Assessment of the dibenzothiophene desulfurization potential of indigenously isolated bacterial consortium IQMJ-5: a different approach to safeguard the environment.

Biodesulfurization is emerging as a valuable technology for the desulfurization of dibenzothiophene (DBT) and its alkylated substitutes, which are otherwise regarded as refractory to other physical and chemical desulfurizing techniques. The inability of the currently identified pure cultures and artificial microbial consortia due to lower desulfurization rate and product inhibition issues has compelled the researcher to look for an alternative solution. Thus, in the present study, an indigenously isolated microbial consortium was employed to tackle the desulfurization issue. Herein, we isolated several kinds of DBT desulfurizing natural microbial consortia from hydrocarbon-contaminated soil samples by conventional enrichment technique. The most effective desulfurizing microbial consortium was sequenced through illumine sequencing technique. Finally, the effect of the products of the desulfurizing pathway (such as 2-hydroxybiphenyl (2-HBP) and sulfate (SO4-2) was evaluated on the growth and desulfurization capability of the isolated consortium. The outcomes of Gibb's assay analysis showed that six isolates followed the "4S" pathway and converted DBT to 2-HBP. Among the isolates, I5 showed maximum growth rate (1.078 g/L dry cell weight) and desulfurization activity (about 77% as indicated by HPLC analysis) and was considered for further in-depth experimentation. The analysis of 16S rRNA by high-throughput sequencing approach of the I5 isolate revealed five types of bacterial phyla including Proteobacteria, Bacteroidetes, Firmicutes, Patescibacteria, and Actinobacteria (in order of abundance). The isolate showed significant tolerance to the inhibitory effect of both 2-HBP and SO4-2 and maintained growth in the presence of even about 1.0 mM initial concentration of both products. This clearly suggests that the isolate can be an efficient candidate for future in-depth desulfurization studies of coal and other fossil fuels.

Synthesis and characterization of nanobiochar from rice husk biochar for the removal of safranin and malachite green from water.

Xenobiotic pollution in environment is a potential risk to marine life, and human health. Nanobiotechnology is an advanced and emerging solution for the removal of environmental pollutants. Adsorption-based technologies are being used to alleviate the global prevalence of xenobiotics like dyes, due to their high efficacy and cost effectiveness. Current study explored the potential of nanobiochar syntehsized via ultrasonication and centrifugation from rice husk for dye removal from water. It involves the synthesis of nanobiochar from rice husk biochar for removal of Safranin, Malachite green, and a mixture of both from aqueous water. Biochar was synthesized through pyrolysis at 600 °C for 2 h. To convert it into nanobiochar, sonication and centrifugation techniques were applied. The yield obtained was 27.5% for biochar and 0.9% for nanobiochar. Nanobiochar analysis through Fourier-Transform Spectrometer (FTIR), X-ray Power Diffraction (XRD) and scanning electron microscopy (SEM) suggested its crystalline nature having minerals rich in silicon, with a cracked and disintegrated carbon structure due to high temperature and processing treatments. Removal of dyes by nanobiochar was evaluated by changing different physical parameters i.e., nanobiochar dose, pH, and temperature. Pseudo-first order model and pseudo-second order model were applied to studying the adsorption kinetics mechanism. Kinetics for adsorption of dyes followed the pseudo-second order model suggesting the removal of dyes by process of chemical sorption. High adsorption was found at a higher concentration of nanobiochar, high temperature, and neutral pH. Maximum elimination percentages of safranin, malachite green, and a mixture of dyes were obtained as 91.7%, 87.5%, and 85% respectively. We conclude that nanobiochar could be a solution for dye removal from aqueous media.

Colorimetric Detection of Organophosphate Pesticides Based on Acetylcholinesterase and Cysteamine Capped Gold Nanoparticles as Nanozyme.

Organophosphates (OPs) are neurotoxic agents also used as pesticides that can permanently block the active site of the acetylcholinesterase (AChE). A robust and sensitive detection system of OPs utilising the enzyme mimic potential of the cysteamine capped gold nanoparticles (C-AuNPs) was developed. The detection assay was performed by stepwise addition of AChE, parathion ethyl (PE)-a candidate OP, acetylcholine chloride (ACh), C-AuNPs, and 3, 3', 5, 5'-tetramethylbenzidine (TMB) in the buffer solution. The whole sensing protocol completes in 30-40 min, including both incubations. The Transmission Electron Microscopy (TEM) results indicated that the NPs are spherical and have an average size of 13.24 nm. The monomers of C-AuNPs exhibited intense catalytic activity (nanozyme) for the oxidization of TMB, revealed by the production of instant blue colour and confirmed by a sharp peak at 652 nm. The proposed biosensor's detection limit and linear ranges were 5.8 ng·mL-1 and 11.6-92.8 ng·mL-1, respectively, for PE. The results strongly advocate that the suggested facile colorimetric biosensor may provide an excellent platform for on-site monitoring of OPs.

Enhanced bioremediation of diesel range hydrocarbons in soil using biochar made from organic wastes.

Hydrocarbon contamination due to anthropogenic activities is a major environmental concern worldwide. The present study focuses on biochar prepared from fruit and vegetable waste and sewage sludge using a thermochemical approach and its application for the enhanced bioremediation (biostimulation and bioaugmentation) of diesel-polluted soil. The biochar was characterized using FTIR (Fourier-transform infrared spectroscopy), elemental analysis, surface area analysis, and pore analysis. Adsorption experiments showed that hydrocarbon degradation was attributed to biological processes rather than adsorption. The study found that various biochar amendments could significantly increase the rate of hydrocarbon biodegradation with removal efficiencies > 70%. Bioaugmentation using cow dung further improved the removal efficiency to 82%. Treatments showing the highest degree of removal efficiency indicated the presence of 27 different bacteria phyla with Proteobacteria and Actinobacteria as the most abundant phyla. The present study concludes that biochar amendments have great potential for enhancing the bioremediation of soils contaminated with diesel range hydrocarbons.

Contributions and Challenges of High Throughput qPCR for Determining Antimicrobial Resistance in the Environment: A Critical Review.

Expansion in whole genome sequencing and subsequent increase in antibiotic resistance targets have paved the way of high throughput qPCR (HT-qPCR) for analyzing hundreds of antimicrobial resistance genes (ARGs) in a single run. A meta-analysis of 51 selected studies is performed to evaluate ARGs abundance trends over the last 7 years. WaferGenTM SmartChip is found to be the most widely used HT-qPCR platform among others for evaluating ARGs. Up till now around 1000 environmental samples (excluding biological replicates) from different parts of the world have been analyzed on HT-qPCR. Calculated detection frequency and normalized ARGs abundance (ARGs/16S rRNA gene) reported in gut microbiome studies have shown a trend of low ARGs as compared to other environmental matrices. Disparities in the HT-qPCR data analysis which are causing difficulties to researchers in precise interpretation of results have been highlighted and a possible way forward for resolving them is also suggested. The potential of other amplification technologies and point of care or field deployable devices for analyzing ARGs have also been discussed in the review. Our review has focused on updated information regarding the role, current status and future perspectives of HT-qPCR in the field of antimicrobial resistance.

Pediatric oropharyngeal candidiasis: A comprehensive study on risk factors and most prevalent species of Candida.

Oropharyngeal candidiasis is caused by opportunistic fungal pathogen candida. Decreased immune level whether in immunocompromised patients or in extreme age groups facilitate the progression of disease in vulnerable individuals. Current study focusses on evaluation of most prevalent species of Candida in pediatric patients and also assesses risk factors causing oropharyngeal candidiasis. Total of 1152 pediatric patients, previously diagnosed with oropharyngeal candidiasis from rural areas of District Bahawalpur were included in this study. Oral clinical swab samples were collected from these patients. From collected clinical swab samples, isolation, characterization and identification of Candida spp. was carried out to assess most prevalent species. Questionnaire was filled, with prior patients consent, for assessment of risk factors associated with oropharyngeal candidiasis. Candida albicans was the most prevalent species with 68.6% prevalence. While C. lusitaniae (a nonalbicans) was the least prevalent with 0.4% prevalence. Among other non-albicans, C. glabrata counted 12.9%, C. tropicalis 5.6%, C. krusei 8.5%, C. parapsilosis 3.1% and C. dublineiensis 1.1%. Associated risk factors included hygienic status of mother, patient's cleanliness and economic condition of the parents. Being disease of infancy, oropharyngeal candidiasis, is the oral infection with many episodes of relapse in pediatric patients and if not addressed properly may lead to severe invasive and noninvasive infections. There is dire need of integrated efforts to reduce the burden of infections in pediatrics specially and common population in general, by adopting various steps including more awareness programs, increasing economic status of the people, patient counselling and many other steps in rural areas.

Isolation and molecular characterization of polyvinyl chloride (PVC) plastic degrading fungal isolates.

The recalcitrant nature of polyvinyl chloride creates serious environmental concerns during manufacturing and waste disposal. The present study was aimed to isolate and screen different soil fungi having potential to biodegrade PVC films. After 10 months of soil burial experiment, it was observed that a number of fungal strains were flourishing on PVC films. On morphological as well as on 18rRNA gene sequence and phylogenetic basis they were identified as Phanerochaete chrysosporium PV1, Lentinus tigrinus PV2, Aspergillus niger PV3, and Aspergillus sydowii PV4. The biodegradation ability of these fungal isolates was further checked in shake flask experiments by taking thin films of PVC (C source) in mineral salt medium. A significant change in color and surface deterioration of PVC films was confirmed through visual observation and Scanning electron microscopy. During shake flask experiments, P. chrysosporium PV1 produced maximum biomass of about 2.57 mg ml(-1) followed by A. niger PV3. P. chrysosporium PV1 showed significant reduction (178,292 Da(-1)) in Molecular weight of the PVC film than control (200,000 Da(-1)) by gel permeation chromatography. Furthermore more Fourier transform infrared spectroscopy and nuclear magnetic resonance also revealed structural changes in the PVC. It was concluded that isolated fungal strains have significant potential for biodegradation of PVC plastics.

Bacterial succession and degradative changes by biofilm on plastic medium for wastewater treatment.

Biofilms contain a diverse range of microorganisms and their varying extracellular polysaccharides. The present study has revealed biofilm succession associated with degradative effects on plastic (polypropylene) and contaminants in sludge. The wet weight of biofilm significantly (p < 0.05) increased; from 0.23 ± 0.01 to 0.44 ± 0.01 g. Similarly, the dry weight of the biofilm increased from 0.02 to 0.05 g. Significant reduction in pathogens (E. coli and feacal coliforms) by MPN technique (>80%) and in chemical parameters (decrease in COD, BOD5 of 73.32 and 69.94%) representing diminution of organic pollutants. Energy dispersive X-ray spectroscopy (EDS) of plastic revealed carbon and oxygen contents, further surface analysis of plastic by scanning electron microscopy (SEM) revealed emergence of profound bacterial growth on the surface. Fourier transform infrared (FTIR) spectroscopy conforms its biotransformation under aerobic conditions after 8 weeks. New peaks developed at the region 1050 and 969 cm(-1) indicating CO and CC bond formation. Thus plastic with 6 weeks old aerobic biofilm (free of pathogens, max. weight, and OD, efficient COD & BOD removal ability) is suggested to be maintained in fixed biofilm reactors for wastewater treatment.

Performance evaluation of gravity-driven bioreactor (GDB) for simultaneous treatment of black liquor and domestic wastewater.

A lab-scale gravity-driven bioreactor (GDB) was designed and constructed to evaluate the simultaneous treatment of black liquor and domestic wastewater. The GDB was operated with a mixture of black liquor and domestic wastewater at a ratio of 1:1 and maintained at an average organic loading rate of 1235 mg-COD/L-Day. The wastewater was fed to the primary sedimentation tank at a flow rate of approximately 12 mL/min and subsequently passed through serially connected anaerobic and aerobic chambers with the same flow rate. Each wastewater sample was allowed to undergo a hydraulic retention time of approximately 72 h, ensuring effective treatment. The GDB was actively operated for nine samples (W1-W9) at a weekly frequency. The entire process was conducted within the workstation's ambient temperature range of 30-35 °C to sustain microbial activity and treatment efficiency in an open environment. The performance of the GDB was evaluated in terms of various pollution indicators, including COD, BOD5, lignin removal, TDS, TSS, EC, PO43-, SO42-, microbial load (CFU/mL and MPN index), total nitrogen, and color reduction. The results showed that the GDB achieved promising treatment efficiencies: 84.5% for COD, 71.80% for BOD5, 82.8% for TDS, 100% for TSS, 74.71% for E.C., 67.25% for PO43-, 81% for SO42-, and 69.36% for TN. Additionally, about 80% reduction in lignin content and 57% color reduction were observed after the treatment. The GDB substantially reduced microbial load in CFU/mL (77.98%) and MPN (90%). This study marks the first to report on wastewater treatment from two different sources (black liquor and domestic wastewater) using a simple GDB design. Furthermore, it highlights the GDB's potential as a cost-effective, environmentally friendly, and efficient solution for wastewater treatment, with no need for supplementary chemical or physical agents and zero operational costs.

Correction: Mansoor et al. Synthesis and Characterization of Titanium Oxide Nanoparticles with a Novel Biogenic Process for Dental Application. Nanomaterials 2022, 12, 1078.

In the original publication [...].

A review on influence of biochar amendment on soil processes and environmental remediation.

Biochar is the thermal degradation product of biomass generated in an oxygen-limited environment under different pyrolysis conditions. Biochar characteristics are functions of the feedstock material and pyrolysis temperature. Depending on pyrolysis conditions biochar concentrates varying quantities of recalcitrant and labile carbon along with nutrients which in turn affect soil physiochemical properties and microbial processes. Biochar in soil balances carbon content encourages nitrogen fixation and solubilize phosphorus along with enhancing soil enzyme activity. It serves as a microhabitat for microorganisms present in soil thus influences the diversity, composition, and distribution of soil microbial communities by affecting their intra- and interspecific communication. This review provides an overview of the current knowledge about biochar characteristics, its interactions with soil, and associated biota and its role in soil remediation. In addition, this paper also discussed the factors affecting the capacity of biochar to adsorb organic pollutants following different mechanisms. Being an effective adsorbent due its high specific surface area, large porosity, and numerous surface functional groups biochar has been explored extensively in field of environment to remediate contaminated soils.

The effect of organics transformation and migration on pore structure of bituminous coal and lignite during biomethane production.

Biomethane generation by coal degradation not only can increase coalbed methane (CBM) reserves, namely, microbially enhanced coalbed methane (MECBM), but also has a significant effect on the pore structure of coal which is the key factor in CBM extraction. The transformation and migration of organics in coal are essential to pore development under the action of microorganisms. Here, the biodegradation of bituminous coal and lignite to produce methane and the cultivation with inhibition of methanogenic activity by 2-bromoethanesulfonate (BES) were performed to analyze the effect of biodegradation on coal pore development by determining the changes of the pore structure and the organics in culture solution and coal. The results showed that the maximum methane productions from bituminous coal and lignite were 117.69 µmol/g and 166.55 µmol/g, respectively. Biodegradation mainly affected the development of micropore whose specific surface area (SSA) and pore volume (PV) decreased while the fractal dimension increased. After biodegradation, various organics were generated which were partly released into culture solution while a large number of them remained in residual coal. The content of newly generated heterocyclic organics and oxygen-containing aromatics in bituminous coal was 11.21% and 20.21%. And the content of heterocyclic organics in bituminous coal was negatively correlated with SSA and PV but positively correlated with the fractal dimension which suggested that the retention of organics contributed greatly to the decrease of pore development. But the retention effect on pore structure was relatively poor in lignite. Besides, microorganisms were observed around fissures in both coal samples after biodegradation which would not be conducive to the porosity of coal on the micron scale. These results revealed that the effect of biodegradation on pore development of coal was governed by the combined action of organics degradation to produce methane and organics retention in coal whose contributions were antagonistic and determined by coal rank and pore aperture. The better development of MECBM needs to enhance organics biodegradation and reduce organics retention in coal.

Contaminants from a former Croatian coal sludge dictate the structure of microbiota in the estuarine (Rasa Bay) sediment and soil.

Introduction: Croatian superhigh-organic-sulfur Rasa coal had been mined for nearly 400 years. The release of hazardous trace elements (HTEs) and toxic organic pollutants (TOPs) into the local environment by coal mining, preparation, and combustion activities has resulted in pollution. Methods: In this study, the diversity and composition of microbial communities in estuarine sediment and soil samples as well as community function responses to the pollutants were investigated. Results: The results showed that PAH degradation does occur following 60 years of natural attenuation, the location is still heavily polluted by polycyclic aromatic hydrocarbons (PAHs) and HTEs. Microbial analyses have shown that high concentrations of PAHs have reduced the diversity and abundance of microbial communities. The pollution exerted an adverse, long-term impact on the microbial community structure and function in the brackish aquatic ecosystem. Microorganisms associated with the degradation of PAHs and sulfur-containing compounds have been enriched although the diversity and abundance of the microbial community have reduced. Fungi which are believed to be the main PAH degrader may play an important role initially, but the activity remains lower thereafter. It is the high concentrations of coal-derived PAHs, rather than HTEs, that have reduced the diversity and abundance of microbial communities and shaped the structure of the local microbiota. Discussion: This study could provide a basis for the monitoring and restoration of ecosystems impacted by coal mining activities considering the expected decommission of a large number of coal plants on a global scale in the coming years due to growing global climate change concerns.

Corrigendum: Contaminants from a former Croatian coal sludge dictate the structure of microbiota in the estuarine (Rasa Bay) sediment and soil.

[This corrects the article DOI: 10.3389/fmicb.2023.1126612.].

Response of mixed bacterial culture towards dibenzothiophene desulfurization under the influence of surfactants and microscopically (SEM and TEM) characterized magnetic Fe3 O4 nanoparticles.

Excessive emission of sulfur dioxides from the combustion of coal and other fossil fuels for thermal and industrial purposes has been associated with serious environmental hazards. Biodesulfisation (BDS) can be an effective approach for reducing the impact of toxic gases to its inbuilt operational feasibility under ambient environmental conditions. In the present research, two strategies for BDS of a standard organosulfur compound such as dibenzothiophene (DBT) were investigated under laboratory conditions. In the first treatment, the role of different surfactants such as Tween-20, Tween-80, SDS, and EDTA on the desulfurization of DBT was investigated by the application of bacterial consortium IQMJ-5. In the second treatment, Iron oxidenanoparticles were synthesized and immobilized on the surface of bacteria cells. Shake flask experiments were conducted with immobilized cells, surfactant amended immobilized cells, and control or noncoated cells. Among different surfactant treatments, Tween-80 was found to be the most effective surfactant, showing maximum desulfurization activity at a concentration of 5 g/L. The transmission electron microscopy and X-ray diffraction analysis indicated that produced nanoparticles were spherical in shape with a size of about 46 nm and had a stoichiometric ratio of 55.85% and 44.15% between O and Fe, respectively. The nanoparticle treatment enhanced the DBT desulfurization process up to 11.37% as compared to the control, specifically when immobilized cells were used. Therefore, it was concluded that nanoparticles treatments with immobilization of the bacterial cells enhanced the desulfurization rate of DBT under ambient reaction conditions and provide a sustainable alternative for commercial coal BDS.

Enhancing Biomethane Production From Lignite by an Anaerobic Polycyclic Aromatic Hydrocarbon Degrading Fungal Flora Enriched From Produced Water.

The coal-degrading ability of microorganisms is essential for the formation of biogenic coalbed methane. The ability to degrade the aromatic compound of coal is more important because it is perceived as the main refractory component for bioconversion. In this paper, a polycyclic aromatic hydrocarbon (PAH) degrading fungal community (PF) was enriched from produced water using phenanthrene as sole carbon source. The goal was to improve both the microbial structure of the methanogenic microflora and its coal-degrading ability. Two strategies were pursued. The first used coal pretreatment with PF (PP), followed by methane production by methanogenic microflora; the second used methane production directly from coal by mixed culture of PF and methanogenic microflora (PM). The results showed that methane productions of PP and PM increased by 29.40 and 39.52%, respectively. After 7 days of cultivation, the fungal community has been altered in PP and PM, especially for Penicillium the proportions of which were 67.37 and 89.81% higher than that in methanogenic microflora, respectively. Furthermore, volatile fatty acid accumulations increased by 64.21 and 58.15%, respectively. The 13C-NMR results showed that PF addition promoted the transformation of aromatic carbons in coal to carboxyl and carbonyl carbons, which contributed greatly to the production of methane together with oxygen-containing functional groups. These results suggest that methane production can be increased by indigenous PAH-degrading fungi by improving the fermentation of aromatics in coal and the generation of volatile fatty acids. This provided a feasible method for enhancing biomethane generation in the coal seam.

Synthesis and Characterization of Titanium Oxide Nanoparticles with a Novel Biogenic Process for Dental Application.

The prevalence of dental caries has been largely consonant over time despite the enhancement in dental technologies. This study aims to produce novel GIC restorative material by incorporating TiO2 nanoparticles synthesized by Bacillus subtilis for the treatment of dental caries. The TiO2 nanoparticles were prepared by inoculating a fresh culture of Bacillus subtilis into a nutrient broth for 24 h, which was then characterized by XRD, DRS, FTIR, AFM, SEM, TEM and EDX. These TiO2 nanoparticles were incorporated in GIC restorative material at different concentrations (0-10% TiO2 -GIC) and were tested for their mechanical properties in a universal testing machine. The XRD analysis revealed synthesis of anatase and rutile-phased TiO2 nanoparticles with a particle size of 70.17 nm that was further confirmed by SEM and TEM analysis. The EDX spectrum indicated prominent peaks of titanium and oxygen with no impurities in the prepared material. Treatment with 5% TiO2 -GIC proved to be most effective for the treatment of dental caries with no observable cytotoxic effect. An increase in the compressive strength of TiO2 nanoparticle-reinforced GIC was observed as the concentration of the TiO2 nanoparticles was increased up to 5%; subsequently, the compressive strength was lowered. An increase in the flexural strength was observed in GIC containing 0%, 3% and 5% TiO2 nanoparticles sequentially. Based on the results, it can be concluded that Bacillus subtilis-derived TiO2 nanoparticles have excellent potential for developing next generation of restorative materials for dental issues.

Optimizing biocatalytic potential of Dipodascus australiensis M-2 for degrading lignin under laboratory conditions.

In present research, a potent fungal strain was isolated from paper mill effluent (black liquor) in order to investigate its potential for the biodegradation of lignin. Two step strategy was used to screen most efficient fungal strain having ability to growin MSM-black liquor medium and to degrade alkali lignin.The results of initial screening indicated that the strain M-2 produced comparatively higher ligninolytic zone on MSN agar plates supplemented with black liquor (BL) and alkali ligninase compared to the other isolates.The results of 18S rRNA gene sequencing revealed that strain M-2 showed ≥ 99% sequence homology with Dipodasceus australiansis.The process for the biodegradation of lignin was optimized using Taguchi Orthogonal Array design. Under optimized conditions of pH 9, 40 °C and 4% inoculum, a maximum of 89% lignin was degraded with 41% color reduction after 8 days of incubation period by Dipodasceus australiansis M-2. The pH and temperature were found to be significant terms with the p-values of 0.002 and 0.001 respectively. The laccase activity of the Dipodascus australiensis was found to be maximum of 1.511 U/mL. The HPLC analysis of lignin biodegradation indicated sharp transformation of peaks as compared to the control. Our results suggested that the strain Dipodascus australiensis M-2 possess excellent lignin degradation and color reduction capability and can be applied in waste treatment systems for pulp and paper mill effluent. In present work we are reporting first hand information regarding biodegradation of lignin by a potent strain of Dipodascus australiensis and statistical optimization of the bioprocess.

Crude oil biodegradation potential of biosurfactant-producing Pseudomonas aeruginosa and Meyerozyma sp.

This study investigates the potential of crude oil degrading capabilities of biosurfactant-producing strains of Pseudomonas aeruginosa MF069166 and Meyerozyma sp. MF138126. P. aeruginosa produced mono-/di-rhamnolipids congeners whereas, Meyerozyma sp. produced acidic and lactonic forms of sophorolipids with crude oil. The values of critical micelle concentrations of rhamnolipids and sophorolipids were 40 mg/L and 50 mg/L with reductions in surface tension of water to 29 mN/m and 33 mN/m. Dynamic light scattering revealed that the average diameter of micellar aggregates of rhamnolipids ranged between 300 and 350 nm and the average size of sophorolipids micelles was 309 nm and 380 nm. Biosurfactants from P. aeruginosa and Meyerozyma sp. exhibited emulsification activities of 87% and 84% in crude oil. Cell surface hydrophobicity of both strains was higher in the presence of hydrophobic contaminants. The biosurfactants showed stability under varying pH, NaCl concentrations and temperatures. Gravimetric and GC-MS analyses demonstrated that P. aeruginosa degraded 91% of the petroleum hydrocarbons while Meyerozyma sp. showed 87% biodegradation efficiency. P. aeruginosa and Meyerozyma sp. have also been found to degrade halogen-containing compounds and showed excellent crude oil degradation efficiency. It is concluded that both strains have high potential of applications in the bioremediation of hydrocarbons-contaminated sites.

Methane Generation from Anthracite by Fungi and Methanogen Mixed Flora Enriched from Produced Water Associated with the Qinshui Basin in China.

Biogenic coalbed methane (CBM) is generally believed to be formed by anaerobic bacteria and methanogens, while a few studies took fungi into account. Here, the microflora consisting of fungi and methanogens was enriched from the produced water associated with the Qinshui Basin using anthracite as the only carbon source. The maximum methane yield of 231 µmol/g coal was obtained after 22 days of cultivation under the optimum temperature of 35 °C, pH of 8, salinity of 0-2%, particle size of 0.075-0.150 mm, and the solid-liquid ratio of 1:30. It could remain active even after exposure to air for 24 h. Miseq results showed that the archaea were mainly composed of Methanocella, a hydrogenotrophic methanogen, followed by acetoclastic methanogen Methanosaeta and Methanosarcina, which could use various methanogenic substrates. The fungal communities mainly included Amorphotheca, Alternaria, Aspergillus, and Penicilium, which are all able to degrade complex organics such as aromatics and lignin. After cultivation, the crystal structure of anthracite became looser, as shown by XRD results, which might be due to the swelling effect caused by the destruction of the aromatic ring structure of coal under the function of fungi. The stretching vibration intensity of each functional group in coal decreased with cultivation, as revealed by FTIR. The GC-MS results showed that the concentration of alkanes and alcohols decreased significantly, which are the products of ring-opening of aromatics by fungi. These results suggested that fungi and methanogens in the coalbed also can syntrophically degrade coal effectively, especially for aromatics in coal.