Enhancing debris removal in curved canals: a comparative evaluation of XP-endo Finisher and Passive Ultrasonic Irrigation.

OBJECTIVES: The study aimed to compare the efficacy of XP-endo Finisher and Passive Ultrasonic Irrigation (PUI) in removing hard tissue debris from curved canals. MATERIALS AND METHODS: Thirty-four mandibular molars with Vertucci's type II mesial canals were scanned in microcomputed tomography before and after preparation with HyFlex EDM, and accumulated hard tissue debris was quantified. Subsequently, the teeth were randomly divided into two groups according to the supplementary procedure: PUI with the Ultra-X insert or XP-endo Finisher. After the intervention, the specimens underwent another scanning. Two separate analyses were conducted, one for the total canal and another for the isthmus area. Unpaired and paired T-tests were used for inter- and intergroup comparisons, with a significance level set at 5%. RESULTS: Both supplementary methods reduced the amount of debris compared to the initial volume. Remarkably, the XP-endo Finisher achieved a significantly higher percentage of debris removal (71% for the total canal and 74% for the isthmus areas) compared to PUI (41% for the total canal and 52% for the isthmus area) (P < 0.05). CONCLUSIONS: Both supplementary approaches reduced the amount of hard tissue debris from canal preparation, still XP-endo Finisher showed a higher reduction compared to PUI (p < 0.05). CLINICAL RELEVANCE: None of the supplementary methods rendered canals completely free of hard tissue debris. However, the supplementary approach with XP-endo Finisher resulted in lower levels of hard tissue debris than PUI in curved canals with isthmuses.

Influence of conservative endodontic access cavities on instrumentation of oval-shaped straight root canals.

AIM: To evaluate the influence of the design of endodontic access cavities on the percentage of unprepared areas of canal walls and flexural fatigue of instruments activated by reciprocating movement in oval-shaped straight root canals of extracted teeth. METHODOLOGY: Forty-two mandibular incisors with oval canals were scanned by a microcomputed tomography (micro-CT) device for homogeneous selection and distribution of the samples. Then, the teeth were divided into two groups (n = 21) according to the design of access cavity being tested: ultraconservative endodontic access cavity (UltraAC) and traditional access cavity. The canals were accessed with the aid of a surgical microscope, instrumented with the WaveOne Gold Medium system and irrigated with 2.5% NaOCl and 17% EDTA. The unprepared areas of the canal wall were analysed by overlaying images before and after instrumentation and expressed as percentages. micro-CT data were analysed using t-test, Mann-Whitney and Wilcoxon tests. The endodontic instruments used during instrumentation were subjected to static flexural fatigue testing using an artificial stainless steel canal with a 60° angle of curvature and a radius of 5 mm, located 5 mm from the tip of the instrument. The instruments were activated until fracture occurred, and the time in seconds for the fracture was recorded using a digital timer. The number of cycles to fracture was calculated and analysed statistically. For flexural fatigue data, an anova test complemented by a Tukey range test was used. The significance level of 5% was used for all analyses. RESULTS: There was no significant difference between the groups related to unprepared areas by the instrument during canal preparation (p > .05). The difference in flexural fatigue resistance between the groups was not significant. CONCLUSION: The use of UltraAC did not interfere with the canal instrumentation of extracted mandibular incisors with straight and oval canals. There was no difference in the flexural fatigue resistance of the instruments in relation to access cavity design.

Antibacterial and dissolution ability of sodium hypochlorite in different pHs on multi-species biofilms.

OBJECTIVES: The aim of this study was to investigate whether variation in pH of sodium hypochlorite (NaOCl) increased its antibacterial and dissolution ability on polymicrobial biofilms formed in situ. MATERIALS AND METHODS: Fifty-six dentin blocks (eight/group) were intraorally infected for 48 h and incubated in BHI for 48 h to standardize the biofilm growth. The specimens were irrigated with 1 and 2.5% NaOCl with pH levels of 5, 7, and 12 for 20 min. The control group was irrigated with distilled water. The cell viability and the bacterial volume were measured at the pre- and post-irrigation procedures. Five random areas of each sample were chosen and analyzed with confocal laser scanning microscopy (CLSM). Statistical analysis was performed using the non-parametric Kruskal-Wallis and Dunn's tests (p < 0.05). RESULTS: All the experimental solutions were able to decrease the biomass (p < 0.05) except for the 1% NaOCl-pH 5 group. The antibacterial ability of the NaOCl was dependent on the concentration and acidification of the solution. CONCLUSIONS: The acidification of NaOCl improves its antibacterial ability, but the dissolution effect of the irrigant is decreased. CLINICAL RELEVANCE: Bacteria and their products are the main factors in development of apical periodontitis. The pH reduction in the NaOCl could enhance the reduction or elimination of the root canal bacterial colonies in comparison with the unaltered solution.

Apical periodontitis in endodontically-treated teeth: association between missed canals and quality of endodontic treatment in a Colombian sub-population. A cross-sectional study.

A high prevalence of post-treatment apical periodontitis associated to variables such as endodontic treatment quality and missed canals has been reported. AIM: The aim of this study was to evalúate the quality of endodontic treatment and the frequency of missed canals associated with teeth with apicalperiodontitis (AP) through CBCTin a Colombian sub-population. MATERIAL AND METHOD: This was a cross-sectional study assessing 318 cone beam computed tomography (CBCT) scans of endodontically treated teeth from Colombian individuals. The scans were taken using J Morita X550 (J Morita Corporation, Osaka, Japan), with voxel size 0.125 to 0.20 mm. All endodontically treated teeth were assessed for quality of treatment, presence of missed canals and AP. Allsamples were analyzed bytwo endodontics specialists and an radiology specialist. Chi-square or Fisher 's test and odds ratio were calculated to identify the association and risk relationship between the presence of AP and the study variables. RESULTS: Missed canals were found in 18.61% (86/462), and 95.3% were associated with AP. The frequency of AP was 62.34% (288/462) for all the evaluated teeth. AP was found in 27.43 % (79/288) of the teeth with adequate endodontic treatment, in contrast to 72.57% (209/288) of the teeth with inadequate treatment (P<0.01). The frequency of missed canals was highest in maxillary molars, with 55.23% (58/105), with 96.55% presenting AP. The second mesiobuccal canal wasthe most frequently missed canal, 88.52%o(54/61), with AP in 90.74% (49/54) of the cases. CONCLUSIÓN: There was a high frequency of teeth with missed canals and PA. More than half of the teeth with missed canals were maxillary molars, with MB2 being the most common canal, commonly presenting apical periodontitis.

Uma alta prevalência de periodontite apical pós-tratamento associada a variáveis como qualidade do tratamento endodôntico e fracasso do tratamento é relatada na literatura. O objetivo deste estudo foi avaliar a qualidade do tratamento endodôntico e a frequência e fracasso do tratamento associados a dentes com periodontite apical (PA) por meio de tomografia computadorizada de feixe cônico (TCFC) em uma subpopulação colombiana. MATERIAL E MÉTODO: Este foi um estudo transversal que avaliou 318 tomografias computadorizadas de dentes tratados endodonticamente de indivíduos colombianos. Os exames foram realizados utilizando o tomógrafo J Morita X550, com tamanho de voxel de 0,125 a 0,20 mm. Todos os dentes tratados endodonticamente foram avaliados quanto à qualidade do tratamento, presença de canais não localizados e AP. Todas as amostras foram avaliadas por dois especialistas em endodontia e um especialista em radiologia. Foram calculados o teste qui-quadrado ou de Fisher e a razão de chances para identificar associação e relação de risco entre a presença de PA e as variáveis do estudo. RESULTADOS: Foram encontrados canais não localizados em 18,61% (86/462) e 95,3% estavam associados à PA. A frequência de AP foi de 62,34% (288/462) para todos os dentes avaliados. AP foi encontrada em 27,43% (79/288) dos dentes com tratamento endodôntico adequado, em contraste com 72,57% (209/288) dos dentes com tratamento inadequado (P<0,01). A frequência de canais não localizados foi maior nos molares superiores, com 55,23% (58/105), sendo que 96,55% apresentavam PA. O canal mésio-palatino (MB2) apresentou maior frequência de canal não localizado (88,52% - 54/61), com PA em 90,74% (49/54) dos casos. CONCLUSÃO: Houve alta frequência de dentes com canais não localizados e com PA. Mais da metade dos dentes com canais não localizados eram molares superiores, sendo o MB2 é o canal com a maior frequência, comumente apresentando periodontite apical.

Micro-CT Assessment of Filling Removal Effectiveness in the Apical Third of Curved Canals with Different Types of Anatomy.

Introduction: The aim of this study was to assess the effectiveness of filling removal material from the apical third of curved mesial root canals of mandibular molars. Reciprocating instrumentation followed by additional rotary instrumentation with instruments made of alloys with different heat treatments was evaluated. Materials and Methods: Thirty-six mesial roots of mandibular molars were divided into two groups: Group Class IV consisted of 16 roots with two independent canals, and Group Class II consisted of 20 roots with two canals that merged into one at their apical level. Each of these two groups were further divided into two subgroups, according to the additional rotary instrument used after the reciprocating instrumentation: Group RH and Group RM for Hyflex and Mtwo, respectively. After each procedural step, the roots were scanned by micro-tomography. After each step of filling removal, the Wilcoxon matched pair test and the Mann-Whitney test were used for the evaluation between groups. The significance level adopted was 5%. Results: Significant differences were observed between groups with different Class II and Class IV anatomies, regarding filling removal after Reciproc (P<0.05). After the use of an additional rotary instrumentation, no differences were observed between the two groups (P>0.05). Conclusions: In the apical third of mesial roots of mandibular molars with Class II anatomy, an additional rotary instrumentation was shown to be necessary for improving the removal of filling material after using the single-file reciprocating instrumentation technique.

Influence of sealer type on treatment outcome of teeth with apical periodontitis: a systematic review.

BACKGROUND: The purpose of this article was to Evaluate the influence of sealer on the outcome of non-surgical endodontic treatment or retreatment of permanent teeth with apical periodontitis (PROSPERO registration: CRD42020205951). METHODOLOGY: A systematic review of original clinical studies was carried out following PRISMA guidelines to answer whether the type of sealer used in endodontic treatment or retreatment influences the repair of apical periodontitis determined by clinical and radiographic parameters. Electronic searches were performed in PubMed, Embase, Web of Science, Scopus, and the Cochrane Library database, until May 2023. Gray literature and a hand search of reference lists were also performed. The risk of bias was assessed using Cochrane RoB2 for randomized trials and the Newcastle-Ottawa Scale (NOS) for prospective and retrospective cohort and case-control studies. RESULTS: Among 1046 studies, a total of 819 were selected by title and abstract, resulting in 23 for full-text review. In total, 11 studies met the inclusion criteria (1467 patients/teeth with apical periodontitis). The quality assessment using RoB2 included five randomized control trials, of which four had medium risk and one had a low risk of bias. According to the NOS scale, five studies were classified as low risk and one study was considered as medium risk of bias. The sealer type and obturation techniques varied, and the mean follow-up time was 3.7 years. Most studies used two-dimensional radiographic criteria to assess the treatment outcome sealers and not cements. Eight studies did not find significant differences when comparing cements. The healing rates ranged from 56.7% to 90%. CONCLUSIONS: The results of this review support that the current endodontic sealers do not seem to influence the treatment outcome of permanent teeth with apical periodontitis. Although the studies had medium and low risk of bias, the results should be interpreted with caution. More randomized studies of long-term outcomes comparing filling materials are needed to strengthen this claim and allow for a meta-analysis.

Multipopulation evaluation of the internal morphology of mandibular first premolars from different South American countries. A micro-computed tomography study.

OBJECTIVE: To evaluate and compare several anatomical parameters of mandibular first premolars from individuals from different Latin American countries using micro-computed tomography. DESIGN: Five hundred extracted mandibular first premolars from Brazilian, Argentinian, Chilean, Colombian, and Ecuadorian individuals were scanned using micro-computed tomography (n = 100 teeth/country). Root canal configurations were classified according to established parameters. Analyses also included: canal volume and surface area, structure model index, distances from the apical foramen to the root apex or the cementoenamel junction, major/minor apical canal diameters, canal orifice shape, and prevalence of ramifications. RESULTS: A single root was the most common anatomy in all countries (range, 97%-100%). Vertucci's type-I canal was the most frequent configuration (range, 36%-66%), followed by C-shaped and type-V canals. The oval-shaped canal orifice was the most predominant in all countries (range, 34%-58%), followed by the circular shape (range, 16%-47%). C-shaped canals occurred in all subpopulations (range, 14%-26%), always associated with radicular grooves. Ranges for canal ramifications were as follows: accessory canals, 36%-73%; lateral canals, 4%-12%; and apical delta, 4%-14% of the teeth. Many anatomic parameters differed significantly between countries (P < .05). CONCLUSIONS: Vertucci's types-I and -V, and C-shaped canals were the most prevalent configurations in the subpopulations investigated. Accessory canals and several complex anatomies were found, with some significantly different frequencies between countries.

Unprepared areas and centralization of oval canals prepared with WaveOne Gold or XP-endo Shaper: microcomputed tomographic analyses.

Current instrumentation systems cannot fully prepare oval root canal systems. This may cause accumulation of hard tissue debris and fail to eliminate bacteria from areas inaccessible to instrumentation, which could perpetuate periapical inflammation and jeopardize the success of endodontic treatment. Aim: To evaluate the performance of two endodontic systems in oval canals by investigating the changes in volume, unprepared areas, and centering ability of XP-endo Shaper (XPS) and WaveOne Gold (WOG) in oval canals using microcomputed tomography (micro-CT). Materials and Method: Thirty mandibular canines were scanned before and after preparation with WOG (25/.07 and 35/.06) or XPS (30/.01) to evaluate the volume, surface area, and canal centralization at 4 mm and 10 mm from the apical foramen. Results: Volume and surface area increased significantly after preparation with both systems (p<0.05). However, no significant difference was observed in the unprepared areas, regarding either the entire canal (26.21% for WOG and 30.10% for XPS), or the apical segment (18.82% for WOG and 14.63% for XPS) (p >0.05). Conclusions: Both systems maintained canal centralization, with no difference between them. XPS and WOG had similar shaping abilities in the mandibular canine, but left almost one third of the unprepared areas.

Os sistemas de instrumentação atuais são incapazes de preparar completamente os sistemas de canais radiculares do canal oval, o que pode levar ao acúmulo de detritos de tecido duro e manter micro-organismos em áreas inacessíveis à instrumentação. Essas bactérias poderiam perpetuar a inflamação periapical e comprometer o sucesso do tratamento endodôntico. Objetivo: Para avaliar o comportamento de dois sistemas endodônticos em canais ovais, esse estudo investigou as alterações no volume, áreas não preparadas e capacidade de centralização do XP-endo Shaper (XPS) e do WaveOne Gold (WOG) em canais ovais usando microtomografia computadorizada (micro-CT). Material e métodos: Trinta caninos inferiores foram escaneados antes e depois do preparo com WOG (25/.07 e 35/.06) ou XPS (30/.01) para avaliar o volume, a área de superfície e a centralização do canal a 4 mm e 10 mm do forame apical. Resultados: O volume e a área de superfície aumentaram significativamente após o preparo com ambos os sistemas (p<0,05). No entanto, não foram observadas diferenças significativas nas áreas não preparadas, não apenas em todo o canal (26,21% para WOG e 30,10% para XPS), mas também no segmento apical (18,82% para WOG e 14,63% para XPS) (p >0,05). Conclusão: Ambos os sistemas mantiveram a centralização do canal, sem diferenças entre eles. O XPS e o WOG tiveram habilidades de modelagem semelhantes no canino mandibular, mas deixaram quase um terço das áreas do canal sem preparo.

Internal morphology of distal roots of mandibular first molars revealed by computed microtomography.

To evaluate the internal morphology of 100 distal roots of mandibular first molars using micro-CT. Teeth were scanned to characterise: Vertucci type, root length, canal shape, presence and location of accessory canals, and the number of foramina at 4 mm from the apex, presence of root isthmus and the length from the primary canal to the apical foramen. Vertucci type I was found in 57% of cases, followed by V (27%). The most common cross-section 1 mm from the apex was oval (49%) and circular (38%). The average root length was 16.06 mm (16.61-19.02 mm). The mean foramen size was 0.32 and 0.53 mm for the minor and major diameters, respectively. The volume, surface area and SMI were 7.84 mm3 , 68.87 mm2 and 1.52 mm, respectively. Root isthmi were found in 47% of the samples, and the length mean from the primary canal to the apical foramen was 2,03 mm. The internal morphology of the distal roots of mandibular first molars may be complex and shows variations.

Shaping Ability of TRUShape and XP-endo Shaper in C-Shaped Canals Using 3D-Printed Replicas: A Micro-CT Study.

OBJECTIVE: This study compared the shaping ability of TRUShape and XP-endo Shaper systems on C-shaped root canals replicas using microcomputed tomography (micro-CT). MATERIAL AND METHODS: Thirty three-dimensional replicas based on a mandibular second molar classified as C1 type I C-shaped canal were randomly divided into two groups (n = 15): TRUShape (G.TRU) and XP-endo Shaper (G.XP) and instrumented with each system according to the manufacturer's instructions. Changes in volume and surface and the unprepared area of the root canal were measured by scanning on micro-CT before and after instrumentation. RESULTS: The unprepared areas were 39% in the G.TRU and 43% in the G.XP group with no significant difference between them (p > 0.05), but both the tested systems left a high percentage of unprepared root canal walls of C-shaped root canals. CONCLUSION: TRUShape and XP-endo Shaper showed a high rate of unprepared areas with similar results after C-shaped root canals replicas for root canal preparation.

Disinfecting and Shaping Type I C-shaped Root Canals: A Correlative Micro-computed Tomographic and Molecular Microbiology Study.

INTRODUCTION: This ex vivo study compared the disinfection and shaping abilities of 2 preparation protocols in C-shaped canals. METHODS: Mandibular second molars with type I C-shaped canals were pair matched based on micro-computed tomographic (micro-CT) analysis and distributed into 2 groups. The canals were contaminated with a mixed bacterial culture and prepared using 2 protocols, both with 2.5% sodium hypochlorite irrigation: XP-endo Shaper (FKG Dentaire, La Chaux-de-Fonds, Switzerland) supplemented with XP-endo Finisher (FKG Dentaire) (XP-E) and BioRaCe (FKG Dentaire) supplemented with a Hedström file (Dentsply/Sirona, Tulsa, OK) (BR-Hed). Micro-CT scans and intracanal bacteriologic samples were taken before (scan #1 and sample 1) and after preparation (scan #2 and sample 2) and after the supplementary step (scan #3 and sample 3). Canal shaping was evaluated by micro-CT imaging, and disinfection was assessed by quantitative polymerase chain reaction. RESULTS: Micro-CT data from the XP-E (n = 21) and BR-Hed (n = 23) protocols revealed no significant differences between groups regarding shaping parameters (canal volume, surface area, structure model index, and prepared walls) after preparation and after the supplementary step (P > .05). All these parameters significantly increased after each preparation step (P < .05), except for structure model index changes after the XP-endo Finisher (P > .05). Bacteriologic data from the XP-E (n = 21) and BR-Hed (n = 22) groups showed that 14 (66.7%) and 10 (45.5%) S2 samples still had detectable bacteria, respectively. The corresponding figures for supplementary steps with the XP-endo Finisher and Hedström file were 11 (52.4%) and 10 (45.5%), respectively. Bacterial counts in sample 1 significantly decreased in samples 2 and 3 in both groups (P < .01). Intragroup comparison between sample 2 and sample 3 showed a 66% reduction in counts after using the Hedström file and 18% after using the XP-endo Finisher (P > .05 for both groups). The quantitative bacterial reduction was not different between groups (P > .05). CONCLUSIONS: The XP-endo Shaper and BioRaCe systems have similar disinfecting and shaping abilities in C-shaped canals. Supplementary steps with the Hedström file and the XP-endo Finisher were similarly effective in improving shaping, but this was not sufficient to enhance disinfection. About half of the cases, in both groups, still harbored detectable amounts of bacteria.

Supplementing filling material removal with XP-Endo Finisher R or R1-Clearsonic ultrasonic insert during retreatment of oval canals from contralateral teeth.

This study compared the efficacy of XP-Endo Finisher R and R1-Clearsonic insert in removing filling material remnants from oval canals. Twelve pairs of contralateral premolars were treated and subsequently retreated with Reciproc 50. A supplementary procedure with XP-Endo Finisher R or R1-Clearsonic was performed. Micro-computed tomography was used to quantify the filling material volume in the full canal and apical segment lengths. Intragroup analyses revealed significant reduction of filling material after both procedures, not only in the full canal but also in the apical segment (P < 0.05). The amount of filling material removed with XP-Endo Finisher R and R1-Clearsonic was 47.9% and 52.2% in the apical segment (P > 0.05), and 82.1% and 64.6% in the full canal (P < 0.05). None of the instruments was effective in completely removing the filling material from the apical canal, but better results were obtained with XP-Endo Finisher R in the total canal length.

Comparison of limited- and large-volume cone-beam computed tomography using a small voxel size for detecting isthmuses in mandibular molars.

PURPOSE: This study was performed to compare the ability of limited- and large-volume cone-beam computed tomography (CBCT) to display isthmuses in the apical root canals of mandibular molars. MATERIALS AND METHODS: Forty human mandibular first molars with isthmuses in the apical 3 mm of mesial roots were scanned by micro-computed tomography (micro-CT), and their thickness, area, and length were recorded. The samples were examined using 2 CBCT systems, using the smallest voxels and field of view available for each device. The Mann-Whitney, Friedman, and Dunn multiple comparison tests were performed (α=0.05). RESULTS: The 3D Accuitomo 170 and i-Cat devices detected 77.5% and 75.0% of isthmuses, respectively (P>0.05). For length measurements, there were significant differences between micro-CT and both 3D Accuitomo 170 and i-Cat (P<0.05). CONCLUSION: Both CBCT systems performed similarly and did not detect isthmuses in the apical third in some cases. CBCT still does not equal the performance of micro-CT in isthmus detection, but it is nonetheless a valuable tool in endodontic practice.

Shaping ability of reciprocating and rotary systems in oval-shaped root canals: a microcomputed tomography study.

This study compared the shaping ability of single-file reciprocating (WaveOne Gold) and multifile rotary (Mtwo) systems on mandibular oval-shaped canine root canals, using microcomputed tomography (micro-CT). Thirty mandibular canines were scanned by micro-CT and assigned to one of two groups (n=15) according to the system used for root canal preparation: WaveOne Gold or Mtwo. After preparation, the teeth were rescanned, and the percentage of untouched canal area, apical transportation and centering ability were analyzed. The data was evaluated using Kruskal and Mann- Whitney tests (p<0.05). No difference was found in percentage of unprepared canal area between groups in the entire root canal or the apical third, or in centering ability (p>0.05). WaveOne gold had less canal transportation than MTwo at the 5 mm section (p<0.05). WOG and Mtwo systems presented similar shaping ability and centering ability in oval-shaped canals. However, WOG presented less transportation than Mtwo at 5 mm from the apex.

Este estudo comparou a capacidade de modelagem dos sistemas reciprocante de lima única (WaveOne Gold) e rotatórios com múltiplas limas (Mtwo) em caninos ovais inferiores, usando microtomografia computadorizada (micro-CT). Trinta caninos inferiores foram escaneados por micro-CT e divididos em dois grupos (n = 15) de acordo com o sistema usado durante o preparo do canal radicular: WaveOne Gold (WOG) e Mtwo. Os dentes foram reeescaneados e a porcentagem de área do canal não preparada, transporte apical e capacidade de centralização foram analisados. Os dados foram avaliados pelos testes de Kruskal Wallis e Mann-Whitney (p<0,05). Nenhuma diferença foi encontrada na porcentagem de área não preparada entre os grupos em todo o canal radicular e no terço apical e na capacidade de centralização (p>0,05). O sistema WOG promoveu menor transporte do canal do que o sistema Mtwo na região de 5mm aquém do ápice (p<0,05). Os sistemas WOG e Mtwo apresentaram capacidade de modelagem e capacidade de centralização semelhantes em canais ovais. No entanto, WOG promoveu menor transporte do que Mtwo a 5 mm do ápice.

Limitation of diagnostic value of cone-beam CT in detecting apical root isthmuses.

INTRODUCTION: Isthmuses are reported as common anatomic complexities in teeth often associated with failures in endodontic treatment. They should be considered before starting treatment and a preoperative computed tomography scan (CT) may demonstrate these complexities. OBJECTIVE: To assess the diagnostic value of the highest resolution settings of a cone-beam CT (CBCT) system in identifying and measuring apical isthmuses, using micro-CT as reference. METHODOLOGY: After micro-CT scanning, 40 humans' lower first molars with isthmuses in the apical-3 mm of mesial roots were scanned by the highest resolution settings of the New Generation i-Cat ® CBCT equipment. Two blinded observers recorded the detection of isthmuses in CBCT scans. The lengths of isthmuses were compared between micro-CT and CBCT to assess the diagnostic value of CBCT. Quantitative data for sensitivity were represented as percentages (95% confidence interval). The Bland-Altman method was used to assess differences between gold standard lengths (micro-CT) and CBCT lengths. RESULTS: BCT demonstrated 30 positive findings, representing sensitivity for isthmus identification of 75% (95% CI=0.4114-1.1364). Differences between the lengths in micro-CT (1.99±0.40 mm) and CBCT (1.53±0.41 mm) were significant (p<0.0001). CONCLUSION: The CBCT device used presented limited diagnostic value in the identification and measurement of apical isthmuses in the mesial roots of lower molars. In some cases, the actual anatomy of the apical root canal may not be completely delineated in this type of CBCT system, even using the highest resolution settings.

Mechanical Properties of ProTaper Gold, EdgeTaper Platinum, Flex Gold and Pro-T Rotary Systems.

OBJECTIVE: The aim of this study was to evaluate the cyclic fatigue, torsional behavior and bending resistance of EdgeTaper Platinum [ETP (tip 25, taper 0.06)], Flex Gold [FG (tip 25, taper 0.08)], Pro-T [PT (tip 25, taper 0.08)] and ProTaper Gold [PTG (tip 25, taper 0.08)] systems. METHODS: Rotary instruments of ETP, PT, FG, and PTG were used (n=30). Cyclic fatigue tests were performed using an artificial stainless-steel canal with a 60o angle and a 5-mm radius of curvature at body temperature (35°±1°C). The time and number of cycles to fracture (NCF) was recorded. The torsional test evaluated the torque and angle of rotation to failure at 3 mm from the tip according to ISO 3630-1. The fractured surface of each fragment was observed by using scanning electron microscopy (SEM). The bending test evaluated the torque required to bend the instruments at an angular deflection of 60°. Data were analyzed using one-way ANOVA and Tukey tests, and the level of significance was set at 5%. RESULTS: The ETP had highest time until fracture and NCF than all the groups (P<0.05). The PTG had the highest torsional strength, followed by FG (P<0.05). The ETP had the highest angular rotation, followed by PT and PTG (P<0.05). The FG showed the highest bending resistance, followed by the PTG (P<0.05). CONCLUSION: In conclusion, the ETP and PT exhibited higher cyclic fatigue resistance, higher angular deflection values and lower bending force than FG and PTG. The PTG instruments showed the highest torsional strength and the lowest cyclic fatigue resistance.

Accuracy of High-resolution Small-volume Cone-beam Computed Tomography in Detecting Complex Anatomy of the Apical Isthmi: Ex Vivo Analysis.

INTRODUCTION: The purpose of this study was to evaluate the accuracy of small-volume cone-beam computed tomography (CBCT) to detect and measure isthmi in the apical root canals of mandibular molars by using micro-computed tomography (µ-CT) as the reference standard. METHODS: Forty mandibular first molars selected on the basis of µ-CT scan and presenting isthmi in the apical 3-mm mesial roots were scanned by using the highest-resolution settings of a small-volume CBCT unit. Isthmi lengths were measured and compared between both µ-CT and CBCT images to study the accuracy of CBCT readings. Quantitative data for sensitivity rate were depicted as percentage value with 95% confidence interval. Results were analyzed by using linear regression between true lengths (µ-CT) and CBCT lengths, Bland-Altman plot and t test, at α = 0.05. RESULTS: CBCT sensitivity for isthmi detection was 65% (95% confidence interval, 0.4667-0.8333). An average of 74.7% of the lengths could be measured, and differences among the lengths in µ-CT and CBCT were significant (P < .05; mean, 0.756 ± 0.655; t test), showing that there was no agreement between both methods. CONCLUSIONS: Accuracy of identifying apical isthmi of mandibular molars was highly influenced by the evaluation method. Small-volume CBCT imaging could not detect and measure apical isthmi length accurately. Moreover, using high-resolution settings in CBCT, it was not reliable to forecast the actual apical root canal anatomy.

Analysis of mandibular second molars with fused roots and shallow radicular grooves by using micro-computed tomography.

AIM: This study aimed to describe the morphological and morphometric aspects of fused mandibular second molars with radicular shallow grooves using micro-computed tomography (CT). MATERIALS AND METHODS: Eighty-eight mandibular second molars with fused roots were scanned in a micro-CT scanner at a voxel size of 19.6 µm. After reconstruction, only molars without C-shaped roots and presenting shallow radicular grooves were selected. 30 molars were chosen for further analysis. Canal cross-sections were classified according to Fan's modified classification (C1, C2, C3, and C4) and morphometric parameters at the apical region, examination of accessory foramina and tridimensional configuration were evaluated. RESULTS: Three-dimensional reconstructions indicated a higher prevalence of merging type (n = 22). According to Fan's modified classification, the C4 configuration was predominant in the 3 apical mm. Roundness median values revealed a more round-shaped canals at 3 mm (0.72) than at 2 (0.63) and 1 (0.61) mm from the apex. High values of major and minor diameters were observed in the canals of these evaluated sections. In addition, few accessory apical foramina were observed at 1 and 2 mm from the apex. The average distance between last accessory foramina and the anatomic apex was 1.17 mm. A less complex internal anatomy is found when a mandibular second molar presents fused roots with shallow radicular grooves. The merging type canal was frequently observed. Moreover, the C4 configuration was predominant at a point 3 mm from the apex and presented rounded canals, large apical diameters, and few accessory foramina. The cervical and middle thirds presented C3 and C1 canal configurations most frequently. CONCLUSION: A minor morphological complexity is found when fused mandibular second molars present shallow radicular grooves.

Influence of sealer type on treatment outcome of teeth with apical periodontitis: a systematic review

Abstract The purpose of this article was to Evaluate the influence of sealer on the outcome of non-surgical endodontic treatment or retreatment of permanent teeth with apical periodontitis (PROSPERO registration: CRD42020205951). Methodology: A systematic review of original clinical studies was carried out following PRISMA guidelines to answer whether the type of sealer used in endodontic treatment or retreatment influences the repair of apical periodontitis determined by clinical and radiographic parameters. Electronic searches were performed in PubMed, Embase, Web of Science, Scopus, and the Cochrane Library database, until May 2023. Gray literature and a hand search of reference lists were also performed. The risk of bias was assessed using Cochrane RoB2 for randomized trials and the Newcastle-Ottawa Scale (NOS) for prospective and retrospective cohort and case-control studies. Results: Among 1046 studies, a total of 819 were selected by title and abstract, resulting in 23 for full-text review. In total, 11 studies met the inclusion criteria (1467 patients/teeth with apical periodontitis). The quality assessment using RoB2 included five randomized control trials, of which four had medium risk and one had a low risk of bias. According to the NOS scale, five studies were classified as low risk and one study was considered as medium risk of bias. The sealer type and obturation techniques varied, and the mean follow-up time was 3.7 years. Most studies used two-dimensional radiographic criteria to assess the treatment outcome sealers and not cements. Eight studies did not find significant differences when comparing cements. The healing rates ranged from 56.7% to 90%. Conclusions: The results of this review support that the current endodontic sealers do not seem to influence the treatment outcome of permanent teeth with apical periodontitis. Although the studies had medium and low risk of bias, the results should be interpreted with caution. More randomized studies of long-term outcomes comparing filling materials are needed to strengthen this claim and allow for a meta-analysis.

Resumo O objetivo deste artigo foi avaliar a influência do cimento no resultado do tratamento ou retratamento endodôntico não cirúrgico de dentes permanentes com periodontite apical (registro PROSPERO: CRD42020205951). Metodologia: Uma revisão sistemática de estudos clínicos originais foi realizada seguindo as diretrizes PRISMA para responder se o tipo de cimento usado no tratamento ou retratamento endodôntico influencia a reparação da periodontite apical determinada por parâmetros clínicos e radiográficos. Pesquisas eletrônicas foram realizadas no PubMed, Embase, Web of Science, Scopus e no banco de dados Cochrane Library, até maio de 2023. A literatura cinza e uma pesquisa manual das listas de referências também foram realizadas. O risco de viés foi avaliado usando Cochrane RoB2 para os estudos randomizados e Newcastle-Ottawa Scale (NOS) para coorte prospectiva e retrospectiva e estudos de caso-controle. Resultados: Entre 1.046 estudos, um total de 819 foram selecionados por título e resumo, resultando em 23 para revisão de texto completo. No total, 11 estudos preencheram os critérios de inclusão (1.467 pacientes/dentes com periodontite apical). A avaliação de qualidade usando RoB2 incluiu cinco estudos randomizados de controle, dos quais quatro tinham risco médio e um tinha baixo risco de viés. De acordo com a escala NOS, cinco estudos foram classificados com baixo risco e um estudo foi considerado com médio risco de viés. O tipo de cimento e as técnicas de obturação variaram, e o tempo médio de acompanhamento foi de 3,7 anos. A maioria dos estudos utilizou critérios radiográficos bidimensionais para avaliar o resultado do tratamento. Oito estudos não encontraram diferenças significativas ao comparar os cimentos. As taxas de reparação variaram de 56,7% a 90%. Conclusões: Os resultados desta revisão suportam que os cimentos endodônticos atuais não parecem influenciar o resultado do tratamento de dentes permanentes com periodontite apical. Embora os estudos tiveram médio e baixo risco de viés, os resultados devem ser interpretados com cautela. Mais estudos randomizados de resultados de longo prazo comparando materiais de obturação são necessários para fortalecer essa afirmação e permitir uma meta-análise.

Unprepared areas and centralization of oval canals prepared with WaveOne Gold or XP-endo Shaper: microcomputed tomographic analyses / Areas não preparadas e centralização de canais ovais preparados com WaveOne Gold ou XP-endo Shaper: análises tomográficas microcomputadorizadas

ABSTRACT Current instrumentation systems cannot fully prepare oval root canal systems. This may cause accumulation of hard tissue debris and fail to eliminate bacteria from areas inaccessible to instrumentation, which could perpetuate periapical inflammation and jeopardize the success of endodontic treatment Aim To evaluate the performance of two endodontic systems in oval canals by investigating the changes in volume, unprepared areas, and centering ability of XP-endo Shaper (XPS) and WaveOne Gold (WOG) in oval canals using microcomputed tomography (micro-CT) Materials and Method Thirty mandibular canines were scanned before and after preparation with WOG (25/.07 and 35/.06) or XPS (30/.01) to evaluate the volume, surface area, and canal centralization at 4 mm and 10 mm from the apical foramen Results Volume and surface area increased significantly after preparation with both systems (p<0.05). However, no significant difference was observed in the unprepared areas, regarding either the entire canal (26.21% for WOG and 30.10% for XPS), or the apical segment (18.82% for WOG and 14.63% for XPS) (p >0.05) Conclusions Both systems maintained canal centralization, with no difference between them. XPS and WOG had similar shaping abilities in the mandibular canine, but left almost one third of the unprepared areas.

RESUMO Os sistemas de instrumentação atuais são incapazes de preparar completamente os sistemas de canais radiculares do canal oval, o que pode levar ao acúmulo de detritos de tecido duro e manter micro-organismos em áreas inacessíveis à instrumentação. Essas bactérias poderiam perpetuar a inflamação periapical e comprometer o sucesso do tratamento endodôntico Objetivo Para avaliar o comportamento de dois sistemas endodônticos em canais ovais, esse estudo investigou as alterações no volume, áreas não preparadas e capacidade de centralização do XP-endo Shaper (XPS) e do WaveOne Gold (WOG) em canais ovais usando microtomografia computadorizada (micro-CT) Material e métodos Trinta caninos inferiores foram escaneados antes e depois do preparo com WOG (25/.07 e 35/.06) ou XPS (30/.01) para avaliar o volume, a área de superfície e a centralização do canal a 4 mm e 10 mm do forame apical Resultados O volume e a área de superfície aumentaram significativamente após o preparo com ambos os sistemas (p<0,05). No entanto, não foram observadas diferenças significativas nas áreas não preparadas, não apenas em todo o canal (26,21% para WOG e 30,10% para XPS), mas também no segmento apical (18,82% para WOG e 14,63% para XPS) (p >0,05) Conclusão Ambos os sistemas mantiveram a centralização do canal, sem diferenças entre eles. O XPS e o WOG tiveram habilidades de modelagem semelhantes no canino mandibular, mas deixaram quase um terço das áreas do canal sem preparo.