric scoliosis. METHODS: In December 2020, searches of "pediatric scoliosis", "idiopathic scoliosis", "scoliosis in children", and "curved spine in children" were conducted using YouTube. The first 50 results of each search were analyzed according to upload source and content. The Journal of the American Medical Association (JAMA) Benchmark Criteria were used to assess reliability (score 0-4), and educational quality was evaluated using the Global Quality Score (GQS; score 0-5) and Pediatric Scoliosis-Specific Score (PSS; score 0-15). Differences in scores based on upload source and content were determined by Analysis of Variance (ANOVA) or Kruskal-Wallis tests. Multivariate linear regressions identified any independent predictors of reliability and educational quality. RESULTS: After eliminating duplicates, 153 videos were analyzed. Videos were viewed 28.5 million times in total, averaging 186,160.3 ± 1,012,485.0 views per video. Physicians (54.2%) and medical sources (19.0%) were the most common upload sources, and content was primarily categorized as disease-specific (50.0%) and patient experience (25.5%). Videos uploaded by patients achieved significantly lower JAMA scores (p = 0.004). Conversely, academic or physician-uploaded videos scored higher on PSS (p = 0.003) and demonstrated a trend towards improved GQS (p = 0.051). Multivariate analysis determined longer video duration predicted higher scores on all measures. However, there were no independent associations between upload source or content and assessment scores. CONCLUSION: YouTube contains a large repository of videos concerning pediatric scoliosis; however, the reliability and educational quality of these videos were low. LEVEL OF EVIDENCE: V.

Prediction of Clinical Remission with Adalimumab Therapy in Patients with Ulcerative Colitis by Fourier Transform-Infrared Spectroscopy Coupled with Machine Learning Algorithms.

We aimed to develop prediction models for clinical remission associated with adalimumab treatment in patients with ulcerative colitis (UC) using Fourier transform-infrared (FT-IR) spectroscopy coupled with machine learning (ML) algorithms. This prospective, observational, multicenter study enrolled 62 UC patients and 30 healthy controls. The patients were treated with adalimumab for 56 weeks, and clinical remission was evaluated using the Mayo score. Baseline fecal samples were collected and analyzed using FT-IR spectroscopy. Various data preprocessing methods were applied, and prediction models were established by 10-fold cross-validation using various ML methods. Orthogonal partial least squares-discriminant analysis (OPLS-DA) showed a clear separation of healthy controls and UC patients, applying area normalization and Pareto scaling. OPLS-DA models predicting short- and long-term remission (8 and 56 weeks) yielded area-under-the-curve values of 0.76 and 0.75, respectively. Logistic regression and a nonlinear support vector machine were selected as the best prediction models for short- and long-term remission, respectively (accuracy of 0.99). In external validation, prediction models for short-term (logistic regression) and long-term (decision tree) remission performed well, with accuracy values of 0.73 and 0.82, respectively. This was the first study to develop prediction models for clinical remission associated with adalimumab treatment in UC patients by fecal analysis using FT-IR spectroscopy coupled with ML algorithms. Logistic regression, nonlinear support vector machines, and decision tree were suggested as the optimal prediction models for remission, and these were noninvasive, simple, inexpensive, and fast analyses that could be applied to personalized treatments.

Microendoscopic Decompression for Lumbar Disc Herniations: An Analysis of Short and Long Term Patient Reported Outcome Measures.

INTRODUCTION: Endoscopic spine surgery is increasingly being used, and techniques, platforms, and applications are rapidly evolving. Despite substantial enthusiasm surrounding these techniques, there is a dearth of longer term patient-reported clinical outcomes. Within the United States in particular, there are yet to be reported large cohort studies with a notable follow-up. We sought to characterize the clinical outcomes of patients undergoing microendoscopic decompression (MED) for lumbar disk herniations. METHODS: The records of patients with symptomatic lumbar disk herniations who underwent MED from May 2018 to February 2021 within a single practice were reviewed. Paired outcomes scores were evaluated using Patient-Reported Outcomes Measurement Information System parameters. Basic perioperative data including length of stay, estimated blood loss, mean opioid use, complication rate, and rate of revision were tabulated. Paired sample Student t-tests and paired Wilcoxon sign tests were used to compare normally distributed and nonparametric data, respectively. RESULTS: Thirty-five patients with complete paired patient-reported outcome measures data and a minimum 6-month follow-up were included; 65.7% of the patients were male with a mean age of 47.1 years (SE 1.8). The mean follow-up was 590.6 days (SE 47.7). In total, 34 of the 35 patients (97.1%) were discharged on the day of their procedure. The estimated blood loss was <25 mL for each procedure. The mean opioid use after extubation and before discharge was 10.4 morphine milligram equivalents. At the 2-week follow-up, there were notable improvements in pain metrics and global health components. At the final follow-up, nearly all parameters showed notable improvement that exceeded minimally clinical important difference values. For most parameters, preoperative values outside of the "normal" range were within normal limits on postoperative testing. DISCUSSION: MED resulted in sustained notable improvement in patient-reported outcome measures that exceeded minimally clinical important difference values at the average follow-up approximating 2 years. These findings substantiate the utility of this technique and additional investment in endoscopic spine technology. DATA AVAILABILITY: Not publicly available; available upon request.