Design modifications and evaluation of the silicone artificial finger joints.

BACKGROUND: There are many reasons that could lead to finger joint arthroplasty, and the most familiar reason is osteoarthritis. Silicone finger joint are the most commonly used implants. However, these implants might fracture with time and cause wear which will lead to chronic inflammation and synovitis for the patient and then implant failure. OBJECTIVE: The aim of this study is to improve the design of the silicone finger joint and simulate the different designs using finite element analysis (FEA) simulation. METHOD: Three different designs were drawn and FEA has been used in this study using Solidworks software. The first design is the silicone finger joint design without any modification, the second one is modified design with added ribs to the junction of distal stem and hinge and the third design was added filler material inside the body of the artificial joint. An axial force with 625 N that was applied on the upper part of the distal stem which is nearly represents the maximum value of the grip strength for normal males. RESULTS: The results showed improvement on the design in which the concentrated stress at the junction of the distal stem and hinge of the design was distributed. In addition, the Von Mises stress was stable for the modified design with added ribs and the added filler material designs after 15°. CONCLUSION: The design modification could improve the stress distribution and stability of the artificial finger joint and increase the lifetime expectancy of these implants.

Emerging Development of Auto-Charging Sensors for Respiration Monitoring.

In recent years, the development of biomedical monitoring systems, including respiration monitoring systems, has been accelerated. Wearable and implantable medical devices are becoming increasingly important in the diagnosis and management of disease and illness. Respiration can be monitored using a variety of biosensors and systems. Auto-charged sensors have a number of advantages, including low cost, ease of preparation, design flexibility, and a wide range of applications. It is possible to use the auto-charged sensors to directly convert mechanical energy from the airflow into electricity. The ability to monitor and diagnose one's own health is a major goal of auto-charged sensors and systems. Respiratory disease model output signals have not been thoroughly investigated and clearly understood. As a result, figuring out their exact interrelationship is a difficult and important research question. This review summarized recent developments in auto-charged respiratory sensors and systems in terms of their device principle, output property, detecting index, and so on. Researchers with an interest in auto-charged sensors can use the information presented here to better understand the difficulties and opportunities that lie ahead.

Recent Applications of Electrospun Nanofibrous Scaffold in Tissue Engineering.

Tissue engineering is a relatively new area of research that combines medical, biological, and engineering fundamentals to create tissue-engineered constructs that regenerate, preserve, or slightly increase the functions of tissues. To create mature tissue, the extracellular matrix should be imitated by engineered structures, allow for oxygen and nutrient transmission, and release toxins during tissue repair. Numerous recent studies have been devoted to developing three-dimensional nanostructures for tissue engineering. One of the most effective of these methods is electrospinning. Numerous nanofibrous scaffolds have been constructed over the last few decades for tissue repair and restoration. The current review gives an overview of attempts to construct nanofibrous meshes as tissue-engineered scaffolds for various tissues such as bone, cartilage, cardiovascular, and skin tissues. Also, the current article addresses the recent improvements and difficulties in tissue regeneration using electrospinning.

Advancement of Nanofibrous Mats and Common Useful Drug Delivery Applications.

Electrospinning enables simple and cost-effective production of polymer nanofibers from different polymer materials. Drug delivery systems are capable of achieving maximum drug treatment benefits by significantly reducing adverse complications. Electrospun nanofibers have recently attracted considerable attention owing to their distinctive properties, including flexibility and biocompatibility. The implementation of functional constituents within nanostructure fibers blends is an effective technique for the administration of a variety of drugs in animal research, broadening the nanofiber capability and reliability. The nanofibrous mesh and its various application purposes are discussed in terms of a summary of recent research, emphasizing the ease of streaming and a large number of combinations of this approach, which could lead to a breakthrough in targeted therapy.

Autocharging Techniques for Implantable Medical Applications.

Implantable devices have successfully proven their reliability and efficiency in the medical field due to their immense support in a variety of aspects concerning the monitoring of patients and treatment in many ways. Moreover, they assist the medical field in disease diagnosis and prevention. However, the devices' power sources rely on batteries, and with this reliance, comes certain complications. For example, their depletion may lead to surgical interference or leakage into the human body. Implicit studies have found ways to reduce the battery size or in some cases to eliminate its use entirely; these studies suggest the use of biocompatible harvesters that can support the device consumption by generating power. Harvesting mechanisms can be executed using a variety of biocompatible materials, namely, piezoelectric and triboelectric nanogenerators, biofuel cells, and environmental sources. As with all methods for implementing biocompatible harvesters, some of them are low in terms of power consumption and some are dependent on the device and the place of implantation. In this review, we discuss the application of harvesters into implantable devices and evaluate the different materials and methods and examine how new and improved circuits will help in assisting the generators to sustain the function of medical devices.

A practical technique for measuring human biofluid conductivity using high gain-frequency characteristics.

Currently, the study of ion composition and performance in human biofluids plays an important role in biomedical engineering research and technology. This field may become universal for human diagnostics; it allows early detection of different diseases in humans by measuring changes in ion behaviour in human biofluids. Practical experiments were conducted to analyse the liquid composite electrolyte conductivity in an alternating electric current field. These experiments allow the contribution of separate types of ions to the overall conductivity to be estimated. The method of estimating the concentration of active ions contained in biofluids is also introduced; it illustrates the possibility of performing qualitative and quantitative analysis over a wide range of concentrations and compositions. The authors present a procedure to determine the concentration of active liquid ions based on conductivity gain-frequency characteristic curve tracing. The experimental results validate the practical use of the proposed method. The results of this research are promising, and further investigation is required to further improve the method.