Designing a mandibular advancement device with topology optimization for a partially edentulous patient.

STATEMENT OF PROBLEM: Patients with partial tooth loss treated with implant-supported fixed partial dentures (FPDs) have difficulty using conventional mandibular advancement devices (MADs) because of the risk of side effects. Also, which design factors affect biomechanical stability when designing MADs with better stability is unclear. PURPOSE: The purpose of this finite element (FE) analysis study was to analyze the effect of the MAD design on biomechanical behavior and to propose a new design process for improving the stability of MADs. MATERIAL AND METHODS: Each 3D model consisted of the maxillofacial bones, teeth, and implant-supported FPDs located in the left tooth loss area from the first premolar to the second molar and a MAD. Three types of custom-made MADs were considered: a complete-coverage MAD covering natural tooth-like conventional MADs, a shortened MAD excluding the coverage on the implant-supported FPD, and a newly designed MAD without anterior coverage. For the new MAD design, topology optimization was conducted to reduce the stress exerted on the teeth and to improve retention of the MAD. The new MAD design was finished by excluding the coverage of the maxillary and mandibular central incisors based on the results of the topology optimization. A mandibular posterior restorative force for a protrusion amount of 40% was used as the loading condition. The principal stress and pressure of the cancellous bone and periodontal ligaments (PDLs) were identified. RESULTS: Considering the load concentration induced by the complete-coverage MAD, bone resorption risk and root resorption risk were observed at both ends of the mandibular teeth. The shortened MAD resulted in the highest stress concentration and pressure with the worst stability. However, in the case of the complete-coverage MAD, the pressure in the PDLs was reduced to the normal range, and the risk of root resorption was reduced. CONCLUSIONS: For patients with implant-supported FPDs, MAD designs with different extents of coverage had an influence on biomechanical behavior in terms of stress distribution in cancellous bone and PDLs. A MAD design without anterior coverage provided improved stability compared with complete-coverage or shortened designs. The presented method for MAD design, which combined FE analysis and topology optimization, could be effectively applied in the design of such improved MADs.

Characterization of pork patties containing dry radish (Raphanus sativus) leaf and roots.

OBJECTIVE: This study investigated the effects of dry radish leaf and root on the quality of pork patties during refrigeration storage. METHODS: The patties were divided into the following three groups: the control containing 0% dry radish leaf root powder, RL1 containing 0.5% dry radish leaf root powder, and RL2 and RL3 containing 1% and 2% dry radish leaf root powder, respectively. Proximate composition, pH, cooking loss, microbial analysis, lipid oxidation analysis, color, texture profile analysis and sensory test were performed. RESULTS: Moisture, crude protein, and crude ash contents in RL2 and RL3 were significantly higher than those in other groups (p<0.05), whereas crude fat contents in RL2 and RL3 were significantly lower than other groups (p<0.05). Lightness was significantly lower in RL2 and RL3 than in CON (p<0.05). Cooking loss for RL2 and RL3 were significantly lower than those for the other groups (p<0.05). The pH, thiobarbituric acid levels, and total plate counts of RL2 and RL3 were significantly lower than those of CON at days 7 and 14 (p<0.05). Hardness values of RL2 and RL3 were significantly lower than those of CON, whereas chewiness values were higher than those of CON (p<0.05). In addition, the juiciness of RL2 were significantly greater (p<0.05) than those of the other groups. CONCLUSION: Dried radish leaves and roots improved the proximate composition and quality characteristics of pork patties, providing a basis to produce high-quality patties with extended expiration dates. Thus, dried radish leaves and roots are effective ingredients for health or functional foods.

Effects of moderate intensity static magnetic fields on osteoclastic differentiation in mouse bone marrow cells.

Although we recently demonstrated that static magnetic fields (SMFs) of 3, 15, and 50 mT stimulate osteoblastic differentiation, the effects of SMFs on osteoclastogenesis are still poorly understood. This study focused on the suppressive effects of SMFs on receptor activator of nuclear factor κB ligand (RANKL)-induced osteoclastogenesis and bone resorption. Direct SMFs inhibit RANKL-induced multinucleated osteoclast formation, tartrate-resistant acid phosphatase activity, and bone resorption in mouse bone marrow-derived macrophage cells. The conditioned medium from osteoblasts treated with SMFs also resulted in the inhibition of osteoclast differentiation as well as resorption. The RANKL-induced expression of osteoclast-specific transcription factors, such as c-Fos and NFATc1, was remarkably downregulated by SMF at 15 mT. In addition, SMF inhibited RANKL-activated Akt, glycogen synthase kinase 3ß (GSK3ß), extracellular signal-regulated kinase, c-jun N-terminal protein kinase, mitogen-activated protein kinase (MAPK), and nuclear factor-κB (NF-κB) formation. These findings indicate that SMF-mediated attenuation of RANKL-induced Akt, GSK3ß, MAPK, and NF-κB pathways could contribute to the direct and indirect inhibition of osteoclast formation and bone resorption. Therefore, SMFs could be developed as a therapeutic agent against periprosthetic or peri-implant osteolysis. Additionally, these could be used against osteolytic diseases such as osteoporosis and rheumatoid arthritis. Bioelectromagnetics. 39:394-404, 2018. © 2018 Wiley Periodicals, Inc.

Biomechanical effect of mandibular advancement device with different protrusion positions for treatment of obstructive sleep apnoea on tooth and facial bone: A finite element study.

BACKGROUND: The mandibular advancement device (MAD) is widely used for obstructive sleep apnoea (OSA) treatment, and several studies have demonstrated its effectiveness. However, no comprehensive studies have yet examined the biomechanical safety of the MAD. OBJECTIVES: The objective of this study was to analyse the biomechanical effect of different protrusion positions of a MAD on the teeth and facial bones. METHODS: The posterior restorative forces due to the stretched mandibular muscles were measured by pressure sensors attached to the experimental mandibular advancement device for mandibular protrusions of 10-70% of the maximum protrusion of the subject. A detailed three-dimensional biomechanical model of the study subject, constructed from computed tomography scans, was used in finite element analysis, with loading conditions calculated from the measured posterior restorative forces. The outcome measures were the principal stresses on the periodontal ligaments (PDL) and cancellous bone, and the pressure at the PDL surfaces. The measurements were used to analyse the risk of the tooth movement, tooth root resorption, and bone resorption. RESULTS: The lowest and highest restorative forces occurred at 40% and 70% of maximum protrusion, respectively. The highest risk of tooth movement occurred at the mandibular molar teeth. The mandibular second molar teeth had the highest risks of root and bone resorption. CONCLUSIONS: Mandibular advancement at 70% of maximum protrusion induces risks of tooth root resorption and bone resorption. The mandibular second molars were subjected to the highest stresses. Stress on the teeth and facial bones was the lowest at 40% of maximum mandibular advancement.

Effects of static magnetic fields on bone regeneration of implants in the rabbit: micro-CT, histologic, microarray, and real-time PCR analyses.

OBJECTIVES: The aim of this study was to investigate the effects of static magnetic fields (SMFs) on bone regeneration around titanium implants by µCT, histologic analysis, microarrays, and quantitative real-time PCR (qRT-PCR). MATERIALS AND METHODS: Neodymium magnets provided the source of SMFs, the specimens were grade 5 titanium implants, and the animals were twenty-seven adult male New Zealand white rabbits. These implants were divided into six groups according to the presence of a magnet and predetermined healing period (1, 4, and 8 weeks). Each group comprised six specimens for µCT (n = 6) and histologic examination, and three specimens (n = 3) for microarrays and qRT-PCR, yielding a total of 54 specimens. RESULTS: The µCT data showed that SMFs increased bone volume fraction (bone volume/total volume, BV/TV), trabecular number (Tb.N), and trabecular thickness (Tb.Th). Histologic observation indicated that SMFs promoted new bone formation and direct bony contact with implants. Microarray analysis identified 293 genes upregulated (>twofold) in response to SMFs. The upregulated genes included extracellular matrix (ECM)-related genes (COL10A1, COL9A1, and COL12A1) and growth factor (GF)-related genes (CTGF and PDGFD), and the upregulation was confirmed by qRT-PCR. Gene Ontology (GO) and pathway analysis revealed the involvement of the mitogen-activated protein kinase (MAPK), Wnt, and PPAR-gamma signaling pathways in implant healing. CONCLUSIONS: µCT, histology, microarrays, and real-time PCR indicate that SMFs could be an effective approach to improving bone regeneration around dental implants.

Ultrasensitive Detection of α-Fetoprotein by Total Internal Reflection Scattering-Based Super-Resolution Microscopy for Superlocalization of Nano-Immunoplasmonics.

Superlocalization of immunoplasmonic nanotags on antibody-bound gold-nanoislands (GNIs) along the x and y coordinates was determined using total internal reflection scattering-based super-resolution microscopy (TIRS-SRM) at subdiffraction limit resolution. Individual immunoplasmonic nanotags (20 nm silver nanoparticles) and 100 nm GNIs were selectively acquired in the evanescent field layer by wavelength-dependent plasmonic scattering using two illumination lasers (405 and 635 nm, respectively). α-Fetoprotein (AFP), a liver cancer-related model protein, was immobilized as a target molecule on the GNI arrays. The centroid position of a localized immunoplasmonic nanotag on the GNI was resolved at less than 10 nm of spatial resolution by applying 2D Gaussian fitting to its point spread function. This method showed enhanced sensitive quantification with a limit of detection (LOD) of 7.04 zM (1-2 molecules of AFP/GNI), which was 100-5000000000 times lower than detection limits obtained with previous AFP detection methods. Furthermore, the method was also successfully applied to quantify AFP molecules at the single-molecule level in human serum samples. The wavelength-dependent TIRS-SRM method was demonstrated to be an effective tool for superlocalizing individual protein molecules and interactions in nanoscale regions and was a reliable method for the ultrasensitive quantitative detection of disease-related protein molecules as a nanosensor and for diagnosis at the single-molecule level.

Characteristics of stem cells from human exfoliated deciduous teeth (SHED) from intact cryopreserved deciduous teeth.

The aim of this study is to compare the characteristics of stem cells derived from human exfoliated deciduous teeth (SHED) from cryopreserved intact deciduous teeth with those of fresh SHED. In total, 20 exfoliated deciduous teeth were randomly divided into a fresh group (f-SHED; n = 11) and cryopreserved group (c-SHED; n = 9; stored for 1-8 months). Following thawing and separation of the pulp, the SHED cells were cultured, and the characteristics as mesenchymal stem cells were investigated using proliferation assays, cell-cycle analysis, colony-forming unit-fibroblast (CFU-F) assays, and flow cytometry analyses. Furthermore, differentiation into adipogenic and osteogenic lineages was investigated in vitro as well as in vivo via transplantation in mice. We found no significant differences between the two groups in the proliferation analyses, in the expression of mesenchymal stem cell markers, or in the adipogenic and osteogenic differentiation in vitro (p < 0.05). Furthermore, the in vivo transplantation results showed no significant differences in the quantity of bone tissue that formed or in histochemistry performance (p < 0.05). In conclusion, cryopreservation of intact exfoliated deciduous teeth appears to be a useful method for preserving SHED.

Effects of moderate intensity static magnetic fields on human bone marrow-derived mesenchymal stem cells.

This study aimed to explore effects of static magnetic fields (SMFs) of moderate intensity (3-50 mT) as biophysical stimulators of proliferation and osteoblastic differentiation of human bone marrow-derived mesenchymal stem cells (MSCs). MSCs were exposed to SMFs of three intensities: 3, 15, and 50 mT. Proliferation was assessed by cell counting and bromodeoxyuridine incorporation, and differentiation by measuring alkaline phosphatase (ALP) activity, calcium content, mineralized nodule formation, and transcripts of osteogenic markers. Moderate intensity SMFs increased cell proliferation, ALP activity, calcium release, and mineralized nodule formation in a dose- and time-dependent manner, which peaked at 15 mT. In the same manner, they upregulated expression of osteogenic marker genes such as ALP, bone sialoprotein 2 (BSP2), collagen1a1 (COL1a1), osteocalcin (OCN), osteonectin (ON), osteopontin (OPN), osterix (OSX), and runt-related transcription factor 2 (RUNX2) with peak at 15 mT after 14 or 21 days of exposure. Results demonstrate that moderate intensity SMFs promote proliferation and osteoblastic differentiation of MSCs. This effect could help to improve MSC responses during osseointegration between a dental implant and surrounding bone.

Effects of increased low-level diode laser irradiation time on extraction socket healing in rats.

In our previous studies, we confirmed that low-level laser therapy (LLLT) with a 980-nm gallium-aluminum-arsenide diode laser was beneficial for the healing of the alveolar bone in rats with systemic disease. However, many factors can affect the biostimulatory effects of LLLT. Thus, we attempted to investigate the effects of irradiation time on the healing of extraction sockets by evaluating the expressions of genes and proteins related to bone healing. The left and right first maxillary molars of 24 rats were extracted. Rats were randomly divided into four groups in which extraction sockets were irradiated for 0, 1, 2, or 5 min each day for 3 or 7 days. Specimens containing the sockets were examined using quantitative real-time reverse transcription polymerase chain reaction and western blotting. LLLT increased the expressions of all tested genes, Runx2, collagen type 1, osteocalcin, platelet-derived growth factor-B, and vascular endothelial growth factor, in a time-dependent manner. The highest levels of gene expressions were in the 5-min group after 7 days. Five minutes of irradiation caused prominent increases of the expression of all tested proteins after both 3 and 7 days. The expression level of each protein in group 4 was higher by almost twofold compared with group 1 after 7 days. Laser irradiation for 5 min caused the highest expressions of genes and proteins related to bone healing. In conclusion, LLLT had positive effects on the early stages of bone healing of extraction sockets in rats, which were irradiation time-dependent.

Metal-free protodeboronation of electron-rich arene boronic acids and its application to ortho-functionalization of electron-rich arenes using a boronic acid as a blocking group.

The metal-free thermal protodeboronation of various electron-rich arene boronic acids was studied. Several reaction parameters controlling this protodeboronation, such as solvent, temperature, and a proton source, have been investigated. On the basis of these studies, suitable reaction conditions for protodeboronation of several types of electron-rich arene boronic acids were provided. On the basis of this protodeboronation, a new protocol for the synthesis of ortho-functionalized electron-rich arenes from these boronic acids was developed using the boronic acid moiety as a blocking group in the electrophilic aromatic substitution reaction, followed by the removal of the boronic acid moiety via thermal protodeboronation. Mechanistic studies suggested that this protodeboronation might proceed via the complex formation of a boronic acid with a proton source, followed by the carbon-boron bond fission through σ-bond metathesis, to afford the corresponding arene compound and boric acid.

Serendipitous discovery of 2-((phenylsulfonyl)methyl)-thieno[3,2-d]pyrimidine derivatives as novel HIV-1 replication inhibitors.

We identified a novel class of 2-((phenylsulfonyl)methyl)-thieno[3,2-d]pyrimidine compounds as potent HIV-1 replication inhibitors serendipitously during the process of evaluation of triazolothienopyrimidine (TTPM) compounds. Herein, we report synthesis and biological evaluation of 2-((phenylsulfonyl)methyl)-thieno[3,2-d]pyrimidine compounds using a cell-based full replication assay to identify thienopyrimidines 6 and 30, which could be further utilized as viable lead compounds.

Protodeboronation of ortho- and para-phenol boronic acids and application to ortho and meta functionalization of phenols using boronic acids as blocking and directing groups.

The first metal-free thermal protodeboronation of ortho- and para-phenol boronic acids in DMSO was developed. The protodeboronation was successfully applied to the synthesis of ortho- and meta-functionalized phenols using the boronic acid moiety as a blocking group and a directing group, respectively. Mechanistic studies suggested that this protodeboronation proceeds through the coordination of water to the boron atom followed by σ-bond metathesis.

Synthesis and biological evaluation of triazolothienopyrimidine derivatives as novel HIV-1 replication inhibitors.

We identified a novel class of triazolothienopyrimidine (TTPM) compounds as potent HIV-1 replication inhibitors during a high-throughput screening campaign that evaluated more than 200,000 compounds using a cell-based full replication assay. Herein, we report the optimization of the antiviral activity in a cell-based assay system leading to the discovery of aryl-substituted TTPM derivatives (38, 44, and 45), which exhibited significant inhibition of HIV-1 replication with acceptable safety margins. These novel and potent TTPMs could serve as leads for further development.

Reproduction Factor Based Latent Epidemic Model Inference: A Data-Driven Approach Using COVID-19 Datasets.

The mathematical modeling of infectious diseases aims to evaluate the transmissibility of the on-going spread of disease and guide the government's control strategies and interventions. In this paper, we propose a novel transmissibility indicator, reproduction factor, which evaluates the number of secondary infections from a single nonisolated infectious individual. In contrast to classic reproduction numbers, the reproduction factor explicitly considers the fraction of susceptible individuals (who are not immune to disease naturally or through vaccination) and the nonisolated population to evaluate near real-time transmissibility. Thus, it can be an effective indicator when the spread of disease has progressed and control strategies have been implemented. Other merits of the proposed reproduction factor include data-driven inference based on a Markov chain, which enables the inference of latent information, such as the number of nondetected infectious individuals and the number of daily new infections. We performed an extensive simulation using the COVID-19 datasets of Germany, Italy, South Korea, and California (the U.S.) to verify our model. We further compared the results with other transmissibility measures, including reproduction numbers, and the results of state-of-the-art epidemic models. Through the results, we confirmed that the proposed reproduction factor and corresponding inference model explained the COVID-19 datasets.

Classification of Angelica species found in various foods using an LC-QTOF/MS-based metabolomics approach.

In Korea, Angelica gigas is commonly known as Danggui. However, two other species on the market, Angelica acutiloba and Angelica sinensis, are also commonly called Danggui. Since the three Angelica species have different biologically active components, thus, different pharmacological activities, clear discrimination between them is needed to prevent their misuse. A. gigas is used not only as a cut or powdered product but also in processed foods, where it is mixed with other ingredients. To discriminate between the three Angelica species, reference samples were analysed as non-targeted using liquid chromatography-quadrupole time of flight/mass spectrometry (LC-QTOF/MS) and a metabolomics approach in which a discrimination model was established by partial least squares-discriminant analysis (PLS-DA). Then, the Angelica species in the processed foods were identified. First, 32 peaks were selected as marker compounds and a discrimination model was created using PLS-DA, and its validation was confirmed. Classification of the Angelica species was undertaken using the YPredPS value, and it was confirmed that all 21 foods examined contained the appropriate Angelica species indicated on the product packaging. Likewise, it was confirmed that all three Angelica species were accurately classified in the samples to which they were added.

Discovery and characterization of a novel 7-aminopyrazolo[1,5-a]pyrimidine analog as a potent hepatitis C virus inhibitor.

We describe a novel 7-aminopyrazolo[1,5-a]pyrimidine (7-APP) derivative as a potent hepatitis C virus (HCV) inhibitor. A series of 7-APPs was synthesized and evaluated for inhibitory activity against HCV in different cell culture systems. The synthesis and preliminary structure-activity relationship study of 7-APP are reported.

Differences in implant stability associated with various methods of preparation of the implant bed: an in vitro study.

STATEMENT OF PROBLEM: It is difficult to achieve the primary stability necessary for immediate loading in the posterior maxilla because of thin cortical bone, low density trabecular bone, and inadequate bone height due to the presence of the maxillary sinus. PURPOSE: The purpose of this study was to examine the primary stability of dental implants placed by using different methods of preparation for in vitro monocortical and bicortical models of the posterior maxilla. MATERIAL AND METHODS: Sixty screw-shaped implants (4.0 × 10 mm) were inserted into solid rigid polyurethane blocks. The implants were divided into 6 groups (n=10) to test 2 variables: 1) location (monocortical or bicortical block) and 2) preparation method (standard preparation, underpreparation, or the osteotome technique). The insertion and removal torques were measured and resonance frequency analysis (RFA) was performed to determine the primary stability of each implant. Insertion and removal torque data were analyzed by 2-way ANOVA, followed by the post hoc Tukey HSD multiple comparison test. RFA data were analyzed by 2-way and 1-way ANOVAs and the Tukey HSD multiple comparison test (α=.05). The Pearson correlation analysis was also performed to examine correlations among the values. RESULTS: The preparation method had a significant effect on insertion torque, RFA value, and removal torque; however location had a significant effect only on the removal torque (P<.001). There was a significant interaction between location and preparation method for RFA values (P=.045) and a significant difference in standard preparation method according to the location (P=.039); however, there was no significant difference in underpreparation (P=1.00) and osteotome technique (P=1.00). Statistically significant correlations were found between insertion torque and RFA values (r=0.529, P< .001), insertion torque and removal torque values (r=0.517, P< .001), and removal torque and RFA values (r=0.481, P<.001). CONCLUSIONS: Underpreparation and bicortical fixation significantly increased implant stability and the osteotome technique decreased implant stability in synthetic bone models that mimicked the posterior maxillary region. The primary stability values had statistically significant correlations to each other.

Correlation between surface hydrophilicity and osteoblastic differentiation on microgrooved titanium substrata.

Surface microgrooves and acid etching on titanium (Ti) have been proposed to enhance various cell behaviors. In this study, surface hydrophilicity, protein adsorption, and alkaline phosphatase activity of osteoblasts were analyzed and compared between microgrooved Ti, Ti with microgrooves and further acid etching, smooth Ti, and acid-etched smooth Ti. Correlations between the results of each experiment were analyzed using Pearson's correlation analysis, and the influential factor on alkaline phosphatase activity was determined using multiple stepwise regression analysis. Among groups, the Ti substrata with microgrooves and subsequent acid etching showed significantly greater surface hydrophilicity and alkaline phosphatase activity compared with smooth Ti, whereas the Ti substrata with only microgrooves showed the greatest protein adsorption. Multiple stepwise regression analysis determined the surface hydrophilicity of Ti as the influential factor on alkaline phosphatase activity. This study indicates that surface microgrooves and acid etching on Ti substrata enhance surface hydrophilicity, leading to increased alkaline phosphatase activity.

Discrimination of three Angelica herbs using LC-QTOF/MS combined with multivariate analysis.

Angelica gigas, a popular medicinal herb in Korea, is locally called Danggui; this name is similarly used for Angelica acutiloba and Angelica sinensis, which are also sold in the retail market. These three herbs have differing therapeutic effects and should be used according to their prescribed purposes. In some retail markets, though, all three herbs are known by the same common name rather than a scientific name and can therefore be confused with each other. In particular, in the case of powdered products, intentional or unintentional wrong sales activity by the seller may occur. In this study, non-targeted analysis was performed using liquid chromatography quadrupole time-of-flight mass spectrometry to discriminate between the three Angelica herbs, and marker compounds were identified by principal component analysis. Principal component analysis was applied to the whole dataset with the variables being sample name, peak name (m/z with retention time), and ion intensity extracted in advance by peak finding, alignment, and filtering. All three herbs were visually and clearly differentiated in the score plot, and the marker compounds that contributed to their discrimination were found in the loading plot through principal component variable grouping (PCVG). Among the marker compounds, coumarins contributed to the classification of A. gigas, and phthalides contributed to the classification of A. sinensis. The three Angelica herbs were well discriminated from each other. Within the three Angelica species investigated, marker compounds can determine the species of even powdered or extracted samples that cannot be visually identified.

Claustral MeCP2 Regulates Methamphetamine-induced Conditioned Place Preference in Cynomolgus Monkey.

The claustrum, a brain nucleus located between the cortex and the striatum, has recently been highlighted in drug-related reward processing. Methyl CpG-binding protein-2 (MeCP2) is a transcriptional regulator that represses or activates the expression of the target gene and has been known to have an important role in the regulation of drug addiction in the dopaminergic reward system. The claustrum is an important region for regulating reward processing where most neurons receive dopamine input; additionally, in this region, MeCP2 is also abundantly expressed. Therefore, here, we hypothesized that MeCP2 would be involved in drug addiction control in the Claustrum as well and investigated how claustral MeCP2 regulates drug addiction. To better understand the function of human claustral MeCP2, we established a non-human primate model of methamphetamine (METH) - induced conditioned place preference (CPP). After a habituation of two days and conditioning of ten days, the CPP test was conducted for three days. Interestingly, we confirmed that virus-mediated overexpression of MECP2 in the claustrum showed a significant reduction of METH-induced CPP in the three consecutive days during the testing period. Moreover, they showed a decrease in visit scores (frequency for visit) for the METH-paired room compared to the control group although the scores were statistically marginal. Taken together, we suggest that the claustrum is an important brain region associated with drug addiction, in which MeCP2 may function as a mediator in regulating the response to addictive drugs.