Intracanal removal and apical extrusion of filling material after retreatment using rotary or reciprocating instruments: A new approach using human cadavers.

AIM: This study compared intracanal removal of filling as well as the frequency and volume of extruded material after retreatment with either HyFlex or Reciproc instruments in mandibular teeth from cadavers. METHODOLOGY: The root canals of 14 pairs of contralateral single-rooted teeth in mandibles of cadavers were instrumented with Reciproc R40 and filled using lateral compaction. The mandibles were scanned in a micro-computed tomographic (micro-CT) device before and after retreatment procedures. The contralateral teeth were assigned to two groups (n = 14) according to the retreatment protocol using either HyFlex or Reciproc instrument systems. In the HyFlex group, the HyFlex Remover instrument was worked 3 mm short of the working length (WL), followed by HyFlex CM 40.04 and 50.04 at the WL. In the Reciproc group, the R50 instrument was worked up at the coronal two thirds, followed by two more cycles until the WL was reached. Pre- and post-operative micro-CT images were analysed for extrusion and intracanal removal of filling material. RESULTS: After retreatment, extrusion of filling material occurred in 11 (78%) and 14 (100%) teeth from HyFlex and Reciproc groups respectively (p > .05). A similar volume of extruded material was observed after retreatment with both systems (p > .05). A significant decrease in the intracanal filling volume was verified after retreatment with both tested systems (p < .05). However, residual filling material was found in all root canals, regardless of the system. The amount of filling material removed (HyFlex = 80.8%; Reciproc = 65.9%) and the operation time was similar between systems (p > .05). CONCLUSIONS: A high frequency of filling material extrusion was observed after retreatment with the two systems in a cadaver model, with no significant difference between them. Both protocols obtained similar efficacy in filling material removal procedures, although none completely cleaned the canals.

The effect of root canal preparation tapers on planktonic bacteria and biofilm reduction in the apical third: A correlative microtomography and microbiological laboratory study.

AIM: To evaluate the influence of different preparation tapers on the reduction in planktonic bacteria and biofilms of Enterococcus faecalis and Candida albicans in the apical third (4 mm) of the mesial roots of mandibular molars, correlating decontamination with canal shape. METHODOLOGY: After microtomography analysis for morphological standardization of the canals, 48 mandibular molar roots, each containing two canals (96 canals), were contaminated with E. faecalis and C. albicans and divided into four groups (n = 11) for canal instrumentation using ProDesign Logic 2 files with different tapers G (.03): # 25.03; G (.04): # 25.04; G (.05): # 25.05; and G (.06): # 25.06 and irrigation with 2.5% sodium hypochlorite. Four roots were examined under a scanning electron microscope (SEM) to qualitatively assess biofilm formation. Eight roots were used as the negative control group (samples were not contaminated). Bacteriological samples were taken exclusively from the apical third of the roots before and after chemical-mechanical preparation and bacterial counts were determined (CFU/mL). The final micro-CT scan was used to quantify the volume variation and unprepared canal area in the apical third. Statistical analysis was performed using the Kruskal-Wallis, Student-Newman-Keuls and Wilcoxon tests for analysis of microbiological data. anova and the Tukey or Games-Howell test were used for analysis of micro-CT data and Spearman's test for correlations (α = 5%). RESULTS: All groups showed a significant reduction in bacteria (p < .05), with no statistically significant difference between groups. There was no significant difference in per cent volume increase between groups. The unprepared area (Δ%) was affected by the file used (p = .026) and was significantly lower for G (.06) compared to G (.03). There was no statistically significant correlation among bacterial reduction, volume and unprepared area (p > .05). CONCLUSION: The different preparation tapers influenced root canal shaping in the apical third but did not improve decontamination in this region.

Hospital-acquired undernutrition and associated factors in children and adolescents admitted to a tertiary care hospital.

BACKGROUND: The present study aimed to verify the proportion and factors associated with hospital-acquired malnutrition in the paediatric unit of a tertiary care hospital. METHODS: A retrospective study was carried out in a tertiary care hospital in the state of Maranhão, Brazil. Demographic and clinical data on children and adolescents were collected from medical records and the data regarding weight, height and z-scores of anthropometric indicators were obtained from the World Health Organization (WHO) Anthro® and WHO Anthro Plus® applications. Those with weight-for-height z-score (< 5 years) and a body mass index (BMI)/age z-score (≥ 5 years) < -2 SD at admission were considered to be malnourished. Patients who presented a decrease of > 0.25 SD between the z-score of BMI-for-age (BMIZ) at admission and at discharge were classified as having hospital-acquired malnutrition. Weight loss was also evaluated and was considered significant when it was > 2% between the weight measured at admission and the one before discharge. Logistic regression analysis was performed to verify the factors associated with hospital-acquired malnutrition. RESULTS: The median age was 4.7 years and the length of stay was 21 days; 26.8% of patients had significant weight loss during hospitalisation and a greater proportion had hospital-acquired malnutrition (34.9%). Gastroenteropathies, neuropathies and malnutrition on admission were significantly associated with hospital-acquired malnutrition. CONCLUSIONS: The occurrence of hospital-acquired malnutrition is still a problem in paediatric patients. Thus, providing adequate nutritional support from admission is essential when aiming to avoid deterioration of the nutritional status of paediatric patients during hospitalisation.

Enhancing debris removal in curved canals: a comparative evaluation of XP-endo Finisher and Passive Ultrasonic Irrigation.

OBJECTIVES: The study aimed to compare the efficacy of XP-endo Finisher and Passive Ultrasonic Irrigation (PUI) in removing hard tissue debris from curved canals. MATERIALS AND METHODS: Thirty-four mandibular molars with Vertucci's type II mesial canals were scanned in microcomputed tomography before and after preparation with HyFlex EDM, and accumulated hard tissue debris was quantified. Subsequently, the teeth were randomly divided into two groups according to the supplementary procedure: PUI with the Ultra-X insert or XP-endo Finisher. After the intervention, the specimens underwent another scanning. Two separate analyses were conducted, one for the total canal and another for the isthmus area. Unpaired and paired T-tests were used for inter- and intergroup comparisons, with a significance level set at 5%. RESULTS: Both supplementary methods reduced the amount of debris compared to the initial volume. Remarkably, the XP-endo Finisher achieved a significantly higher percentage of debris removal (71% for the total canal and 74% for the isthmus areas) compared to PUI (41% for the total canal and 52% for the isthmus area) (P < 0.05). CONCLUSIONS: Both supplementary approaches reduced the amount of hard tissue debris from canal preparation, still XP-endo Finisher showed a higher reduction compared to PUI (p < 0.05). CLINICAL RELEVANCE: None of the supplementary methods rendered canals completely free of hard tissue debris. However, the supplementary approach with XP-endo Finisher resulted in lower levels of hard tissue debris than PUI in curved canals with isthmuses.

Apical transportation using Mtwo or Reciproc retreatment systems in severely curved canals: a micro-computed tomographic study.

OBJECTIVE: To assess apical root canal transportation using Mtwo or Reciproc during retreatment of severely curved canals, using a multi-analytical approach. METHODS: Forty mesial canals from mandibular molars (Vertucci type IV) were evaluated before and after endodontic retreatment to compare apical transportation with Mtwo retreatment or Reciproc. The systems were used on the same root but alternating the mesial canals. The analyses were performed by micro-computed tomography. Four evaluations were performed: (a) longitudinal transportation, (b) horizontal transportation, (c) variation in the angle of curvature of the canal, and (d) canal-root width ratio. Horizontal transportation and canal-root width ratio were evaluated in 1-, 3-, and 5-mm levels. RESULTS: Longitudinal transportation occurred in all samples, with a mean of 0.13 mm for Mtwo and 0.17 mm for Reciproc. Horizontal transportation increased as distant from the apex was the evaluated level, in mean. However, the transport was not observed in all samples. The mean angle of curvature was 4.16 for Mtwo and 3.03 for Reciproc. Canal-root width decreased as distant from the apex was the evaluated level. No significant differences were observed considering all tested variables, independently of the retreatment system or evaluated level (p > 0.05). CONCLUSION: Mtwo retreatment and Reciproc presented similar apical transportation (horizontal or vertical). CLINICAL RELEVANCE: Both Mtwo retreatment and Reciproc systems could be considered safe regarding apical transportation.

Instrumentation time and effectiveness of hand and rotary files in a prototyped second mandibular primary molar: A micro-CT study.

BACKGROUND: Eccentric instruments have been proposed as more effective and less time-consuming for endodontic instrumentation. AIM: To compare biomechanical outcomes of different instrumentation systems and time undertaken for instrumentation in resin prototypes. DESIGN: Sixty standardized prototypes of mandibular second primary molars were instrumented according to the following systems: K-files, ProTaper Next (PTN), XP-endo Shaper (XPS), XP-endo Finisher (XPF), XP-Clean (XPC), and Sequence Baby File (SBF; n = 10/each). Irrigation was performed with saline with simultaneous aspiration, and time spent was recorded. The prototypes were micro-CT-scanned before and after the instrumentation, and image sets were reconstructed and registered. Non-instrumented areas, accumulated debris, removed root material volume, and canal transportation were quantified. Data were analyzed through ANOVA, the Kruskal-Wallis test, and the Wilcoxon signed-rank test (α = 5%). RESULTS: K-files and SBF resulted in more instrumentation time (p < .05). SBF, XPC and PTN removed less root dentine (p < .05), but PTN left more untouched areas (p < .05). Accumulated debris were lower for XPC and SBF (p < .05). Canal transportation was similar among the groups. CONCLUSION: Rotary systems reduced instrumentation time, whereas SBF and XPC resulted in more conservative instrumentation, with less debris accumulation and non-instrumented areas. A dedicated paediatric endodontic system (SBF) outperformed eccentric instruments in terms of effectiveness.

Shaping ability of new reciprocating or rotary instruments with two cross-sectional designs: An ex vivo study.

AIM: This study compared the shaping ability of four new reciprocating and rotary nickel-titanium instruments, with triangular or S-shaped cross-section, in the mesial canals of mandibular molars using micro-computed tomographic (micro-CT) evaluation. METHODOLOGY: Twenty-four extracted mandibular molars with Vertucci's class IV configuration in the mesial root were selected for this study. The teeth were matched in fours according to anatomic similarities as revealed by micro-CT and then distributed into four groups of 12 mesial canals each according to the instrumentation technique: Reciproc Blue, R-motion, VDW.Rotate and RaCe EVO. The final apical size of instrumentation was 30/0.04 for three systems and 25/08 for the Reciproc Blue instrument. Micro-CT scans were taken before and after preparation to evaluate the canal volume, area and unprepared surface areas, as well as the centring ability, and the canal: root width ratio. RESULTS: Preparation with all systems significantly increased the volume and area of the canals (p < .05). There were no significant differences between groups regarding the amount of unprepared areas in both the apical and full canal lengths (p > .05). Variation in the centre of gravity showed no significant difference between groups either (p > .05). The canal: root width ratio at levels 0 and 4 mm apically to the coronal canal opening was significantly increased by all systems (p < .01), with no significant differences between groups (p > .05). The canal width never exceeded 40% of the root width. CONCLUSIONS: Reciprocating or rotary instruments, with a triangular or an S-shaped cross-section, performed equally in shaping Vertucci's class IV mesial canals of mandibular molars.

Influence of conservative endodontic access cavities on instrumentation of oval-shaped straight root canals.

AIM: To evaluate the influence of the design of endodontic access cavities on the percentage of unprepared areas of canal walls and flexural fatigue of instruments activated by reciprocating movement in oval-shaped straight root canals of extracted teeth. METHODOLOGY: Forty-two mandibular incisors with oval canals were scanned by a microcomputed tomography (micro-CT) device for homogeneous selection and distribution of the samples. Then, the teeth were divided into two groups (n = 21) according to the design of access cavity being tested: ultraconservative endodontic access cavity (UltraAC) and traditional access cavity. The canals were accessed with the aid of a surgical microscope, instrumented with the WaveOne Gold Medium system and irrigated with 2.5% NaOCl and 17% EDTA. The unprepared areas of the canal wall were analysed by overlaying images before and after instrumentation and expressed as percentages. micro-CT data were analysed using t-test, Mann-Whitney and Wilcoxon tests. The endodontic instruments used during instrumentation were subjected to static flexural fatigue testing using an artificial stainless steel canal with a 60° angle of curvature and a radius of 5 mm, located 5 mm from the tip of the instrument. The instruments were activated until fracture occurred, and the time in seconds for the fracture was recorded using a digital timer. The number of cycles to fracture was calculated and analysed statistically. For flexural fatigue data, an anova test complemented by a Tukey range test was used. The significance level of 5% was used for all analyses. RESULTS: There was no significant difference between the groups related to unprepared areas by the instrument during canal preparation (p > .05). The difference in flexural fatigue resistance between the groups was not significant. CONCLUSION: The use of UltraAC did not interfere with the canal instrumentation of extracted mandibular incisors with straight and oval canals. There was no difference in the flexural fatigue resistance of the instruments in relation to access cavity design.

Unprepared surface areas, accumulated hard tissue debris, and dentinal crack formation after preparation using reciprocating or rotary instruments: a study in human cadavers.

OBJECTIVES: This study using contralateral teeth from human cadavers assessed the amount of unprepared wall surface areas (USA), accumulated hard tissue debris (AHTD), and dentinal crack formation after root canal preparation using either reciprocating or rotary instruments. MATERIALS AND METHODS: Incisors with a single root canal from 11 human mandibles had their root canals prepared with Reciproc or Mtwo. Each contralateral tooth was treated with one of the test instruments in order to create matched pairs. Micro-CT scans were taken before and after preparation to instrument sizes 40 and 50 in both groups. USA and AHTD were evaluated in the full canal length or the apical portion only. Crack formation was also evaluated in the full root length. RESULTS: After size 40, no significant differences in USA and AHTD were observed in the full canal length (P > .05). Separate analysis of the apical 4-mm canal revealed no difference in AHTD, but significantly more USA with Mtwo than Reciproc (P < .05). After size 50, the amount of USA was similar between groups both in the full canal and in the apical canal (P > .05). More AHTD were observed in the full canal after using Mtwo size 50 (P < .05), but no difference occurred in the apical canal only (P > .05). Intragroup analyses showed a significant decrease of USA and a significant increase of AHTD when preparation size increased from 40 to 50 (P < .05). In teeth without any pre-existing detectable dentinal defect (n = 38), crack formation occurred in 4 teeth, 2 from each preparation system. CLINICAL RELEVANCE: Reciproc instrument size 40 resulted in more prepared areas in the apical canal than Mtwo instrument of the same size. However, the amount of AHTD did not differ between them at this file size. Canal enlargement to size 50 prepared more walls but created more debris. Dentinal defects were produced after preparation with both systems.

Distribution of sodium hypochlorite throughout the mesial root canal system of mandibular molars after adjunctive irrigant activation procedures: a micro-computed tomographic study.

OBJECTIVES: To evaluate and compare irrigant distribution throughout the root canal system of mesial roots of mandibular molars after application of distinct adjunctive irrigant activation procedures. MATERIALS AND METHODS: Fifteen extracted mandibular molars presenting Fan's type II, III, or IV isthmus configurations were selected. The canals were initially enlarged and cleaned. The same specimens were subjected to conventional positive pressure irrigation (PPI) followed by adjunctive irrigation approaches: passive ultrasonic irrigation (PUI), mechanical activation with the XP-endo Finisher instrument, and a control group in which the irrigant remained in the canal with no activation. Retention time for the irrigant was the same for all groups. Sodium hypochlorite mixed with a contrast medium (Omnipaque 300) was used as the irrigant. Before and immediately after the adjunctive irrigation, micro-computed tomographic (micro-CT) scans were taken to evaluate the volume of the entire root canal system that was filled by the irrigant. An exclusive analysis was also done for the isthmus area. RESULTS: Analysis of the entire root canal system showed that the XP-endo Finisher instrument promoted better distribution of the irrigant than PUI and the control group (p < 0.01). PUI was not significantly different from the control group (p > 0.05). A separate analysis of the isthmus area showed no significant difference between the adjunctive irrigation methods and the control (p > 0.05). CONCLUSIONS: The XP-endo Finisher instrument promoted better distribution of irrigant throughout the root canal system, especially in the apical canal segment, when compared to PUI. However, the tested approaches did not differ as to the ability to drive irrigants into the isthmus area. CLINICAL RELEVANCE: This study highlighted that the XP-endo Finisher instrument presented a better performance to distribute irrigant throughout the root canal system, especially in the apical canal segment compared to positive pressure irrigation and PUI.

Root canal obturation materials and filling techniques for primary teeth: In vitro evaluation in polymer-based prototyped incisors.

BACKGROUND: Achieving a void-free root canal filling is a challenge in current clinical pulpectomy practice. AIM: To compare filling effectiveness and internal voids of root filling materials and obturation techniques in resin-prototyped primary incisors by micro-CT. DESIGN: Fifty prototypes were instrumented and randomly divided (n = 10) according to the filling materials (Vitapex® , ZOE, Calcicur® , Feapex, and Calen® -ZO) and obturation technique: lentulo or pressure syringe (n = 5). The specimens were micro-CT scanned (pixel size = 7.83 µm) and reconstructed, and the total volume of filled canal (%FC) and internal voids (%IV) of the bulk filling material was calculated. Kruskal-Wallis and Mann-Whitney tests were used to detect differences and interactions among groups. RESULTS: Calen® -ZO, Vitapex® , and ZOE showed similar %FC. Calcicur® showed lower %FC compared with Calen® -ZO, Vitapex® , and ZOE (P < .05) but similar to Feapex. No statistically significant differences in %FC between lentulo or pressure syringe were disclosed. Regarding %IV, Vitapex® , and Calen® -ZO performed better with syringe, although Calcicur® was better with lentulo. The number of voids in the obturation bulk was similar among materials, but always lower (P < .05) in syringe filled specimens. CONCLUSION: Vitapex® , Calen® -ZO, and ZOE outperformed Calcicur® and Feapex in %FC and if the syringe technique is used, %IV of the obturation bulk and presence of defects was lower.

Reciprocating instrumentation in a maxillary primary central incisor: A protocol tested in a 3D printed prototype.

BACKGROUND: Efficient endodontic instrumentation of primary teeth is a challenge for paediatric dentists. AIM: To evaluate biomechanical outcomes of endodontic instrumentation with a reciprocating system in a polymer-prototyped primary maxillary central incisor. DESIGN: The specimen was systematically instrumented and micro-CT scanned before and after each file. The amount of debris, percentage of non-instrumented areas, removed dentin volume, and lower dentin thickness at specific points along the root canal were analyzed. RESULTS: A 10% increase in removed dentin volume was observed when R40 was compared to R25 (14.5% vs 4.2%). When comparing R50 with R40, this increase was only 3.4% (17.9% vs 14.5%). In the root cervical third, there was substantial reduction in dentin thickness with R50 (48.8%), followed by R40 (39.5%) and R25 (18.6%). There was no difference between R25 and R40 in the removal of dentin at the apical third (15.8%), while R50 resulted in 39.8% reduction in dentin thickness. Percentage of non-instrumented areas were the same for all files. Accumulated debris with R40 and R50 was the same (0.19 mm³) while for R25 was 0.11 mm³. CONCLUSIONS: The Reciproc® system was effective for instrumentation of a prototyped primary maxillary central incisor. The most suitable file for apical preparation was R40.

Satisfaction and limitation of primary health care nurses' work in rural areas.

INTRODUCTION: The health workforce is crucial to reduce inequalities in health and health care in rural areas, and nurses, although there are few professionals and these are poorly distributed compared to other professionals. There are few studies addressing nurses' work in the rural context. This study aimed to investigate the satisfaction and difficulties of the work of primary health care (PHC) nurses in rural areas. METHOD: This is a case study with a qualitative approach, whose subject was the health units in the rural area of a large city in the state of Paraíba, Brazil, with Family Health Strategy teams. Eleven nurses working in rural areas participated in the study. Data were collected through interviews with semi-structured scripts and submitted to content analysis. RESULTS: The study revealed that nurses working in rural areas have experienced job satisfaction with the recognition and gratitude of families, one of the major motivations for professionals interviewed. The nurses are committed and have adequate training in their area of activity. The working conditions, infrastructure, forms of access to the workplace and distance from the decision center are factors that stand out as difficulties of work. CONCLUSIONS: The nurses appreciate each other in their work, establish good relations with the population and work as a team despite the difficulties. The study reveals that nurses and the population experience isolation in the rural area as well as difficulty in accessing the workplace, in the case of practitioners, and in consolidating policies maintained in the urban area. It evidences the nurse as an essential element for PHC in the rural setting, which can make the difference in the care of populations often in the sideline of health services.

Natural canal deviation and dentin thickness of mesial root canals of mandibular first molars assessed by microcomputed tomography.

The aim of this study was to assess the centralization and dentin thickness of mesial root canals of the first mandibular molars by microcomputed tomography (micro-CT). Material and methods: Ninety-nine mandibular molars of Vertucci's type IV canals were scanned by micro-CT. The mesiodistal deviation and centroid were assessed, in both mesiobuccal (MB) and mesiolingual (ML) canals, for the apical 4mm and the full canal length. Results: The dentin thickness was similar for both MB and ML canals. The narrowest thickness was in the distal wall of an MB canal (0.07mm), while the widest was found in the mesial wall of an MB canal (2.46mm). In centroid analysis, both the MB and ML canals exhibited deviations when compared to the root centroid, along the full canal length and the apical 4mm. For the MB canal, the mean deviation was 0.83mm (0.02 mm-2.30 mm) for the full canal and 0.18mm (0.01 mm-1.01 mm) for apical 4mm. Similarly, for the ML canal, the mean deviation measured 0.83 mm (0.05mm-3.99mm) for the full canal and 0.21 mm (0.01mm-1.01mm) for the apical 4 mm. Overall, deviations were observed towards the mesial of the roots, with 69% for MB and 57% for ML canals for the full canal, and 51% for MB canals within the 4 mm. The exception was the ML canal, which exhibited a higher deviation towards distal in the apical 4mm, accounting for 52% of cases. The dentin thickness was consistent between the mesial canals of mandibular molars. However, there is no centrality of mesial canals in their roots, with frequent deviation to mesial.

Efficacy of WaveOne Gold and ProDesign RT systems in removing filling material: a micro-CT analysis.

The remaining filling material after retreatment can harbor bacteria and organic tissues that can influence the outcome of the therapy. AIM: The aim of this study was to evalúate, by micro-CT, the amount of filling material remaining in the root canal after its removal using WaveOne Gold or ProDesign RT. MATERIAL AND METHOD: Forty human mandibular canines were instrumented with the ProTaper Next system up to the X2 instrument (25.06) and filled with gutta-percha cones and AHPlus. Teeth were divided into 2 groups (n=20): WaveOne Gold 25.07 (WOG) and ProDesign RT 25.08 (PRT) for filling removal, after which they were scanned in a micro-CT device to quantify the volume of remaining filling material. The data were subjected to log 10 transformation, Student 's t-test was performed to account for multiple observationsper sample, significance was set at 5%. RESULTS: Student 's t-test showed that there was no difference between the two systems regarding the volume of remaining filling material in the thirds: apical (p = 0.392), middle (p = 0.065), or cervical (p = 0.918). CONCLUSIÓN: Remaining filling material was present in all groups and both systems were similar in removing root filling material in mandibular canines.

A permanencia de material obturador após o retratamento pode abrigar bactérias e tecidos orgánicos que podem influenciar o resultado da terapia. OBJETIVO: O objetivo deste estudo foi avaliar, por micro-CT, a quantidade de material obturador remanescente no canal radicular após a desobturagdo com WaveOne Gold e ProDesign RT. MATERIAL E MÉTODO: Quarenta caninos inferiores humanos foram instrumentados com o sistema ProTaper Next até o instrumento X2 (25.06) e obturados com cones de guta-percha e AHPlus. Os dentes foram divididos em dois grupos (n=20): WaveOne Gold 25.07 (WOG) e ProDesign RT 25.08 (PRT) e escaneados em micro-CT para quantificagdo do volume de material obturador remanescente. Os dados foram submetidos á transformando log 10, o teste t de Student foi realizado para contabilizar múltiplas observagoes por amostra, a significáncia foi fixada em 5%. RESULTADOS: O teste t de Student mostrou que ndo houve diferenga no volume de material obturador remanescente entre os dois sistemas nos tergos: apical (p = 0,392), médio (p = 0,065) ou cervical (p = 0,918). CONCLUSÃO: O material obturador remanescente estavapresente em todos os grupos e ambos os sistemas foram semelhantes na remogdo do material obturador radicular nos caninos inferiores.

Apical periodontitis in endodontically-treated teeth: association between missed canals and quality of endodontic treatment in a Colombian sub-population. A cross-sectional study.

A high prevalence of post-treatment apical periodontitis associated to variables such as endodontic treatment quality and missed canals has been reported. AIM: The aim of this study was to evalúate the quality of endodontic treatment and the frequency of missed canals associated with teeth with apicalperiodontitis (AP) through CBCTin a Colombian sub-population. MATERIAL AND METHOD: This was a cross-sectional study assessing 318 cone beam computed tomography (CBCT) scans of endodontically treated teeth from Colombian individuals. The scans were taken using J Morita X550 (J Morita Corporation, Osaka, Japan), with voxel size 0.125 to 0.20 mm. All endodontically treated teeth were assessed for quality of treatment, presence of missed canals and AP. Allsamples were analyzed bytwo endodontics specialists and an radiology specialist. Chi-square or Fisher 's test and odds ratio were calculated to identify the association and risk relationship between the presence of AP and the study variables. RESULTS: Missed canals were found in 18.61% (86/462), and 95.3% were associated with AP. The frequency of AP was 62.34% (288/462) for all the evaluated teeth. AP was found in 27.43 % (79/288) of the teeth with adequate endodontic treatment, in contrast to 72.57% (209/288) of the teeth with inadequate treatment (P<0.01). The frequency of missed canals was highest in maxillary molars, with 55.23% (58/105), with 96.55% presenting AP. The second mesiobuccal canal wasthe most frequently missed canal, 88.52%o(54/61), with AP in 90.74% (49/54) of the cases. CONCLUSIÓN: There was a high frequency of teeth with missed canals and PA. More than half of the teeth with missed canals were maxillary molars, with MB2 being the most common canal, commonly presenting apical periodontitis.

Uma alta prevalência de periodontite apical pós-tratamento associada a variáveis como qualidade do tratamento endodôntico e fracasso do tratamento é relatada na literatura. O objetivo deste estudo foi avaliar a qualidade do tratamento endodôntico e a frequência e fracasso do tratamento associados a dentes com periodontite apical (PA) por meio de tomografia computadorizada de feixe cônico (TCFC) em uma subpopulação colombiana. MATERIAL E MÉTODO: Este foi um estudo transversal que avaliou 318 tomografias computadorizadas de dentes tratados endodonticamente de indivíduos colombianos. Os exames foram realizados utilizando o tomógrafo J Morita X550, com tamanho de voxel de 0,125 a 0,20 mm. Todos os dentes tratados endodonticamente foram avaliados quanto à qualidade do tratamento, presença de canais não localizados e AP. Todas as amostras foram avaliadas por dois especialistas em endodontia e um especialista em radiologia. Foram calculados o teste qui-quadrado ou de Fisher e a razão de chances para identificar associação e relação de risco entre a presença de PA e as variáveis do estudo. RESULTADOS: Foram encontrados canais não localizados em 18,61% (86/462) e 95,3% estavam associados à PA. A frequência de AP foi de 62,34% (288/462) para todos os dentes avaliados. AP foi encontrada em 27,43% (79/288) dos dentes com tratamento endodôntico adequado, em contraste com 72,57% (209/288) dos dentes com tratamento inadequado (P<0,01). A frequência de canais não localizados foi maior nos molares superiores, com 55,23% (58/105), sendo que 96,55% apresentavam PA. O canal mésio-palatino (MB2) apresentou maior frequência de canal não localizado (88,52% - 54/61), com PA em 90,74% (49/54) dos casos. CONCLUSÃO: Houve alta frequência de dentes com canais não localizados e com PA. Mais da metade dos dentes com canais não localizados eram molares superiores, sendo o MB2 é o canal com a maior frequência, comumente apresentando periodontite apical.

Analysis of the penetration of NaOCl 5.25% into dentinal tubules using different irrigation protocols: An ex vivo study.

The objective of the study was to investigate the 5.25% sodium hypochlorite (NaOCl) penetration into the dentinal tubules after different irrigation methods. Seventy canines were stained with 1% crystal violet and divided into groups (n = 20): GEC-EasyClean; GPUI-E1 Irrisonic ultrasonic insert; GXP-XP-Endo finisher; GPC-conventional irrigation and GNC-stained tooth without irrigation. Axial sections (16×) were assessed and irrigant penetration was quantified as a bleaching halo on the surface of the apical, middle and coronal third. In the apical third, GPUI promoted greater NaOCl penetration (p < 0.05). GXP was better than GEC (p < 0.05), as was GPC (p > 0.05). The GPUI and GXP groups were similar in the middle and coronal third (p > 0.05). GPUI and GXP showed better results than GEC (p < 0.05). GPUI was more effective in the apical third and like GXP in the cervical and middle third.

Analysis of morphology and symmetry of the root canal system of incisors, premolars and mandibular molars using CBCT.

Knowledge of root canal internal anatomy and its variations is important forproper endodontic treatment. It is therefore necessary to investigate morphological aspects among different dental groups in the same patient to define the best protocol for the case. AIM: To evaluate the morphology and symmetry of homologous incisors, premolars and mandibular molars using cone beam computed tomography (CBCT). MATERIALS AND METHOD: Descriptive statistical analysis was performed for the frequency of categorical variables, and a chi-square test or Fisher 's exact test was used to test whether gender and side were associated with number of roots, number of canals, and Vertucci's classification. Forty-five CBCT scans were evaluated, and 444 mandibular teeth were analyzed. The number of roots, number of canals, classification of the canals in each root according to Vertucci and presence of a symmetrical relationship between pairs of posterior teeth were analyzed. RESULTS: The resuls showed that 74% of mandibular central incisors had type I root canal, 26% of mandibular lateral incisors had type I and, with a significant difference in the number of canals between males and females (p < 0.05). In mandibular first premolars, 70.5% had type I; and in mandibular second premolars, 98.5% had type I. Mandibular first molars had two roots in 98% of the cases. Second mandibular molars had two roots in 92.5% of the cases, one root in 6%, and three roots in 1.5%. Symmetry between central incisors was higher in females than in males. CONCLUSIÓN: Teeth of the same group can have different morphologies in the same patient.

0 conhecimento da anatomia interna e suas variagoes anatómicas é fator importante para o adequado tratamento endodóntico. Portanto, é necessário investigar esses aspectos morfológicos entre diferentes grupos dentários de um mesmo paciente para definir o melhor protocolo para o caso. OBJETIVO: Avaliar a morfologia e simetria de incisivos, pré-molares e molares inferiores homólogos por meio de tomografia computadorizada de feixe cónico (TCFC). MATERIAIS E MÉTODO: Foi realizada análise estatística descri-tiva para a frequéncia das variáveis categóricas e foi utilizado o teste do qui-quadrado ou teste exato de Fisher para testar a relagao entre sexo e lado em comparagao com número de raízes, número de canais e classificagao de Vertucci. Quarenta e cinco TCFC foram avaliadas e 444 dentes inferiores foram analisados. Foram considerados: o número de raízes, o número de canais, o tipo dos canais acordo com a classificagao de Vertucci e a presenga de relagao simétrica entre pares de dentes posteriores. RESULTADOS: Os resultados mostraram que 74% dos incisivos centrais inferiores tinham um canal radicular tipo 1 e 26% tinham dois canais; 73% dos incisivos laterais inferiores, 26%oeram do tipo I, tinham um canal e 27% tinham dois canais, com diferenga significativa no número de canais entre os grupos masculino e feminino (p < 0,05). Nos primeiros pré-molares inferiores, tipo I, um canal foi detectado em 70,5% e dois canais em 29,5%; nos segundos pré-molares inferiores, tipo I, um único canal foi detectado em 98,5%. O primeiro molar inferior foi observado com duas raízes em 98% e tres raízes em 2%o. O segundo molar inferior tinha duas raízes em 92,5% dos casos, uma raiz em 6% e tres raízes em 1,5%. A simetria foi maior nas mulheres em comparagao aos homens nos incisivos centrais. CONCLUSÃO: Pode-se concluir que dentes de um mesmo grupo podem apresentar morfologias diferentes no mesmo paciente.

Factors associated to mortality in children with critical COVID-19 and multisystem inflammatory syndrome in a resource-poor setting.

SARS-CoV-2 infection in children is usually asymptomatic/mild. However, some patients may develop critical forms. We aimed to describe characteristics and evaluate the factors associated to in-hospital mortality of patients with critical COVID-19/MIS-C in the Amazonian region. This multicenter prospective cohort included critically ill children (1 mo-18 years old), with confirmed COVID-19/MIS-C admitted to 3 tertiary Pediatric Intensive Care Units (PICU) in the Brazilian Amazon, between April/2020 and May/2023. The main outcome was in-hospital mortality and were evaluated using a multivariable Cox proportional regression. We adjusted the model for pediatric risk of mortality score version IV (PRISMIV) score and age/comorbidity. 266 patients were assessed with 187 in the severe COVID-19 group, 79 included in the MIS-C group. In the severe COVID-19 group 108 (57.8%) were male, median age was 23 months, 95 (50.8%) were up to 2 years of age. Forty-two (22.5%) patients in this group died during follow-up in a median time of 11 days (IQR, 2-28). In the MIS-C group, 56 (70.9%) were male, median age was 23 months and median follow-up was 162 days (range, 3-202). Death occurred in 17 (21.5%) patients with a median death time of 7 (IQR, 4-13) days. The mortality was associated with higher levels of Vasoactive Inotropic-Score (VIS), presence of acute respiratory distress syndrome (ARDS), higher levels of Erythrocyte Sedimentation Rate, (ESR) and thrombocytopenia. Critically ill patients with severe COVID-19 and MIS-C from the Brazilian Amazon showed a high mortality rate, within 12 days of hospitalization.

Renal tubular dysfunction in sickle cell disease.

BACKGROUND/AIMS: Kidney abnormalities are one of the main chronic complications of sickle cell disease (SCD). The aim of this study is to investigate the occurrence of renal tubular abnormalities among patients with SCD. METHODS: This is a prospective study with 26 SCD adult patients in Brazil. Urinary acidification and concentration tests were performed using calcium chloride (CaCl2), after a 12h period of water and food deprivation. Fractional excretion of sodium (FENa), transtubular potassium gradient (TTKG) and solute free water reabsorption (TcH2O) were calculated. The SCD group was compared to a group of 15 healthy volunteers (control group). RESULTS: Patient`s average age and gender were similar to controls. Urinary acidification deficit was found in 10 SCD patients (38.4%), who presented urinary pH >5.3 after CaCl2 test. Urinary osmolality was significantly lower in SCD patients (355 ± 60 vs. 818 ± 202 mOsm/kg, p=0.0001, after 12h period water deprivation). Urinary concentration deficit was found in all SCD patients (100%). FENa was higher among SCD patients (0.75 ± 0.3 vs. 0.55 ± 0.2%, p=0.02). The TTKG was higher in SCD patients (5.5 ± 2.5 vs. 3.0 ± 1.5, p=0.001), and TcH2O was lower (0.22 ± 0.3 vs. 1.1 ± 0.3L/day, p=0.0001). CONCLUSIONS: SCD is associated with important kidney dysfunction. The main abnormalities found were urinary concentrating and incomplete distal acidification defect. There was also an increase in the potassium transport and decrease in water reabsorption, evidencing the occurrence of distal tubular dysfunction. .