RESUMEN
Methods for culturing oxygen-sensitive cells and organisms under anaerobic conditions are vital to biotechnology research. Here, we report a biomaterial-based platform for anaerobic culture that consists of glucose oxidase (GOX) functionalized alginate microparticles (ALG-GOX), which are designed to deplete dissolved [O2 ] through enzymatic activity. ALG-GOX microparticles were synthesized via a water-in-oil emulsion and had a size of 132.0 ± 51.4 µm. Despite having a low storage modulus, the microparticles remained stable under aqueous conditions due to covalent crosslinking through amide bonds. Enzyme activity was tunable based on the loaded GOX concentration, with a maximum activity of 3.6 ± 0.3 units/mg of microparticles being achieved at an initial loading concentration of 5 mg/mL of GOX in alginate precursor solution. High enzyme activity in ALG-GOX microparticles resulted in rapid oxygen depletion, producing a suitable environment for anaerobic culture. Microparticles loaded with both GOX and catalase (ALG-GOX-CAT) to reduce H2 O2 buildup exhibited sustained activity for potential long-term anaerobic culture. ALG-GOX-CAT microparticles were highly effective for the anaerobic culture of Bacteroides thetaiotaomicron, with 10 mg/mL of ALG-GOX-CAT microparticles supporting the same level of growth in an aerobic environment compared to an anaerobic chamber after 16 h (8.70 ± 0.96 and 10.03 ± 1.03 million CFU, respectively; N.S. p = 0.07). These microparticles could be a valuable tool for research and development in biotechnology.
Asunto(s)
Alginatos , Técnicas de Cultivo de Célula , Alginatos/química , Anaerobiosis , Glucosa Oxidasa/químicaRESUMEN
Microporous annealed particle (MAP) hydrogels are a promising class of in situ-forming scaffolds for tissue repair and regeneration. While an expansive toolkit of annealing chemistries has been described, the effects of different annealing chemistries on MAP hydrogel properties and performance have not been studied. In this study, we address this gap through a controlled head-to-head comparison of poly(ethylene glycol) (PEG)-based MAP hydrogels that were annealed using tetrazine-norbornene and thiol-norbornene click chemistry. Characterization of material properties revealed that tetrazine click annealing significantly increases MAP hydrogel shear storage modulus and results in slower in vitro degradation kinetics when microgels with a higher cross-link density are used. However, these effects are muted when the MAP hydrogels are fabricated from microgels with a lower cross-link density. In contrast, in vivo testing in murine critical-sized calvarial defects revealed that these differences in physicochemical properties do not translate to differences in bone volume or calvarial defect healing when growth-factor-loaded MAP hydrogel scaffolds are implanted into mouse calvarial defects. Nonetheless, the impact of tetrazine click annealing could be important in other applications and should be investigated further.
RESUMEN
Progressive stiffening of the extracellular matrix (ECM) is observed in tissue development as well as in pathologies such as cancer, cardiovascular disease, and fibrotic disease. However, methods to recapitulate this phenomenon in vitro face critical limitations. Here, we present a poly(ethylene glycol)-based peptide-functionalized ECM-mimetic hydrogel platform capable of facile, user-controlled dynamic stiffening. This platform leverages supramolecular interactions between inverse-electron demand Diels-Alder tetrazine-norbornene click products (TNCP) to create pendant moieties that undergo non-covalent crosslinking, stiffening a pre-existing network formed via thiol-ene click chemistry over the course of 6 h. Pendant TNCP moieties have a concentration-dependent effect on gel stiffness while still being cytocompatible and permissive of cell-mediated gel degradation. The robustness of this approach as well as its simplicity and ease of translation give it broad potential utility.
Asunto(s)
Hidrogeles , Polietilenglicoles , Materiales Biocompatibles , Química Clic , Matriz ExtracelularRESUMEN
Microporous annealed particle (MAP) hydrogels are an attractive platform for engineering biomaterials with controlled heterogeneity. Here, we introduce a microfluidic method to create physicochemical gradients within poly(ethylene glycol) based MAP hydrogels. By combining microfluidic mixing and droplet generator modules, microgels with varying properties were produced by adjusting the relative flow rates between two precursor solutions and collected layer-by-layer in a syringe. Subsequently, the microgels were injected out of the syringe and then annealed with thiol-ene click chemistry. Fluorescence intensity measurements of constructs annealed in vitro and after mock implantation into a tissue defect showed that a continuous gradient profile was achieved and maintained after injection, indicating utility for in situ hydrogel formation. The effects of physicochemical property gradients on human mesenchymal stem cells (hMSCs) were also studied. Microgel stiffness was studied first, and the hMSCs exhibited increased spreading and proliferation as stiffness increased along the gradient. Microgel degradability was also studied, revealing a critical degradability threshold above which the hMSCs spread robustly and below which they were isolated and exhibited reduced spreading. This method of generating spatial gradients in MAP hydrogels could be further used to gain new insights into cell-material interactions, which could be leveraged for tissue engineering applications. A new droplet microfluidic approach to obtain microporous annealed particle hydrogels with physicochemical gradients is presented. Gradient formation is achieved by precisely controlling the mixing of two precursor solutions, and the gradient can be maintained after injection. This approach can be leveraged to produce new materials for tissue repair and to gain unique insights on cell-material interactions.
RESUMEN
The objective of this study was to evaluate the utility of gelatin-norbornene (GelNB), which is cross-linkable via thiol-ene click chemistry, and the photoinitiator lithium phenyl-2,4,6 trimethylbenzoylphosphinate (LAP) for 3D bioprinting. These materials were compared to two widely used materials, gelatin-methacryloyl (GelMA) and 2-hydroxy-4'-(2-hydroxyethoxy)-2-methylpropiophenone (I2959). Characterization of photocuring kinetics revealed that LAP markedly improved the kinetics compared to I2959, which improved stability and print fidelity. Additionally, GelNB exhibited improved photocuring kinetics, improved stability, and decreased filament spreading compared to GelMA. However, inks containing GelMA yielded at lower stress, were more easily extruded, and produced smoother filaments. NIH 3T3 fibroblasts exhibited high viability in printed constructs, regardless of the gelatin derivative or photoinitiator used. Overall, these results support the selection of LAP over I2959 and suggest that GelNB could be a useful alternative to GelMA, although further work is needed to optimize GelNB extrusion.
Asunto(s)
Bioimpresión/métodos , Gelatina/química , Animales , Materiales Biocompatibles/química , Supervivencia Celular , Reactivos de Enlaces Cruzados/química , Ensayo de Materiales , Ratones , Células 3T3 NIH , Norbornanos/química , Ácidos Fosfínicos/química , Reología , Rayos UltravioletaRESUMEN
The discovery of tetrazine click-induced secondary interactions is reported as a promising new tool for polymeric biomaterial synthesis. This phenomenon is first demonstrated as a tool for poly(ethylene glycol) (PEG) hydrogel assembly via purely non-covalent interactions and is shown to yield robust gels with storage moduli one to two orders of magnitude higher than other non-covalent crosslinking methods. In addition, tetrazine click-induced secondary interactions also enhance the properties of covalently crosslinked hydrogels. A head-to-head comparison of PEG hydrogels crosslinked with tetrazine-norbornene and thiol-norbornene click chemistry reveals an approximately sixfold increase in storage modulus and unprecedented resistance to hydrolytic degradation in tetrazine click-crosslinked gels without substantial differences in gel fraction. Molecular dynamic simulations attribute these differences to the presence of secondary interactions between the tetrazine-norbornene cycloaddition products, which are absent in the thiol-norbornene crosslinked gels.
Asunto(s)
Materiales Biocompatibles , Hidrogeles , Química Clic , Polietilenglicoles , Compuestos de SulfhidriloRESUMEN
Click chemistry is a versatile tool for the synthesis and functionalization of polymeric biomaterials. Here, we describe a versatile new strategy for producing bioactive, protein-functionalized poly(ethylene glycol) (PEG) hydrogel microparticles that is based on sequential thiol-ene and tetrazine click reactions. Briefly, tetra-functional PEG-norbornene macromer and dithiothreitol (SH) cross-linker were combined at a 0.75:1 [SH]:[norbornene] ratio, emulsified in a continuous Dextran phase, and then photopolymerized to form PEG hydrogel microparticles that varied from 8 to 30 µm in diameter, depending on the PEG concentration used. Subsequently, tetrazine-functionalized protein was conjugated to unreacted norbornene groups in the PEG microparticles. Tetrazine-mediated protein tethering to the microparticles was first demonstrated using fluorescein-labeled ovalbumin as a model protein. Subsequently, bioactive protein tethering was demonstrated using alkaline phosphatase (ALP) and glucose oxidase (GOx). Enzyme activity assays demonstrated that both ALP and GOx maintained their bioactivity and imparted tunable bioactivity to the microparticles that depended on the amount of enzyme added. ALP-functionalized microparticles were also observed to initiate calcium phosphate mineralization in vitro when incubated with calcium glycerophosphate. Collectively, these results show that protein-functionalized hydrogel microparticles with tunable bioactive properties can be easily synthesized using sequential click chemistry reactions. This approach has potential for future applications in tissue engineering, drug delivery, and biosensing.
Asunto(s)
Fosfatasa Alcalina/química , Sistemas de Liberación de Medicamentos , Glucosa Oxidasa/química , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Materiales Biocompatibles/síntesis química , Materiales Biocompatibles/química , Materiales Biocompatibles/uso terapéutico , Química Clic , Humanos , Hidrogel de Polietilenoglicol-Dimetacrilato/síntesis química , Hidrogel de Polietilenoglicol-Dimetacrilato/uso terapéutico , Nanopartículas/química , Nanopartículas/uso terapéutico , Polietilenglicoles/síntesis química , Polietilenglicoles/química , PolimerizacionRESUMEN
Granular hydrogels composed of hydrogel microparticles are promising candidates for 3D bioprinting due to their ability to protect encapsulated cells. However, to achieve high print fidelity, hydrogel microparticles need to jam to exhibit shear-thinning characteristics, which is crucial for 3D printing. Unfortunately, this overpacking can significantly impact cell viability, thereby negating the primary advantage of using hydrogel microparticles to shield cells from shear forces. To overcome this challenge, a novel solution: a biphasic, granular colloidal bioink designed to optimize cell viability and printing fidelity is introduced. The biphasic ink consists of cell-laden polyethylene glycol (PEG) hydrogel microparticles embedded in a continuous gelatin methacryloyl (GelMA)-nanosilicate colloidal network. Here, it is demonstrated that this biphasic bioink offers outstanding rheological properties, print fidelity, and structural stability. Furthermore, its utility for engineering complex tissues with multiple cell types and heterogeneous microenvironments is demonstrated, by incorporating ß-islet cells into the PEG microparticles and endothelial cells in the GelMA-nanosilicate colloidal network. Using this approach, it is possible to induce cell patterning, enhance vascularization, and direct cellular function. The proposed biphasic bioink holds significant potential for numerous emerging biomedical applications, including tissue engineering and disease modeling.
RESUMEN
Spinal cord injury (SCI) is a serious condition with limited treatment options. Neural progenitor cell (NPC) transplantation is a promising treatment option, and the identification of novel biomaterial scaffolds that support NPC engraftment and therapeutic activity is a top research priority. The objective of this study is to evaluate in situ assembled poly (ethylene glycol) (PEG)-based granular hydrogels for NPC delivery in a murine model of SCI. Microgel precursors are synthesized by using thiol-norbornene click chemistry to react four-armed PEG-amide-norbornene with enzymatically degradable and cell adhesive peptides. Unreacted norbornene groups are utilized for in situ assembly into scaffolds using a PEG-di-tetrazine linker. The granular hydrogel scaffolds exhibit good biocompatibility and do not adversely affect the inflammatory response after SCI. Moreover, when used to deliver NPCs, the granular hydrogel scaffolds supported NPC engraftment, do not adversely affect the immune response to the NPC grafts, and successfully support graft differentiation toward neuronal or astrocytic lineages as well as axonal extension into the host tissue. Collectively, these data establish PEG-based granular hydrogel scaffolds as a suitable biomaterial platform for NPC delivery and justify further testing, particularly in the context of more severe SCI.
RESUMEN
While poly(ethylene glycol) (PEG) hydrogels are generally regarded as biologically inert blank slates, concerns over PEG immunogenicity are growing, and the implications for tissue engineering are unknown. Here, we investigate these implications by immunizing mice against PEG to stimulate anti-PEG antibody production and evaluating bone defect regeneration after treatment with bone morphogenetic protein-2-loaded PEG hydrogels. Quantitative analysis reveals that PEG sensitization increases bone formation compared to naive controls, whereas histological analysis shows that PEG sensitization induces an abnormally porous bone morphology at the defect site, particularly in males. Furthermore, immune cell recruitment is higher in PEG-sensitized mice administered the PEG-based treatment than their naive counterparts. Interestingly, naive controls that were administered a PEG-based treatment also develop anti-PEG antibodies. Sex differences in bone formation and immune cell recruitment are also apparent. Overall, these findings indicate that anti-PEG immune responses can impact tissue engineering efficacy and highlight the need for further investigation.
Asunto(s)
Materiales Biocompatibles , Ingeniería de Tejidos , Femenino , Masculino , Ratones , Animales , Materiales Biocompatibles/farmacología , Osteogénesis , Regeneración Ósea , Polietilenglicoles/farmacología , Hidrogeles/farmacologíaRESUMEN
The implementation of bio-orthogonal click chemistries is a topic of growing importance in the field of biomaterials, as it is enabling the development of increasingly complex hydrogel materials capable of providing dynamic, cell-instructive microenvironments. Here, we introduce the tetrazine-norbornene inverse electron demand Diels-Alder reaction as a new cross-linking chemistry for the formation of cell laden hydrogels. The fast reaction rate and irreversible nature of this click reaction allowed for hydrogel formation within minutes when a multifunctional PEG-tetrazine macromer was reacted with a dinorbornene peptide. In addition, the cytocompatibility of the polymerization led to high postencapsulation viability of human mesenchymal stem cells, and the specificity of the tetrazine-norbornene reaction was exploited for sequential modification of the network via thiol-ene photochemistry. These advantages, combined with the synthetic accessibility of the tetrazine molecule compared to other bio-orthogonal click reagents, make this cross-linking chemistry an interesting and powerful new tool for the development of cell-instructive hydrogels for tissue engineering applications.
Asunto(s)
Técnicas de Cultivo de Célula , Química Clic/métodos , Hidrogeles/química , Células Madre Mesenquimatosas/metabolismo , Norbornanos/química , Materiales Biocompatibles , Proliferación Celular , Reactivos de Enlaces Cruzados/química , Humanos , Ingeniería de TejidosRESUMEN
Bio-orthogonal tetrazine click reactions have recently attracted significant interest for applications spanning biological imaging, cancer targeting, and biomaterials science. Here, we report a simple and efficient two-step scheme for the synthesis of an asymmetric tetrazine molecule containing a carboxylic acid handle for subsequent macromolecular conjugation. Yields as high as 75% were achieved using as little as 0.005 equivalents of nickel triflate catalyst, which is a significant improvement over previous methodologies.
RESUMEN
Polymer-polymer aqueous two-phase systems (ATPSs) are attractive for microgel synthesis, but given the complexity of phase separation, predicting microgel material properties from ATPS formulations is not trivial. The objective of this study was to determine how the phase diagram of a poly(ethylene glycol) (PEG) and dextran ATPS is related to the material properties of PEG microgel products. PEG-dextran ATPSs were prepared from four-arm 20 kDa PEG-norbornene and 40 kDa dextran in phosphate buffered saline (PBS), and the phase diagram was constructed. PEG microgels were synthesized from five ATPS formulations using an oligopeptide cross-linker and thiol-norbornene photochemistry. Thermogravimetric analysis (TGA) revealed that the polymer concentration of microgel pellets linearly correlates with the average concentration of PEG in the ATPS rather than the separated phase compositions, as determined from the phase diagram. Atomic force microscopy (AFM) and bulk rheology studies demonstrated that the mechanical properties of microgels rely on both the average concentration of PEG in the ATPS and the ATPS volume ratio as determined from the phase diagram. These findings suggest that PEG-dextran ATPSs undergo homogenization upon mixing, which principally determines the material properties of the microgels upon gelation.
RESUMEN
Continuous glucose monitoring (CGM) devices have the potential to lead to better disease management and improved outcomes in patients with diabetes. Chemo-optical glucose sensors offer a promising, accurate, long-term alternative to the current CGMs that require frequent calibration and replacement. Recently, we have proposed glucose sensor designs using phosphorescence lifetime-based measurement of chemo-optical glucose sensing microdomains embedded within alginate hydrogels. Due to the poor long-term stability of calcium-crosslinked alginate, we propose poly(ethylene glycol) (PEG) hydrogels synthesized via thiol-Michael addition chemistry as an alternative hydrogel carrier. The objective of this study was to evaluate the suitability of Michael addition crosslinked PEG hydrogels compared to calcium crosslinked alginate hydrogels for encapsulating glucose-sensing microdomains. PEG hydrogels crosslinked via thiol-vinyl sulfone addition achieved gelation in under 5 minutes, resulting in an even distribution of sensing microdomains. The shear storage modulus of the PEG hydrogels was tunable from 2.2 ± 0.1 kPa to 9.5 ± 1.8 kPa, which was comparable to the alginate hydrogels (10.5 ± 0.8 kPa), and the inclusion of microdomains did not significantly impact stiffness. The high water content of PEG hydrogels resulted in high glucose permeability that closely corresponded to the glucose permeability of alginate (D = 0.09 and 0.12 cm2 s-1, respectively; p = 0.47), but the PEG hydrogels exhibited superior stability. Both PEG and alginate-embedded sensors exhibited a sensing range up to â¼200 mg dL-1 glucose. The lower limits of detection (LOD) for PEG and alginate-based glucose sensors were 19.8 and 20.6 mg dL-1 with a difference of just 4.2% variation. The small difference between PEG and alginate embedded sensors indicates that their sensing properties are primarily determined by the glucose sensing microdomains rather than the hydrogel matrix. Overall, the results of this study indicate that Michael addition-crosslinked PEG hydrogels are a promising platform for encapsulation of chemo-optical glucose sensing microdomains.
Asunto(s)
Técnicas Biosensibles , Glucosa , Humanos , Calcio , Automonitorización de la Glucosa Sanguínea , Glucemia , Materiales Biocompatibles/química , Compuestos de Sulfhidrilo , Hidrogeles/química , Polietilenglicoles/química , Alginatos/químicaRESUMEN
Currently there are no compendial assays for testing drug release from rectal suppositories. It is therefore essential to study different in vitro release testing (IVRT) and in vitro permeation testing (IVPT) methods for identifying a suitable technique to compare in vitro drug release and to predict in vivo performance of rectal suppositories. In the present study, three different rectal suppository formulations of mesalamine (CANASA, Generic, and In-house) were studied for in vitro bioequivalence. All the different suppository products were characterized by performing weight variation, content uniformity, hardness, melting time, and pH tests. Viscoelastic behavior of the suppositories was also tested both in presence and absence of mucin. Four different IVRT techniques such as Dialysis, Horizontal Ussing Chamber, Vertical Franz cell, and USP apparatus 4. IVPT studies were performed using Horizontal Ussing chamber and Vertical Franz cell methods. Q1/Q2 equivalent products (CANASA, Generic) and a half-strength product were studied to understand the reproducibility, bio relevance, and discriminatory ability of the IVRT and IVPT methods. This study is the first of its kind where molecular docking studies were performed to determine the potential interactions of drug (mesalamine) with mucin, IVRT studies were conducted with and without the presence of mucin, and porcine rectal mucosa was used to perform IVPT tests. The USP 4 method and Horizontal Ussing chamber methods were found to be suitable IVRT and IVPT techniques, respectfully, for rectal suppositories. RLD (Reference Listed Drug) and Generic rectal suppositories were found to exhibit similar release rate and permeation profiles obtained from USP 4, and the IVPT studies, respectfully. Wilcoxon Rank Sum/Mann-Whitney rank test, conducted for the IVRT profiles obtained using USP 4 method, proved the sameness of RLD and Generic suppository products.
Asunto(s)
Mesalamina , Mucinas , Animales , Porcinos , Supositorios , Reproducibilidad de los Resultados , Simulación del Acoplamiento MolecularRESUMEN
Granular hydrogels have recently emerged as promising biomaterials for tissue engineering and 3D-printing applications, addressing the limitations of bulk hydrogels while exhibiting desirable properties such as injectability and high porosity. However, their structural stability can be improved with post-injection interparticle cross-linking. In this study, we developed granular hydrogels with interparticle cross-linking through reversible and dynamic covalent bonds. We fragmented photo-cross-linked bulk hydrogels to produce aldehyde or hydrazide-functionalized microgels using chondroitin sulfate. Mixing these microgels facilitated interparticle cross-linking through reversible hydrazone bonds, providing shear-thinning and self-healing properties for injectability and 3D printing. The resulting granular hydrogels displayed high mechanical stability without the need for secondary cross-linking. Furthermore, the porosity and sustained release of growth factors from these hydrogels synergistically enhanced cell recruitment. Our study highlights the potential of reversible interparticle cross-linking for designing injectable and 3D printable therapeutic delivery scaffolds using granular hydrogels. Overall, our study highlights the potential of reversible interparticle cross-linking to improve the structural stability of granular hydrogels, making them an effective biomaterial for use in tissue engineering and 3D-printing applications.
Asunto(s)
Hidrogeles , Microgeles , Hidrogeles/química , Materiales Biocompatibles/química , Ingeniería de Tejidos/métodos , Impresión TridimensionalRESUMEN
Lung tissue biopsies can result in a leakage of blood (hemothorax) and air (pneumothorax) from the biopsy tract, which threatens the patient with a collapsed lung and other complications. We have developed a lung biopsy tract sealant based on a thiol-ene-crosslinked PEG hydrogel and polyurethane shape memory polymer (SMP) foam composite. After insertion into biopsy tracts, the PEG hydrogel component contributes to sealing through water-driven swelling, whereas the SMP foam contributes to sealing via thermal actuation. The gelation kinetics, swelling properties, and rheological properties of various hydrogel formulations were studied to determine the optimal formulation for composite fabrication. Composites were then fabricated via vacuum infiltration of the PEG hydrogel precursors into the SMP foam followed by thermal curing. After drying, the composites were crimped to enable insertion into biopsy tracts. Characterization revealed that the composites exhibited a slight delay in shape recovery compared to control SMP foams. However, the composites were still able to recover their shape in a matter of minutes. Cytocompatibility testing showed that leachable byproducts can be easily removed by washing and washed composites were not cytotoxic to mouse lung fibroblasts (L929s). Benchtop testing demonstrated that the composites can be easily deployed through a cannula, and the working time for deployment after exposure to water was 2 min. Furthermore, testing in an in vitro lung model demonstrated that the composites were able to effectively seal a lung biopsy tract and prevent air leakage. Collectively, these results show that the PEG hydrogel/SMP foam composites have the potential to be used as lung biopsy tract sealants to prevent pneumothorax post-lung biopsy.
Asunto(s)
Neumotórax , Materiales Inteligentes , Animales , Ratones , Hidrogeles , Materiales Biocompatibles , BiopsiaRESUMEN
We describe here light-regulated swelling and degradation features of polymeric nanoparticles that are produced using an inverse microemulsion polymerization method. We demonstrate the phototriggered release characteristics of the nanoparticles by sequestering protein molecules and releasing them using light as a trigger. Furthermore, the intracellular translocation of the nanoparticles, along with its fluorescent protein payload, was achieved using a cell-penetrating peptide-based surface modification. We expect that the noncovalent encapsulation of proteins using nanoparticles and their photo triggered release using an external light would provide opportunities for achieving intracellular release of molecular therapeutics for on-demand requirements.
Asunto(s)
Nanocápsulas/efectos de la radiación , Fotólisis , Albúmina Sérica Bovina/química , Células 3T3 , Acrilatos/química , Animales , Bovinos , Reactivos de Enlaces Cruzados/química , Éteres/química , Fluoresceínas/química , Fluoresceínas/metabolismo , Ratones , Nanocápsulas/química , Tamaño de la Partícula , Polietilenglicoles/química , Polimerizacion , Albúmina Sérica Bovina/metabolismo , SolubilidadRESUMEN
Combination therapies involving small-interfering RNA (siRNA)-mediated gene silencing and small-molecule drugs are of high interest for cancer treatment. Among the current gene delivery carriers, cell-derived extracellular vesicles (EVs) are particularly promising candidates due to their high biocompatibility, low immunogenicity, in vivo stability, and inherent targeting ability. Here, we developed a multifunctional EV platform capable of selective codelivery of siRNA and doxorubicin (DOX) to cancer cells. siRNA was first loaded into engineered lipid-hybridized EVs (eEVs) to serve as a core. Subsequently, DOX was incorporated into a polyelectrolyte shell surrounding eEVs, which was deposited by layer-by-layer (LbL) assembly. This approach resulted in the production of a stable EV-polymer complex (LbL-eEV) with a diameter of 140.2 ± 9.0 nm and zeta potential of +22.1 ± 0.5 mV. Experiments were performed to assess cellular uptake, cytotoxicity, and gene silencing efficacy in lung adenocarcinoma cells (A549), with noncancerous fibroblast cells (CCL-210) used as a control. The results demonstrated that the LbL-eEV complex can traffic through cells and release siRNA in the cytoplasm, while delivered DOX enters nuclei to induce programmed cell death. Moreover, the inherent selectivity of the particles for cancer cells resulted in effective gene silencing and cancer killing efficiency with reduced cytotoxicity to normal cells. Synchronous delivery of siRNA and DOX was also verified by flow cytometry analysis of single cells. In summary, these data provide a proof of concept for engineering EVs to deliver multiple therapeutics and suggest that LbL-eEVs are a promising drug delivery platform for targeting cancer.
Asunto(s)
Doxorrubicina/administración & dosificación , Doxorrubicina/uso terapéutico , Neoplasias Pulmonares/terapia , ARN Interferente Pequeño/administración & dosificación , ARN Interferente Pequeño/uso terapéutico , Células A549 , Antineoplásicos/administración & dosificación , Antineoplásicos/farmacología , Portadores de Fármacos , Sistemas de Liberación de Medicamentos , Vesículas Extracelulares , Humanos , Nanopartículas , Polímeros , Interferencia de ARNRESUMEN
Hydrogel microparticles (HMPs) are an emerging bioink that can allow three-dimensional (3D) printing of most soft biomaterials by improving physical support and maintaining biological functions. However, the mechanisms of HMP jamming within printing nozzles and yielding to flow remain underexplored. Here, we present an in-depth investigation via both experimental and computational methods on the HMP dissipation process during printing as a result of (i) external resistance from the printing apparatus and (ii) internal physicochemical properties of HMPs. In general, a small syringe opening, large or polydisperse size of HMPs, and less deformable HMPs induce high resistance and closer HMP packing, which improves printing fidelity and stability due to increased interparticle adhesion. However, smooth extrusion and preserving viability of encapsulated cells require low resistance during printing, which is associated with less shear stress. These findings can be used to improve printability of HMPs and facilitate their broader use in 3D bioprinting.