AuPb2I7: A Narrow Bandgap Au3+ Iodide Semiconductor.

The unusual Au3+ ternary halide AuPb2I7 has been isolated from reactions of AuI, PbI2, and I2. AuPb2I7 crystallizes in the triclinic P1̅ space group as micron-scale needles with cell dimensions a = 4.5170(3) Å, b = 7.3847(4) Å, c = 12.2970(7) Å, α = 76.374(4)°, ß = 83.711(4)°, γ = 72.987(3)° at room temperature with ρ = 6.538 g/cm3 and has no structural phase transition down to 100 K. The title compound has a unique three-dimensional structure composed of [Pb2I7]3- pseudolayers extending in [010] bridged by square planar Au3+ at an oblique angle in the [001] direction. The pseudolayers are composed of 1/∞[Pb2I2]2+ chains propagating down [100] linked by square planar I- ions through [010]. AuPb2I7 has a bandgap of 1.17 eV and is stable in air for several days, before degrading to PbI2, Au0, and I2. Density functional theory calculations show that AuPb2I7 is an indirect bandgap semiconductor where the bandgap stems predominantly from Au-I metal-ligand charge transfer.

Recent Progress in Vascular Tissue-Engineered Blood Vessels.

Cardiovascular disease is the number one cause of death in the U.S and results in the loss of approximately one million lives and more than 400 billion U.S. dollars for treatments every year. Recently, tissue engineered blood vessels have been studied and developed as promising replacements for treatment with autologous veins. Here, we summarize the cell sources and methods to make tissue-engineered blood vessels (TEBVs), the recent progress in TEBV related research, and also the recent progress in TEBV related clinical studies.

Bis(1-ethyl-3-methyl-imidazolium) 3,6-diselanyl-idene-1,2,4,5-tetra-selena-3,6-diphospha-cyclo-hexane-3,6-di-selen-olate.

In the title compound, 2C6H11N2 (+)·P2Se8 (2-) or [EMIM]2P2Se8 (EMIM = 1-ethyl-3-methyl-imidazolium), the anions, located about inversion centers between EMIM cations, exhibit a cyclo-hexane-like chair conformation. The cations are found in columns along the a axis, with centroid-centroid distances of 3.8399 (3) and 4.7530 (2) Å. The observed P-Se distances and Se-P-Se angles agree with other salts of this anion.

Ionothermal synthesis of four new nickel thiophosphate anions: [Ni(P2S8)2]2­, [Ni(P3S9)(P2S8)]3­, [Ni(P3S9)2]4­, and [(NiP3S8)4(PS4)]7­.

Four new nickel thiophosphate anions have been isolated as 1-ethyl-3-methylimidazolium (EMIM) salts: [EMIM](2)[Ni(P(2)S(8))(2)] (1), [EMIM](3)[Ni(P(3)S(9))(P(2)S(8))] (2), [EMIM](4)[Ni(P(3)S(9))(2)] (3), and [EMIM](7)[(NiP(3)S(8))(4)(PS(4))] (4). Single crystals of each were prepared by ionothermal reaction of the elements in [EMIM][BF(4)]. 1 can also be obtained from [EMIM][CF(3)SO(3)]. In all four anions, Ni atoms are octahedrally coordinated and P atoms are tetrahedrally coordinated. In the anion found in 1, two tridentate 1,3-P(2)S(8)(2-) ligands are cis to each other. The anion in 2 contains two different tridentate thiophosphate ligands, 1,3-P(2)S(8)(2-) and P(3)S(9)(3-), whereas the anion in 3 consists of two P(3)S(9)(3-) ligands coordinated to the central Ni atom. The anion in 4 is complex, consisting of four NiP(3)S(8)(-) clusters surrounding a central PS(4) tetrahedron; within the NiP(3)S(8)(-) groups, one P atom is directly bound to Ni. The discovery of these four new compounds demonstrates the versatility of ionothermal methods for the synthesis of novel thiophosphates.

ß-V2O5 as Magnesium Intercalation Cathode.

Magnesium batteries have attracted great attention as an alternative to Li-ion batteries but still suffer from limited choice of positive electrode materials. V2O5 exhibits high theoretical capacities, but previous studies have been mostly limited to α-V2O5. Herein, we report on the ß-V2O5 polymorph as a Mg intercalation electrode. The structural changes associated with the Mg2+ (de-) intercalation were analyzed by a combination of several characterization techniques: in situ high resolution X-ray diffraction, scanning transmission electron microscopy, electron energy-loss spectroscopy, and X-ray absorption spectroscopy. The reversible capacity reached 361 mAh g-1, the highest value found at room temperature for V2O5 polymorphs.

Nitric oxide releasing nanomatrix gel treatment inhibits venous intimal hyperplasia and improves vascular remodeling in a rodent arteriovenous fistula.

Vascular access is the lifeline for hemodialysis patients and the single most important component of the hemodialysis procedure. Arteriovenous fistula (AVF) is the preferred vascular access for hemodialysis patients, but nearly 60% of AVFs created fail to successfully mature due to early intimal hyperplasia development and poor outward remodeling. There are currently no therapies available to prevent AVF maturation failure. First, we showed the important regulatory role of nitric oxide (NO) on AVF development by demonstrating that intimal hyperplasia development was reduced in an overexpressed endothelial nitric oxide synthase (NOS3) mouse AVF model. This supported the rationale for the potential application of NO to the AVF. Thus, we developed a self-assembled NO releasing nanomatrix gel and applied it perivascularly at the arteriovenous anastomosis immediately following rat AVF creation to investigate its therapeutic effect on AVF development. We demonstrated that the NO releasing nanomatrix gel inhibited intimal hyperplasia formation (more than 70% reduction), as well as improved vascular outward remodeling (increased vein diameter) and hemodynamic adaptation (lower wall shear stress approaching the preoperative level and less vorticity). Therefore, direct application of the NO releasing nanomatrix gel to the AVF anastomosis immediately following AVF creation may enhance AVF development, thereby providing long-term and durable vascular access for hemodialysis.

Controllable Nonclassical Conductance Switching in Nanoscale Phase-Separated (PbI2 )1- x (BiI3 )x Layered Crystals.

Layered 2D (PbI2 )1- x (BiI3 )x materials exhibit a nonlinear dependence in structural and charge transport properties unanticipated from the combination of PbI2 and BiI3 . Within (PbI2 )1- x (BiI3 )x crystals, phase integration yields deceptive structural features, while phase boundary separation leads to new conductance switching behavior observed as large peaks in current during current-voltage (I-V) measurements (±100 V). Temperature- and time-dependent electrical measurements demonstrate that the behavior is attributed to ionic transport perpendicular to the layers. High-resolution transmission electron microscopy reveals that the structure of (PbI2 )1- x (BiI3 )x is a "brick wall" consisting of two phases, Pb-rich and Bi-rich. These brick-like features are 10s nm a side and it is posited that iodide ion transport at the interfaces of these regions is responsible for the conductance switching action.

Evaluation of Viscoelastic Properties, Blood Coagulation, and Cellular Responses of a Temperature-Sensitive Gel for Hemostatic Application.

Hemorrhagic blood loss from traumatic injury is the leading cause of death in severe accidents and combat injuries. Treating and stopping blood loss in a timely and effective manner is essential for the survival of the patient. Currently, QuikClot and dry fibrin sealant dressing are well-known approaches for hemostatic treatment. However, these dressings have limitations in slowing blood loss such as being brittle, low blood absorption, and a poor sealant of the injury site. Temperature-sensitive gels may have potential as a platform for delivery of coagulation factors to improve hemostasis and wound sealing in the treatment of traumatic injuries. Here, we developed a temperature-sensitive triblock copolymer (poly ethylene oxide (PEO)-poly propylene oxide (PPO)-poly ethylene oxide (PEO)) containing fibrinogen to promote blood coagulation through gel formation at body temperature. This temperature sensitive solution-to-gel (sol-gel) transition does not require cross-linking agents or UV photoinitiation. We determined that 22 wt % (weight percent) copolymers with and without fibrinogen was the maximum concentration for sol-gel transition at body temperature. Rheology results further confirmed this sol-gel transition of 22 wt % copolymers at body temperature. We showed that fibrinogen itself promoted blood coagulation. Additionally, 22 wt % copolymer with fibrinogen successfully demonstrated stable blood coagulation within the gel compared to 22 wt % copolymer without fibrinogen. Twenty-two weight percent copolymers with and without fibrinogen also exhibited excellent biocompatibility based on cell viability, proliferation, and morphology analysis. In addition, treatment of 22 wt % copolymers did not stimulate pro-inflammatory TNF-α production from differentiated human monocytes. Our results suggest that 22 wt % of a temperature-sensitive copolymer gel containing fibrinogen has great potential as a hemostatic agent stimulating coagulation and providing immediate wound coverage for protection through a sol-gel transition at body temperature.

Development of a Shape-Memory Tube to Prevent Vascular Stenosis.

Inserting a graft into vessels with different diameters frequently causes severe damage to the host vessels. Poor flow patency is an unresolved issue in grafts, particularly those with diameters less than 6 mm, because of vessel occlusion caused by disturbed blood flow following fast clotting. Herein, successful patency in the deployment of an ≈2 mm diameter graft into a porcine vessel is reported. A new library of property-tunable shape-memory polymers that prevent vessel damage by expanding the graft diameter circumferentially upon implantation is presented. The polymers undergo seven consecutive cycles of strain energy-preserved shape programming. Moreover, the new graft tube, which features a diffuser shape, minimizes disturbed flow formation and prevents thrombosis because its surface is coated with nitric-oxide-releasing peptides. Improved patency in a porcine vessel for 18 d is demonstrated while occlusive vascular remodeling occurs. These insights will help advance vascular graft design.

Angiogenic and Osteogenic Synergy of Human Mesenchymal Stem Cells and Human Umbilical Vein Endothelial Cells Cocultured on a Nanomatrix.

To date, bone tissue regeneration strategies lack an approach that effectively provides an osteogenic and angiogenic environment conducive to bone growth. In the current study, we evaluated the osteogenic and angiogenic response of human mesenchymal stem cells (hMSCs) and green fluorescent protein-expressing human umbilical vein endothelial cells (GFP-HUVECs) cocultured on a self-assembled, peptide amphiphile nanomatrix functionalized with the cell adhesive ligand RGDS (PA-RGDS). Analysis of alkaline phosphatase activity, von Kossa staining, Alizarin Red quantification, and osteogenic gene expression, indicates a significant synergistic effect between the PA-RGDS nanomatrix and coculture that promoted hMSC osteogenesis. In addition, coculturing on PA-RGDS resulted in enhanced HUVEC network formation and upregulated vascular endothelial growth factor gene and protein expression. Though PA-RGDS and coculturing hMSCs with HUVECs were each previously reported to individually enhance hMSC osteogenesis, this study is the first to demonstrate a synergistic promotion of HUVEC angiogenesis and hMSC osteogenesis by integrating coculturing with the PA-RGDS nanomatrix. We believe that using the combination of hMSC/HUVEC coculture and PA-RGDS substrate is an efficient method for promoting osteogenesis and angiogenesis, which has immense potential as an efficacious, engineered platform for bone tissue regeneration.

Tolerance and pharmacokinetics of a ciprofloxacin-coated sinus stent in a preclinical model.

BACKGROUND: Chronic rhinosinusitis (CRS) is often associated with persistent bacterial infection despite the use of systemic antibiotics. Topically administered antibiotics are an alternative strategy, but require effective local concentrations, prolonged mucosal contact time, minor systemic absorption, and minimal depletion. The objectives of the current study were to analyze the in vitro release rate and in vivo drug delivery tolerance and pharmacokinetics of a ciprofloxacin-coated sinus stent (CSS). METHODS: The CSS (2 mg) was created from biodegradable poly-D/L-lactic acid. After analyzing in vitro release profile, CSSs were placed unilaterally in maxillary sinuses of 16 rabbits via dorsal sinusotomy. Animals were euthanized between 1 and 3 weeks postoperatively. Ciprofloxacin concentrations in the sinus tissue and plasmas were assessed using high-performance liquid chromatography. Radiological and histological evaluations were performed. RESULTS: In the in vitro release profile, an initial burst release was observed over the first 24 hours, followed by sustained release through the 14-day time point. In the rabbit model, ciprofloxacin was continuously released from the stent up to 3 weeks at doses >50 ng/mL. Histologic examination found no evidence of inflammation, epithelial ulceration, or bony reaction upon euthanization of the animals at 21 days. Computed tomography also demonstrated no signs of mucosal edema or opacification in the sinus. CONCLUSION: The CSS was safe in this preclinical model and sustained release was observed in both the in vitro and in vivo analyses. The innovative stent design coated with ciprofloxacin may provide a unique therapeutic strategy for chronic rhinosinusitis (CRS).

Encapsulation of Human Islets Using a Biomimetic Self-Assembled Nanomatrix Gel for Protection against Cellular Inflammatory Responses.

The major concern of pancreatic islet transplantation is that the implanted islets are exposed to the immune system of the recipient. To overcome this challenge, the peptide amphiphile (PA) nanomatrix gel was used for immunoisolation of islets through microencapsulation. The PA can self-assemble to form a nanomatrix gel with an extracellular matrix-mimicking, islet nurturing microenvironment and a semipermeable immune barrier. In this study, the islet protective effect of the PA nanomatrix gel was evaluated by coculture of PA-encapsulated human islets with differentiated U937 cells (human monocyte cell-line) for 3 and 7 days. The coculture of the bare islets with the differentiated U937 cells stimulated proinflammatory cytokine (IL-1ß and TNF-α) secretion and caused islet death after 7 days, which simulated an early inflammatory response environment after islet transplantation. The PA-encapsulated islets, however, did not stimulate proinflammatory cytokine secretion and maintained islet viability up to 7 days. More insulin-producing ß cells were observed when islets were PA-encapsulated than control islets with the differentiated U937 cells for 7 days compared to the bare islets. This result was also confirmed by dithizone staining analysis. Further evaluation of islet functionality was assessed by a glucose-stimulated insulin secretion test. The PA-encapsulated islets showed greater insulin secretion response to glucose stimulation than the bare islets with the differentiated U937 cells after 3 and 7 days. These results demonstrated that islet encapsulation with the PA nanomatrix gel was able to improve islet survival and function in the presence of inflammatory responses, which will increase the success rate of islet engraftment and the efficacy of islet transplantation.

Poly(ɛ-caprolactone)/gelatin composite electrospun scaffolds with porous crater-like structures for tissue engineering.

Electrospinning has been widely used to fabricate scaffolds imitating the structure of natural extracellular matrix (ECM). However, conventional electrospinning produces tightly compacted nanofiber layers with only small superficial pores and a lack of bioactivity, which limit the usefulness of electrospinning in biomedical applications. Thus, a porous poly(ε-caprolactone) (PCL)/gelatin composite electrospun scaffold with crater-like structures was developed. Porous crater-like structures were created on the scaffold by a gas foaming/salt leaching process; this unique fiber structure had more large pore areas and higher porosity than the conventional electrospun fiber network. Various ratios of PCL/gelatin (concentration ratios: 100/0, 75/25, and 50/50) composite electrospun scaffolds with and without crater-like structures were characterized by their microstructures, surface chemistry, degradation, mechanical properties, and ability to facilitate cell growth and infiltration. The combination of PCL and gelatin endowed the scaffold with both structural stability of PCL and bioactivity of gelatin. All ratios of scaffolds with crater-like structures showed fairly similar surface chemistry, degradation rates, and mechanical properties to equivalent scaffolds without crater-like structures; however, craterized scaffolds displayed higher human mesenchymal stem cell (hMSC) proliferation and infiltration throughout the scaffolds after 7-day culture. Therefore, these results demonstrated that PCL/gelatin composite electrospun scaffolds with crater-like structures can provide a structurally and biochemically improved three-dimensional ECM-mimicking microenvironment.

Novel Multifunctional Nanomatrix Reduces Inflammation in Dynamic Conditions in Vitro and Dilates Arteries ex Vivo.

Inflammatory responses play a critical role in tissue-implant interactions, often limiting current implant utility. This is particularly true for cardiovascular devices. Existing stent technology does little to avoid or mitigate inflammation or to influence the vasomotion of the artery after implantation. We have developed a novel endothelium-mimicking nanomatrix composed of peptide amphiphiles that enhances endothelialization while decreasing both smooth muscle cell proliferation and platelet adhesion. Here, we evaluated whether the nanomatrix could prevent inflammatory responses under static and physiological flow conditions. We found that the nanomatrix reduced monocyte adhesion to endothelial cells and expression of monocyte inflammatory genes (TNF-α, MCP-1, IL-1ß, and IL-6). Furthermore, the nitric-oxide releasing nanomatrix dramatically attenuated TNF-α-stimulated inflammatory responses as demonstrated by significantly reduced monocyte adhesion and inflammatory gene expression in both static and physiological flow conditions. These effects were abolished by addition of a nitric oxide scavenger. Finally, the nanomatrix stimulated vasodilation in intact rat mesenteric arterioles after constriction with phenylephrine, demonstrating the bioavailability and bioactivity of the nanomatrix, as well as exhibiting highly desired release kinetics. These results demonstrate the clinical potential of this nanomatrix by both preventing inflammatory responses and promoting vasodilation, critical improvements in stent and cardiovascular device technology.

Progress and challenges of the bioartificial pancreas.

Pancreatic islet transplantation has been validated as a treatment for type 1 diabetes since it maintains consistent and sustained type 1 diabetes reversal. However, one of the major challenges in pancreatic islet transplantation is the body's natural immune response to the implanted islets. Immunosuppressive drug treatment is the most popular immunomodulatory approach for islet graft survival. However, administration of immunosuppressive drugs gives rise to negative side effects, and long-term effects are not clearly understood. A bioartificial pancreas is a therapeutic approach to enable pancreatic islet transplantation without or with minimal immune suppression. The bioartificial pancreas encapsulates the pancreatic islets in a semi-permeable environment which protects islets from the body's immune responses, while allowing the permeation of insulin, oxygen, nutrients, and waste. Many groups have developed various types of the bioartificial pancreas and tested their efficacy in animal models. However, the clinical application of the bioartificial pancreas still requires further investigation. In this review, we discuss several types of bioartificial pancreases and address their advantages and limitations. We also discuss recent advances in bioartificial pancreas applications with microfluidic or micropatterning technology.

A bio-inspired hybrid nanosack for graft vascularization at the omentum.

UNLABELLED: For three-dimensional tissue engineering scaffolds, the major challenges of hydrogels are poor mechanical integrity and difficulty in handling during implantation. In contrast, electrospun scaffolds provide tunable mechanical properties and high porosity; but, are limited in cell encapsulation. To overcome these limitations, we developed a "hybrid nanosack" by combination of a peptide amphiphile (PA) nanomatrix gel and an electrospun poly (ε-caprolactone) (ePCL) nanofiber sheet with porous crater-like structures. This hybrid nanosack design synergistically possessed the characteristics of both approaches. In this study, the hybrid nanosack was applied to enhance local angiogenesis in the omentum, which is required of tissue engineering scaffolds for graft survival. The ePCL sheet with porous crater-like structures improved cell and blood vessel penetration through the hybrid nanosack. The hybrid nanosack also provided multi-stage fibroblast growth factor-2 (FGF-2) release kinetics for stimulating local angiogenesis. The hybrid nanosack was implanted into rat omentum for 14days and vascularization was analyzed by micro-CT and immunohistochemistry; the data clearly demonstrated that both FGF-2 delivery and porous crater-like structures work synergistically to enhance blood vessel formation within the hybrid nanosack. Therefore, the hybrid nanosack will provide a new strategy for engineering scaffolds to achieve graft survival in the omentum by stimulating local vascularization, thus overcoming the limitations of current strategies. STATEMENT OF SIGNIFICANCE: For three-dimensional tissue engineering scaffolds, the major challenges of hydrogels are poor mechanical integrity and difficulty in handling during implantation. In contrast, electrospun scaffolds provide tunable mechanical properties and high porosity; but, are limited in cell encapsulation. To overcome these limitations, we developed a "hybrid nanosack" by combination of a peptide amphiphile (PA) nanomatrix gel and an electrospun poly (ε-caprolactone) (ePCL) nanofiber sheet with porous crater-like structures. This design synergistically possessed the characteristics of both approaches. In this study, the hybrid nanosack was applied to enhance local angiogenesis in the omentum, which is required of tissue engineering scaffolds for graft survival. The hybrid nanosack was implanted into rat omentum for 14days and vascularization was analyzed by micro-CT and immunohistochemistry. We demonstrate that both FGF-2 delivery and porous crater-like structures work synergistically to enhance blood vessel formation within the hybrid nanosack. Therefore, the hybrid nanosack will provide a new strategy for engineering scaffolds to achieve graft survival in the omentum by stimulating local vascularization, thus overcoming the limitations of current strategies.

A Nitric Oxide-Releasing Self-Assembled Peptide Amphiphile Nanomatrix for Improving the Biocompatibility of Microporous Hollow Fibers.

Oxygenators are critical components of extracorporeal circuits used frequently in cardiopulmonary bypass and intensive care, but platelet activation and induction of a complex inflammatory response are usually observed with their use. To improve the biocompatibility of oxygenators, we developed a nitric oxide (NO)-releasing, self-assembled peptide amphiphile nanomatrix. The nanomatrix formed a homogenous coating over the microporous hollow fibers as demonstrated by scanning electron microscopy. We quantitated platelet adhesion to the artificial fibers by measuring absorbance/area of platelets (Abs/A; nm/m2) using acid phosphatase assay. There was a 17-fold decrease in platelet adhesion to the nanomatrix (Abs/A = 0.125) compared with collagen controls (Abs/A = 2.07; p < 0.05) and a 22-fold decrease compared with uncoated fibers (Abs/A = 2.75; p < 0.05). Importantly, the nanomatrix coating did not impede oxygen transfer in water through coated fiber modules (p > 0.05) in a benchtop test circuit at different flow rates as estimated by change in partial pressure of oxygen in relation to water velocity through fibers. These findings demonstrate the feasibility of coating microporous hollow fibers with a NO-releasing self-assembled amphiphile nanomatrix that may improve the biocompatibility of the hollow fibers without affecting their gas exchange capacity.

Evaluation of ciprofloxacin and metronidazole encapsulated biomimetic nanomatrix gel on Enterococcus faecalis and Treponema denticola.

BACKGROUND: A triple antibiotic mixture (ciprofloxacin; CF, metronidazole; MN, and minocycline; MC) has been used for dental root canal medicaments in pulp regeneration therapy. However, tooth discolorations, cervical root fractures, and inadequate pulp-dentin formation have been reported due to the triple antibiotic regimen. Therefore, an antibiotic encapsulated biomimetic nanomatrix gel was developed to minimize the clinical limitations and maximize a natural healing process in root canal infections. In this study, minimal bacterial concentrations (MBC) of the selected antibiotics (CF and MN) were tested in 14 representative endodontic bacterial species. Then MBC of each CF and MN were separately encapsulated within the injectable self-assembled biomimetic nanomatrix gel to evaluate antibacterial level on Enterococcus faecalis and Treponema denticola. RESULTS: Antibiotic concentrations lower than 0.2 µg/mL of CF and MN demonstrated antibacterial activity on the 14 endodontic species. Furthermore, 6 different concentrations of CF and MN separately encapsulated with the injectable self-assembled biomimetic nanomatrix gel demonstrated antibacterial activity on Enterococcus faecalis and Treponema denticola at the lowest tested concentration of 0.0625 µg/mL. CONCLUSIONS: These results suggest that each CF and MN encapsulated within the injectable self-assembled biomimetic nanomatrix gel demonstrated antibacterial effects, which could be effective for the root canal disinfection while eliminating MC. In the long term, the antibiotic encapsulated injectable self-assembled biomimetic nanomatrix gel can provide a multifunctional antibiotic delivery method with potential root regeneration. Further studies are currently underway to evaluate the effects of combined CF and MN encapsulated within the injectable self-assembled biomimetic nanomatrix gel on clinical samples.

Adult stem cells and tissue engineering strategies for salivary gland regeneration: a review.

Saliva is an important compound produced by the salivary glands and performs numerous functions. Hyposalivation (dry mouth syndrome) is a deleterious condition often resulting from radiotherapy for patients with head and neck cancer, Sjogren's Syndrome, or as a side effect of certain medications. Hyposalivation negatively affects speaking, mastication, and swallowing in afflicted patients, greatly reducing their quality of life. Current treatments for this pathology include modifying lifestyle, synthetic saliva supplementation, and the utilization of salivary gland stimulants and sialagogues. However, many of these treatments do not address the underlying issues and others are pervaded by numerous side effects. In order to address the shortcomings related to current treatment modalities, many groups have diverted their attention to utilizing tissue engineering and regenerative medicine approaches. Tissue engineering is defined as the application of life sciences and materials engineering toward the development of tissue substitutes that are capable of mimicking the structure and function of their natural analogues within the body. The general underlying strategy behind the development of tissue engineered organ substitutes is the utilization of a combination of cells, biomaterials, and biochemical cues intended to recreate the natural organ environment. The purpose of this review is to highlight current bioengineering approaches for salivary gland tissue engineering and the adult stem cell sources used for this purpose. Additionally, future considerations in regard to salivary gland tissue engineering strategies are discussed.

Evaluation of the effect of expansion and shear stress on a self-assembled endothelium mimicking nanomatrix coating for drug eluting stents in vitro and in vivo.

Coating stability is increasingly recognized as a concern impacting the long-term effectiveness of drug eluting stents (DES). In particular, unstable coatings have been brought into focus by a recently published report (Denardo et al 2012 J. Am. Med. Assoc. 307 2148-50). Towards the goal of overcoming current challenges of DES performance, we have developed an endothelium mimicking nanomatrix coating composed of peptide amphiphiles that promote endothelialization, but limit smooth muscle cell proliferation and platelet adhesion. Here, we report a novel water evaporation based method to uniformly coat the endothelium mimicking nanomatrix onto stents using a rotational coating technique, thereby eliminating residual chemicals and organic solvents, and allowing easy application to even bioabsorbable stents. Furthermore, the stability of the endothelium mimicking nanomatrix was analyzed after force experienced during expansion and shear stress under simulated physiological conditions. Results demonstrate uniformity and structural integrity of the nanomatrix coating. Preliminary animal studies in a rabbit model showed no flaking or peeling, and limited neointimal formation or restenosis. Therefore, it has the potential to improve the clinical performance of DES by providing multifunctional endothelium mimicking characteristics with structural integrity on stent surfaces.