Exploring Non-Toxic Lower Dimensional Perovskites for Next-Generation X-Ray Detectors.

Owing to their extraordinary photophysical properties, organometal halide perovskites are emerging as a new material class for X-ray detection. However, the existence of toxic lead makes their commercialization questionable and should readily be replaced. Accordingly, several lead alternatives have been introduced into the framework of conventional perovskites, resulting in various new perovskite dimensionalities. Among these, Pb-free lower dimensional perovskites (LPVKs) not only show promising X-ray detecting properties due to their higher ionic migration energy, wider and tunable energy bandgap, smaller dark currents, and structural versatility but also exhibit extended environmental stability. Herein, first, the structural organization of the PVKs (including LPVKs) is summarized. In the context of X-ray detectors (XDs), the outstanding properties of the LPVKs and active layer synthesis routes are elaborated afterward. Subsequently, their applications in direct XDs are extensively discussed and the device performance, in terms of the synthesis method, device architecture, active layer size, figure of merits, and device stability are tabulated. Finally, the review is concluded with an in-depth outlook, thoroughly exploring the present challenges to LPVKs XDs, proposing innovative solutions, and future directions. This review provides valuable insights into optimizing non-toxic Pb-free perovskite XDs, paving the way for future advancements in the field.

Advancements in Perovskite-Based Cathode Materials for Solid Oxide Fuel Cells: A Comprehensive Review.

The high-temperature solid oxide fuel cells (SOFCs) are the most efficient and green conversion technology for electricity generation from hydrogen-based fuel as compared to conventional thermal power plants. Many efforts have been made to reduce the high operating temperature (>800 °C) to intermediate/low operating temperature (400 °C

In situ growth of dual-responsive polymer as coating for open tubular capillary electrochromatographic separation of epimedins.

Recently, open tubular capillary electrochromatography (OT-CEC) has captured considerable interest; its efficient separation capability hinges on the interactions between analytes and polymer coatings. However, in situ growth of stimuli-responsive polymers as coatings has been rarely studied and is crucial for expanding the OT-CEC technique and its application. Herein, following poly(styrene-maleicanhydride) (PSM) chemically bonded onto the inner surface of the capillary, a dual pH/temperature stimuli-responsive block copolymer, P(SMN-COOH), was prepared by in situ polymerizing poly(N-isopropylacrylamide) carboxylic acid terminated [P(N-COOH)] in PSM. An OT-CEC protocol was first explored using the coated capillary for epimedins separation. As a proof of concept, the developed OT-CEC system facilitated hydrogen bonding and tuning the hydrophilic/hydrophobic interactions between the test analytes and the P(SMN-COOH) coating by varying buffer pH and environmental temperature. Four epimedins with similar chemical structures were baseline separated under 40 °C at pH 10.0, exhibiting dramatical improvement in separation efficiency in comparison to its performance under 25 °C at pH 4.0. In addition, the coated capillary showed good repeatability and reusability with relative standard deviations for migration time and peak area between 0.7 and 1.7% and between 2.9 and 4.6%, respectively, and no significant changes after six runs. This work introduces a paradigm for efficient OT-CEC separation of herbal medicines through adjusting the interactions between analytes and smart polymer coatings, addressing polymer coating design and OT-CEC challenges.

Angiographic characteristics of culprit lesions in infarct related artery and correlation of TIMI score with SYNTAX score to predict extent and severity of coronary artery disease in patients undergoing primary percutaneous coronary interventions.

Objective: The current study was designed to explore the relationship of TIMI and SYNTAX risk score to predict the CAD extent and severity in STEMI patients. Methods: For this cross-sectional study, 304 STEMI patients undergoing PPCI were enrolled at Department of Interventional Cardiology NICVD Karachi from September 2021 to January 2022. and the TIMI risk score was determined at enrolment. Based on these scorings, the patients were grouped as low, intermediate, and high risk, i.e., a score of ≤ 3, 4 to 7, and ≥ 8, respectively. The SYNTAX scores were utilized to assess the extent of CAD. Results: Statistically significant difference was found in symptoms to balloon time (p=0.001), history of diabetes (p=0.006), angina (p=0.011), obesity (p=0.048), STEMI type (p=0.003), Killip classes (p=0.000), Infarct-Related Artery (p=0.006), number of diseased vessels (p<0.01), LMS > 50% (p=0.000), PCI type (p<0.01), collateral circulation (p<0.01), In-hospital mortality (p<0.01), LV support (p<0.01), and post-procedural TIMI flow (p=0.013), among the three TIMI risk groups. Significant correlation was found among TIMI risk score and SYNTAX score. Conclusion: It is observed that the TIMI risk scores are highly correlated with the SYNTAX Score in predicting the CAD severity in STEMI patients.

Cost-Effective and Highly Efficient Manganese-Doped MoS2 Nanosheets as Visible-Light-Driven Photocatalysts for Wastewater Treatment.

One of the main objectives in wastewater treatment and sustainable energy production is to find photocatalysts that are favorably efficient and cost-effective. Transition-metal dichalcogenides (TMDs) are promising photocatalytic materials; out of all, MoS2 is extensively studied as a cocatalyst in the TMD library due to its exceptional photocatalytic activity for the degradation of organic dyes due to its distinctive morphology, adequate optical absorption, and rich active sites. However, sulfur ions on the active edges facilitate the catalytic activity of MoS2. On the basal planes, sulfur ions are catalytically inactive. Injecting metal atoms into the MoS2 lattice is a handy approach for triggering the surface of the basal planes and enriching catalytically active sites. Effective band gap engineering, sulfur edges, and improved optical absorption of Mn-doped MoS2 nanostructures are promising for improving their charge separation and photostimulated dye degradation activity. The percentage of dye degradation of MB under visible-light irradiations was found to be 89.87 and 100% for pristine and 20% Mn-doped MoS2 in 150 and 90 min, respectively. However, the degradation of MB dye was increased when the doping concentration in MoS2 increased from 5 to 20%. The kinetic study showed that the first-order kinetic model described the photodegradation mechanism well. After four cycles, the 20% Mn-doped MoS2 catalysts maintained comparable catalytic efficacy, indicating its excellent stability. The results demonstrated that the Mn-doped MoS2 nanostructures exhibit exceptional visible-light-driven photocatalytic activity and could perform well as a catalyst for industrial wastewater treatment.

Synovial sarcoma: a rare neoplasm of paranasal sinus.

Synovial Sarcoma (SS) is a rare soft-tissue malignant tumour. Its presentation in the head and neck region is uncommon. Because of the complex anatomy of the head and neck region, surgery with clear margins is not achievable. In such cases, a multi-modality approach is required as there is no established standard of care. In this report, we share the case of a girl who presented with nasal obstruction. Imaging revealed a mass involving the left nasal cavity, paranasal sinuses without intracranial extension. It was diagnosed as synovial sarcoma. She underwent surgical excision and adjuvant radiation therapy (RT) to the tumour bed, followed by an incomplete course of chemotherapy. Later on, she developed systemic disease. Considering the rarity of this case and lack of guidelines for standard treatment, we report on this case to share our experience with management and treatment outcome.

Edge Rich Ultrathin Layered MoS2 Nanostructures for Superior Visible Light Photocatalytic Activity.

Nanostructures of layered 2D materials have been proven one of the significant recent trends for visible-light-driven photocatalysis because of their unique morphology, effective optical adsorption, and rich active sites. Herein, we synthesized ultrathin-layered MoS2 nanoflowers and nanosheets with rich active sites by using a facile hydrothermal technique. The photocatalytic performance of the as-synthesized MoS2 nanoflowers (NF) and nanosheets (NS) were investigated for the photodegradation of MB (methylene blue), MG (malachite Green), and RhB (rhodamine B) dye under visible light irradiations. Ultrathin-layered nanoflowers showed faster degradation (96% in 150 min) in RhB under visible light irradiation, probably due to a large number of active sites and high available surface area. The kinetic study demonstrated that the first-order kinetic model best explained the process of photodegradation. The MoS2 nanoflowers catalysts has similar catalytic performance after four consecutive cyclic performances, demonstrating their good stability. The results showed that the MoS2 nanoflowers have outstanding visible-light-driven photocatalytic activity and could be an effective catalyst for industrial wastewater treatment.

Perspectives of nervonic acid production by Yarrowia lipolytica.

Nervonic acid (cis-15-tetracosenoic acid, 24:1Δ15) is a long chain monounsaturated fatty acid, mainly exists in white matt er of the human brains. It plays an important role in the development of nervous system and curing neurological diseases. The limited natural sources and high price are considered limiting factors for the extensive application of nervonic acid. Yarrowia lipolytica is a high lipid producing yeast and engineered strain which can produce nervonic acid. The biosynthesis of nervonic acid has yet to be investigated, although the metabolism has been examined for couple of years. Normally, oleic acid is considered the origin of nervonic acid synthesis through fatty acid prolongation, where malonyl-CoA and acyl-CoA are initially concise by 3-ketoacyl-CoA synthase (KCS). To meet the high requirement of industrial production, the optimization of fermentation and bioreactors configurations are necessary tools to be carried out. This review article summarizes the research literature on advancements and recent trends about the production, synthesis and properties of nervonic acid.

Total skin electron beam therapy (TSEBT) in management of mycosis fungoides: A case series.

A retrospective review was conducted In Aga Khan University from January 2013-December 2020 for patients who received Total Skin Electron Beam Therapy (TSEBT) on the management of Mycosis Fungoides (MF). The clinical response rate and disease-free interval (DFI) was evaluated for three patients. All of the patients received a 3600 cGy dose of radiation. Clinical complete remission (cCR) was observed in two out of three patients, while one patient showed clinical partial response. Following the cCR to TSEBT, the DFI of the first patient with stage 1B lasted 30 months, while the second patient with stage IIB remained disease free for five months. TSEBT is an effective treatment for MF disease. It can thus be expected that patients with limited disease in the early stage can acquire a cCR with a longer DFI. The clinical outcomes of our study show concordance with the literature. The patients who had extensive (T3) skin involvement and had refractory diseases showed lower DFI with radiation.

Solitary rib metastasis from primary nasopharyngeal carcinoma: A rare clinical presentation.

We report a case of a middle age male who presented to our tertiary care university hospital with the complaints of nasal obstruction and decrease hearing. The CT scan of head and neck exhibited a mass in nasopharynx and enlarged bilateral cervical lymph nodes. Biopsy from nasopharynx confirmed the lesion as poorly differentiated non-keratinizing squamous cell carcinoma and staged as cT2N2M0. He received neoadjuvant chemotherapy. Subsequently, he underwent chemo radiation therapy. He represented with left chest wall pain. Imaging confirmed isolated lesion on left sided 6th rib. Rib lesion was resected followed by radiation therapy to surgical bed and systemic treatment. The patient remained disease free for 4.5 years. Later, his disease relapsed, and he died of systemic disease progression. To the best of the author's knowledge, only few cases have been reported with isolated rib metastasis from nasopharyngeal carcinoma and this is the first case in which metastasectomy was considered.

Association of autoimmunity and cancer: An emphasis on proteolytic enzymes.

Cancer and autoimmune diseases are the two devastating conditions that together constitute a leading health problem worldwide. The rising burden of these disorders in the developing world demands a multifaceted approach to address the challenges it poses. Understanding the root causes and specific molecular mechanisms by which the progression of the diseases takes place is need of the hour. A strong inflammatory background and common developmental pathways, such as activation of immune cells, proliferation, increased cell survival and migration which are controlled by growth factors and inflammatory cytokines have been considered as the critical culprits in the progression and complications of these disorders. Enzymes are the potential immune modulators which regulate various inflammatory events and can break the circulating immune complexes via macrophages production. In the current manuscript, we have uncovered the possible role of proteolytic enzymes in the pathogenesis and progression of cancer and autoimmune diseases. In the light of the available scientific literature, we advocate in-depth comprehensive studies which will shed light towards the role of proteolytic enzymes in the modulation of inflammatory responses in cancer and autoimmune diseases together.

Design of highly sensitive and selective ethanol sensor based on α-Fe2O3/Nb2O5 heterostructure.

The introduction of heterostructures is a new approach in gas sensing due to their easy and quick transport of charges. Herein, facile hydrothermal and solid-state techniques are employed to synthesize an α-Fe2O3/Nb2O5 heterostructure. The morphology, microstructure, crystallinity and surface composition of the synthesized heterostructures are investigated by scanning electron microscope, transmission electron microscope, x-ray diffraction, x-ray photoelectron spectroscopy and Brunauer-Emmett-Teller analyses. The successful fabrication of the heterostructures was achieved via the mutual incorporation of α-Fe2O3 nanorods with Nb2O5 interconnected nanoparticles (INPs). A sensor based on the α-Fe2O3(0.09)/Nb2O5 heterostructure with a high surface area exhibited enhanced gas-sensing features, maintaining high selectivity and sensitivity, and a considerable recovery percentage towards ethanol gas. The sensing response of the α-Fe2O3(0.09)/Nb2O5 heterostructure at lower operating temperature (160 °C) is around nine times higher than a pure Nb2O5 (INP) sensor at 180 °C with the flow of 100 ppm ethanol gas. The sensors also show excellent selectivity, good long-term stability and a rapid response/recovery time (8s/2s, respectively) to ethanol. The superior electronic conductivity and upgraded sensitivity performance of gas sensors based on the α-Fe2O3(0.09)/Nb2O5 heterostructure are attributed due to its unique structural features, high specific surface area and the synergic effect of the n-n heterojunction. The promising results demonstrate the potential application of the α-Fe2O3(0.09)/Nb2O5 heterostructure as a good sensing material for the fabrication of ethanol sensors.

Impact of metformin therapy on health-related quality of life outcomes in tuberculosis patients with diabetes mellitus in India: A prospective study.

OBJECTIVE: To assess the impact of metformin use on health-related quality of life (HRQoL) in tuberculosis (TB) patients who are presented with type 2 diabetes mellitus (T2DM). METHODOLOGY: In this community-based prospective study, TB patients attending Hakeem Abdul Hameed Centenary Hospital, New Delhi (India) and had comorbidity of T2DM between April 2018 and July 2019 were enrolled. Patients were divided into metformin users and metformin non-users on the basis of the presence of metformin in their routine as antidiabetic drug(s). HRQoL was determined using a validated TB-specific tool (Dhingra and Rajpal-12 scale ie, DR-12) consists of symptom and socio-psychological and exercise adaptation domains. The HRQoL scores were compared at pretreatment (1st visit), end of intensive phase (2nd visit) and end of treatment (3rd visit) between the two groups. RESULTS: A total of 120 patients were enrolled, of which 24 were excluded as they did not respond at follow-up visits. Among the metformin users (n = 48) the mean age of patients was 47.56 years and 62.50% was males. Among the metformin non-users (n = 48), the mean age of patients was 49.02 years and 54.10% was males. The baseline characteristics were similar in both groups except for the substance used history (P = .025), literacy level (P = .048) and BMI (P = .028). Metformin users demonstrated significant improvement in symptom scores (2nd visit: P < .001; 3rd visit: P = .001) and socio-psychological and exercise adaptation scores (2nd visit: P < .0001; 3rd visit: P < .0001) as compared with metformin non-users at 2nd visit and 3rd visit. Overall, scores were also found to be significantly improved in metformin users (2nd visit: P < .001; 3rd visit: P = .001). CONCLUSION: Metformin therapy exerted favourable effects on HRQoL in patients with TB and T2DM and can be recommended as an adjuvant antitubercular drug in TB patients with co-morbidity of T2DM, unless contraindicated.

The role of band structure in Co- and Fe-co-doped Ba0.5Sr0.5Zr0.1Y0.1O3-δ perovskite semiconductor to design an electrochemical aptasensing platform: application in label-free detection of ochratoxin A using voltammetry.

Nanocomposites can offer a platform to conjugate biorecognition features of aptamer with unique size-dependent properties of a given material, which can autoprobe the binding event based on their electroactive characteristics. Herein, we design electroactive switchable aptamer probes based on co-doped single-phase semiconducting materials employing the cyclic voltammetry method to record the current signal at each step of electrochemical characterization. To do so, we utilized a facile hydrothermal method assisted by co-precipitation method such as Co-Fe-co-doped Ba0.5Sr0.5Zr0.1Y0.1O3-δ (CF-BSZY) and tuned the alignment of the energy band structure of the material to amplify the output of the electrochemical signal. At various steps, changes occurred in the electrochemical properties at the surface of CF-BSZY. The binding of the ssDNA with prepared materials enhances the current signal by the interaction with the target (ochratoxin A (OTA)) depressing the current signal and facilitating the construction of a novel design of electrochemical aptasensor. As a proof of concept, an electrochemical aptasensor for the detection of ochratoxin A (OTA) in rice samples has been developed. The electrochemical aptasensor provides a limit of detection (LOD) of 0.00012 µM (0.12 nM), with a linear range from 0.000247 to 0.74 µM and sound OTA recovery in real samples. The developed aptasensor is simply designed and is free of oligonucleotide labeling or decorative nanoparticle modifications. The proposed mechanism is generic in principle with the potential to translate any type of aptamer and target binding event into a detectable signal; hence, it can be largely applied to various bioreceptor recognition phenomena for subsequent applications.

Exploration of Two Pectate Lyases from Caldicellulosiruptor bescii Reveals that the CBM66 Module Has a Crucial Role in Pectic Biomass Degradation.

Pectin deconstruction is the initial step in breaking the recalcitrance of plant biomass by using selected microorganisms that encode pectinolytic enzymes. Pectate lyases that cleave the α-1,4-galacturonosidic linkage of pectin are widely used in industries such as papermaking and fruit softening. However, there are few reports on pectate lyases with good thermostability. Here, two pectate lyases (CbPL3 and CbPL9) from a hyperthermophilic bacterium, Caldicellulosiruptor bescii, belonging to family 3 and family 9 polysaccharide lyases, respectively, were investigated. The biochemical properties of the two CbPLs were shown to be similar under optimized conditions of 80°C to 85°C and pH 8 to 9. However, the degradation products from pectin and polygalacturonic acids (pGAs) were different. A family 66 carbohydrate-binding module (CbCBM66) located in the N terminus of the two CbPLs shares 100% amino acid identity. A CbCBM66-truncated mutant of CbPL9 showed lower activities than the wild type, whereas CbPL3 with a CbCBM66 knockout portion was reported to have enhanced activities, thereby revealing the different effect of CbCBM66. Prediction by the I-TASSER server revealed that CbCBM66 is structurally close to BsCBM66 from Bacillus subtilis; however, the COFACTOR and COACH programs indicated that the substrate-binding sites between CbCBM66 and BsCBM66 are different. Furthermore, a substrate-binding assay indicated that the catalytic domains in the two CbPLs had strong affinities for pectate-related substrates, but CbCBM66 showed a weak interaction with a number of lignocellulosic carbohydrates. Finally, scanning electron microscopy (SEM) analysis and a total reducing sugar assay showed that the two enzymes could improve the saccharification of switchgrass. The two CbPLs are impressive sources for the degradation of plant biomass.IMPORTANCE Thermophilic proteins could be implemented in diverse industrial applications. We sought to characterize two pectate lyases, CbPL3 and CbPL9, from a thermophilic bacterium, Caldicellulosiruptor bescii The two enzymes share a high optimum temperature, a low optimum pH, and good thermostability at the evaluated temperature. A family 66 carbohydrate-binding module (CbCBM66) was identified in the two CbPLs, sharing 100% amino acid identity. The deletion of CbCBM66 dramatically decreased the activity of CbPL9 but increased the activity and thermostability of CbPL3, suggesting different roles of CbCBM66 in the two enzymes. Moreover, the degradation products of the two CbPLs were different. These results revealed that these enzymes could represent potential pectate lyases for applications in the paper and textile industries.

Evaluation of bacterial association in methane generation pathways of an anaerobic digesting sludge via metagenomic sequencing.

Anaerobic digestion, a recently hot technology to produce biogases especially methane generation for biofuel from wastewater, is considered an effective explanation for energy crisis and global pollution threat. A complex microbiome population is present in sludge, which plays an important role in the digestion of complex polymer into simple monomers. 16S rRNA approaches simply are not enough for amplification due to the involvement of extreme complex population. However, Illumina sequencing is a recent powerful technology to reveal the entire microbiome structure and methane generation pathways in anaerobic digestion. Metagenomic sequencing was tested to reveal the microbial structure of a digested sludge from a local wastewater treatment plant in Beijing. The Illumina HiSeq program was used to extract about 5 GB of data for metagenomic analysis. The classification investigation revealed about 97.64% dominancy of bacteria while 1.78% were detected to be archaea using MG-RAST server. The most abundant bacterial communities were reported to be Actinobacteria, Bacteroidetes, Firmicutes and Proteobacteria. Furthermore, the important microbiome involved in methane generation was revealed. The dominant methanogens were detected (Methanosaeta and Methanosarcina), with affiliation of dominant genes involved in acetoclastic methanogenesis in a digesting sludge. The metagenomic analysis showed that microbial structure and methane generation pathways were successfully dissected in an anaerobic digester.

Dissecting microbial community structure in sewage treatment plant for pathogens' detection using metagenomic sequencing technology.

Continuous observation of wastewater treatment plants is very crucial to keep them safe for proper use and protection from pathogenic contamination. Illumina sequencing technology was used for microbiome structuring from various samples taken from different portions of the wastewater treatment plant, including influent, activated, return sludge and effluent, where different microbial compositions were found. The effluent section was found to have pathogenic microbes such as viruses, Alpha- and deltaproteobacteria, Actinobacteria, Bacteroidetes, clostridia, and bacilli in various concentrations. The presence of viruses, Mycobacterium sp., Mycobacterium fortuitum, bacteroidia, and bacilli was investigated. The species Mycobacterium was found to be higher in quantity in the effluent section. Viruses, including hepatitis A and E, were detected in higher quantity in the effluent part of the sludge in comparison with the influent part of the plant. Our discovery reveals the significance and observation of wastewater treatment plants for the existence of water-borne pathogens in the effluent, principally due to the effect on humans while reusing the water.

Lead-Free Antimony Halide Perovskite with Heterovalent Mn2+ Doping.

Lead toxicity is hindering the applications of conventional lead halide perovskites (PVKs), and antimony (Sb) is a promising nontoxic Pb alternative, showing huge potential in optoelectronic devices. Herein, pure and Mn-doped Cs3Sb2Cl9 crystals are synthesized in a facile route and studied both experimentally and theoretically. All the pure and Mn-doped Cs3Sb2Cl9 crystals show good crystallinity and similar crystal structures, exhibiting visible photoluminescence (PL) characteristics with emission peaks at 422 and 613 nm, respectively. Combined density functional theory (DFT) calculations and experimental analyses reveal that the structure of the host PVK compound Cs3Sb2Cl9 is not influenced by the formation of [MnCl6]4- octahedra and that Mn 3d orbitals generate impurity states in the forbidden energy gap of Cs3Sb2Cl9. Therefore, energy transfer from Cs3Sb2Cl9 to Mn 3d states is observed, resulting in the d-d transition and bright red luminescence. Mn-doped Sb-based PVK can be utilized as a new platform for optoelectronic applications.

Combinations of alkaline hydrogen peroxide and lithium chloride/N,N-dimethylacetamide pretreatments of corn stalk for improved biomethanation.

The purpose of this study was to improve methane generation from corn stalk (CS) through alkaline hydrogen peroxide and lithium chloride/N,N-dimethylacetamide (AHP-LiCl/DMAc) pretreatment. Changes in the structures of treated and untreated CSs were investigated, and biomass components, including cellulose, hemicellulose and lignin, were analysed. Our findings revealed that AHP-LiCl/DMAc pretreatment improved accumulative methane yield by forceful delignification and effectively destroyed the structure of cellulose. The AHP-LiCl/DMAc-treated group had a maximum methane yield of 318.6 ± 17.85 mL/g volatile solid, which was 40.08% and 10.10% higher than the maximum methane yields of the untreated and AHP-treated group, respectively. This result showed enhanced cellulose dissolution by the ionic solvent of LiCl/DMAc and improved enzymatic saccharification in fermentative bacteria without structural modifications. The AHP-LiCl/DMAc treated group had higher glucose level, acetate followed by biomethanation process. Furthermore, the decrease in crystallinity indexes for AHP-LiCl/DMAc treated group was reported. Overall, this investigation proved a promising pretreatment approach for enhancing the degradation of CS into reducing sugars and improving methane generation.

Swine manure valorization in fabrication of nutrition and energy.

Renewable energy can boost the growing population's need and rapid budgetary development. To reduce fossil fuel consumption is the initial purpose of renewable and sustainable energy, producing valuable bio-based products. The fermenters, using for pretreatment of swine manure, and involvement of swine carcasses are reported to enhance organic loading rate followed by improved biogas yield on household digesters. The compositions such as animal residues, pathogenic microbes, pharmaceutical residues and nutrient compositions including undigested feed are still confused. Therefore, it is mandatory to optimize and stabilize anaerobic practice and digestate filtration purification for consequential fertilizer consumption. The effective bio-methane recovery from energy-rich compounds is challenging due to slow degradation procedures. The pretreatment procedure could enhance lipid depolymerization and improve anaerobic fermentation. This article deeply focuses on biodegradation of swine manure. The components of this manure were evaluated and established several approaches to improve biogas production. Furthermore, recycling of co-digestates was discussed in detail as fertilizer consumption including hygienic aspects of manure and pretreatment strategies of biomass residues. KEY POINTS: • Co-digestion of manure and carcasses enhance bio-methane production. • Removel of ammonia from biogas digester may improve bio-methane gas. • A strong antimicrobial influence has been reported on biogas production.