RESUMEN
We demonstrate frequency offset locking between two laser sources using a waveguide-type electro-optic modulator (EOM) with 10th-order sidebands for magneto-optical trapping of Fr atoms. The frequency locking error signal was successfully obtained by performing delayed self-homodyne detection of the beat signal between the repumping frequency and the 10th-order sideband component of the trapping light. Sweeping the trapping-light and repumping-light frequencies with keeping its frequency difference of 46 GHz was confirmed over 1 GHz by monitoring the Doppler absorption profile of I2. This technique enables us to search for a resonance frequency of magneto-optical trapping of Fr.
RESUMEN
One distinctive trait of kendo, the Japanese martial art of fencing, is the execution of sustained, high-effort vocalizations during actions. The purpose of this study was to determine the effect of these vocalizations on respiratory functions. First, the intensity of 3 kendo exercises was quantified by measuring oxygen uptake (VÌO2) and comparing it with VÌO2max measured during treadmill tests of 8 university kendo athletes. Respiratory variables of these 8 athletes were then analyzed using a portable breath gas analyzer during the most intensive kendo exercise, kakari-keiko, with and without vocalization. Breathing frequency (fB) increased regardless of vocalization, but in trials with vocalization, fB and ventilation were significantly lower, and expiration time was significantly longer. Components of expired gases were also affected by vocalization. Although there was no significant difference in oxygen uptake, vocalization yielded a reduction in carbon dioxide output (VÌCO2) and an increase in fraction of end-tidal carbon dioxide (FetCO2). We thus conclude that these vocalizations greatly affect expiration breathing patterns in kendo. Moreover, repetition of kakari-keiko caused a reduction in VÌCO2 and an increase in FetCO2 and CO2 storage. We consider the possibility that the sustained high-effort vocalizations of kendo also increase cerebral blood flow.
Asunto(s)
Dióxido de Carbono/metabolismo , Ejercicio Físico/fisiología , Artes Marciales/fisiología , Voz/fisiología , Adolescente , Pruebas Respiratorias/métodos , Prueba de Esfuerzo , Humanos , Masculino , Oxígeno/metabolismo , Respiración , Adulto JovenRESUMEN
The direct 3α decay branch from the 02+ state at Ex=7.65 MeV in 12C, which is known as the Hoyle state, is considered to affect the triple-α reaction rate strongly and to give crucial information on its structure. We have performed a high-precision measurement of the 3α decay from this state using the 12C(12C,3α)12C reaction at E12C=110 MeV. The branching ratio of the direct 3α decay was under the detection limit in the present experiment. By comparing with Monte Carlo simulations for three decay mechanisms as the sequential decay through the ground state of ^{8}Be, the direct decay with equal energies of three α particles, and the direct decay to the phase space uniformly, we have obtained the upper limit of 0.2% on the direct 3α decay.
RESUMEN
We present here the first evidence of photodesorption induced by low-intensity non-resonant light from an yttrium thin foil, which works as a neutralizer for Rb and Fr ions beam. Neutral atoms are suddenly ejected from the metal surface in a pulsed regime upon illumination with a broadband flash light and then released in the free volume of a pyrex cells. Here atoms are captured by a Magneto-Optical Trap (MOT), which is effectively loaded by the photodesorption. Loading times of the order of the flash rise time are measured. Desorption is also obtained in the continuous regime, by exploiting CW visible illumination of the metallic neutralizer surface. We demonstrate that at lower CW light intensities vacuum conditions are not perturbed by the photodesorption and hence the MOT dynamics remains unaffected, while the trap population increases thanks to the incoming desorbed atoms flux. Even with the Y foil at room temperature and hence with no trapped atoms, upon visible illumination, the number of trapped atoms reaches 10(5). The experimental data are then analyzed by means of an analytical rate equation model, which allows the analysis of this phenomenon and its dynamics and allows the determination of critical experimental parameters and the test of the procedure in the framework of radioactive Francium trapping. In this view, together with an extensive investigation of the phenomenon with (85)Rb, the first demonstration of the photodesorption-aided loading of a (210)Fr MOT is shown.
RESUMEN
Francium is the heaviest species among the alkali elements. Due to its properties, francium is said to be of advantage in measurements of tiny observations, such as atomic parity violation and electric dipole moment. Before executing experiments with francium, it must be produced artificially because it is one of the most unstable elements. We produced francium with the nuclear fusion reaction of an oxygen beam and gold target, ionized the produced francium through a thermal ionization process, and extracted the ion with electrostatic fields. However, the thermal ionization process is known to ionize not only an objective atom but also other atomic species. Therefore, a Wien filter was installed to analyze the composition of the ion beam and purify the beam. This allowed us to improve the beam purity from â¼10(-6) to â¼10(-3).
RESUMEN
AIM: This randomized controlled study was designed to examine the effects of reduced coenzyme Q10 (ubiquinol; CoQ10) supplementation on blood pressure (BP) and exercise-induced muscle damage in kendo athletes during a 4-day kendo training camp. METHODS: In a double-blinded manner, 32 young kendo athletes were randomly assigned to supplement with either placebo or CoQ10 (600 mg) daily for 11 days from 1 week prior to camp to end of camp. BP was measured every morning after waking up during the training camp. Blood samples were taken at 3 time points; 1 week and 1 day prior and upon completion of training camp at 17:30. Statistical analysis was performed by repeated-measures analysis of variance followed by Bonferroni/Dunn post-hoc tests. RESULTS: Before the training camp started, there were no differences in diastolic BP between these groups. However, after kendo training started, diastolic BP in the CoQ10 group was significantly lower than that in the placebo group (P<0.05). Plasma creatine kinase (CK) and myoglobin (Mb) concentrations were significantly increased in both groups during the camp (P<0.05), whereas there were no significant differences in CK and Mb between CoQ10 and placebo groups (CK: P=0.82, Mb: P=0.69). CONCLUSION: Oral supplementation with reduced form of CoQ10 (ubiquinol; Kaneka QHTM) showed a significant hypotensive effect in young male kendo athletes during a 4-day kendo training camp, although it did not significantly ameliorate kendo exercise-induced muscle damage.
Asunto(s)
Presión Sanguínea/efectos de los fármacos , Artes Marciales/fisiología , Músculo Esquelético/efectos de los fármacos , Ubiquinona/análogos & derivados , Biomarcadores/sangre , Creatina Quinasa/sangre , Suplementos Dietéticos , Método Doble Ciego , Humanos , Masculino , Mioglobina/sangre , Educación y Entrenamiento Físico , Ubiquinona/administración & dosificación , Adulto JovenRESUMEN
The effect of 14 days of spaceflight on the vertebrae of rapidly growing rats was studied. The hardness of the vertebrae was measured with a Knoop microhardness tester, and bone mineral density was measured from X-ray photographs. Histomorphometric examination was performed with a microcomputer-aided system. No significant difference (P > 0.05) was observed between flight rats and ground controls with regard to mechanical hardness or bone mineral density. However, histological examination revealed irregular thickening of the endosteal surface of cortical bone in the flight rats, whereas it was uniform in the ground controls. The relative area of lamellar bone showed a significant reduction (P < 0.001) in the flight rats. These findings suggest that the structural disturbances were due to retardation of endosteal modeling and remodeling. We conclude that delay of vertebral maturation can occur in rapidly growing rats after even short-term exposure to microgravity.
Asunto(s)
Vuelo Espacial , Vértebras Torácicas/crecimiento & desarrollo , Animales , Reposo en Cama/efectos adversos , Fenómenos Biomecánicos , Densidad Ósea/fisiología , Dureza , Procesamiento de Imagen Asistido por Computador , Masculino , Radiografía , Ratas , Ratas Sprague-Dawley , Vértebras Torácicas/anatomía & histología , Vértebras Torácicas/diagnóstico por imagenRESUMEN
In this study, we examined the rheological properties of elastomeric impression materials, both before and during setting, to assess the clinical significance of certain key characteristics such as viscosity, pseudoplasticity, and the rate of development of elasticity. The hypothesis to be tested was that monitoring the change in tan delta is the most appropriate means of monitoring the setting characteristics of elastomers. The loss tangent (tan delta) and the dynamic viscosity (eta') for five impression materials (both unmixed pastes and mixed/setting materials) were measured by means of a controlled-stress rheometer in a cone/plate configuration. For unmixed pastes, tests were performed at various frequencies (0.1 to 10 Hz) and torques (from 1 to 50 x 10(-4) Nm), while testing on setting materials was performed at constant frequency (1 Hz) and torque (3 x 10(-3) Nm). Most base and catalyst pastes were pseudoplastic before being mixed. Immediately after being mixed, the polyether (tan delta = 9.85) and polysulfide (tan delta = 9.54) elastomers showed tan delta markedly higher than those of other mixed materials (tan delta = 4.96 to 3.01). The polyvinylsiloxane elastomers showed lower initial tan delta, which rapidly reduced even further with time. This suggests that these materials should be used as soon as possible after being mixed. The polyether elastomer had a comparatively long induction period during which the tan delta remained at a high value. These characteristics are thought to be key factors in controlling clinical efficacy and therefore support the hypothesis that monitoring tan delta is an appropriate method for evaluating the setting characteristics of elastomers. One limitation was that the controlled-stress rheometer was unable to monitor rheological properties through to completion of setting.
Asunto(s)
Materiales de Impresión Dental/química , Elastómeros de Silicona/química , Ensayo de Materiales/instrumentación , Ensayo de Materiales/métodos , Ensayo de Materiales/estadística & datos numéricos , Pomadas , Reología/instrumentación , Reología/métodos , Reología/estadística & datos numéricos , Torque , ViscosidadRESUMEN
OBJECTIVES: The present investigation was undertaken to determine the reinforcing effect of woven glass fibers on deflection, flexural strength, flexural modulus and impact strength of acrylic denture base polymer. METHODS: Three silanized or unsilanized woven glass fibers were used. Specimens were made by heating the denture cure resin dough containing glass fibers, which were sheathed in the dough. Specimens with four different thicknesses and of five different types were made, incorporating the glass fiber. Three-point flexural test and flywheel type impact test were employed to determine the flexural properties and impact strength. RESULTS: When specimens contained unsilanized glass fiber, the flexural strength in specimens of 1 and 2 mm thickness and the impact strength in specimens of 2 mm thickness were higher than those of specimens without glass fiber (p < 0.01). On the contrary, the flexural strength and deflection in specimens reinforced with silanized glass fiber of 1 mm thickness were significantly higher (p < 0.01, p < 0.05) than those of unreinforced specimens. Further, the impact strength in specimens reinforced with silanized glass fiber of 2 mm thickness was significantly higher (p < 0.01) than that of unreinforced specimens. Statistically significant differences were found in the flexural strength (p < 0.05) and in the impact strength (p < 0.01) when specimens of 4 mm thickness were reinforced with two or three unsilanized glass fibers. SIGNIFICANCE: The reinforcement with glass fiber was effective in thin specimens, and the reinforcing effect increased with the increase of the number of glass fibers in the case of thick specimens.
Asunto(s)
Resinas Acrílicas/química , Bases para Dentadura , Vidrio/química , Algoritmos , Análisis de Varianza , Elasticidad , Furanos/química , Humanos , Ensayo de Materiales , Metacrilatos/química , Metilmetacrilato/química , Microscopía Electrónica de Rastreo , Docilidad , Polimetil Metacrilato/química , Silanos/química , Dióxido de Silicio/química , Solubilidad , Solventes/química , Estrés Mecánico , Propiedades de SuperficieRESUMEN
OBJECTIVES: The purpose of this study was: (1) to examine the light transmittance characteristics of various shades of light-cured composite resins, and (2) to evaluate the effect of light transmittance characteristics on the color of the resins. METHODS: Eleven shades of two composite resins were used. Specimens with four different thicknesses (0.5, 1.0, 2.0 and 3.0 mm) were prepared. The transmittance at wavelengths from 400 to 700 nm was measured. Also, the color values and the color differences among thicknesses of a specimen on the CIE L*a*b* color system were determined by a digital chroma meter. The differences in the transmittance, color values and color difference were determined by using a one-way analysis of variance (ANOVA) combined with a Tukey multiple-range test. RESULTS: Significant differences were found in the wavelength dependence of transmittance between the two materials, and among shades of each material. The transmittances of the darker shades of one material were significantly lower at lower wavelengths than the other shades, but were nearly equal or significantly higher at higher wavelengths. There was a significant correlation between the changing ratio of transmittance and the color difference. Two materials showed significant differences in delta a* and delta b* of the chromatic component of color difference. SIGNIFICANCE: The results of this study indicate that light transmittance characteristics, including the wavelength dependence, play an important role for the color of a composite resin. The significant difference in light transmittance characteristics among materials and shades will affect their clinical appearance.
Asunto(s)
Resinas Compuestas/química , Coloración de Prótesis , Análisis de Varianza , Color , Luz , Dispersión de Radiación , Estadísticas no ParamétricasRESUMEN
The dynamic shear moduli of human dentin and enamel were measured using a torsion pendulum over a temperature range from 23 to 150 degrees C. For dentin, the shear modulus slightly increased for temperatures near 50 to 100 degrees C, which was caused by a loss of free water. The peak in the loss tangent was observed near 75 degrees C. The shear moduli at 37 degrees C for sixty coronal dentin specimens ranged from 5.77 X 10(10) to 1.16 X 10(11) dyn/cm2. For enamel, the shear modulus and the loss tangent were markedly stable and independent of the temperature. The shear moduli at 37 degrees C for forty specimens ranged from 2.35 X 10(11) to 4.48 X 10(11) dyn/cm2. Enamel had a modulus which was approximately three to five times higher, and a lower loss tangent than those of dentin. For both dentin and enamel, there were no significant correlations between the values of the shear modulus and sex, age or tooth type.
Asunto(s)
Esmalte Dental , Dentina , Análisis del Estrés Dental , Humanos , DienteRESUMEN
The adhesive strength of porcelain artificial teeth and polymethylmethacrylates (PMMAs), which contained silanes with various number of vinyl or ethoxy groups, and the mechanical and physical properties of the PMMAs were measured. Four types of PMMAs with silanes showed high adhesive shear strength and caused fractures in the porcelain. Water absorption of the PMMAs increased with the addition of silane, but that of one type with silane was almost the same as the PMMA only type. The flexural strengths of the PMMAs with silane, except for one type, showed no significant differences compared with that of PMMA (p < 0.05). The Tg levels of all PMMAs with silane fell less than that of PMMA. From these results, it was found that PMMA with silane from three vinyl groups and one ethoxy group showed excellent chemical bonding to porcelain and low water absorption.
Asunto(s)
Resinas Acrílicas/química , Recubrimiento Dental Adhesivo , Materiales Dentales/química , Bases para Dentadura , Polimetil Metacrilato/química , Silanos/química , Absorción , Adhesividad , Análisis de Varianza , Porcelana Dental , Elasticidad , Ensayo de Materiales , Docilidad , Estadísticas no Paramétricas , Diente Artificial , Agua/químicaRESUMEN
The purpose of this study was to investigate a method for evaluating color stability of light-cured composite resins using an experimental filter that simulates human enamel. The light transmission coefficients and their spectral distributions from 400 to 600 nm of twelve enamel specimens were measured. The experimental filter was designed so that its light transmittance characteristics were similar to those of enamel. Color stability tests for ten shades of two light-cured composite resins, which were irradiated directly and indirectly through the experimental filter with a light source, were performed. Despite different irradiation procedures, most materials exhibited significant color changes in the color stability test. Although the differences were small, the group of specimens irradiated indirectly through the filter showed significantly higher color differences in comparison with those irradiated directly. Our results indicate that the light attenuating effect of enamel affects the color stability of light-cured composite resins.
Asunto(s)
Resinas Compuestas/química , Materiales Dentales/química , Coloración de Prótesis , Color , Esmalte Dental/química , Filtración/instrumentación , Humanos , Luz , FotoquímicaRESUMEN
To elucidate the effects of thermal cycling on the viscoelastic properties of four commercial resins for crown and bridge, dynamic shear modulus (G'), mechanical loss tangent (tan delta), Knoop hardness, water sorption and appearance of specimen surfaces before and after thermal cycling test were determined. The changes of G' and tan delta for two materials were insignificant with increased repetitions of thermal cycling. Those of the other two materials were statistically significant: in particular, G' at temperatures above 60 degrees C was inclined to increase slightly and tan delta decreased considerably. While the Knoop hardness of the materials was a little decreased over a number of 75,000 thermal cycles, the water sorption almost attained an equilibrium in uptake after 14,000 thermal cycles. Furthermore, cracks on the specimen surface were observed after 37,500 to 75,000 thermal cycles. From these results, the deterioration of materials was observed as damage to the specimen surface. Moreover, it could be presumed that the materials would be further polymerized during the period of thermal cycling.
Asunto(s)
Resinas Compuestas/química , Coronas con Frente Estético , Análisis de Varianza , Elasticidad , Dureza , Calor , Ensayo de Materiales , Polímeros/química , Estadísticas no Paramétricas , Propiedades de Superficie , Viscosidad , HumectabilidadRESUMEN
The deterioration of the mechanical properties of composite resins was examined. The bending strength and the stress relaxation rate for sixteen experimental composite resins with different filler shapes, particle sizes and filler contents immersed in distilled water for 0-60 days were measured. The bending strength of all of the composites decreased with the increase of the immersion time in water. The composites with a high filler content (65 vol%) showed a greater decreasing ratio of bending strength than those with low filler content (40 vol%). The stress relaxation rate also increased with and increase of immersion time. The phenomena may be caused by the hydrolytic degradation of the silane coupling agent (gamma-MPTMS).
Asunto(s)
Resinas Compuestas/química , Metacrilatos/química , Silanos/química , Bisfenol A Glicidil Metacrilato/química , Composición de Medicamentos , Hidrólisis , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Tamaño de la Partícula , Docilidad , Polietilenglicoles/química , Ácidos Polimetacrílicos/química , Gravedad Específica , Estrés Mecánico , Factores de Tiempo , Agua/químicaRESUMEN
Doctoral recipients in clinical psychology scored higher than doctoral recipients in counseling psychology on the national licensing exam, the Examination for Professional Practice in Psychology. The largest discrepancies between the 2 groups were on Subtest I (diagnosis), Subtest II (intervention), and Subtest III (research). The differences were less large for Subtest IV (professional/ethical/legal issues) and for Subtest V (social application). The authors recommend that both counseling and clinical psychology graduate students take more course work in the department of the other discipline.
Asunto(s)
Consejo/educación , Práctica Profesional , Psicología Clínica/educación , Evaluación Educacional , HumanosRESUMEN
The present research is an examination of the parameters and correlates of kanashibari, operationally defined as being unable to move upon awakening or before falling asleep. Nonclinical Japanese individuals (N = 720), 34% of whom reported an experience of kanashibari at least once, were administered D. I. Templer's (1970) Death Anxiety Scale, R. Brown's (1990) Locus of Control Scale, and a questionnaire devised by the authors to collect information about kanashibari. The results showed that the kanashibari experience was positively correlated with death anxiety, with being a woman, and with external-other locus of control; this last measure assessed the extent to which these individuals felt that their lives were determined by fate, good luck, or chance.