Fabrication of Soft Transparent Patient-Specific Vascular Models with Stereolithographic 3D printing and Thiol-Based Photopolymerizable Coatings.

An ideal vascular phantom should be anatomically accurate, have mechanical properties as close as possible to the tissue, and be sufficiently transparent for ease of visualization. However, materials that enable the convergence of these characteristics have remained elusive. The fabrication of patient-specific vascular phantoms with high anatomical fidelity, optical transparency, and mechanical properties close to those of vascular tissue is reported. These final properties are achieved by 3D printing patient-specific vascular models with commercial elastomeric acrylic-based resins before coating them with thiol-based photopolymerizable resins. Ternary thiol-ene-acrylate chemistry is found optimal. A PETMP/allyl glycerol ether (AGE)/polyethylene glycol diacrylate (PEGDA) coating with a 30/70% AGE/PEGDA ratio applied on a flexible resin yielded elastic modulus, UTS, and elongation of 3.41 MPa, 1.76 MPa, and 63.2%, respectively, in range with the human aortic wall. The PETMP/AGE/PEGDA coating doubled the optical transmission from 40% to 80%, approaching 88% of the benchmark silicone-based elastomer. Higher transparency correlates with a decrease in surface roughness from 2000 to 90 nm after coating. Coated 3D-printed anatomical replicas are showcased for pre-procedural planning and medical training with good radio-opacity and echogenicity. Thiol-click chemistry coatings, as a surface treatment for elastomeric stereolithographic 3D-printed objects, address inherent limitations of photopolymer-based additive manufacturing.

Impacts of vegetable processing and cheese making effluent on soil microbial functional diversity, community structure, and denitrification potential of land treatment systems.

The cheese making and vegetable processing industries generate immense volumes of high-nitrogen wastewater that is often treated at rural facilities using land applications. Laboratory incubation results showed denitrification decreased with temperature in industry facility soils but remained high in soils from agricultural sites (75% at 2.1°C). 16S rRNA, phospholipid fatty acid (PLFA), and soil respiration analyses were conducted to investigate potential soil microbiome impacts. Biotic and abiotic system factor correlations showed no clear patterns explaining the divergent denitrification rates. In all three soil types at the phylum level, Actinobacteria, Proteobacteria, and Acidobacteria dominated, whereas at the class level, Nitrososphaeria and Alphaproteobacteria dominated, similar to denitrifying systems such as wetlands, wastewater resource recovery facilities, and wastewater-irrigated agricultural systems. Results show that potential denitrification drivers vary but lay the foundation to develop a better understanding of the key factors regulating denitrification in land application systems and protect local groundwater supplies. PRACTITIONER POINTS: Incubation study denitrification rates decreased as temperatures decreased, potentially leading to groundwater contamination issues during colder months. The three most dominant phyla for all systems are Actinobacteria, Proteobacteria, and Acidobacteria. The dominant class for all systems is Nitrosphaeria (phyla Crenarchaeota). No correlation patterns between denitrification rates and system biotic and abiotic factors were observed that explained system efficiency differences.

Quantifying the resistance of mixed-forests against natural hazards in the Pyrenees.

Mountain protection forests can prevent natural hazards by reducing their onset and propagation probabilities. In fact, individual trees act as natural barriers against hydrogeomorphic events. However, assessing the structural strength of trees against these hazards is challenging, especially in a context of climate change due to the intensification of extreme events and changes in forest dynamics. Here, we focus on the mechanical analyses of two of the most common tree species across the Pyrenees (Abies alba Mill. and Fagus sylvatica L.) growing in two different areas (Spain and France), and affected by recurrent snow avalanche and rockfall events. We first performed 53 pulling test on mature trees, where the root-plate stiffness and the modulus of elasticity of the stems were evaluated. To further analyse the impact of forest management and climate on protective forests, we yielded information on tree growth using dendroecology techniques. Then, we assessed structure and neighbourhood characteristics for each target tree to account for the surrounding forest structure. Finally, using linear and structured equation models we tested if the mechanical capacity of the trees is determined either by functional traits (e.g. species, tree growth, diameter and height) or forest structural traits (e.g. tree density, tree structure and slenderness) or both. Our results suggest that the forest neighbourhood influences tree mechanical capacity through two pathways, including both functional and structural traits. The individual stiffness parameter of trees is influenced by their functional traits, while their structural traits are more closely related with changes in the modulus of elasticity. Both species exhibit varying levels of dominance in different locations, which is related to their resilience to the diverse natural hazards they confront. Our findings provide relevant insights to anticipating management strategies for forests that serve as a protective barrier against natural hazards in the context of a changing climate.

Effectiveness of Residue and Tillage Management on Runoff Pollutant Reduction from Agricultural Areas.

Reduced tillage management conservation practices (No-till and Reduced-till) are widely adopted in agriculture; however, understanding their overall effectiveness for water quality protection is challenging. A meta-analysis was conducted to understand and quantify the effectiveness of residue and tillage management on runoff, sediment, and nutrient losses from agricultural fields. Annual runoff and the associated sediment, and nutrient (nitrogen and phosphorus) loads were compiled from 60 peer reviewed research articles published across the United States and Canada. A total of 1575 site-years of data were categorized into tillage (<30% surface cover), no-tillage (<30% surface cover), tillage with residue (>30% surface cover), no-tillage with residue (>30% surface cover), and pasture management. No-tillage, no-tillage-residue, and tillage-residue managements were evaluated for their effectiveness in reducing runoff, nutrients, and sediment loads compared to tillage. Synthesized and surveyed corn yield data were used to evaluate the economic cost effectiveness of no-tillage-residue management with respect to tillage. Across the site years (1968-2019) studied, median runoff depth for no-tillage and no-tillage-residue were 84% and 70% greater than tillage and tillage-residue management, respectively. No-tillage-residue management had up to 86% less sediment losses than tillage systems, on average, for both >30% and <30% surface cover. No-tillage-residue management was most effective, with a positive performance effectiveness of 65% to 90% in controlling sediments, particulate, and total nutrient losses in runoff compared to tillage. Cost effectiveness analysis revealed the benefits of no-tillage-residue management in reducing nutrient loads and increasing net-farm revenue by avoiding tillage operational costs. Except for dissolved phosphorus, no-tillage-residue management cost effectiveness for sediments and nutrient loads ranged from negative $6 to negative $102 per every Mg or kg of load reduction, indicating it had both economic and environmental benefits compared to tillage management. Overall, these results indicate that over the long-term, no-tillage and tillage, combined with greater than 30% residue cover, can effectively reduce sediment and nutrient losses. This work highlights the importance of crop residues on the soil surface to reduce runoff losses, even in no-tillage systems.

Anemia hemolítica por anticuerpos del sistema ABO o Rh en pacientes receptores de trasplante de órgano sólido / Hemolytic anemia due to ABO or Rh antibodies in recipients of solid organ transplants

FUNDAMENTO Y OBJETIVO: La aparición de anemia hemolítica por incompatibilidad menor ABO o Rh en los receptores de trasplantes de órgano sólido es debida al paso con el órgano trasplantado de linfocitos con información inmunológica. El desarrollo de anticuerpos y hemólisis depende de la cantidad de linfocitos que acompañan al órgano trasplantado. Se presentan 5 casos de pacientes que desarrollaron anemia hemolítica, dos por el sistema ABO y tres por el sistema Rh. PACIENTES Y MÉTODO: Desde enero de 1991 a junio de 2001 se realizaron en nuestro centro 22 trasplantes hepáticos ABO no idénticos, 236 trasplante renales Rh no idénticos y 240 trasplantes hepáticos Rh no idénticos. En los donantes y receptores se realizó un estudio detallado de determinación de grupo sanguíneo y escrutinio de anticuerpos irregulares (EAI) por medio de la prueba de antiglobulina indirecta (PAI). Cuando la PAI fue positiva se identificó el anticuerpo por diferentes paneles comerciales de hematíes. En caso de sospecha de hemólisis se realizó la prueba de antiglobulina directa (PAD) y posteriormente se determinó la especificidad del anticuerpo. RESULTADOS: Desarrollaron anemia hemolítica dos trasplantados hepáticos ABO no idénticos y tres trasplantados Rh no idénticos (uno renal y dos hepáticos). La hemólisis fue grave en todos y se presentó entre los días 8 y 40 postrasplante. El EAI fue negativo en todos los receptores pretrasplante. En los donantes se determinó la presencia de anti-D en dos casos. En el postrasplante la PAD y PAI fueron positivas en todos los pacientes, determinándose la presencia de anti-A en dos, anti-D en dos y anti-E en uno. Los pacientes fueron tratados con glucocorticoides intravenosos. Cuatro requirieron transfusión de concentrados de hematíes. CONCLUSIÓN: La aparición de un cuadro anémico en el contexto de un trasplante de órgano sólido con incompatibilidad menor ABO o Rh debe hacer pensar en la posibilidad de hemólisis secundaria al paso de linfocitos del donante (AU)