Programmable heating and quenching for efficient thermochemical synthesis.

Conventional thermochemical syntheses by continuous heating under near-equilibrium conditions face critical challenges in improving the synthesis rate, selectivity, catalyst stability and energy efficiency, owing to the lack of temporal control over the reaction temperature and time, and thus the reaction pathways1-3. As an alternative, we present a non-equilibrium, continuous synthesis technique that uses pulsed heating and quenching (for example, 0.02 s on, 1.08 s off) using a programmable electric current to rapidly switch the reaction between high (for example, up to 2,400 K) and low temperatures. The rapid quenching ensures high selectivity and good catalyst stability, as well as lowers the average temperature to reduce the energy cost. Using CH4 pyrolysis as a model reaction, our programmable heating and quenching technique leads to high selectivity to value-added C2 products (>75% versus <35% by the conventional non-catalytic method and versus <60% by most conventional methods using optimized catalysts). Our technique can be extended to a range of thermochemical reactions, such as NH3 synthesis, for which we achieve a stable and high synthesis rate of about 6,000 µmol gFe-1 h-1 at ambient pressure for >100 h using a non-optimized catalyst. This study establishes a new model towards highly efficient non-equilibrium thermochemical synthesis.

Distribution of the reef manta ray Mobula alfredi and the oceanic manta ray Mobula birostris in the Philippines: a collaborative effort for conservation.

Little is known about manta ray population size, structure and connectivity in the Philippines. In collaboration with dive operators, non-governmental organizations and authorities, sightings of manta rays were collated into a single national database. Using in-water photographs and videos gathered through citizen science and dedicated research efforts, this study compiled sightings between 2004 and 2020, showing 22 separate sites throughout the archipelago with manta rays present. A total of 392 individual reef manta rays (Mobula alfredi) and 107 oceanic manta rays (Mobula birostris) were identified from the collected footage. Four specific sites in the provinces of Masbate and Palawan together hosted 89% of all identified individuals and accounted for 95% of sightings, highlighting these areas are key aggregation sites. This study also reports the movements of M. birostris within the Philippines, based on photo-identification of three individuals moving 150 km between Cebu and Masbate. Despite the growing number of recreational divers in Daanbantayan and San Jacinto, an 80% decline in M. birostris sightings was observed at these sites. To ensure effective future conservation, it is recommended that efforts focus on the identification and protection of manta ray hotspots and migratory corridors, the creation of a sustainable tourism framework and, most important, the implementation of mitigation strategies to reduce fisheries interactions.

Kinetics of Lifetime Changes in Bimetallic Nanocatalysts Revealed by Quick X-ray Absorption Spectroscopy.

Alloyed metal nanocatalysts are of environmental and economic importance in a plethora of chemical technologies. During the catalyst lifetime, supported alloy nanoparticles undergo dynamic changes which are well-recognized but still poorly understood. High-temperature O2 -H2 redox cycling was applied to mimic the lifetime changes in model Pt13 In9 nanocatalysts, while monitoring the induced changes by in situ quick X-ray absorption spectroscopy with one-second resolution. The different reaction steps involved in repeated Pt13 In9 segregation-alloying are identified and kinetically characterized at the single-cycle level. Over longer time scales, sintering phenomena are substantiated and the intraparticle structure is revealed throughout the catalyst lifetime. The in situ time-resolved observation of the dynamic habits of alloyed nanoparticles and their kinetic description can impact catalysis and other fields involving (bi)metallic nanoalloys.

Insights into the Reaction Mechanism of Ethanol Conversion into Hydrocarbons on H-ZSM-5.

Ethanol dehydration to ethene is mechanistically decoupled from the production of higher hydrocarbons due to complete surface coverage by adsorbed ethanol and diethyl ether (DEE). The production of C3+ hydrocarbons was found to be unaffected by water present in the reaction mixture. Three routes for the production of C3+ hydrocarbons are identified: the dimerization of ethene to butene and two routes involving two different types of surface species categorized as aliphatic and aromatic. Evidence for the different types of species involved in the production of higher hydrocarbons is obtained via isotopic labeling, continuous flow and transient experiments complemented by UV/Vis characterization of the catalyst and ab initio microkinetic modeling.

Improved Selectivity and Stability in Methane Dry Reforming by Atomic Layer Deposition on Ni-CeO2-ZrO2/Al2O3 Catalysts.

Ni can be used as a catalyst for dry reforming of methane (DRM), replacing more expensive and less abundant noble metal catalysts (Pt, Pd, and Rh) with little sacrifice in activity. Ni catalysts deactivate quickly under realistic DRM conditions. Rare earth oxides such as CeO2, or as CeO2-ZrO2-Al2O3 (CZA), are supports that improve both the activity and stability of Ni DRM systems due to their redox activity. However, redox-active supports can also enhance the undesired reverse water gas shift (RWGS) reaction, reducing the hydrogen selectivity. In this work, Ni on CZA was coated with an ultrathin Al2O3 overlayer using atomic layer deposition (ALD) to study the effects of the overlayer on catalyst activity, stability, and H2/CO ratio. A low-conversion screening method revealed improved DRM activity and lower coking rate upon the addition of the Al2O3 ALD overcoat, and improvements were subsequently confirmed in a high-conversion reactor at long times onstream. The overcoated samples gave an H2/CO ratio of ∼1 at high conversion, much greater than uncoated catalysts, and no evidence of deactivation. Characterization of used (but still active) catalysts using several techniques suggests that active Ni is in formal oxidation state >0, Ni-Ce-Al is most likely present as a mixed oxide at the surface, and a nominal thickness of 0.5 nm for the Al2O3 overcoat is optimal.

Identifying the Local Atomic Environment of the "Cu3+" State in Alkaline Electrochemical Systems.

CuO-based catalysts are active for the oxygen evolution reaction (OER), although the active form of copper for the OER is still unknown. We combine operando Raman experiments and density functional theory (DFT) electronic structure calculations to determine the form of Cu(O)xOHy present under OER conditions. Raman spectra show a distinct feature related to the active "Cu3+" species, which is only present under highly oxidizing conditions. DFT is used to produce theoretical Raman standards and match the unique Raman feature of copper under OER potentials. This method identifies a range of Cu3+-containing compounds which match the distinct Raman feature. We then integrate experimental electrochemistry to progressively eliminate possible structures and determine the stoichiometry of the active form as CuOOH, which likely takes the form of a surface-adsorbed hydroxide on a CuO surface. Bader charge analysis, site-projected wavefunctions, and density of states analysis show that electron density is removed from O 2p orbitals upon hydroxide adsorption, suggesting that the electronic structure exhibits d9L Cu2+ behavior rather than the local electronic structure of a formal Cu3+.

Surface chemistry dictates stability and oxidation state of supported single metal catalyst atoms.

Single atom catalysts receive considerable attention due to reducing noble metal utilization and potentially eliminating certain side reactions. Yet, the rational design of highly reactive and stable single atom catalysts is hampered by the current lack of fundamental insights at the single atom limit. Here, density functional theory calculations are performed for a prototype reaction, namely CO oxidation, over different single metal atoms supported on alumina. The governing reaction mechanisms and scaling relations are identified using microkinetic modeling and principal component analysis, respectively. A large change in the oxophilicity of the supported single metal atom leads to changes in the rate-determining step and the catalyst resting state. Multi-response surfaces are introduced and built cheaply using a descriptor-based, closed form kinetic model to describe simultaneously the activity, stability, and oxidation state of single metal atom catalysts. A double peaked volcano in activity is observed due to competing rate-determining steps and catalytic cycles. Reaction orders of reactants provide excellent kinetic signatures of the catalyst state. Importantly, the surface chemistry determines the stability, oxidation, and resting state of the catalyst.